Search Results

Search found 2042 results on 82 pages for 'booting'.

Page 71/82 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

• How to create Windows Vista/Windows 7 Startup disk or Rescue disk or system restore points on a CD?

  - by goldenmean

  Hello, I have two laptops, one having Windows-Vista home premium and other one having Windows-7 professional. Both versions of OS are OEM installs(pre-installed when I bought the laptop) and I do not have the Windows Installation disks for them. usually the installation disks provide a repair option in case one needs to repair/rescue a improper windows installation. But since I dont have the installation disks, I want to create rescue disks/startup disks for these. My questions are : 1] How to create a system rescue disk/startup disk on a CD from these two versions of Windows? 2] Doesn't the system restore points which Vista/Windows-7 create, cannot be created on a CD disk instead of hard-disk? 3] If I have a manual backup of my windows registry, in which I have exported all the registry to a file and I have that file on a CD, how to restore that registry back to the windows installation which might not be booting up properly due to bad registry problem. EDIT: 4]Is there any way to use these system restore points directly during bootup of the laptop, if windows does cannot boot properly due to problem. First laptop is HP Pavillion dv6646 and second one is Sony VAIO VCPEE series. thank you. -AD

  Read the article

• How can I control which sound card Ubuntu uses for playback?

  - by GorillaSandwich

  I am dual-booting Ubuntu 9.04 and Windows XP but am new to Ubuntu. In Windows, I use an M-Audio Audiophile 2496 sound card for recording (because it has RCA input jacks for my mixer), but I don't use it for playback (because my speakers use a 1/8 inch jack); instead, I use the motherboard's built-in sound card. I tried to recreate this arrangement in Ubuntu, but despite selecting the built-in card for all playback under System > Preferences > Sound, I still have inconsistent results. Rhythmbox plays back through the integrated card, but Flash content in the browser and games in the OS send their audio to the Audiophile card. I have seen recommendations to use a program called "Jack" to control this, but I installed it and found it baffling. How can I control which card is used for playback, other than disabling one card (as I discovered how to do and explain below)? Also, is there a GUI for disabling hardware, or is it necessary to edit a configuration file?

  Read the article

• FreeBSD rc.d script doesn't work when starting up

  - by kastermester

  I am trying to write a rc.d script to startup the fastcgi-mono-server4 on FreeBSD when the computer starts up - in order to run it with nginx. The script works when I execute it while being logged in on the server - but when booting I get the following message: eval: -applications=192.168.50.133:/:/usr/local/www/nginx: not found The script looks as follows: #!/bin/sh # PROVIDE: monofcgid # REQUIRE: LOGIN nginx # KEYWORD: shutdown . /etc/rc.subr name="monofcgid" rcvar="monofcgid_enable" stop_cmd="${name}_stop" start_cmd="${name}_start" start_precmd="${name}_prestart" start_postcmd="${name}_poststart" stop_postcmd="${name}_poststop" command=$(which fastcgi-mono-server4) apps="192.168.50.133:/:/usr/local/www/nginx" pidfile="/var/run/${name}.pid" monofcgid_prestart() { if [ -f $pidfile ]; then echo "monofcgid is already running." exit 0 fi } monofcgid_start() { echo "Starting monofcgid." ${command} -applications=${apps} -socket=tcp:127.0.0.1:9000 & } monofcgid_poststart() { MONOSERVER_PID=$(ps ax | grep mono/4.0/fastcgi-m | grep -v grep | awk '{print $1}') if [ -f $pidfile ]; then rm $pidfile fi if [ -n $MONOSERVER_PID ]; then echo $MONOSERVER_PID > $pidfile fi } monofcgid_stop() { if [ -f $pidfile ]; then echo "Stopping monofcgid." kill $(cat $pidfile) echo "Stopped monofcgid." else echo "monofcgid is not running." exit 0 fi } monofcgid_poststop() { rm $pidfile } load_rc_config $name run_rc_command "$1" In case it is not already super clear, I am fairly new to both FreeBSD and sh scripts, so I'm kind of prepared for some obvious little detail I overlooked. I would very much like to know exactly why this is failing and how to solve it, but also if anyone has a better way of accomplishing this, then I am all open to ideas.

  Read the article

• Missing MB on a GPT partioned SSD

  - by pisswillis

  I recently installed Arch Linux on an Intel 40GB SSD. I used GPT for partioning (via GNU parted) and created the following partions: /dev/sda1 : 1 MB, no FS, flag=bios_grub /dev/sda2 : 30MB, /boot, ext2, flag=boot /dev/sda3 : 20GB, /home, ext4 /dev/sda4 : ~20GB, /, ext4 After struggling to install grub2 from the livecd environment (which I finally did via grub-install /dev/sda --root-directory=/mnt/ --no-floppy --force) I got a working system. However, when I was inspecting disk usage with df I noticed that my home partition had around 170MB of used space on it. This surprised me because the only things on /home were one users .bashrc, .bash_history, and .lesshst. du confirmed that there was only a few KB of space being used on /home. Why does df report approximately 170MB being used when du does not? Is this space "gone forever", or can I regain it by repartioning and/or reinstalling? When I installed grub2 it said something along the lines of "your embed area is too small", and that I could "use BLOCKLISTS, but BLOCKLISTS are UNRELIABLE". In the end the only way I could get a system booting from the SSD was to use blocklists via the grub-install --force flag. Is this related to the mysterious missing 170MB? Thanks

  Read the article

• How does one skip "Windows did not shut down successfully" in Win7-64?

  - by XenonofArcticus

  Migrating an app from an expensive and unreliable dedicated embedded x86 box running WinXP-embedded to COTS hardware (Dell E6410 laptop) running normal Win7-64. At this time, it's not feasible to deploy using Windows 7 embedded. The problem is, that the system is still sort of "embedded". The power could shut off at virtually any time without prior warning. We've stripped the OS down and removed the battery capability so that it will power down as desired. The app never writes to the disk, so it's not like we're going to corrupt anything terribly. The system is essentially idle after our app is up and running (with the exception of some computation, graphics, and TCP/IP and serial communications) so the OS enters a pretty stable state rather quickly. After a power-loss however, it rightly complains that Windows did not shut down successfully and presents the user with the Windows Error Recovery text screen. If left alone, it does eventually move on booting just fine, but we'd like to skip that step if possible. WinXP-embedded is designed to do this automatically, so I know it's possible. I've looked at the Kernel Switches but I didn't see anything documented for "Skip Windows Error Recovery". I've also read extensively on the startup process: http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/windows-nt-6-boot-process.html I know I can disable the auto chkdsk in the registry, but that's not the same thing either. So, how do I streamline the boot process to not hassle the user about a situation that will be the regular normal situation?

  Read the article

• pxe boot dos 7.x / 8.x on modern mainboard without floppy controller

  - by GitaarLAB

  How to pxe boot MS DOS 7.x / 8.x on a modern pc (mainboard without floppy controller) without using an external usb floppy drive? MS DOS 6.22 and earlier or other flavors pxe boot just fine on floppy-less hardware. But DOS 7.x and 8.x renders an error on boot: "Type the name of the Command Interpreter (e.g., C:\WINDOWS\COMMAND.COM) I read somewhere during research this was a rather unknown error, that started to become more common due to the advent of floppy-controller-less hardware. On some hardware (bios dependent) one could plug a usb-floppy-drive in the computer before booting (but that MIGHT also require it to be a "golden floppy drive" (as they where called back then). From a russian site (I read about a year ago and cannot find the hyperlink) MS-Dos versions 6.22 did some-kind of floppy-drive reset during initialization and since it couldn't connect to the floppy-host thus the error. How can I resolve this (without a physical external usb floppy)? Might there be some kind of virtual floppy-driver that could resolve this (for example to be loaded before the dos image loads)? Or could someone point me into the right direction (maybe even a hex-address and some further explanation or something)? I'm using syslinux by the way.

  Read the article

• Repairing hard disk when Windows installation disk won't boot

  - by Echows

  I'm trying to recover some data from a faulty hard disk with Windows installed on it (on which Windows won't even boot). I have tried so far: Booting to Ubuntu live USB stick and running ntfsfix (didn't work) Trying to mount the broken partition when running Ubuntu from usb stick (doesn't mount) Running photorec image recovery tool from live Ubuntu (it found some stuff but not the images I was looking for) Now as a last resort I got myself a Windows installation on a USB stick so that I can try fdisk, but the installer doesn't work. The loading screen shows up and then the installer crashes. The installer works fine on other computers. I suspect that the installer is trying to read the hard drive to see if there's something there but when it can't read one partition, it crashes. On Ubuntu, I can mount other partitions except the one I'm interested in so at least the hard drive is not completely dead. So the question is, what options do I have left? To be more specific, my goal is to recover some images from the faulty ntfs-partition on the hard drive. Other than that, I don't care about the contents of the hard disk.

  Read the article

• trouble shooting ntfs-loop-xen combination in wubi based grub of Ubuntu

  - by Registered User

  Here is a situation I installed Ubuntu on a laptop using Wubi in Windows 7 drive.*The laptop is not mine.*I have installed and things worked by now perfectly without any problem.We are trying to set up a Xen (virtualization)environment in this laptop. After setting up every thing cleanly.When I needed to boot with following grub entries menuentry "Xen Linux 2.6.32.27" { insmod ntfs set root='(hd0,2)' loopback loop0 /ubuntu/disks/root.disk set root=(loop0) multiboot /boot/xen.gz module /boot/vmlinuz-2.6.32.27 dummy=dummy root=/dev/sda2 loop=/ubuntu/disks/root.disk ro console=tty0 module /boot/initrd.img-2.6.32.27 } I got error file not found error unknown command 'multiboot' error unknown command 'module' error unknown command 'module' Now to dig this issue further I reboot the machine and go to grub command prompt and manually pass on each of the above parameters which you see in the grub entry when I reached grub> insmod multiboot then I got following message on screen error:file not found. It looks like this wubi+ grub setup has just enough modules to use loopback file on ntfs, but the ACTUAL /boot directory is on the loopback NOT ntfs (hd0,2). Therefore any attempt to read any files from (hd0,2) simply wont work, cause there's no file there.I need to use insmod multiboot and command multiboot and module which are available in grub on a normal install without Wubi.But since the laptop is not mine so I am not allowed to partition it and have to make it work in this situation only. While a normal Kernel is still booting? How can I get module multiboot in this Wubi based install.

  Read the article

• How do I restore a Windows Server 2008 R2 bare metal backup to a Windows Server 2012 R2 Hyper-V instance?

  - by Michael J. Gray

  I have been trying to find a simple way to migrate a physical Windows Server 2008 R2 installation over to a virtual machine hosted on Windows Server 2012 R2 Datacenter Edition /w Hyper-V. I came across the bare metal backup feature on Windows Server 2008 R2 and assumed I would be able to easily back it up and simply restore it into a new virtual machine by booting the installation media and getting into the Windows recovery process. When I attempted this, Hyper-V got into a network based restore process, but I do not have a PXE server or anything like that and I would rather not set it up. I tried mounting the VHD produced in the bare metal backup, just to see if it would somehow work, but it of course did not and failed with an error related to an incorrect boot device. I checked the virtual machine's BIOS settings and everything looked fine. I did not expect this to work anyway, so I stopped working through this method any further. Is there a way to take my bare metal backup and restore it into a virtual machine without a PXE server or SCVMM? I am opening to using proprietary tools but since the last time I did this I used Norton Ghost, which is no longer supported, I figured I would try doing it with what is readily available.

  Read the article

• No video signal at boot with custom built computer

  - by Bart Pelle

  After booting my custom built computer, neither the VGA nor the HDMI methods from the video card seem to emit any signal to the display. I have tested both a regular VGA screen and a modern HDMI screen. Both did not receive signal. Below are the specifications from my computer build: Intel Core i5 3350P ASRock B75 Pro 3-M Seagate Barracuda 7200.14 ST1000 DM003 1000GB Corsair Vengeance LP CML 8GX 3M2 A1600 CGB Blue (2 cards) Cooler Master B Series B600 Club 3D Radeon HD7870 XT Jokercard Samsung SH-224 BB Black Sharkoon T28 Case The motherboard does not emit any beeps on startup. The CD tray opens properly and all fans spin. All cables are properly connected. All components are new and no damage was found on any of the components. The fans on the GPU spin aswell. The VGA test we did was by using the onboard graphics from the Intel i5, but this gave no result. The HDMI test was from the GPU which did not emit any signal either. We have not been able to test out the DVI, could this be important to test, even though all the other methods did not work? Thank you for your time and hopefully reply.

  Read the article

• Debugging Windows PC freeze

  - by Violet Giraffe

  I have a problem with my computer, would appreciate any hints/ideas. It usually begins not immediately after booting Windows, but at some unpredictable point in time, which doesn't seem to correlate with any specific actions of mine. First sign of a problem is process System starting to consume 25% CPU time steadily. I have a quad-core CPU, so it might be one thread working non-stop. At this point micro-freezes start to occur - screen stops refreshing, but if I have, say, music player running - it continues playing. If I try to do something between the freezes, like open Start menu, it will freeze completely and forever. If I press reset button the PC will shut down and then start cold, as opposed to usual reset behavior (which doesn't include PC shutting down). I have noticed that full restart upon reset is usual for hardware problems, but I think this problem isn't related to at least motherboard-CPU-RAM-videoadapter. It certainly isn't caused by overheating. One very important not is that it seems to be related to Windows hosted WLAN network: I have USB Wi-Fi dongle and have configured a hosted network to share cable Internet connection with Wi-Fi devices. I am not 100% certain there's a strong connection, but in 9 or 10 cases when I enabled the network (by executing netsh wlan start hostednetwork), it did freeze eventually (sometimes within minutes of starting the network, sometimes within hours), and on at least 10 days when I didn't start the network it never froze, no matter how I used the computer). There are no critical/error entries in the events log that I can suspect as being related, only regular stuff like "driver not loaded". I have found no critical/error events that are being logged around the time of freeze occurring and are not logged during normal boot without starting the WLAN.

  Read the article

• 2011 i7 Macbook Pro unable to boot from any Windows CD?

  - by Craig Otis

  I'm encountering issues installing Windows alongside my Lion install. I'm attempting to install from the internal SuperDrive, after using Boot Camp to partition what was a single, HFS+ volume. When holding down Option at boot, the CD appears in the startup list, but upon selecting it, I get a gray screen for 5 minutes, then a flashing white folder. I tried installing rEFIt and using this to boot the CD, but I receive an error about "Not Found" being returned from the "LocateDevicePath", and a mention of the firmware not supporting booting using legacy methods. In the Console, when opening the StartupDisk preference pane (which never presents the CD as a selectable option), I see: 11/25/11 4:39:31.159 PM System Preferences: isCDROM: 0 isDVDROM:1 11/25/11 4:39:31.159 PM System Preferences: mountable disk appeared: /Volumes/GRMCPRFRER_EN_DVD 11/25/11 4:39:33.214 PM System Preferences: - So far so good, passing disk to System Searcher. 11/25/11 4:39:33.218 PM System Preferences: OSXCheck: No boot.efi in System Folder or volume root. 11/25/11 4:39:33.220 PM System Preferences: WinCheck: Not a valid windows filesystem: /Volumes/GRMCPRFRER_EN_DVD 11/25/11 4:39:33.220 PM System Preferences: WinCheck: Not a valid windows filesystem: /Volumes/GRMCPRFRER_EN_DVD I'm at a loss here. I've done my research, but it sounds like most of the rEFIt errors of this nature are caused by installing from a thumbdrive, or an external drive. I'm using the internal SuperDrive. Also, I've tried this with two different disks: A Windows XP SP2 CD A Windows 7 x86 DVD Both are disks I've had around for years, and I've used them reliably in the past. The system is an early 2011 15" Macbook Pro, all firmware updates installed.

  Read the article

• Hardware freeze during disk activity

  - by Thomi

  I built myself a linux-based NAS. It has several drives of various sizes and ages in an LVM configuration, with 800GB or so of data. The data is served using a simple samba server. This was working flawlessly, but after physically moving it, it has developed a strange fault: Whenever I do something on the server to cause disk activity, the entire machine freezes hard. This has the effect of killing any open network connections to the box, and generally making it useless. If I leave the machine for a few minutes it seems to come right again, but obviously this isn't really a solution. There are no error or warning messages in syslog, or the kernel logs. If I power the machine on, and leave it, it runs for several days without locking up. After that time I stopped testing. It doesn't freeze instantly - obviously it doesn't freeze while booting, and I can normally log in via SSH and start poking around in a few log files for a couple of minutes before it dies. My question is: What diagnostic tests can I run to determine the casuse?

  Read the article

• How to reinstall Windows 7 Embedded?

  - by Joshua Lim

  I need to reinstall Windows 7 Embedded on my server but I'm not able to do so despite repeated tries. I tried booting up the server with the Windows Embedded 7 Setup ISO attached (using IPMI) and I've also tried running setup.exe in the CDROM after Windows has booted up. Both methods fail. In the first case, the server simply reboots by itself after I selected "IBW" button. In the second case, the installer returns some files missing while installing. I'm sure my Windows Embedded 7 Setup ISO is correct, because earlier on, I used IBW on the same ISO to install Windows Embedded 7 onto the server. Of course, the C drive has empty when I first installed. What should I do? I read that the normal Windows 7 (not embedded version) installer allows you to reformat the C drive before re installing. There does not appear to be such an option for Windows embedded. Appreciate any tip. Thanks.

  Read the article

• tab complete not working for vim in particular directory - ubuntu 12.04

  - by user1160958

  I am working on a ruby on rails app. All of the sudden the command line tab complete stopped working for vim, only for files though, and only for the vim command (i.e. works for other commands, ls, rm etc.) After further investigation - this only occurs in a specific directory, the home directory of my rails app. If I go into a sub directory in my rails app, or any other directory on my machine, the tab complete works again. If I go into the root directory of any other rails app, it works. I also tried renaming the diretory, and copying the contents of the directory to another directory, and that did not work either. It only does not work for files, and works for any other command - ls, rm etc. But when I do vim /path/to/file/, then tab to see a list of files in that directory, only other directories show, not files. I am using ubuntu 12.04. Also, I tried re-installing vim, re-booting, removing ~/.viminfo (there was no vimrc file) that didn't work. Any help would be appreciated!

  Read the article

• Blank list of windows services

  - by Joe

  Recently when I open windows services (always as administrator) I get a blank list of services: When I try and click on one of the empty lines I get this "Script Error" message: This happens over and over again, after several times I restarted my computer. I can't pinpoint exactly when this started happening or if I made any specific changes to my computer at that time. Someone told my to try running scf /scannow as administrator, but when I try to do that the scan stops at 34% and I get the message: "Windows Resource Protection could not perform the requested operation." I am running Windows 7 Enterprise 64 bit, and I would really like to avoid reinstalling windows. Does anyone know how to fix this? Edit - Here is another attempt I made and some more information that might help: Following WhoIsRich's suggestion, I tried the command sfc /scannow /offbootdir=c:\ /offwindir=c:\windows. This gave the error message "The arguments passed to sfc are invalid. The offline windows directory specified points to the online system", and then I realized this command is meant to be run after booting from another system. Since I don't have my windows installation disk right now, I used my own system to create a recovery disk, and then restarted my computer and used the recovery disk to boot. I then ran the above command, and I got the following message: "Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.log". I then restarted my computer and let it boot up normally. The problem with windows services persists, and the CBS.log file is a long log file with many entries, and I don't know if there is useful information in it, and if there is, how to find it.

  Read the article

• Dell PowerEdge 860 won't boot but gets power

  - by fierflash

  I have a Dell PowerEdge 860. Got an 2008 R2 running on it. Here is the scenario I'm currently in: I can boot it up and work as usuall. But when I restart it, it just shuts down, doesn't reboot, and it won't boot up again. Then it stays in this "mode", On/off button blinking green(standby mode?) and System Indicator LED blinking amber. If I try to press the On/Off button on the frontpanel it won't boot. It's like you can hear the fan from the PSU running but nothing else is trying to boot. If I unplug the powercable and then put it back in again it's the same, the extremley noisy fans won't start and it's just sitting there. If I let it "rest" for like 1 to 24 hours while the powercable is unplugged and I plug it in again, it boots directly, without me having to push the On/Off button. What I have tried: Run diagnostics(not the one in POST phase) and everything is fine Booting without any cables except the powercable Boot without memory installed Boot without the raidcable plugged in Cleared NVRAM Reseated all the components and cables Googling like a freak for any possible solution Tried Dell Support but I don't have any warranty left so they can't help me unless i pay some ridiculous amount of money I suppos Do anyone have some experience with the same issue? Do I need to replace something or is there any other way to determine the problem? Any help will be greatly appreciated.

  Read the article

• Windows 7 loses correct time zone upon reboot

  - by Android Eve

  I have a standard PC running Windows 7 Ultimate (64-bit). For some reason, it refuses to keep the correct time zone (the BIOS battery is OK) when restarted. Note (1): The Time zone is correct. The "Internet Time" tab also shows "this computer is set to automatically synchronize with 'time.windows.com'. When I click the 'Change settings...' button, the 'Synchronize with an Internet time server' checkbox is checked. Still, upon reboot, the time is skewed by 6 hours... and doesn't correct itself even after waiting hours for this "automatically synchronize" to occur. Note (2): The BIOS time is set to local (i.e. not UTC). When I restart Windows 7 without booting to the other OS installed in dual-boot config (Ubuntu Linux), it seems to correctly remember the time. This may explain immediate time upon reboot, but it doesn't explain why Windows 7 won't automatically 'Synchronize with an Internet time server' even after an hour. Why is this happening and how do I correct this?

  Read the article

• Setup proxy with Apache 2.4 on Mac 10.8

  - by Aptos

  I have 1 application (Java) that running on my local machine (localhost:9000). I want to setup Apache as a front end proxy thus I used following configuration in the httpd.conf: <Directory /> #Options FollowSymLinks Options Indexes FollowSymLinks Includes ExecCGI AllowOverride All Order deny,allow Allow from all </Directory> Listen 57173 LoadModule proxy_module modules/mod_proxy.so <VirtualHost *:9999> ProxyPreserveHost On ServerName project.play ProxyPass / http://127.0.0.1:9000/Login ProxyPassReverse / http://127.0.0.1:9000/Login LogLevel debug </VirtualHost> ServerName localhost:57173 I change my vim /private/etc/hosts to: ## # Host Database # # localhost is used to configure the loopback interface # when the system is booting. Do not change this entry. ## 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost 127.0.0.1:9999 project.play and use dscacheutil -flushcache. The problem is that I can only access to localhost:57173, when I tried accessing http://project.play:9999, Chrome returns "Oops! Google Chrome could not find project.play:9999". Can somebody show me where I were wrong? Thank you very much P/S: When accessing localhost:9999 it returns The server made a boo boo.

  Read the article

• Relaying to tech "support" that computer is actually broken.

  - by Sion

  First some background: I have a Dell Inspiron 15R M050, it is still under the Dell limited warranty and the Best Buy Extended warranty. I am currently dual booting Debian Squeeze and Windows 7, the only reason I go into Windows is to play video games specifically steam games. Issue: When I play my games in Windows I am capable of playing for anywhere from 5 minutes to 2 hours before I suffer a hard-lock. I cannot alt-tab, ctrl-alt-delete, ctrl-shift-escape do anything for 2-3 minutes. After this hard-lock period everything runs fine, I can continue the game for probably another hour at least before I suffer another lock. Games: Borderlands, Splinter Cell: Chaos Theory, Starcraft 2, Garrys Mod What I have tried: Running the diagnostic suite in the dell bios, restoring the OEM Windows recovery partition on the HD, fresh installing Windows 7 Professional, updating BIOS, Calling tech support and having them run a software Hardware Diagnostics suite. The question: I think from the research that I have performed that it might be a lack of thermal paste on the CPU, would I be able to go to Best Buy and have them do a hardware diagnostic from the hardware level then have them be able to tell Dell that there is a hardware issue? Or would there be a different problem?

  Read the article

• How to configure a Linux kernel based on the modules currently in use?

  - by Carla

  Hello, I'm willing to build a minimal kernel with only the needed things for my machine; so I started by compiling the kernel from the ground up, using the default configuration and adding things that I know for sure I have (i.e.: Ethernet card, WiFi card, ...). But there are several other things not so easy to know about (i.e.: the watchdog timer) so I came across AutoKernConf which supposedly detects the hardware of the machine and generates a kernel configuration file with the settings for the found devices. The problem is it contained several settings repeated and even some which I don't have (I'm using a Dell laptop and one of the things it "found" was something of a Toshiba one). So I ended up building a kernel with the configuration that came out of the make allmodconfig command, which is a kernel with most of the things compiled as modules. Booting into that kernel and running lsmod I can see all of the kernel modules in use (the ones really needed) and I would like to know if there is a tool or some way for me to parse that list and convert it to the corresponding kernel configuration file. Or how to map each one with the appropriate options in the kernel so that I can manually set them. Thank you very much for your time.

  Read the article

• Alienware Aurora R2 Slow Boot Up

  - by James R

  I have an Aurora R2 bought a few years ago, and recently I decided a RAM update and new Samsung SSD would be good for speed. So now it's super fast, with the exception of booting up. It still takes good 2 minutes to get past the first splash screen on the BIOS, it's only the BIOS, after that it's like lightning. I've Googled the issue, and the usual problem is the BIOS trying to boot from anything it can, with the fix being to change the boot menu. However I've changed it now, and it's still slow. When I disconnect the USB devices it speeds up, but I can't do that every time I want to boot the PC up! The only other option I can think of is upgrading the BIOS, however it seems that A04 is the recommended on for Aurora R2s, so I don't know if upgrading the BIOS could cause issues, especially not if it doesn't solve the issue. Also, when I disable my original hard drive in the boot menu, the PC won't boot up. Despite the Samsung one being fine to boot from, and the original not being needed as far as I know for starting Windows, it gives me an error message and makes me restart the PC, with a new boot configuration (with the original drive as second choice). Any ideas on how to make the BIOS boot faster? And why I need to have my original drive in the boot menu?

  Read the article

• How to clone a HDD and then use the clone with VMware (so that Windows works!)?

  - by Ahmad

  I have a system on which Windows 7 is installed, and I am trying to make a clone of its HDD image, which I then want to use in my main PC with VMware, so that I can boot Windows 7 off the cloned HDD. I used Ultimate Boot CD v5.1.1 with the system whose HDD I wanted to clone, and I cloned it using EaseUs Disk Copy, which comes with Ultimate Boot CD. The source HDD was 250 GB in size which had 3 partitions, while the USB HDD I attached to the system, which was supposed to be the destination/clone HDD, was 320 GB in size. I chose to create an exact replica, and so 250 GB worth of data (partitions, etc.) was copied exactly, and the rest of the space was un-allocated. I now connected this USB HDD to my main PC, fired up VMware Workstation 8 and defined a new Virtual Machine, and chose to boot off the USB HDD. Result is that when Windows is booting (from the cloned HDD inside VMware), I get the blue screen error before I reach the login screen. How can I change my methodology so that Windows even boots from the clone? I can change any tools I use, etc.

  Read the article

• ESXi 5 Guests will not boot

  - by Adrian

  I have a problem with Guests not booting under VMWare ESXi 5.0 on my IBM x3550M3 server. Note: Investigation eventually determined that problem was with the VMware client on a Lenovo Edge laptop, the only Windows box available in a Linux IT shop. vSphere Client v4 and v5 duplicated behavior on the Lenovo Edge. As indicated in the comment to the accepted answer, replacing the workstation with one using different video was the "fix" for this particular issue. The ESXi host boots just fine. The Client connects just fine. Guests can be configured but do not successfully boot. The initial guest memory consumption jumps up to 560MB and drops down to 40MB after a few seconds. Initial CPU usage is 1 full CPU (3000Ghz per the chart) and immediately drops downm to 29Mhz. Guests do not display any output in the Console tab but show a state of 'Powered On'. No errors in the Events tab. Switching Guest from BIOS to EFI makes no difference. VMs are listed as Version 7 and the behavior is duplicated across all availabled Guest OS flavors. Problem also duplicated when server is booted up in Legacy Only mode. Logs do not contain anything particularly suspicious. Edit: No firewalls, routers, or VLANs in between the client and server. Edit 2: We have tried to Boot Guest into BIOS screen at Next Boot checkbox in the Guest Setting. Was not successful. Edit 3: 500GB datastore with 1 40GB VM on it. Plenty of space. Edit 4: Guests copied from my old ESXi 4 server DO NOT boot on the ESXi 5 system. Initially it complains about too little Video RAM being configured for the default 2500x1600, but it still doesn't work properly even after I bump the Video RAM settings or switch it to Auto-Detect.

  Read the article

• VMware "boot screen" - add info like contact, phone number, etc.?

  - by TheCleaner

  I've tried searching Google and VMware's KB but maybe I'm not typing the right search criteria...only finding ways to fix problems with booting or screen issues. On the default boot screen of a host it looks similar to this picture from GIS: I'm curious if it is possible somehow to make it look like this instead (adding custom details): I know for the most part the info is "useless" since it is administered remotely, etc. But when I deploy standalone hosts to branch offices, it'd be nice for them to see this type of info on the boot screen. I may also include the VMs hosted on it (again on standalone hosts). Normal monitoring, etc. will be done remotely. This is strictly for odd times when the branch contact may say "the electricians are saying they need to turn off this circuit but I have no idea who to call in IT to tell them this box needs to be shut down" or similar. Anyone who has dealt with small branch offices can tell you that if it isn't labeled they easily forget what it is for and will simply say after the incident "I didn't know what it was or who to call." Possible?

  Read the article

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >