Search Results

Search found 19385 results on 776 pages for 'canonical link'.

Page 709/776 | < Previous Page | 705 706 707 708 709 710 711 712 713 714 715 716  | Next Page >

• Why can't I connect to remote Microsoft SQL Server through SSH tunnel?

  - by Alexander

  I have at home a D-Link DIR-615 C1 router with DD-WRT. I set up the SSH server on the router, and log on through an SSH2-RSA passphrase-protected key. That router is the gateway between the local network and the internet. One of the computers on that network has Microsoft SQL Server 2008 installed, with TCP/IP protocol enabled through port 1433. I've set up port forwarding on the router, so that remote connections are possible and are, in fact, working (some developers log on remotely without problems). I am part of another network, that has internet access through a proxy server, which only has ports 80 and 443 opened. I can't connect to that MSSQL server on that remote server because 1433 port is closed on this network. I connected (using Putty) through 443 port to my router's SSH server, and set up 2 tunnels. One is for RDP (3389), and it's working. The other is for 1433 port, to connect to the server. I can't connect through the SSH tunnel to the MS SQL Server, neither through telnet, or through GUI clients. Am I missing something? Additional details: on connect, I get this error from SQL Server Management Studio: TITLE: Connect to Server Cannot connect to localhost:14330. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 3) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=3&LinkId=20476 BUTTONS: OK The tunnel is configured like this: L14330 192.168.0.103:1433 192.168.0.103 is the permanent address of the SQL Server on the LAN. I also successfully forwarded TCP traffic of 3389 port to that IP, so tunneling is working to that IP address. When connecting without tunnel, through Microsoft SQL Server Management Studio, using the same method the connection establishes. Too bad my proxy doesn't allow 1433 port traffic, I wouldn't have this headache.

  Read the article

• What the best way to achieve RPO of zero and lowest possible RTO (less than 15 minutes) with SQL 2008 R2?

  - by Adrian Hope-Bailie

  We are running a payments (EFT transaction processing) application which is processing high volumes of transactions 24/7 and are currently investigating a better way of doing DB replication to our disaster recovery site. Our current and previous strategies have included using both DoubleTake and Redgate to replicate data to a warm stand-by. DoubleTake is the supported solution from the payments software vendor however their (DoubleTake's) support in South Africa is very poor. We had a few issues and simply couldn't ever resolve them so we had to give up on DoubleTake. We have been using Redgate to manually read the data from the primary site (via queries) and write to the DR site but this is: A bad solution Getting the software vendor hot and bothered whenever we have support issues as it has a tendency to interfere with the payment application which is very DB intensive. We recently upgraded the whole system to run on SQL 2008 R2 Enterprise which means we should probably be looking at using some of the built-in replication features. The server has 2 fairly large databases with a mixture of tables containing highly volatile transactional data and pretty static configuration data. Replication would be done over a WAN link to a separate physical site and needs to achieve the following objectives. RPO: Zero loss - This is transactional data with financial impact so we can't lose anything. RTO: Tending to zero - The business depends on our ability to process transactions every minute we are down we are losing money I have looked at a few of the other questions/answers but none meet our case exactly: SQL Server 2008 failover strategy - Log shipping or replication? How to achieve the following RTO & RPO with logshipping only using SQL Server? What is the best of two approaches to achieve DB Replication? My current thinking is that we should use mirroring but I am concerned that for RPO:0 we will need to do delayed commits and this could impact the performance of the primary DB which is not an option. Our current DR process is to: Stop incoming traffic to the primary site and allow all in-flight transaction to complete. Allow the replication to DR to complete. Change network routing to route to DR site. Start all applications and services on the secondary site (Ideally we can change this to a warmer stand-by whereby the applications are already running but not processing any transactions). In other words the DR database needs to, as quickly as possible, catch up with primary and be ready for processing as the new primary. We would then need to be able to reverse this when we are ready to switch back. Is there a better option than mirroring (should we be doing log-shipping too) and can anyone suggest other considerations that we should keep in mind?

  Read the article

• Rebasing a branch which is public

  - by Dror

  I'm failing to understand how to use git-rebase, and I consider the following example. Let's start a repository in ~/tmp/repo: $ git init Then add a file foo $ echo "hello world" > foo which is then added and committed: $ git add foo $ git commit -m "Added foo" Next, I started a remote repository. In ~/tmp/bare.git I ran $ git init --bare In order to link repo to bare.git I ran $ git remote add origin ../bare.git/ $ git push --set-upstream origin master Next, lets branch, add a file and set an upstream for the new branch b1: $ git checkout -b b1 $ echo "bar" > foo2 $ git add foo2 $ git commit -m "add foo2 in b1" $ git push --set-upstream origin b1 Now it is time to switch back to master and change something there: $ echo "change foo" > foo $ git commit -a -m "changed foo in master" $ git push At this point in master the file foo contain changed foo, while in b1 it is still hello world. Finally, I want to sync b1 with the progress made in master. $ git checkout b1 $ git fetch origin $ git rebase origin/master At this point git st returns: # On branch b1 # Your branch and 'origin/b1' have diverged, # and have 2 and 1 different commit each, respectively. # (use "git pull" to merge the remote branch into yours) # nothing to commit, working directory clean At this point the content of foo in the branch b1 is change foo as well. So what does this warning mean? I expected I should do a git push, git suggests to do git pull... According to this answer, this is more or less it, and in his comment @FrerichRaabe explicitly say that I don't need to do a pull. What's going on here? What is the danger, how should one proceed? How should the history be kept consistent? What is the interplay between the case described above and the following citation: Do not rebase commits that you have pushed to a public repository. taken from pro git book. I guess it is somehow related, and if not I would love to know why. What's the relation between the above scenario and the procedure I described in this post.

  Read the article

• When upgrading from Vista to Windows 7 on a DELL laptop, how do I know which drivers to reinstall an

  - by msorens

  According to Dell's upgrade page for Vista to Windows 7, after using the upgrade assistant the final step is to install drivers. They refer to this page for the order of driver installation, listing 9 items. From there I go to the Dell Drivers and Downloads page, enter my system tag, and get a list of the downloads available for my specific box. That page, by the way, has a link to driver install instructions that lists 10 rather than 9 items. Going to Drivers Help in the side panel and clicking on "In what order should drivers be installed?" shows yet a third list, this one containing 13 items. Not surprisingly, the order of these 3 lists of drivers are not quite the same for the common items! Furthermore, of the 26 files Dell's site recommends for my machine, there are several not shown on any of the 3 lists! I can make determinations for some of these: 6 of them are "applications" so I know which of those I want and that they could probably be safely installed after all drivers. BIOS: I would think this should be unaffected by an OS upgrade so could be skipped. Two tools in the diagnostics category: could probably be done after all drivers. That leaves just a CD/DVD driver and a webcam driver unaccounted for. So my two related questions are these: How critical is the driver installation order and which one do I follow? (Keep in mind this is for an upgrade, not a fresh install.) Where in the order do I insert the CD/DVD and the webcam drivers (if needed) ? Dell's driver download page provides (in theory) the list of all downloads relevant to my specific machine, via the service tag. But do I actually need to reinstall all of them? some? none? How does one determine this? They do label each with Recommended or Optional, so do I need to reinstall all the recommended ones? (Part of the reason for my perplexed frown is that I wonder why I would need to reinstall a CD/DVD driver since I would already be using the drive to install the OS!)

  Read the article

• Wirelss card not being detected in backtrack 5

  - by Jesse Nelson

  I just installed backtrack 5 and I am unable to detect my wireless card. iwconfig doesn't list my interface. I can see that the hardware is present in lspci -vnn (see below) but I can't get the interface detected. I have tried to reinstall the compat-wireless package but I get errors during the build (see below) I have done a ton of researching and I keep hitting a brick wall, mostly because the wiki for backtrack is down and I can't find any good resources. Does anyone know how to fix the issue? Also, does anyone no how I can scan the hardware to determine what NIC is assigning my interface? If I can figure out the interface name I think I can set it up manually by putting up the link and using wireless-tools to manually configure the connection, this is what I had to do in arch on my mac. As stated the wiki for backtrack is down and I can't find any help on the issue. I tried to do the full kernel upgrade suggested in my software update but after the update was complete and I logged back in I had a new log in manager and the only thing I was able to log into was window managers. However, after this update my wireless was working fine. Please help I am new to Linux and the wiki is down, I have nowhere else to turn. Forgot to mention I am using the KDE version, not Gnome. Thanks in advance for any help or support. Attempt at make: root@bt:/usr/src/compat-wireless-3.3-rc1-2# make /usr/src/compat-wireless-3.3-rc1-2/config.mk:254: "WARNING: CONFIG_CFG80211_WEXT will be deactivated or not working because kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools using wext interface like iwconfig will not work. To activate it build your kernel e.g. with CONFIG_LIBIPW=m." make -C /lib/modules/2.6.38/build M=/usr/src/compat-wireless-3.3-rc1-2 modules make: *** /lib/modules/2.6.38/build: No such file or directory. Stop. make: *** [modules] Error 2 lspci output: root@bt:/usr/src/compat-wireless-3.3-rc1-2# lspci -vnn -i net lspci: I/O error at net, line 0 root@bt:/usr/src/compat-wireless-3.3-rc1-2# lspci -vnn 02:00.0 Network controller [0280]: Atheros Communications Inc. Device [168c:0032] (rev ff) (prog-if ff) !!! Unknown header type 7f ( This is the problem but I can't find the solution) Kernel modules: ath9k iwconfig output: root@bt:/usr/src/compat-wireless-3.3-rc1-2# iwconfig lo no wireless extensions. eth0 no wireless extensions.

  Read the article

• configuring mod_proxy_html properly?

  - by tobinjim

  I have an apache2 web server that handles reverse proxy for Rails3 app running on another machine. The setup works except URLs generated within the webapp aren't getting rewritten by my configuration for mod_proxy_html. The ["Reverse Proxy Scenario"][1] is exactly what I'm trying to do, so I've followed the tutorial as completely as I know how. I've applied or tried answers supplied here on stackoverflow, to no effect. According to the "Reverse Proxy Scenario" you want a number of modules loaded. All those instructions are in my httpd.conf file and when I examine the output from apactectl -t -D DUMP_MODULES all the expected modules show in amongst the listing. My external web server doing the reverse proxy is at www.ourdomain.org and the Rails app is internally available at apphost.local (the server is Mac OS X Server 10.6, the rails app server is Mac OS X 10.6). What's working right now is access to the webapp via the reverse proxy as: http://www.ourdomain.org/apphost/railsappname/controllername/action But none of the javascript files, css files or other assets get loaded, and links internal to the web app come out missing the apphost portion of the URL, as if my rewrite rule is configured incorrectly (so of course I've focused on that and can't seem to get anything to be added or deleted in the process of passing the html in from the apphost and out through the Apache server). For instance, hovering over an action link in the html returned by the web app you'll get: http://www.ourdomain.org/railsappname/controllername/action Here's what my Apache directives look like: LoadModule proxy_html_module /usr/libexec/apache2/mod_proxy_html.so LoadModule xml2enc_module /usr/libexec/apache2/mod_xml2enc.so ProxyHTMLLogVerbose On LogLevel Debug ProxyPass /apphost/ http://apphost.local/ <Location /apphost/> SetOutputFilter INFLATE;proxy-html;DEFLATE ProxyPassReverse / ProxyHTMLExtended On ProxyHTMLURLMap railsappname/ apphost/railsappname/ RequestHeader unset Accept-Encoding </Location> After every change I make to httpd.conf I religiously check apachectl -t just to be sane. I'm definitely not an Apache expert, but all the directives that follow mine seem to not overrule what I'm doing here. But then nothing that I try seems to alter the URLs I see in my browser after hitting the Apache server with a request for my web app. Even if you can't tell what I've done incorrectly, I'd welcome ideas on how to get Apache to help see what it's working on and doing to the html coming from my web app. That's what I understood the ProxyHTMLLogVerbose On and LogLevel Debug to be setting up, but I'm not seeing anything in the log files.

  Read the article

• Is there a switch that will connect directly to my modem and allow my router to serve only as a WiFi connection?

  - by Abner

  Details . . Devices . Internets -50Mbps Cable Internet Modem - Motorola Surfboard Extreme Router - Netgear WNDR3700v3 Switch - D-Link DGS-1008G Wired Ethernet Cable - Cat6_24Awg_ Device Configuration - Modem\Router\Switch . . Internet Usage . Wired Demand XBOX 360 1 Gaming PC 2 PC - HD video . WiFi Demand 3 android + 1 Laptop for browsing and group video chat simultaneously . . Specifics . I am experiencing problems with network speeds and reliability on both wired and wireless connections. On many occasions I experience WiFi Speeds that vary between the 15mbps to 0.50 mbs (or less) and ping ranging from 15ms to 500ms. These results are from when I notice problems with internet lag and run speedtest.net to get details of problems. I have a stretched out floor-plan and old building materials drastically affecting my cellphone signal strength as well). After Reading the "Known Issues" Section on the webpage below http://www.dd-wrt.com/wiki/index.php/Netgear_WNDR3700#Known_Issues I bought the switch and Cat6 cable to increase speed and relieve stress on router in an attempt to fix the symptoms. I thought I'd use the router in a Modem\Switch\Router configuration. I thought I'd only have to use the router for mobile WiFi connections like android or Laptops when necessary (hopefully eliminating the problem caused by the router when subjected to all those demanding Ethernet connections) When I started unboxing the switch, I noticed the manual of this DGS-1008G shows it being connected in the Modem\Router\Switch order and not in the Modem\Switch\Router configuration I was aiming for. I have not been able to find a solid plan to remedy my specific problem without buying another expensive router. I would like to get the speeds I am paying for without buying another router. (My WiFi Adapters would also need to be updated if new router is required, meaning more $$$). I can always sell the switch and get a better one that will bypass the router because my most demanding internet connections are Wired. . . Questions Can I accomplish a Modem\Switch\Router configuration with current switch? Is there a different way to get the wired speed I need while providing WiFi only when necessary? . .

  Read the article

• Getting error while installing mod_wsgi in centos

  - by user825904

  I have reinstalled python with enable shared [root@master mod_wsgi-3.4]# make clean rm -rf .libs rm -f mod_wsgi.o mod_wsgi.la mod_wsgi.lo mod_wsgi.slo mod_wsgi.loT rm -f config.log config.status rm -rf autom4te.cache [root@master mod_wsgi-3.4]# LD_RUN_PATH=/usr/local/lib make apxs -c -I/usr/local/include/python2.7 -DNDEBUG mod_wsgi.c -L/usr/local/lib -L/usr/local/lib/python2.7/config -lpython2.7 -lpthread -ldl -lutil -lm /usr/lib64/apr-1/build/libtool --silent --mode=compile gcc -prefer-pic -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -Wformat-security -fno-strict-aliasing -DLINUX=2 -D_REENTRANT -D_GNU_SOURCE -pthread -I/usr/include/httpd -I/usr/include/apr-1 -I/usr/include/apr-1 -I/usr/local/include/python2.7 -DNDEBUG -c -o mod_wsgi.lo mod_wsgi.c && touch mod_wsgi.slo In file included from /usr/local/include/python2.7/Python.h:8, from mod_wsgi.c:142: /usr/local/include/python2.7/pyconfig.h:1161:1: warning: "_POSIX_C_SOURCE" redefined In file included from /usr/include/sys/types.h:26, from /usr/include/apr-1/apr-x86_64.h:127, from /usr/include/apr-1/apr.h:19, from /usr/include/httpd/ap_config.h:25, from /usr/include/httpd/httpd.h:43, from mod_wsgi.c:34: /usr/include/features.h:162:1: warning: this is the location of the previous definition In file included from /usr/local/include/python2.7/Python.h:8, from mod_wsgi.c:142: /usr/local/include/python2.7/pyconfig.h:1183:1: warning: "_XOPEN_SOURCE" redefined In file included from /usr/include/sys/types.h:26, from /usr/include/apr-1/apr-x86_64.h:127, from /usr/include/apr-1/apr.h:19, from /usr/include/httpd/ap_config.h:25, from /usr/include/httpd/httpd.h:43, from mod_wsgi.c:34: /usr/include/features.h:164:1: warning: this is the location of the previous definition mod_wsgi.c: In function ‘wsgi_server_group’: mod_wsgi.c:991: warning: unused variable ‘value’ mod_wsgi.c: In function ‘Log_isatty’: mod_wsgi.c:1665: warning: unused variable ‘result’ mod_wsgi.c: In function ‘Log_writelines’: mod_wsgi.c:1802: warning: unused variable ‘msg’ mod_wsgi.c: In function ‘Adapter_output’: mod_wsgi.c:3087: warning: unused variable ‘n’ mod_wsgi.c: In function ‘Adapter_file_wrapper’: mod_wsgi.c:4138: warning: unused variable ‘result’ mod_wsgi.c: In function ‘wsgi_python_term’: mod_wsgi.c:5850: warning: unused variable ‘tstate’ mod_wsgi.c:5849: warning: unused variable ‘interp’ mod_wsgi.c: In function ‘wsgi_python_child_init’: mod_wsgi.c:7050: warning: unused variable ‘l’ mod_wsgi.c:6948: warning: unused variable ‘interp’ mod_wsgi.c: In function ‘wsgi_add_import_script’: mod_wsgi.c:7701: warning: unused variable ‘error’ mod_wsgi.c: In function ‘wsgi_add_handler_script’: mod_wsgi.c:8179: warning: unused variable ‘dconfig’ mod_wsgi.c:8178: warning: unused variable ‘sconfig’ mod_wsgi.c: In function ‘wsgi_hook_handler’: mod_wsgi.c:9375: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9377: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9379: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9383: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9403: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9405: warning: suggest parentheses around assignment used as truth value mod_wsgi.c:9408: warning: suggest parentheses around assignment used as truth value mod_wsgi.c: In function ‘wsgi_daemon_worker’: mod_wsgi.c:10819: warning: unused variable ‘duration’ mod_wsgi.c:10818: warning: unused variable ‘start’ mod_wsgi.c: In function ‘wsgi_hook_daemon_handler’: mod_wsgi.c:13172: warning: unused variable ‘i’ mod_wsgi.c:13170: warning: unused variable ‘elts’ mod_wsgi.c:13169: warning: unused variable ‘head’ mod_wsgi.c: At top level: mod_wsgi.c:8142: warning: ‘wsgi_set_user_authoritative’ defined but not used mod_wsgi.c:15251: warning: ‘wsgi_hook_check_user_id’ defined but not used /usr/lib64/apr-1/build/libtool --silent --mode=link gcc -o mod_wsgi.la -rpath /usr/lib64/httpd/modules -module -avoid-version mod_wsgi.lo -L/usr/local/lib -L/usr/local/lib/python2.7/config -lpython2.7 -lpthread -ldl -lutil -lm

  Read the article

• how to setup kismet.conf on Ubuntu

  - by Registered User

  I installed Kismet on my Ubuntu 10.04 machine as apt-get install kismet every thing seems to work fine. but when I launch it I see following error kismet Launching kismet_server: //usr/bin/kismet_server Suid priv-dropping disabled. This may not be secure. No specific sources given to be enabled, all will be enabled. Non-RFMon VAPs will be destroyed on multi-vap interfaces (ie, madwifi-ng) Enabling channel hopping. Enabling channel splitting. NOTICE: Disabling channel hopping, no enabled sources are able to change channel. Source 0 (addme): Opening none source interface none... FATAL: Please configure at least one packet source. Kismet will not function if no packet sources are defined in kismet.conf or on the command line. Please read the README for more information about configuring Kismet. Kismet exiting. Done. I followed this guide http://www.ubuntugeek.com/kismet-an-802-11-wireless-network-detector-sniffer-and-intrusion-detection-system.html#more-1776 how ever in kismet.conf I am not clear with following line source=none,none,addme as to what should I change this to. lspci -vnn shows 0c:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01) Subsystem: Dell Device [1028:000c] Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f69fc000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information <?> Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [13c] Virtual Channel <?> Capabilities: [160] Device Serial Number Capabilities: [16c] Power Budgeting <?> Kernel driver in use: wl Kernel modules: wl, ssb and iwconfig shows lo no wireless extensions. eth0 no wireless extensions. eth1 IEEE 802.11bg ESSID:"WIKUCD" Mode:Managed Frequency:2.462 GHz Access Point: <00:43:92:21:H5:09> Bit Rate=11 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Managementmode:All packets received Link Quality=1/5 Signal level=-81 dBm Noise level=-90 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:169 Invalid misc:0 Missed beacon:0 So what should I be putting in place of source=none,none,addme with output I mentioned above ?

  Read the article

• Windows 7 & Virtual PC and Internet (gateway) problems on host PC

  - by Mufasa

  I upgraded to Windows 7 on a PC that is a few years old. The CPU was one revision away from having Hyper-V on it. So, I had to install Microsoft Virtual PC 2007 (v6.0.156.0) to run full XP instances instead of the seamless XP virtualization that is advertised so much. That's fine though; the 'older' version is useful since I use it to run different versions of the whole XP/IE stack for testing. (I'm a web developer.) ...And for the one 16-bit application we still use at the office for scheduling. * sigh * The virtual instances work fine, including networking. My issue is that after a reboot or coming out of sleep mode, my host Windows 7 won't connect to the Internet. It will connect to the local network fine. If I disable the "Virtual Machine Network Services" item (I'll call "VMNS" from here on) in the LAN Connection properties box, it starts working. But than the Virtual PC instances lose their network connectivity. If I re-enable VMNS again in the same instance, everything works (Internet on host and in the virtualized instances). But after the next reboot/sleep cycle this starts over. The route table gave me a clue though. When doing a cycle w/ VMNS enabled: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 On-link 10.0.3.51 20 0.0.0.0 0.0.0.0 10.0.10.10 10.0.3.51 276 ... After VMNS is disabled, the first route goes away. I assume that is for VMNS to intercept virtualized instance's network connections and forward them correctly? Just a guess though. More info: I checked my Firewall settings and Services (because I'm sort of a control nazi and turn off a lot) but couldn't find anything that made sense and if turned on changed anything. So it might be something there I'm missing, but I don't know what. My current hacked solution: So, I figured I'd mess with the routes myself to see if that helped, it did. If I run a route delete 0.0.0.0 on the universal (0.0.0.0) gateway routes, and add back in just the 2nd line with route add 0.0.0.0 mask 0.0.0.0 10.0.10.10--the one that points to my actual gateway (10.0.10.10)--then I don't have to mess with the disable/enable cycle of VMNS, and everything works. Running those two commands is faster then bringing up connection options and disabling and re-enabling VMNS, but I still don't want to have use that hack script every boot either. (Oh, and I also tried messing with hard-coding TCP/IP settings in my network adapter, including setting high metrics, etc., but that didn't help either.) Any suggestions on the right way to fix this?

  Read the article

• Frequent and weird wifi disconnections

  - by Sidou

  How would you explain, troubleshoot (and solve) the following problem? Wifi ADSL modem router D-link 2640R installed in living room at about 1.8m height. Working fine, synchronising and getting/serving stable internet connection. First situation: -Laptop 01 in other end of the house, let's say in room01 southern to the living room, distant by about 15m. Getting stable signal of good to very good quality. No disconnection. -Laptop 02 in room02 opposite to room01 (5m West) which makes it almost at the same distance and direction from the router located 15m North. Getting stable signal of good to very good quality. No disconnection. Second situation: -Laptop 01 moved to room03 Northern to the living room (actually just 3m behind the wall where the router lies). Getting stable signal of excellent quality. No disconnection. -Laptop 02 still in room02 but now experiences frequent disconnections (actually almost impossible to get the Internet even though the signal level is still very good. Either no Internet with the wifi icon appearing connected to access point or no connection established at all which happens every 2 minutes and that means virtually no Internet at all as I can just get a timeframe of 1 minute or so to load any website or even get to the router's web based control panel. If Laptop 01 is completely shut down or its wifi adapters shut down or even still working but its wifi MAC address forbidden, then Laptop 02 has no problem at all. If Laptop 02 is moved to a nearer location to the router, in the living room for instance, then no connection problem occurs even if Laptop 01 is also connected. And also if we move back Laptop 01 to its original location (room 01), then no problem as well. I'm completely lost and don't know how to address this issue. I tried to change the Wifi channel and even tried the auto channel scan but that didn't solve it. I know that the problem is probably coming from Laptop 01 being in its new location or some sort of interference as the problem occurs only under the described condition but I have no idea how to solve it! I also scanned the neighborhood for wifi jam using InSSIDer, there are few other access points but they don't seem to affect the situation. Any ideas about the steps to follow or tools to use ?

  Read the article

• How to format and where to put the SPF TXT record?

  - by YellowSquirrel

  EDIT I think I more or less understand the syntax and, anyway, Google is giving, in the link below, the syntax needed. My question is really where to put that stuff. Should I quote every field? The whole line? :) I've set up Google apps for my domain: I've registered the domain with Google by adding the CNAME Google asked and I've apparently succesfully setup the MX Google mail servers. So far I haven't yet a dedicated server: I'm just having a domain at a registrar. Now I want to activate SPF and I'm confused. In the following short webpage: http://www.google.com/support/a/bin/answer.py?answer=178723 it is written that I must add a TXT record containing: v=spf1 include:_spf.google.com ~all Where should I enter this? Should this go in the zone (?) file, like I did for the CNAME and the MX records? So far I have something like this: @ 10800 IN A 217.42.42.42 @ 10800 IN MX 5 ASPMX3.GOOGLEMAIL.COM. @ 10800 IN MX 5 ASPMX2.GOOGLEMAIL.COM. @ 10800 IN MX 3 ALT2.ASPMX.L.GOOGLE.COM. @ 10800 IN MX 3 ALT1.ASPMX.L.GOOGLE.COM. @ 10800 IN MX 1 ASPMX.L.GOOGLE.COM. google8a70835987f31e34 10800 IN CNAME google.com. Does adding the SPF TXT record mean I should literally have something like that: @ 10800 IN A 217.42.42.42 @ 10800 IN MX 5 ASPMX3.GOOGLEMAIL.COM. @ 10800 IN MX 5 ASPMX2.GOOGLEMAIL.COM. @ 3600 IN TXT "v=spf1 include:_spf.google.com ~all" @ 10800 IN MX 3 ALT2.ASPMX.L.GOOGLE.COM. @ 10800 IN MX 3 ALT1.ASPMX.L.GOOGLE.COM. @ 10800 IN MX 1 ASPMX.L.GOOGLE.COM. google8a70835987f31e34 10800 IN CNAME google.com. I made that one up and included right in the middle to show how confused I am. What I'd like to know is the exact syntax and where/how I should put this TXT record.

  Read the article

• tc rules block traffic from some hosts at network

  - by user139430

  I have a problem I can not solve. The script, which sets the rules for traffic shaping is blocking the traffic from some hosts.If I remove all the rules, then it works. I can not understand why? Here is my script... #!/bin/sh cmdTC=/sbin/tc rateLANDl="60mbit" ceilLANDl="60mbit" rateLANUl="40mbit" ceilLANUl="40mbit" quantLAN="1514" # Nowaday bandwidth limit set to 100mbit. # We devide it with 60mbit download and 40mbit upload bandthes. rateHiDl="30mbit" ceilHiDl="60mbit" rateHiUl="20mbit" ceilHiUl="40mbit" quantHi="1514" rateLoDl="30mbit" ceilLoDl="60mbit" rateLoUl="20mbit" ceilLoUl="40mbit" quantLo="1514" devNIF=eth0 devFIF=ifb0 modprobe ifb ip link set $devFIF up 2>/dev/null #exit 0 ################################################################################################ # Remove discuiplines from network and fake interfaces ################################################################################################ $cmdTC qdisc del dev $devNIF root 2>/dev/null $cmdTC qdisc del dev $devFIF root 2>/dev/null $cmdTC qdisc del dev $devNIF ingress 2>/dev/null if [ "$1" = "down" ]; then exit 0 fi ################################################################################################ # Create discuiplines for network interface ################################################################################################ $cmdTC qdisc add dev $devNIF root handle 1:0 htb default 12 # Create classes for network interface $cmdTC class add dev $devNIF parent 1:0 classid 1:1 htb rate ${rateLANDl} ceil ${ceilLANDl} quantum ${quantLAN} $cmdTC class add dev $devNIF parent 1:1 classid 1:11 htb rate ${rateHiDl} ceil ${ceilHiDl} quantum ${quantHi} $cmdTC class add dev $devNIF parent 1:1 classid 1:12 htb rate ${rateLoDl} ceil ${ceilLoDl} quantum ${quantLo} $cmdTC qdisc add dev $devNIF parent 1:11 handle 111: sfq perturb 10 $cmdTC qdisc add dev $devNIF parent 1:12 handle 112: sfq perturb 10 # Create filters for network interface $cmdTC filter add dev $devNIF protocol all parent 1:0 u32 match ip dst 10.252.2.0/24 flowid 1:11 $cmdTC filter add dev $devNIF protocol all parent 111: handle 111 flow hash keys dst divisor 1024 baseclass 1:11 $cmdTC filter add dev $devNIF protocol all parent 112: handle 112 flow hash keys dst divisor 1024 baseclass 1:12 ################################################################################################ # Create discuiplines for fake interface ################################################################################################ $cmdTC qdisc add dev $devFIF root handle 1:0 htb default 12 # Create classes for network interface $cmdTC class add dev $devFIF parent 1:0 classid 1:1 htb rate ${rateLANUl} ceil ${ceilLANUl} quantum ${quantLAN} $cmdTC class add dev $devFIF parent 1:1 classid 1:11 htb rate ${rateHiUl} ceil ${ceilHiUl} quantum ${quantHi} $cmdTC class add dev $devFIF parent 1:1 classid 1:12 htb rate ${rateLoUl} ceil ${ceilLoUl} quantum ${quantLo} $cmdTC qdisc add dev $devFIF parent 1:11 handle 111: sfq perturb 10 $cmdTC qdisc add dev $devFIF parent 1:12 handle 112: sfq perturb 10 # Create filters for network interface $cmdTC filter add dev $devFIF protocol all parent 1:0 u32 match ip src 10.252.2.0/24 flowid 1:11 $cmdTC filter add dev $devFIF protocol all parent 111: handle 111 flow hash keys src divisor 1024 baseclass 1:11 $cmdTC filter add dev $devFIF protocol all parent 112: handle 112 flow hash keys src divisor 1024 baseclass 1:12 ################################################################################################ # Create redirect discuiplines from network to fake interface ################################################################################################ $cmdTC qdisc add dev $devNIF handle ffff:0 ingress $cmdTC filter add dev $devNIF parent ffff:0 protocol all u32 match u32 0 0 action mirred egress redirect dev $devFIF Here is my /etc/modules: loop ifb ppp_mppe nf_conntrack_pptp nt_conntrack_proto_gre nf_nat_pptp nf_nat_proto_gre The system is Linux wall 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 GNU/Linux

  Read the article

• Fix single entry from mbr

  - by Sander

  I use EasyBCD to manage my tripleboot of (1) Windows Server 2008 R2, (2) Windows 7 Professional and (3) Ubuntu Linux. While trying to change the order of my boot menu I ended up losing the Windows Server entry. Luckily I had a boot menu backup (.bcd file) that allowed me to restore my boot menu using EasyBCD. However, when I now select the Windows Server option in my boot menu the Windows Server Recovery Environment starts up. So I have to select language/keyboard layout/etc. and then I have 3 options as shown in the image below. . My goal is to fix the one corrupted Windows Server entry from my boot menu without messing up or losing the two other ones. I'm guessing the Recovery Console (Command Prompt) is the next step and that I will be needing bootrec.exe. But when consulting this page: Use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair startup issues in Windows (about half way down there's a link that shows the bootrec.exe options) I'm getting uncertain. The page lists 4 options for bootrec.exe : /FixMbr /FixBoot /ScanOs /RebuildBcd What option do I need to fix just the server entry of my boot menu? Thanks in advance, Sander P.S. All three OS's are on the same physical disk (3 different partitions). Disk layout: System reserved (primary partition, 100 MB) Windows 7 (primary parition, 150 GB) Windows Server 2008 (primary partition, 150 GB) Extended partition (linux partitions (/,/swap,/home), 150GB + data partition, 150 GB) P.P.S. This is what my boot menu looks like using EasyBCD (Detailed/Debug mode) on my Windows 7 installation. Windows Boot Manager -------------------- identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795} device partition=\Device\HarddiskVolume1 description Windows Boot Manager locale en-US inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e} default {93f90e43-cae8-11df-b05a-c9177e705936} resumeobject {93f90e3e-cae8-11df-b05a-c9177e705936} displayorder {93f90e43-cae8-11df-b05a-c9177e705936} {93f90e3f-cae8-11df-b05a-c9177e705936} {93f90e46-cae8-11df-b05a-c9177e705936} toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d} timeout 10 displaybootmenu Yes Windows Boot Loader ------------------- identifier {93f90e43-cae8-11df-b05a-c9177e705936} device partition=\Device\HarddiskVolume3 path \Windows\system32\winload.exe description Windows Server 2008 R2 - Standard locale en-US inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7} recoverysequence {93f90e44-cae8-11df-b05a-c9177e705936} recoveryenabled Yes osdevice partition=\Device\HarddiskVolume3 systemroot \Windows resumeobject {93f90e42-cae8-11df-b05a-c9177e705936} nx OptOut Windows Boot Loader ------------------- identifier {93f90e3f-cae8-11df-b05a-c9177e705936} device partition=C: path \Windows\system32\winload.exe description Windows 7 - Professional locale nl-NL inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7} recoverysequence {93f90e40-cae8-11df-b05a-c9177e705936} recoveryenabled Yes osdevice partition=C: systemroot \Windows resumeobject {93f90e3e-cae8-11df-b05a-c9177e705936} nx OptIn Real-mode Boot Sector --------------------- identifier {93f90e46-cae8-11df-b05a-c9177e705936} device partition=C: path \NST\AutoNeoGrub0.mbr description Ubuntu 10.04 - Lucid Lynx

  Read the article

• Does 64bit Windows 8 have the same 75% memory-usage limitation for applications as Windows 7?

  - by Barleyman

  64bit Windows 7 (and Windows Vista) have a built-in limit of not being able to use the last 25% of RAM. You will get a low memory warning when you get close to the limit. Even if you disable that warning, applications will run out of memory and crash since the OS will refuse to allocate memory from that last 25%. That was fine when Vista was designed, when machines had 1 GB of total memory, but is pretty daft for today's 8 GB machines. Yes, the system will run cache, etc. on that extra 2 GB, but running out of memory when you have "merely" 2 GB left.... NB: this has nothing to do with the page file. If you limit the page file to a sensible size like 2 GB, you will still see this behavior. The system will cram the page file to the last byte while refusing to touch that 1/4th of the RAM. Does Windows 8 change this behavior? Is there now some fixed minimum free RAM requirement, like 512 MB, or is it still 25%? Can you actually adjust the low memory limit? EDIT: Here is another older post here which discusses this same behavior on Windows 7. There is fixed 25% limit in Windows 7 and I'd like to know if it's still in Windows 8. Windows 7 / Page File Disabled / 12 GB RAM / 2+ GB RAM free and "your computer is running low on memory" Edit2: Here is another link discussing the low memory warning and how to disable it. Note he claims the limit for RAM usage is 80%, not 75%. It would seem to be correct as you can in fact allocate 6.4GB of RAM with 8GB machine. Anything above and beyond that goes to the pagefile, though. http://halflight.com.au/2011/04/06/how-to-disable-low-memory-warnings-and-the-advantages-of-removing-the-page-file/ Edit3: a Here's couple of process explorer screenshots that demonstrate how it goes down. Exhibit1: https://dl.dropbox.com/u/42068601/sysinfo.jpg Exhibit2: https://dl.dropbox.com/u/42068601/sysint2.jpg You can see that Windows 7 will use the memory 6.4GB as the very last resort. I have low memory warning switched off here so programs crashed at the last screenshot allocation. With low memory warning turned on, it starts nagging before you can push OS to use that remaining 1.6GB. The question is not "Is it OK windows does not want to allocate last 20% of RAM because X", it's "Does Windows 8 still behave this way". With 16GB this really becomes dumb.

  Read the article

• MS DPM 2007: Testing the Recovery for a Production Domain

  - by NewToDPM

  Hi everybody! MS DPM 2007 is a new technology in my company, and so am I to the product. We have a classic Microsoft domain with two DCs, Exchange 2007 and a couple Web/MS SQL servers. I have deployed DPM one month ago on the domain, and after fixing the various issues I got with the replicas inconsistence and adapting the schedule and retention range to the server storage pool size, I can say the backup system is working correctly (no errors) as of today. However, there is one problem: we did not attempt to restore from the backups yet, which is a big no-no of course. I'm not sure about the way I should handle this, my main concern being Exchange and the System State of the DCs. From my understanding, DPM can only protect AND restore data on a server which is part of the same domain as the backup server. If I restore the System State (containing Active Directory) and the Exchange Storage Groups on a testing server, I am afraid it would completely disturb the domain functioning (for example, having two primary DCs on the domain). I am thinking about building a second DPM server on a testing separate domain which would mirror the replicas and then restore it on testing servers from this new domain. Is it the right way to handle the data recovery testing? How did you do on your domain when you first deployed DPM? I'd be grateful for any link/documentation or advice. Thank you in advance for your help! EDIT: Two options seem possible so far: i. Create another DC/Exchange server in the alternate location; ii. Create a separate domain in the alternate location and setup a trust between this domain and the production one. The option i is certainly the best but implies setting up a secondary Exchange server, with a dedicated public IP address so that if Exchange #1 dies, we can still send emails with Exchange #2. I don't know how complex this can be and would need to discuss it with my colleagues. The option ii would only fit the testing purposes. My only question regarding this is: if my production and DPM servers are part of domain A, and there is a trust between domains A and B, can I restore a domain A content to any domain B server?

  Read the article

• How to make Windows 7 use the internet connection that I specify

  - by user138957

  I have a LAN adapter and a USB wireless internet connection. When both connected windows 7 always uses the USB. I tried changing the metric values but no luck. Let me explains the steps I took. Currently automatic metric on all adapters. LAN connected. ipconfig shows that it is connected to the correct ip/dns/gateway etc. IPv4 Route table shows Metric 24 Then connected USB. ipconfig shows USB connectivity then LAN in that order. Internet is now through USB. IPv4 Route table shows Metric 4249 for LAN and USB is 41. Gateway for USB shows "on-link". netstat -rn shows USBDEVICE on top. Changed LAN metric to 5 and now the route table shows LAN as 9 (not sure why it added 4) and USB as 41. netstat shows LAN then USB. ipconfig shows LAN then USB. But still connection is through USB. How do I know? Task manager shows utilization only through USB as well as speed is showing around 1mbps rather than LANs 10mbps. How can I get win7 use LAN while USB is connected. I am just trying to use USB as a backup just in case I lose LAN connection. Please help!! I thought i will make USB metric manually to say 10. But it says I have to reconnect for it to be effective. Currently USB still shows below LAN and still has 9 and 41 in the table. Disconnected USB. Table shows LAN metric as 24 (Not sure why it got changed from 9 and setting got reverted by to automatic) Reconnected USB. Now in the setting still shows 10 and the route table shows 11 for USB and LAN shows 4249 (settings shows 4245, 4 less)) For some reason restarting USB is resetting LAN setting when reconnected. Thanks

  Read the article

• Wifi randomly drops on Windows 8 laptop

  - by JosiahS

  First of all, I did a lot of research on this problem, and I wasn't able to come to any helpful conclusion. I've finally decided that I need advice from those who might know where to look. So don't let me down. :P I used to have an older Windows 7 laptop, which worked great for basic office and web browsing. However, I wanted something that would play actual modern games. So I recently bought a Sager NP8235 with the Intel Wireless-AC 7260 wifi card, and installed Windows 8 Pro on it. And ever since, I've been having problems with the wifi. Generally, what happens is if I leave the laptop on but inactive for an extended amount of time (I've estimated it around an hour to two), the wifi will start dropping randomly. If I happened to have a download going at the time, it usually causes the download to fail. Or, if I put the laptop to sleep overnight, the next morning I usually have to restart the computer because the wifi device apparently stops working (it literally won't turn on). Also, and most frustrating, whenever I'm on a video chat (like Skype), after about ten minutes, the connection will start lagging like crazy, until it forces Skype to end the call. After that, I usually have to disable and reenable the wifi to get it working again. I know it isn't our internet, because all the other computers in our house (~8) don't have any issues. Even the old Windows 7 laptop (connected also over wifi) works just fine, scoring the normal ~3Mbps average on speedtest.net (yes, I know our internet is slow, we live out in the country). Additionally, when I connect the Sager directly to the router via ethernet, the internet instantly starts working just great. Like I said, I've done a lot of googling to figure out what's going on, and I haven't been able to find anything that worked for me. Is it Windows 8 conflicting with the Wifi drivers? As of this writing, I have the Intel drivers v16.1.5.2 installed (without the extra Intel software). Or is it our router? It's a TP-Link TL-WR841ND, set to the default settings. The Sager is currently being assigned to a static IP, if that makes any difference. And yet, the old windows 7 laptop has a much more stable connection than the Sager. Anyone have any ideas? At this point, I'd appreciate even knowing what the problem is.

  Read the article

• Can not get sound over hdmi in kubuntu 9.10

  - by user32509

  I have used a hdmi cable to connect my lcd (which is connected with my speakers) with my nvida 275 gtx grafic card. I can not get the sound output to work. The hardware itself is working probably - I tested it under windows. Currently I am running Kubuntu 9.10 64 with Nvidia 190.53. The sound output worked fine before I installed the hdmi connection. (German output - i can change it, if you tell me how :)) aplay -l **** Liste von PLAYBACK Geräten **** Karte 0: Intel [HDA Intel], Gerät 0: ALC889A Analog [ALC889A Analog] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 Karte 0: Intel [HDA Intel], Gerät 1: ALC889A Digital [ALC889A Digital] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 aplay -L front:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog Front speakers surround40:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Intel,DEV=0 HDA Intel, ALC889A Digital IEC958 (S/PDIF) Digital Audio Output null Discard all samples (playback) or generate zero samples (capture) pulse Playback/recording through the PulseAudio sound server And i disabled mute in kmix an all channels :) Edit: lspci -v ... 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) Subsystem: Giga-byte Technology Device a022 Flags: bus master, fast devsel, latency 0, IRQ 22 Memory at ea400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel <?> Capabilities: [130] Root Complex Link <?> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel ... cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.20. lsmod | grep snd_hda_intel snd_hda_intel 31880 2 snd_hda_codec 87584 2 snd_hda_codec_realtek,snd_hda_intel snd_pcm 93160 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd 77096 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device snd_page_alloc 10928 2 snd_hda_intel,snd_pcm I think I am missing the something-hdmi module? Is there such a thing?

  Read the article

• Recovering from backup without original install media

  - by KGendron

  A machine from my old job had a complete hard drive failure. I have backups but I'm running into severe problems restoring from them. The only install media was a secondary restore partition on the system's hard drive. I hate whoever came up with that idea more than i can possibly express with words. I spent several days trying to recover the disk - it is pretty well shot and none of my best tricks could even get it to show up in the bios/ The machine that broke is an hp with xp media center edition on it (I don't know why either). The backups were created using the default windows backup tool - I have .bfk file on an external hardrive that i am trying to restore from. I've replaced the hard drive. My home machine is running windows 7 64bit and i'm trying to use it as a platform to restore to the other disk. I downloaded the window 7 nt-restore utility, however no matter what i do it restores to my C drive rather than the specified drive. Fortunately win7 security settings prevented it from being a complete disaster - but still not a happy thing. I tried firing up the xp virtual machine. I can browse to the backups but it says they are invalid and refuse to let me view/ continue with the restore. I tried installing XP to an extra harddrive on my machine - however it bluescreens on me during the install process and I cry. I tried installing xp pro to the new drive and attempted to restore over it, it of course blackscreened on me as that was a stupid idea. I made two partitions on the new hard drive (Apparently the bios on this accursed piece of junk doesn't allow hd partitions larger than 200G anyways and thus fails 40 minutes into the install with an ever-descriptive "Disk Read Error". Guess how i spent last weekend? My last idea was to install xp pro to the second partition and then use it to restore from backup to the first. After the first restart it gives me the error "Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware". My brain made one of those bad hard drive clicky noises. I've tried several boot disks but they don't seem to work. If anyone has a link to a good one it would be greatly appreciated. Anyone have any more ideas? - I really hate asking on what seems like such a simple issue but i am quite literally at my wit's end. Thanks - and sorry for the really long post.

  Read the article

• turn off disable the performance cache

  - by jessie

  OK I run a streaming website and my CMS is giving me an error when uploading videos "Failed To Find Flength File" ok so I did some research. The answer I got from the coder was below. I did do all that, but the only thing I could not do is turn off what he refers to as performance cache, talked about in the last sentence... I am on a Cent OS Assuming the script is set up properly, you are probably dealing with some kind of write-caching. Some servers perform write-caching which prevents writing out the flength file or the entire CGITemp file during the upload. The flength file or the CGITemp file do not actually hit the disk until the upload is complete, making it worthless for reporting on progress during the upload. This may be fixed using a .htaccess file assuming your host supports them. Here is a link to an excellent tutorial on using .htaccess files. I strongly recommend giving it a quick read before attempting to install your own .htaccess file. 1. A mod_security module for Apache. To fix it just create a file called .htaccess (that's a period followed by "htaccess") and put the following lines in that file. Upload the file into the directory where the Uber-Uploader CGI ".pl" scripts resides, or in some directory above it (like your server's DOCUMENT_ROOT, i.e. the top-level of your webspace). htaccess files must be uploaded as ASCII mode, not BINARY. You may need to CHMOD the htaccess file to 644 or (RW-R--R--). # Turn off mod_security filtering. SecFilterEngine Off # The below probably isn't needed, # but better safe than sorry. SecFilterScanPOST Off If the above method does not work, try putting the following lines into the file SetEnvIfNoCase Content-Type \ "^multipart/form-data;" "MODSEC_NOPOSTBUFFERING=Do not buffer file uploads" mod_gzip_on No 2. "Performance Cache" enabled on OS X SERVER. If you're running OS X Server and the progress bar isn't working, it could be because of "performance caching." Apparently if ANY of your hosted sites are using performance caching, then by default, all sites (domains) will attempt to. The fix then is to disable the performance cache on all hosted sites.

  Read the article

• Laptops on Windows Domain sometimes have problems accessing internet when off-site

  - by FSUScoot

  Hi all-- We've had this problem for a long time. When users travel, sometimes they can't get internet access from a wired or wireless connection. Here are a couple examples: 1) A user goes to a hotel and tries to access the wireless in their room. They can connect to the access point. They open a web browser and they can't get re-directed to the hotel's login page. Because they can't log in, there's no internet access. 2) A user goes to another laboratory/university and tries to access the wired network. They connect, link is fine, PC gets IP from DHCP but no internet access. There's no login page to be re-directed to. It should just "work". What I've found is that it's a DNS issue. Because the computer is on a Windows Domain, it seems it MUST use our DNS servers. Even if you connect to an outside network and do an ipconfig /all, it looks like everything is ok. It'll even show their DNS servers listed in the config. The computer just won't use the other network's DNS server. I found a reg key that keeps our DNS servers listed and it seems that they take priority every time: HKLM\SOFTWARE\Policies\Microsoft\Windows NT\DNSClient All the values under that key are for our AD domain. NameServer and Searchlist never change. What I've found is if the user edits the NameServer string and puts the DNS server of the network they're on, everything works just fine. They get re-directed to the hotel's correct login page or their internet access starts working. It's only a problem if the network they're on blocks outside DNS or a hotel that uses an internal name in their front page redirection that only their DNS server knows about, i.e., not public. If the re-direct page starts with an IP, like 10.10.10.10, it'll work just fine. Obviously this isn't a fix for everyone. Most of my users are pretty knowledgeable so it’s easy for me to walk them through or send them a .reg file that they can edit and run. This problem isn't limited to Windows 7. It was like this with XP as well. It's not hardware related. The problem exists on both wired and wireless, Intel or Broadcom, laptops or desktops. Anyone else have this problem? Is there a GPO I can change that I missed? Got a good work-around for this? Thanks for any help!

  Read the article

• A name was started with an invalid character. Error processing resource

  - by Gallen

  Here is the exact error I'm getting when I try to launch my default.aspx file from the published folder. Can anybody point me in the right direction? The XML page cannot be displayed Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later. -------------------------------------------------------------------------------- A name was started with an invalid character. Error processing resource 'file:///C:/inetpub/wwwroot/MHNProServices/Default.... <%@ Page Title="" Language="C#" MasterPageFile="~/ProServices.Master" AutoEventWireup="true" CodeBehind="Default.aspx.cs"... Here are the contents of default.aspx <%@ Page Title="" Language="C#" MasterPageFile="~/ProServices.Master" AutoEventWireup="False" CodeBehind="Default.aspx.cs" Inherits="MHNProServices.Default" %> <asp:Content ID="Content1" ContentPlaceHolderID="head" runat="server"> <link type="text/css" href="css/Default.css" rel="Stylesheet" /> </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="ContentPlaceHolder1" runat="server"> <div id="contentHead"> <img src="css/img/heading_landing.jpg" /> </div> <div id="contentTop"></div> <div id="content"> <div id="contentLeft"> <asp:Image ID="displayPicture" runat="server" /> <img id="displayOverlay"src="css/img/profilepicture_overlay.gif" /> <a id="contentButton_makeAppointment" href="Appointments.aspx?step=start"></a> <a id="contentButton_cancelAppointment" href="Appointments.aspx?step=cancel"></a> </div> <div id="contentRight"> <h3><asp:Label ID="lbl_homepageHeader" runat="server" Text=""></asp:Label></h3> <hr /> <asp:Label ID="lbl_homepageContent" runat="server" Text=""></asp:Label> </div> </div> <div id="contentBottom"></div> </asp:Content>

  Read the article

• Why does this service refuse to start on Windows server 2003?

  - by PenguinCoder

  We have a Windows 2003 server with Cebos MQ1 (ver. 7 and ver. GRI) products installed that have been operational for years. After installing Microsoft 2010 C++ Redistributable package needed for other development, the MQ1 GRI service now fails to start. Event logs showed that two additional updates (.NET4 and the 2010 C++ Redistributable SP2) where installed by the redistributable as well. As soon as we discovered the MQ1 service was not starting properly, we removed these three installed packages. However the service still does not start; the dialog that pops up states 'The service started then stopped. '. Event logs when we attempt to start the service show nothing; IE: No errors, crashes, failures, or other information related to this service. Executing the MQ1Serv.exe directly specifies an issue of 'Missing command line operation, must specify install, uninstall and company abbreviation.' sc query MQ1Service(GRI) shows a clean exit for the Win32ExitCode of 0x0. Attempting to reinstall the client or server software gives an error of 'The procedure entry point ReInitializeCriticalSection could not be located in the dynamic link library KERNEL32.dll.' at the 'Registering Libraries' stage. At this point, further research has stated that the required function is in URL.dll and to verify the library is not corrupted. Running an sfc /scannow on the server has replaced a few DLLS; including the URL.DLL to versions from 2005. This actually broke other applications which required a reinstall (one of them being IE 7). After reinstall and updates, url.dll version is 7.0.5730.13 (2009) and Kernel32.dll is version 5.2.3790.4480 (2009). The MQ1 GRI service still will not start, specifying the same error as previous 'Service started then stopped'. Running a disassembler on Kernel32.dll and Url.dll show no functions named ReinitializeCriticalSection. Attempting the reinstall of the MQ1 client and server as well as starting the service again, fails once more. However, setting the compatibility mode on the MQ1 client install exe to 'Windows 95' actually gets the program to install. Setting the compatibility mode on the MQ1 server service does not enable it to start. I have been researching this problem for nearly a week and besides the advice to scan and replace url.dll, have come to no successful conclusions. This service was operational prior to the 2010 C++ install, without any additional parameters or settings. After removing the C++ install and all servicepacks/updates it installed silently, still does not correct the issue of the MQ1 GRI service not starting. Q: Has anyone else run into this or similar issue while attempting to get a service initialized? What have I overlooked or what else can I try in order to get this service started??

  Read the article

• VirtualBox Port Forward not working when Guest IP *IS* specified (while doc says opposite)

  - by Patrick

  Trying to port forward from host (Mac OS X) 127.0.0.1:8282 - guest (CentOS)'s 10.10.10.10:8080. Existing port forwards include 127.0.0.1:8181 and 9191 to guest without any IP specified (so whatever it gets through DHCP, as explained in the documentation). Here is how the non-working binding was added: VBoxManage modifyvm "VM name" --natpf1 "rule3,tcp,127.0.0.1,8282,10.10.10.10,8080" Here is how the working ones were added: VBoxManage modifyvm "VM name" --natpf1 "rule1,tcp,127.0.0.1,8181,,80" VBoxManage modifyvm "VM name" --natpf1 "rule2,tcp,127.0.0.1,9191,,9090" And by "non-working", I of course mean not listening (as a prerequisite to forwarding): $ lsof -Pi -n|grep Virtual|grep LISTEN VirtualBo 27050 user 21u IPv4 0x2bbdc68fd363175d 0t0 TCP 127.0.0.1:9191 (LISTEN) VirtualBo 27050 user 22u IPv4 0x2bbdc68fd0e0af75 0t0 TCP 127.0.0.1:8181 (LISTEN) There should be a similar line above but with 127.0.0.1:8282. Just to be clear, this port is listening perfectly fine on the guest itself. And when I remove the guest IP (i.e., clear the 10.10.10.10) the forward works fine, albeit to eth0 (not eth1 where I need it). I can tcpdump and watch the traffic flow back and forth. And yes, I've disabled iptables entirely while testing -- it's not getting blocked anywhere on the guest. As VirtualBox writes in their documentation, you are required to specify the guest IP if it's static (makes sense, no DHCP record it keeps): "If for some reason the guest uses a static assigned IP address not leased from the built-in DHCP server, it is required to specify the guest IP when registering the forwarding rule:". However, doing so (as I need to), seems to break the port forward with nary a report in any log file I can find. (I've reviewed everything in ~/Library/VirtualBox/). Other notes: While I used the above command to add the third rule, I've also verified it showed up correctly in GUI and then removed/re-added from there just to make sure). This forum link -- while very dated -- looks somewhat related in that a port forward to a static IP was not appearing (perhaps they think due to lack of gratuitous arp being sent for host to know IP is there/avail?). Anyway, what gives? Is this still buggy? Any suggestions? If not, easy enough workarounds? What's interesting is that this works perfectly fine on another user's Mac, however he's running a slightly older version (4.3.6 v. 4.3.12).

  Read the article

< Previous Page | 705 706 707 708 709 710 711 712 713 714 715 716  | Next Page >