Search Results

Search found 28439 results on 1138 pages for '10'.

Page 72/1138 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

  • Setting my NIC to full duplex

    - by David
    I am trying to optimize the network speed of my Solaris X86 server, and have discovered that the Cisco 3548 that it is connected to has issues with the NIC in my server. The NIC appears to have not been configured fully, and is coming up 100 half-duplex. The 3548 ports are all set to 100 full. Ideally I'd like to have the server set for 100 full, and have been attempting to configure it using ndd commands. However I have had no results. The following command: -bash-3.00# dladm show-dev rtls0 link: unknown speed: 100 Mbps duplex: unknown The NIC shows up as: pci bus 0x0001 cardnum 0x06 function 0x00: vendor 0x10ec device 0x8139 Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ which should be configurable. I have modified the configuration file from auto config (5) to 100 fdx (4) to no avail. If there is no other choice, I could alter the Cisco 3548 to be 100 half-duplex. However, this solution causes huge performance loss. Currently throughput is about 500Kbps, when it should be around 40Mbps.

    Read the article

  • Ubuntu 9.10 server requires frequent reboots to free up memory

    - by bcmcfc
    I'm running Ubuntu 9.10 on my server. It works fine, it's just that over time (usually a couple of days) the memory usage just grows and grows until it invariably runs out and needs to be rebooted. It's running Apache, Samba, ProFTPd, Postfix, Munin & Webmin. Is there anything that can be done to free up the memory that it doesn't need anymore?

    Read the article

  • CodePlex Daily Summary for Wednesday, December 29, 2010

    CodePlex Daily Summary for Wednesday, December 29, 2010Popular ReleasesDocX: DocX v1.0.0.11: Building Examples projectTo build the Examples project, download DocX.dll and add it as a reference to the project. OverviewThis version of DocX contains many bug fixes, it is a serious step towards a stable release. Added1) Unit testing project, 2) Examples project, 3) To many bug fixes to list here, see the source code change list history.Cosmos (C# Open Source Managed Operating System): 71406: This is the second release supporting the full line of Visual Studio 2010 editions. Changes since release 71246 include: Debug info is now stored in a single .cpdb file (which is a Firebird database) Keyboard input works now (using Console.ReadLine) Console colors work (using Console.ForegroundColor and .BackgroundColor)AutoLoL: AutoLoL v1.5.0: Added the all new Masteries Browser which replaces the Quick Open combobox AutoLoL will now attemt to create file associations for mastery (*.lolm) files Each Mastery Build can now contain keywords that the Masteries Browser will use for filtering Changed the way AutoLoL detects if another instance is already running Changed the format of the mastery files to allow more information stored in* Dialogs will now focus the Ok or Cancel button which allows the user to press Return to clo...Confree for Outlook: Confree for Outlook 1.0: Confree for OutlookFeaturesCreate a Claro/Telmex conference directly from Outlook (only works for Argentina). NotesBy now, only works with Claro/Telmex Argentina (if you are using http://simon.telmex.net.ar, we are good).Paint.NET PSD Plugin: 1.6.0: Handling of layer masks has been greatly improved. Improved reliability. Many PSD files that previously loaded in as garbage will now load in correctly. Parallelized loading. PSD files containing layer masks will load in a bit quicker thanks to the removal of the sequential bottleneck. Hidden layers are no longer made visible on save. Many thanks to the users who helped expose the layer masks problem: Rob Horowitz, M_Lyons10. Please keep sending in those bug reports and PSD repro files!Razor Templating Engine: Razor Templating Engine v1.2: Changes: ADDED: Standard namespaces imports for all templates: System, System.Collections.Generic, System.Linq (Changeset 5635) ADDED: Methods for Precompilation (Changeset 3283) CHANGED: Refactored precompilation to be exposed per-TemplateService. (Changeset 3440) CHANGED: Added more descriptive compilation exception message. (Changeset 3629) FIXED: Forced reference to Microsoft.CSharp to correct support for testing frameworks. (Changeset 3689) FIXED: Added support for nested anonymous obj...PhysicalMeasure C# library: PhysicalMeasure 1.0 Release 2010-12-28: PhysicalMeasure 1.0 Release 2010-12-28Facebook C# SDK: 4.1.1: From 4.1.1 Release: Authentication bug fix caused by facebook change (error with redirects in Safari) Authenticator fix, always returning true From 4.1.0 Release Lots of bug fixes Removed Dynamic Runtime Language dependencies from non-dynamic platforms. Samples included in release for ASP.NET, MVC, Silverlight, Windows Phone 7, WPF, WinForms, and one Visual Basic Sample Changed internal serialization to use Json.net BREAKING CHANGE: Canvas Session is no longer supported. Use Signed...MonitorWang: MonitorWang v1.0.5 (Growler): What's new?Added Growl Notification Finalisers - these are interceptor components that work exclusively with the Growl Publisher. These allow you to modify the Growl Notification just prior to it being sent by the publisher. You can inject custom logic to precisely control how the Growl Notification will appear; this includes changing the Growl Priority level and message text. I've created to two Growl Notification Finalisers - one allows you to change the Growl Notification Priorty based on ...Catel - WPF and Silverlight MVVM library: 1.0.0: And there it is, the final release of Catel, and it is no longer a beta version!EnhSim: EnhSim 2.2.7 ALPHA: 2.2.7 ALPHAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Mongoose has bee...LINQ to Twitter: LINQ to Twitter Beta v2.0.19: Mono 2.8, Silverlight, OAuth, 100% Twitter API coverage, streaming, extensibility via Raw Queries, and added documentation. Bug fixes.Rocket Framework (.Net 4.0): Rocket Framework for Windows V 1.0.0: Architecture is reviewed and adjusted in a way so that I can introduce the Web version and WPF version of this framework next. - Rocket.Core is introduced - Controller button functions revisited and updated - DB is renewed to suite the implemented features - Create New button functionality is changed - Add Question Handling featuresFlickr Wallpaper Rotator (for Windows desktop): Wallpaper Flickr 1.1: Some minor bugfixes (mostly covering when network connection is flakey, so I discovered them all while at my parents' house for Christmas).NoSimplerAccounting: NoSimplerAccounting 6.0: -Fixed a bug in expense category report.NHibernate Mapping Generator: NHibernate Mapping Generator 2.0: Added support for Postgres (Thanks to Angelo)NewLife XCode: XCode v6.5.2010.1223 ????(????v3.5??): XCode v6.5.2010.1223 ????,??: NewLife.Core ??? NewLife.Net ??? XControl ??? XTemplate ????,??C#?????? XAgent ???? NewLife.CommonEnitty ??????(???,XCode??????) XCode?? ?????????,??????????????????,?????95% XCode v3.5.2009.0714 ??,?v3.5?v6.0???????????????,?????????。v3.5???????????,??????????????。 XCoder ??XTemplate?????????,????????XCode??? XCoder_Src ???????(????XTemplate????),??????????????????VivoSocial: VivoSocial 7.4.0: Please see changes: http://support.vivoware.com/project/ChangeLog.aspx?PROJID=48Umbraco CMS: Umbraco 4.6 Beta - codename JUNO: The Umbraco 4.6 beta (codename JUNO) release contains many new features focusing on an improved installation experience, a number of robust developer features, and contains more than 89 bug fixes since the 4.5.2 release. Improved installer experience Updated Starter Kits (Simple, Blog, Personal, Business) Beautiful, free, customizable skins included Skinning engine and Skin customization (see Skinning Documentation Kit) Default dashboards on install with hide option Updated Login t...ASP.NET MVC SiteMap provider: MvcSiteMapProvider 2.3.0: Using NuGet?MvcSiteMapProvider is also listed in the NuGet feed. Learn more... Like the project? Consider a donation!Donate via PayPal via PayPal. Release notesThis will be the last release targeting ASP.NET MVC 2 and .NET 3.5. MvcSiteMapProvider 3.0.0 will be targeting ASP.NET MVC 3 and .NET 4 Web.config setting skipAssemblyScanOn has been deprecated in favor of excludeAssembliesForScan and includeAssembliesForScan ISiteMapNodeUrlResolver is now completely responsible for generating th...New Projects42 Sight Holistic Data Warehousing on Microsoft SQL Server 2008: This project is the Holistic DW Template. Included are the 3 MS XL spreadsheet reporting models as described in the book Holistic Data Warehousing. This Template is multi-purpose and requires no modification other than you populating it according to the book examplesAndshev.OrmTools: Tools for generating SQL queries using LINQ. ORM framework is also planned to be implemented.BFG and Dice Roller: This solution will contain 2 concepts, the Dice Roller with hooks for extension into other applications, as well as a Personal Battlefleet Gothic Helper application to help manage, control, and smoothe the flow of BFG games. The BFG application will target the Phone 7 platform.BlondieODOS: its an osBluehat Community projetcts: Bluehat Community projetcts.C# - DBWrapper MySQL: Abro aqui a discussão para criarmos uma classe para manipular dados em MySQL.CardGame for Education: This project goal is to create a small Card Game and to teach the team members how to design, implement and how to use "real world" tools. Englishlearning: My test project!Faran Silver: Silverlight Controls Developed till now. Include: 1- Persian Date Input 2- Close-able Tab Item 3- Shamsi Date Convertergocodelibrary: This is my project.Id3Stuff: Project that throws together some nice id3 mass editing functionsInfoStrat.OakFx: OakFx by InfoStratinivi: iniviJJODESK: This little utility software written in Vb.net 2.0, allows you to : - switch IE proxy, - manage IP, - launch website, - launch other utilty tools , - launch and manage cmd, bat, vbs script. - and much more ..... First I wrote this tool for my personal use, because I work with several networks, and customer sites. I think many other software developpers have the same need. All parameters are customisable, and are store in an ini text file. And it can run on an USB stick. learn MVC: Just keeping all source code in one place. Thats all folksLJF.Utility: Utility?????Lucidity: Lucid WILDMixModes Synergy - The WPF Toolkit: MixModes Synergy 2010 is a complete toolset that simplifies user interface development in Windows Presentation Foundation based applications. Synergy includes rich user interface controls providing professional look and feel for your applications out of the box.Multi Targetted Rss Reader: A Multi Targetted Rss Reader demo that shows how to multi target your view model across different screens (WP7, Silverlight, WPF, Surface).Secure Batch Command Tool For Administrators: A command line tool that will help you to protect your passwords that you should provide in your batch files. This tool encrypt Dos commands and update the batch files in a way that keeps your batch file maintainable and easy to use.SharePoint 2010 Conditional Lookup Control: I created a "Conditional Lookup" control for SharePoint 2010. With this you can connect two lookup fields controls on list forms to fill the second control with values depending on the selected value in the first control. There is a demo inside.sql dot: Ease when making a connection to the sql serverwolisbetter: WOL is better!WP7PasswordsBackup: backup/sync client for windows phone 7 passwords app. ??????: ??????

    Read the article

  • Is Subversion(SVN) supported on Ubuntu 10.04 LTS 32bit?

    - by Chad
    I've setup subversion on Ubuntu 10.04, but can't get authentication to work. I believe all my config files are setup correctly, However I keep getting prompted for credentials on a SVN CHECKOUT. Like there is an issue with apache2 talking to svnserve. If I allow anonymous access checkout works fine. Does anybody know if there is a known issue with subversion and 10.04 or see a error in my configuration? below is my configuration: # fresh install of Ubuntu 10.04 LTS 32bit sudo apt-get install apache2 apache2-utils -y sudo apt-get install subversion libapache2-svn subversion-tools -y sudo mkdir /svn sudo svnadmin create /svn/DataTeam sudo svnadmin create /svn/ReportingTeam #Setup the svn config file sudo vi /etc/apache2/mods-available/dav_svn.conf #replace file with the following. <Location /svn> DAV svn SVNParentPath /svn/ AuthType Basic AuthName "Subversion Server" AuthUserFile /etc/apache2/dav_svn.passwd Require valid-user AuthzSVNAccessFile /etc/apache2/svn_acl </Location> sudo touch /etc/apache2/svn_acl #replace file with the following. [groups] dba_group = tom, jerry report_group = tom [DataTeam:/] @dba_group = rw [ReportingTeam:/] @report_group = rw #Start/Stop subversion automatically sudo /etc/init.d/apache2 restart cd /etc/init.d/ sudo touch subversion sudo cat 'svnserve -d -r /svn' > svnserve sudo cat '/etc/init.d/apache2 restart' >> svnserve sudo chmod +x svnserve sudo update-rc.d svnserve defaults #Add svn users sudo htpasswd -cpb /etc/apache2/dav_svn.passwd tom tom sudo htpasswd -pb /etc/apache2/dav_svn.passwd jerry jerry #Test by performing a checkout sudo svnserve -d -r /svn sudo /etc/init.d/apache2 restart svn checkout http://127.0.0.1/svn/DataTeam /tmp/DataTeam

    Read the article

  • Opera: closed window w/many tabs, window still open w/one tab, how to retrieve the many tabs

    - by Abel
    This is a little recipe for a little disaster: accidentally close a window with many important tabs open, only to find out that another window is still active with one tab open. Closing it will overwrite the saved tabs of the other window, which I want to recover. I need to recover the window with "many tabs" if possible,I didn't yet close the window with the one tab open, hopefully that prevents overwriting the saved settings. How do I retrieve, now that Opera is still active, the tabs of the closed window? I.e., where would Opera normally store these tabs when it closes a window? Can I prevent it from overwriting the saved state of "many tabs" with the current "one tab"?

    Read the article

  • connect remotely to apache2 on ubuntu 10.04

    - by ronakin
    I've apache2 server installed on a machine that connected to two different networks, therefore it has two different addresses: 192.168.1.111 (static ip on ethernet network) and 109.253.78.211. when connecting through 109.253.78.211 on the browser, the web pages are displayed perfectly, However, when connecting through 109.253.78.211 the web pages are displayed partially. I've not installed any firewalls. I'll really appreciate if you could redirect me to checks I should commit to reach the source of the problem. Thank you :)

    Read the article

  • Can't launch Oneiric x64 instance on Eucalyptus

    - by Bruno Reis
    EDIT: after many hours, I've found out that the problem has nothing to do with Eucalyptus. It looks like the image is buggy. Very, very buggy. More details in the end. I didn't manage to fix it, and I will file a bug. EDIT 2: I managed to fix it, it apparently works. I have a 4-machine cluster running Ubuntu Server Natty (11.04) x64. I've installed "Ubuntu Enterprise Cloud" from the installtion CD (then updated it) on each of these machines. The cloud seems to work fine, I have lots of virtual machines running Natty servers on them. Now I'd like to run Oneiric in a virtual machine, but somehow I can't. I downloaded Oneiric's (x64) image from http://cloud-images.ubuntu.com/oneiric/current/, published it (uec-publish-tarball oneiric-server-cloudimg-amd64.tar.gz oneiric-server-cloudimg-amd64) exactly as I did with Natty, then tried to launch an instance (euca-run-instances -n 1 -k my-key -t m1.small -z my-cloud emi-XXXXXXXX) using Oneiric's image, but the instance is not able to boot. With euca-get-console-output I get the following: [ 0.461269] VFS: Cannot open root device "sda1" or unknown-block(0,0) [ 0.462388] Please append a correct "root=" boot option; here are the available partitions: [ 0.463855] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 0.465331] Pid: 1, comm: swapper Not tainted 3.0.0-13-generic #22-Ubuntu [ 0.466526] Call Trace: [ 0.466989] [<ffffffff815d3ee5>] panic+0x91/0x194 [ 0.467860] [<ffffffff81ad1031>] mount_block_root+0xdc/0x18e [ 0.468891] [<ffffffff81ad126a>] mount_root+0x54/0x59 [ 0.469829] [<ffffffff81ad13dc>] prepare_namespace+0x16d/0x1a7 [ 0.470883] [<ffffffff81ad0d76>] kernel_init+0x140/0x145 [ 0.471837] [<ffffffff815f38e4>] kernel_thread_helper+0x4/0x10 [ 0.472889] [<ffffffff81ad0c36>] ? start_kernel+0x3df/0x3df [ 0.473884] [<ffffffff815f38e0>] ? gs_change+0x13/0x13 The filesystem is labeled "cloudimg-rootfs", inside the image both /etc/fstab and /boot/grub/grub.cfg always refer to the image by the label, everything seems to be correct, yet the kernel says it can't find the root file system. I've spent many hours googling, but nothing came out. I've asked on #ubuntu-server, but nobody knew what to do. I've asked on #eucalyptus but got no answer at all. Any ideas on why this is happening and how to solve it? Thanks EDIT: after many hours, I've found out that the problem has nothing to do with Eucalyptus. It looks like the image is buggy. Very, very buggy. The first problem is that the Kernel in the image is a -generic kernel, while I suppose it should be a -virtual one. I chrooted into the image, removed the -generic packages, replaced it with the -virtual ones. Then I extracted the new kernel (and replaced the original one (-generic) that came with the tarball) because I need it when I publish and launch an image with Eucalyptus. The problem described above was solved. But then, the console started showing this: mount: mount point ext4 does not exist If you check the /etc/fstab file in the image, it says: LABEL=cloudimg-rootfs ext4 defaults 0 1 Damnt, where's my mount point? Note that it is missing /proc as well. Well, when you think it is over, you will notice that your instance will have no network connectivity. Let's check /etc/network/interface: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback Oh my! It is missing eth0... here I stopped. I can't take no more. I give up. Looks like Canonical has just forgotten to properly set up this image. At first, I though: "have I downloaded a server image by mistake?", but no, I double checked. It is really the cloud image, it has even "cloud-init" installed (which is not, by default, on server images). They just forgot to prepare it. I will file a bug (and reference it here once this is done), and hope they fix it soon! EDIT 2: it looks like the network configuration was the last thing missing. I decided to test it with the fixes above, and it booted properly! However, I haven't got the slightest idea if the image is now good to go...

    Read the article

  • DNS resolution not working on Browsers but on Shell

    - by Shyam Sunder Verma
    Running dig/ping on any domain, give me correct ip. When I try to browse google.com in browser it does not work. When I pick the IP (via ping) and use it in browser, website open via IP fine. But further work does not work, because of name resolution problem. DO NOT works fine on : Ubuntu 9.10 installed in Virtual Box over Windows. Ubuntu 10.10 installed in Virtual Box over Windows. Ubuntu 9.10 installed on laptop. But Internet works fine on windows vista installed on laptop.

    Read the article

  • How do I setup a sip account with pennytel in empathy or ekiga in ubuntu 10.04?

    - by Glen
    Hi, I am trying to get my PennyTel VOIP account working in ubuntu 10.04. I know ubuntu use to use ekiga for sip calls. I also know that ubuntu now uses empathy for sip calls. However I can't get either program to work with my VOIP provider. In empathy I have no idea what details to enter. How does it know I want to use pennytel? What is my user name? I tired [email protected] but it did not work. In Ekiga I can't figure out how to use a sip provider. It looks like I can only use the Ekiga sip provider, which I don't want to use because I already have a PennyTel account. Any help would be appreciated. Thanks, Glen.

    Read the article

  • Where to find Ubuntu One logs

    - by Stéphane
    Ubuntu one does not synchronize files since I upgraded from 9.10 to 10.04. The preferences panel keeps showing "Synchronization in progress...", but files are not downloaded from the repository. It does not show any error message. Where do I find the programm logs, where I can investigate my problem?

    Read the article

  • Upgrade an Ubuntu 8.04 installation with VMware Server 1.0.8 and lots of guest OSes to Something Els

    - by Glyph
    I have an Ubuntu 8.04 (Hardy Heron) host machine which is running a whole slew of virtual machines in VMWare Server 1.0.8. Among other guest OSes, there is every release version of Ubuntu since 6.06, OpenSolaris 2009.06, and Windows XP. Right now I access these VMs from a variety of client OSes as well; Linux and Windows via the VMWare server console, and MacOS via X-forwarding the host machine's server console. I'd like to upgrade the host to Ubuntu 10.04 (Lucid Lynx), but from what I can tell, getting VMWare Server 1.x to work on a more recent version of Linux is a real pain. While VMware Server 2.x is a bit easier, it's still not packaged as Debian packages, so installing security updates is a big chore. As long as I'm upgrading anyway, I'd like to move to a virtualization solution that will allow me to automate applying updates. The options that I'm aware of right now are KVM (managed via virt-manager) and VirtualBox (as managed by its own tools or via its own libvirt bindings), but I'm open to other suggestions. For each option, I'd like to know how do I convert my guest images to the new format? am I going to have to re-activate my Windows guests (alternatively, "If the virtual hardware is different by default, can I avoid re-activation by changing some virtualization configuration to provide me with more similar virtual hardware") what are the management options like for each client OS (mac, linux, windows)? Thanks.

    Read the article

  • How do I configure an ordinary TV remote control to work with lirc on Linux?

    - by Allan Lewis
    I am running MythTV on Ubuntu 9.10 and I would like to use a TV remote to control it. I know that lirc needs a configuration file for the remote, but none of my remotes is in the official database. If I point a remote at the receiver on my TV card (a Pinnacle PCTV "Solo", model 72e) and press a button, dmesg logs the code generated by the remote, so I assume I just have to make a config file with a list of commands assigned to these codes. I've read a few how-tos but I still don't understand exactly how to create the config file. Some of the guides I've read refer to IR receivers on TV cards working at a "higher level of abstraction", which I take to mean that they decode the signal and provide a code, like the ones I can see in dmesg, rather than just giving raw data, but none of them explain where to go from there! Any help would be greatly appreciated!

    Read the article

  • connecting to internet via PC (Ubuntu Linux) on mobile phone (sony ericsson)

    - by Michel
    I have a Toshiba laptop with wi-fi connected internet. Now I wanna connect my phone to my laptop and use its Internet connection ( I can't buy new wi-fi or 3g supported mobile phone ). I have no problem connecting k610 to my laptop, and even shared my GPRS internet connection with my PC. but can't do contrary. How can I connect my k610 mobile (which not support wi-fi connections) to Internet via my Toshiba laptop ( with bluetooth ) ? P.S: My PC OS is Ubuntu Linux 9.10

    Read the article

  • How to create a Linux Media Server using Ubuntu?

    - by Thomas
    Hello all: I'm an intermediate Linux user and a relative beginner to servers. I would like some help finding resources on setting up a basic server. I have Googled, and am a member of the Ubuntu Forums, but just figure it can't hurt to ask the Stack Overflow community for help as well. I plan on installing on an old laptop (Lenovo Thinkpad R61i or Toshiba Satellite A105). I have downloaded the latest Ubuntu (9.10) but don't know how to do any of the configurations. I just want a server to store my files where I can access (download and/ or stream) from a browser. Any help you can give is greatly appreciated. Thanks! Thomas

    Read the article

  • Uninstall Git completely on Ubuntu?

    - by Millisami
    I installed Git on Ubuntu Lucid (latest) manually as following. cd ~/tmp wget http://kernel.org/pub/software/scm/git/git-1.7.0.6.tar.gz tar -xzvf git-1.7.0.6.tar.gz cd git-1.7.0.6.tar.gz ./configure sudo make sudo make install Now, how can I completely uninstall it?

    Read the article

  • How Do I Install a Webmin Module?

    - by ServerChecker
    I found that my Webmin doesn't come with the vsftpd module to configure vsftpd. I found on their site that that they have a download tarball. I downloaded it, but don't know what the proper steps are to add this tarball into the webmin config. I'm running Ubuntu Server 9.10 with Webmin 1.510, if that matters.

    Read the article

  • A specific user is unable to log in to vsftpd

    - by HackToHell
    I am setting up a new user let his name be ftpguy. He has access to only one directory /var/www/xxx. I have already chowned the directory so that he has write and read privileges. The user is also unable to login via ssh as I have disabled that by changing his shell to /sbin/nologin. Also, in vsftpd config, I have enabled the chroot_local_user. Now whenever I log in from ftp, i get an auth error. Connect socket #1008 to xxxxxxxx, port 21... 220 Welcome to blah FTP service. USER ftpguy 331 Please specify the password. PASS ********** 530 Login incorrect. I changed the password to something different several times, using the passwd command, nothing happens, i still the above error. However I am able to log in with my ssh creditals to my ftp server without any problems.(I do not use a key).

    Read the article

  • why is mailgraph not updating ?

    - by jack
    I just installed mailgraph on a Linux Ubuntu 10.04 box monitoring Postifix. Everything seems to be working fine, but the graphs are not always updating. When I refresh the web page or close the browser and come back later, the graph updates and moves to the left, showing new time, the the data line is not drawn. Sometimes it does not update for several hours. I had started, stopped and restarted mailgraph-init and that doesn't seem to make a difference. Any ideas?

    Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >