Search Results

Search found 10406 results on 417 pages for 'device'.

Page 71/417 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

  • How to mount an external HDD?

    - by Slash
    I have Ubuntu Linux 12.04 version the latest right now.I want to mount an external HDD NTFS 1TB.I have followed many guides but still no success.The error I'm getting is this: Failed to read last sector (1953523119): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/sdb1': Invalid argument The device '/dev/sdb1' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? Using Storage Device MAnager i get this error:Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/Skliros_Diskos {external disk name} When I use sudo fdisk -l, this is the output: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e0bc6 Device Boot Start End Blocks Id System /dev/sda1 * 2048 618854399 309426176 83 Linux /dev/sda2 618856446 625141759 3142657 5 Extended /dev/sda5 618856448 625141759 3142656 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000202043392 bytes 255 heads, 63 sectors/track, 121600 cylinders, total 1953519616 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002093a Device Boot Start End Blocks Id System /dev/sdb1 2048 1953525167 976761560 7 HPFS/NTFS/exFAT

    Read the article

  • Kingston SD reader not working for USB3

    - by user1146334
    I have a Kingston 4-in-1 Multimedia reader. When my PC was formatted with Win7 it worked fine. I decided to change to Ubuntu 14.04 and now it doesn't work. If I plug it into one of the USB2 ports it works fine, but whenever I plug it into one of the USB3 ports, it thinks about it for a minute and then dies. Here's the output of dmesg when it dies [110262.148656] usb 4-1: new SuperSpeed USB device number 3 using xhci_hcd [110262.170330] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [110262.266379] usb 4-1: New USB device found, idVendor=11b0, idProduct=6348 [110262.266386] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [110262.266390] usb 4-1: Product: USB3.0 Media Reader [110262.266394] usb 4-1: Manufacturer: Kingston [110262.266398] usb 4-1: SerialNumber: 08735314400198 [110262.272929] usb-storage 4-1:1.0: USB Mass Storage device detected [110262.273239] scsi15 : usb-storage 4-1:1.0 [110263.290056] scsi 15:0:0:0: Direct-Access FCR-HS3 -0 1.00 PQ: 0 ANSI: 4 [110263.306622] scsi 15:0:0:1: Direct-Access FCR-HS3 -1 1.00 PQ: 0 ANSI: 4 [110263.323292] scsi 15:0:0:2: Direct-Access FCR-HS3 -2 1.00 PQ: 0 ANSI: 4 [110263.339858] scsi 15:0:0:3: Direct-Access FCR-HS3 -3 1.00 PQ: 0 ANSI: 4 [110263.340332] sd 15:0:0:0: Attached scsi generic sg3 type 0 [110263.340706] sd 15:0:0:1: Attached scsi generic sg4 type 0 [110263.340850] sd 15:0:0:2: Attached scsi generic sg5 type 0 [110263.340975] sd 15:0:0:3: Attached scsi generic sg6 type 0 [110264.651847] sd 15:0:0:1: [sde] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) [110264.667049] sd 15:0:0:1: [sde] Write Protect is off [110264.667055] sd 15:0:0:1: [sde] Mode Sense: 2f 00 00 00 [110264.682767] sd 15:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [110264.694975] sd 15:0:0:2: [sdf] Attached SCSI removable disk [110264.697933] sd 15:0:0:3: [sdg] Attached SCSI removable disk [110264.729918] sd 15:0:0:0: [sdd] Attached SCSI removable disk [110264.754189] sde: sde1 [110264.760114] sd 15:0:0:1: [sde] Attached SCSI removable disk [110275.377368] usb 4-1: reset SuperSpeed USB device number 3 using xhci_hcd [110275.398453] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [110275.436592] xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802e4fb9980 [110275.436600] xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802e4fb99c0 [110277.263444] usb 4-1: USB disconnect, device number 3

    Read the article

  • Testcase runner for parametrized testcases

    - by Razer
    Let me explain my situation. I'm planning a kind of test case runner for doing testcases on external devices, which are microcontroller based. Lets consider the devices: Device 1 Device 2 There exist a lot of test cases which can be run with one of the devices above. For example: Testcase 1 Testcase 2 The main reason that all the testcases can be run with any device is, that the testcases validates some standard and this software should be extensible for future devices. The testcases itself must be runnable with changing parameters. For example Testcase 1 does some Timing Verification the testcase needs as input parameter the datarate: 4800, 9600, 19200. Now hoping you understand the situation, let me explain my design questions. For implementing the test cases I thought about an Attribute based approach, like nunit does it. The more complicated problem is, how to define the parametrized testcases? Like this: Device 1: Testcase 1: datarate: 4800, 9600, 19200 Testcase 2: supply: 1, 2, 3 Device 2: Testcase 1: datarate: 9600, 19200, 38400 Testcase 2: supply: 3, 4, 5 How would you design such a framework? I've done a similar desin in python where I had for every device a XML containing the testcase definitions like: <Testcase="Testcase 1" datarate=4800/> <Testcase="Testcase 1" datarate=9600/> <Testcase="Testcase 1" datarate=19200/>

    Read the article

  • configuring USB modem( Huawei EC156) in ubuntu 13.10

    - by user205427
    I am facing difficulty in installing my USB modem in Ubuntu 13.10. Contrary to what many have suggested,it does not get detected automatically, nor does setting a new connection help. USB Device is listed in lsusb, but not under network manager or Devices, it is detected as a CD-ROM, what I understood from the web was that usb-modeswitch can be used to switch it to a USB device. Even 'Enable Mobile Broadband' option is not shown in network manager. What was interesting is when I start laptop with windows 7 and use the USB modem and after that restart with Ubuntu, both Enable Broadband and the mobile broadband connection can be seen. Sadly, internet connection could not be installed. I tried using USB-modeswitch command as suggested somewhere, but it does not seem to work. Following is the message. Take all parameters from the command line * usb_modeswitch: handle USB devices with multiple modes * Version 2.0.1 (C) Josua Dietze 2013 * Based on libusb1/libusbx ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x12d1 DefaultProduct= 0x1505 HuaweiMode=1 NeedResponse=0 InquireDevice enabled (default) Look for default devices ... found USB ID 8087:0020 found USB ID 1d6b:0002 found USB ID 0461:4db6 found USB ID 12d1:1505 vendor ID matched product ID matched found USB ID 138a:0007 found USB ID 03f0:231d found USB ID 8087:0020 found USB ID 1d6b:0002 Found devices in default mode (1) Access device 005 on bus 001 Get the current device configuration ... OK, got current device configuration (1) Use interface number 0 Use endpoints 0x08 (out) and 0x87 (in) Inquire device details; driver will be detached ... Looking for active driver ... OK, driver detached INQUIRY message failed (error -9) USB description data (for identification) ------------------------- Manufacturer: HUA?WEI TECHNOLOGIES Product: HUAWEI Mobile Serial No.: ??????????????????? ------------------------- Send old Huawei control message ... -> Run lsusb to note any changes. Bye! I am stuck with this problem for 4 days now, any help would be appreciated

    Read the article

  • Ubuntu 12.04 installation on GPT + RAID going into grub rescue

    - by Proy
    I have two 2TB disks. I am installing Ubuntu 12.04 using the alternate version of the server cd. On the partitioning page I have done my partitioning as follows /dev/sda1 - 32 MB - bios_grub /dev/sda2 - 50 GB -raid device /dev/sda3 - 8 GB -raid device /dev/sda4 - Balance full GB - raid device /dev/sdb1 - 32 MB - bios_grub /dev/sdb2 - 50 GB -raid device /dev/sdb3 - 8 GB -raid device /dev/sdb4 - Balance full GB - raid device After this I have setup raid devices /dev/md0 for /(/dev/sda2 + /dev/sdb2) for / ext4 /dev/md1 for swap( /dev/sda3 + /dev/sdb3)for swap /dev/md2 for /home(/dev/sda4 + /dev/sdb4)for /home ext4 The installation finishes it shows that it is installing grub to /dev/sda and /dev/sdb. But once the system reboots it falls into grub rescue mode. on doing ls I can not see the md devices only hd once. I also tried booting into rescue mode with the install cd and doing grub-install /dev/sda and /dev/sdb. What am I doing wrong ? Why is grub2 not detecting the raid revices ? UPDATE: I just did the same steps with Ubuntu 10.04 and it worked perfectly fine. I wiped out the RAID and partitions and everything and did it from scratch. I think the issue is with Ubuntu 12.04 and the way it partitions 2 TB disks

    Read the article

  • Copying photos from camera stalls - how to track down issue?

    - by Hamish Downer
    When I copy files from my camera (connected via USB) to the SSD in my laptop a few files get copied and then the copy stalls. I'm not sure why, any ideas or things to investigate appreciated, or bug reports to go and look at. I have read this answer - the camera (Canon 40D in case that matters) mounts fine using gvfs. I can see the photos in Nautilus, or in the terminal (in /run/user/username/gvfs/... ) and I can copy a few photos, but not many. Using the terminal or Nautilus the process hangs until the camera goes to sleep. Digikam fails to copy any at all, as does Rapid Photo Downloader. Shotwell did manage it in the end, but that is very much a work around for me. I have disabled thumbnail generation by nautilus. Load average stays about 1 while this is happening, while CPU usage is half idle, half wait (and a little user/sys for other programs). None of the programs at the top of the cpu list in top are related to copying photos. There is not much in the logs - from /var/log/syslog Dec 2 16:20:52 mishtop dbus[945]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper) Dec 2 16:20:52 mishtop dbus[945]: [system] Successfully activated service 'org.freedesktop.UDisks' Dec 2 16:21:24 mishtop kernel: [ 2297.180130] usb 2-2: new high-speed USB device number 4 using ehci_hcd Dec 2 16:21:24 mishtop kernel: [ 2297.314272] usb 2-2: New USB device found, idVendor=04a9, idProduct=3146 Dec 2 16:21:24 mishtop kernel: [ 2297.314278] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Dec 2 16:21:24 mishtop kernel: [ 2297.314283] usb 2-2: Product: Canon Digital Camera Dec 2 16:21:24 mishtop kernel: [ 2297.314287] usb 2-2: Manufacturer: Canon Inc. Dec 2 16:21:24 mishtop mtp-probe: checking bus 2, device 4: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2" Dec 2 16:21:24 mishtop mtp-probe: bus: 2, device: 4 was not an MTP device This problem has only started recently and I've had all the hardware for ages. I have also recently upgraded to 12.10, though I'm not sure if the problem started when I upgraded or after the upgrade. I also note this similar question but it is currently unanswered and I'm providing more detail

    Read the article

  • USB Ports In Wrong Mode, How To Use usbmodeswitch?

    - by user86872
    I haven't had access to my USB ports as media devices for a couple days now. I've been reading and researching everything I can find but I can't find a good guide for usbmodeswtich or usbms that I can decipher. The USB's are fine for power, but won't support my android phone as a media device, which is killing me because I use adb everyday, and won't support my plug and play mouse any longer. Not sure what caused the switch, though I think it may be related to the suspend issue I've read about, but the solutions in those threads I read also didn't work. Below is my system information and details. System: Ubuntu 12.04, 64-bit, Dedicated Machine Machine: HP-Pavillion g6 notebook, AMD A6 Quad Core Processor USBs used for: Cooling dock, Android Debug Bridge, Wireless Mouse Attempted Mod Probe, udev restart, unable to attempt lsusb due to my own lack of knowledge. :) Last Attempt Readout: ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo modprobe -r usbhid && sleep 5 && sudo modprobe usbhid ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo modprobe -r usb-storage ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo modprobe usb-storage ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo restart udev udev start/running, process 2624 ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0461:4de7 Primax Electronics, Ltd webcam Any help would be greatly appreciated!

    Read the article

  • Ethernet Connection Unavailable

    - by fabikw
    I'm running Ubuntu Server 12.04 on a laptop with an Intel NIC (driver e1000e). When I connect the ethernet port to the internet (college network, DHCP) it works out of the box. Now I'm trying to connect it to a networked USRP (if you want to know what it is). A friend of mine managed to do this in his laptop (running regular Ubuntu 12.04) just by setting up a new Wired connection in the Network Manager with appropriate addresses. However, when I do the same, no wired connections are available. The output of nmcli -p dev is =========================================== Status of devices =========================================== DEVICE TYPE STATE ------------------------------------------- wlan0 802-11-wireless connected eth0 802-3-ethernet unavailable but the cable is connected to the device and the device is powered up. Any idea how to solve this? UPDATE: After stopping the network-manager service, setting up the connection manually and starting the service again, it now detects the ethernet connection. However, the device still can't receive data and doesn't answer to pings. UPDATE 2: As suggested I tried using a cross over cable but the result is exactly the same. However, I found out that connecting the device to the dock (as opposed to directly to the laptop) works fine. I know that the ethernet port in the laptop works fine, because connecting to the network through it works. Is it possible that the port in the laptop doesn't support Gb Ethernet (because that's what the device requires) but the one in the dock does?

    Read the article

  • Kindle App for WP7 arrives

    - by dotgeek
    If you had asked me if I was interested in owning a Kindle device, then my response a couple months back would have been a flat out no back then. So what has changed between now on then you might be asking me then? I would have to say watching my wife enjoy the many books in digital form has peeked my interest to start with now. Was that enough for me to buy a Kindle though? Not just yet, but that is where the Windows Phone 7 comes in for me once again. It’s no secret that I’ve wanted this device and yes it does have a number of Apps that I think I’ll really enjoy. The latest must have App for me, will most certainly be the Kindle App for Windows Phone 7, released from Amazon today. I’ve already started playing around with the PC version of Kindle software and I’m looking at purchasing any future books in digital form now. So it’s a given once I have a Windows Phone 7 device, that I’ll be enjoying some of my favorite books, while I’m on the go I think and via this App. Tonight I actually had a chance to check out the WP7 Kindle App on a friends device and I was really pleased with how it looked and performed. Now if the planets could only manage to lineup for me and allow Verizon and Microsoft to come to terms on the releasing of WP7 CDMA devices, I just might be able to really enjoy some of this on my own. Do I rule out ever having an actual Kindle device? Not at all, but I do plan on having the WP7 device well before that day ever comes though.

    Read the article

  • USB flash module giving errors

    - by vshenoy
    Hi, I have a SATA USB flash module which was earlier running a 2.4 linux kernel (2.4.36.6) and on which now I am trying to install ubuntu server 10.04.1 LTS. I have two such USB flash modules and on one of them the installation process itself giving these errors: sd 4:0:0:0 [sda] Device not ready sd 4:0:0:0 [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 4:0:0:0 [sda] Sense Key : Not Ready [current] sd 4:0:0:0 [sda] Add. Sense: Medium not present sd 4:0:0:0 [sda] CDB: Write(10): 2a 00 00 05 48 02 00 00 04 00 end_request: I/O error, dev sda, sector 46114 usb 1-1: reset high speed USB device using ehci_hcd and address 2 Buffer I/O error on device sda1, logical block 172033 lost page write due to I/O error on sda1 Buffer I/O error on device sda1, logical block 172034 lost page write due to I/O error on sda1 on the other the installation is successful, but after a day or two of running the machine hangs because of kernel spewing these messages: Remounting filesystem read-only EXT2-fs error (device sda1): read_block_bitmap: Cannot read block [bitmap - block_group = 105, block_bitmap = 860161] EXT2-fs error (device sda1): ext2_get_inode: unable to read inode block - inode=13083, block=24683 ext2_free_inode: bit already cleared for inode 83966 and the machine needs to be hard rebooted. On both the systems SCSI emulation with usb_storage driver is being used to detect the module. Here is the output of /proc/scsi/scsi on 2.4: # cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: TS Model: UFM Rev: 1100 Type: Direct-Access ANSI SCSI revision: 02 and on 2.6: # cat /proc/scsi/scsi Attached devices: Host: scsi6 Channel: 00 Id: 00 Lun: 00 Vendor: TS Model: UFM Rev: 1100 Type: Direct-Access ANSI SCSI revision: 00 i.e. only 'ANSI SCSI revision:' is shown as different, although I am not sure if this can cause any problem. Really appreciate if someone can point as to how to debug this issue or any mailing list where I can further ask questions about this.

    Read the article

  • I can't hear any sounds on ubuntu 11.10 on Dell inspiron N5010

    - by Ahmed
    I have a problem that I can't hear any sounds and I don't know where to start. I did the following : lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) Subsystem: Dell Device 0447 Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at fbf00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel -- 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Dell Device 0447 Flags: bus master, fast devsel, latency 0, IRQ 49 Memory at fbe40000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel And It seems that I have 2 soundcards. Is that normal ?? I also did this: aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 Also on the sound setting GUI. I have 2 hardware profiles for sound cards but none of them works when I test the speakers. Where should I start searching ?

    Read the article

  • How can I fix my xvinfo?

    - by YumYumYum
    How can i fix my X server/driver? $ xvinfo X-Video Extension version 2.2 screen #0 no adaptors present Additional info: $ uname -a Linux desktop 2.6.32-33-generic #70-Ubuntu SMP Thu Jul 7 21:13:52 UTC 2011 x86_64 GNU/Linux $ lspci 00:00.0 Host bridge: Intel Corporation Device 0100 (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Sandy Bridge Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation Device 1503 (rev 05) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 4 (rev b5) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation Device 1c4a (rev 05) 00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) 01:00.0 PCI bridge: Integrated Technology Express, Inc. Device 8892 (rev 10) 04:00.0 USB Controller: NEC Corporation Device 0194 (rev 04) Follow up: It seems in 64-bit its a mess doing existing approach. Therefore, after upgrading to 12.04 64-bit this problems in same hardware is resolved (of-course, i have now other drivers problem)

    Read the article

  • XNA 4: RenderTarget2D textures getting transparent on fullscreen

    - by Shashwat
    I'm generating a Texture2D object using RenderTarget2D as in the following code public static Texture2D GetTextTexture(string text, Vector2 position, SpriteFont font, Color foreColor, Color backColor, Texture2D background=null) { int width = (int)font.MeasureString(text).X; int height = (int)font.MeasureString(text).Y; GraphicsDevice device = Settings.game.GraphicsDevice; SpriteBatch spriteBatch = Settings.game.spriteBatch; RenderTarget2D renderTarget = new RenderTarget2D(device, width, height, false, SurfaceFormat.Color, DepthFormat.Depth24Stencil8, device.PresentationParameters.MultiSampleCount, RenderTargetUsage.DiscardContents); device.SetRenderTarget(renderTarget); device.Clear(backColor); spriteBatch.Begin(SpriteSortMode.Immediate, BlendState.Opaque); if (background != null) spriteBatch.Draw(background, new Rectangle(0, 0, 70, 70), Color.White); spriteBatch.End(); spriteBatch.Begin(); spriteBatch.DrawString(font, text, position, foreColor, 0, new Vector2(0), 0.8f, SpriteEffects.None, 0); spriteBatch.End(); device.SetRenderTarget(null); ResetGraphicsDeviceSettings(); return (Texture2D)renderTarget; } It's working all fine. But when I ToggleFullScreen() (and vice-versa), the previous textures are getting transparent. However, the new textures after that are being generated correctly. What can be the reason for this?

    Read the article

  • USB ports not working on Xubuntu 12.04 LTS

    - by Zchpyvr
    Basically, my USB ports on my IBM Thinkpad T43 have stopped working most of the time. Sometimes, they mount and appear in Nautilus, but other times, they aren't recognized. The timeline of events on this laptop for the past few months: Started having problems after using a USB port hub. The port would sometimes work but would be fixed with the occasional reboot. Re-partitioned/Expanded my Xubuntu partition (I have a Windows XP/Xubuntu dual boot). Now the majority of the time, the USB fails to recognize devices. In addition, the few times they are recognized, the device may suddenly disconnect. Things I've noticed: The devices still receive power from my computer (I can charge my ipod..etc..) I can't understand dmesg outputs. I don't know if lsusb is telling me anything useful. My dmesg output is here: http://pastebin.com/KdNxHcFC Things start to get weird at the bottom of the file. And my lsusb is: $ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

    Read the article

  • DirectX: Render to a screen buffer without using a render target

    - by knight666
    Hello, I'm writing an open source 2D game engine, and I want to support as many devices and platforms as possible. I currently only have Windows Mobile though. I'm rendering using DirectX Mobile, with DirectDraw as a fallback path. However, I've run into a bit of trouble. It seems that while the reference driver supports createRenderTarget, many many many physical devices do not. I need some way to render to the screen without using a render target, because I render sprites using textured quads, but I also need to be able to draw individual pixels. This is how I do it right now: // save old values if (Error::Failed(m_D3DDevice->GetRenderTarget(&m_D3DOldTarget))) { ERROR_EXPLAIN("Could not retrieve backbuffer."); return false; } // clear render surface if (Error::Failed(m_D3DDevice->SetRenderTarget(m_D3DRenderSurface, NULL))) { ERROR_EXPLAIN("Could not set render target to render texture."); return false; } if (Error::Failed (m_D3DDevice->Clear( 0, NULL, // target rectangle D3DMCLEAR_TARGET, D3DMCOLOR_XRGB(0, 0, 0), // clear color 1.0f, 0 ) ) ) { ERROR_EXPLAIN("Failed to clear render texture."); return false; } D3DMLOCKED_RECT render_rect; if (Error::Failed(m_D3DRenderSurface->LockRect(&render_rect, NULL, NULL))) { ERROR_EXPLAIN("Failed to lock render surface pixels."); } else { m_D3DBackSurf->SetBuffer((Pixel*)render_rect.pBits); m_D3DRenderSurface->UnlockRect(); } // begin scene if (Error::Failed(m_D3DDevice->BeginScene())) { ERROR_EXPLAIN("Failed to start rendering."); return false; } // ===================== // example rendering // ===================== // some other stuff, but the most important part of rendering a sprite: device->SetTexture(0, m_Texture)); device->SetStreamSource(0, m_VertexBuffer, sizeof(Vertex)); device->DrawPrimitive(D3DMPT_TRIANGLELIST, 0, 2); // plotting a pixel Surface* target = (Surface*)Device::GetRenderMethod()->GetRenderTarget(); buffer = target->GetBuffer(); buffer[somepixel] = MAKECOLOR(255, 0, 0); // end scene if (Error::Failed(device->EndScene())) { ERROR_EXPLAIN("Failed to end scene."); return false; } // clear screen if (Error::Failed(device->SetRenderTarget(m_D3DOldTarget, NULL))) { ERROR_EXPLAIN("Couldn't set render target to backbuffer."); return false; } if (Error::Failed(device->GetBackBuffer ( 0, D3DMBACKBUFFER_TYPE_MONO, &m_D3DBack ) ) ) { ERROR_EXPLAIN("Couldn't retrieve backbuffer."); return false; } RECT dest = { 0, 0, Device::GetWidth(), Device::GetHeight() }; if (Error::Failed( device->StretchRect ( m_D3DRenderSurface, NULL, m_D3DBack, &dest, D3DMTEXF_NONE ) ) ) { ERROR_EXPLAIN("Failed to stretch render texture to backbuffer."); return false; } if (Error::Failed(device->Present(NULL, NULL, NULL, NULL))) { ERROR_EXPLAIN("Failed to present device."); return false; } I'm looking for a way to do the same thing (render sprites using hardware acceleration and plot pixels on a buffer) without using a render target. Thanks in advance.

    Read the article

  • connection between two android phones

    - by user1770346
    I m not able to connect my android device to other device(either android or non-android)via bluetooth.After detecting the devices from my android phone,i m not able to connect it to selected device from the list.The main problem is it not showing connectivity conformation message in selected device from list.How can i recover from this problem. please help me.Thanks My code for searching device is:(BluetoothSearchActivity.java) public class BluetoothSearchActivity extends Activity { ArrayAdapter<String> btArrayAdapter; BluetoothAdapter mBluetoothAdapter; TextView stateBluetooth; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); ImageView BluetoothSearchImageView=new ImageView(this); BluetoothSearchImageView.setImageResource(R.drawable.inner1); setContentView(BluetoothSearchImageView); setContentView(R.layout.activity_bluetooth_search); mBluetoothAdapter=BluetoothAdapter.getDefaultAdapter(); ListView listDevicesFound=(ListView) findViewById(R.id.myList); btArrayAdapter=new ArrayAdapter<String> (BluetoothSearchActivity.this,android.R.layout.simple_list_item_1); listDevicesFound.setAdapter(btArrayAdapter); registerReceiver(ActionFoundReceiver,new IntentFilter(BluetoothDevice.ACTION_FOUND)); btArrayAdapter.clear(); mBluetoothAdapter.startDiscovery(); listDevicesFound.setOnItemClickListener(new OnItemClickListener() { public void onItemClick(AdapterView<?> parent,View view,int position,long id) { Intent i6=new Intent(getApplicationContext(),AcceptThread.class); startActivity(i6); } }); } private final BroadcastReceiver ActionFoundReceiver=new BroadcastReceiver() { @Override public void onReceive(Context context, Intent intent) { // TODO Auto-generated method stub String action=intent.getAction(); if(BluetoothDevice.ACTION_FOUND.equals(action)) { BluetoothDevice device=intent.getParcelableExtra(BluetoothDevice.EXTRA_DEVICE); btArrayAdapter.add(device.getName()+"\n"+device.getAddress()); btArrayAdapter.notifyDataSetChanged(); Log.d("BluetoothSearchActivity",device.getName()+"\n"+device.getAddress()); } } }; @Override protected void onDestroy() { super.onDestroy(); unregisterReceiver(ActionFoundReceiver); } @Override public boolean onCreateOptionsMenu(Menu menu) { getMenuInflater().inflate(R.menu.activity_bluetooth_search, menu); return true; } } and my connectivity code is:(AcceptThread.java) class ConnectThread extends Thread { private static final UUID MY_UUID=UUID.fromString("fa87c0d0-afac-11de-8a39-0800200c9a66"); private static final String ConnectThread = null; BluetoothSocket mSocket; BluetoothDevice mDevice; BluetoothAdapter mBluetoothAdapter; public ConnectThread(BluetoothDevice device) { BluetoothSocket temp=null; mDevice=device; try{ temp=mDevice.createRfcommSocketToServiceRecord(MY_UUID); }catch(IOException e) { } mSocket=temp; } public void run() { mBluetoothAdapter.cancelDiscovery(); try{ Log.i(ConnectThread,"starting to connect"); mSocket.connect(); }catch(IOException connectException) { Log.e(ConnectThread,"connection Failed"); try{ mSocket.close(); }catch(IOException closeException){ } return; } } public void cancel() { try{ mSocket.close(); }catch(IOException e) { } } } public class AcceptThread extends Thread{ private static final String NAME="BluetoothAcceptThread"; private static final UUID MY_UUID=UUID.fromString("fa87c0d0-afac-11de-8a39-0800200c9a66"); BluetoothServerSocket mServerSocket; BluetoothAdapter mBluetoothAdapter; public AcceptThread() { BluetoothServerSocket temp=null; try{ temp=mBluetoothAdapter.listenUsingRfcommWithServiceRecord(NAME,MY_UUID); }catch(IOException e){ } mServerSocket=temp; } public void run() { BluetoothSocket socket=null; while(true) { try{ socket=mServerSocket.accept(); }catch(IOException e) { break; } if(socket!=null) { try { mServerSocket.close(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } break; } } } public void cancel() { try{ mServerSocket.close(); }catch(IOException e) { } } }

    Read the article

  • iPhone app memory leak with UIImage animation? Problem testing on device

    - by user157733
    I have an animation which works fine in the simulator but crashes on the device. I am getting the following error... Program received signal: “0”. The Debugger has exited due to signal 10 (SIGBUS) A bit of investigating suggests that the UIImages are not getting released and I have a memory leak. I am new to this so can someone tell me if this is the likely cause? If you could also tell me how to solve it then that would be amazing. The images are 480px x 480px and about 25kb each. My code is below... NSArray *rainImages = [NSArray arrayWithObjects: [UIImage imageNamed:@"rain-loop0001.png"], [UIImage imageNamed:@"rain-loop0002.png"], [UIImage imageNamed:@"rain-loop0003.png"], [UIImage imageNamed:@"rain-loop0004.png"], [UIImage imageNamed:@"rain-loop0005.png"], [UIImage imageNamed:@"rain-loop0006.png"], //more looping images [UIImage imageNamed:@"rain-loop0045.png"], [UIImage imageNamed:@"rain-loop0046.png"], [UIImage imageNamed:@"rain-loop0047.png"], [UIImage imageNamed:@"rain-loop0048.png"], [UIImage imageNamed:@"rain-loop0049.png"], [UIImage imageNamed:@"rain-loop0050.png"], nil]; rainImage.animationImages = rainImages; rainImage.animationDuration = 4.15/2; rainImage.animationRepeatCount = 0; [rainImage startAnimating]; [rainImage release]; Thanks

    Read the article

  • How do you save images to a Blackberry device via HttpConnection?

    - by Kai
    My script fetches xml via httpConnection and saves to persistent store. No problems there. Then I loop through the saved data to compose a list of image url's to fetch via queue. Each of these requests calls the httpConnection thread as so ... public synchronized void run() { HttpConnection connection = (HttpConnection)Connector.open("http://www.somedomain.com/image1.jpg"); connection.setRequestMethod("GET"); String contentType = connection.getHeaderField("Content-type"); InputStream responseData = connection.openInputStream(); connection.close(); outputFinal(responseData, contentType); } public synchronized void outputFinal(InputStream result, String contentType) throws SAXException, ParserConfigurationException, IOException { if(contentType.startsWith("text/")) { // bunch of xml save code that works fine } else if(contentType.equals("image/png") || contentType.equals("image/jpeg") || contentType.equals("image/gif")) { // how to save images here? } else { //default } } What I can't find any good documentation on is how one would take the response data and save it to an image stored on the device. Maybe I just overlooked something very obvious. Any help is very appreciated. Thanks

    Read the article

  • How to do logout functionality in C# smart device application?

    - by Shailesh Jaiswal
    I am developng Smart device application in C#. It is a window application. In this application I am using Login form to authenticate the users. Only authenticated users can login into the system. In this application I am calling java web services which resides on another machine. I am passing mobile number & password from mu application's login form to the java web services. The java web services returns the userid after successful authentication. I made this userid static so that it can be used frequently with other web services. I using statc variables in this application so that they can be used at application level. After deploying the application I can see that emulator provides the close button with multiplicaton symbol. In this way I can close my form as well as application. But I want to provde one logout link in my application. Can I provide logout functionality in C# window application ? If yes, how to do that ? Please make sure that all the functions of .net framework does not work with .net compact framwork? Can you provide me the code or link through which can resolve the above issue ?

    Read the article

  • Why does DeviceIoControl throw error 21 (Device Not Ready) from C# when the equivalent in C works fine?

    - by Ragesh
    I'm trying to send an IOCTL_SERVICE_REFRESH command to the GPS Intermediate Driver service using C# like this: handle = CreateFile("GPD0:", GENERIC_READ, FILE_SHARE_READ | FILE_SHARE_WRITE, IntPtr.Zero, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, IntPtr.Zero); if (handle.ToInt32() == INVALID_HANDLE_VALUE) { rc = Marshal.GetLastWin32Error(); return rc; } int numBytesReturned = 0; rc = DeviceIoControl( handle, IOCTL_SERVICE_REFRESH, null, 0, null, 0, ref numBytesReturned, IntPtr.Zero); int error = Marshal.GetLastWin32Error(); GetLastWin32Error always gives me error 21 (device not ready). However, the equivalent call when made from C++ works fine: HANDLE hGPS = CreateFile(L"GPD0:", GENERIC_READ, FILE_SHARE_READ | FILE_SHARE_WRITE, 0, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, 0); if (hGPS != INVALID_HANDLE_VALUE) { BOOL ret = DeviceIoControl(hGPS,IOCTL_SERVICE_REFRESH,0,0,0,0,0,0); DWORD err = GetLastError(); } I suspected a problem with the PInvoke signatures, but I can't seem to find anything wrong here: [DllImport("coredll.dll", EntryPoint = "DeviceIoControl", SetLastError = true)] public static extern int DeviceIoControl( IntPtr hDevice, uint dwIoControlCode, byte[] lpInBuffer, int nInBufferSize, byte[] lpOutBuffer, int nOutBufferSize, ref int lpBytesReturned, IntPtr lpOverlapped); [DllImport("coredll.dll", SetLastError = true)] public static extern IntPtr CreateFile( String lpFileName, uint dwDesiredAccess, uint dwShareMode, IntPtr attr, uint dwCreationDisposition, uint dwFlagsAndAttributes, IntPtr hTemplateFile); What am I missing here?

    Read the article

  • How to stop calling the Activity again when device orientation is changed??

    - by user1460323
    My app uses Barcode Scanner. I want to launch the scanner when I open the app so I have it in the onCreate method. The problem is that if I have it like that, when I turn the device it calls again onCreate and calls another scanner. Also I have the first activity that calls the scanner. it has a menu so if he user presses back, it goes to that menu. If I turn the screen on that menu, it goes to barcode scanner again. To solve it I have a flag that indicates if it is the first time I call the scanner, if it's not I don't call it again. Now the problem is that if I go out of the app and go in again it doesn't go to the scanner, it goes to the menu, becasuse is not the first time I call it. Any ideas?? Is there a way to change the flag when I go out of my main activity or any other solution?? My code. private static boolean first = true; public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); integrator = new IntentIntegrator(this); if (first) { first = false; integrator.initiateScan(); } }

    Read the article

  • Built-in card-reader doesn't work. HP Compaq nx6325 notebook

    - by user10940
    I have a HP-Compaq nx6325 notebook with an built-in card-reader (SD, MS/Pro, MMC, SM, XD) and the ubuntu (10.10.) don't see it. I've tried to install it manually, with this steps (and with this tifmxx driver), but doesn't work. The compile log: $ echo /home/tvera/downloads/cr_install /home/tvera/downloads/cr_install $ make -C /lib/modules/2.6.35-25-generic/build M=/home/tvera/downloads/cr_install make[1]: Entering directory `/usr/src/linux-headers-2.6.35-25-generic' CC [M] /home/tvera/downloads/cr_install/tifm_core.o In file included from /home/tvera/downloads/cr_install/tifm_core.c:12: /home/tvera/downloads/cr_install/linux/tifm.h:128: error: field ‘cdev’ has incomplete type /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_uevent’: /home/tvera/downloads/cr_install/tifm_core.c:69: warning: passing argument 1 of ‘add_uevent_var’ from incompatible pointer type include/linux/kobject.h:244: note: expected ‘struct kobj_uevent_env *’ but argument is of type ‘char **’ /home/tvera/downloads/cr_install/tifm_core.c:69: warning: passing argument 2 of ‘add_uevent_var’ makes pointer from integer without a cast include/linux/kobject.h:244: note: expected ‘const char *’ but argument is of type ‘int’ /home/tvera/downloads/cr_install/tifm_core.c: At top level: /home/tvera/downloads/cr_install/tifm_core.c:161: warning: initialization from incompatible pointer type /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_free’: /home/tvera/downloads/cr_install/tifm_core.c:170: warning: type defaults to ‘int’ in declaration of ‘__mptr’ /home/tvera/downloads/cr_install/tifm_core.c:170: warning: initialization from incompatible pointer type /home/tvera/downloads/cr_install/tifm_core.c: At top level: /home/tvera/downloads/cr_install/tifm_core.c:177: error: unknown field ‘release’ specified in initializer /home/tvera/downloads/cr_install/tifm_core.c:178: warning: initialization from incompatible pointer type /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_alloc_adapter’: /home/tvera/downloads/cr_install/tifm_core.c:190: error: implicit declaration of function ‘class_device_initialize’ /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_add_adapter’: /home/tvera/downloads/cr_install/tifm_core.c:211: error: ‘BUS_ID_SIZE’ undeclared (first use in this function) /home/tvera/downloads/cr_install/tifm_core.c:211: error: (Each undeclared identifier is reported only once /home/tvera/downloads/cr_install/tifm_core.c:211: error: for each function it appears in.) /home/tvera/downloads/cr_install/tifm_core.c:212: error: implicit declaration of function ‘class_device_add’ /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_remove_adapter’: /home/tvera/downloads/cr_install/tifm_core.c:237: error: implicit declaration of function ‘class_device_del’ /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_free_adapter’: /home/tvera/downloads/cr_install/tifm_core.c:243: error: implicit declaration of function ‘class_device_put’ /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_alloc_device’: /home/tvera/downloads/cr_install/tifm_core.c:275: error: ‘struct device’ has no member named ‘bus_id’ /home/tvera/downloads/cr_install/tifm_core.c:275: error: ‘BUS_ID_SIZE’ undeclared (first use in this function) make[2]: *** [/home/tvera/downloads/cr_install/tifm_core.o] Error 1 make[1]: *** [_module_/home/tvera/downloads/cr_install] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-25-generic' make: *** [all] Error 2 The output of lsusb: Bus 001 Device 005: ID 05e3:0702 Genesys Logic, Inc. USB 2.0 IDE Adapter Bus 003 Device 003: ID 0458:003a KYE Systems Corp. (Mouse Systems) NetScroll+ Mini Traveler Bus 003 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    Read the article

  • How to Get Serial Number or ID of Android Emulator After it Runs?

    - by papalagi
    If I run several emulators with -no-window option in one machine. The command "adb devices" shows: List of devices attached emulator-5554 device emulator-5556 device emulator-5558 device ... However, according to this output, I can't tell the difference between each emulator device at all. I need to know which emulator runs on what AVD, then I can install APKs or send commands to the emulator. How can I recognize each emulator device or get the serial number of emulator after it runs?

    Read the article

  • USB drives not recognized all of a sudden (module usb_storage not loading)

    - by Siddharth
    I am very close to the solution, just need to know how to get usb-storage to load I have tried most of the advice on askubuntu and other sites, usb_storage enable to fdisk -l. But I am unable to find steps to get it working again. sudo lsusb results Bus.... skipped 4 lines Bus 004 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 005: ID 8564:1000 sudo dmseg | tail reports [ 69.567948] usb 1-4: USB disconnect, device number 4 [ 74.084041] usb 1-6: new high-speed USB device number 5 using ehci_hcd [ 74.240484] Initializing USB Mass Storage driver... [ 74.256033] scsi5 : usb-storage 1-6:1.0 [ 74.256145] usbcore: registered new interface driver usb-storage [ 74.256147] USB Mass Storage support registered. [ 74.257290] usbcore: deregistering interface driver usb-storage fdisk -l reports Device Boot Start End Blocks Id System /dev/sda1 * 2048 972656639 486327296 83 Linux /dev/sda2 972658686 976771071 2056193 5 Extended /dev/sda5 972658688 976771071 2056192 82 Linux swap / Solaris I think I need steps to install and get usb_storage module working. Edit : I tried sudo modprobe -v usb-storage reports sudo modprobe -v usb-storage insmod /lib/modules/3.2.0-48-generic-pae/kernel/drivers/usb/storage/usb-storage.ko Edit : jsiddharth@siddharth-desktop:~$ sudo udevadm monitor --udev monitor will print the received events for: UDEV - the event which udev sends out after rule processing UDEV [4757.144372] add /module/usb_storage (module) UDEV [4757.146558] remove /module/usb_storage (module) UDEV [4757.148707] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6 (usb) UDEV [4757.149699] add /bus/usb/drivers/usb-storage (drivers) UDEV [4757.151214] remove /bus/usb/drivers/usb-storage (drivers) UDEV [4757.156873] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0 (usb) UDEV [4757.160903] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) UDEV [4757.164672] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165163] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165440] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) Narrowing down more : Seems like I need usb_storage to load as a module jsiddharth@siddharth-desktop:~$ lsmod | grep usb usbserial 37201 0 usbhid 41937 0 hid 77428 1 usbhid Still no usb driver mounted. Nor does a device show up in /dev. Any step by step process to debug and fix this will be really helpful.

    Read the article

  • USB drives not recognized all of a sudden (usb_storage not loaded lsmod does not report usb_storage)

    - by Siddharth
    I have tried most of the advice on askubuntu and other sites, usb_storage enable to fdisk -l. But I am unable to find steps to get it working again. sudo lsusb results Bus.... skipped 4 lines Bus 004 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 005: ID 8564:1000 sudo dmseg | tail reports [ 69.567948] usb 1-4: USB disconnect, device number 4 [ 74.084041] usb 1-6: new high-speed USB device number 5 using ehci_hcd [ 74.240484] Initializing USB Mass Storage driver... [ 74.256033] scsi5 : usb-storage 1-6:1.0 [ 74.256145] usbcore: registered new interface driver usb-storage [ 74.256147] USB Mass Storage support registered. [ 74.257290] usbcore: deregistering interface driver usb-storage fdisk -l reports Device Boot Start End Blocks Id System /dev/sda1 * 2048 972656639 486327296 83 Linux /dev/sda2 972658686 976771071 2056193 5 Extended /dev/sda5 972658688 976771071 2056192 82 Linux swap / Solaris I think I need steps to install and get usb_storage module working. Edit : I tried sudo modprobe -v usb-storage reports sudo modprobe -v usb-storage insmod /lib/modules/3.2.0-48-generic-pae/kernel/drivers/usb/storage/usb-storage.ko Edit : jsiddharth@siddharth-desktop:~$ sudo udevadm monitor --udev monitor will print the received events for: UDEV - the event which udev sends out after rule processing UDEV [4757.144372] add /module/usb_storage (module) UDEV [4757.146558] remove /module/usb_storage (module) UDEV [4757.148707] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6 (usb) UDEV [4757.149699] add /bus/usb/drivers/usb-storage (drivers) UDEV [4757.151214] remove /bus/usb/drivers/usb-storage (drivers) UDEV [4757.156873] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0 (usb) UDEV [4757.160903] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) UDEV [4757.164672] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165163] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165440] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) Narrowing down more : Seems like I need usb_storage to load as a module jsiddharth@siddharth-desktop:~$ lsmod | grep usb usbserial 37201 0 usbhid 41937 0 hid 77428 1 usbhid Still no usb driver mounted. Nor does a device show up in /dev. Any step by step process to debug and fix this will be really helpful.

    Read the article

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >