Search Results

Search found 3775 results on 151 pages for 'higher education'.

Page 71/151 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

• How much RAM required by Varnish?

  - by Gobind Singh Deo

  Hi, I'm using Apache for serving static files. Apache2 require too much RAM. I want to reduce the RAM usage. I don't have experience with Varnish. It's said to be faster. I don't know how Varnish works. So, How much RAM needed for running Apache2+Varnish? Will Apache2+Varnish have higher RAM usage than Apache2 without Varnish? Thanks.

  Read the article

• core temperature vs CPU temperature

  - by Karl Nicoll

  I have recently installed a new heat sink & fan combination on my Core 2 Quad since my CPU was hitting about 70C under load. This has managed reduce temperatures while running Prime95 to about 54C, which I'm taking as a win (this is ~30 minutes after fitting). I'm a little confused though. The temperature readings given above are for CORE temperatures, but HWMonitor is showing a 5th "CPU" temperature (4 temperatures being the individual core temps) which is showing 21C idle, when idle temperatures for the cores vary between 37C and 42C. I guess there are two questions here: Are my CPU/Core temperatures decent, and is it safe to overclock when these are stock clock temperatures? I gather that the maximum safe operating temperature for a C2Q is ~70C, so which temperature should I measure against, the core temperatures (which are higher), or the CPU temperature reading?

  Read the article

• Installing OpenSSL that supports SNI along with previous version of OpenSSL

  - by gh0sT

  So I learned that to host multiple HTTPS websites on the same IP address you need an OpenSSL version that supports SNI (0.9.8f and higher). My RHEL5 box currently has 0.9.8e and Apache version httpd-2.2.26-2.el5. According to a same question here it's not a good idea to replace the original version of OpenSSL and instead to have a parallel installation. It however doesn't explicitly mention how to achieve this. So my questions are: How do I have an alternate installation of OpenSSL without breaking the system? How do I make Apache to use this version of OpenSSL and not the original one? A detailed guide would be extremely helpful.

  Read the article

• Why are 32-bit application pools more efficient in IIS? [closed]

  - by mhenry1384

  I've been running load tests with two different ASP.NET web applications in IIS. The tests are run with 5,10,25, and 250 user agents. Tested on a box with 8 GB RAM, Windows 7 Ultimate x64. The same box running both IIS and the load test project. I did many runs, and the data is very consistent. For every load, I see a lower "Avg. Page Time (sec)" and a lower "Avg. Response Time (sec)" if I have "Enable 32-bit Applications" set to True in the Application Pools. The difference gets more pronounced the higher the load. At very high loads, the web applications start to throw errors (503) if the application pools are 64-bit, but they can can keep up if set to 32-bit. Why are 32-bit app pools so much more efficient? Why isn't the default for application pools 32-bit?

  Read the article

• DD-WRT Connection Leak

  - by Nerdfest

  I have DD-WRT installed on a WRT54G v1.1, and a few of the features seem to cause connections to leak. I've configured it for 1024 connections with TCP/UDP timeouts of 180/30. I've tried higher values as well. Anyway, if I use the Bandwidth tab to monitor the bandwidth usage, the number of connections to my workstation reaches about 450. Is this normal? If not, any idea how to get the connections to either not be created, or to drop much faster?

  Read the article

• Intel Core i7 clockspeeds

  - by skiwi

  I've got an Intel i7 3770 CPU and am generally quite happy about it. However when I am just browsing around without programs running in background it seems to underclock itself quite a lot. This is not a real issue, however there seems to be a small hiccup (0.1s maybe) when it clocks itself higher again. Does anyone have a similar issue? Can I change the thresholds that are being used to change the clocks? I absolutely like that it underclocks the CPU whenever I am not around, but it shouldn't start to annoy me. It might also be related to Windows 8.1, but I am not sure about that, just saying that it's a possibility. I ran LatencyMon as suggested and got this (worrying?) result:

  Read the article

• Reputable TabletPC vendors

  - by snorfys

  I'm developing software for tablet pcs and so far I've used some lenovo's (x41), some toshiba's (portege m200) and some gateways (M275). Granted: the machines we've gotten have predominantly been refurbs, but they're failing 80-90% of the time. Part of the reason that they're failing is users inevitably dropping them, so I'm looking at potentially some rugged tablet pcs. The problem that I'm running into is that Current tablet pcs are high spec (much higher than I'm looking for at least) The rugged tablet manufacturer space seems to be filled with lots of small companies that I don't trust yet. I'm looking for tablet PCs (keyboard or no) that can support: XP tpc (optional win 7) single core 1.5-2ghz 1gb ram wifi optional gsm optional gps very optional vehicle docking solutions The budget I've got is tight (but slightly flexible - So are there any reputable tablet pc vendors out there that can do this.

  Read the article

• Link rate between EMC DAE and HBA

  - by Johan Christensson

  I have a EMC DAE (KTN-STL4) drive cage directly connecconnected to a HP Proliant server using a QLogic QLE2560 HBA. I'm using copper cable between the HBA card and the DAE. On the controller card in the DAE there is a label that states "4Gb". I'm guessing that this means 4Gbit/s. But if I set the HBA card to "Auto speed" it negotiate 2Gbit/s, and if I hard set it to 4Gbit/s I end up with no link. Why is this? Isn't the DAE controller card capebel of link speed higher then 2Gbit/s or is it the copper cable that limits the speed, or is it the interface used between the DAE and Qlogic HBA that is the problem? I have been browsing for HSSDC-FC converters and they always seems to på rated at ~2Gbit/s. If this is the limit, why does it say 4Gb on the controller cards in the DAE?

  Read the article

• How can I determine which processes are using up the most CPU?

  - by Rob

  05:54:17 up 6 days, 9:54, 1 user, load average: 15.70, 8.04, 4.56 Load average is a LOT higher than it should be. It was HALF of that a moment ago, I used ps aux to see which processes were using a lot of cpu, and the httpd was using a TON. It had several processes running with 0.9 each. So I restarted the httpd, and now those processes are gone, but the load averages have doubled. So my question is: is there a way I can list the processes that are consuming the most cpu?

  Read the article

• what is acceptable datastore latency on VMware ESXi host?

  - by BeowulfNode42

  Looking at our performance figures on our existing VMware ESXi 4.1 host at the Datastore/Real-time performance data Write Latency Avg 14 ms Max 41 ms Read Latency Avg 4.5 ms Max 12 ms People don't seem to be complaining too much about it being slow with those numbers. But how much higher could they get before people found it to be a problem? We are reviewing our head office systems due to running low on storage space, and are tossing up between buying a 2nd VM host with DAS or buying some sort of NAS for SMB file shares in the near term and maybe running VMs from it in the longer term. Currently we have just under 40 staff at head office with 9 smaller branches spread across the country. Head office is runnning in an MS RDS session based environment with linux ERP and mail systems. In total 22 VMs on a single host with DAS made from a RAID 10 made of 6x 15k SAS disks.

  Read the article

• 10/100 Network performing at 1.5 to 2.0 megabyte per second - is that below normal?

  - by burnt1ce

  This comes out to about 12 to 16 megabit/seond. I've read in forums that people are getting much higher speeds (ie: "40-60 Mb/s" http://forums.cnet.com/5208-7589_102-0.html?threadID=265967). I'm getting my benchmark by having a unmanged 5 port switch connected to a WRT54GS router connect. I'm sending a file from a computer connect to the WRT54GS to another computer that's connect to the unmanaged 5 port switch. Is the linkage of the switch causing this massive overhead? i doubt it. What could explain the slow down? electrical interference?

  Read the article

• New host, high load?

  - by dotancohen

  A few minutes ago I signed up at a new webhost. I have yet to move my sites over. Upon initial SSH connection, I checked the load and memory usage, they do seem rather higher than I would like: # uptime 12:06:51 up 71 days, 23:23, 1 user, load average: 9.02, 9.49, 9.45 # free total used free shared buffers cached Mem: 33014800 31927192 1087608 0 2384812 17729816 -/+ buffers/cache: 11812564 21202236 Swap: 16787916 8584 16779332 Is that a bit to packed? I'm only paying about $5 USD per month, so I don't expect <0.1 loads, but ~10 is worrisome. Is it not? Also, there is no /etc/issue file so I tried other methods to guess the OS: # uname -a Linux box358.bluehost.com 2.6.32-20120131.55.1.bh6.x86_64 #1 SMP Tue Jan 31 15:43:27 EST 2012 x86_64 x86_64 x86_64 GNU/Linux # which yum /usr/bin/yum # which apt-get # That looks like CentOS / RHEL 6.2 possibly?

  Read the article

• QoS / PBR Routing Questions

  - by Bernard

  I have a 50Mbs Satellite link and a 10Mbs Microwave link supplying a very remote location. Behind these links, I have a 6,400 seat network - with about 3,000 signed in at any one time. My goal is to send all of the Voip traffic (Google Chat, Magic Jack, Skype, Speakeasy, Vonage, Vonage PC, Yahoo) through the microwave link which has 100ms latency. The rest of the traffic can utilize any remaining bandwidth of the microwave link with excess being diverted to the higher latency (600ms) satellite connection. The problem I've had so far is that most automatic routing configurations weigh the bandwidth heavily for preference - and I'm only wanting latency considered. Additionally, I don't know if this can even be handled with the routing hardware I have at my disposal (Cisco 3640, 3745, & 3845). Any recommendations (or really good starting points) would be greatly appreciated.

  Read the article

• LVM2 vs MDADM performance

  - by archer

  I've used MDADM + LVM2 on many boxes for quite a while. MDADM was serving for both RAID0 and RAID1 arrays, while LVM2 where used for logical volumes on top of MDADM. Recently I've found that LVM2 could be used w/o MDADM (thus minus one layer, as the result - less overhead) for both mirroring and stripping. However, some guys claims that READ PERFORMANCE on LVM2 for mirrored array is not that fast as for LVM2 (linear) on top of MDADM (RAID1) as LVM2 does not read from 2+ devices at a time, but use 2nd and higher devices in case of 1st device failure. MDADM reads from 2 devices at a time (even in mirrored mode). Who could confirm that?

  Read the article

• Recovering database files from a corrupted VHD

  - by Apocalypse9

  We have a SQL server hosted on a virtual machine. Our hosting company updated/restarted the server and for some reason the virtual machines became unbootable. We've spoken to Microsoft and used a few higher level tools to attempt to recover the virtual machines but were unsuccessful. In browsing the file system the database folder doesn't even appear. I'm wondering if there are any lower level tools that might be able to find and copy the database files. As far as I know the physical hard drive is ok, so I'm hoping there may be some way to recover the files themselves even if the rest of the virtual machine file-system is a loss. Obviously we're in a bit of a bind, and any help/ suggestions are very much appreciated.

  Read the article

• Oracle Installation issue on Oracle Linux 6.4

  - by Pradhyoth

  I am trying to install Oracle 11g(11.2.0.1.0) on Oracle Linux 6.4(Remote Server). I get the following error(s) when Database Configuration Assistant is running ORA-01092: ORACLE instance terminated Disconnection forced ORA-48210: Relation Not Found Can someone help me regarding this errors, I cant seem to find what exactly that I have to do to solve this issue. I have done the same install on Oracle Linux 5.7 but never faced this issue before. The only problem while installing(which happens on 5.7 too) is that the required packages fail, but upon checking, it seems much higher versions are already installed. Also I cant do a yum update because the system seems to have connectivity issues with public-yum.oracle.com as I cant ping it(even though the IP Address gets resolved)

  Read the article

• Change sysout logging level for Weblogic

  - by Justin Voss

  When I run a local copy of Weblogic, I like to see the output in the console so that I can observe my app's logging messages. But, Weblogic spits out a lot of log messages I don't care about, like these: [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' 08-29-2010 01:02:21 INFO Getting a JNDI connection [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' 08-29-2010 01:02:21 INFO Connection Returned. Elapsed time to acquire=0ms. [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' 08-29-2010 01:02:21 INFO Getting a JNDI connection [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' 08-29-2010 01:02:21 INFO Connection Returned. Elapsed time to acquire=0ms. Can I configure Weblogic to not output those? I assume that I can change the logging level to something higher than INFO and that should fix it?

  Read the article

• What is Google Docs' SLA?

  - by Walter White

  Hi all, I am evaluating online storage and for me, that means either Amazon S3 or Google Docs. Amazon very clearly posts there reliability and SLA: http://aws.amazon.com/s3/#protecting Their rates are obviously higher than Google's, but it is really hard to compare without having an SLA. Does anyone know what Google's commitment is for reliability? Is it 99.99% for data, is there anyway to make that more durable? I have to ask too, wouldn't google docs at least be inheritently more reliable than a hard drive? Thanks, Walter

  Read the article

• What's the difference between a Table and a Named Range in Excel 2007?

  - by technomalogical

  Can someone explain the difference between Tables and Named Ranges in Excel 2007? It seems that in addition to having the features of Named Ranges, they're somehow marked as Tables which gives them special formatting & filtering options in the ribbon. Other questions: Can I treat a table as a named range? Does a named range provide me any functionality not offered by a table, and vice versa? Should I use one over the other (assuming that consumers of the spreadsheet are using Excel 2007 or higher)? Google has not been helpful (excel difference between named range and table and excel 2007 difference between named range and table) and I've found one resource describing table functionality, but no reference to named ranges.

  Read the article

• How can I change the amount of video memory with a Mobile Intel 4 Series Express Chipset?

  - by user45924

  I have the chipset in the title. The Intel control panel says the following: Intel® Graphics Media Accelerator Driver for Mobile Report Report Date: 8/11/2010 Report Time[hr:mm:ss]: 20:2:54 Driver Version: 8.15.10.2182 Operating System: Windows 7 (6.1.7600) Default Language: English (Canada) DirectX* Version: 10.0 Physical Memory: 3963 MB Minimum Graphics Memory: 128 MB Maximum Graphics Memory: 1759 MB Graphics Memory in Use: 17 MB Processor: Intel64 Family 6 Model 23 Stepping 10 Processor Speed: 1995 MHz Vendor ID: 8086 Device ID: 2A42 Device Revision: 07 Even while playing games, the Graphics Memory in Use only ever goes up to 26 MB. I've looked in the BIOS; there's nothing there. Is there any way I can force it to go higher? Thanks :)

  Read the article

• Laptop battery: is voltage really important to respect?

  - by Marc-Andre R.

  I got an Acer Aspire 5100 and I just bought a new battery (after the stock battery just died yesterday). But I saw something after buying and I'm wondering whether it's really important or not. My stock battery was a 6-cell 4000mah 11.1v and the new battery is an 8-cell 4800mah 14.8v . I know that 8-cell and 4800mah is okay, but what about the 14.8v instead of 11.1v? The battery description says it's compatible with my laptop model (AS5100, model BL51), but the voltage difference makes me wonder. Will the laptop only take what it needs? Or will it be getting 14.8v straight in the brain? I know that my wall plug claims to output 19v, so logically I'm thinking a higher voltage battery shouldn't be a problem. Am I correct in thinking this? Thanks in advance for your answers!

  Read the article

• Hardware Raid Card Reviews with SSDs

  - by Nalandial

  Yes I realize there are several questions about this but none of them seem to have the answer I'm looking for. I have two SSDs and am looking to buy a purely hardware raid card for them; however, I can't seem to find any reviews that have specifically tested hardware raid cards with SSDs rather than testing the SSDs themselves. I'm looking for a review because I'm assuming that for example: 100% gain with two 7200rpm drives doesn't necessarily mean 100% gain with a pair of SSDs, since there would be higher speeds, meaning more throughput, meaning more processor/memory usage for the card. If this assumption is wrong then that's fantastic; however if it's true, I am quite sad and would really appreciate any advice or reviews you can find. Thanks in advance!

  Read the article

• How to determine if a device is SATA driven and will be affect by the Sandy Bridge Intel Issue?

  - by joelhaus

  Looking to buy a higher-end Windows 7 laptop, but I'm concerned about the issue with the Intel Sandy Bridge chipset. Otherwise, my price range covers laptops within the latest (Sandy Bridge) generation of the Core i7 family. I understand that there is an issue with SATA ports 2-5 and I use a Windows Home Server over a WiFi connection to share files and backup my PC. The other storage devices that I will use (less frequently) are the built-in DVD-RW disc drive and various devices hooked up to the USB ports (i.e. Android devices, iPod, etc.). The question: Will this setup be negatively impacted by the problem Intel reported about Sandy Bridge? Given this information, is it unwise to purchase a laptop that has this flaw? I really don't know how to determine whether a device is SATA driven or not, so hoping someone can shed some light on this too. Thanks!

  Read the article

• Macbook Pro 2.66 GHz vs. 2.8 GHz

  - by nevan

  Is there much advantage in getting the higher end Macbook Pro compared to the mid-range one? The differences between the two are: 2.66 GHz vs. 2.8 GHz 256 MB graphics memory vs. 512 MB 3 MB L2 cache vs. 6 MB 320 GB hard drive vs. 500 GB $2000 vs. $2300 I've looked around, but I can't find any direct comparisons for the two machines. I'd be using the machine for development. I generally use a computer for 3 years. I don't really play games, but do use Photoshop regularly. I've heard that once Snow Leopard arrives, the graphics chip will be used to boost the main processor, so I was wondering if getting the one with more graphics memory would be an advantage?

  Read the article

• Custom resolution - Windows 7 - no drivers

  - by Vytautas Butkus

  I'm having some problems with my VGA card. When I enable my VGA drivers and boot windows up they crash and I get message that the problem occured with atimdag.sys drivers or smth like that. I'm gettin BSOD all the time, unless I go to control panel and I disable drivers manually. I can live with disabled drivers just fine(I'm already used to it in quite some time) but the annoying problem is my display resolution. I can not set my res to anything higher than 1024x768. I was wondering if it's possible to change resolution to my native displays resolution without drivers? I've been trying to find something that would work w/o drivers, but with no luck(I've found many of solutions how to do it with working drivers, but as you know I can not enable my drivers). So please, maybe someone could help me and tell me how to set custom resolution?

  Read the article

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >