Search Results

Search found 9015 results on 361 pages for 'wireless range'.

Page 71/361 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

  • Where to get the network NIC's firmware rtl_nic/rtl8105e-1.fw?

    - by Kyrol
    Im installing Debian testing version wheezy on my Asus X53Sc with Intel Centrino Wireless-N 100. Im having a problem with my wifi connection. When I try to connect to internet with the wireless connection, an error occurs: Possible missing firmware /lib/firmware/rtl_nic/rtl8105e-1.fw for module r8169. I installed successfully the iwlwifi-100-5.ucode, but now I have this error. Any ideas or suggestions to resolve the problem ?

    Read the article

  • Some web pages won't download fully

    - by Sumac
    Some web pages won't download fully under any browser on any computer connected to the network. I have Internet access through a wireless modem/router (2 Mbps DSL connection, wireless reception is excellent). I use Opera and when I turn on Opera turbo the same sites download fully. I tried changing to some other dns (opendns, google dns), but it made no difference. What would you suggest I try? OS : Windows 7 64 bit

    Read the article

  • Atheros ar5005g

    - by georgesbou
    I have a wireless atheros ar5005g card in my Acer aspire 5040 laptop.My problem is "cannot find network".All other wireless laptops see my network . I have win7 installed with the latest drivers.Any help will be appreciated Thank you

    Read the article

  • Excel Macro Runtime error 428 in Excel 2003

    - by Adam
    Hi I have created a xlt excel template which works fine in Excel 2007 under compatibility mode and shows no errors on compatibility check. The template runs a number of Macros which creates pivot tables and charts. When a colleague tries to run the same xlt on excel 2003 they get a Runtime error 428 (Object does not support this property or method). The runtime error fails at this point; ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R7C1", TableName:="PivotTable2", _ DefaultVersion:=xlPivotTableVersion10 Any help would be appreciated. This is the full Macro; Sub Auto_Open() ' ' ImportData Macro ' Macro to import data, Data must be in your local D: Drive and named raw.csv ' ' Sheets("raw").Select With ActiveSheet.QueryTables.Add(Connection:= _ "TEXT;d:\raw.csv", Destination:=Range _ ("$A$1")) .Name = "raw_1" .FieldNames = True .RowNumbers = False .FillAdjacentFormulas = False .PreserveFormatting = True .RefreshOnFileOpen = False .RefreshStyle = xlInsertDeleteCells .SavePassword = False .SaveData = True .AdjustColumnWidth = True .RefreshPeriod = 0 .TextFilePromptOnRefresh = False .TextFilePlatform = 850 .TextFileStartRow = 1 .TextFileParseType = xlDelimited .TextFileTextQualifier = xlTextQualifierDoubleQuote .TextFileConsecutiveDelimiter = False .TextFileTabDelimiter = False .TextFileSemicolonDelimiter = False .TextFileCommaDelimiter = True .TextFileSpaceDelimiter = False .TextFileColumnDataTypes = Array(1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, _ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) .TextFileTrailingMinusNumbers = True .Refresh BackgroundQuery:=False End With ' ' AddMonthColumn Macro ' ' Sheets("raw").Select Range("AK1").Select ActiveCell.FormulaR1C1 = "Month" Range("AK2").FormulaR1C1 = "=DATE(YEAR(RC[-36]),MONTH(RC[-36]),1)" LastRow = ActiveSheet.UsedRange.Rows.Count Range("AK2").AutoFill Destination:=Range("AK2:AK" & LastRow) Columns("AK:AK").EntireColumn.AutoFit Columns("AK:AK").Select Selection.NumberFormat = "mmmm" With Selection .HorizontalAlignment = xlCenter End With Columns("AK:AK").EntireColumn.AutoFit Selection.Copy Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False ' ' Add Report Information [Text] ' Sheets("Frontpage").Select Range("A2:N2").Select Selection.Merge ActiveCell.FormulaR1C1 = "Service Activity Report" With Selection.Font .Size = 20 End With Range("A3:N3").Select Selection.Merge ActiveCell.FormulaR1C1 = InputBox("Customer Name") With Selection .HorizontalAlignment = xlCenter .VerticalAlignment = xlCenter End With Range("A4:N4").Select Selection.Merge ActiveCell.FormulaR1C1 = InputBox("Date Range dd/mm/yyyy - dd/mm/yyyy") With Selection .HorizontalAlignment = xlCenter .VerticalAlignment = xlCenter End With ' ' IncidentsbyPriority Macro ' ' Sheets("Frontpage").Select Range("A7").Select ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R7C1", TableName:="PivotTable2", _ DefaultVersion:=xlPivotTableVersion10 Sheets("Frontpage").Select Cells(7, 1).Select ActiveSheet.Shapes.AddChart.Select ActiveChart.SetSourceData Source:=Range("Frontpage!$A$7:$H$22") ActiveChart.ChartType = xlColumnClustered With ActiveSheet.PivotTables("PivotTable2").PivotFields("Priority") .Orientation = xlRowField .Position = 1 End With ActiveSheet.PivotTables("PivotTable2").AddDataField ActiveSheet.PivotTables( _ "PivotTable2").PivotFields("Case ID"), "Count of Case ID", xlCount ActiveChart.Parent.Name = "IncidentsbyPriority" ActiveChart.ChartTitle.Text = "Incidents by Priority" Dim RngToCover As Range Dim ChtOb As ChartObject Set RngToCover = ActiveSheet.Range("D7:L16") Set ChtOb = ActiveSheet.ChartObjects("IncidentsbyPriority") ChtOb.Height = RngToCover.Height ' resize ChtOb.Width = RngToCover.Width ' resize ChtOb.Top = RngToCover.Top ' reposition ChtOb.Left = RngToCover.Left ' reposition ' ' IncidentbyMonth Macro ' ' Sheets("Frontpage").Select ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R18C1", TableName:="PivotTable4", _ DefaultVersion:=xlPivotTableVersion10 Sheets("Frontpage").Select Cells(18, 1).Select ActiveSheet.Shapes.AddChart.Select ActiveChart.SetSourceData Source:=Range("Frontpage!$A$18:$H$38") ActiveChart.ChartType = xlColumnClustered With ActiveSheet.PivotTables("PivotTable4").PivotFields("Month") .Orientation = xlRowField .Position = 1 End With ActiveSheet.PivotTables("PivotTable4").AddDataField ActiveSheet.PivotTables( _ "PivotTable4").PivotFields("Case ID"), "Count of Case ID", xlCount ActiveChart.Parent.Name = "IncidentbyMonth" ActiveChart.ChartTitle.Text = "Incidents by Month" Dim RngToCover2 As Range Dim ChtOb2 As ChartObject Set RngToCover2 = ActiveSheet.Range("D18:L30") Set ChtOb2 = ActiveSheet.ChartObjects("IncidentbyMonth") ChtOb2.Height = RngToCover2.Height ' resize ChtOb2.Width = RngToCover2.Width ' resize ChtOb2.Top = RngToCover2.Top ' reposition ChtOb2.Left = RngToCover2.Left ' reposition ' ' IncidentbyCategory Macro ' ' Sheets("Frontpage").Select ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R38C1", TableName:="PivotTable6", _ DefaultVersion:=xlPivotTableVersion10 Sheets("Frontpage").Select Cells(38, 1).Select ActiveSheet.Shapes.AddChart.Select ActiveChart.SetSourceData Source:=Range("Frontpage!$A$38:$H$119") ActiveChart.ChartType = xlColumnClustered With ActiveSheet.PivotTables("PivotTable6").PivotFields("Category 2") .Orientation = xlRowField .Position = 1 End With With ActiveSheet.PivotTables("PivotTable6").PivotFields("Category 3") .Orientation = xlPageField .Position = 1 End With ActiveSheet.PivotTables("PivotTable6").AddDataField ActiveSheet.PivotTables( _ "PivotTable6").PivotFields("Case ID"), "Count of Case ID", xlCount ActiveChart.Parent.Name = "IncidentbyCategory" ActiveChart.ChartTitle.Text = "Incidents by Category" Dim RngToCover3 As Range Dim ChtOb3 As ChartObject Set RngToCover3 = ActiveSheet.Range("D38:L56") Set ChtOb3 = ActiveSheet.ChartObjects("IncidentbyCategory") ChtOb3.Height = RngToCover3.Height ' resize ChtOb3.Width = RngToCover3.Width ' resize ChtOb3.Top = RngToCover3.Top ' reposition ChtOb3.Left = RngToCover3.Left ' reposition ' ' IncidentsbySiteandPriority Macro ' ' Sheets("Frontpage").Select Range("A71").Select ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R71C1", TableName:="PivotTable3", _ DefaultVersion:=xlPivotTableVersion10 Sheets("Frontpage").Select Cells(71, 1).Select ActiveSheet.Shapes.AddChart.Select ActiveChart.SetSourceData Source:=Range("Frontpage!$A$71:$H$90") ActiveChart.ChartType = xlColumnClustered With ActiveSheet.PivotTables("PivotTable3").PivotFields("Site Name") .Orientation = xlRowField .Position = 1 End With With ActiveSheet.PivotTables("PivotTable3").PivotFields("Priority") .Orientation = xlColumnField .Position = 1 End With ActiveSheet.PivotTables("PivotTable3").AddDataField ActiveSheet.PivotTables( _ "PivotTable3").PivotFields("Case ID"), "Count of Case ID", xlCount ActiveChart.Parent.Name = "IncidentbySiteandPriority" ' ActiveChart.ChartTitle.Text = "Incidents by Site and Priority" Dim RngToCover4 As Range Dim ChtOb4 As ChartObject Set RngToCover4 = ActiveSheet.Range("H71:O91") Set ChtOb4 = ActiveSheet.ChartObjects("IncidentbySiteandPriority") ChtOb4.Height = RngToCover4.Height ' resize ChtOb4.Width = RngToCover4.Width ' resize ChtOb4.Top = RngToCover4.Top ' reposition ChtOb4.Left = RngToCover4.Left ' reposition Columns("A:G").Select Range("A52").Activate Columns("A:G").EntireColumn.AutoFit End Sub

    Read the article

  • Detecting Units on a Grid

    - by hammythepig
    I am making a little turn based strategy game in pygame, that uses a grid system as the main map to hold all the characters and the map layout. (Similar to Fire Emblem, or Advance Wars) I am trying to determine a way to quickly and efficiently (i.e. without too much of a slow down) check if there are any characters within a given range of the currently selected character. So to illustrate: O = currently selected character X = squares within range Range of 1: X X O X X Range of 2: X X X X X X O X X X X X X Range of 3: X X X X X X X X X X X X O X X X X X X X X X X X X Now I have to tell the user who is in range, and I have to let the user choose who to attack if there are multiple enemies in range. If I have a 5x5 grid, filled with " " for empty and numbers for the characters: [ ][ ][ ][ ][4] [ ][1][ ][ ][ ] [ ][ ][ ][ ][ ] [ ][ ][2][3][ ] [ ][ ][ ][ ][ ] Depending on which character the user selects, I would like to show the user which other characters are in range. So if they all had a range of 3: 1 can hit 2 2 can hit 1 or 3 3 can hit 2 4 cannot hit anyone. So, How do I quickly and/or efficiently run though my grid and tell the user where the enemies are? PS- As a bonus, if someone could give an answer that could also work for a minimum distance type range, I would give them a pat on the back and a high five, should they ever travel to Canada and we ever meet in life. For example: Range of 3 to 5: (- is out of range) X X X X X X X X X X X X - X X X X X X - - - X X X X X X - - O - - X X X X X X - - - X X X X X X - X X X X X X X X X X X X

    Read the article

  • Subscript out of range error in VBScript script

    - by user3912
    I'm trying to move my entire User folder in Windows Vista to a non-system partition. To do so with a minimum hassle I'm following the directions provided at Ben's Blog, specifically the VBScript he provides. However executing the script throws up an error which I can't resolve myself. Here's the VBScript code followed by the text file it works from, and finally my error message. How do I correct the problem? VBScript Code: '# Perform dir /a c:\users > c:\dir.txt '# place this script file in c:\ too '# double click to run it '# run resulting script.bat from recovery mode repprefix = " Directory of..." ' Modify to your language sourcedrive = "C:\" targetdrive = "D:\" altsourcedrive = "C:\" 'leave same as target drive unless otherwise indicated alttargetdrive = "E:\" 'leave same as target drive unless otherwise indicated inname = "dir.txt" outname = "script.bat" userroot = "Users" set fso = CreateObject("Scripting.FileSystemObject") ' construct batch commands for saving rights, then link, the recreating rights Function GetCommand(curroot, line, typ, keyword) ' first need to get source and target pos = Instr(line, keyword) + Len(keyword) tuple = Trim(Mid(line, pos)) arr = Split(tuple, "[") oldtarget = Replace(arr(1), "]", "") oldlink = curroot & "\" & Trim(arr(0)) ' need to determine if we are pointing back to old disk newlink = replace(oldlink, sourcedrive, targetdrive) if(Instr(oldtarget, sourcedrive & userroot)) then newtarget = Replace(oldtarget, sourcedrive, targetdrive) else newtarget = oldtarget ' still pointing to original target end if ' comment out = "echo " & newlink & " --- " & newtarget & vbCrLf ' save permissions out = out & "icacls """ & replace(oldlink, sourcedrive, altsourcedrive) & """ /L /save " & altsourcedrive & "permissions.txt" & vbCrLf ' create link newlink = replace(newlink, targetdrive, alttargetdrive) if typ = "junction" then out = out & "mklink /j """ & newlink & """ """ & newtarget & """" & vbCrLf else ' typ = "symlink" out = out & "mklink /d """ & newlink & """ """ & newtarget & """" & vbCrLf end if 'set hidden attribute out = out & "attrib +h """ & newlink & """ /L" & vbCrLf ' apply permissions shortlink = Left(newlink, InstrRev(newlink, "\") - 1) 'icacls works strangely - non-orthogonal for restore out = out & "icacls """ & shortlink & """ /L /restore " & altsourcedrive & "permissions.txt" & vbCrLf GetCommand = out & vbCrLf End Function Sub WriteToFile(file, text) ForWriting = 2 Create = true set outfile = fso.OpenTextFile(file, ForWriting, Create) Call outfile.Write(text) Call outfile.Close() End Sub outtext = "ROBOCOPY " & altsourcedrive & userroot & " " & alttargetdrive & userroot & " /E /COPYALL /XJ" & vbCrLf & vbCrLf set intext = fso.OpenTextFile(inname) while not intext.AtEndOfStream line = intext.ReadLine() if Instr(line, repprefix) then curroot = Replace(line, repprefix, "") elseif Instr(line, juncname) then outtext = outtext & GetCommand(curroot, line, "junction", juncname) elseif Instr(line, linkname) then outtext = outtext & GetCommand(curroot, line, "symlink", linkname) end if Wend outtext = outtext & "icacls " & altsourcedrive & userroot & " /L /save " & altsourcedrive & "permissions.txt" & vbCrLf outtext = outtext & "ren " & altsourcedrive & userroot & " _" & userroot & vbCrLf outtext = outtext & "mklink /j " & altsourcedrive & userroot & " " & targetdrive & userroot & vbCrLf outtext = outtext & "icacls " & altsourcedrive & " /L /restore " & altsourcedrive & "permissions.txt" Call intext.Close() Call WriteToFile(outname, outtext) MsgBox("Done writing to " & outname) dir.txt: Volume in drive C is ACER Volume Serial Number is 08D7-C0CC Directory of c:\users 07/16/2009 12:29 PM {DIR} . 07/16/2009 12:29 PM {DIR} .. 11/02/2006 09:02 AM {SYMLINKD} All Users [C:\ProgramData] 11/02/2006 09:02 AM {DIR} Default 11/02/2006 09:02 AM {JUNCTION} Default User [C:\Users\Default] 08/21/2008 08:37 AM 174 desktop.ini 11/02/2006 08:50 AM {DIR} Public 07/19/2009 08:54 PM {DIR} Steve 1 File(s) 174 bytes 7 Dir(s) 5,679,947,776 bytes free Error Message: Windows Script Host Script: C:\user location.vbs Line: 25 Char: 2 Error: Subscript out of range: '[number: 1]' Code: 800A0009 Source: Microsoft VBScript runtime error (In the VBScript script that I'm using on my system, I believe that 'Line 25' corresponds to the line beginning with oldtarget = Replace(arr(1), "]", "").

    Read the article

  • Subscript out of range error in VBScript script

    - by SteveW
    I'm trying to move my entire User folder in Windows Vista to a non-system partition. To do so with a minimum hassle I'm following the directions provided at Ben's Blog, specifically the VBScript he provides. However executing the script throws up an error which I can't resolve myself. Here's the VBScript code followed by the text file it works from, and finally my error message. How do I correct the problem? VBScript Code: '# Perform dir /a c:\users > c:\dir.txt '# place this script file in c:\ too '# double click to run it '# run resulting script.bat from recovery mode repprefix = " Directory of..." ' Modify to your language sourcedrive = "C:\" targetdrive = "D:\" altsourcedrive = "C:\" 'leave same as target drive unless otherwise indicated alttargetdrive = "E:\" 'leave same as target drive unless otherwise indicated inname = "dir.txt" outname = "script.bat" userroot = "Users" set fso = CreateObject("Scripting.FileSystemObject") ' construct batch commands for saving rights, then link, the recreating rights Function GetCommand(curroot, line, typ, keyword) ' first need to get source and target pos = Instr(line, keyword) + Len(keyword) tuple = Trim(Mid(line, pos)) arr = Split(tuple, "[") oldtarget = Replace(arr(1), "]", "") oldlink = curroot & "\" & Trim(arr(0)) ' need to determine if we are pointing back to old disk newlink = replace(oldlink, sourcedrive, targetdrive) if(Instr(oldtarget, sourcedrive & userroot)) then newtarget = Replace(oldtarget, sourcedrive, targetdrive) else newtarget = oldtarget ' still pointing to original target end if ' comment out = "echo " & newlink & " --- " & newtarget & vbCrLf ' save permissions out = out & "icacls """ & replace(oldlink, sourcedrive, altsourcedrive) & """ /L /save " & altsourcedrive & "permissions.txt" & vbCrLf ' create link newlink = replace(newlink, targetdrive, alttargetdrive) if typ = "junction" then out = out & "mklink /j """ & newlink & """ """ & newtarget & """" & vbCrLf else ' typ = "symlink" out = out & "mklink /d """ & newlink & """ """ & newtarget & """" & vbCrLf end if 'set hidden attribute out = out & "attrib +h """ & newlink & """ /L" & vbCrLf ' apply permissions shortlink = Left(newlink, InstrRev(newlink, "\") - 1) 'icacls works strangely - non-orthogonal for restore out = out & "icacls """ & shortlink & """ /L /restore " & altsourcedrive & "permissions.txt" & vbCrLf GetCommand = out & vbCrLf End Function Sub WriteToFile(file, text) ForWriting = 2 Create = true set outfile = fso.OpenTextFile(file, ForWriting, Create) Call outfile.Write(text) Call outfile.Close() End Sub outtext = "ROBOCOPY " & altsourcedrive & userroot & " " & alttargetdrive & userroot & " /E /COPYALL /XJ" & vbCrLf & vbCrLf set intext = fso.OpenTextFile(inname) while not intext.AtEndOfStream line = intext.ReadLine() if Instr(line, repprefix) then curroot = Replace(line, repprefix, "") elseif Instr(line, juncname) then outtext = outtext & GetCommand(curroot, line, "junction", juncname) elseif Instr(line, linkname) then outtext = outtext & GetCommand(curroot, line, "symlink", linkname) end if Wend outtext = outtext & "icacls " & altsourcedrive & userroot & " /L /save " & altsourcedrive & "permissions.txt" & vbCrLf outtext = outtext & "ren " & altsourcedrive & userroot & " _" & userroot & vbCrLf outtext = outtext & "mklink /j " & altsourcedrive & userroot & " " & targetdrive & userroot & vbCrLf outtext = outtext & "icacls " & altsourcedrive & " /L /restore " & altsourcedrive & "permissions.txt" Call intext.Close() Call WriteToFile(outname, outtext) MsgBox("Done writing to " & outname) dir.txt: Volume in drive C is ACER Volume Serial Number is 08D7-C0CC Directory of c:\users 07/16/2009 12:29 PM {DIR} . 07/16/2009 12:29 PM {DIR} .. 11/02/2006 09:02 AM {SYMLINKD} All Users [C:\ProgramData] 11/02/2006 09:02 AM {DIR} Default 11/02/2006 09:02 AM {JUNCTION} Default User [C:\Users\Default] 08/21/2008 08:37 AM 174 desktop.ini 11/02/2006 08:50 AM {DIR} Public 07/19/2009 08:54 PM {DIR} Steve 1 File(s) 174 bytes 7 Dir(s) 5,679,947,776 bytes free Error Message: Windows Script Host Script: C:\user location.vbs Line: 25 Char: 2 Error: Subscript out of range: '[number: 1]' Code: 800A0009 Source: Microsoft VBScript runtime error (In the VBScript script that I'm using on my system, I believe that 'Line 25' corresponds to the line beginning with oldtarget = Replace(arr(1), "]", "").

    Read the article

  • Speed Problem with Wireless Connectivity on Cisco 877w

    - by Carl Crawley
    Having a bit of a weird one with my local LAN setup. I recently installed a Cisco 877W router on my DSL2+ connection and all is working really well.. Upgraded the IOS to 12.4 and my wired clients are streaming connectivity superfast at 1.3mb/s. However, there seems to be an issue with my wireless clients - I can't seem to stream any data across the local wireless connection (LAN) and using the Internet, whilst responsive enough isn't really comparable with the wired connection speed. For example, all devices are connected to an 8 Port Gb switch on FE0 from the Router with a NAS disk and on my wired clients, I can transfer/stream etc absolutely fine - however, transferring a local 700Mb file on my local LAN estimates 7-8 hours to transfer :( The Wireless config is as follows : interface Dot11Radio0 description WIRELESS INTERFACE no ip address ! encryption mode ciphers tkip ! ssid [MySSID] ! speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 channel 2462 station-role root rts threshold 2312 world-mode dot11d country GB indoor bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 spanning-disabled bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding All devices are connected to the Gb Switch which is connected to FE0 with the following: Hardware is Fast Ethernet, address is 0021.a03e.6519 (bia 0021.a03e.6519) Description: Uplink to Switch MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output never, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 14000 bits/sec, 19 packets/sec 5 minute output rate 167000 bits/sec, 23 packets/sec 177365 packets input, 52089562 bytes, 0 no buffer Received 919 broadcasts, 0 runts, 0 giants, 0 throttles 260 input errors, 260 CRC, 0 frame, 0 overrun, 0 ignored 0 input packets with dribble condition detected 156673 packets output, 106218222 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out Not sure why I'm having problems on the wireless and I've reached the end of my Cisco knowledge... Thanks for any pointers! Carl

    Read the article

  • Excel 2007: Named ranges problems when linking workbooks

    - by Mike
    I've 30+ workbooks each with 5 specific worksheets (formated the same). Each worksheet's data needs to be linked to a master workbook, so that I end up with 5 master workbooks and all the specific data in one long table format $A$2:$I$750. (Are you still with me? ;)) I don't have access to a database, so I'm having to link the sheets to their master workbook directly. I've highlighted the data I need; named the range; and then tried referencing this from my master workbook. I get the #Value error symbol when I try to link (=[WorkbookName]!MyNamedRange) to a cell that doesn't match the top left cell of my range. Example: MyNamedrange is always =$A$2:$I43$ on one specific sheet. On my master workbook it works if it's referenced at A2 but I get #Value if it's referenced A1, or A44. Any ideas? I'm trying to link my data in one continous table so I can run a pivot on it, and other things. Can it be done like this, or should I just copy and paste? I'm trying to keep things 'linked'so I do not need to spend time C&Ping all day. Many thanks Mike.

    Read the article

  • Wireless does not work on Ubuntu 9.04

    - by Yongwei Xing
    Hi all I install the Ubuntu 9.04 my old Lenovo Y520 laptop, the wirless does not work.My Wireless card is Intel Pro/wireless 2100 card. But I can not enable it. My wired card is working well. Does anyone meet it before. the ifconfig output is eth0 Link encap:Ethernet HWaddr 00:0a:e4:5f:6c:30 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:973 errors:0 dropped:0 overruns:0 frame:0 TX packets:1025 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:574701 (574.7 KB) TX bytes:169249 (169.2 KB) Interrupt:10 eth1 Link encap:Ethernet HWaddr 00:0c:f1:58:79:b5 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:10 Base address:0x8000 Memory:d0202000-d0202fff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 B) TX bytes:480 (480.0 B) the output of iwconfig is eth1 unassociated ESSID:off/any Nickname:"ipw2100" Mode:Managed Channel=0 Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:off Retry short limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I have another question. When my OS is 9.04, there is a icon about network connection on the panel at the top. After I upgraded to 9.10, that icon disappeared. How can I get that back? Best Regareds,

    Read the article

  • outlook security alert after adding a second wireless access point to the network

    - by Mark
    Just added a Netgear WG103 Wireless Access Point in our conference room to allow visitors to access the internet through out internal network. When switched on visitors can connect to the intenet and everything works fine. Except, when the Access Point is switched on, normal users of the network get a Security Alert when they try to start Outlook 2007. The Security Alert is the same as the one shown in question 148526 asked by desiny back in June 2010 (http://serverfault.com/questions/148526/outlook-security-alert-following-exchange-2007-upgrade-to-sp2) rather than "autodiscover.ad.unc.edu" my security alert references our "Remote.server.org.uk". If I view the certificate it relates to "Netgear HTTPS:....", but the only Netgear equipment we have is the new Access Point installed in the conference room. If the Access Point is not switched on we do not get the Security Alert. At first I thought it was because we had selected "WPA-PSK & WPA2-PSK" Network Authentication Type but it continues to occur even if we opt for "Shared Key" WEP Data Encryption. I do not understand why adding a Netgear Wireless Access point would cause Outlook to issue a Security Alert when users try to read their email. Does anyone know what I have to do to get rid of the Security Alert? Thanks in advance for reading this and helping me out.

    Read the article

  • unable to access Internet by wireless but can by cable

    - by Jeff King
    i'M GOING MAD! UNtil last friday I had been successfully using wifi with the supplier as VIRGIN through their Motorola SB 4200 cable Modem and the wireless router being the Linksys WRT 54G router. Supported were three lap tops and an EPSON 510W printer and this had been running with no issue for about 3 years. Back to last friday, we started suffering significant delays and then the network collapsed with no wireless access. I was able to connect a single laptop direct to the cable modem and internet access was restored to just that one device. I thought that the problem was the router so I tried a backup D-Link device with no success. I have subsequently bought another cable modem AND a netgear router plus addidtional ethernet cables but with no success. The best that happens is that the signal appears good but I cannot get access to the internet. A yellow question mark appears on the 'gradient' icon. Each laptop and router works elsewhere so I'm stumped. Mind you I am a real novice so I'm not surprised. Please can anyone tell me what I'm doing wrong?

    Read the article

  • wireless clients not getting correct dhcp addresses

    - by szeli
    I apologise first if this is a stupid problem. I'm new to Cisco networking. I need some help with an existing configuration done by my vendor. Environment: 1. Core switch - Catalyst 6509e vlans configured: a. vlan 50 (wired clients) 10.0.50.x/24 interface IP 10.0.50.20 b. vlan 70 (wireless clients) 10.0.70.x/24 interface IP 10.0.70.20 c. vlan 192 (guest clients) 192.168.1.x/24 interface IP 192.168.1.20 d. trunk port for WLC native vlan 70 allowed vlan 50, 70, 192 2. Cisco 4402 WLC interfaces a. management untagged IP 10.0.70.10 b. ap-manager untagged IP 10.0.70.11 c. service-port n/a IP 192.168.10.1 d. virtual n/a IP 1.1.1.1 e. guestwlan vlan192 IP 192.168.1.100 3. Cisco AIR-LAP1142N-S-K9 LAP01 (WLAN local, interface: management) IP 10.0.70.21/24 GW 10.0.70.20 DHCP server 10.0.50.10 (scope 10.0.70.101 to 200) LAP02 (WLAN guest, interface: guestwlan) IP 192.168.1.21/24 GW 192.168.1.20 DHCP server 192.168.1.10 (scope 192.168.1.101 to 200) here's the problem, wireless clients connected to WLAN guest keep getting DHCP leases from WLAN local 10.0.50.10 (scope 10.0.70.101 to 200) can anyone please help? thanks!

    Read the article

  • Nokia 5800 v50, getting "Invalid server name" with ad-hoc wlan with Windows 7

    - by Krunal
    After upgrading to v50 firmware in my Nokia 5800 xpress music phone. I am not able to connect to ad-hoc wlan network in my laptop(Windows 7 OS). I have a dialup internet connection and created wireless ad-hoc network to access the internet in my phone. But I am getting "invalid server name" in the phone and my wireless network access type in Windows 7 shows "no internet access". I am able to connect to wlan infrastructure network using 5800 in my office. So my phone is working with wlan and I m able to access internet on it. BUT The problem is "dial up with ICS enabled" and "AD-HOC wlan network" in Windows 7. Can anyone give some solution on it. Or can you provide a guide/tutorial to connect 5800 with adhoc network and dialup internet in Windows 7. System: Windows 7 Dial up internet connection with ICS enabled. Ad-Hoc wireless network with WEP Nokia 5800 Xpress Music phone Note: I have read other posts also and tried their solutions but didn't worked for me. the first solution is to bridge the network and access it. but how can I bridge the dialup and wlan netwok? second solution is manually configure IP and DNS addresses in phone. But what should I add as IP and DNS as my dial up and adhoc network have automatic addresses.

    Read the article

  • Is encryption really needed for having network security? [closed]

    - by Cawas
    I welcome better key-wording here, both on tags and title. I'm trying to conceive a free, open and secure network environment that would work anywhere, from big enterprises to small home networks of just 1 machine. I think since wireless Access Points are the most, if not only, true weak point of a Local Area Network (let's not consider every other security aspect of having internet) there would be basically two points to consider here: Having an open AP for anyone to use the internet through Leaving the whole LAN also open for guests to be able to easily read (only) files on it, and even a place to drop files on Considering these two aspects, once everything is done properly... What's the most secure option between having that, or having just an encrypted password-protected wifi? Of course "both" would seem "more secure". But it shouldn't actually be anything substantial. I've always had the feeling using any kind of the so called "wireless security" methods is actually a bad design. I'm talking mostly about encrypting and pass-phrasing (which are actually two different concepts), since I won't even consider hiding SSID and mac filtering. I understand it's a natural way of thinking. With cable networking nobody can access the network unless they have access to the physical cable, so you're "secure" in the physical way. In a way, encrypting is for wireless what building walls is for the cables. And giving pass-phrases would be adding a door with a key. So, what do you think?

    Read the article

  • Virtual Wifi Issue Windows 7

    - by Matt
    Lately I've been trying to use my laptop as a wireless router in my room. I have it connected to my school's network through ethernet, and I want to set up wireless so that I can use Wifi on my Android phone and iPod Touch. In the past, I used Connectify, but I started having an issue where my phone would find the network, connect, attempt to get the IP, and then suddenly the network would disappear. Then it'd pop up again, and the same process would happen over and over. I decided that I'd totally uninstall Connectify, but after that, neither Virtual Router Manager nor the command prompt could create a viable network either. My phone and even my iPod now encounter the same problem. Neither can successfully connect. So evidently there is something wrong with the laptop's virtual wifi feature, and I have no idea what that could be. I've tried enabling certain services that virtual wifi supposedly relies on, but some of them don't start, namely Remote Access Connection Manager. But I also have read that these enable on their own and that if they are normally not enabled it's fine. Furthermore, I even uninstalled and reinstalled the drivers for my wireless card. Any ideas as to why my virtual wifi won't function? Anything? I really would love to get this working...

    Read the article

  • Turning on Bluetooth disables wifi on Yoga 2

    - by Yostage
    I have a Lenovo Yoga 2. The moment that I turn on bluetooth, the wifi drops out - I lose connection, and connecting again shows "connection failed". If I turn the bluetooth off, wifi can reestablish fine. I've tried lots of different combinations of drivers for both the wifi and the bluetooth, but no combination has has changed this behavior yet. I've read some speculation that the cards have insufficient shielding, but that seems like kind of a large flaw to ship with. I've tried with a Carbon X1, a Yoga 2 Pro, and a Yoga 2 all next to each other on the desk while running InSSIDer. The X1 and the Y2P don't lose wifi connection when the bluetooth turns on, but the Y2 does immediately. The Y2P and the Y2 are running the same drivers for bluetooth and wifi, and appear to have the same wireless card internally. During the failure state, InSSIDer still sees signal strength for my network, but I cannot connect to it. stats: the card that comes in the laptop is an Intel Wireless-N 7260 Intel Bluetooth driver is at 17.0.1401.422 Intel Wireless driver is at 17.0.2.5 Windows 8.1 x64 Home wifi is a Medialink MWN-WAPR150N

    Read the article

  • Number of routers in small community lock up and require reboot.

    - by Anthony Hiscox
    I live in a small town which has one primary ISP. Lately I have noticed that a number of wireless routers have been locking up and requiring a reboot before allowing any connections. This has affected two of my routers, my work router, and a few others. In all cases wired continued to function as usual. Often wireless clients can see the SSID but simply won't connect. I can only think of a few possibilities and was hoping someone here might be able to point me in the right direction: Our ISP is well known to be flaky, something they are doing is causing this, what that might be I have no clue it as seems to affect the wireless only. There's a power issue in town, given our remote location and reputation for crap electrical, this seems reasonable. Only one router was plugged in to a UPS, and I'm not sure of the quality. There is some bug in all the different firmware for every one of these routers (all different). That doesn't seem reasonable, unless; it's an unknown (or known) exploit or DoS of some sort being launched by a massive team of ninjas hell bent on forcing us all to be tethered to our walls by ethernet cables or; it's just been a coincidence and I'm just paranoid (this has some weight, I mean read 4 again). Anyone else experience similar issues and have some tips?

    Read the article

  • can't get to admin page after factory reset netgear wg602

    - by stefanB
    I have wireless Netgear wg602 on my home network (connected to my internet modem/router). I've had it secured and locked down to only accept connection from specific MAC addresses. I've forgotten the password that I used but my Mac Book laptops can still connect (multiple OS updates - it can't retrieve and display the password but it can use it to log in to WPA) so I want to reconfigure it from scratch (have some new devices). I tried to reset the Netgear wg602 to factory settings (pressed reset button for 10 sec), reset my laptop IP address to local address suggested in manual (192.168.0.210 net mask 255.255.255.0), connect Netgear via ethernet cable to my mac book pro but I can't get to the admin page at 192.168.0.227 as suggested by manual (firefox or safari). At this stage the Netgear is not connected to router, it is only connected to mac book. I can't ping the wireless access point either (but it is on all lights are on). What am I doing incorrectly? Last time I configured it via Windows now I only have Mac Book (which I've used with the wireless access point for 2 years so no compatibility problems).

    Read the article

  • How to monitor bandwidth use of each device on wifi network

    - by GWLlosa
    I have in my home a standard Comcast cable internet connection. I have it going from the wall to a cable modem, and from the modem to a late-series Linksys router, which provides wired and wireless networking. The vast majority of the users are wireless connections. For day-to-day tasks, this connection is fully sufficient for all my needs. However, on regular occassions, we have social gatherings that involve many people bringing laptops and other PCs and using the network and internet simultaneously, frequently for gaming. I have no administrative oversight over these machines; they have been known to be riddled with spyware and/or bloatware or be running torrents, legal or otherwise. The only reason I care is that on a regular basis, one of the machines will flatline my internet bandwith, and consume it all in order to upload/download/spam people/whatever. When this happens, the latency of the connections for gaming and the like becomes unacceptable, and everyone suffers. My question is: Is there a system I can set up whereby I can easily monitor the various systems connected to my wireless connection, see how much bandwith each one is using, and for what ends? That way, at a glance, I can spot the offending machine and kick it from the connection, without having to go from machine to machine, checking each one's "bandwith used" properties manually, and dealing with the owner's indignant protests all the while. I understand this will likely involve 3rd-party software and/or hardware; my issue is I don't even know where to begin.

    Read the article

  • Can Internet data be used by malware when PC off?

    - by Val
    I have noticed over the last month that my off peak data has been used at a rate of approx 350MB per hour - this has meant that I have gone over my quota and slowed down by my ISP to 256k. There is no one in the house using it (2am-8am is my ISPs off peak hours) at that time. My PC and other wireless devices (ipad and iphone) are turned off. I have changed the wireless password on my modem 3 times and it is now 30 digits long. So I don't think someone else is using my wireless access between 2-8am. It has been suggested by my ISP that I may have malware/spyware on my computer. Sorry for my ignorance, but can malware still run if the PC is off? I did look at my modem's log and followed an IP address to a service called Amazon Simple server Storage. Could this company possibly be the culprit? I am not too tech savvy, so any assistance appreciated. I have run a barrage of spyware cleaning software eg malware bytes; spy bot etc.... Cheers Val

    Read the article

  • A router that supports connecting with 2 different wifi networks

    - by Allan Deamon
    I Have the following setup in one place: We have a small local ISP through wireless. I have a external parabolic antenna, connected to a external usb wifi radio, connected through USB to a desktop old PC. The pc connects do the ISP wiki network, then do a Dial Up (PPPoE) connection through the this wifi setup. This will expand with others mobiles devices to be used. When I need, I take my home wireless router and connect though Ethernet in the PC, which is shares the internet. The problem is that the PC must be always ON and working. I would like to buy a wireless router which could be an AP to the mobile devices, notebooks, etc, as also could connect to the ISP Wifi/PPPoE network. So, this device must: Have one radio with detachable antenna to connect to the external antenna. It must connect as client to a network and then dial up the PPP Have another radio serving as AP (infrastructure) to the local place This can't be very expensive. I found a candidate: ( http://www.tp-link.com/en/products/details/?categoryid=1682&model=TL-WR2543ND ) It have 3 deatachable antennas, working with dual band. Officially, his firmware doesn't support it. My supposition: If internally there is 3 or 2 distinct wlan ports (like wlan0, wlan1), and there is support, i could use a OpenWRT, DD-WRT or Tomato to make this works. It also have 1 USB port, which I cold use to connect my actual USB Wifi card on it instead to the old PC. Another alternative, is a router that can do this out of box, with the original firmware. But I don't think this is a easy thing to find.

    Read the article

  • Ubuntu 10.04 network manager issues

    - by Shark
    I was using the default network manager to connect to my wi-fi network, but if the connection is dropped or router restarted the network manager wont reconnect automatically after i guess a couple of tries and just gives a pop-up to connect manually . To avoid this annoyance I installed WICD but though it does try to reconnect to the network after a drop in connection it is unable to resolve the ip address and i am left with an even bigger annoyance . 1. Is there a way to counter either of these issues ? 2. Something like a background process that will check network status periodically and then try to connect to a favored network ? Edit- out put of lshw -C network *-network description: Wireless interface product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:12:00.0 logical name: eth1 version: 01 serial: c0:cb:38:18:9b:7f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.60.48.36 ip=192.168.11.2 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:fbc00000-fbc03fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:13:00.0 logical name: eth0 version: 02 serial: f0:4d:a2:94:2d:74 size: 10MB/s capacity: 100MB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:29 ioport:e000(size=256) memory:d0b10000-d0b10fff(prefetchable) memory:d0b00000-d0b0ffff(prefetchable) memory:fb200000-fb21ffff(prefetchable)

    Read the article

  • How to troubleshoot Linksys E4200 Remote Management

    - by Jordan
    My Linksys E4200 is configured for Remote Management, but the router is not accepting the connections. Here's the configuration under Administration Management Remote Management Access: Remote Management: Enabled Access via: HTTP Remote Upgrade: Disabled Allowed Remote IP Address: Any IP Address Remote Management Port: 8080 The router is setup to use 192.168.10.41 as its static Internet IP address, and 192.168.35.1 as its LAN IP address. I can access the router just fine via its LAN IP address, but I can't make a connection using http://192.168.10.41:8080. I've tried variations of the settings above (enabled HTTPS, enabled Remote Upgrade, set an IP range of 192.168.10.1-254) but nothing has worked yet. Hoping someone can at least point me in the right direction. Thanks. Update: To clarify, I have a wired router that connects straight to the T1 modem. It's configured to use 192.168.10.1-254 as its internal LAN range. The E4200 wireless router in question is on that LAN using 192.168.10.41 as its WAN IP address. The E4200's internal LAN range is 192.168.35.1-254. I'm not trying to access the E4200 from the Internet, I'm just trying to access it from its WAN IP address. Thanks.

    Read the article

  • linux shutdown hang with wifi cifs mounts

    - by Sirex
    Since fedora 15 (and now with 16) it seems that wireless clients take a long while to shutdown when they have network filesystems mounted at shutdown time. I've pushed out a cifs mount via puppet, and all clients have it, including those on wireless. If say a laptop is on a wired connection it shuts down just fine, but if its on the wifi at the time (and no wired connection) it'll hang at the fedora f logo. I'm not sure if its indefinite or just a really long while, but ill give it a test when i shut this machine down in a second. Needless to say its pretty annoying, so is there a way of causing the machine to shutdown even if network connectivity has been lost at unmount time, -- or an official way to reorder events so the wireless card is kept up until after the unmount happens during the shut down process (short of writing a custom script for shutdowns which is a bit of a kludge) ? It does this on multiple machines, and all started doing it when we went from fedora 14 to 15. It was such an obvious issue i'd kind of assumed someone must have reported it or there was an easy fix, but i've not discovered anything yet. Additional info: I can confirm that manually unmounting the mounts then shutting down (sudo shutdown or the xfce shutdown button) will shutdown just fine, it only hangs if the mounts are still mounted The puppet config that sets the mount looks like this (now with the _netdev entry that is indeed pushed to clients successfully, but makes no difference): file { "/mnt/share": ensure = directory,} mount { "/mnt/share": atboot = true, ensure = mounted, remounts = false, fstype = cifs, device = "//srv/share", options = "user,gid=shareusers,uid=${user},file_mode=0700,dir_mode=0700,credentials=/root/.smbcreds,_netdev", require = [ File["/mnt/share"], Group["shareusers"] ], } }

    Read the article

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >