Search Results

Search found 10383 results on 416 pages for 'product naming'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 71/416 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

  • External USB drive is failing

    - by dma_k
    I have an external USB 2.0 drive WD My Book Mirror Edition, running in RAID 1 (mirroring) mode. A while ago the hard drive started to fail: it stops responding (directories are not listed returning an error after a big timeout). Sometimes it works for weeks before a failure, sometimes – few hours. Small write operations (like removing few files or editing a small file) do not harm, but when copying large files to the drive over the network, or creating the archive locally, the kernel dumps. Also interesting to note that once kernel has failed, Linux does not want to reboot normally (reboot hangs); when Linux box is shutdown with power button, WD drive does not go to sleep mode (as it usually does): leds continue to run, pressing and holding the "shutdown" button on drive's back panel does not do anything; only unplugging the power cord helps. Here goes the boot log: Aug 16 00:32:21 kernel: [ 1.514106] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Aug 16 00:32:21 kernel: [ 1.657738] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Aug 16 00:32:21 kernel: [ 1.673747] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 1.673751] ehci_hcd 0000:00:1d.7: EHCI Host Controller Aug 16 00:32:21 kernel: [ 1.725224] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Aug 16 00:32:21 kernel: [ 1.741647] ehci_hcd 0000:00:1d.7: using broken periodic workaround Aug 16 00:32:21 kernel: [ 1.761790] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported Aug 16 00:32:21 kernel: [ 1.761873] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000 Aug 16 00:32:21 kernel: [ 1.796043] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Aug 16 00:32:21 kernel: [ 1.879069] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Aug 16 00:32:21 kernel: [ 1.895446] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 1.911796] usb usb1: Product: EHCI Host Controller Aug 16 00:32:21 kernel: [ 1.928015] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd Aug 16 00:32:21 kernel: [ 1.944331] usb usb1: SerialNumber: 0000:00:1d.7 Aug 16 00:32:21 kernel: [ 1.961285] usb usb1: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 1.994412] hub 1-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 2.010864] hub 1-0:1.0: 8 ports detected Aug 16 00:32:21 kernel: [ 2.085939] uhci_hcd: USB Universal Host Controller Interface driver Aug 16 00:32:21 kernel: [ 2.191945] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Aug 16 00:32:21 kernel: [ 2.226029] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 2.226034] uhci_hcd 0000:00:1d.0: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.243237] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Aug 16 00:32:21 kernel: [ 2.260390] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00 Aug 16 00:32:21 kernel: [ 2.277517] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Aug 16 00:32:21 kernel: [ 2.294815] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 2.312173] usb usb2: Product: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.329534] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd Aug 16 00:32:21 kernel: [ 2.346828] usb usb2: SerialNumber: 0000:00:1d.0 Aug 16 00:32:21 kernel: [ 2.412989] usb usb2: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 2.430651] usb 1-2: new high speed USB device using ehci_hcd and address 2 Aug 16 00:32:21 kernel: [ 2.449046] hub 2-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 2.466514] hub 2-0:1.0: 2 ports detected Aug 16 00:32:21 kernel: [ 2.484639] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Aug 16 00:32:21 kernel: [ 2.537750] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 2.537756] uhci_hcd 0000:00:1d.1: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.555085] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Aug 16 00:32:21 kernel: [ 2.572231] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00 Aug 16 00:32:21 kernel: [ 2.589593] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Aug 16 00:32:21 kernel: [ 2.606869] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 2.624134] usb usb3: Product: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.641329] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd Aug 16 00:32:21 kernel: [ 2.658505] usb usb3: SerialNumber: 0000:00:1d.1 Aug 16 00:32:21 kernel: [ 2.675843] usb usb3: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 2.692864] hub 3-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 2.709651] hub 3-0:1.0: 2 ports detected Aug 16 00:32:21 kernel: [ 2.727378] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Aug 16 00:32:21 kernel: [ 2.768252] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 2.768258] uhci_hcd 0000:00:1d.2: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.806679] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Aug 16 00:32:21 kernel: [ 2.824117] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00 Aug 16 00:32:21 kernel: [ 2.841405] usb 1-2: New USB device found, idVendor=1058, idProduct=1104 Aug 16 00:32:21 kernel: [ 2.858448] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Aug 16 00:32:21 kernel: [ 2.875347] usb 1-2: Product: My Book Aug 16 00:32:21 kernel: [ 2.892113] usb 1-2: Manufacturer: Western Digital Aug 16 00:32:21 kernel: [ 2.908915] usb 1-2: SerialNumber: 575532553130303530353538 Aug 16 00:32:21 kernel: [ 2.943242] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Aug 16 00:32:21 kernel: [ 2.960405] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 2.977615] usb usb4: Product: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.994687] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd Aug 16 00:32:21 kernel: [ 3.011711] usb usb4: SerialNumber: 0000:00:1d.2 Aug 16 00:32:21 kernel: [ 3.029589] usb usb4: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 3.082027] sd 2:0:0:0: [sda] Attached SCSI disk Aug 16 00:32:21 kernel: [ 3.103953] usb 1-2: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 3.122625] hub 4-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 3.140484] hub 4-0:1.0: 2 ports detected Aug 16 00:32:21 kernel: [ 3.161680] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 Aug 16 00:32:21 kernel: [ 3.181257] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 3.181263] uhci_hcd 0000:00:1d.3: UHCI Host Controller Aug 16 00:32:21 kernel: [ 3.198614] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Aug 16 00:32:21 kernel: [ 3.216012] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00 Aug 16 00:32:21 kernel: [ 3.249877] Uniform CD-ROM driver Revision: 3.20 Aug 16 00:32:21 kernel: [ 3.267765] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Aug 16 00:32:21 kernel: [ 3.284947] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 3.302023] usb usb5: Product: UHCI Host Controller Aug 16 00:32:21 kernel: [ 3.319215] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd Aug 16 00:32:21 kernel: [ 3.336298] usb usb5: SerialNumber: 0000:00:1d.3 Aug 16 00:32:21 kernel: [ 3.368377] Initializing USB Mass Storage driver... Aug 16 00:32:21 kernel: [ 3.390652] usbcore: registered new interface driver hiddev Aug 16 00:32:21 kernel: [ 3.408109] scsi4 : SCSI emulation for USB Mass Storage devices Aug 16 00:32:21 kernel: [ 3.425281] sr 0:0:1:0: Attached scsi CD-ROM sr0 Aug 16 00:32:21 kernel: [ 3.438978] sr 0:0:1:0: Attached scsi generic sg0 type 5 Aug 16 00:32:21 kernel: [ 3.456328] usbcore: registered new interface driver usb-storage Aug 16 00:32:21 kernel: [ 3.474564] usb-storage: device found at 2 Aug 16 00:32:21 kernel: [ 3.474567] usb-storage: waiting for device to settle before scanning Aug 16 00:32:21 kernel: [ 3.475320] sd 2:0:0:0: Attached scsi generic sg1 type 0 Aug 16 00:32:21 kernel: [ 3.492587] USB Mass Storage support registered. Aug 16 00:32:21 kernel: [ 3.510930] usb usb5: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 3.531076] hub 5-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 3.548399] hub 5-0:1.0: 2 ports detected Aug 16 00:32:21 kernel: [ 3.591743] input: Western Digital My Book as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.1/input/input2 Aug 16 00:32:21 kernel: [ 3.609515] generic-usb 0003:1058:1104.0001: input,hidraw0: USB HID v1.11 Device [Western Digital My Book] on usb-0000:00:1d.7-2/input1 Aug 16 00:32:21 kernel: [ 3.627466] usbcore: registered new interface driver usbhid Aug 16 00:32:21 kernel: [ 8.581664] usb-storage: device scan complete Aug 16 00:32:21 kernel: [ 8.624270] scsi 4:0:0:0: Direct-Access WD My Book 1008 PQ: 0 ANSI: 4 Aug 16 00:32:21 kernel: [ 8.655135] scsi 4:0:0:1: Enclosure WD My Book Device 1008 PQ: 0 ANSI: 4 Aug 16 00:32:21 kernel: [ 8.675393] sd 4:0:0:0: Attached scsi generic sg2 type 0 Aug 16 00:32:21 kernel: [ 8.698669] scsi 4:0:0:1: Attached scsi generic sg3 type 13 Aug 16 00:32:21 kernel: [ 8.723370] sd 4:0:0:0: [sdb] 1953513472 512-byte logical blocks: (1.00 TB/931 GiB) Aug 16 00:32:21 kernel: [ 8.750477] sd 4:0:0:0: [sdb] Write Protect is off Aug 16 00:32:21 kernel: [ 8.769411] sd 4:0:0:0: [sdb] Mode Sense: 10 00 00 00 Aug 16 00:32:21 kernel: [ 8.769414] sd 4:0:0:0: [sdb] Assuming drive cache: write through Aug 16 00:32:21 kernel: [ 8.822971] sd 4:0:0:0: [sdb] Assuming drive cache: write through Aug 16 00:32:21 kernel: [ 8.841978] sdb: sdb1 Aug 16 00:32:21 kernel: [ 8.905580] sd 4:0:0:0: [sdb] Assuming drive cache: write through Aug 16 00:32:21 kernel: [ 8.924173] sd 4:0:0:0: [sdb] Attached SCSI disk Aug 16 00:32:21 kernel: [ 11.600492] XFS mounting filesystem sdb1 Aug 16 00:32:21 kernel: [ 12.222948] Ending clean XFS mount for filesystem: sdb1 After a while the following appears in a log: Aug 16 09:30:56 kernel: [32359.112029] usb 1-2: reset high speed USB device using ehci_hcd and address 2 Aug 16 09:31:59 kernel: [32422.112035] usb 1-2: reset high speed USB device using ehci_hcd and address 2 Aug 16 09:33:00 kernel: [32483.112029] usb 1-2: reset high speed USB device using ehci_hcd and address 2 And then it is followed by few kernel dumps, which I think, are not good: Aug 16 09:33:40 kernel: [32520.428027] INFO: task xfssyncd:1002 blocked for more than 120 seconds. Aug 16 09:33:40 kernel: [32520.462689] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 16 09:33:40 kernel: [32520.497422] xfssyncd D c3d84a60 0 1002 2 0x00000000 Aug 16 09:33:40 kernel: [32520.532117] f6c9aa80 00000046 c1132742 c3d84a60 00000286 c1418100 c1418100 00000000 Aug 16 09:33:40 kernel: [32520.566867] f6c9ac3c c2808100 00000000 f653b18b 00001d76 00000001 f6c9aa80 c3c3f0e0 Aug 16 09:33:40 kernel: [32520.601343] 08e59242 f6c9ac3c 2e41392b 00000000 08e59242 00000000 c3f7fb48 0067385a Aug 16 09:33:40 kernel: [32520.635533] Call Trace: Aug 16 09:33:40 kernel: [32520.668991] [<c1132742>] ? cfq_set_request+0x0/0x290 Aug 16 09:33:40 kernel: [32520.702804] [<c126b532>] ? io_schedule+0x5f/0x98 Aug 16 09:33:40 kernel: [32520.736555] [<c1128be0>] ? get_request_wait+0xcb/0x146 Aug 16 09:33:40 kernel: [32520.770360] [<c10437ba>] ? autoremove_wake_function+0x0/0x2d Aug 16 09:33:40 kernel: [32520.804110] [<c112907c>] ? __make_request+0x2cc/0x3d9 Aug 16 09:33:40 kernel: [32520.837713] [<c1128230>] ? blk_peek_request+0x135/0x143 Aug 16 09:33:40 kernel: [32520.871265] [<f8582987>] ? scsi_dispatch_cmd+0x185/0x1e5 [scsi_mod] Aug 16 09:33:40 kernel: [32520.904407] [<c1127cf1>] ? generic_make_request+0x266/0x2b4 Aug 16 09:33:40 kernel: [32520.937007] [<c10cf821>] ? bvec_alloc_bs+0x95/0xaf Aug 16 09:33:40 kernel: [32520.969033] [<c1127dfb>] ? submit_bio+0xbc/0xd6 Aug 16 09:33:40 kernel: [32521.000485] [<c10cffd1>] ? bio_add_page+0x28/0x2e Aug 16 09:33:40 kernel: [32521.031403] [<f8918d38>] ? _xfs_buf_ioapply+0x206/0x22b [xfs] Aug 16 09:33:40 kernel: [32521.061888] [<f89197bd>] ? xfs_buf_iorequest+0x38/0x60 [xfs] Aug 16 09:33:40 kernel: [32521.091845] [<f8907230>] ? xlog_bdstrat_cb+0x16/0x3d [xfs] Aug 16 09:33:40 kernel: [32521.121222] [<f8905781>] ? XFS_bwrite+0x32/0x64 [xfs] Aug 16 09:33:40 kernel: [32521.150007] [<f89059be>] ? xlog_sync+0x20b/0x311 [xfs] Aug 16 09:33:40 kernel: [32521.178214] [<f89112fc>] ? xfs_trans_ail_tail+0x12/0x27 [xfs] Aug 16 09:33:40 kernel: [32521.205914] [<f8906261>] ? xlog_state_sync_all+0xa2/0x141 [xfs] Aug 16 09:33:40 kernel: [32521.233074] [<f8906611>] ? _xfs_log_force+0x51/0x68 [xfs] Aug 16 09:33:40 kernel: [32521.259664] [<c103abaf>] ? process_timeout+0x0/0x5 Aug 16 09:33:40 kernel: [32521.285662] [<f8906636>] ? xfs_log_force+0xe/0x27 [xfs] Aug 16 09:33:40 kernel: [32521.311171] [<f89202df>] ? xfs_sync_worker+0x17/0x5c [xfs] Aug 16 09:33:40 kernel: [32521.336117] [<f891fbb7>] ? xfssyncd+0x134/0x17d [xfs] Aug 16 09:33:40 kernel: [32521.360498] [<f891fa83>] ? xfssyncd+0x0/0x17d [xfs] Aug 16 09:33:40 kernel: [32521.384211] [<c1043588>] ? kthread+0x61/0x66 Aug 16 09:33:40 kernel: [32521.407890] [<c1043527>] ? kthread+0x0/0x66 Aug 16 09:33:40 kernel: [32521.430876] [<c1003d47>] ? kernel_thread_helper+0x7/0x10 Aug 16 09:33:40 kernel: [32521.453394] INFO: task flush-8:16:12945 blocked for more than 120 seconds. Aug 16 09:33:40 kernel: [32521.476116] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 16 09:33:40 kernel: [32521.498579] flush-8:16 D 00000000 0 12945 2 0x00000000 Aug 16 09:33:40 kernel: [32521.520649] f4e4d540 00000046 e412e940 00000000 00000002 c1418100 c1418100 c14136ac Aug 16 09:33:40 kernel: [32521.542426] f4e4d6fc c2808100 00000000 00000000 000008b4 00000001 f4e4d540 c3c3f0e0 Aug 16 09:33:40 kernel: [32521.563745] 02e905a8 f4e4d6fc 007a5399 00000000 02e905a8 00000000 f4e2db48 00670b98 Aug 16 09:33:40 kernel: [32521.585077] Call Trace: Aug 16 09:33:40 kernel: [32521.605790] [<c126b532>] ? io_schedule+0x5f/0x98 Aug 16 09:33:40 kernel: [32521.626184] [<c1128be0>] ? get_request_wait+0xcb/0x146 Aug 16 09:33:40 kernel: [32521.646133] [<c10437ba>] ? autoremove_wake_function+0x0/0x2d Aug 16 09:33:40 kernel: [32521.665659] [<c112907c>] ? __make_request+0x2cc/0x3d9 Aug 16 09:33:40 kernel: [32521.684716] [<f891796e>] ? xfs_convert_page+0x30a/0x331 [xfs] Aug 16 09:33:40 kernel: [32521.703366] [<c1127cf1>] ? generic_make_request+0x266/0x2b4 Aug 16 09:33:40 kernel: [32521.721644] [<c10cf821>] ? bvec_alloc_bs+0x95/0xaf Aug 16 09:33:40 kernel: [32521.739465] [<c1127dfb>] ? submit_bio+0xbc/0xd6 Aug 16 09:33:40 kernel: [32521.756896] [<c10cfa45>] ? bio_alloc_bioset+0x7b/0xba Aug 16 09:33:40 kernel: [32521.774046] [<f8917af0>] ? xfs_submit_ioend_bio+0x3b/0x44 [xfs] Aug 16 09:33:40 kernel: [32521.790694] [<f8917ba3>] ? xfs_submit_ioend+0xaa/0xc4 [xfs] Aug 16 09:33:40 kernel: [32521.806736] [<f891817d>] ? xfs_page_state_convert+0x5c0/0x61c [xfs] Aug 16 09:33:40 kernel: [32521.822859] [<c113705b>] ? __lookup_tag+0x8e/0xee Aug 16 09:33:40 kernel: [32521.838958] [<f891840d>] ? xfs_vm_writepage+0x91/0xc4 [xfs] Aug 16 09:33:40 kernel: [32521.855039] [<c108bbcc>] ? __writepage+0x8/0x22 Aug 16 09:33:40 kernel: [32521.871067] [<c108c17b>] ? write_cache_pages+0x1af/0x29f Aug 16 09:33:40 kernel: [32521.886616] [<c108bbc4>] ? __writepage+0x0/0x22 Aug 16 09:33:40 kernel: [32521.901593] [<c108c285>] ? generic_writepages+0x1a/0x21 Aug 16 09:33:40 kernel: [32521.916455] [<f8918338>] ? xfs_vm_writepages+0x0/0x38 [xfs] Aug 16 09:33:40 kernel: [32521.931484] [<c108c2a5>] ? do_writepages+0x19/0x25 Aug 16 09:33:40 kernel: [32521.946648] [<c10c80d9>] ? writeback_single_inode+0xc7/0x273 Aug 16 09:33:40 kernel: [32521.961675] [<c10c8c44>] ? writeback_inodes_wb+0x3dd/0x49c Aug 16 09:33:40 kernel: [32521.976831] [<c10c8e18>] ? wb_writeback+0x115/0x178 Aug 16 09:33:40 kernel: [32521.991778] [<c10c901f>] ? wb_do_writeback+0x121/0x131 Aug 16 09:33:40 kernel: [32522.006538] [<c103abaf>] ? process_timeout+0x0/0x5 Aug 16 09:33:40 kernel: [32522.021091] [<c10c9050>] ? bdi_writeback_task+0x21/0x89 Aug 16 09:33:40 kernel: [32522.035493] [<c10979e5>] ? bdi_start_fn+0x59/0xa4 Aug 16 09:33:40 kernel: [32522.049765] [<c109798c>] ? bdi_start_fn+0x0/0xa4 Aug 16 09:33:40 kernel: [32522.063792] [<c1043588>] ? kthread+0x61/0x66 Aug 16 09:33:40 kernel: [32522.077612] [<c1043527>] ? kthread+0x0/0x66 Aug 16 09:33:40 kernel: [32522.091260] [<c1003d47>] ? kernel_thread_helper+0x7/0x10 Aug 16 09:33:40 kernel: [32522.104966] INFO: task smartctl:13098 blocked for more than 120 seconds. Aug 16 09:33:40 kernel: [32522.118883] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 16 09:33:40 kernel: [32522.133012] smartctl D 00000020 0 13098 13097 0x00000000 Aug 16 09:33:40 kernel: [32522.147221] e50b9540 00000086 c11d28a8 00000020 00000770 c1418100 c1418100 c14136ac Aug 16 09:33:40 kernel: [32522.161720] e50b96fc c2808100 00000000 e53e8800 00000000 00000020 c3cec000 c13886c0 Aug 16 09:33:40 kernel: [32522.176217] f99dab68 e50b96fc 007a4f1e 00000001 c4082f24 c4082ed8 00000001 c3c3f0e0 Aug 16 09:33:40 kernel: [32522.190737] Call Trace: Aug 16 09:33:40 kernel: [32522.205038] [<c11d28a8>] ? __netdev_alloc_skb+0x14/0x2d Aug 16 09:33:40 kernel: [32522.219605] [<c126b799>] ? schedule_timeout+0x20/0xb0 Aug 16 09:33:40 kernel: [32522.234144] [<c112820d>] ? blk_peek_request+0x112/0x143 Aug 16 09:33:40 kernel: [32522.248649] [<f85873b6>] ? scsi_request_fn+0x3c1/0x47a [scsi_mod] Aug 16 09:33:40 kernel: [32522.263233] [<c103aba8>] ? del_timer+0x55/0x5c Aug 16 09:33:40 kernel: [32522.277773] [<c126b6a2>] ? wait_for_common+0xa4/0x100 Aug 16 09:33:40 kernel: [32522.292342] [<c102cd8d>] ? default_wake_function+0x0/0x8 Aug 16 09:33:40 kernel: [32522.306958] [<c112b3d1>] ? blk_execute_rq+0x8b/0xb2 Aug 16 09:33:40 kernel: [32522.321569] [<c112b2ac>] ? blk_end_sync_rq+0x0/0x23 Aug 16 09:33:40 kernel: [32522.336070] [<c112b58b>] ? blk_recount_segments+0x13/0x20 Aug 16 09:33:40 kernel: [32522.350583] [<c1127307>] ? blk_rq_bio_prep+0x44/0x74 Aug 16 09:33:40 kernel: [32522.365059] [<c112b0b2>] ? blk_rq_map_kern+0xc5/0xee Aug 16 09:33:40 kernel: [32522.379439] [<c112e2a5>] ? sg_scsi_ioctl+0x221/0x2aa Aug 16 09:33:40 kernel: [32522.393801] [<c112e672>] ? scsi_cmd_ioctl+0x344/0x39a Aug 16 09:33:40 kernel: [32522.408140] [<c1024c87>] ? update_curr+0x106/0x1b3 Aug 16 09:33:40 kernel: [32522.422566] [<c1024c87>] ? update_curr+0x106/0x1b3 Aug 16 09:33:40 kernel: [32522.436832] [<f87676aa>] ? sd_ioctl+0x90/0xb5 [sd_mod] Aug 16 09:33:40 kernel: [32522.451228] [<c112c35f>] ? __blkdev_driver_ioctl+0x53/0x63 Aug 16 09:33:40 kernel: [32522.465689] [<c112cbbf>] ? blkdev_ioctl+0x850/0x891 Aug 16 09:33:40 kernel: [32522.479982] [<c1020474>] ? __wake_up_common+0x34/0x59 Aug 16 09:33:40 kernel: [32522.494138] [<c10244cd>] ? complete+0x28/0x36 Aug 16 09:33:40 kernel: [32522.507986] [<c1086c64>] ? find_get_page+0x1f/0x81 Aug 16 09:33:40 kernel: [32522.521671] [<c10abed5>] ? add_partial+0xe/0x40 Aug 16 09:33:40 kernel: [32522.535285] [<c1086e68>] ? lock_page+0x8/0x1d Aug 16 09:33:40 kernel: [32522.548797] [<c1087432>] ? filemap_fault+0xb5/0x2e6 Aug 16 09:33:40 kernel: [32522.562141] [<c109941c>] ? __do_fault+0x381/0x3b1 Aug 16 09:33:40 kernel: [32522.575441] [<c10d0c30>] ? block_ioctl+0x27/0x2c Aug 16 09:33:40 kernel: [32522.588708] [<c10d0c09>] ? block_ioctl+0x0/0x2c Aug 16 09:33:40 kernel: [32522.601858] [<c10bcd78>] ? vfs_ioctl+0x1c/0x5f Aug 16 09:33:40 kernel: [32522.614917] [<c10bd30c>] ? do_vfs_ioctl+0x4aa/0x4e5 Aug 16 09:33:40 kernel: [32522.627961] [<c10350db>] ? __do_softirq+0x115/0x151 Aug 16 09:33:40 kernel: [32522.640901] [<c126e270>] ? do_page_fault+0x2f1/0x307 Aug 16 09:33:40 kernel: [32522.653803] [<c10bd388>] ? sys_ioctl+0x41/0x58 Aug 16 09:33:40 kernel: [32522.666674] [<c10030fb>] ? sysenter_do_call+0x12/0x28 Then again few messages reset high speed USB device using ehci_hcd and address 2. I have browsed and read similar error reports here and there and I tried: I have upgraded the kernel from v2.6.26-2 to 2.6.32-5, which has not solved the problem. They say, this might a cable problem. I have tried to replace the USB-to-miniUSB cable (that connects external drive with computer) with another one. No changes. Somebody suggests to try another USB port. I have only 4 external USB ports, tried another one with no success. They say to try uhci_hcd. I have unmounted the device, unloaded ehci_hcd and mounted again. The difference was that now in log I get reset full speed USB device using uhci_hcd and address 2 and similar kernel dumps after a while. They say to echo 128 > /sys/block/sdb/device/max_sectors. I tried it with ehci_hcd with no success (note: I have issued this command after the drive was mounted but before using it actively). I have lauched smartmond and checking periodically the output of smartctl: drive temperature is OK, number of bad sectors and uncorrectable errors is 0. Nothing suspicious is reported by S.M.A.R.T. except maybe the following: Aug 16 12:40:12 kernel: [43715.314566] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO Aug 16 12:40:13 kernel: [43715.705622] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO Of course, I have not tried all combinations of above. But unfortunately, I am run out of cardinal ideas. If anybody can advice something specific about the problem, you are very welcome.

    Read the article

  • LSI 9285-8e and Supermicro SC837E26-RJBOD1 duplicate enclosure ID and slot numbers

    - by Andy Shinn
    I am working with 2 x Supermicro SC837E26-RJBOD1 chassis connected to a single LSI 9285-8e card in a Supermicro 1U host. There are 28 drives in each chassis for a total of 56 drives in 28 RAID1 mirrors. The problem I am running in to is that there are duplicate slots for the 2 chassis (the slots list twice and only go from 0 to 27). All the drives also show the same enclosure ID (ID 36). However, MegaCLI -encinfo lists the 2 enclosures correctly (ID 36 and ID 65). My question is, why would this happen? Is there an option I am missing to use 2 enclosures effectively? This is blocking me rebuilding a drive that failed in slot 11 since I can only specify enclosure and slot as parameters to replace a drive. When I do this, it picks the wrong slot 11 (device ID 46 instead of device ID 19). Adapter #1 is the LSI 9285-8e, adapter #0 (which I removed due to space limitations) is the onboard LSI. Adapter information: Adapter #1 ============================================================================== Versions ================ Product Name : LSI MegaRAID SAS 9285-8e Serial No : SV12704804 FW Package Build: 23.1.1-0004 Mfg. Data ================ Mfg. Date : 06/30/11 Rework Date : 00/00/00 Revision No : 00A Battery FRU : N/A Image Versions in Flash: ================ BIOS Version : 5.25.00_4.11.05.00_0x05040000 WebBIOS Version : 6.1-20-e_20-Rel Preboot CLI Version: 05.01-04:#%00001 FW Version : 3.140.15-1320 NVDATA Version : 2.1106.03-0051 Boot Block Version : 2.04.00.00-0001 BOOT Version : 06.253.57.219 Pending Images in Flash ================ None PCI Info ================ Vendor Id : 1000 Device Id : 005b SubVendorId : 1000 SubDeviceId : 9285 Host Interface : PCIE ChipRevision : B0 Number of Frontend Port: 0 Device Interface : PCIE Number of Backend Port: 8 Port : Address 0 5003048000ee8e7f 1 5003048000ee8a7f 2 0000000000000000 3 0000000000000000 4 0000000000000000 5 0000000000000000 6 0000000000000000 7 0000000000000000 HW Configuration ================ SAS Address : 500605b0038f9210 BBU : Present Alarm : Present NVRAM : Present Serial Debugger : Present Memory : Present Flash : Present Memory Size : 1024MB TPM : Absent On board Expander: Absent Upgrade Key : Absent Temperature sensor for ROC : Present Temperature sensor for controller : Absent ROC temperature : 70 degree Celcius Settings ================ Current Time : 18:24:36 3/13, 2012 Predictive Fail Poll Interval : 300sec Interrupt Throttle Active Count : 16 Interrupt Throttle Completion : 50us Rebuild Rate : 30% PR Rate : 30% BGI Rate : 30% Check Consistency Rate : 30% Reconstruction Rate : 30% Cache Flush Interval : 4s Max Drives to Spinup at One Time : 2 Delay Among Spinup Groups : 12s Physical Drive Coercion Mode : Disabled Cluster Mode : Disabled Alarm : Enabled Auto Rebuild : Enabled Battery Warning : Enabled Ecc Bucket Size : 15 Ecc Bucket Leak Rate : 1440 Minutes Restore HotSpare on Insertion : Disabled Expose Enclosure Devices : Enabled Maintain PD Fail History : Enabled Host Request Reordering : Enabled Auto Detect BackPlane Enabled : SGPIO/i2c SEP Load Balance Mode : Auto Use FDE Only : No Security Key Assigned : No Security Key Failed : No Security Key Not Backedup : No Default LD PowerSave Policy : Controller Defined Maximum number of direct attached drives to spin up in 1 min : 10 Any Offline VD Cache Preserved : No Allow Boot with Preserved Cache : No Disable Online Controller Reset : No PFK in NVRAM : No Use disk activity for locate : No Capabilities ================ RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span Supported Drives : SAS, SATA Allowed Mixing: Mix in Enclosure Allowed Mix of SAS/SATA of HDD type in VD Allowed Status ================ ECC Bucket Count : 0 Limitations ================ Max Arms Per VD : 32 Max Spans Per VD : 8 Max Arrays : 128 Max Number of VDs : 64 Max Parallel Commands : 1008 Max SGE Count : 60 Max Data Transfer Size : 8192 sectors Max Strips PerIO : 42 Max LD per array : 16 Min Strip Size : 8 KB Max Strip Size : 1.0 MB Max Configurable CacheCade Size: 0 GB Current Size of CacheCade : 0 GB Current Size of FW Cache : 887 MB Device Present ================ Virtual Drives : 28 Degraded : 0 Offline : 0 Physical Devices : 59 Disks : 56 Critical Disks : 0 Failed Disks : 0 Supported Adapter Operations ================ Rebuild Rate : Yes CC Rate : Yes BGI Rate : Yes Reconstruct Rate : Yes Patrol Read Rate : Yes Alarm Control : Yes Cluster Support : No BBU : No Spanning : Yes Dedicated Hot Spare : Yes Revertible Hot Spares : Yes Foreign Config Import : Yes Self Diagnostic : Yes Allow Mixed Redundancy on Array : No Global Hot Spares : Yes Deny SCSI Passthrough : No Deny SMP Passthrough : No Deny STP Passthrough : No Support Security : No Snapshot Enabled : No Support the OCE without adding drives : Yes Support PFK : Yes Support PI : No Support Boot Time PFK Change : Yes Disable Online PFK Change : No PFK TrailTime Remaining : 0 days 0 hours Support Shield State : Yes Block SSD Write Disk Cache Change: Yes Supported VD Operations ================ Read Policy : Yes Write Policy : Yes IO Policy : Yes Access Policy : Yes Disk Cache Policy : Yes Reconstruction : Yes Deny Locate : No Deny CC : No Allow Ctrl Encryption: No Enable LDBBM : No Support Breakmirror : No Power Savings : Yes Supported PD Operations ================ Force Online : Yes Force Offline : Yes Force Rebuild : Yes Deny Force Failed : No Deny Force Good/Bad : No Deny Missing Replace : No Deny Clear : No Deny Locate : No Support Temperature : Yes Disable Copyback : No Enable JBOD : No Enable Copyback on SMART : No Enable Copyback to SSD on SMART Error : Yes Enable SSD Patrol Read : No PR Correct Unconfigured Areas : Yes Enable Spin Down of UnConfigured Drives : Yes Disable Spin Down of hot spares : No Spin Down time : 30 T10 Power State : Yes Error Counters ================ Memory Correctable Errors : 0 Memory Uncorrectable Errors : 0 Cluster Information ================ Cluster Permitted : No Cluster Active : No Default Settings ================ Phy Polarity : 0 Phy PolaritySplit : 0 Background Rate : 30 Strip Size : 64kB Flush Time : 4 seconds Write Policy : WB Read Policy : Adaptive Cache When BBU Bad : Disabled Cached IO : No SMART Mode : Mode 6 Alarm Disable : Yes Coercion Mode : None ZCR Config : Unknown Dirty LED Shows Drive Activity : No BIOS Continue on Error : No Spin Down Mode : None Allowed Device Type : SAS/SATA Mix Allow Mix in Enclosure : Yes Allow HDD SAS/SATA Mix in VD : Yes Allow SSD SAS/SATA Mix in VD : No Allow HDD/SSD Mix in VD : No Allow SATA in Cluster : No Max Chained Enclosures : 16 Disable Ctrl-R : Yes Enable Web BIOS : Yes Direct PD Mapping : No BIOS Enumerate VDs : Yes Restore Hot Spare on Insertion : No Expose Enclosure Devices : Yes Maintain PD Fail History : Yes Disable Puncturing : No Zero Based Enclosure Enumeration : No PreBoot CLI Enabled : Yes LED Show Drive Activity : Yes Cluster Disable : Yes SAS Disable : No Auto Detect BackPlane Enable : SGPIO/i2c SEP Use FDE Only : No Enable Led Header : No Delay during POST : 0 EnableCrashDump : No Disable Online Controller Reset : No EnableLDBBM : No Un-Certified Hard Disk Drives : Allow Treat Single span R1E as R10 : No Max LD per array : 16 Power Saving option : Don't Auto spin down Configured Drives Max power savings option is not allowed for LDs. Only T10 power conditions are to be used. Default spin down time in minutes: 30 Enable JBOD : No TTY Log In Flash : No Auto Enhanced Import : No BreakMirror RAID Support : No Disable Join Mirror : No Enable Shield State : Yes Time taken to detect CME : 60s Exit Code: 0x00 Enclosure information: # /opt/MegaRAID/MegaCli/MegaCli64 -encinfo -a1 Number of enclosures on adapter 1 -- 3 Enclosure 0: Device ID : 36 Number of Slots : 28 Number of Power Supplies : 2 Number of Fans : 3 Number of Temperature Sensors : 1 Number of Alarms : 1 Number of SIM Modules : 0 Number of Physical Drives : 28 Status : Normal Position : 1 Connector Name : Port B Enclosure type : SES VendorId is LSI CORP and Product Id is SAS2X36 VendorID and Product ID didnt match FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : 65 Inquiry data : Vendor Identification : LSI CORP Product Identification : SAS2X36 Product Revision Level : 0718 Vendor Specific : x36-55.7.24.1 Number of Voltage Sensors :2 Voltage Sensor :0 Voltage Sensor Status :OK Voltage Value :5020 milli volts Voltage Sensor :1 Voltage Sensor Status :OK Voltage Value :11820 milli volts Number of Power Supplies : 2 Power Supply : 0 Power Supply Status : OK Power Supply : 1 Power Supply Status : OK Number of Fans : 3 Fan : 0 Fan Speed :Low Speed Fan Status : OK Fan : 1 Fan Speed :Low Speed Fan Status : OK Fan : 2 Fan Speed :Low Speed Fan Status : OK Number of Temperature Sensors : 1 Temp Sensor : 0 Temperature : 48 Temperature Sensor Status : OK Number of Chassis : 1 Chassis : 0 Chassis Status : OK Enclosure 1: Device ID : 65 Number of Slots : 28 Number of Power Supplies : 2 Number of Fans : 3 Number of Temperature Sensors : 1 Number of Alarms : 1 Number of SIM Modules : 0 Number of Physical Drives : 28 Status : Normal Position : 1 Connector Name : Port A Enclosure type : SES VendorId is LSI CORP and Product Id is SAS2X36 VendorID and Product ID didnt match FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : 36 Inquiry data : Vendor Identification : LSI CORP Product Identification : SAS2X36 Product Revision Level : 0718 Vendor Specific : x36-55.7.24.1 Number of Voltage Sensors :2 Voltage Sensor :0 Voltage Sensor Status :OK Voltage Value :5020 milli volts Voltage Sensor :1 Voltage Sensor Status :OK Voltage Value :11760 milli volts Number of Power Supplies : 2 Power Supply : 0 Power Supply Status : OK Power Supply : 1 Power Supply Status : OK Number of Fans : 3 Fan : 0 Fan Speed :Low Speed Fan Status : OK Fan : 1 Fan Speed :Low Speed Fan Status : OK Fan : 2 Fan Speed :Low Speed Fan Status : OK Number of Temperature Sensors : 1 Temp Sensor : 0 Temperature : 47 Temperature Sensor Status : OK Number of Chassis : 1 Chassis : 0 Chassis Status : OK Enclosure 2: Device ID : 252 Number of Slots : 8 Number of Power Supplies : 0 Number of Fans : 0 Number of Temperature Sensors : 0 Number of Alarms : 0 Number of SIM Modules : 1 Number of Physical Drives : 0 Status : Normal Position : 1 Connector Name : Unavailable Enclosure type : SGPIO Failed in first Inquiry commnad FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : Unavailable Inquiry data : Vendor Identification : LSI Product Identification : SGPIO Product Revision Level : N/A Vendor Specific : Exit Code: 0x00 Now, notice that each slot 11 device shows an enclosure ID of 36, I think this is where the discrepancy happens. One should be 36. But the other should be on enclosure 65. Drives in slot 11: Enclosure Device ID: 36 Slot Number: 11 Drive's postion: DiskGroup: 5, Span: 0, Arm: 1 Enclosure position: 0 Device Id: 48 WWN: Sequence Number: 11 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 2.728 TB [0x15d50a3b0 Sectors] Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors] Coerced Size: 2.728 TB [0x15d400000 Sectors] Firmware state: Online, Spun Up Is Commissioned Spare : YES Device Firmware Level: A5C0 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x5003048000ee8a53 Connected Port Number: 1(path0) Inquiry Data: MJ1311YNG6YYXAHitachi HDS5C3030ALA630 MEAOA5C0 FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :30C (86.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's write cache : Disabled Drive's NCQ setting : Enabled Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Enclosure Device ID: 36 Slot Number: 11 Drive's postion: DiskGroup: 19, Span: 0, Arm: 1 Enclosure position: 0 Device Id: 19 WWN: Sequence Number: 4 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 2.728 TB [0x15d50a3b0 Sectors] Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors] Coerced Size: 2.728 TB [0x15d400000 Sectors] Firmware state: Online, Spun Up Is Commissioned Spare : NO Device Firmware Level: A580 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x5003048000ee8e53 Connected Port Number: 0(path0) Inquiry Data: MJ1313YNG1VA5CHitachi HDS5C3030ALA630 MEAOA580 FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :30C (86.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's write cache : Disabled Drive's NCQ setting : Enabled Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Update 06/28/12: I finally have some new information about (what we think) the root cause of this problem so I thought I would share. After getting in contact with a very knowledgeable Supermicro tech, they provided us with a tool called Xflash (doesn't appear to be readily available on their FTP). When we gathered some information using this utility, my colleague found something very strange: root@mogile2 test]# ./xflash.dat -i get avail Initializing Interface. Expander: SAS2X36 (SAS2x36) 1) SAS2X36 (SAS2x36) (50030480:00EE917F) (0.0.0.0) 2) SAS2X36 (SAS2x36) (50030480:00E9D67F) (0.0.0.0) 3) SAS2X36 (SAS2x36) (50030480:0112D97F) (0.0.0.0) This lists the connected enclosures. You see the 3 connected (we have since added a 3rd and a 4th which is not yet showing up) with their respective SAS address / WWN (50030480:00EE917F). Now we can use this address to get information on the individual enclosures: [root@mogile2 test]# ./xflash.dat -i 5003048000EE917F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:00EE917F Enclosure Logical Id: 50030480:0000007F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 [root@mogile2 test]# ./xflash.dat -i 5003048000E9D67F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:00E9D67F Enclosure Logical Id: 50030480:0000007F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 [root@mogile2 test]# ./xflash.dat -i 500304800112D97F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:0112D97F Enclosure Logical Id: 50030480:0112D97F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 Did you catch it? The first 2 enclosures logical ID is partially masked out where the 3rd one (which has a correct unique enclosure ID) is not. We pointed this out to Supermicro and were able to confirm that this address is supposed to be set during manufacturing and there was a problem with a certain batch of these enclosures where the logical ID was not set. We believe that the RAID controller is determining the ID based on the logical ID and since our first 2 enclosures have the same logical ID, they get the same enclosure ID. We also confirmed that 0000007F is the default which comes from LSI as an ID. The next pointer that helps confirm this could be a manufacturing problem with a run of JBODs is the fact that all 6 of the enclosures that have this problem begin with 00E. I believe that between 00E8 and 00EE Supermicro forgot to program the logical IDs correctly and neglected to recall or fix the problem post production. Fortunately for us, there is a tool to manage the WWN and logical ID of the devices from Supermicro: ftp://ftp.supermicro.com/utility/ExpanderXtools_Lite/. Our next step is to schedule a shutdown of these JBODs (after data migration) and reprogram the logical ID and see if it solves the problem. Update 06/28/12 #2: I just discovered this FAQ at Supermicro while Google searching for "lsi 0000007f": http://www.supermicro.com/support/faqs/faq.cfm?faq=11805. I still don't understand why, in the last several times we contacted Supermicro, they would have never directed us to this article :\

    Read the article

  • Why does my motherboard go through an endless reboot cycle when 8 GB of memory is attempted vs 6 GB?

    - by nizm0
    I never got an answer in my googling to this about a year ago and have an extra stick of memory I'd like to be able to use. When is inserted the computer starts, and then reboots immediately in an endless reboot cycle. As soon as the 4th stick is removed, the computer works fine. Right now I have 6 GB of my 8 GB installed. Is there a solution that I am missing to enabling this motherboard to actually boot up with all 8 GB (it supports it). Right now it won't even boot up to BIOS with the 4 sticks... only 3? Memory: 1 x G.SKILL 4 GB (2 x 2 GB) 240-Pin DDR2 SDRAM DDR2 1100 (PC2 8800) Dual Channel Kit Desktop Memory Model F2-8800CL5D-4GBPI - Retail (URL: ) http://www.newegg.com/Product/Product.aspx?Item=N82E16820231194 Motherboard: 1 x GIGABYTE GA-EP45-UD3R LGA 775 Intel P45 ATX Intel Motherboard - Retail ( URL: )http://www.newegg.com/Product/Product.aspx?Item=N82E16813128359

    Read the article

  • HP D2D 4312 Bacula configuration

    - by krisdigitx
    I have configured 5 libraries on the HP D2D system Discovery on the Bacula server shows only the last library and not all libraries. Why? [root@server bacula]# iscsiadm --mode discovery --type sendtargets --portal 10.66.59.114 10.66.59.114:3260,1 iqn.1986-03.com.hp:storage.d2dbs.czj2020vvy.50014380075dca5e.library12.drive1 10.66.59.114:3260,1 iqn.1986-03.com.hp:storage.d2dbs.czj2020vvy.50014380075dcaf2.library12.robotics I can query it fine using... [root@server bacula]# mtx -f /dev/sg2 inquiry Product Type: Tape Drive Vendor ID: 'HP ' Product ID: 'Ultrium 5-SCSI ' Revision: 'ED51' Attached Changer API: No [root@bray bacula]# mtx -f /dev/sg3 inquiry Product Type: Medium Changer Vendor ID: 'HP ' Product ID: 'MSL G3 Series ' Revision: 'EL41' Attached Changer API: No [root@server bacula]# mtx -f /dev/sg3 status Storage Changer /dev/sg3:1 Drives, 97 Slots ( 1 Import/Export ) Data Transfer Element 0:Empty Storage Element 1:Full :VolumeTag=50507F82 Storage Element 2:Full :VolumeTag=50507F83 Storage Element 3:Full :VolumeTag=50507F84 Storage Element 4:Full :VolumeTag=50507F85 Storage Element 5:Full :VolumeTag=50507F86 Storage Element 6:Full :VolumeTag=50507F87 Storage Element 7:Full :VolumeTag=50507F88 Does anyone have any good documentation for implementing Bacula with an HP D2D tape drive for server backups, and how to allocate libraries?

    Read the article

  • Differences between FCKeditor and CKeditor?

    - by matt74tm
    Sorry, but I've not been able to locate anything (even on the official pages) informing me of the differences between the two versions. Even a query on their official forum has been unanswered for many months - http://cksource.com/forums/viewtopic.php?f=11&t=17986&start=0 The license page talks a bit about the "internal" differences http://ckeditor.com/license CKEditor Commercial License - CKSource Closed Distribution License - CDL ... This license offers a very flexible way to integrate CKEditor in your commercial application. These are the main advantages it offers over an Open Source license: * Modifications and enhancements doesn't need to be released under an Open Source license; * There is no need to distribute any Open Source license terms alongside with your product and no reference to it have to be done; * No references to CKEditor have to be done in any file distributed with your product; * The source code of CKEditor doesn’t have to be distributed alongside with your product; * You can remove any file from CKEditor when integrating it with your product.

    Read the article

  • Printing a dynamic sheet as one document

    - by Sux2Lose
    I have a spreadsheet structured as follows: Summary section at the top Detail section on the bottom Summary section summarizes the detail section which is filtered using auto filters There are ten products that all need to be printed individually, but I want the page footer to show the overall page position of all the print jobs and the total number of pages. That is probably not clear. So for example, if I print the two page Product A view it will print page 1 of 2 and 2 of 2. If I print the one page Product B it will show page 1 of 1. What I want is to print both and have Product A show Page 1 of 3, Page 2 of 3, and Product B be Page 3 of 3. Is there any way to accomplish this?

    Read the article

  • What would multiple serial ports be used for?

    - by jasondavis
    I saw someone was using something like the card in the link below on there system for some networking gear on their pc. I am very curious what a person would need 8 serial ports for. What kind of stuff uses this? http://www.newegg.com/Product/Product.aspx?Item=N82E16815124041&cm_re=serial_card--15-124-041--Product

    Read the article

  • Cannot reinstall Windows on Toughbook CF-19, OEM or upgrade issue?

    - by j03lar50n
    My Toughbook (CF-19) has a 'Windows Vista Business OEMAct, Panasonic' COA on the bottom of the unit. When I extracted the key before reformatting - it was a 'Windows XP Professional' Product Name and the Product ID code has 'OEM' in it...and I can confirm this upgrade was last OS installed (w/ Service Pack 3) - but there was the tablet functionality. This extracted product key isn't working with any version of Windows I try installing. XP Pro, XP Pro Tablet 2005 OEM, Tablet XP OEM. Any insights?

    Read the article

  • Configuring OpenLDAP and SSL

    - by Stormshadow
    I am having trouble trying to connect to a secure OpenLDAP server which I have set up. On running my LDAP client code java -Djavax.net.debug=ssl LDAPConnector I get the following exception trace (java version 1.6.0_17) trigger seeding of SecureRandom done seeding SecureRandom %% No cached client session *** ClientHello, TLSv1 RandomCookie: GMT: 1256110124 bytes = { 224, 19, 193, 148, 45, 205, 108, 37, 101, 247, 112, 24, 157, 39, 111, 177, 43, 53, 206, 224, 68, 165, 55, 185, 54, 203, 43, 91 } Session ID: {} Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, SSL_RSA_W ITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SH A, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA] Compression Methods: { 0 } *** Thread-0, WRITE: TLSv1 Handshake, length = 73 Thread-0, WRITE: SSLv2 client hello message, length = 98 Thread-0, received EOFException: error Thread-0, handling exception: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake Thread-0, SEND TLSv1 ALERT: fatal, description = handshake_failure Thread-0, WRITE: TLSv1 Alert, length = 2 Thread-0, called closeSocket() main, handling exception: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake javax.naming.CommunicationException: simple bind failed: ldap.natraj.com:636 [Root exception is javax.net.ssl.SSLHandshakeException: Remote host closed connection during hands hake] at com.sun.jndi.ldap.LdapClient.authenticate(Unknown Source) at com.sun.jndi.ldap.LdapCtx.connect(Unknown Source) at com.sun.jndi.ldap.LdapCtx.<init>(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(Unknown Source) at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(Unknown Source) at javax.naming.spi.NamingManager.getInitialContext(Unknown Source) at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source) at javax.naming.InitialContext.init(Unknown Source) at javax.naming.InitialContext.<init>(Unknown Source) at javax.naming.directory.InitialDirContext.<init>(Unknown Source) at LDAPConnector.CallSecureLDAPServer(LDAPConnector.java:43) at LDAPConnector.main(LDAPConnector.java:237) Caused by: javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source) at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord(Unknown Source) at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source) at java.io.BufferedInputStream.fill(Unknown Source) at java.io.BufferedInputStream.read1(Unknown Source) at java.io.BufferedInputStream.read(Unknown Source) at com.sun.jndi.ldap.Connection.run(Unknown Source) at java.lang.Thread.run(Unknown Source) Caused by: java.io.EOFException: SSL peer shut down incorrectly at com.sun.net.ssl.internal.ssl.InputRecord.read(Unknown Source) ... 9 more I am able to connect to the same secure LDAP server however if I use another version of java (1.6.0_14) I have created and installed the server certificates in the cacerts of both the JRE's as mentioned in this guide -- OpenLDAP with SSL When I run ldapsearch -x on the server I get # extended LDIF # # LDAPv3 # base <dc=localdomain> (default) with scope subtree # filter: (objectclass=*) # requesting: ALL # # localdomain dn: dc=localdomain objectClass: top objectClass: dcObject objectClass: organization o: localdomain dc: localdomain # admin, localdomain dn: cn=admin,dc=localdomain objectClass: simpleSecurityObject objectClass: organizationalRole cn: admin description: LDAP administrator # search result search: 2 result: 0 Success # numResponses: 3 # numEntries: 2 On running openssl s_client -connect ldap.natraj.com:636 -showcerts , I obtain the self signed certificate. My slapd.conf file is as follows ####################################################################### # Global Directives: # Features to permit #allow bind_v2 # Schema and objectClass definitions include /etc/ldap/schema/core.schema include /etc/ldap/schema/cosine.schema include /etc/ldap/schema/nis.schema include /etc/ldap/schema/inetorgperson.schema # Where the pid file is put. The init.d script # will not stop the server if you change this. pidfile /var/run/slapd/slapd.pid # List of arguments that were passed to the server argsfile /var/run/slapd/slapd.args # Read slapd.conf(5) for possible values loglevel none # Where the dynamically loaded modules are stored modulepath /usr/lib/ldap moduleload back_hdb # The maximum number of entries that is returned for a search operation sizelimit 500 # The tool-threads parameter sets the actual amount of cpu's that is used # for indexing. tool-threads 1 ####################################################################### # Specific Backend Directives for hdb: # Backend specific directives apply to this backend until another # 'backend' directive occurs backend hdb ####################################################################### # Specific Backend Directives for 'other': # Backend specific directives apply to this backend until another # 'backend' directive occurs #backend <other> ####################################################################### # Specific Directives for database #1, of type hdb: # Database specific directives apply to this databasse until another # 'database' directive occurs database hdb # The base of your directory in database #1 suffix "dc=localdomain" # rootdn directive for specifying a superuser on the database. This is needed # for syncrepl. rootdn "cn=admin,dc=localdomain" # Where the database file are physically stored for database #1 directory "/var/lib/ldap" # The dbconfig settings are used to generate a DB_CONFIG file the first # time slapd starts. They do NOT override existing an existing DB_CONFIG # file. You should therefore change these settings in DB_CONFIG directly # or remove DB_CONFIG and restart slapd for changes to take effect. # For the Debian package we use 2MB as default but be sure to update this # value if you have plenty of RAM dbconfig set_cachesize 0 2097152 0 # Sven Hartge reported that he had to set this value incredibly high # to get slapd running at all. See http://bugs.debian.org/303057 for more # information. # Number of objects that can be locked at the same time. dbconfig set_lk_max_objects 1500 # Number of locks (both requested and granted) dbconfig set_lk_max_locks 1500 # Number of lockers dbconfig set_lk_max_lockers 1500 # Indexing options for database #1 index objectClass eq # Save the time that the entry gets modified, for database #1 lastmod on # Checkpoint the BerkeleyDB database periodically in case of system # failure and to speed slapd shutdown. checkpoint 512 30 # Where to store the replica logs for database #1 # replogfile /var/lib/ldap/replog # The userPassword by default can be changed # by the entry owning it if they are authenticated. # Others should not be able to see it, except the # admin entry below # These access lines apply to database #1 only access to attrs=userPassword,shadowLastChange by dn="cn=admin,dc=localdomain" write by anonymous auth by self write by * none # Ensure read access to the base for things like # supportedSASLMechanisms. Without this you may # have problems with SASL not knowing what # mechanisms are available and the like. # Note that this is covered by the 'access to *' # ACL below too but if you change that as people # are wont to do you'll still need this if you # want SASL (and possible other things) to work # happily. access to dn.base="" by * read # The admin dn has full write access, everyone else # can read everything. access to * by dn="cn=admin,dc=localdomain" write by * read # For Netscape Roaming support, each user gets a roaming # profile for which they have write access to #access to dn=".*,ou=Roaming,o=morsnet" # by dn="cn=admin,dc=localdomain" write # by dnattr=owner write ####################################################################### # Specific Directives for database #2, of type 'other' (can be hdb too): # Database specific directives apply to this databasse until another # 'database' directive occurs #database <other> # The base of your directory for database #2 #suffix "dc=debian,dc=org" ####################################################################### # SSL: # Uncomment the following lines to enable SSL and use the default # snakeoil certificates. #TLSCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem #TLSCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key TLSCipherSuite TLS_RSA_AES_256_CBC_SHA TLSCACertificateFile /etc/ldap/ssl/server.pem TLSCertificateFile /etc/ldap/ssl/server.pem TLSCertificateKeyFile /etc/ldap/ssl/server.pem My ldap.conf file is # # LDAP Defaults # # See ldap.conf(5) for details # This file should be world readable but not world writable. HOST ldap.natraj.com PORT 636 BASE dc=localdomain URI ldaps://ldap.natraj.com TLS_CACERT /etc/ldap/ssl/server.pem TLS_REQCERT allow #SIZELIMIT 12 #TIMELIMIT 15 #DEREF never Why is it that I can connect to the same server using one version of JRE while I cannot with another ?

    Read the article

  • Google respond differently to two identical nginx setups and 200 codes; any ideas?

    - by Yuji Tomita
    I'm rather confused... I have a linode.com VPS which has been cloned recently, so the settings are the same between nginx servers. One lives on a dev subdomain, one on a www. I'm trying to run a google experiment on my live server, which claims: Web server rejects utm_expid. Your server doesn't support added query arguments in URLs. My logs show on the dev server where it works: 74.125.186.32 - - [13/Sep/2012:13:33:45 -0700] "GET /product/iphone-case/?utm_expid=25706866-0 HTTP/1.1" 200 12521 "-" "Google_Analytics_Content_Experiments 74.125.186.32 - - [13/Sep/2012:13:33:45 -0700] "GET /product/iphone-case/?ab_reviews=True&utm_expid=25706866-0 HTTP/1.1" 200 14679 "-" "Google_Analytics_Content_Experiments My production server shows google making a second request. 74.125.186.41 - - [13/Sep/2012:13:34:49 -0700] "GET /product/iphone-case/?ab_reviews=on&utm_expid=25706866-1 HTTP/1.1" 200 12104 "-" "Google_Analytics_Content_Experiments 74.125.186.41 - - [13/Sep/2012:13:34:49 -0700] "GET /product/iphone-case/?utm_expid=25706866-1 HTTP/1.1" 200 12122 "-" "Google_Analytics_Content_Experiments 74.125.186.41 - - [13/Sep/2012:13:34:49 -0700] "GET /product/iphone-case/ <--- A second request for some reason. HTTP/1.1" 200 12522 "-" "Google_Analytics_Content_Experiments I'm not sure how google determines why it needs to send a second request without the querystring. The original request has clearly sent a 200 OK status response. Does anybody have any suggestions where to look next? The HTML (compared by diff) on the two pages is exactly the same.

    Read the article

  • Remote Wonder II or similar under Windows 7 64-bit

    - by Albert
    Under XP I could use a Remote Wonder II from ATI to control my music (play, pause, next, previous, etc). This product does not work under Windows 7 64-bit because of driver issues and it seems to be an orphan product. My question is: Does a similar product exist that works under Windows 7 64-bit???

    Read the article

  • How to remove registration information of VS 2010 from a computer without reinstall Windows

    - by Ronaldo Junior
    I want to remove visual studio 2010 from a computer i am selling but even after uninstall, it looks like my product key is still around - if you re-install it it will use the product key... How do I remove that registration info from the computer as I don't want the new owner of the computer to use my product key. And I don't want to have to uninstall Windows. PS.: The question was asked on StackOverflow but I was advised to put the question here for being more related.

    Read the article

  • Directory Not Found Error

    - by noobguy
    I am trying to verify tails and when I get to the command prompt portion of the verification some difficulties seem to have arose. Below is the script: noob@noob-System-Product-Name:~$ cd [/media/noob/UUI] bash: cd: [/media/noob/UUI]: No such file or directory noob@noob-System-Product-Name:~$ gpg --keyid-format long --import tails-signing.key gpg: can't open `tails-signing.key': No such file or directory gpg: Total number processed: 0 Same thing happens when I try from download directory; noob@noob-System-Product-Name:~$ cd [/home/noob/Downloads] bash: cd: [/home/noob/Downloads]: No such file or directory noob@noob-System-Product-Name:~$ gpg --keyid-format long --import tails-signing.key gpg: can't open `tails-signing.key': No such file or directory gpg: Total number processed: 0 Any suggestions would be greatly appreciated.

    Read the article

  • How do you google bad reviews? [closed]

    - by zlog
    The first thing I like to do before I make technology choices or gadget purchases is find bad reviews of the things. That way, taking into consideration of the potential biases of the reviewer, I can evaluate the product/service for the worse it can be. How do people google (or search in general) for bad reviews? I usually just try googling "bad review [product/service]" or "[product/service] sucks", but I'm sure there are better ways.

    Read the article

  • Script to gather all the files ending in .log and create a tar.gz file.

    - by Oscar Reyes
    I'm currently using this script line to find all the log files from a given directory structure and copy them to another directy where I can easily compress them. find . -name "*.log" -exec cp \{\} /tmp/allLogs/ \; The problem I have, is, the directory/subdirectory information gets lost because, I'm copying only the file. For instance I have: ./product/install/install.log ./product/execution/daily.log ./other/conf/blah.log And I end up with: /tmp/allLogs/install.log /tmp/allLogs/daily.log /tmp/allLogs/blah.log And I would like to have: /tmp/allLogs/product/install/install.log /tmp/allLogs/product/execution/daily.log /tmp/allLogs/other/conf/blah.log

    Read the article

  • Differences between FCKeditor and CKeditor?

    - by matt74tm
    Sorry, but I've not been able to locate anything (even on the official pages) informing me of the differences between the two versions. Even a query on their official forum has been unanswered for many months - http://cksource.com/forums/viewtopic.php?f=11&t=17986&start=0 The license page talks a bit about the "internal" differences http://ckeditor.com/license CKEditor Commercial License - CKSource Closed Distribution License - CDL ... This license offers a very flexible way to integrate CKEditor in your commercial application. These are the main advantages it offers over an Open Source license: * Modifications and enhancements doesn't need to be released under an Open Source license; * There is no need to distribute any Open Source license terms alongside with your product and no reference to it have to be done; * No references to CKEditor have to be done in any file distributed with your product; * The source code of CKEditor doesn’t have to be distributed alongside with your product; * You can remove any file from CKEditor when integrating it with your product.

    Read the article

  • rsync invocation to replace symlinks pointing to source?

    - by bdbaddog
    Currently I'm moving a big filesystem to a new server as the original fileserver is no longer able to handle the filesystem writes. To make this quick I made symlinks at the target filesystem pointing to the original filesystem. Initially: /company/release (mountpoint of the original filesystem) After migration: /company/release.old (points to original filesystem after automount map update) /company/release (points to new fileserver/filesystem after automount map update) In /company/release there are symlinks like the following: /company/release/product-1.0.tar.gz - /company/release.old/product-1.0.tar.gz /company/release/product-1.0 - /company/release.old/product-1.0 (this is a tree of files) Using symlinks allowed me to move the writes to the new filesystem quickly. Now I'd like to slowly migrate the existing files and directories to the new filesystem. The problem I'm running into is that since the symlinks point back at the original files rsync doesn't see any difference and so it doesn't actually copy the file(s) or directory(s) and remove/overwrite the symlinks. Is there a set of rsync flags which will do what I want?

    Read the article

  • Request exceeded the limit of 10

    - by Webnet
    My logs are FULL of [Tue Jan 11 10:20:45 2011] [error] [client 99.162.115.123] Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace., referer: https://www.domain.com/vehicles/Chevrolet/Uplander/2006 The problem is when I enable LogLevel debug we get HUGE error logs because all of our traffic is SSL. From what I can tell the file doesn't record these errors anymore, either that or it's so buried in SSL logs that I just can't find them. Here's my .htaccess Options -indexes RewriteEngine On RewriteRule ^battery/([^/]+)$ /browser/product?sku=BATTERY+$1&type=battery RewriteRule ^vehicles/([^/]+)/([^/]+)/([^/]+)/product([0-9]+)$ /browser/index.php?make=$1&model=$2&id=$3&%{QUERY_STRING} [L,NC] RewriteRule ^vehicles/([^/]+)/([^/]+)/([^/]+)/([0-9]+)$ /browser/product.php?make=$1&model=$2&year=$3&id=$4&%{QUERY_STRING} [L,NC] RewriteRule ^vehicles/([^/]+)/([^/]+)/([^/]+)$ /store/product/list.php?make=$1&model=$2&year=$3&%{QUERY_STRING} [L,NC] RewriteRule ^vehicles/([^/]+)/([^/]+)$ /vehicle/make/model/year/list.php?make=$1&model=$2&%{QUERY_STRING} [L,NC] RewriteRule ^vehicles/([^/]+)$ /vehicle/make/model/list.php?make=$1&%{QUERY_STRING} [L,NC]

    Read the article

  • ViewModel with SelectList binding in ASP.NET MVC2

    - by Junto
    I am trying to implement an Edit ViewModel for my Linq2SQL entity called Product. It has a foreign key linked to a list of brands. Currently I am populating the brand list via ViewData and using DropDownListFor, thus: <div class="editor-field"> <%= Html.DropDownListFor(model => model.BrandId, (SelectList)ViewData["Brands"])%> <%= Html.ValidationMessageFor(model => model.BrandId) %> </div> Now I want to refactor the view to use a strongly typed ViewModel and Html.EditorForModel(): <% using (Html.BeginForm()) {%> <%= Html.ValidationSummary(true) %> <fieldset> <legend>Fields</legend> <%=Html.EditorForModel() %> <p> <input type="submit" value="Save" /> </p> </fieldset> <% } %> In my Edit ViewModel, I have the following: public class EditProductViewModel { [HiddenInput] public int ProductId { get; set; } [Required()] [StringLength(200)] public string Name { get; set; } [Required()] [DataType(DataType.Html)] public string Description { get; set; } public IEnumerable<SelectListItem> Brands { get; set; } public int BrandId { get; set; } public EditProductViewModel(Product product, IEnumerable<SelectListItem> brands) { this.ProductId = product.ProductId; this.Name = product.Name; this.Description = product.Description; this.Brands = brands; this.BrandId = product.BrandId; } } The controller is setup like so: public ActionResult Edit(int id) { BrandRepository br = new BrandRepository(); Product p = _ProductRepository.Get(id); IEnumerable<SelectListItem> brands = br.GetAll().ToList().ToSelectListItems(p.BrandId); EditProductViewModel model = new EditProductViewModel(p, brands); return View("Edit", model); } The ProductId, Name and Description display correctly in the generated view, but the select list does not. The brand list definitely contains data. If I do the following in my view, the SelectList is visible: <% using (Html.BeginForm()) {%> <%= Html.ValidationSummary(true) %> <fieldset> <legend>Fields</legend> <%=Html.EditorForModel() %> <div class="editor-label"> <%= Html.LabelFor(model => model.BrandId) %> </div> <div class="editor-field"> <%= Html.DropDownListFor(model => model.BrandId, Model.Brands)%> <%= Html.ValidationMessageFor(model => model.BrandId) %> </div> <p> <input type="submit" value="Save" /> </p> </fieldset> <% } %> What am I doing wrong? Does EditorForModel() not generically support the SelectList? Am I missing some kind of DataAnnotation? I can't seem to find any examples of SelectList usage in ViewModels that help. I'm truly stumped. This answer seems to be close, but hasn't helped.

    Read the article

  • Cart coding help

    - by user228390
    I've made a simple Javascript code for a shopping basket but now I have realised that I have made a error with making it and don't know how to fix it. What I have is Javascript file but I have also included the images source and the addtocart button as well, but What I am trying to do now is make 2 files one a .HTML file and another .JS file, but I can't get it to because when I make a button in the HTML file to call the function from the .JS file it won't work at all. <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> <HTML> <HEAD><TITLE>shopping</TITLE> <META http-equiv=Content-Type content="text/html; charset=UTF-8"> <STYLE type=text/CSS> fieldset{width:300px} legend{font-size:24px;font-family:comic sans ms;color:#004455} </STYLE> <META content="MSHTML 6.00.2900.2963" name=GENERATOR></HEAD> <BODY scroll="auto"> <div id="products"></div><hr> <div id="inCart"></div> <SCRIPT type="text/javascript"> var items=['Xbox~149.99','StuffedGizmo~19.98','GadgetyGoop~9.97']; var M='?'; var product=[]; var price=[]; var stuff=''; function wpf(product,price){var pf='<form><FIELDSET><LEGEND>'+product+'</LEGEND>'; pf+='<img src="../images/'+product+'.jpg" alt="'+product+'" ><p>price '+M+''+price+'</p> <b>Qty</b><SELECT>'; for(i=0;i<6;i++){pf+='<option value="'+i+'">'+i+'</option>'} pf+='</SELECT>'; pf+='<input type="button" value="Add to cart" onclick="cart()" /></FIELDSET></form>'; return pf } for(j=0;j<items.length;j++){ product[j]=items[j].substring(0,items[j].indexOf('~')); price[j]=items[j].substring(items[j].indexOf('~')+1,items[j].length); stuff+=''+wpf(product[j],price[j])+''; } document.getElementById('products').innerHTML=stuff; function cart(){ var order=[]; var tot=0 for(o=0,k=0;o<document.forms.length;o++){ if(document.forms[o].elements[1].value!=0){ qnty=document.forms[o].elements[1].value; order[k]=''+product[o]+'_'+qnty+'*'+price[o]+''; tot+=qnty*price[o];k++ } } document.getElementById('inCart').innerHTML=order.join('<br>')+'<h3>Total '+tot+'</h3>'; } </SCRIPT> <input type="button" value="Add to cart" onclick="cart()" /></FIELDSET></form> </BODY></HTML>

    Read the article

  • NHibernate: How is identity Id updated when saving a transient instance?

    - by bretddog
    If I use session-per-transaction and call: session.SaveOrUpdate(entity) corrected: session.SaveOrUpdateCopy(entity) ..and entity is a transient instance with identity-Id=0. Shall the above line automatically update the Id of the entity, and make the instance persistent? Or should it do so on transaction.Commit? Or do I have to somehow code that explicitly? Obviously the Id of the database row (new, since transient) is autogenerated and saved as some number, but I'm talking about the actual parameter instance here. Which is the business logic instance. EDIT Mappings: public class StoreMap : ClassMap<Store> { public StoreMap() { Id(x => x.Id).GeneratedBy.Identity(); Map(x => x.Name); HasMany(x => x.Staff) // 1:m .Cascade.All(); HasManyToMany(x => x.Products) // m:m .Cascade.All() .Table("StoreProduct"); } } public class EmployeeMap : ClassMap<Employee> { public EmployeeMap() { Id(x => x.Id).GeneratedBy.Identity(); Map(x => x.FirstName); Map(x => x.LastName); References(x => x.Store); // m:1 } } public class ProductMap : ClassMap<Product> { public ProductMap() { Id(x => x.Id).GeneratedBy.Identity(); Map(x => x.Name).Length(20); Map(x => x.Price).CustomSqlType("decimal").Precision(9).Scale(2); HasManyToMany(x => x.StoresStockedIn) .Cascade.All() .Inverse() .Table("StoreProduct"); } } EDIT2 Class definitions: public class Store { public int Id { get; private set; } public string Name { get; set; } public IList<Product> Products { get; set; } public IList<Employee> Staff { get; set; } public Store() { Products = new List<Product>(); Staff = new List<Employee>(); } // AddProduct & AddEmployee is required. "NH needs you to set both sides before // it will save correctly" public void AddProduct(Product product) { product.StoresStockedIn.Add(this); Products.Add(product); } public void AddEmployee(Employee employee) { employee.Store = this; Staff.Add(employee); } } public class Employee { public int Id { get; private set; } public string FirstName { get; set; } public string LastName { get; set; } public Store Store { get; set; } } public class Product { public int Id { get; private set; } public string Name { get; set; } public decimal Price { get; set; } public IList<Store> StoresStockedIn { get; private set; } }

    Read the article

  • Collaborate 2010: Spotlight on Oracle Content Management

    - by [email protected]
    Excitement is building for the Collaborate conference April 18th through the 22nd. Outside of the event being in Las Vegas, which for me often seems to add to the excitement, there will be a great lineup of Oracle Content Management focused sessions. In fact, there are currently over 30 content management sessions scheduled, and attendees will get to hear from customers, partners, as well as Oracle experts. Attendees should expect to hear a lot about Oracle Content Management 11g at Collaborate 2010. Roel Stalman and Andy MacMillan will kick off these discussions on Monday, April 19th as they present Oracle Content Management's product strategy and roadmap (10:45 - 11:45). Monday's lineup also includes sessions on Oracle Imaging and Process Management (I/PM) 11g and Oracle Forms Recognition (2:30 - 3:30), which were both released in January. For those customers using older versions of I/PM or Stellent IBPM, be sure not to miss the "migrating to I/PM 11g" session on Monday as well (1:15 - 2:15) as this should give you some insight into the migration process. Check out the entire list of Oracle Content Management sessions here. Another focus at Collaborate this year is to discuss the benefits of using Oracle Content Management with Oracle Applications - Oracle E-Business Suite, PeopleSoft, and Siebel - so be sure to check out these sessions too: Accelerating Accounts Payable Processes with Integrated Document Imaging(Monday, April 19th, 3:45 - 4:45)Supercharge Your Siebel Sales and Marketing with Integrated Document Management(Tuesday, April 20th, 2:00 - 3:00)Oracle Enterprise 2.0 for Oracle Applications: The Value of an Integrated E2.0 Platform(Tuesday, April 20th, 3:15 - 4:15)Comprehensive Human Resources Automation with Oracle Content Management(Wednesday, April 21st, 1:00 - 2:00) Collaborate is also the perfect opportunity to meet Oracle executives and product experts. Attendees can sign up for 1 on 1 meetings at the event, and there will be someone representing each Oracle Content Management product. These meetings are probably the best way to get your product questions answered in a face-to-face manner. It seems more and more to me that Oracle Content Management customers are viewing Collaborate as "the" conference to attend each year. I hope you have plans to attend and I will see you there.

    Read the article

  • Practical mysql schema advice for eCommerce store - Products & Attributes

    - by Gravy
    I am currently planning my first eCommerce application (mySQL & Laravel Framework). I have various products, which all have different attributes. Describing products very simply, Some will have a manufacturer, some will not, some will have a diameter, others will have a width, height, depth and others will have a volume. Option 1: Create a master products table, and separate tables for specific product types (polymorphic relations). That way, I will not have any unnecessary null fields in the products table. Option 2: Create a products table, with all possible fields despite the fact that there will be a lot of null rows Option 3: Normalise so that each attribute type has it's own table. Option 4: Create an attributes table, as well as an attribute_values table with the value being varchar regardless of the actual data-type. The products table would have a many:many relationship with the attributes table. Option 5: Common attributes to all or most products put in the products table, and specific attributes to a particular category of product attached to the categories table. My thoughts are that I would like to be able to allow easy product filtering by these attributes and sorting. I would also want the frontend to be fast, less concern over the performance of the inserting and updating of product records. Im a bit overwhelmed with the vast implementation options, and cannot find a suitable answer in terms of the best method of approach. Could somebody point me in the right direction? In an ideal world, I would like to offer the following kind of functionality - http://www.glassesdirect.co.uk/products/ to my eCommerce store. As can be seen, in the sidebar, you can select an attribute the glasses to filter them. e.g. male / female or plastic / metal / titanium etc... Alternatively, should I just dump the mySql relational database idea and learn mongodb?

    Read the article

  • Thinking of Adopting the PRINCE2™ Project Management Methodology? Consider Using PeopleSoft Projects to Help

    - by Megan Boundey
    Ever wondered what the PRINCE2™ project management methodology is? Ever wondered if you could use PeopleSoft Projects (ESA) to manage your projects using PRINCE2™?  Published by the Office of Government Commerce in the UK, PRINCE2™ is a scalable, business case and product description-driven Project Management methodology based upon managing by exception. Project activities are organized around fulfilling and meeting the product description. Quality assurance, configuration control and risk management are all based upon ensuring that the product delivered accurately meets the product description. PRINCE2™ is built upon seven principles and seven themes, each underpinning the PRINCE2™project management processes. Important for today’s business environment, the focus throughout PRINCE2™ is on the Business Case, which describes the rationale and business justification for a project. The Business Case drives all the project management processes from initial project setup to successful finish. PRINCE2™, as a method and a certification, is adopted in many countries worldwide, including the UK, Western Europe and Australia. We’ve just released a new white paper, which provides you with an overview of the principles, themes and project management processes associated with PRINCE2™. It also shows how these map to the functionality available within PeopleSoft Projects (ESA). In the time it takes to drink a coffee, you can learn about PRINCE2™ and determine whether it might help you deliver better project results. We encourage you to take a look.

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >