Search Results

Search found 2848 results on 114 pages for 'nor'.

Page 71/114 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

• Toshiba wireless is blocked

  - by zorrillo

  I have the same problem, a 32 bits toshiba nb255, it first had the windows 7 bu next I installed the ubuntu 11.04. The wifi does not turn on. I used the following issues the commands rfkill unblock wlan0, sudo ifconfig wlan0 down; they were not able. by setting up the bios in advanced menu, the wireless communication sw in ON, but it did not work also. neither the utilities toshiba nor utilities of ubuntu (wicd, wifi radar). by using gedit to file group, nothing. by installing madwifi packet, nothing. by exporting the wifi driver from windows to ubuntu, by means of the NDISwrapper packet, neither. I put the current scripts of the ouput of the cli root@zorrillo:~# rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes root@zorrillo:~# sudo lspci | grep Atheros 07:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) root@zorrillo:~# root@zorrillo:~# ifconfig -a eth0 Link encap:Ethernet direcciónHW 88:ae:1d:47:df:e1 ACTIVO DIFUSIÓN MULTICAST MTU:1500 Métrica:1 Paquetes RX:0 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:0 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:1000 Bytes RX:0 (0.0 B) TX bytes:0 (0.0 B) Interrupción:43 Dirección base: 0xe000 lo Link encap:Bucle local Direc. inet:127.0.0.1 Másc:255.0.0.0 Dirección inet6: ::1/128 Alcance:Anfitrión ACTIVO BUCLE FUNCIONANDO MTU:16436 Métrica:1 Paquetes RX:8 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:8 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:0 Bytes RX:480 (480.0 B) TX bytes:480 (480.0 B) ppp0 Link encap:Protocolo punto a punto Direc. inet:189.203.115.236 P-t-P:192.168.226.1 Másc:255.255.255.255 ACTIVO PUNTO A PUNTO FUNCIONANDO NOARP MULTICAST MTU:1500 Métrica:1 Paquetes RX:6384 errores:30 perdidos:0 overruns:0 frame:0 Paquetes TX:6893 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:3 Bytes RX:5473081 (5.4 MB) TX bytes:974316 (974.3 KB) wlan0 Link encap:Ethernet direcciónHW 00:26:4d:c3:d0:44 DIFUSIÓN MULTICAST MTU:1500 Métrica:1 Paquetes RX:0 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:0 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:1000 Bytes RX:0 (0.0 B) TX bytes:0 (0.0 B) note.-it is logical all the counters are cero if the wireless device is down root@zorrillo:/home/zorrillo/Descargas/802BGA# ifconfig wlan0 up SIOCSIFFLAGS: Operation not possible due to RF-kill root@zorrillo:/home/zorrillo/Descargas/802BGA# It would seem the wireless switching does not react with whichever ubuntu 11.04 command (I hope to be wrong). The target remains the same, in order of the scripts above. I am worried, I have tried to find any answer for days and nights. Toshiba does not supply drivers or soft support for linux, marketing of course. I only see the device is up by protocols and down phisically, My question is, is it possible to enable or not shutdown physically the device?, because in the toshiba model nb255 the wifi is not set up/down bye means of a physical switch, but by means a combination of Fn + F8 (only for windows 7, no one more), Is there one possibility to configure the hot keys in ubuntu?

  Read the article

• Strategy for avoiding duplicate object ids for data shared across devices using iCloud

  - by rmaddy

  I have a data intensive iOS app that is not using CoreData nor does it support iCloud synching (yet). All of my objects are created with unique keys. I use a simple long long initialized with the current time. Then as I need a new key I increment the value by 1. This has all worked well for a few years with the app running isolated on a single device. Now I want to add support for automatic data sync across devices using iCloud. As my app is written, there is the possibility that two objects created on two different devices could end up with the same key. I need to avoid this possibility. I'm looking for ideas for solving this issue. I have a few requirements that the solution must meet: 1) The key needs to remain a single integral data type. Converting all existing keys to a compound key or to a string or other type would affect the entire code base and likely result in more bugs than it's worth. 2) The solution can't depend on an Internet connection. A user must be able to run the app and add data even with no Internet connection. The data should still resolve properly later when the data syncs through iCloud once a connection is available. I'll accept one exception to this rule. If no other option is available, I may be open to requiring an Internet connection the first time the app's data is initialized. One idea I have been toying around with in my head is logically splitting the integer key into two parts. The high 4 or 5 bits could be used as some sort of device id while the rest represents the actual key. The fuzzy part is figuring out how to come up with non-conflicting device ids that fit in a few bits. This should be viable since I don't need to deal will millions of devices. I just need to deal with the few devices that would be shared by a given iCloud account. I'm open to suggestions. Thanks.

  Read the article

• How can I tweak this A* search pathfinding algorithm to handle different terrain movement values?

  - by user422318

  I'm creating a 2D map-based action game with similar interaction design as Diablo II. In other words, the player clicks around a map to move their player. I just finished player movement and am moving on to pathfinding. In the game, enemies should charge the player's character. There are also five different terrain types that give different movement bonuses. I want the AI to take advantage of these terrain bonuses as they try to reach the player. I was told to check out the A* search algorithm (http://en.wikipedia.org/wiki/A*_search_algorithm). I'm doing this game in HTML5 and JavaScript, and found a version in JavaScript: http://www.briangrinstead.com/blog/astar-search-algorithm-in-javascript I'm trying to figure out how to tweak it though. Below are my ideas about what I need to change. What else do I need to worry about? When I create a graph, I will need to initialize the 2D array I pass in passed on with a traversal of a map that corresponds to the different terrain types. in graph.js: "GraphNodeType" definition needs to be modified to handle the 5 terrain types. There will be no walls. in astar.js: The g and h scoring will need to be modified. How should I do this? in astar.js: isWall() should probably be removed. My game doesn't have walls. in astar.js: I'm not sure what this is. I think it indicates a node that isn't valid to be processed. When would this happen, though? At a high level, how do I change this algorithm from "oh, is there a wall there?" to "will this terrain get me to the player faster than the terrain around me?" Because of time, I'm also debating reusing my Bresenham algorithm for the enemies. Unfortunately, the different terrain movement bonuses won't be used by the AI, which will make the game suck. :/ I'd really like to have this in for the prototype, but I'm not a developer by trade nor am I a computer scientist. :D If you know of any code that does what I'm looking for, please share! Sanity check tips for this are also appreciated.

  Read the article

• Why are MVC & TDD not employed more in game architecture?

  - by secoif

  I will preface this by saying I haven't looked a huge amount of game source, nor built much in the way of games. But coming from trying to employ 'enterprise' coding practices in web apps, looking at game source code seriously hurts my head: "What is this view logic doing in with business logic? this needs refactoring... so does this, refactor, refactorrr" This worries me as I'm about to start a game project, and I'm not sure whether trying to mvc/tdd the dev process is going to hinder us or help us, as I don't see many game examples that use this or much push for better architectural practices it in the community. The following is an extract from a great article on prototyping games, though to me it seemed exactly the attitude many game devs seem to use when writing production game code: Mistake #4: Building a system, not a game ...if you ever find yourself working on something that isn’t directly moving your forward, stop right there. As programmers, we have a tendency to try to generalize our code, and make it elegant and be able to handle every situation. We find that an itch terribly hard not scratch, but we need to learn how. It took me many years to realize that it’s not about the code, it’s about the game you ship in the end. Don’t write an elegant game component system, skip the editor completely and hardwire the state in code, avoid the data-driven, self-parsing, XML craziness, and just code the damned thing. ... Just get stuff on the screen as quickly as you can. And don’t ever, ever, use the argument “if we take some extra time and do this the right way, we can reuse it in the game”. EVER. is it because games are (mostly) visually oriented so it makes sense that the code will be weighted heavily in the view, thus any benefits from moving stuff out to models/controllers, is fairly minimal, so why bother? I've heard the argument that MVC introduces a performance overhead, but this seems to me to be a premature optimisation, and that there'd more important performance issues to tackle before you worry about MVC overheads (eg render pipeline, AI algorithms, datastructure traversal, etc). Same thing regarding TDD. It's not often I see games employing test cases, but perhaps this is due to the design issues above (mixed view/business) and the fact that it's difficult to test visual components, or components that rely on probablistic results (eg operate within physics simulations). Perhaps I'm just looking at the wrong source code, but why do we not see more of these 'enterprise' practices employed in game design? Are games really so different in their requirements, or is a people/culture issue (ie game devs come from a different background and thus have different coding habits)?

  Read the article

• Calculating a circle or sphere along a vector

  - by Sparky

  Updated this post and the one at Math SE (http://math.stackexchange.com/questions/127866/calculating-a-circle-or-sphere-along-a-vector), hope this makes more sense. I previously posted a question (about half an hour ago) involving computations along line segments, but the question and discussion were really off track and not what I was trying to get at. I am trying to work with an FPS engine I am attempting to build in Java. The problem I am encountering is with hitboxing. I am trying to calculate whether or not a "shot" is valid. I am working with several approaches and any insight would be helpful. I am not a native speaker of English nor skilled in Math so please bear with me. Player position is at P0 = (x0,y0,z0), Enemy is at P1 = (x1,y1,z1). I can of course compute the distance between them easily. The target needs a "hitbox" object, which is basically a square/rectangle/mesh either in front of, in, or behind them. Here are the solutions I am considering: I have ruled this out...doesn't seem practical. [Place a "hitbox" a small distance in front of the target. Then I would be able to find the distance between the player and the hitbox, and the hitbox and the target. It is my understanding that you can compute a circle with this information, and I could simply consider any shot within that circle a "hit". However this seems not to be an optimal solution, because it requires you to perform a lot of calculations and is not fully accurate.] Input, please! Place the hitbox "in" the player. This seems like the better solution. In this case what I need is a way to calculate a circle along the vector, at whatever position I wish (in this case, the distance between the two objects). Then I can pick some radius that encompasses the whole player, and count anything within this area a "hit". I am open to your suggestions. I'm trying to do this on paper and have no familiarity with game engines. If any software folk out there think I'm doing this the hard way, I'm open to help! Also - Anyone with JOGL/LWJGL experience, please chime in. Is this making sense?

  Read the article

• password incorrect 3 times + suspected failed update

  - by Cheese

  I have been lurking your site for the past few hours, and have found myself in a bit of a pickle. Visiting my parents, I discover that neither computer, nor laptop work. Long story short, I've got the laptop working, but have completely fudged up the computer. I am a n00b, but I was at least willing to give it a go. The comp originally had ubuntu 11.10 installed, later updated to 12.04. We have cds for both. I do not understand what the initial problem was for my parents, but somehow when I turned on the computer, it worked for me. Soon after, I was nagged to install the latest updates. So, I spent the next half an hour wondering why the updates kept on asking for 11.04 cdroms, until I realised that you could turn off the cdrom necessity. After doing this via console, I installed some of the smaller updates, before being told to do a partial update. This failed a few times, and ended up freezing whilst reinstalling drivers. After a hard restart I continued to type whatever I could find on the forum into the console. At some point, the console started saying that I had 3 incorrect password inputs, and sudo commands stopped altogether. I found another thread discussing this; but people kept on suggesting changing passwords (which I did to no avail) or other things that made use of sudo (which I am locked out of, although I am technically the admin) I found myself somehow on the Ctrl+Alt+F1 console, and after being utterly confused (and Ctrl+AltF5 failing for me), another hard reset occurred. Somewhere along the way I created a USB start up for 14.04, (but this does not seem to work) Now I am left with an admin (and guest) account that log in but have blank screens (with only the desktop background showing) and I can't do anything in the console because I'm locked out. Interestingly, the console now says that I am running 14.04 although all updates said they had failed. Aside from the obvious lessons I have learnt (don't fiddle about in the console when you have no idea what you're doing "Dog wearing safety glasses "I have no idea what I am doing" GIF would be inserted here ) Is there any way I can redeem this almighty muck up? A million thanks for any help!

  Read the article

• A better way to organize your Silverlight Code Snippets.

  - by mbcrump

  I hate re-writing code. I also hate it when I find a great code snippet on the web and forget to bookmark it or it gets lost in my endless sea of bookmarks. So what do you do to get around this? This is the question that I was asking myself at the end of 2010. How can I get my Silverlight code organized? My requirements for a snippet manager were: Needs to be FREE. An easy way to view XAML/C# code behind together in one “view”. I wanted the ability to store the code snippets in cloud in case my HDD dies. Searchable Keywords to quickly find code snippets. I started looking for a snippet manager that would allow me to do just that and finally found Snippet Manager. Before going any further, I think that one of the most important things to note here is that this software supports 37 languages. It’s not just for Silverlight developers nor C# only guys. The software supports Java, SQL and even COBOL.   Below is a screenshot of the Snippet Manager that shows my Silverlight code snippet. You will notice that I have highlighted two sections. The top part is my XAML and the bottom is my C# code behind. I’ve included a sample below of my code snippets so that you can get an idea of how I organized it. Another thing that’s great about this software is that it supports plain text. I added some connection strings in the TEXT section below.  Once you have finished adding your code snippets, you can store them in the cloud. I created a FTP directory called “snippets” on my FTP Server and hit the upload button once I am finished adding my new codes snippets. This will allow me to use the code snippets on another computer with this application on my USB Key. See screenshots below: Enter your FTP credentials below: Hit the Uploads button on the Toolbar: Login in to your FTP Server and verify the following files are now on the FTP Server: Another great feature of the Snippet Manager is that you can also integrate this into VS2010 by clicking Tools –> External Tools: And setting up your External Screen to point to the Executable: You can now launch it by going to Tools –> Snippet Manager. If you want you could also a shortcut to launch the program with HotKeys. As you can see, this is a nice little program that includes everything needed to organize your code snippets very clean. I didn’t go over every feature but this is something that you might want to download and give it a shot.  Subscribe to my feed CodeProject

  Read the article

• Looking for an algorithm to connect dots - shortest route

  - by e4ch

  I have written a program to solve a special puzzle, but now I'm kind of stuck at the following problem: I have about 3200 points/nodes/dots. Each of these points is connected to a few other points (usually 2-5, theoretical limit is 1-26). I have exactly one starting point and about 30 exit points (probably all of the exit points are connected to each other). Many of these 3200 points are probably not connected to neither start nor end point in any way, like a separate net, but all points are connected to at least one other point. I need to find the shortest number of hops to go from entry to exit. There is no distance between the points (unlike the road or train routing problem), just the number of hops counts. I need to find all solutions with the shortest number of hops, and not just one solution, but all. And potentially also solutions with one more hop etc. I expect to have a solution with about 30-50 hops to go from start to exit. I already tried: 1) randomly trying possibilities and just starting over when the count was bigger than a previous solution. I got first solution with 3500 hops, then it got down to about 97 after some minutes, but looking at the solutions I saw problems like unnecessary loops and stuff, so I tried to optimize a bit (like not going back where it came from etc.). More optimizations are possible, but this random thing doesn't find all best solutions or takes too long. 2) Recursively run through all ways from start (chess-problem-like) and breaking the try when it reached a previous point. This was looping at about a length of 120 nodes, so it tries chains that are (probably) by far too long. If we calculate 4 possibilities and 120 nodes, we're reaching 1.7E72 possibilities, which is not possible to calculate through. This is called Depth-first search (DFS) as I found out in the meantime. Maybe I should try Breadth-first search by adding some queue? The connections between the points are actually moves you can make in the game and the points are how the game looks like after you made the move. What would be the algorithm to use for this problem? I'm using C#.NET, but the language shouldn't matter.

  Read the article

• Reinstall Acer OEM Windows 8, Windows 8 Recovery for Acer Aspire V5 122p

  - by stwindr

  My Acer Aspire V5-122P-61456G50NSS, model - MS2377, has crashed all together. It came preloaded with Windows 8 and I upgraded to windows 8.1 3-4 days before crash. Unfortunately I did not make any recovery media before the crash. While accessing the eRecovery on Acer store with my PC's serial no. it says nor RCD available for this. I tried recovery by loading recovery manager (Left Alt + F10) Various other advanced startup options (like holding shift key while turning on or pressing F8 key) returns nothing but no luck. However I am able to enter BIOS. After doing research on above condition on various PC forums, now my questions: I read that a 'Windows Recovery Drive' can be made on any PC running Windows 8 and could be used to repair another PC. Does anybody in SuperUser community have that (or a link to download the same from somewhere? as I'm unable to find anybody running windows 8 among my friends). I downloaded a window 8 Pro ISO and made a bootable USB. I was able to go to 'Repair Your Computer' option and after going to 'Reset your PC' option found that my recovery partition has gone/missing. I tried all options available but no luck. Then I tried to install with that Windows 8 Pro ISO but got message: "The product key entered does not match any of the Windows images available for installation. Enter a different product key". before this message I did not got any form to fill product key! Does this mean that the installer was picking up the key from BIOS (OEM Key)? and may be the installation did not succeeded because OEM Windows version was Window 8 and I was trying to install Windows 8 Pro. If that is the case then, could somebody please send me link to download an Windows 8 ISO? I am helpless and couldn't find anywhere on internet (without having to pay for a new key, but I should not pay as the installer will use OEM key).

  Read the article

• multiple monitor, ATI EyeFinity vs NVidia Mosaic on HDMI

  - by user1531897

  i have been googling much for answer but only someone with real experience can help here. my aim is to have 5 monitors connected to one computer in 2x2 full screen on all 4 monitors (video wall) with same resolution, 4xfullHD for example, plus one -5th monitor as controling. Ati have example picture of this configuration here. I have no gaming nor 3d needs here. Simple desktop applications plus video streams. So because graphic cards for this are expensive, i need to find out before buying pros and cons of 2 possible solutions (1) Ati Eyefinity capable card(s) ...and (2) Nvidia Quadro/NVS card(s) with mosaic and/or nvidia surround technology. For example i can find that current good cards for this can be: Ati's 7870 eyefinity6 card, link here pros: one card can handle all 5 displays, cons: active DP adapters needed (sometimes with aditional usb-powering complication) Nvidia Qudro NVS 450, link here Both cards have DisplayPorts as outputs (my targets are HDMI displays), but as far i saw information is that Eyefinity needs "active DP-DVI/hdmi adapters" for outputs and they are little expensive...? Does nvidia have this limitation (active adapters) ??? And final question, is Ati Eyefinity still better for this purpose than Nvidia-mosaic by someone's real experience there.

  Read the article

• Outlook 2007 Backup to D:\Outlook Fails - Access Denied, Write-Protected or File In Use

  - by nicorellius

  I can successfully save the Outlook PST file to the default location on the C drive (C:\Documents and Settings\user\ ... \Outlook) but when I change the backup save to directory to Outlook on the D drive I get the error: Cannot copy Outlook: Access is denied. Make sure the disk is not full or write protected and that the file is not currently in use. I suppose it is not that crucial that I save this file here, but I have never seen this problem before and I have made this same change in the past. I did some searching in this knowledge exchange as well as elsewhere on changing permissions, etc, but this didn't help. I discovered that the folder on my D drive (called Outlook) is not write-protected and nor is it read-only, as I can save to and modify files in that directory, as well as rename and delete the directory itself. At the time when I installed this version of Outlook, I used a previously saved Personal Folder (a backup PST file) and I thought having this still open in Outlook was causing the trouble. But I closed it and still have the same problem. I know this is probably a silly error on my part but I would like to figure it out. I'm new to superuser, but the answers I see are usually very good, so I thought I would post my first question. Thanks in advance.

  Read the article

• Motherboard HDDPWR1 connector

  - by Eric Leschinski

  I need help identifying the name of a connector. I have a Gateway DX4870-UB318 computer, I opened the case and wanted to attach another hard drive, but to my surprise one existing SATA hard drive was connected to the motherboard with this connector: And here is the spot on the Motherboard where the power was supplied. What is the name of this adapter and where can I get another one? Clues: This computer was bought new October 2013 from best buy, box number: DX4870-UB318. The gateway folks won't divulge the type of motherboard it has nor give specs on it. On the wire itself is an identification code: H.35090NJ01-000 Next to the connector on the motherboard it says: HDDPWR1 and the second one says HDDPWR2. This cable has two SATA power connectors and one mystery connector. The power supply has no molex power cables and no SATA power connectors! This is the most bizarre hard drive power system I've seen. I guess the motherboard folks are trying to remove the burden for desktop power supplies to provide adapters (molex, SATA, other) to CD's and hard drives. Can someone put a name on that white flat 6 pin HDD Power Connector? My Solution I can buy a "SATA Power Y Splitter Cable" to provide more spaces to power sata devices.

  Read the article

• Windows 2008, IIS7 and virtual directories

  - by Thomas

  I created a virtual directory called test (C:\test) under the Default Web Site and added two simple test files (one html and one aspx). I thought I had to add the IUSR and NetworkService (for application pools) to C:\test and grant the users appropriate rights in order for IIS7 to serve the content. It appears that is not the case at all as I can view any files in the virtual directory (even if I convert it to an application) without changing or adding any security settings on the C:\test folder. I just installed IIS7 with ASP.NET on Windows 2008 without changing any settings besides adding the virtual directory. Am I missing something? Even my book on IIS7 states that the user accounts should be added an appropriate rights should be added. I added the following to answer the comments: I am referencing the file using a public IP http://xxx.xxx.xxx.xxx/test/one.html and the IP nor localhost is in my trusted sites. I am not signed in on the server at all as I am accessing the content from my home machine and the content is on my production server. The following users/groups have access to c:\test on the server (Creator Owner, System, Administrators, Users) and the app pool is running under the default NetworkService account. I basically installed win2008, added the IIS role with asp.net. I then opened IIS7, added a virtual directory and copied two files to the directory to test. It works which is great but I want to understand why it works. How is it that IIS7 can access files in the C:\test folder without any permissions set.

  Read the article

• syspolicy_purge_history generates failed logins

  - by jbrown414

  I have a development server with 3 instances: Default, A and B. It is a physical server, non clustered. Whenever the syspolicy_purge_history job runs at 2 am, I get failed login alerts. Looking at the job steps, all are successfully completed. It appears that some point during the step "Erase Phantom System Health Records" is when the failed logins occur. syspolicy_purge_history on instance B works OK. syspolicy_purge_history on the Default instance seems to want to connect to instance B, resulting in: Error: 18456, Severity: 14, State: 11. Login failed for user 'Machinename\sqlsvc-B'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: <local machine>] . No errors are reported by Powershell. syspolicy_purge_history on the A instance seems to want to connect to the Default instance resulting in Error: 18456, Severity: 14, State: 11. Login failed for user 'Machinename\sqlsvc-Default'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: <local machine>] . Then it tries to connect to the B instance, resulting in Error: 18456, Severity: 14, State: 11. Login failed for user 'Machinename\sqlsvc-B'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: <local machine>] . No errors are reported by Powershell. I tried the steps posted here hoping they would fix it. http://support.microsoft.com/kb/955726 But again, this is not a virtual server nor is it in a cluster. Do you have any suggestions? Thanks.

  Read the article

• How to execute msdb.dbo.sp_start_job from a stored procedure in user database in sql server 2005

  - by Ram

  Hi Everyone, I am trying to execute a msdb.dbo.sp_start_Job from MyDB.dbo.MyStoredProc in order to execute MyJob 1) I Know that if i give the user a SqlAgentUser role he will be able to run the jobs that he owns (BUT THIS IS WHAT I OBSERVED : THE USER WAS ABLE TO START/STOP/RESTART THE SQL AGENT SO I DO NOT WANT TO GO THIS ROUTE) - Let me know if i am wrong , but i do not understand why would such a under privileged user be able to start/stop agents . 2)I know that if i give execute permissions on executing user to msdb.dbo.Sp_Start_job and Enable Ownership chaining or enable Trustworthy on the user database it would work (BUT I DO NOT WANT TO ENABLE OWNERSHIP CHAINING NOR TRUSTWORTHY ON THE USER DATABASE) 3)I this this can be done by code signing User Database i)create a stored proc MyDB.dbo.MyStoredProc ii)Create a certificae job_exec iii)sign MyDB.dbo.MyStoredProc with certificate job_exec iv)export certificate msdb i)Import Certificate ii)create a derived user from this certificate iii)grant authenticate for this derived user iv)grant execute on msdb.dbo.sp_start_job to the derived user v)grant execute on msdb.dbo.sp_start_job to the user executing the MyDB.dbo.MyStoredProc but i tried it and it did not work for me -i dont know which piece i am missing or doing wrong so please provide me with a simple example (with scripts) for executing msdb.dbo.sp_start_job from user stored prod MyDB.dbo.MyStoredProc using code signing Many Many Many Thanks in Advance Thanks Ram

  Read the article

• iSCSI errors continue after removing inaccessible target portal

  - by Ansgar Wiechers

  By mistake I entered an iSCSI target portal address in the iSCSI Initiator on one of our virtual servers that does not have an address in the network range used for iSCSI. This caused the following errors/warnings to appear in the eventlog: Log Name: System Source: MSiSCSI Event ID: 113 Level: Warning Description: iSCSI discovery via SendTargets failed with error code 0xefff0003 to target portal *192.168.23.42 0003260 Root\ISCSIPRT\0000_0 . Log Name: System Source: iScsiPrt Event ID: 1 Level: Error Description: Initiator failed to connect to the target. Target IP address and TCP Port number are given in dump data. Log Name: System Source: iScsiPrt Event ID: 70 Level: Error Description: Error occurred when processing iSCSI logon request. The request was not retried. Error status is given in the dump data. So far that's expected beahvior, so I removed the portal from the iSCSI Initiator as described in MSKB 976072. However, the errors/warnings keep appearing every hour, even though neither iSCSI Initiator GUI nor iscscli show any portals: C:\>iscsicli ListTargetPortals Microsoft iSCSI Initiator Version 6.1 Build 7601 The operation completed successfully. The problem persists after rebooting the server. Uninstalling the Microsoft iSCSI Initiator device via devmgmt.msc as well as changing the Initiator parameters like this: [HKLM\SYSTEM\CurrentControlSet\Control\Class\{4D36E97B-E325-11CE-BFC1-08002BE10318}] "MaxPendingRequests"=dword:00000001 "MaxConnectionRetries"=dword:00000001 "MaxRequestHoldTime"=dword:00000005 didn't help either. Each change was followed by a reboot. Disabling the device does prevent the errors/warnings from re-appearing, of course, but I'd rather not have to resort to this. How can I prevent those errors and warnings from appearing (short of disabling the initiator device or re-installing the server)? What am I missing? Environment: The virtual machine runs on a Hyper-V cluster managed by SCVMM 2012. Hosts and guests run Windows Server 2008 R2 SP1. The physical machines are Dell PowerEdge M710HD blades.

  Read the article

• Weird "missing" CD/DVD driver during Windows Server 2008 installation

  - by Django Reinhardt

  Hi. We have an old PowerEdge 860 that we're trying to install Windows Server 2008 R2 onto. At present the machine doesn't have any OS installed, so we're doing a clean install from a DVD. Pretty simple stuff. The problem is that, although the installation process starts off well (asking for language and locale settings), as soon as we click "Install Now" we're told "A required CD/DVD device driver is missing." The operating system has already booted from our only DVD drive(!). I've seen other people complain about this problem (usually in relation to installing Vista or Windows 7) but I've not found a 100% solution yet. (Our DVD drive is a Hitachi LG GWA-4400N, salvaged from an old laptop. There have never been any drivers released for this device, nor any firmware updates.) The most promising lead I have is from someone claiming that Windows is actually asking for a driver for the ATAPI/IDE Controller here. UPDATE See my answer below... It was most likely a corrupt download. (*shame*) I will update this question when I know for sure.

  Read the article

• Error 0x80300001 Installing Windows Server 2008 R2 64bit on FastTrak TX4660 RAID volume

  - by Konstantin Boyandin

  I am trying to install Windows Server 2008 R2 Enterprise 64bit on the following hardware: motherboard Intel DBS1200BTL Promise FastTrak TX4660 RAID controller 4 disks set up in two RAID1 arrays (handled by FastTrak) I am trying to install Windows so it would boot from RAID1 volume created with the FastTrak controller. The installation goes as in the manual, I insert the disk with the driver, select 'Browse' and specify the correct driver, it finds all the RAID arrays but notifies me that error 0x80300001 happened, Windows can't be installed on the mentioned RAID volumes, since they may not be bootable (even though the target RAID volume is the first in boot options list). If I proceed with the installation, Windows copies and unpacks itself, performs other standard actions after that. After the computer is restarted, it won't boot (Windows Boot Manager appears in the boot devices list; however, neither it nor the RAID volume itself does not boot). Is it a known problem? I can attach the boot disks to the motherboard and use its RAID capabilities instead, but I'd prefer FastTrak ones. Driver version is 1.3.0.4. Thanks.

  Read the article

• Disabling standby modus on Gear4 Blackbox speakers

  - by cj

  I have a set of bluetooth Gear4 Blackbox speakers. The sound quality and the design is great, but it switches to standby modus automatically every now and then, when I am listening to music and when it's silent. In that situation, the only way to get them working again is turning them off and on, since they do not react to the remote nor to the buttons on top of it. I emailed Gear4 with this problem and they recommended me to reflash the firmware again, but the problem is persisting after having done that. It has nothing to do with the device that is streaming music. So, the question is, is there a way to disable the standby modus permamently, so the speakers are all the time active even if I am not using them? To switch them off I would just turn the power switch off. If anyone is curious about what device I am talking about, here's a link to Amazon, but I wouldn't reccomend anyone to buy them because of this problem. http://www.amazon.co.uk/Gear-4-PG142-GEAR4-BlackBox/dp/B000QEFZI2 Thanks in advance.

  Read the article

• mysqld crashes on any statement

  - by ??iu

  I restarted my slave to change configuration settings to skip reverse hostname lookup on connecting and to enable the slow query log. I edited /etc/my.cnf making only these changes, then restarted mysqld with /etc/init.d/mysql restart All appeared to be well but when I connect to msyqld remotely or locally though it connects okay a slight problem is that mysqld crashes whenever you try to issue any kind of statement. The client looks like: Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 3 Server version: 5.1.31-1ubuntu2-log Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> show tables; ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... Connection id: 1 Current database: mydb ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... ERROR 2003 (HY000): Can't connect to MySQL server on 'xx.xx.xx.xx' (61) ERROR: Can't connect to the server ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... ERROR 2003 (HY000): Can't connect to MySQL server on 'xx.xx.xx.xx' (61) ERROR: Can't connect to the server ERROR 2006 (HY000): MySQL server has gone away Bus error The mysqld error log looks like: 101210 16:35:51 InnoDB: Error: (1500) Couldn't read the MAX(job_id) autoinc value from the index (PRIMARY). 101210 16:35:51 InnoDB: Assertion failure in thread 140245598570832 in file handler/ha_innodb.cc line 2595 InnoDB: Failing assertion: error == DB_SUCCESS InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html InnoDB: about forcing recovery. 101210 16:35:51 - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=3 max_threads=600 threads_connected=3 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x18209220 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f8d791580d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f902a76a080] /lib/libc.so.6(gsignal+0x35) [0x7f90291f8fb5] /lib/libc.so.6(abort+0x183) [0x7f90291fabc3] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x41b) [0x781f4b] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f902a7623ba] /lib/libc.so.6(clone+0x6d) [0x7f90292abfcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x18213c70 = thd->thread_id=3 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 101210 16:35:51 mysqld_safe Number of processes running now: 0 101210 16:35:51 mysqld_safe mysqld restarted InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 101210 16:35:54 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 101210 16:35:56 InnoDB: Started; log sequence number 456 143528628 101210 16:35:56 [Warning] 'user' entry 'root@PSDB102' ignored in --skip-name-resolve mode. 101210 16:35:56 [Warning] Neither --relay-log nor --relay-log-index were used; so replication may break when this MySQL server acts as a slave and has his hostname changed!! Please use '--relay-log=mysqld-relay-bin' to avoid this problem. 101210 16:35:56 [Note] Event Scheduler: Loaded 0 events 101210 16:35:56 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.31-1ubuntu2-log' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 101210 16:36:11 InnoDB: Error: (1500) Couldn't read the MAX(job_id) autoinc value from the index (PRIMARY). 101210 16:36:11 InnoDB: Assertion failure in thread 139955151501648 in file handler/ha_innodb.cc line 2595 InnoDB: Failing assertion: error == DB_SUCCESS InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html InnoDB: about forcing recovery. 101210 16:36:11 - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=600 threads_connected=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x18588720 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f49d916f0d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f4c8a73f080] /lib/libc.so.6(gsignal+0x35) [0x7f4c891cdfb5] /lib/libc.so.6(abort+0x183) [0x7f4c891cfbc3] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x41b) [0x781f4b] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f4c8a7373ba] /lib/libc.so.6(clone+0x6d) [0x7f4c89280fcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x18599950 = thd->thread_id=1 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 101210 16:36:11 mysqld_safe Number of processes running now: 0 101210 16:36:11 mysqld_safe mysqld restarted The config is [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] innodb_file_per_table innodb_buffer_pool_size=10G innodb_log_buffer_size=4M innodb_flush_log_at_trx_commit=2 innodb_thread_concurrency=8 skip-slave-start server-id=3 # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /DB2/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 128K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP max_connections = 600 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 32M # skip-federated slow-query-log skip-name-resolve Update: I followed the instructions as per http://dev.mysql.com/doc/refman/5.1/en/forcing-innodb-recovery.html and set innodb_force_recovery = 4 and the logs are showing a different error but the behavior is still the same: 101210 19:14:15 mysqld_safe mysqld restarted 101210 19:14:19 InnoDB: Started; log sequence number 456 143528628 InnoDB: !!! innodb_force_recovery is set to 4 !!! 101210 19:14:19 [Warning] 'user' entry 'root@PSDB102' ignored in --skip-name-resolve mode. 101210 19:14:19 [Warning] Neither --relay-log nor --relay-log-index were used; so replication may break when this MySQL server acts as a slave and has his hostname changed!! Please use '--relay-log=mysqld-relay-bin' to avoid this problem. 101210 19:14:19 [Note] Event Scheduler: Loaded 0 events 101210 19:14:19 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.31-1ubuntu2-log' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 101210 19:14:32 InnoDB: error: space object of table mydb/__twitter_friend, InnoDB: space id 1602 did not exist in memory. Retrying an open. 101210 19:14:32 InnoDB: error: space object of table mydb/access_request, InnoDB: space id 1318 did not exist in memory. Retrying an open. 101210 19:14:32 InnoDB: error: space object of table mydb/activity, InnoDB: space id 1595 did not exist in memory. Retrying an open. 101210 19:14:32 - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=600 threads_connected=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1328077 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x1753c070 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x7f7a0b5800d0 thread_stack 0x20000 /usr/sbin/mysqld(my_print_stacktrace+0x29) [0x8b4f89] /usr/sbin/mysqld(handle_segfault+0x383) [0x5f8f03] /lib/libpthread.so.0 [0x7f7cbc350080] /usr/sbin/mysqld(ha_innobase::innobase_get_index(unsigned int)+0x46) [0x77c516] /usr/sbin/mysqld(ha_innobase::innobase_initialize_autoinc()+0x40) [0x77c640] /usr/sbin/mysqld(ha_innobase::open(char const*, int, unsigned int)+0x3f3) [0x781f23] /usr/sbin/mysqld(handler::ha_open(st_table*, char const*, int, int)+0x3f) [0x6db00f] /usr/sbin/mysqld(open_table_from_share(THD*, st_table_share*, char const*, unsigned int, unsigned int, unsigned int, st_table*, bool)+0x57a) [0x64760a] /usr/sbin/mysqld [0x63f281] /usr/sbin/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x626) [0x641e16] /usr/sbin/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5db) [0x6429cb] /usr/sbin/mysqld(open_normal_and_derived_tables(THD*, TABLE_LIST*, unsigned int)+0x1e) [0x642b0e] /usr/sbin/mysqld(mysqld_list_fields(THD*, TABLE_LIST*, char const*)+0x22) [0x70b292] /usr/sbin/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x146d) [0x60dc1d] /usr/sbin/mysqld(do_command(THD*)+0xe8) [0x60dda8] /usr/sbin/mysqld(handle_one_connection+0x226) [0x601426] /lib/libpthread.so.0 [0x7f7cbc3483ba] /lib/libc.so.6(clone+0x6d) [0x7f7cbae91fcd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd->query at 0x1754d690 = thd->thread_id=1 thd->killed=NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash.

  Read the article

• Find a non-case-sensitive text string within a range of cells

  - by Iszi

  I've got a bit of a problem to solve in Excel, and I'm not quite sure how to go about doing it. I've done a few searches online, and haven't really found any formulas that seem to be useful. Here's the situation (simplified just a bit, for the purpose of this question): I have data in columns A-E. I need to match data in the cells in A and B, with data in C-E, and return TRUE or FALSE to column F. Return TRUE if: - The string in A is found within any string in C-E. OR - The string in B is found within any string in C-E. Otherwise, return FALSE. The strings must be exact matches for whole or partial strings within the range, but the matching function must be case-insensitive. I've taken a screenshot of an example sheet for reference. I'm fairly sure I'll need to use IF or on the outermost layer of the formula, probably followed by OR. Then, for the arguments to OR, I'm expecting there will be some use of IFERROR involved. But what I'm at a loss for is the function I could most efficiently use to handle the text string searches. VLOOKUP is very limited in this regard, I think. It may be workable to do whole-string against whole-string comparisons, but I'm fairly certain it won't return accurate results for partial string matches. FIND and SEARCH appear limited to only single-target searches, and are also case-sensitive. I suppose I could use UPPER or LOWER to force case-insensitivity in the search, but I still need something that can do accurate partial matching and search a specified range of cells. Is there any function, or combination of functions, that could work here? Ideally, I want to do this with a straight Excel formula. I'm not at all familiar with VBScript or similar tools, nor do I have time to learn it for this project.

  Read the article

• Problem with MS DTC on SQL2008 win server 2k8 with linked server from sql2000 win server 2k

  - by user31648

  Hi, We have migrated our db from sql2000 win server 2k to sql2008 win server 2k8. We have linked server from sql2000 win server 2k. By our opinion the problem is with DTC and we have made a lot of setting that we found as solution for our problem, but still the problem exist. There is no any error or worning or information niether in the sql log nor in win event viewer. The application is hanging out and at the end the time out exception is shown. What we have done till now: Enable Network DTC Access with inbound and outbound with No Authentication Required on win 2k8 We have opened RPC dynamic port allocation through registry on 2k and 2k8 We have entered subkey TurnOffRpcSecurity in the registry HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSDTC and made it enable on 2k and 2k8 We have added exception for DTC in firewall for all entities What we have notice that when we restart SQL service and make the first try for our transaction the following is shown: "Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required." and after it: "Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required." Does someone have any idea what else can be done in order to solve the problem? Thanks in advance. Regards, Snezana

  Read the article

• How to auto-mount encfs volume on login in ubuntu 9.10

  - by xzenox

  Hi, Previously, in 9.04, I was using pam mount in conjunction with encfs to mount an encrypted volume at login. This worked perfectly and since the password was the same as my user password, none was entered besides the initial login one. Now in 9.10, using the same setup and the same volume line in pam's config file, the volume will not mount. The folder does not even get created for the mount point. I am thinking this might be caused by the fact that I now switched to using an encrypted /home directory (previously left unencrypted on 9.04). To encrypt it, i used the standard /home encrypt setup from the 9.10 fresh install. I am thinking that perhaps, pam tries to mount the volume before /home is mounted and fails. Is there a log file I could look into/post here? Note that mounting manually works fine using the same paths, writing full paths does not help, nor is removing the options attribute. Here's my volume entry: <volume user="nicholas" fstype="fuse" path="encfs#~/.dropbox_dir/Dropbox/encrypted" mountpoint="~/Dropbox" options="nonempty" />

  Read the article

• What is causing random hard freezes on my system? Kaspersky?

  - by Christian Ivicevic

  The last few weeks I experienced a new strange behavior of my computer. Sometimes Windows 7 just freezes with no real reason at all. While listening to music for example the playback hangs and you can hear a very nasty sound. Neither mouse nor keyboard input is handled and everything is just stuck. Using Ubuntu this does not happen, so I think it is just a matter of driver issues or a Windows 7 bug. Furthermore I am really suspicious about Kaspersky (Internet Security 11) and so I let it perform a complete virus scan while no other app is running. At about 50% it happened again and I needed to restart the computer by holding the power button the bad way... A really weird thing is that playing Skyrim this happened once, however music playback did not stop. Only the framerate dropped to 0 and sometimes for a few seconds I am able to move. Therefore I am really confused as furthermore no bluescreen pops up. Memtest told me that everything seems to be alright... Can anyone explain me which data you need about my hardware and software (and which tools tools to use to gather the informatik) to be able to provide any help on my problem?

  Read the article

• error in php not logging or displaying

  - by Grant M

  I can not get any errors to display on screen on write to a log file. When check phpinfo() print out I have same value of master a local for display_errors On display_startup_errors On error_log /var/log/php.log error_reporting E_ALL & ~E_NOTICE log_errors On log_errors_max_len ls -l /var/log/php.log is -rw-rw-rw- 1 root root 0 Jun 21 07:47 /var/log/php.log for /var and /varlog drwxrwxrwx 23 root root 4096 Jun 2 11:13 var when there is an error in the code the page the browsers shows nothing and browser says there is no source for the page. Any suggestions of where else to look or change to errors to appear somewhere (anywhere would be good) edit: my error script is now <?php ini_set('display_errors', 1); error_reporting(E_ALL); echo "print from error.php 2 "; error //print from erroerror to cuase logging to happen. ?> this will print on display and to log Notice: Use of undefined constant error - assumed 'error' in /var/www/piku_dev2/error.php on line 7 but if I put garbage like #@$%$ on the error line I get nor error messages anywhere. Edit2: The problem turned out to in the httpd.conf file. I don't know what it was yet as it was fixed y someone else.

  Read the article

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >