Search Results

Search found 2556 results on 103 pages for 'middle'.

Page 71/103 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

  • Ubuntu 12.04 froze during update, won't boot

    - by Cichol
    I've recently installed Ubuntu 12.04 on my laptop, and every time i tried to update it, it would freeze for a few seconds, and tell me that the updates could not be downloaded. After many, many tries I managed to get them downloaded, but then in the middle of installing them, it froze. Completely. No mouse movement, no blinking lights, no nothing. After a few hours of letting it sit there, I finally hit the power button to do a hard reset, and now when I select Ubuntu on the boot screen (Dual-boot with Windows 7), I get a blank purple screen, and then nothing. Another freeze. I've tried getting into the console, but no command I input has any visible effect. I have a ton of music stored on the partition it's in, so I'd really rather not have to reinstall. My specs, to the best of my knowledge: Clevo Corp model B7130 (Sager custom) CPU: Intel Core i5 @ 2.53gHz (4 CPUs) Graphics Card: Nvidia GeForce 425m 4096 MB RAM Drivers: Whatever comes with the download of 12.04. As a side-note, I installed Ubuntu via the Windows Installer program (wubi). Does that make a difference?

    Read the article

  • 500 error with deploying rails application via apache2+passenger

    - by user1633983
    I finally completed my own app, so the only work left is deploying the app. I'm using Ubuntu 10.04 and apache2(installed by apt-get), so I'm trying to deploy through passenger. I installed passenger gem like this: sudo gem install passenger rvmsudo passenger-install-apache2-module and I configured apache settings as what the installation message says. I added below lines in the middle of /etc/apache2/apache2.conf file. LoadModule passenger_module /home/admin/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.17/ext/apache2/mod_passenger.so PassengerRoot /home/admin/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.17 PassengerRuby /home/admin/.rvm/wrappers/ruby-1.9.3-p194/ruby and, I appended below lines in /etc/apache2/sites-available/default file. <VirtualHost *:80> ServerName localhost # !!! Be sure to point DocumentRoot to 'public'! DocumentRoot /home/admin/homepage/public <Directory /home/admin/homepage/public> # This relaxes Apache security settings. AllowOverride all # MultiViews must be turned off. Options -MultiViews </Directory> But when I restart the apache service and hit the address, 500 error occurs. At first, it was same 500 error but the 500 error page is from apache's, but when I reinstalled the libapache2-module-passenger, the 500 error page is changed to that from rails'. Because of rails' 500 error page(which is located at public/500.html), I think passenger module is properly connected with apache. What should I do to fix this problem? Do I need to configure something inside my app before deployment?

    Read the article

  • OS X Apache giving 503 error for anything in /api directory

    - by WilliamMayor
    I have a locally hosted website that uses Smarty templates, I'm trying to get started on building an API for the site. I've used virtualhost.sh to create a local virtual host for this and other sites. I've discovered that if I put a directory called api at the root of any of these virtual hosts I will get a 503 error when I try to access anything inside. I am using mod-rewrite but so far only to append a .php extension when needed. Here are the error logs for a request: [Thu Feb 09 13:42:37 2012] [error] proxy: HTTP: disabled connection for (localhost) [Thu Feb 09 13:49:06 2012] [error] (61)Connection refused: proxy: HTTP: attempt to connect to [fe80::1]:8080 (localhost) failed [Thu Feb 09 13:49:06 2012] [error] ap_proxy_connect_backend disabling worker for (localhost) The middle line gave me a clue to look in my hosts file because why would a request go to [fe80::1]:8080? I commented out that line and tried again, this time the error was in connecting to the standard 127.0.0.1 localhost. I have concluded that perhaps there is some config file somewhere picking up the underlying request of localhost/api and pointing it somewhere other than my virtual host. At this point my ability to fix the problem fails me. Can anyone help?

    Read the article

  • Finding cause of TCP retransmission within a LAN

    - by Surreal
    Hello denizens of Server Fault I have an irritating problem with a LAN of about 100 computers, 2 Windows domain servers, and 12 VoIP phones. Since their installation around a year ago, every week or so, we notice a VoIP phone resetting itself - occasionally in the middle of a call. Simultaneously there are often signs of temporary loss of connection on computers: freezes in explorer while accessing network shares, errors in our administration software due to loss of connection to the database server. I have been doing some Wireshark monitoring on the connection between the VoIP PBX and the rest of the network. Wireshark picks up a clump of retransmitted TCP packets at the times when we record phone restarts. The Wireshark log shows about 2 clusters of retransmissions a day ranging from 5 packets to hundreds. Those in each cluster are mainly between the PBX and some set of the VoIP phones, but not always the same set. Often retransmissions at the same time are to phones connected to the same switch, but sometimes retransmissions occur together to phones at opposite ends of the network. There are usually some coincident retransmissions in passing TCP traffic, for example between client machines and the file servers. The spikes in retransmissions and phone resets do not correlate well with when the network is heavily loaded. They seem to occur slightly more during the day, but most in the evening, when traffic should be decreasing. They occur reasonably often late at night when most computers are turned off and traffic should be lowest. Do you have any ideas that might help diagnose the cause of problems like this? One thing I have not yet tried, but should have, is updating the firmware of all the switches.

    Read the article

  • How do I make XTerm not use bold?

    - by mike
    I like using XTerm, I like its default "fixed" font, and I like using terminal colors rather than having a monochromatic terminal. However, XTerm seems to insist on using a bold version of the font whenever it's displaying a bright color: I hate hate hate the bold version of the font, but I like the brightness. The man page seems to suggest that adding "XTerm.VT100.boldMode:false" to my ~/.Xresources would disable this "feature", but it doesn't seem to have any effect. I've had it in there for months, so it's not a rebooting issue. How can I force XTerm to always use the standard, non-bold version of the fixed font, even when it's displaying bright text? Edit: Some have suggested putting "XTerm*boldMode: false" in my ~/.Xresources. That didn't help either. I've confirmed that the changes have taken effect with xrdb, though: $ xrdb -query | grep boldMode XTerm*boldMode: false And if i run xprop and click an xterm, I get "WM_CLASS(STRING) = "xterm", "XTerm"" .. so i'm definitely running real xterms. BTW, this is just a plain-vanilla Ubuntu Intrepid box. If anyone else here is running the same, can you try running: echo -e '#\e[1m#' ...and let me know whether the # on the right has a black pixel in the middle like the one on the left does?

    Read the article

  • SQLRelay MySQL compatibility layer in php-cgi.

    - by sybreon
    I am investigating the use of sqlrelay as a middle-layer between an application that uses MySQL with a PostgreSQL backend. I assume that this is something that it can do to ease backend migration. But for the moment, I am just experimenting with a MySQL application accessing a MySQL backend through the sqlrelay layer. app => sqlrelay lib => mysql client lib => tcp => mysql server I followed the instructions for the MySQL drop-in replacement and it works. I can connect to the backend MySQL server using both sqlrsh and mysql client application. It will work for most MySQL applications by using LD_PRELOAD with the compatibility layer library. The instructions recommend re-compiling php to support it. I would prefer not doing something so drastic. They also recommend setting the LD_PRELOAD for apachectl as a method for the apache/php stack. However, this does not work with lighttpd/php-cgi. I have wrapped php-cgi with a shell script that sets LD_PRELOAD before running the cgi script. LD_PRELOAD=/usr/lib/libmysql50sqlrelay-0.39.4.so.1 /usr/bin/php5-cgi $@ I can see LD_PRELOAD correctly set in phpinfo() but the cgi scripts all fail and are unable to connect to the database. According to the mysql client, the compatibility library should report itself as a 5.0.0 client but the phpinfo module reports itself as the actual 5.0.51a client library used. This means that the compatibility library was not used. Is there someone who has had some success doing something similar?

    Read the article

  • Selective Pointer device remapping in linux

    - by user6368
    I just got an HP 2710p (hp tablet, with digitizer), and I've played around with linux for a while now, and thought I would go ahead and install it. Everything works fine, excepting normal tablet functions, which is to be expected. I'm working on the screen rotation, and there are on-screen keyboards, etc, but I'm having issues with the stylus. I can tap and left click with the stylus as normal, but the side button (which in windows functions as a right mouse button) appears as a 'button 2' to xev (a middle/scroll wheel button). I can switch 'button 2' and 'button 3' universally using xmodmap, but I'd like to do so exclusively for stylus so I don't screw up regular pointing devices. Altering xorg.conf (which is surprisingly bare) with the recommended sections (adding sections for each of the stylus buttons) does nothing. I'm running crunchbang, which is an ubuntu/debian varient with openbox as the windows manager. Thanks Also, as a seperate note, does anybody know how to detect when I rotate and/or latch the lid shut? I was thinking maybe I could run a script to switch the buttons when I close it, but I can't find any information.

    Read the article

  • How Do I Install Latest Java Plugin on Ubuntu 8.04 LTS with Custom Firefox 3.6.3?

    - by Volomike
    I have Ubuntu 8.04 LTS and will need to remain on that for awhile as I am a programmer and cannot disturb what I'm doing in the middle of a project. As you know, it doesn't want to install the latest Firefox by default and keeps me in the stone age. So, I had to install my own Firefox. I did so and with relative ease I was able to install the Flash plugin using the normal 'ln -s' technique one usually does with /usr/lib/firefox/plugins. Now I need to do a Gotomypc.com task and it requires Java -- moan -- so I need to figure out how to install Java. I downloaded and installed the latest Java plugin in /usr/java, and I do see underneath that layer of folders a plugins folder with a .so file. So, I went to /usr/lib/firefox/plugins and did this: ln -s /usr/java/jre1.6.0_20/plugin/i386/ns7/libjavaplugin_oji.so Then, I also read on the web that one has to create a ~/.mozilla/plugins folder, cd into it, and then run the same ln -s command again. Another site recommended finding one's ~/.mozilla/firefox and renaming it to ~/.mozilla/firefox.old (after you backed up your bookmarks) and then launching firefox again so that it creates ~/.mozilla/firefox and uses the new Java plugin. Well, all these attempts have completely failed and it is incredibly frustrating. I do about:plugins to see my plugins and all I get are the Flash and the default null plugin. I do not see the Java one. Also, they said on my tools menu with Firefox 3.6.3 I would see a Java Console menu and I don't see that either. I found a pluginreg.dat somewhere deep under ~/.mozilla/firefox, but it does not list the Java plugin inside -- only Flash and the null plugin. Please help me install Java. I need to help a client out and need to connect to his PC remotely with gotomypc, which requires Java inside firefox.

    Read the article

  • Kindle (client) for Mac

    - by doug
    So we're clear, i'm talking bout the client/software version here--ie, that you install on your Mac or PC--not the device. The Kindle client was recently released for the Mac. I bought a couple of Kindle-edition books and i'm reading them using this client. Astonishingly, two features i consider to be more or less essential to any ebook reader are missing in the Kindle client, either that, or i can't find them: (i) text searching; and (ii) highlighting text. First, does anyone know how to access the search feature? I'm aware of the "Go To" button at the top middle of the reader window--the options in that menu when you click the button are: "Cover", "Table of Contents", "Beginning" and "Location." "Location" requires that you type in an integer (but it doesn't correspond to page number--e.g., typing "167" brought me to the table of contents), not a search term. Second, there's a button on the upper right-hand corner of the window "Show Notes and Marks" yet i can't find any way to highlight text. The only kind of "note" or "mark" i have been able to record is to "bookmark" a page by clicking the "bookmark" button also at the top of the window.

    Read the article

  • Install IIS on Server 2003 unattended via PowerShell as a service user (no terminal session)

    - by maik
    I've been racking my brain with this for a bit and figured I would ask here to see if anyone could enlighten me. As the title says, I'm trying to install the IIS role on Server 2003 using an unattended install method launched via a service. We're using RightScale and most of what we want to accomplish is pretty straightforward. I created an unattend file for use with sysocmgr.exe: [Components] iis_common = ON iis_www = ON iis_www_vdir_scripts = ON iis_inetmgr = ON fp_extensions = ON iis_ftp = ON And I invoke it like so: sysocmgr.exe /i:%windir%\inf\sysoc.inf /u:C:\path\to\iis-unattend.txt /r /x /q If I run that from a command prompt while logged in as Administrator it works just fine, but if it runs via RightScript (the RightScale user on the server, which is a local admin) it fails somewhere in the middle and the logs I get are rather unhelpful. The thing is I can do this same thing with the SNMP Client (which is a Windows component, not a server role) and it works with no problems while run via the script service user. My best guess is that sysocmgr.exe is expecting a GUI element to be there during the role installation and since the service user has no terminal session it coughs and dies. That's just a wild stab in the dark.

    Read the article

  • Opening an existing process

    - by Grasper
    I am using Eclipse in Linux through a remote connection (xrdp). My internet got disconnected, so I got disconnected from the server while eclipse was running. Now I logged in again, and I do the "top" command I can see that eclipse is running and still under my user name. Is there some way I can bring that process back into my view (I do not want to kill it because I am in the middle of checking in a large swath of code)? It doesnt show up on the bottom panel after I logged in again. Here is the "top" output: /home/mclouti% top top - 08:32:31 up 43 days, 13:06, 29 users, load average: 0.56, 0.79, 0.82 Tasks: 447 total, 1 running, 446 sleeping, 0 stopped, 0 zombie Cpu(s): 6.0%us, 0.7%sy, 0.0%ni, 92.1%id, 1.1%wa, 0.1%hi, 0.1%si, 0.0%st Mem: 3107364k total, 2975852k used, 131512k free, 35756k buffers Swap: 2031608k total, 59860k used, 1971748k free, 817816k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 13415 mclouti 15 0 964m 333m 31m S 21.2 11.0 83:12.96 eclipse 16040 mclouti 15 0 2608 1348 888 R 0.7 0.0 0:00.12 top 31395 mclouti 15 0 29072 20m 8524 S 0.7 0.7 611:08.08 Xvnc 2583 root 20 0 898m 2652 1056 S 0.3 0.1 139:26.82 automount 28990 postgres 15 0 13564 868 304 S 0.3 0.0 26:33.36 postgres 28995 postgres 16 0 13808 1248 300 S 0.3 0.0 6:54.95 postgres 31440 mclouti 15 0 3072 1592 1036 S 0.3 0.1 6:01.54 gam_server 1 root 15 0 2072 524 496 S 0.0 0.0 0:03.00 init 2 root RT -5 0 0 0 S 0.0 0.0 0:04.53 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.04 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 0:01.72 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:00.07 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 0:04.33 migration/2 9 root 34 19 0 0 0 S 0.0 0.0 0:00.05 ksoftirqd/2

    Read the article

  • Adobe Acrobat Reader don't zoom out the page enough in "one page" mode

    - by mbaitoff
    I'm using Adobe Acrobat Reader version 9.4 under Debian Lenny. I'm experiencing a problem: when I push the "Show one page at a time" button, I expect the page to zoom such that pressing PgUp/PgDn would turn to the next/previous page. However, the zoom seems to be not enough - very thin bottom portion of the page doesn't fit inside the reader window, and pressing PgUp/PgDn gives the jitter of the same page, and I have to push twice to get to the next page. It is even worse in continuous page mode - a roll of pages begin to be non-synced with window boundaries, ending up with page break right in the middle of the view after several turns of the pages. This behaviour doesn't occur on windows version - I have a page properly zoomed in single/continuous modes, so that turning the pages is performed as page-at-once, as intended. How to make the Acrobat Reader fit the page to window properly? Thats how it looks before pressing PgDn (notice the bottom edge of the "paper" hidden beneath the bottom window edge): Thats how it looks after pressing PgDn (notice the "paper" bottom edge emerged from beneath the window edge, while the "paper" upper edge hides behind the upper window edge, showing that the document window size is not enough to contain the whole page):

    Read the article

  • How do I calculate clock speed in multi-core processors?

    - by NReilingh
    Is it correct to say, for example, that a processor with four cores each running at 3GHz is in fact a processor running at 12GHz? I once got into a "Mac vs. PC" argument (which by the way is NOT the focus of this topic... that was back in middle school) with an acquaintance who insisted that Macs were only being advertised as 1Ghz machines because they were dual-processor G4s each running at 500MHz. At the time I knew this to be hogwash for reasons I think are apparent to most people, but I just saw a comment on this website to the effect of "6 cores x 0.2GHz = 1.2Ghz" and that got me thinking again about whether there's a real answer to this. So, this is a more-or-less philosophical/deep technical question about the semantics of clock speed calculation. I see two possibilities: Each core is in fact doing x calculations per second, thus the total number of calculations is x(cores). Clock speed is rather a count of the number of cycles the processor goes through in the space of a second, so as long as all cores are running at the same speed, the speed of each clock cycle stays the same no matter how many cores exist. In other words, Hz = (core1Hz+core2Hz+...)/cores.

    Read the article

  • Prevent Exchange Server from advertising itself on domain

    - by Justin Shin
    I'm in the middle of setting up an Exchange 2010 Server. Currently, we use a SaaS provider for Exchange 2007 services. Some (but not all) of my users have been reporting that they are receiving Outlook/Exchange login prompts to login to the new Exchange server. This is happening without any intervention on the client's machines. The Exchange server is a member of the domain and connects to the domain site remotely through a site-to-site VPN. What can I do to prevent these login prompts from appearing? Will shutting down the new server until it is time to switch resolve these issues? A little more info: I found that on one of the client computers, all of the settings for Outlook over HTTP had been changed (automatically) from webmail.provider.com to mail.company.com (the latter being the new server). This happened when I enabled Outlook Anywhere access on Exchange 2010. I changed the client's settings back, and everything was groovy. But, when I disabled Outlook Anywhere again, the logon prompt came back.

    Read the article

  • NTFS partition size not recognized after disaster recovery clone

    - by djechelon
    I'm in the middle of a disaster recovery of a 250GB hard disk that was "clicking". Obviously I didn't have a backup copy. I managed to salvage all the files thanks to GParted Live that was able to read the disk without a single "click" sound. So I cloned the partition to a new drive sized 500GB. Unfortunately, GParted process went to some kind of infinite loop, disks stopped I/O and after a couple of hours I interrupted the clone process I started. Now the problem is: when cloning the partition I also chose to expand 250GB to the whole 500GB of the target disk. Windows sees the partition sized 500GB in computer management, but Windows Explorer only sees 250. chkdsk e: /f says the filesystem is OK. How can I repair the file system and let Windows see the full 500GB of the new partition? An alternate idea is to deep-copy the files from the backup disk to a newly formatted disk. This should definitely fix. Any other ideas?

    Read the article

  • Disc drive busy on MacBook, with disc stuck inside.

    - by ayaz
    I have a white MacBook, running Snow Leopard, 10.6.3 with the latest updates. I popped in a DVD that the system failed to mount. I did not see any conspicuous errors. As a result of this failure, the DVD got stuck in the drive. Neither pressing the eject button on the keyboard nor running the diskutil eject command caused the DVD to come out. The commands drutil eject and drutil tray open could not get the DVD to budge at all. The 'mount' and 'eject' buttons on the window for Disk Utility are dimmed out, while it is written in the middle for the DVD drive that that particular disc drive is busy. This is not the first time this has happened with me. I know that I will ultimately have to resort to rebooting the system and holding down the eject button to get the DVD to come out. But, is there any workaround that does not involve rebooting the system and prying the disc out? The drive on this MacBook does not have a needle-pin reset button -- at least, I couldn't find it anywhere. Any help will be greatly appreciated. Many thanks.

    Read the article

  • Experiences in Upgrading from Exchange 2003 to Exchange 2010

    - by gWaldo
    I'm currently running Exchange 2003 SP2 Cluster on a Server 2003 AD Forest (in native 2003 mode), and we beginning to plan the upgrade to Server 2008 AD and Exchange 2010. We have two main sites, one middle-sized office, and a couple of smaller sites which have DCs (which may be RODCs after the upgrade). Currently all of our Exchange cluster is in my main site, but we are considering using the new datastore paradigm for load-balance/failover at the other large site, but this is not set in stone. Right now we are in the information-gathering and planning phases. I am looking for input of any gotchas experienced while performing either upgrade, but especially the Exchange upgrade. Gotchas? What surprised you? What wasn't documented? What said one thing but was misleading? (Confusing either in content or severity.) What is great or horrible about the new system? What worked well? What worked poorly? If you were to do it over again...? (I know that this isn't so much a question that can be definitively answered, but I'm happy to reward insight and useful resources (not the Microsoft documentation, but Blogposts are welcome) with upvotes.) UPDATE A couple items of note: -We are not currently using OWA (currently only the admins), but it may become more of a consideration with iOS devices. -We do have a small number of Blackberries in the environment (< 10%). -In addition to the standard Exchange connectors, we have a third-party connector for Captaris RightFax integration.

    Read the article

  • Running Debian as guest operating system on a Hyper-V VM

    - by kce
    Hello. Layer-9 considerations are prompting a migration from Citrix XenServer to Hyper-V as our shop's virtualization platform of choice. This will require me to migrate our existing virtual machines from XenServer to Hyper-V. A hand full of these VMs are running Debian. Unfortunately, Debian does not seem to be on the list of approved/supported guest operating systems. In fact it seems that running Debian as a guest operating system of is rather difficult, although apparently not impossible. I have two interrelated questions: Does anyone have any experience running a Debian guest on Hyper-V? Is it one of those things where it just will not work at all or is more along the lines of "it will probably work fine, but we won't support it". Any experience here, positive or negative, would be helpful. How much of a bad idea is it to deviate from Hyper-V's list of supported guest operating systems? Again, is it either basically asking for Bad Things (TM) to happen or is just another instance of "it will probably work fine, but we won't support it"? Or is it somewhere in the middle? Thank you.

    Read the article

  • Active Directory Password Formats

    - by Brent Pabst
    Hi, I'm working on an open source project that will manage active directory users. I am looking for feedback from Windows/Active Directory Admins on the formats of usernames they prefer or their organization uses. I want to make sure the software allows admins to use the most popular formats when new users are created. Here is the list I have so far: 1. <firstname><lastname> 2. <lastname><firstname> 3. <lastname><firstinitial> 4. <lastname><firstinitial><middleinitial> 5. <firstinitial><lastname> 6. <firstinitial><middleinitial><lastname> 7. <firstname><lastinitial> In addition how do you handle multiple identical names? So if two John Smith's exist do you append a numeric number, or interject a middle initial or name to solve the problem? Thanks for the feedback

    Read the article

  • Active Directory + IIS + SQL + ASP.NET

    - by Amira Elsayed Ismail
    I have sent the following question to stackoverflow website I have installed Windows server 2008 r2 on a virtual machine, Can I install Active directory with domain controller + IIS + SQL server on the same machine? I want to make web application and this web application will authenticate users from Active Directory, the web application should be published on the server IIS and the users should access it remotely from their home using domain name of my machine, Someone tell me that its very wrong to have IIS and Active directory on the same machine I got the following Answer You can't use ActiveDirectory over the internet. At least not without something like a VPN as a middle man. Their home computers will not be joined to the domain, so there is no pass-through authentication. Yes, it's a bad idea to put AD on the web server. Why is too complex to get into in an answer here. Suffice it to say that even if you did do this, it's probably would not work the way you are thinking it should. It's not impossible to do this. For instance, many of the Microsoft "Small Businesss" products put IIS, AD, and SQL Server on the same server. But, you kind of have to know what you're doing to configure it securely. Then I add the following comment Thanks for ur reply.so what you think about the best way to do this as I didn't do anything like that before should I install active directory on a machine and IIS on another machine ? and what about SQL should I add it to the same server of active directory ? I didn't mentioned also that it will be Microsoft dynamics server that will access some information about work and i have to read data from axapta also ? also what is VPN and how can I use it to let users access my web application anywhere ? Sorry for my long questions and thanks in advance so please if anyone can help I will be thankful

    Read the article

  • PC freezes after repeated clicking noises

    - by Péter Török
    I have an oldish PC (Athlon XP 2200, WinXP). Every time I switch it on, I hear a loud "click" first of all, and when it is shut down, again a click is the last sound I hear. Lately it started to behave erratically: it started to click loudly in the middle of a session. First only once in a while, then repeatedly for several seconds in a row, and finally it froze completely. We were not doing anything particular during these times, usually just browsing the web. This has already happened twice in a few week's time period. We typically use it only in the evenings, so when the freeze happened, I just decided it is time for the bed. When it was started up the next day, everything looked fine. Any hints on what could be the culprit? Could it be caused by an ageing heat fan, or dust that has accumulated inside the case? We are backing up all the data stored on it, and then will open the case to look inside, but I thought it would be good to get some background info first of all.

    Read the article

  • How to edit known_hosts when several hosts share the same IP and DNS name?

    - by Frédéric Grosshans
    I regularly ssh into a computer which is a dual-boot OS X / Linux computer. The two OS instance do not share the same host key, so they can be seen as two host sharing the same IP and DNS. Let's say the IP is 192.168.0.9, and the names are hostname and hostname.domainname As far as I understood, the solution to be able to connect to the two host is to add them both to the ~/.ssh/know_hosts file. However, it is easier said than done, because the file is hashed, and has probably several entries per host (192.168.0.9, hostname, hostname.domainname). As a consequence, I have the following warning Warning: the ECDSA host key for 'hostname' differs from the key for the IP address '192.168.0.9' Is there an easy way to edit the known_hosts file, while keeping the hashes. For example, how can I find the lines corresponding to a given hostame? How can I generate the hashes for some known hosts? The ideal solution would allow me to connect to seamlessly to this computer with ssh, no matter whether I call it 192.168.0.9, hostname or hostname.domainname, nor if it uses its Linux hostkey or its OSX hostkey. However, I still want to receive a warning if there is a real man-in-the middle attack, i.e. if another key than these two is used.

    Read the article

  • The USB mouse sticks in Windows 7 after automatic attempt to fix the boot

    - by chelder
    Avast Antivirus asked me to delete a probable virus and to restart to perform a checking. I had to stop the checking at the middle of the procedure as I needed the computer. It was imposible to turn off the computer pushing the power button (as it entered in suspension mode, no matter how long I kept pushed the power button). I removed the battery as the only way to restart the computer. Windows 7 said that there is a problem to iniziate Windows. Windows 7 tried to fix the problem without success. Windows 7 started after that though. Everything is OK but the USB mouse. The USB mouse sticks and freezes each couple of seconds more or less. The tactile mouse (PS2) works well. I googled for solutions but the posible solutions didn't work for me. What happened? How could I fix it without formatting and reinstalling everything? UPDATE: this is what I did: Change the mouse from one usb port to another Test another mouse Set the number of cores of the CPU manually with msconfig Power management: not disable usb ports Check hard disk errors

    Read the article

  • FastGate A20 Line And Himem.sys Issue With Updating BIOS

    - by Boris_yo
    I have been persistent with a thought to perform my first BIOS update ever through MS-DOS but have been postponing this task until today. Despite people telling me any bootable ISO will do it either through CD-ROM or RAMDRIVE, I am still having problems. First is the problem with CD-ROM driver trying to make it work with 4 driver files (cd1.SYS, cd2.SYS, cd3.SYS, cd4.SYS) as well as starting RAMDISK proved to be failure: CD-ROM XMS Allocation Error RAMDISK XMS Allocaton Error (X: and R: drives not working) This A20 line seemed to be the obstacle which then after a couple of searches pointed me to this article on Microsoft website. It seems that FastGate is the culprit which takes over A20 line and conflicts with himem.sys which should be handling it causing the driver to be unable to allocate memory resources. Albeit article suggests 2 workarounds which is disabling FastGate option or adding switch, I read that the former workaround could cause problems which involves later tinkering BIOS, disabling shadow copy etc. while the latter workaround can just hang system as stated in the link above. I assume it just hangs the boot process from image file though. Summing up the above, I am cautious and think it is risky to follow both workarounds because disabling FastGate or trying adding switch by trying available switches from 1-14 or 16, could crash the BIOS update process by itself. I could do this without the need for himem.sys with bootable USB thumbdrive by making it to be seen as USB-HDD, but some time ago I read that it is never a good idea to update BIOS from hard drive so even thought it is simulation, who knows... Maybe it will deactivate hard drive in the middle of the BIOS update process or even USB thumbdrive per se? One forum discussion was about updating BIOS and somebody suggested to not load himem.sys for some reason, but now that I think of it, what if BIOS update needs upper memory?

    Read the article

  • IPtables: DNAT not working

    - by GetFree
    In a CentOS server I have, I want to forward port 8080 to a third-party webserver. So I added this rule: iptables -t nat -A PREROUTING -p tcp --dport 8080 -j DNAT --to-destination thirdparty_server_ip:80 But it doesn't seem to work. In an effort to debug the process, I added these two LOG rules: iptables -t mangle -A PREROUTING -p tcp --src my_laptop_ip --dport ! 22 -j LOG --log-level warning --log-prefix "[_REQUEST_COMING_FROM_CLIENT_] " iptables -t nat -A POSTROUTING -p tcp --dst thirdparty_server_ip -j LOG --log-level warning --log-prefix "[_REQUEST_BEING_FORWARDED_] " (the --dport ! 22 part is there just to filter out the SSH traffic so that my log file doesn't get flooded) According to this page the mangle/PREROUTING chain is the first one to process incomming packets and the nat/POSTROUTING chain is the last one to process outgoing packets. And since the nat/PREROUTING chain comes in the middle of the other two, the three rules should do this: the rule in mangle/PREROUTING logs the incomming packets the rule in nat/PREROUTING modifies the packets (it changes the dest IP and port) the rule in nat/POSTROUTING logs the modified packets about to be forwarded Although the first rule does log incomming packets comming from my laptop, the third rule doesn't log the packets which are supposed to be modified by the second rule. It does log, however, packets that are produced in the server, hence I know the two LOG rules are working properly. Why are the packets not being forwarded, or at least why are they not being logged by the third rule? PS: there are no more rules than those three. All other chains in all tables are empty and with policy ACCEPT.

    Read the article

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >