Search Results

Search found 2583 results on 104 pages for 'ping'.

Page 71/104 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

• User WinWget to keep web site alive in a Windows Server 2003

  - by Menelaos Vergis

  I have a site that must stay alive due to a service that runs and check a directory for changes. The site is running in IIS at a Windows Server 2003 and the solution I came up it that I will Schedule a task that requests the home page every 5 minutes. I am sure that this way the site will stay alive almost all the time. I have downloaded Wget from Wget from Windows and I have installed it at my windows server 2003 but I don't know how to use it in order to ping the server but not download anything. Since I want to use this forever I don't want to save anything on the disk, can you provide me with the command that pings a web page but don't save anything on the disk?

  Read the article

• How to reply some request from which routes its came from?

  - by tacoen

  I wonder if we can reply some request from which route its came from? My Situation is like this: eth0 192.168.10.1 --> gw: 192.168.10.254 nm: 24 eth1 192.168.11.1 --> gw: 192.168.11.254 nm: 24 Since this two IP is on the same machine, normally when we ping to 192.168.11.1 from 192.168.10.2. This machine will not reply to 192.168.10.2 because 192.168.10.0/24 it's on eth0, and the packets where requested via eth1. Can I make it works? I'm using Linux ubuntu, and the application will be listen to eth1 only.

  Read the article

• output redirection not happening completely

  - by Gaurav

  I am running the following command on ubuntu 12.04 bash shell: hping3 -S -p 80 -c 30 www.google.com >> outputfile.txt But the problem is that this leaves some lines in the end and doesn't copy in the file. I even tried hping3 -S -p 80 -c 30 www.google.com >> outputfile.txt 2>&1 It also gives same problem. However this works perfect: ping -c 30 www.google.com >> outputfile.txt Any idea about what I might be missing?

  Read the article

• Computer connects to lan, but not the internet

  - by Jay

  I have a computer with Vista Home that can connect to the router, but it cannot get on the internet. I cannot ping google.com, the request times out. I've tried this on two separate networks and have no trouble with other computers connecting. I've renewed ipconfig, reset winsock, updated the wireless adapter, and the hosts file looks fine. I've tried disabling the firewall as well as a direct wired connection. I did a scan with Norton and it didn't find anything. Is there anything else I can try before resorting to a system restore? Update (Copied from Answer) Windows Update was able to find updates and install them (though, they could have already been downloaded previously). When I pinged Google by using their IP 66.102.9.103, it said it lost 25 percent of the packets. I successfully flushed the DNS but it didn't help. Also, I found safe mode with networking works fine.

  Read the article

• Why can't I access the WebUI of my DNS-323 NAS after a firmware upgrade?

  - by anonymous2

  Hi Everyone, I just bought a D-Link DNS-323 NAS Enclosure, and have run into a problem. I read that the firmware that had shipped with (1.07) did not support 2TB drives, so I downloaded firmware 1.08. Turned on the device for thwe first time and went straight to the WebUI (everything looked/worked fine) Proceeded with the firmware update, completed successfully. Rebooted and I cannot access the WebUI. I can see the NAS connected via my router interface I can also ping the ip adress assigned, but I cannot access the WebUI or find it via D-Link easy search software. I have tried the factory reset button, but that does not seem to be doing anything, the square blue light just keeps flashing from the moment the unit is powered on, whether I press the reset button or not, and the symptoms remain the same... PS. I did/do not have any drives installed yet. Please help?

  Read the article

• Windows Internet Connection Issue (HELP)

  - by semajjames1399

  I have a windows 8 hp dual booting ubuntu. When i log onto windows i cant get on the internet... But skype and other applications can just now webpages in a browser what so ever (this is on windows 8). But on ubuntu i have no internet issues at all. From what i see right now its only the browsers in windows 8 that cant get the internet, and ive tried all the browsers i had (chrome, ie, firefox) and they cant connect but in the win8 notification area it says im connected. I can even ping via cmd. HELP! Thanks. Whats not working is that i cant get access the internet through the windows 8 broswer.

  Read the article

• How can I set an arbitrary (non default) attribute for an AD user or AD Contact?

  - by makerofthings7

  I have AD Users, or contacts that are not Exchange Mailbox users, or contacts. I also have a SSO system (Ping Identity... technology similar to Microsoft ADFS), where it leverages the AD Schema attribute: CustomAttribute1 to store information needed for SSO. This CustomAttribute1 was created by the Exchange Schema. I would like to use CustomAttribute1 for both AD Users and AD Contacts, as well as the Exchange equivalent user and contacts. Question Since the Exchange tools will only allow me to modify "Exchange" users, what is the way to modify the AD counterpart? e.g. if the following command sets a mailbox... set-mailbox -Identity [email protected] -CustomAttribute1 [email protected] -WarningAction silentlyContinue What command will allow me to update an AD user (non-mailbox) under the same schema attribute?

  Read the article

• Remote Desktop connection breaks the wireless connection

  - by Michal Talaga

  When I connect to my Windows 8 Professional machine via Remote Desktop (RDP) I almost always get my WiFi connection broken. The setup: T61P Lenovo Laptop + W8 at home Wireless Router with NAT forwards connections to that machine Windows 7 laptop at work connecting to the home laptop When I connect, very often I get to login and suddenly connection is lost and I cannot reconnect again. When I get home I find my WiFi connection is still connected to the Access Point but does not function. Can't even ping the router. What is strange is that disabling wireless with the hardware switch and enabling it again doesn't help. The only way to make it works again: - Reboot - Disable wifi with hardware switch AND disable the network card in Device Manager, then enable both I did not have this problem on the very same laptop when it was running Windows 7. Any hint how can I find where the problem is?

  Read the article

• What special configuration is needed to have a domain controller with DNS on a VM in Hyper-V?

  - by Michael J. Gray

  I have a server running Windows Server 2012 and it only has the Hyper-V role. I have a VM also running Windows Server 2012 and it has the Active Directory: Directory Services and DNS ([example.com]) roles. It has been promoted to a domain controller for [example.com]. In the virtualization host I have joined the domain successfully. On a laptop on the network, it can ping my DNS that is inside the VM on the virtualization host. However, it can't resolve anything through the DNS. I figured it was a firewall issue where the DNS had the firewall allow rule, but the virtualization host did not. I added that, but it didn't fix the issue. On my laptop, I get "UnKnown can't find [example.com]: No response from server" immediately. There's no time out, it just comes back right away. What have I overlooked?

  Read the article

• trying to set up wireless router, failing

  - by j j

  Hi, I am trying to set up Netgear's wireless-n WNR2000 router, following their oversimplified 5- step process for plugging in wires, and I'm not having any success. It comes down to: once everything is wired and turned on in the correct order, all of the LEDs match the image they give of 'what should be lit up', but their setup disk still doesn't find the router. They have a site to set up the router manually, www.routerlogin.net, which I cannot navigate to, even while wired directly to the router. http://192.168.1.1 doesn't connect to anything, either. The interesting part: i get ping replies from Google's DNS server at 8.8.8.8 while this is set up. but cannot connect to any web site by name, since the router's DNS isn't set up. One thought is that the router and modem both have the same IP address, so it's conflicting, but I'm not sure how I'd resolve that. Any ideas?

  Read the article

• DHCP server can't see other machines

  - by William

  Hi, I setup a private network from virtual machines and one of the machines is the DHCP server for the group. I want to specify a next-server for the DHCP server but I'm having trouble connecting to any of the machines that I lease IPs to. I'm just trying to do a simple ping/ssh to 10.0.0.252 (a machine with a lease) but it doesn't seem to respond. Any advice? I'm assuming I need to be able to connect to my next-server but maybe I'm wrong. Thanks.

  Read the article

• How to configure OpenVPN server to use custom default gateway?

  - by Arenim

  I have a vpn server at address 10.1.0.2 and the server have another ip in it's network -- 10.0.0.2 in his subnet (it's a tun2socks router). But default server's gateway is NOT 10.0.0.2 (and it's ok) but another external IP. I want all the client's traffic to be forwarded through this ip address -- 10.0.0.2. Here is part of my server's config: dev tap0 server-bridge 10.1.0.1 255.255.255.0 10.1.0.50 10.1.0.100 push "route 10.0.0.0 255.255.255.0" ; now client can ping 10.0.0.2 push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 10.1.0.1" push "dhcp-option WINS 10.1.0.1" in fact i want some like push "redirect-gateway 10.0.0.2" How can I achieve this?

  Read the article

• Can't connect to server from certain machines

  - by Joel Coel

  On a small college campus we have a VLAN setup for the computer labs. These machines get assigned IP addresses in the 192.168.7.xxx range. In the server room, all of the server are on the default VLAN and assigned an IP address in the 10.1.1.xxx range. For the most part this works, but the lab machines are unable to connect to one of the servers. They can't even ping it. They can talk to other servers on the same switch as this server just fine. At first I thought it might be a vlan issue, but I changed the server port vlan to match other known-working ports with no effect. Any ideas?

  Read the article

• Subdomain on a separate server (Windows/IIS) won't load default web site?

  - by DOTang

  I've got a domain hosted under godaddy.com. I set it up so that subdomain.mysite.com points to a different server which uses Windows/IIS (say for example ip 1.1.1.1). When I go to the subdomain I get no errors, but no webpage loads. In IIS under the default website I added a bindings for subdomain.mysite.com with the ip of 1.1.1.1, but still nothing loads, just a totally blank page. I know for sure the subdomain host is working correctly because when I ping my subdomain, the correct IP shows. What am I missing to get this working?

  Read the article

• ServerA can't access ServerB through UNC path. How do I troubleshoot?

  - by cparker4486

  All my servers are in the same domain on the same network. ServerA cannot access ServerB through UNC path. However DNS resolves correctly for ServerB from ServerA. For example "ping ServerB" works as expected. ServerB can reach ServerA through UNC path without any problem. Likewise all other servers and clients can reach ServerB through UNC path without any problem. The software firewall on ServerB is not turned on and there are no hardware firewalls getting in the way. This makes no sense and I don't know how to troubleshoot it. Nothing shows up in the event logs of ServerA and ServerB has one event (repeatedly): Event ID: 3019, Source: MrxSmb. ServerA is Server 2008 R2. ServerB is Server 2003 R2. I have other 2008 R2 servers that connect without any problem.

  Read the article

• Mac | Router not assigning the IP address.

  - by Vaibhav Bajpai

  I recently installed Mac OS X 10.6, however the ethernet state is down. The assigned IP is 169.x.x.x. When booted the live USB of Ubuntu, I properly get an IP assigned in the range 192.168.1.x from the router 192.168.1.1 I am using the same router and same ethernet line. I tried to ping to 192.168.1.1 from my Mac and I get a host down message. I tried to manually assign the IP and set the router IP to 192.168.1.1 but still the router is unreachable.

  Read the article

• How to set up VPN connection? Virtual Box 3.1.4 installed. Host - Snow Leopard(Mac) Guest - Windows 7 (32-bit)

  - by user31954

  I have Virtual Box 3.1.4 installed. Host - Snow Leopard(Mac) Guest - Windows 7 (32-bit). I have installed Windows on my MAC because I need it for work. I cannot establish VPN connection (using NAT). I tried to use bridged adapter, and I lost my internet connection on my guest(wind7) completely. I don't know much about networking, so I need detailed instructions for his particular OSs. Could someone please help me with this? Some random details about my attempts: On my host Windows I get error 800 trying to VPN. I can ping server address from my guest Win 7 and I have VPN connection established from my host Mac. I do disable VPN on my Mac when tying to establish it through guest. I tried to VPN from Mac and see if Guest sees it. It doesn't. Thank you!

  Read the article

• Server 2012r2 VPN DNS

  - by Tyron Gower

  Have an issue where onsite clients cannot resolve VPNusers. but VPN users can resolve onsite machines. example. USER! uses LAPTOP1 USER1 connects to VPN gets internal IP address of 10.243.0.200 USER1 pings SERVER1 - resolve to ip and gets reply USER1 RDP into SERVER1 (inside VPN) USER1 pings LAPTOP1 from SERVER1 resolves to ip address last assigned by DHCP (10.243.0.139) ping fails USER1 pings 10.243.0.200 from SERVER1 gets reply. Running Server 2012r2 It is a domain controller, DNS and VPN server. VPN is just configured with basic default settings. All VPN users have static IP setup in AD. Not sure where to go from here.

  Read the article

• How can I tell if a host is bridged and acting as a router

  - by makerofthings7

  I would like to scan my DMZ for hosts that are bridged between subnets and have routing enabled. Since I have everything from VMWare servers, to load balancers on the DMZ I'm unsure if every host is configured correctly. What IP, ICMP, or SNMP (etc) tricks can I use to poll the hosts and determine if the host is acting as a router? I'm assuming this test would presume I know the target IP, but in a large network with many subnets, I'd have to test many different combinations of networks and see if I get success. Here is one example (ping): For each IP in the DMZ, arp for the host MAC Send a ICMP reply message to that host directed at an online host on each subnet I think that there is a more optimal way to get the information, namely from within ICMP/IP itself, but I'm not sure what low level bits to look for. I would also be interested if it's possible to determine the "router" status without knowing the subnets that the host may be connected to. This would be useful to know when improving our security posture.

  Read the article

• Workgroup connection: You may not have permission

  - by Afiefh

  I have two Windows XP computers connected through an Ad-Hoc network, computer A creates the network and B connects to it. Both computers are on the Mshome network and have file and printer sharing enabled, and they can ping one another through the adhoc network. The result is that computer A can see computer B, but B cannot see A in the workgroup. But when A tries to access B I get a "you might not have permission to access" error telling me to contact the administrator. I tries to google the error, but most posts talk about problems connecting different versions of Windows to each other. I tried turning off the firewalls on both machines and checking if the required services are running. Nothing helped. Please excuse my ignorance on Windows networking, I haven't used Windows in around 10 years.

  Read the article

• Ubuntu Wired network(ethernet does not work)

  - by user36777

  It was working just fine, until the other day I yanked it out. The wireless works just fine on the same router. If I login to a windows 7 instance on this dual boot laptop then the ehternet works just fine. So it's not a hardware, cable or router issue. The card even gets an ip, but I can't connect to the internet. Here are the details from route, iptables, ifconfig, ping etc. Any ideas? I have been struggling with this for day, none seems to have an answer. http://pastie.org/954816

  Read the article

• How can I solve Windows PPTP VPN issues?

  - by Robin M

  I'm having persistent problems with Windows PPTP VPN connections. The VPN appears up whilst the tunnel won't transfer traffic (ping to a remote IP within the VPN works for a while, and then fails). The client receives routing information via DHCP. When the connection fails, the routing table is still correct so I don't think it's a routing problem. My internet connection is via an ADSL2 line. There's software to deal with PPTP problems, like TunnelRat, but I don't want to install v1.1 of the .NET framework and I'd rather get to the bottom of the problem (I have multiple VPN connections and some are more unreliable than others). What can I do to get to the bottom of this? Alternatively, what can I do to keep the connection alive?

  Read the article

• linux static ip problem

  - by out_sider

  I have a serve running centOS and I'd like to have the following setup: The server needs to have a static ip and be accessible by name. What I want is independently of the network being able to connect the server to the network and access it by name on Firefox as it will be running a web page. I tried setting the ip manually but while the inet addr is set as I want it the Bcast isn't. And I only can ping the server on the Bcast ip and because it is 192.168.2.255 ssh says it's not valid.

  Read the article

• Network share not always available

  - by CapSoft

  Hello everybody, we have a windows 2003 server with a shared directory. I've seen this thread but this wasn't any help: http://superuser.com/questions/58890/the-specified-network-name-is-no-longer-available I have a ping -t running from 3 pc's (vista and two windows 7) they all work. the things appear when two users enter the network share then this 'network share is no longer available' appears and the explorer windows turn white. after f5 or refresh the shared directory is back. this is really strange. there is no anti virus or kasparsky running on either end. this is all in a LAN. the internet connection is really stable, so it's really strange can it be a router issue? I have checked the eventlog on the server for diskfailure related messages, but there are none.

  Read the article

• Sync Linux to Windows 2003/2008 Natively

  - by user26753

  Without using any external packages for Windows, can Linux synchronise it's clock to a Windows 03/08 Server natively? I've tried it using various NTP packages for Windows but would like to use just Windows software for this. EDIT: I've tried the below however it doesn't work. I've put TimeSource in /etc/hosts, stated server TimeSource in /etc/ntp.conf however when I do a service ntpd start it doesn't sync (it's 3 minutes out at the minute). I then stopped the NTPD and did a ntpdate TimeSource, thinking it would sync and then I'd start the NTPD once it's got the time, and it says: no server suitable for synchronization found. Though I can ping it. Any thoughts?

  Read the article

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >