Search Results

Search found 18341 results on 734 pages for 'neural network'.

Page 71/734 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

• Mixed network, Linux-to-Linux hostname resolution issues

  - by James

  At work we have an WinSBS domain at the heart of our network, which is all Windows PCs. The domain controller is acting as a DNS for these computers. I have recently added some personal use Linux machines to the network, without joining them to the domain. I have set up Samba with "wins server" pointing to the domain controller, which lets the Windows boxes resolve the Linux hostnames just fine. I also have resolvconf set up with the domain controller as a nameserver and the local domain as a searched domain, which lets the Linux boxes resolve the Windows hostnames just fine. However, the Linux boxes will not resolve other Linux hostnames at all. Given that I don't have control over the DNS server (I am not the network admin) and that at least one of the Linux boxes is not an always-on machine and is likely to change its LAN IP frequently (via DHCP), what service am I missing to make their hostnames visible to each other?

  Read the article

• Mac Parallels - Bridged network

  - by Jack

  I am new to Apple and my task is to install VMs on a Mac server. I am trying to install 4 VMs and I want them to have separate IPs and be visible on the network as separate machines. What are my options? My research shows me that I can use a bridged network, but I have to select an adapter. I have only two network adapters, does that mean I can only have 2 VMs? And when I configure the 2 VMS, will my actual server have internet connection? Or does it use the Mac's address?

  Read the article

• OS X will not register newly installed network adapters

  - by Chris

  I have purchased an Edimax 7318USg and tested it on a Windows machine (works). The installation process for the software for this adapter runs smoothly. However, OS X simply does not recognize new network adapters. When you go to System Preferences/Network, a new network adapter should be present/there should be an alert. This is not the case. Why might this be? Is there a setting I may reset to force the operating system to recognize this? Thanks!

  Read the article

• Ubuntu Kernel Panic on Inserting Network Cable

  - by Skizz

  I've been having a recurring kernel panic with my Ubuntu 9.04 installation (see other posts by me). Today, I was fiddling around trying to get some cable attached when the system panicked. Looking at the layout, the only cable in the vicinity was the network cable. Upon further investigation, it seems that the system reliably panics whenever I insert a network cable. Removing the cable does not cause the panic. How do I stop the system panicking when I insert the network cable? If more information is needed, please add comments/answers and I'll post the required data.

  Read the article

• Windows 7 freezes on connecting second time to same wifi network

  - by Rakesh Juyal

  I am using Lenovo - y470, which comes with windows 7 home premium. I can connect to my wifi network and there is no issue in that. But the problem comes if the network get disconnected and i again try to connect to same wifi network. As soon as i click on connect my system freezes, and i can not even press ctrl+ alt+ del . The only think i am allowed to do at that time is press and hold power button to shut down the system and restart it again. Please tell me how to resolve this issue. Please let me know if some more information is required. OS: Windows 7 Router: Netgear n-150

  Read the article

• Problems connecting Centos to the network when running in VMWare

  - by Sakin

  Hi, I installed CentOs on VMware running on windows XP. When trying to configure it to connect to the internet, I get an error message when trying to bring up the network interface: [root@VMLinux ~]# /et/init.d/network start Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... failed [FAILED] VM is running on a machine that has access to the network, I tried it on two different networks that have DHCP enabled. I tried to configure VMWare to use a bridged connection as well as NAT connection. An image of Ubuntu runs fine on the same VMware. What am I missing here? Thanks.

  Read the article

• gigabit network with adsl modem

  - by user51006

  Hi, i would like to build a gigabit network to connect the different computers at my home. I already have an 100Mb adsl router/modem but i have an hard time to find a 1000Mb one, so i came up with the idea of using a normal 1000Mb router or switch to put between the adsl modem and the computers. So i only use the adsl modem to connect to the internet and the gigabit router as dhcp to connect the different computers. But to get to the question. Will the 100Mb adsl router slow down my network? Will data travel like pc gigabit router computer or pc gigabit router adsl router gigabit router pc. My gut says it will go like in the first option but i have seen network hardware do some weird stuff. What do you think?

  Read the article

• Planning home network

  - by gakhov

  I'm planning to setup my home network from scratch and want to ask professional opinions or tips. My home is connected to Internet with a cable connection (100 Mb/s). The devices I would like to connect are VoIP phone (RJ-45), TV (WiFi/LAN), 3 laptops (WiFi), 2 smartphones (WiFi), an iPad (WiFi), a Kindle (WiFi), a network printer and, probably, a home media storage (WiFi/LAN). As you can see, the most load will be on WiFi connections (probably, even if TV supports WiFi it's better to connect it by LAN?). So, I need help to choose the best router (or combination of routers) to support stable connections for all these devices and minimize the total number of routers/adapters. I like how Cisco/Linksys devices were working for me in the past, so preferably (but not obligatorily) I want to setup network with their solutions. Any thoughts?

  Read the article

• Office 2007 network share access denied

  - by Rodent43

  Hope I have not duplicated an issue already posted but I could not find anything from the search... Right here is the problem, we have recently updated all our desktops to the MS Office 2007 suite and people have issues trying to open simple files like word documents... the systems are Windows XP (SP3) Novell Network with novell client Office 2007 when they try to open a word document from a usual network share word presents a message reporting Access Denied Contact Administrator So we assumed network permissions, none of which have changed...so try the same file with Wordpad and it opens fine, be it with formating issues of course... Now copy the file to your desktop, which is not redirected, and you can open the file in word as normal... so does anyone know if office 2007 uses some new permission when opening files? does it create temps or something... any pointers would be appreciated

  Read the article

• Why does WebDAV fail from inside home network

  - by Claus

  On my OSX server there is a folder that is configured in the Server App to be accessible via WebDAV. This folder is used to sync OmniFocus. On my router, I have set up a dynamic dns. When I am outside my home network (physically away or when connected via a vpn), I can connect and sync fine via: https://<server name from dyndns>/<username>/<path to WebDAV folder> However, when I am in my home network, the connection to WebDAV does not work (other connections, AFP, f.ex, do work). What could be some reasons why I can't connect to WebDAV from within my home network? What log files could give hints and where are they stored? I am running OSX server 10.9.3. and server.app. Thanks for your help.

  Read the article

• Hyper-V extensible virtual switch disables network

  - by Sebastian Krysmanski

  I just installed the Hyper-V role on my Windows Server 2012. It comes with something called a "Hyper-V extensible virtual switch". I assigned it to the only network card in my server. By doing so, the network card became useless/disabled/inactive/.. because the virtual switch disabled all features (IPv4, IPv6, Client for Microsoft Networks, ...) on the network adapter. Is this supposed to happen? I admit I've no idea what this "extensible virtual switch" actually does. A short explanation would be nice as well.

  Read the article

• 2nd/3rd version of wireless network appears

  - by neildeadman

  I replaced an old SpeedTouch ADSL router with a Netgear DG384 that I have and whilst doing so decided to change the wireless password. For this question assume my wireless network SSID is DeddersHome. On my netbook and macbook pro (running Win7) it won't connect to the Internet. When I hover over the tray icon for wireless it says "DeddersHome 2" and "DeddersHome 3" have no internet connection. What are these additional wireless networks? I can't see them in the wireless network list on any wireless device I have. Wired connections and wireless through my iPhone work fine. I saw this before with the SpeedTouch, but it just went away!! I also have one Apple AirPort Express connected to the wireless network which my Xbox is connected to (wired). This all worked before... I am going to remove AirPort to see if it is this causing the problem, but thought I'd ask the question to give it time for an answer whilst I continue to search. Cheers

  Read the article

• Can't connect to YouTube from specific network

  - by Tyilo

  Using my current network, I am unable to connect to http://www.youtube.com/. It doesn't matter what browser I use or if I use a cli-command (wget, curl). Error in Google Chrome: Oops! Google Chrome could not connect to www.youtube.com Error using curl: curl: (7) couldn't connect to host If I use nslookup to get the IP-address of YouTube, I get 173.194.32.32. If I go to http://173.194.32.32/ in my browser it can connect, but as Google is probably checking the Host HTTP-header, it shows Google's frontpage instead. There is no blocked websites on the router and other devices on the network seems to work. My computer only has this problem on this specific network. I am using Mac OS X 10.8.2 on a MacBook (mid 2009).

  Read the article

• Windows 7 Wireless Network Adapter Stopped Working

  - by Andrew B Schultz

  I have a Windows 7 Ultimate machine where the wireless adapter all of a sudden started having trouble connecting to wireless networks. Whenever I go to a new place and try to connect to a wireless network, it says that the DNS server is not responding, and tells me to go unplug the router and try again. After several locations in a row telling me this, I began to realize something was wrong with my adapter, not the routers. I am no longer asked to identify the security level for any new networks (Work, Home, or Public) like I used to be (it defaults to Public now - with the park bench icon). Often, resetting the router doesn't even work. Running the Windows 7 troubleshooter doesn't give me anything better than the advice to reset the router. However, the adapter will still connect to the wireless network at my main office without any problems. Does anyone know why a wireless network adapter can get so finicky so suddenly? Thanks!

  Read the article

• routing traffic between two network cards through firewall

  - by RubyFreak

  I'm trying to test a network device (firewall) using a Linux box, with two network cards, one interface connected to the WAN zone and another interface to LAN zone. The configuration is similar with that |ETH0| <-> | FW | <-> ETH1 So from both interfaces I'm able to ping the respective firewall interface. But i'm not able to fire something like: ping -I eth0 ip.from.eth1 and to get any answer. Is that possible or should the linux network namespace solution or user level tcp stacks (VMs are out of question)

  Read the article

• Network adapters reliability

  - by casey_miller

  Can you help me with understanding of reliability of network adapters. Most of the time servers do have at least 2 NIC's bonded to provide sort of a HA for it. So in case of one NIC fails, the second would still do the job. I wonder which factors work when you use network adapters. I know that, the most important and weakest part of any computer system is: storage (i.e HDD). but how reliable actually network adapters are? There are more expensive ones, and cheaper adapters. In which cases do they actually fail? In what circumstances. May it be a intensive usage of them Time when it's on In your experience how often you found yourself changing NIC's due to their fail? Or just what's the typical lifetime of commodity NIC's? thanks.

  Read the article

• Mapping skydrive as network drive in macos

  - by vittore

  as you probably know, if you have windows live account you can use free skydrive 25 gb storage. Even more a lot of people know that if you go to your skydrive in browser and copy cid query parameter value (https://...live.com/...&cid=xxxxxxxx ) you will be able to map skydrive as network drive in windows using this network pass \[cid].docs.live.net[cid]\ I do now that if you have network share like \server\folder i can map it in macos too, as smb://server/folder. however it is doesn't seem to be a case with skydrive when i try to map it as smb://[cid].docs.live.net/[cid] finder tells it can't connect. Anyone know how to map it ?

  Read the article

• Dial-in VPN Routing issue when on 192.168.x.x network range

  - by Ian

  I'm not an expert on networks but have a small office on the 192.168.x.x. range which is managed by a vigor (2800) router. I have enabled the VPN dial-in option on the router so I can get to the server on 192.168.1.100 which works fine from my macbook when i'm NOT on a local network with that is on the 192.168.x.x range. e.g. works fine when I tether over my Android smartphone but when I try & connect when on my home network, it connects, I can access the router (192.168.1.1) but cannot access 192.168.1.100 - traceroute doesn't hop via 192.168.1.1 I have enabled "send all traffic over VPN connection but again, not joy... Feels like the osx platform isn't routing the traffic out to the vpn endpoint as the destination address is on the local subnet but expect it would be. This work fine on a windows PC on the same home network. Any thoughts on what the issue could be?

  Read the article

• Wordpress network admin pointing to root as opposed to subdirectory

  - by Ian

  I've installed Wordpress on my nginx server in /blogs and new networks will be in /blogs/blogname. All my main site links point to example.com/blogs, but when I go to network admin the links point to http://www.example.com/wp-admin/network/ instead of http://www.example.com/blogs/wp-admin/network/ Here's the multisite section in my config: define('MULTISITE', true); define('SUBDOMAIN_INSTALL', false); $base = '/blogs'; define('DOMAIN_CURRENT_SITE', 'www.example.com'); define('PATH_CURRENT_SITE', '/'); define('SITE_ID_CURRENT_SITE', 1); define('BLOG_ID_CURRENT_SITE', 1); If I try changing PATH_CURRENT_SITE to /blogs, I get a db connection error. Thanks.

  Read the article

• Choosing a home network layout

  - by James M.

  I have a server, 4 PC's, a network printer, a switch and an ADSL modem. Currently the server runs Red Hat 9 and sits between the internet and the other PCs like in http://upload.wikimedia.org/wikipedia/en/1/12/Sample-network-diagram.png I have bought a new server PC to replace the old one, and I plan to install Fedora Core linux on it. The server acts as web and file server. The PCs all run Windows. Alternatively, I could connect the new server and all PCs to the switch, and connect the switch to the modem. (Sorry, couldn't find an image.) What are the pros and cons of these network layouts? Eg. in terms of reliability, security and flexibility? I am not a Linux guru but know of (and am not afraid of) iptables, dhcpd et al. Thank you for any tips, pointers and links.

  Read the article

• How to have 2 windows machines on the same network with the same IP address

  - by Stu

  I have a custom made ADC device that is spitting out data by addressed UDP packets. I have that device plugged into a 4 port switch. I have one windows embedded standard 7 machine which is the normal recipient of that data. To be able to receive the data (Using LabVIEW) the windows network adapter IPv4 settings must have a static IP address that corresponds to the UDP packet destination. I would like to add a second windows machine (This one is just regular Win 7 Pro) to simultaneously catch the data, however with all devices connected to the switch, the Win 7 Pro machine recognizes an IP address conflict and will not take the setting for the required static IP address. (The network adaptor settings show that the correct value has been entered but ipconfig shows that it is not actually set.) Neither windows machine needs to transmit network data, they only need to be able to receive the UDP data from the ADC device. Is there any way to disable this IP address conflict detection 'feature' of windows networking?

  Read the article

• Exim: Change sender address when sending mails out of local network

  - by Esa Varemo

  We have a working exim setup at a site, where users can send and receive mails. We are trying to setup a server to send some warnings and errors using email to an address that is outside the local network. The problem is: The program that sends the mails sends them using the username it runs under and the local hostname of the server. This cause the mails to have a sender of format: [email protected]. Exim sends these mails to the ISP's SMTP server, which rejects the mails as they have an illegal or unverifiable sender (the internal address). I'm thinking I should configure exim to rewrite the sender when: - sender's domain is on the local network - receiver's domain is outside the local network I tried setting some kind of rewriting in the exim config, but did not manage to get it to work. I'd show what I have tried, but I ran out of time on the last visit to the site, and had to revert to the original version losing all the changes I tried.

  Read the article

• Finding spoofed IP address on network

  - by Jared

  I have a few IP spoof dropped messages coming out of my Sonicwall firewall, we'll call them Source A and Source B. Both of these sources have the same mac address indicating they're coming from the layer 3 switch behind my firewall. Source A has an ip within a valid subnet on my network and it shows up in the ARP table of my layer 3 switch. I was able to trace the exact location and fix the issue. Source B's ip however, is not within valid subnet on my network and it's not showing up in my layer 3 switches arp table. Any idea how I can trace the location of this device within my network? Thanks in advance.

  Read the article

• Access my router's gateway network?

  - by Danpe

  I have 2 routers in my place. Main Router (Connected to the Internet) - 192.168.1.1 Secondery Router (Connected to the Main Router) - 192.168.0.1 I have a Network Storage Device and few Shared Directorys connected to the Main Router. (Network Storage - 192.168.1.16) How can i acces one of them using a PC connected to the Secondery Router? Home Network Diagram: I currently have access to the internet using both laptop and Main PC. But i want to get access from my laptop to the Storage and to ym shared directorys. The problem is the my Main router always forwards all packets stright to the WAN.. (Internet)

  Read the article

• Vista to Vista network visability issue

  - by Sk93

  Hi All, I've got a Vista Business PC and a Vista Business Laptop connected via a virgin media router (Netgear CG2100D) and I cannot get the two machines to see each other correctly over the network. The laptop is connected via wireless, whilst the pc is wired. Both are set to recieve their network settings automatically (DHCP) and both have the windows firewall (the only firewall on either) turned off completely. I can ping each machine fine from one another using the ip addresses, and I can also connect via \. However, connections via \ fail, and I cannot see the machines in the network map. I have tried turning netBIOS to be "always on" on both adapters, but this makes no difference. I've been messing around pretty much for 6 hours now and am getting quite fustrated by this! (my original aim was to get media sharing working, but I've pretty much abandoned that for now). Any ideas?

  Read the article

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >