Search Results

Search found 2303 results on 93 pages for 'niall smart'.

Page 71/93 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

• Flash Backed Write Cache (FBWC) without capacitor pack

  - by Martyn

  I brought a HP Smart Array P410 controller and it is installed and working fine in a HP Prolient Microserver with 4 drives in two RAID 1 arrays. I didn’t realise however that it came without any cache so would only work by directly writing straight to the disk, and the performance was horrible. So I then brought the 512MB Flash Backed Write Cache (FBWC) memory module as I was under the impression that with FBWC I would not need a battery. I got this idea from a forum post. "What do you guys think of the choice between 'BBWC' (battery backed write cache) and 'FBWC' (flash backed write cache)? The flashed based ones use non-volitile memory so need no battery." After installing the cache module however the server pretty much won’t boot. The P410 has a flashing amber light on it, and from the manual that doesn’t sound good. I’ve managed to get to the on board BIOS once and even managed to get to boot to the HP Array Configuration Utility (ACU) CD once, but every other time the Server continuingly reboots once it get to the POST screen and reads ARRAY INITILIZING %%%. The one time I reached the ACU, it reported a problem with the Cache Module. To me, it seems like the cache module is faulty, however the supplier tells me “Do you have an FBWC battery pack, p/n 587324-001, because that is required for the cache to work. If you have it, please complete an RMA form and we'll send a replacement / credit.” Does this sound right to you? I’ve been ordering the parts from the US and I don’t want to spend $77 + $40 p&p on a battery, wait a week for the shipping to find the card is faulty, and I don’t want to send back a working card?

  Read the article

• Automated Syslog Error Solution Finder

  - by Dru

  Any automated syslog solution finding frameworks? I want my central syslog server to email a list of problems, their severity and suggested solutions. There have been several questions about centralising system logs and alternative log analysis systems, but I don't get the impression that any of them help with issue resolution. A little background: At work I am now literally doing the work of two people, and both jobs have expanded beyond their initial frameworks. It is not so bad as I have helpers, but they are little more than smart monkeys. While one of my predecessors [I have two, that is how I know I have the jobs of two people] set-up logwatch to email its results out, my monkeys don't have the skills necessary to identify unimportant data. This has caused all of them, and myself sadly, to setup email filters and ignore the whole thing until something goes "bang". It would be handy to have someone else tell them what is important, what is connected, and to suggest a few ways to resolve the issue (I could train then to research the solution first, ha!). My reading of the Splunk and Octopussy sites indicates that I still need to bring my own highly trained monkey to the party. Which I am several years from having.

  Read the article

• How to configure default text selection behavior in Windows XP, 7? (eg. mouse click selects entire word vs. mouse click inserts an active cursor)

  - by Mouse of Fury

  I find the mouse click behavior of Windows XP and Windows 7 annoying and intrusive. I don't remember Windows NT being quite this bad, or MacOS 7 - 10 which I used in the nineties. When I'm using a browser and I click on a text field - for example, the address bar, or a search box - the first thing which happens is the entire field is selected.Subsequent clicks seem to select parts of words, often deciding arbitrarily to exclude or include adjacent punctuation. The same in Excel and other apps, and when trying to rename files, so I'm assuming this behavior comes from a system-wide text handling routine. I frequently want to edit text, cut out or replace odd parts of the insides of words or chunks of sentences, and often find that to get a simple cursor to insert I have to click the mouse up to 4 times in succession. I've had to do a lot of this recently and it has been driving me insane. Is there a place at the system level where this can be configured? In a perfect world, I'd like a single click on a new text area to insert a cursor point, and a rapid double click to select the entire area. Words or text within the area could be selected by inserting a cursor, holding down the mouse button and dragging to the exact point where I want the selection to end - even if that's in the middle of a word. No, I don't need or want Windows to "smart select" a word or sentence for me. I've looked in the Mouse and Accessibility Options control panels (Windows XP). Haven't found anything even close. Thanks -

  Read the article

• Managing Internal Yum Repository Groups

  - by elmt

  What is the best method for handling yum groups dependencies? For example, take this comps.xml file <comps> <group> <id>production</id> <name>Production</name> <default>true</default> <description>Packages required to run</description> <uservisible>true</uservisible> <packagelist> <packagereq type="default">ssh</packagereq> </packagelist> </group> <group> <id>development</id> <name>Development</name> <default>false</default> <description>Packages required to develop</description> <uservisible>true</uservisible> <packagelist> <packagereq type="default">gcc</packagereq> </packagelist> </group> </comps> which is packaged with createrepo -g comps.xml x86_64. The ssh and gcc rpms are not installed in the x86_64 directory. If I run yum groupinstall development, yum is smart enough to pull the gcc package from the RHEL repo even though the groups are defined in my internal repository. However, is this the proper way of doing this, or should I copy the rpms to my local repository and recreate the repo?

  Read the article

• How to verify TRIM/discard on encrypted swap?

  - by svarni

  I am using an encrypted swap partition via ecryptfs-setup-swap on my Ubuntu 13.04 computer using a SSD. I have manually set up trim for my ext4 root partition (simply by adding the "discard" option in /etc/fstab). I also manually ran fstrim on the root partition prior to booting and using dstat I saw that for a few seconds several GB/s of data have been written to the disk. That was presumably the effect of the trim command. These high writerates are reproducable by deleting huge files and have not occured before setting up trim, so I take them as evidence for working trim/discard. Manually enabling trim on my root partition has stopped the wearout of my precious new disk from 365 used reserved blocks (out of 6176 total) within three months down to 0 additional used reserved blocks within three additional months (data from SMART attributes). Because I want to minimize the wearout of my SSD I now would like to know whether my swap partition (which is encrypted using ecryptfs-setup-swap) also makes use of the trim/discard option. I tried sudo swapon -d -v /dev/mapper/cryptswap1 but did not receive particular information ("-v") about whether trim/discard ("-d") was applied. If unsupported, i would expect a message. Then I tried sudo dd if=/dev/sda6 count=1 BS=1M | xxd | less directly after booting and when no swapspace was used but I saw not only zeroes. I assume, when looking at freshly trimmed regions, the disk would send zeroes instead of reading random sectors (and according to some forums, (unencrypted) swap space is trimmed once upon boot). Long story short: Are there any ideas on how to test if trim is effectively used for my encrypted swap? And if not, any ideas on how to - at least manually, for once - trim the whole swap space? I wouldn't want to tinker with the partition itself, because I dont know if it needs to be reinitialized as (encrypted) swap - I dont want to be left with an unbootable system :)

  Read the article

• Fixed ruby/mysql connection with new libmysql.dll, and broke Apache in the process

  - by jmtoporek

  Ok so bit of background - all my development has been on a local Windows 7 machine. I had Apache with PHP/MySQL running with no issues. Been using ruby (1.9.3 and latest rails release 3.2.9) with built in webrick server, but had a devil of a time connecting to mysql. Did some research, updated my libmysql.dll file in c:/ruby/bin and it worked! Very happy... except now Apache stopped working. In my attempt to resolve the issue I found an older copy of libmysql.dll, renamed the new file, copied the old file back to c:ruby/bin and apache works, ruby does not. So I can take this ass backwards approach but obviously this seems pretty stupid. I was surprised that Apache was using the dll file in ruby/bin folder. I presume this is related to path variables perhaps? I guess I was hoping someone could direct me as to how I can use one dll file for apache and another for ruby. Or if you have some other smarter approach - I've smart enough to follow directions to install apache from scratch and enable php on windows as well as ubuntu, but I'm not much of a sys admin, just a semi competent web developer.

  Read the article

• How can I make the Firefox Password Manager more intelligent?

  - by Philip

  I have two major gripes about the FF password manager: If I restore a session with multiple tabs with sites with saved passwords, the master password prompt pops up once for each of them, even if I correctly enter the password the first time. Sometimes I want Firefox not to use my saved passwords at all (e.g. because I want to let someone else use it without getting access to my accounts), but hitting cancel results in erratic behavior--sometimes the box just pops up again and again, or sometimes it stops and behaves as I wish (continuing to browse w/o my passwords) until it encounters another site that wants my password. Thus even when hitting cancel does leave me free to browse passwordless, it doesn't get Firefox to leave me alone for the whole session. Thus: do you know of any tweak or add-on that could (1) make Firefox smart enough to get my master password once and then leave me alone, and/or (2) add an option (checkbox-style, toggle button, etc.) to browse "for now" (until I toggle the option) or even "for this session" (until I restart) without using any of my saved passwords? I'm running Firefox 3.5.6 on Mac OS X 10.5; thanks.

  Read the article

• Cloning a failing disk (Win 7)

  - by daveh551

  I have a Windows 7 machine with several partitions on a 1.5T drive. Windows has been complaining about disk errors and imminent failure, so I have purchased a new 2TB drive. The failing disk has not completely failed, and, in fact, I was able to boot Windows from it (after a couple tries) and examine the SMART logs - the only RED item was 1 sector being reallocated. But when I try to Clone it to the new Drive using Acronis True Image Home (2010), True Image can see the drive, the partitions, and the contents, but when it goes to actually do the clone, it says "Failed to move. Make sure the destination disk is not smaller than the source disk, and that there are not errors on the disk" (or something like that). What are some other options for simply cloning the failing drive. I'd like to clone the entire disk, but am willing to do it partition by partition if necessary. Was this a known failing of the 2010 edition of ATI, or is it really something hosed in my system. Would upgrading to the 2012 edition be likely to work any better? (I'd download the trial and try it out, but if I remember right, the cloning operation is disabled in the trial version), and I don't have enough free disk space to make an entire image.) What are some other cloning software packages if ATI won't work? Note that I'm only looking to clone the disk, not make an image as a back up - I use Ghost for that, and can fall back to that if I have to. It looks to me like CloneZilla would do the job. Any recommendations? Thanks, and if this duplicates other questions, I apologize.

  Read the article

• Write once, read many (WORM) using Linux file system

  - by phil_ayres

  I have a requirement to write files to a Linux file system that can not be subsequently overwritten, appended to, updated in any way, or deleted. Not by a sudo-er, root, or anybody. I am attempting to meet the requirements of the financial services regulations for recordkeeping, FINRA 17A-4, which basically requires that electronic documents are written to WORM (write once, read many) devices. I would very much like to avoid having to use DVDs or expensive EMC Centera devices. Is there a Linux file system, or can SELinux support the requirement for files to be made complete immutable immediately (or at least soon) after write? Or is anybody aware of a way I could enforce this on an existing file system using Linux permissions, etc? I understand that I can set readonly permissions, and the immutable attribute. But of course I expect that a root user would be able to unset those. I considered storing data to small volumes that are unmounted and then remounted read-only, but then I think that root could still unmount and remount as writable again. I'm looking for any smart ideas, and worst case scenario I'm willing to do a little coding to 'enhance' an existing file system to provide this. Assuming there is a file system that is a good starting point. And put in place a carefully configured Linux server to act as this type of network storage device, doing nothing else. After all of that, encryption on the files would be useful too!

  Read the article

• How does Safari's Reader work and when does it show up?

  - by TestSubject528491

  Safari's Reader feature is a cool little app that displays a web page as a newspaper article --- without all the distracting sidebars, comments, and ads. Sometimes it works and sometimes it doesn't, and I'm wondering how "it knows when to show up." On my personal website, one of the pages has this option. You can click the Reader button in the URL bar and it is displayed beautifully like a page in an iBook. However, none of my other web pages (on the same site) do this. I thought it had something to do with the <article> tag, but I removed that and it still works. Anyone know how this app works? Also, does anyone know of any Chrome extensions that are just like this? Google Reader is not the same thing. PS: From the cited Apple website: Safari Reader As you browse the web, Safari detects if you are on a web page with an article. Click the Reader button that appears in the Smart Address Field and an elegant view of the article appears — without any distracting content. Not much help, is it?

  Read the article

• How do I make a PPT file as small as possible?

  - by grunwald2.0

  Currently I am agonizing over several large presentation files, which I happened to reprint to PDFs... One thing I wondered: Do PPT's (from Microsoft Powerpoint) always to have to be that big? And what would be the strategies to make a PPT smaller? (If we say "ceterus paribus" at e.g. 25 slides and assuming that one isn't allowed to use a cloud-based service like GDocs, rocketslide or Prezio.) Of course there are the obvious "bad guys": Images and graphics. But: How about roll-over animations etc, who knows how much space they take? How about "smart arts"? Could one save file size if one would use "Open Office" or "Libre Office" Impress? (I didn't try it yet.) And "what if": What if we need to include e.g. five images (or charts that can't be remade in Excel in time), how would we best reduce the file size impact of those five images, if we needed to? I ask all this from an honest "business" perspective. I am no nerd or "Microsoft MVP" and I don't intend on delving into LATeX or similar yet. But that doesn't mean that I am not curious and very willing to learn. I am basically interested in (proven) best practices. Yes I know this question is lacking "initial research", but I think the perspective of my question is interesting and unique to a lot of people and if we intend to make SE a "Q&A" / Wiki kind-of reference site, this question might be a good way to "collect" advice on a question that has a very defined goal: Minimum file-size.

  Read the article

• Windows 7 doesn't start anymore

  - by 0xFF

  I've experienced some BSOD on windows 7 RC, and some freezing when startup, but today was big surprise, it doesn't start anymore. I tried to start on safe mode and no results too, it shows the starting animation, then a blue screen for less than a second and turns off immediately. The only thing I remember did today is update flash player under Firefox, then chrome stopped working even after logging off, and once restarting, it doesn't start anymore. Anyone experienced the same issue? any hints? [EDIT 3] Solved : Windows 7 have a very smart repair strategy, it works automatically, and it tried every possible fix, what fixed my problem was the system restore to a previous date, all this happened automatically. [EDIT2] these are the last lines in the ntbtlog.txt file Did not load driver \SystemRoot\System32\drivers\vga.sys Loaded driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Loaded driver \SystemRoot\system32\drivers\CHDRT32.sys Loaded driver \SystemRoot\system32\DRIVERS\VSTAZL3.SYS Loaded driver \SystemRoot\system32\DRIVERS\VSTDPV3.SYS Loaded driver \SystemRoot\system32\DRIVERS\VSTCNXT3.SYS Loaded driver \SystemRoot\system32\drivers\modem.sys Loaded driver \SystemRoot\system32\DRIVERS\usbccgp.sys Loaded driver \SystemRoot\System32\Drivers\usbvideo.sys [edit] this is the BSOD I get : http://twitpic.com/i87cx Thank you.

  Read the article

• Limited user requires admin rights for plug and play printer?

  - by Kalamane

  I have a small fleet of laptops that aren't part of a domain running Windows XP Pro SP3 as limited users. They are used for printing different shipping documents. I have a script that runs when they start up that uses devcon and prntmngr to detect and install/configure the currently connected usb printers. This lets us deploy the laptops to any printing station with a USB printer and have the printer 'just work' for the end user employee. I've taken the original clone image and have added functionality to it. Since then I've discovered a bit of an issue with using HP LaserJet P1606dn printers. They have started asking for admin rights on setup. This is with and without the script running. Previously they would automatically install because I had installed WHQL plug and play drivers for them. I thought it might have to do with the HP Smart Install Utility but it happens when that is disabled. I don't have a good point to roll back to before this started happening because this was an issue on the image I took initially to start this upgrade. What could be causing this?

  Read the article

• FTP Server upload and filesystem questions

  - by Alex

  I'm a photographer who mainly does event photography. A while ago I bought myself a Nikon WT-4 wireless transmitter, a small device which connects via USB to my Nikon D700 DSLR, and then establishes a WiFi connection to an existing WLAN. It can then upload any pictures I take via FTP to an FTP server somewhere in the network. On my laptop I then have a piece of software which will check a given folder on the disk regularly, this software is smart enough to look at the modified file timestamp, if this timestamp is less than 10 seconds ago, it will not attempt to import the folder and skip the file in this iteration of the import scan. The problem I've discovered seems to be inherent to the FTP protocol, as I have the same problem with Windows 7 built in IIS server, as I do with FileZilla FTP server. When the transmitter starts to upload a file, the FTP server will create a small 300-500 KB file with the correct filename on the disk, but then do nothing with the file until it has completely received the file via FTP. So it seems to create this small dummy file, and then buffer the remainder of the FTP upload until it's finished, and then dump the rest of the file into the dummy file making it the correct size. Problem is, these uploads take about 15-30 seconds depending on reception, but since the folder watch tool will already try to import any file older than 10 seconds, it will always try to import the small dummy files which obviously fails as they're not copmlete yet. Is there any way to 'disable' this behaviour? Ideally I would like my file only to show up once it's been completely uploaded. Or perhaps someone knows another FTP server application (it has to run on win7) which does not show this behaviour?

  Read the article

• Network bandwidth usage dashboard?

  - by SkippyFlipjack

  I have a couple of wifi access points hooked up to my home network, one of which I keep unsecured for some development I do; there are only a couple other homes within range and they've got their own wifi so it's not a big concern. I also have a Sonos system, Tivo, Roku, a couple laptops, a couple phones, an iPad and a desktop machine, all of which are internet-smart. So when my internet bandwidth tanks and it takes five minutes to load a YouTube video, I want to know what's going on, and there are many potential culprits. I'd like to be able to plug my MacBook into the primary router and see a nice little dashboard of the units on the network and what kind of bandwidth each is using at that moment. I could figure this out from WireShark or tcpdump but figure there has to be an easier way. I've tried a few different commercial products but none really presented the right info. Suggestions? (This may be a question for superuser since my Apple Time Capsule's SNMP capabilities are limited, but I figure admins of small business networks would have dealt w/ the same issue..)

  Read the article

• HP DL380 G3 2U For Basic Web Server in 2012

  - by ryandlf

  I have an opportunity to pick up a used HP DL380 G3 2U for $100. I'm looking for a basic entry level web server that I can host a small - medium size website on and more or less learn the ins and outs of running my own web server before I bite the bullet and spend a couple grand on a server. The specs are: Dual (2) Intel Xeon 2.4GHz 400MHz 512KB Cache 4GB PC2100 ECC Registered Memory 6 x 72GB 10K U320 SCSI Hard Drives Smart Array 5i RAID Controller Redundant Power Supplies DVD/Floppy, Dual Intel GB NIC's, USB Or would I be better off spending a couple hundred bucks on something like: this new HP Seems like the only major difference is SATA and a bit of storage, but I will likely be implementing a separate storage system of some sort anyways. I guess it also wouldn't hurt to mention that I plan on running a linux server distro, so would the hardware be likely to support linux with a system that is 4 generations old? I don't mind spending a couple hundred extra dollars if its a better solution, but as mentioned previously I am simple looking for a server to learn on and probably use for a year or so while I put together a small - medium size website.

  Read the article

• Bypass insane corporate security system

  - by user1665154

  I'm searching for a posibility to bypass the "Firewall" for 3-4 days. I've tried everything I know, so I ask here for a answer. We have no admin rights and the OS is Windows Vista There is an HTTP Proxy with NTML Authentication (only way to access the internet) It requires a username and password We use smart cards, in fact I have only a user number and a pin. Port 80 and 443 are open - I have an SSH server at home which is listening on port 443 The problem is that I need this proxy to connect to anything. Internet access only works in IE, Chrome, Firefox when I set the proxy settings to "use system proxy settings", "proxy-autoconfig (proxy.pac)" or when I enter the proxy inside the proxy.pac file. However I can't understand where they take the username and password which the Proxy requires. What I've tried was using cntlm to connect to the proxy with authentication (altought I have no PW and username) and PuTTY to create the SSH tunnel over port 443 whit the SOCKS Proxy which I've created with cntml. I've never found some SSH client which includes a "use system proxy settings" function.

  Read the article

• How can I extract data from Toshiba Satellite with a dead Windows installation?

  - by msanford

  I've got a Toshiba Satellite (unknown model number but bought early 2010) running Windows Vista which throws a kernel error on boot. We don't have the restore/recovery CD any more to restore the Windows partition. I have managed to boot to a Live CD version of Ubuntu 10.10 and have mounted the internal hard drive (which takes nearly 8 minutes). I suspect that the hard drive is malfunctioning, however, because copy tasks of even 30 megs of data to an attached and mounted USB flash drive takes over an hour, and some files are mysteriously inaccessible (not a permissions issue). When browsing folders, it takes many minutes to populate the folder window even with a single tiny file. During the copy tasks, the hard disk sounds like it tries to sleep several times in rapid succession, then continues accessing, it sounds, at full throughput. I initially tried using scp (from the shell) to copy data but I encountered the same local problems. I don't know the S.M.A.R.T. status of the hard disk, either. Is there a more effective way of going about recovering the data on the internal disk, assuming that I can't use a recovery CD and am too cheap to bring it in (for now, at least)?

  Read the article

• Where can someone store >100GB of pictures online? [closed]

  - by sbi

  A person who is not very computer-savvy needs to store 130GB of photos. The key parameters are: an non-negligible probability that the company selling the storage will be existing, and the data accessible, for at least five years data should be considered safe once uploaded reasonable terms of service: google drive reserving the right to literally do anything they want with their user's data is not acceptable; the possibility that the CIA might look at those pictures is not considered a threat easy to use from Windows, preferably as a drive no nerve-wracking limitations ("cannot upload 10GB/day" or "files 500MB" etc.) that serve no purpose other than pushing the user to the next-higher price plan some upgrade plan: there's currently 10-30GB of new photos per year, with a tendency to increase, which might bust a 150GB limit next January ability to somehow sort the pictures: currently they are sorted into folders, but something alike (tags) would be just as good, if easy enough to apply of course, the pricing is important (although there's a reason this is the last bullet; reasonable data safety is considered more important) Nice to have, but not necessary features would be: additional features related to photos (thumbnail generation, album sharing etc.) access from web and other platforms than Windows (smart phones) Let me stress this again: The person in need of that is able to copy pictures from the camera to the computer, can copy files in the explorer, and uses a web email service. That's about it, there's almost no understanding of what happens under the hood.

  Read the article

• Corsair SSD appears completely blank and does not retain written data

  - by ebanders

  I have a 180GB Corsair SSD (model# CSSD-F180GB2-BRKT) as the primary drive in a Windows laptop. Recently the machine became unbootable after installing Windows updates. Windows installed updates before the machine shut down and the next time the machine boot up it complained about not being able to find a bootable device. After finding fixmbr unsuccessful at making the machine unbootable, I investigated a little within knoppix. Fdisk revealed an empty partition table. A scan by Testdisk came up empty. And finally 'head -c 1024 | hd' reveals all zeros. Creating a primary partition spanning the whole disk completes successfully, but after a reboot the disk appears empty again. dmesg reveals no read or write errors. smartctl indicates that the drive is healthy- although the SMART attribute values do not appear to be read properly. "Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO" and "Threshold Page | INCONSISTENT IDENTITIES IN THE DATA" messages appear within the table of values. I don't have much experience with SSDs. Is this drive dead or something? Can anyone recommend any diagnostic tools that may be suited for diagnosing SSDs?

  Read the article

• Should I update the kernel on a Linux machine?

  - by Legate

  As I understand it, updating to a new kernel (with the normal linux-image... package, not by rolling my own) requires a server restart. However, one of our servers (Ubuntu 10.04) is running several extensive screen sessions. Restarting kills those which is always a major hassle to their owners (mostly because of lost session histories). What should I do? I see several possibilites: Not doing anything, that is update only non-kernel packages (perhaps use apt-pinning?) Update the kernel, but not restart. (Is that smart? I seem to remember there might be some problems with loading kernel modules.) Updating the kernel and restarting. Is there perhaps some way to preserve the screen sessions? I guess it ultimately boils down to this question: How important is it to update the kernel? I posted this question here instead of askubuntu.com as I think this is not an Ubuntu-specific issue though this server is running Ubuntu.

  Read the article

• Cheated!! Please help

  - by Rohit K

  I was experiencing some hard disk problem with my HP laptop. It showed at bootup as system diagnostics are run -- Smart Drive attribute failed. Also i repeatedly got a warning for imminent hard drive failure and thus to back up my data. So i gave my laptop to authorized HP service center for repair. They formatted my hard disk and installed a pirated copy of Win 7 Ultimate (i earlier had genuine Win 7 Home Premium running on my laptop) and they told me they cover out-of-warranty issues and even charged me for it. What's worse is that the hard drive problem is still present and all i am left with is an illegal copy of windows which i think also voids my warranty. What should i do? I mean i did purchase a genuine Windows with my laptop, so there must be some way to reinstall it even when i don't have a genuine copy now on my machine. Can't i get legit keys to reinstall Win 7 from Microsoft because i did pay for the software when i purchased my machine. And if that's not possible, how can i claim warranty and get my hard disk replaced by HP?

  Read the article

• Win7 taskbar freezes on startup for about 1-2 mins

  - by Mike

  Running Win7 64-bit for about 4 months now. Never had this problem, didn't install anything new recently. When I boot up I can't do anything in the taskbar, it's frozen for about 1-2 minutes then everything is normal. I can right click on my desktop and move my mouse around. This randomly just started happening a couple days ago after a reboot. I have a 3.2ghz quad, SSD, 4 gig ram, etc. and it usually starts up quickly. After some troubleshooting (including running antivirus and Anti-Malware), it doesn't appear to be software related, but appears to be services related. I can boot up in safe mode and safe mode with networking just fine. I can also boot up normally with all my regular software loading at startup, BUT with all my services turned off. Now the odd part. When I run msconfig to disable all the services at startup and go through ticking them on 5-10 at a time or so and booting up it seems to be somewhat random. Ticking everything on from "Application Experience" halfway down to about "Quality Windows Audio Video Experience" and I can boot without the 1-2 min. freeze. Then I start ticking the stuff below that from a couple of Remote Accesses to Smart Card and Task Scheduler, etc. But the weird part is sometimes it will freeze sometimes it won't. I can't narrow it down. Then if it freezes, I'll boot up in safe mode and turn the ones I just turned on back off and I'll reboot normally but it will freeze again. Which makes no sense because that configuration just worked without freezing just before. I got frustrated enough that I backed up and wiped my hard drive (formatted and everything) and reinstalled Win7 but when I booted up, the freeze happened again. Any ideas? Thanks in advance.

  Read the article

• Disk (EXT4) suddenly empty without any sign of why

  - by Ohnomydisk

  I have a Ubuntu 10.04 server with several disks in it. The disks are setup with a union filesystem, which presents them all as one logical /home. A few days ago, one of the disks appears to have suddenly 'become empty', for lack of better explanation. The amount of data on the /home mount almost halved within minutes - the disk appears to have had just over 400 GB of data prior to 'becoming empty'. I have absolutely no idea what happened. I was not using the server at the other time, but there are half a dozen other users who may have been (without root access and without the ability to hose a whole disk). I've ran SMART tests on the disk and it comes back clean. The filesystem checks fine (it has 12 GB used now, as some user software continued downloading after the incident). All I know is that around around midnight on October 19, the disk usage changed dramatically: The data points are every 15 minutes, and the full loss occured between captures: 2012-10-18 23:58:03.399647 - has 953.97/2059.07 GB [46.33 percent] 2012-10-19 00:13:15.909010 - has 515.18/2059.07 GB [25.02 percent] Other than that, I have not much to go off :-( I know that: There's nothing interesting in log files at that time Nobody appeared to be logged in via SSH at the time it occured (most users do not even use SSH) The server was online through whatever occured (3 months uptime) None of the other disks were affected and everything else on the server looks completely normal I have tried using "extundelete" on the disk and it didn't really find anything (some temporary files, but they looked new anyway) I am completely at a loss to what could have caused this. I was initially thinking maybe root escalation exploit, but even if someone did maliciously "rm" the disk contents, it would take more than 15 minutes for 400 GB?

  Read the article

• SMTP Server setting on Windows 2008 R2

  - by user223298

  I am very very new to this and just trying to configure SMTP virtual server. I have followed a few threads to get it all running, but the mails are not being delivered. What I have done so far - 1) Install SMTP server. 2) SMTP server Properties General Tab - IP address is set to 'All Unassigned'. Access Tab - Authentication is anonymous access. Everything else is left to Default settings. Delivery Tab - Outbound security is anonymous access. In Advance section, entered the domain name in the FQDN field, and localhost in Smart host field. 3) Created an Inbound Rule for SMTP service to allow connections to Port 25. When I try to telnet, everything works up until the point the mail has to be send. Now, the sender's domain is different to the receiver's domain. Not sure if settings have to be changed to allow that? I had set the Relay restrictions on SMTP server, but because I couldn't send the mails, I thought I might as well make it work without the relay first. The error I see while sending the mail is 451 Timeout waiting for client input. I used to get some other error before when I had Relay restrictions on. Can anyone please point me in the right direction? Please let me know if you need more information. Thanks.

  Read the article

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >