Search Results

Search found 2762 results on 111 pages for 'pm utils'.

Page 71/111 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

• Using NOPASSWD for specific commands in sudoers file, PASSWD for all others

  - by jberryman

  I would like to configure sudo such that users can run some specific commands without entering a password (for convenience) and can run all other commands by entering a password. This is what I have, but this does not work; a password is always required: Defaults env_reset Defaults timestamp_timeout = 1 root ALL=(ALL:ALL) ALL # Allow members of group sudo to execute any command %sudo ALL=(ALL:ALL) NOPASSWD: /usr/sbin/pm-suspend, /usr/bin/apt-get, PASSWD: ALL #includedir /etc/sudoers.d Note that this is a debian system which uses this adding users to the "sudo" group method. Thanks.

  Read the article

• Bridging Wireless and Wired Interfaces in Linux

  - by The Daemons Advocate

  My network setup is something like: Wireless Router <---> Netbook <---> Ubuntu Desktop ...or, more verbosely (with interfaces): Wireless Router <--(wireless)--> (eth2) Ubuntu Netbook Ubuntu Netbook (eth0) <---(wired)----> (eth0) Ubuntu Desktop In a perfect world, I'd have the desktop wired, but weird circumstances combined with my wanting to understand more about networking in linux make me want to figure out how to bridge these two devices. A bit of googling has given me this example using bridge-utils, and here's how I'm (failing) to setup the bridge (on the netbook): sudo -i ifconfig eth0 0.0.0.0 ifconfig eth2 0.0.0.0 brctl addbr bridget brctl addif bridget eth0 brctl addif bridget eth2 ifconfig bridget up ...then, trying to make sure that the netbook can still get on the internets... route add default gateway 192.168.2.1 dhclient bridget What happens after this is that the dhclient command above (netbook) doesn't get served an IP, and the Desktop, if I run dhclient, it doesn't get served an IP. Some weird considerations might be that I'm running the Network Manager Applet that comes with Ubuntu. While I'm sure I can get a command line wireless configuration setup, it's a bit complex. Can someone give me a shout as to where I'm going wrong? I'd also like to note another related question titled 'Bridging my laptop’s wireless and wired adaptors', however the setup is different to mine.

  Read the article

• Seeking free project planner with auto resource levelling

  - by mawg

  As the title says, I am seeking a project planner with automatic resource levelling. It must be free for commercial use and a bonus, but not requirement, would be MS project import/export. I like the look of Task Juggler, but it is at a stage of development hovering between v2 and v3. Anything else? Basically, I want to play "what if games" - I will determine the tasks and their effort, and the dependencies between them and then try to figure out how many staff I need. Since many of the tasks can be done in parallel, it is difficult to guess how many are needed. A PM tool with automatic resource levelling seems like a good way to find out.

  Read the article

• Bridging my laptop's wireless and wired adaptors

  - by stacey.richards

  I would like to be able to connect a desktop computer that does not have a wireless adapter to my wireless network. I could just run a network cable from my ADSL/wireless router to the desktop computer but sometimes this is not practical. What I would really like to do is bridge my laptop's wireless and wired adapters in such a way that I can run a network cable from my laptop to a switch and another network cable from the switch to a desktop computer so that the desktop computer can access the Internet through my ADSL/wireless router via my latop: +--------------------+ |ADSL/wireless router| +--------------------+ | +-------------------------+ |laptop's wireless adaptor| | | |laptop's wired adaptor | +-------------------------+ | +------+ |switch| +------+ | +-----------------------+ |desktop's wired adapter| +-----------------------+ A bit of Googling suggests that I can do this by bridging my laptop's wireless and wired adapters. In Windows XP's Network Connections I select both the Local Area Connection and the Wireless Network Connection, right click and select Bridge Connections. From what I gather, this (layer 2?) bridge will examine the MAC address of traffic coming from the wireless network and pass it through to the wired network if it suspects that a network adapter with that MAC address may be on the wired side, and vice-versa. If this is the case, I would assume that when the desktop computer attempts to get an IP address from a DHCP server (which is running on the ADSL/wireless router), it would send a DHCP broadcast packet which would pass through the laptop's bridge to the router and the reply would return through the laptop's bridge back to the desktop. This doesn't happen. With some more Googling I find some instruction how this can be done with Linux. I reboot to Ubuntu 9.10 and type the following: sudo apt-get install bridge-utils sudo brctl addbr br0 sudo brctl addif br0 wlan0 sudo brctl addif br0 eth0 sudo ipconfig wlan0 0.0.0.0 sudo ipconfig eth0 0.0.0.0 Once again, the desktop cannot reach the ADSL/wireless router. I suspect that I'm missing some simple important step. Can anyone shed some light on this for me?

  Read the article

• Why does 1GBit card have output limited to 80 MiB ?

  - by Gallus

  I'm trying to utilize maximal bandwidth provided by my 1GiB network card, but it's always limited to 80MiB (real megabytes). What can be the reason? Card description (lshw output): description: Ethernet interface product: DGE-530T Gigabit Ethernet Adapter (rev 11) vendor: D-Link System Inc physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 11 serial: 00:22:b0:68:70:41 size: 1GB/s capacity: 1GB/s width: 32 bits clock: 66MHz capabilities: pm vpd bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation The card is placed in following PCI slot: *-pci:2 description: PCI bridge product: 82801 PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: 92 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list The PCI isn't any PCI Express right? It's a legacy PCI slot? So maybe this is the reason? OS is a linux.

  Read the article

• How to detect/list rogue computers connected to a WIFI network without access to the Wifi Router interface?

  - by JJarava

  This is what I believe to be an interesting challenge :) A relative (that leaves a bit too far to go there in person) is complaining that their WIFI/Internet network performance has gone down abysmally lately. She'd like to know if some of the neighbors are using her wifi network to access the internet but she's not too technically savvy. I know that the best way to prevent issues would be to change the Router password, but it's a bit of a PITA having to re-configure all wifi devices... and if the uninvited guest broke the password once, they can do it again... Her wifi router/internet connection is provided by the telco, and remotely managed so she can log-on to their telco account's page and remotely change the router's Wifi password, but doesn't have access to the router status page/config/etc unless she opts out of the telco's remote support and mainteinance service... So, how could she check if there are guests in the wifi with this restrictions and in the most "point and click way"? In this case I'd probably use nmap to look for other devices in the network, but I'm not sure if that's the easiest way to do it. I'm not a wifi expert, so I don't know if there are any wifi-scanning utils that can tell us who's talking to the router... Lastly, she's a Windows user as I guess that'll influence the choice of tools available Any suggestions more than welcome Regards!

  Read the article

• CentOS iscsi initiator has session but there is no block device

  - by jcalfee314

  I have installed the scsi-target-utils package on CentOS and I used it to perform a discovery. The discovery did give me an active session. I restarted the iscsi service but I do not see any new devices (fdisk -l). I see in /var/log/messages that my connection is operational now. I'm not sure how to debug this further. Can someone direct me into fixing this? discovery: iscsiadm -m discovery -t sendtargets -p 192.168.0.155 returns: 192.168.0.155:3260,-1 iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3 Just to verify it actually worked: iscsiadm -m session returns tcp: [1] 192.168.0.155:3260,1 iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3 restarting as the directions say to do: service iscsi restart output written to /var/log/message Stopping iscsi: Sep 20 12:14:22 localhost kernel: connection1:0: detected conn error (1020) [ OK ] Starting iscsi: Sep 20 12:14:22 localhost kernel: scsi1 : iSCSI Initiator over TCP/IP Sep 20 12:14:22 localhost iscsid: Connection1:0 to [target: iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3, portal: 192.168.0.155,3260] through [iface: default] is shutdown. Sep 20 12:14:22 localhost iscsid: Could not set session2 priority. READ/WRITE throughout and latency could be affected. [ OK ] [root@db iscsi]# Sep 20 12:14:23 localhost iscsid: Connection2:0 to [target: iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3, portal: 192.168.0.155,3260] through [iface: default] is operational now Ran a login command: iscsiadm -m node -T iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3 -p 192.168.0.155 -l No errors, no logging occurred. Next I compared the output from "fdisk -l|egrep dev" both with the iscsi session and without. There is no difference. I suppose I could just look in /etc/mtab. Any ideas on how I can get an iscsi device?

  Read the article

• Laptop windows 7 power settings - screen display goes black after 1 minute

  - by Puneet Dudeja

  My laptop windows 7 power settings are not working since last week, i have tried using "Dim display after 5 hours" and "Dim Never" also, but my screen goes black after 1 minute. Any resolutions ? My laptop model is : Compaq Pressario CQ62 Graphics Card Information: Name Intel(R) HD Graphics PNP Device ID PCI\VEN_8086&DEV_0046&SUBSYS_1425103C&REV_02\3&11583659&0&10 Adapter Type Intel(R) HD Graphics (Core i3), Intel Corporation compatible Adapter Description Intel(R) HD Graphics Adapter RAM 1.21 GB (1,303,306,240 bytes) Installed Drivers igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32 Driver Version 8.15.10.2119 INF File oem17.inf (iILKM0 section) Color Planes Not Available Color Table Entries 4294967296 Resolution 1366 x 768 x 59 hertz Bits/Pixel 32 Memory Address 0xD0000000-0xD03FFFFF Memory Address 0xC0000000-0xCFFFFFFF I/O Port 0x00004050-0x00004057 IRQ Channel IRQ 4294967294 I/O Port 0x000003B0-0x000003BB I/O Port 0x000003C0-0x000003DF Memory Address 0xA0000-0xBFFFF Driver c:\windows\system32\drivers\igdkmd64.sys (8.15.10.2119, 9.85 MB (10,326,784 bytes), 4/21/2010 6:18 PM) I am not able to solve my problem from any of the answers till now. The screen still goes dark and password screen appears after 1 minute of idle time.

  Read the article

• Weblogic WLST classpath

  - by lepricon28

  When I run the WLST script .sh script to set the env as follows why can't I see the updated path when I do echo? [linbox2 bin]$ ./setWLSEnv.sh CLASSPATH=/directory/ols_wls/patch_wlss1032/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/directory/ols_wls/patch_wls1032/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/directory/ols_wls/patch_oepe1032/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/directory/ols_wls/patch_ocm1031/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/directory/ols_wls/jrockit_160_14_R27.6.5-32/lib/tools.jar:/directory/ols_wls/utils/config/10.3/config-launch.jar:/directory/ols_wls/wlserver_10.3/server/lib/weblogic_sp.jar:/directory/ols_wls/wlserver_10.3/server/lib/weblogic.jar:/directory/ols_wls/modules/features/weblogic.server.modules_10.3.2.0.jar:/directory/ols_wls/wlserver_10.3/server/lib/webservices.jar:/directory/ols_wls/modules/org.apache.ant_1.7.0/lib/ant-all.jar:/directory/ols_wls/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar: PATH=/directory/ols_wls/wlserver_10.3/server/bin:/directory/ols_wls/modules/org.apache.ant_1.7.0/bin:/directory/ols_wls/jrockit_160_14_R27.6.5-32/jre/bin:/directory/ols_wls/jrockit_160_14_R27.6.5-32/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/usr/java/j2sdk1.4.2_11/bin/bin:/home/oracle/bin:/directory/wls_olwcs/jdk160_14_R27.6.5-32/bin:/directory/ccanywhere81/bin:/directory/oracle/oracle/product/10.2.0/client_1/bin Your environment has been set. [linbox2 bin]$ export CLASSPATH [linbox2 bin]$ export PATH [linbox2 bin]$ echo $PATH /usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/usr/java/j2sdk1.4.2_11/bin/bin:/home/oracle/bin:/directory/wls_olwcs/jdk160_14_R27.6.5-32/bin:/directory/ccanywhere81/bin:/directory/oracle/oracle/product/10.2.0/client_1/bin [linbox2 bin]$

  Read the article

• My computer keeps restart when accept Skype call

  - by hvtuananh

  I'm using latest Skype version (4.2) on Windows XP SP3 My computer keeps restart when I click "Accept" button on Skype call Windows Update is running and I've already installed all updates What's wrong with my computer? How to fix it? EDIT: I only see this error in Event Viewer Event Type: Error Event Source: System Error Event Category: (102) Event ID: 1003 Date: 3/2/2010 Time: 3:47:50 PM User: N/A Computer: TUANANH Description: Error code 1000000a, parameter1 ffffff94, parameter2 0000001c, parameter3 00000000, parameter4 80537bf1. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 53 79 73 74 65 6d 20 45 System E 0008: 72 72 6f 72 20 20 45 72 rror Er 0010: 72 6f 72 20 63 6f 64 65 ror code 0018: 20 31 30 30 30 30 30 30 1000000 0020: 61 20 20 50 61 72 61 6d a Param 0028: 65 74 65 72 73 20 66 66 eters ff 0030: 66 66 66 66 39 34 2c 20 ffff94, 0038: 30 30 30 30 30 30 31 63 0000001c 0040: 2c 20 30 30 30 30 30 30 , 000000 0048: 30 30 2c 20 38 30 35 33 00, 8053 0050: 37 62 66 31 7bf1

  Read the article

• Sharepoint 2007 Event ID 6482

  - by Dave M

  Our two server SharePoint 2007 SP2 farm has an issue. Event ID 6482 appears in the Application log of the Web front end many times a day. Often many time a minute. The full error is from Office SharePoint Server Event Type: Error Event Source: Office SharePoint Server Event Category: Office Server Shared Services Event ID: 6482 Date: 11/12/2009 Time: 3:05:22 PM User: N/A Computer: XXXXXX Description: Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (36a9b7ef-59aa-4f94-8887-8bf7b56f2f91). Reason: Error during encryption or decryption. System error code 0. Techinal Support Details: System.ArgumentException: Error during encryption or decryption. System error code 0. at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.SynchronizeDefaultContentSource(IDictionary applications) at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize() at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob) For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. The SharePoint site appears to be functioning normally and Search returns expected results. Any suggestions would be appreciated

  Read the article

• Unable to ping gateway via bridge nic

  - by Ara

  I'm trying to install KVM on Ubuntu 12.04 server. We have multiple nic on this server of which we primarily use eth0. The server network runs fine(i'm able to ping gateway, ping dns server and ping servers on internet) with eth0 /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.22.194 netmask 255.255.255.0 network 192.168.22.0 broadcast 192.168.22.255 gateway 192.168.22.1 dns-nameservers 10.71.130.58 10.71.130.60 dns-search test.local I installed bridge-utils and configured br0 as below /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 192.168.22.194 netmask 255.255.255.0 network 192.168.22.0 broadcast 192.168.22.255 gateway 192.168.22.1 dns-nameservers 10.71.130.58 10.71.130.60 dns-search test.local bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off Post which i'm able to ping servers on the same ip range 192.168.22.2-254 except for 192.168.22.1 (which is the gateway) also i'm not able to ping any other servers. I'm not able to ping this machine from network. The output for route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.22.1 0.0.0.0 UG 100 0 0 br0 192.168.22.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 I've been struggling with this issue for past 5 days, would be of help if anyone can point me in the right direction to fix this issue. Thanks in advance

  Read the article

• Extremely simple source control

  - by unknown (google)

  Hi, I want a very simple source control system for storing word documents I'm working on. I'm a writer, not a developer. I want something really simple so that I have (a) backup and (b) version control. Nothing more than that. Ideally on the cloud. Ideally free, or close to free. I'd like to avoid doing anything too technical. [If it helps, once upon a time, I could code and I now work as an Agile PM, so I understand source control from a feature, if not technical perspective.] Thanks for your help! Clarke

  Read the article

• How can I flush my ssh keys on power management activity?

  - by Sam Halicke

  Hi all, Using ssh-agent and private keys per the usual. Everything's working as normal. My question regards best practices on flushing keys from ssh-add on activity like sleep, suspend, hibernate, etc. I thought about writing a simple wrapper around those commands, but then wondered if are they even called? Or does the kernel initiate this activity directly? Are the PM utilities strictly userland? I would like this additional layer of security beyond locking my screen, etc. and was wondering if anyone else had solved this elegantly or has best practices to recommend. Thanks.

  Read the article

• Redmine Subversion: LDAP _and_ local auth

  - by Frank Brenner

  I need to set up a subversion repository with apache authentication against both an external LDAP server as well as the local Redmine database. That is, we have users whose accounts exist only in the LDAP directory and some users whose accounts only exist in the local Redmine db - all should be able to access the repo. I can't quite seem to get the apache config right for this. I know I saw a how-to for this at some point, I think using Redmine.pm, but I can't seem to find it anymore.. Thanks.

  Read the article

• Debian Bluetooth headphones not working

  - by cYrus

  Hardware Headphones Bluetooth dongle Maybe not exactly these models. Setup I tried to follow some guides, here's what I've done so far: Install software: sudo apt-get install bluez-utils bluez-alsa Reboot (just to be sure): $ dmesg | grep -i bluetooth [ 20.268212] Bluetooth: Core ver 2.16 [ 20.268230] Bluetooth: HCI device and connection manager initialized [ 20.268233] Bluetooth: HCI socket layer initialized [ 20.268235] Bluetooth: L2CAP socket layer initialized [ 20.268239] Bluetooth: SCO socket layer initialized [ 20.284685] Bluetooth: RFCOMM TTY layer initialized [ 20.284692] Bluetooth: RFCOMM socket layer initialized [ 20.284693] Bluetooth: RFCOMM ver 1.11 [ 20.335375] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.335378] Bluetooth: BNEP filters: protocol multicast The deamon is running: $ /etc/init.d/bluetooth status [ ok ] bluetooth is running. Plug the dongle: $ dmesg | tail [...] [23108.352034] usb 5-2: new full-speed USB device number 2 using ohci_hcd [23108.571131] usb 5-2: New USB device found, idVendor=0a12, idProduct=0001 [23108.571136] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [23108.629042] usbcore: registered new interface driver btusb Put the headphones in pairing mode, and try scanning: $ hcitool scan Scanning ... Found nothing. What's next? What should I try? I'll update this answer as soon as you provide me hints.

  Read the article

• Node.js Build failed: -> task failed (error#2)?

  - by Richard Hedges

  I'm trying to install Node.js on my CentOS server. I run ./configure and it runs perfectly fine. I then run the 'make' command and it produces the following: [5/38] libv8.a: deps/v8/SConstruct - out/Release/libv8.a /usr/local/bin/python "/root/node/tools/scons/scons.py" -j 1 -C "/root/node/out/Release/" -Y "/root/node/deps/v8" visibility=default mode=release arch=ia32 toolchain=gcc library=static snapshot=on scons: Reading SConscript files ... ImportError: No module named bz2: File "/root/node/deps/v8/SConstruct", line 37: import js2c, utils File "/root/node/deps/v8/tools/js2c.py", line 36: import bz2 Waf: Leaving directory `/root/node/out' Build failed: - task failed (err #2): {task: libv8.a SConstruct - libv8.a} make: * [program] Error 1 I've done some searching on Google but I can't seem to find anything to help. Most of what I've found is for Cygwin anyway, and I'm on CentOS 4.9. Like I said, the ./configure went through perfectly fine with no errors, so there's nothing there that I can see. EDIT I've got a little further. Now I just need to upgrade G++ to version 4 (or higher). I tried yum update gcc but no luck, so I tried yum install gcc44, which resulted in no luck either. Has anyone got any ideas as to how I can update G++?

  Read the article

• CentOS 5 : error in installing php-imap

  - by TMMDev

  can someone please help me with this CentOS 5 question? I am trying to install php-imap, i tried yum install php-imap but I am getting the following output: Loaded plugins: fastestmirror, priorities, security Loading mirror speeds from cached hostfile * base: centos.hostingxtreme.com * epel: mirror.steadfast.net * extras: mirror.team-cymru.org * updates: mirror.beyondhosting.net Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package php-imap.x86_64 0:5.1.6-44.el5_10 set to be updated --> Processing Dependency: php-common = 5.1.6-44.el5_10 for package: php-imap --> Finished Dependency Resolution php-imap-5.1.6-44.el5_10.x86_64 from updates has depsolving problems --> Missing Dependency: php-common = 5.1.6-44.el5_10 is needed by package php-imap-5.1.6-44.el5_10.x86_64 (updates) Error: Missing Dependency: php-common = 5.1.6-44.el5_10 is needed by package php-imap-5.1.6-44.el5_10.x86_64 (updates) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest The program package-cleanup is found in the yum-utils package. I already have php-common installed, I ran "yum install php-common" and got the following output Loaded plugins: fastestmirror, priorities, security Loading mirror speeds from cached hostfile * base: centos.hostingxtreme.com * epel: mirror.steadfast.net * extras: mirror.team-cymru.org * updates: mirror.beyondhosting.net Setting up Install Process Package matching php-common-5.1.6-44.el5_10.x86_64 already installed. Checking for update. Nothing to do how can I fix this problem?

  Read the article

• This weird behaviour from cronjob

  - by The DOCTOR from TARDIS

  I have set the crontab like this: */5 0 * * * /www/permitChat.sh and the /www/permitChat.sh is this: # We are setting the name of file # in the variable along with complete path. sFilePath=`date +\/www\/ChatLogs\/%Y\/%m/%d_%m_%Y.txt` # First we set its permissions to # readable by all users, and then # modify them to be writable by only root. chmod a=r $sFilePath chmod u+w $sFilePath ls -lh $sFilePath The trouble I am facing is, the cron gets executed after 12:00 PM everyday, instead of executing at 12:00 AM to 01:00 AM, every 5 minutes. What could be wrong? All my system variables appear to be synced.

  Read the article

• Is my website running on an iPhone?

  - by Stefano Borini

  Provocative question, but in any case, this is what it would appear... unless there's some other reason, of course. In my cystat wordpress log, I obtained the following entry IP Browser OS Date Method Type URL 127.0.0.1 Safari 419.3 iPhone July 30, 2009 7:39 pm GET BLOG /blog/ The IP address is the IP of the visiting client. It's clear that this is not possible. Why do I get 127.0.0.1 as IP? cystat bug? some weird network trick I am not aware of? or is my website really running on an iPhone, and the guy at the applestore is reading my blog ?

  Read the article

• Xmodmap configuration

  - by Krishna S

  On my Debian Linux machine Ctrl+Alt+F1 is bound to a virtual terminal. I can see the corresponding entry by running xmodmap -pke keycode 67 = F1 XF86_Switch_VT_1 F1 XF86_Switch_VT_1 Per this thread, which I might add is consistent with what I've read elsewhere, the columns on the right hand side of = correspond to key, Shift+key, AltGr+key and Shift+AltGr+key. Given that, I don't understand how the keycode mapping for F1 (above) works for Ctrl+Alt+F1. It seems it should really be either Shift+F1 or Shift+AltGr+F1? Here's the output of xmodmap -pm on my machine: shift Shift_L (0x32), Shift_R (0x3e) lock Caps_Lock (0x25) control Control_L (0x42), Control_R (0x69) mod1 Alt_L (0x40), Alt_R (0x6c), Meta_L (0xcd) mod2 Num_Lock (0x4d) mod3 mod4 Super_L (0x85), Super_R (0x86), Super_L (0xce), Hyper_L (0xcf) mod5 ISO_Level3_Shift (0x5c), Mode_switch (0xcb) Can anybody explain it?

  Read the article

• How can I check the location of perl and CPAN files?

  - by Rob

  I constantly have to set up new servers for an employer of mine for an exact purpose of his, and as such they all have to be set up in exactly the same way. So I've created a script in PHP that I run from my own box to automatically send over all the relevant files, compile everything, run updates, and everything else. However, for some reason these brand new servers come with perl, which is fine, but they have perl installed in different locations. This makes it a pain for me to copy over Config.pm for CPAN without going in and finding the location manually. Is there perhaps some command I'm unaware of that will hunt down the precise location? If it helps, usually the servers are CentOS 5

  Read the article

• where is this SFP problem occuring

  - by Saif Khan

  Hi, Inbound mail to a specific user is been forwarded to his external mailbox at another domain. Add mails are routed correctly with the exception of one domain. When mail are sent to users of my domain, including that user, the mails are delivered to everyone except him...as the mail admin I am getting the message The following recipient(s) cannot be reached: usermailbox on 1/10/2011 1:27 PM There was a SMTP communication problem with the recipient's email server. Please contact your system administrator. email.speedimpex.com #5.5.0 smtp;587 [email protected] sender domain does not match SPF records I am sure this has nothing to do with my mail server, however, can someone confirm?

  Read the article

• Custom Transport Agent: How do I collect NDRs and all other undeliverables in Exchange 2010 from the Postmaster?

  - by makerofthings7

  I'm trying to collect all NDRs in a single mailbox for all invalid recipients, and anything that fails for any reason. I have a custom transport agent, that I've written myself that appears here: [PS] C:\Windows\system32>Get-TransportAgent Identity Enabled Priority -------- ------- -------- Transport Rule Agent True 1 Text Messaging Routing Agent True 2 Text Messaging Delivery Agent True 3 Routing Rule Agent True 4 **** Sometimes when I run get-messagetrackinglog I get failures like this below RunspaceId : 4ecc61fb-13b9-4506-b680-577222c9bf21 Timestamp : 10/14/2013 12:42:42 PM ClientIp : ClientHostname : Exchange1 ServerIp : ServerHostname : SourceContext : Routing Rule Agent ConnectorId : Source : AGENT EventId : FAIL InternalMessageId : 4416 MessageId : <[email protected]> Recipients : {[email protected]} RecipientStatus : {} TotalBytes : 4542 RecipientCount : 1 RelatedRecipientAddress : Reference : MessageSubject : review CGRC due diligence. Sender : [email protected] ReturnPath : [email protected] MessageInfo : MessageLatency : MessageLatencyType : None EventData : How can I collect the NDRs in a single mailbox for review? I have already set the following command but it is of no effect [PS] C:\>set-TransportConfig -JournalingReportNdrTo [email protected] -ExternalPostmasterAddress [email protected]

  Read the article

• OpenVPN - client-to-client traffic working in one direction but not the other

  - by Pawz

  I have the following VPN configuration: +------------+ +------------+ +------------+ | outpost |----------------| kino |----------------| guchuko | +------------+ +------------+ +------------+ OS: FreeBSD 6.2 OS: Gentoo 2.6.32 OS: Gentoo 2.6.33.3 Keyname: client3 Keyname: server Keyname: client1 eth0: 10.0.1.254 eth0: 203.x.x.x eth0: 192.168.0.6 tun0: 192.168.150.18 tun0: 192.168.150.1 tun0: 192.168.150.10 P-t-P: 192.166.150.17 P-t-P: 192.168.150.2 P-t-P: 192.168.150.9 Kino is the server and has client-to-client enabled. I am using "fragment 1400" and "mssfix" on all three machines. An mtu-test on both connections is successful. All three machines have ip forwarding enabled, by this on the gentoo boxes: net.ipv4.conf.all.forwarding = 1 And this on the FreeBSD box: net.inet.ip.forwarding: 1 In the server's "ccd" directory is the following files: client1: iroute 192.168.0.0 255.255.255.0 client3: iroute 10.0.1.0 255.255.255.0 The server config has these routes configured: push "route 192.168.0.0 255.255.255.0" push "route 10.0.1.0 255.255.255.0" route 192.168.0.0 255.255.255.0 route 10.0.1.0 255.255.255.0 Kino's routing table looks like this: 192.168.150.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.0.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.150.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Outpost's like this: 192.168.150 192.168.150.17 UGS 0 17 tun0 192.168.0 192.168.150.17 UGS 0 2 tun0 192.168.150.17 192.168.150.18 UH 3 0 tun0 And Guchuko's like this: 192.168.150.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 192.168.150.9 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Now, the tests. Pings from Guchuko to Outpost's LAN IP work OK, as does the reverse - pings from Outpost to Guchuko's LAN IP. However... Pings from Outpost, to a machine on Guchuko's LAN work fine: .(( root@outpost )). (( 06:39 PM )) :: ~ :: # ping 192.168.0.3 PING 192.168.0.3 (192.168.0.3): 56 data bytes 64 bytes from 192.168.0.3: icmp_seq=0 ttl=63 time=462.641 ms 64 bytes from 192.168.0.3: icmp_seq=1 ttl=63 time=557.909 ms But a ping from Guchuko, to a machine on Outpost's LAN does not: .(( root@guchuko )). (( 06:43 PM )) :: ~ :: # ping 10.0.1.253 PING 10.0.1.253 (10.0.1.253) 56(84) bytes of data. --- 10.0.1.253 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2000ms Guchuko's tcpdump of tun0 shows: 18:46:27.716931 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 1, length 64 18:46:28.716715 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 2, length 64 18:46:29.716714 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 Outpost's tcpdump on tun0 shows: 18:44:00.333341 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 18:44:01.334073 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 4, length 64 18:44:02.331849 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 5, length 64 So Outpost is receiving the ICMP request destined for the machine on it's subnet, but appears not be forwarding it. Outpost has gateway_enable="YES" in its rc.conf which correctly sets net.inet.ip.forwarding to 1 as mentioned earlier. As far as I know, that's all that's required to make a FreeBSD box forward packets between interfaces. Is there something else I could be forgetting ? FWIW, pinging 10.0.1.253 from Kino has the same result - the traffic does not get forwarded. UPDATE: I've found that I can only ping certain IP's on Guchuko's LAN from Outpost. From Outpost I can ping 192.168.0.3 and 192.168.0.2, but 192.168.99 and 192.168.0.4 are unreachable. The same tcpdump behavior can be seen. I think this means the problem can't be due to ipforwarding or routing, because Outpost can reach SOME hosts on Guchuko's LAN but not others and likewise, Guchuko can reach two hosts on Outpost's LAN, but not others. This baffles me.

  Read the article

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >