Search Results

Search found 2615 results on 105 pages for 'battery replacement'.

Page 72/105 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Dim (NEARLY blank) laptop screen, secondary screen works - why?

  - by LIttle Ancient Forest Kami

  My laptop screen is (almost) black while my secondary screen is fine. I believe it to be backlight / brightness related. Problem description it starts when I start the laptop system loads and works fine, just screen has problems I can see the screen though very faintly / dimly - it's hard to see anything which ain't very white e.g. starting screen has big Thinkpad logo in white, large font - I can see it, though very dimly second screen works very well Official backligtht debugging: using acpi setting as prescribed there for Thinkpads didn't help I can see an entry in /sys/class/backlight/ and it changes when I press hotkeys for brightness (current backlight power for instance goes up or down) acpi-off didn't helpm neither did acpi_backlight=vendor Hardware data Laptop is Thinkpad Edge with glossy screen. 4 processors, 2 cores, exemplary CPU data from cat /proc/cpuinfo reports Genuine Intel i5 (M 480 @ 2.67GHz). OS is Ubuntu Lucid, 10.04 LTS, 64-bit, with Linux generic kernel (2.6.32-44) and GNOME 2.32.2 (though I doubt there lies the problem). $ lspci | grep VGA 01:00.0 VGA compatible controller: ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series] $ lshw -C display *-display description: VGA compatible controller product: M92 [Mobility Radeon HD 4500 Series] vendor: ATI Technologies Inc physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:33 memory:c0000000-dfffffff(prefetchable) ioport:2000(size=256) memory:f0300000-f030ffff memory:f0320000-f033ffff(prefetchable) Driver I was NOT running any proprietary drivers, just checked with "Hardware drivers". There is one for ATI that is suggested there, though I didn't need it so far. UPDATE: changing the driver to proprietary one (ATI/AMD FGLRX) didn't help. Tried and failed Resetting / running on power or battery / charging / getting rid of static electricity / warming up *doesn't help* This is NOT a blank-screen problem, at least it isn't following official Ubuntu black-screen diagnostics - I can see my screen, though barely. What I will try next: - check last updates I've made - IIRC I am running on nomodeset already, but will verify this Any ideas how to proceed best? What is most probable cause?

  Read the article

• Is there a NVIDIA driver (for a 7-series card) that will actually work for 12.10?

  - by DS13

  I see many similar topics on this, but I've tried all their suggestions, and nothing has worked. ISSUE: I do a clean install of Ubuntu 12.10. Boots fine with the “nouveau” graphics driver – graphics are very slow and choppy. The three other driver options in Ubuntu (official NVIDIA drivers), all result in a variation of the black screen on boot up. There will be NO access to a command line/GUI in anyway what-so-ever (tried every option recommended out there, but the system is unusable at this stage). I can only reinstall, and try different drivers…and I only ever get one shot at it. QUESTIONS: Does anyone know of a NVIDIA driver that will actually work with a Nvidia GeForce 7350LE? Or a 7-series card in general? This is my second computer, and I’m just trying to get a working install of Ubuntu on it. I don’t want to put much money into it, as I have seen Ubuntu run great on much older/less capable machines. I’ve got a decent Intel processor (2.3Ghz), 2GB of RAM, 320GB hard drive, 32-bit architecture, and there is no other O/S installed. It appears as if the graphics card is holding me back. Should I just buy a cheap graphics card (non-NVIDIA) to put in as a replacement? TRIED SO FAR: -all drivers available in Ubuntu *all fail -manual install of some different NVIDIA drivers *all fail -also tried installing the generic kernel, Nvidia driver doesn't work in 12.10 *no difference -every method suggested to at least get a command line after switching to a NVIDIA driver *all fail

  Read the article

• How do I restore default menu/top panel text color in Gnome Classic?

  - by Kobby

  The default text/icon color in my top panel has changed from white to a very dark grey, making my menus virtually unreadable against the black of the Ambiance theme. This includes even the login screen menu. I used Gnome Tweak to change the theme to Adwaita, but while some text has gone light grey (e.g. Date/Time), the login menu text remains dark grey, as do most icons (e.g. dropbox, wireless, battery indicator...) in the top panel after I log in. I tried deleting the top panel altogether but the option of deleting under Super + Alt + Right Click is blocked off. I tried running a panel from the terminal, but it came up in strange colors too, plus icons had moved around and some parts of the panel were opaque and other parts transparent. Deleting the panel wouldn't solve the basic problem anyway, as my login menu would still be very dark grey and unreadable against the default (black) Ambiance background. I would like to keep Ambiance but I want to reset the color to default (white) again. Can anyone help me?

  Read the article

• Kubuntu apt-get -f install error

  - by ShaggyInjun

  I am seeing an error while running apt-get -f install. Can somebody help me out .. venkat@ubuntu:~/Downloads$ sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libjack-jackd2-0 Suggested packages: jackd2 The following packages will be upgraded: libjack-jackd2-0 1 upgraded, 0 newly installed, 0 to remove and 256 not upgraded. 109 not fully installed or removed. Need to get 0 B/197 kB of archives. After this operation, 3,072 B of additional disk space will be used. Do you want to continue [Y/n]? Y (Reading database ... 274641 files and directories currently installed.) Preparing to replace libjack-jackd2-0 1.9.8~dfsg.1-1ubuntu1 (using .../libjack-jackd2- 0_1.9.8~dfsg.2-1precise1_amd64.deb) ... Unpacking replacement libjack-jackd2-0 ... dpkg: error processing /var/cache/apt/archives/libjack-jackd2-0_1.9.8~dfsg.2- 1precise1_amd64.deb (--unpack): './usr/share/doc/libjack-jackd2-0/buildinfo.gz' is different from the same file on the system dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/libjack-jackd2-0_1.9.8~dfsg.2-1precise1_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• issues with ASUS S301L ultrabooks

  - by Wuerze

  I just like to tell you what still is a Problem in Ubuntu 14.04 and should be solved for a nice experience of this distribution. Unfortunately I do not have any hints to tell you, because I am just a user and know not much about programming. Anyway, I hope it helps. 1) Intel open source Graphics issues (proprietary) -when attaching HDMI-cable the screen switches to the external monitor and it's fine, but there is no switching back unless restart with HDMI deattached -black screen appears for like 2 seconds as if I would change screen in the settings; frequency increases with intensity of driver use (i.e. videos or video games) 2) hotkeys (commonly recognised) -there is no possibility to adjust brightness with the hotkeys (Fn+F5 and Fn+F6) 3) touchscreen (commonly recognised) -the touchscreen is behaving like a mouse -configuring gestures for the multi touch screen seems to always end in disabling touch pad gestures 4) panel symbols -battery symbol has got a low accuracy while it determines accurately the energy left; only 5 steps of energy are shown by the symbol Thank you all for participating in the solution of these problems! I will stay tuned and edit this list if something has been solved.

  Read the article

• Another hibernation question

  - by GeekOfTheWeek

  I installed Ubuntu on my Windows 7 Sager laptop using Wubi. Hibernate (i.e. suspend to disc) is not an option from the power icon, only suspend, shutdown, etc. Hibernate is also not an option from my battery/lid close options. I understand that hibernation is disabled by default in Ubuntu 12.04. I tried running pm-hibernate but I get the following message: Looking for splash system... none s2disk: Snapshotting system and then the computer just hangs with a black screen. According to the documentation here if this fails then I can't enable hibernate but it offers no help in making pm-hibernate succeed. Could swap be my problem? It looks like I have very small swap: user@ubuntu:~$ cat /proc/swaps Filename Type Size Used Priority /host/ubuntu/disks/swap.disk file 262140 0 -1 The advice on SwapFaq is only for the author's set up (e.g. I don't have an Ubuntu install disk since I used Wubi) and he says that 'INFO: This will not work for 12.04, resume from hibernate work differently in 12.04.' Any advice? I really need to get hibernate working to use my laptop as a, er, laptop. Thanks

  Read the article

• Dealing with numerous, simultaneous sounds in unity

  - by luxchar

  I've written a custom class that creates a fixed number of audio sources. When a new sound is played, it goes through the class, which creates a queue of sounds that will be played during that frame. The sounds that are closer to the camera are given preference. If new sounds arrive in the next frame, I have a complex set of rules that determines how to replace the old ones. Ideally, "big" or "important" sounds should not be replaced by small ones. Sound replacement is necessary since the game can be fast-paced at times, and should try to play new sounds by replacing old ones. Otherwise, there can be "silent" moments when an old sound is about to stop playing and isn't replaced right away by a new sound. The drawback of replacing old sounds right away is that there is a harsh transition from the old sound clip to the new one. But I wonder if I could just remove that management logic altogether, and create audio sources on the fly for new sounds. I could give "important" sounds more priority (closer to 0 in the corresponding property) as opposed to less important ones, and let Unity take care of culling out sound effects that exceed the channel limit. The only drawback is that it requires many heap allocations. I wonder what strategy people use here?

  Read the article

• How to disable discrete GPU using NVIDIA drivers?

  - by penzoiders

  I have a DELL studio XPS 13 (aka 1340) as of 12.04 most things run smoothly out of the box, but I have some power draining and warmness issues (if not to be called terrible heat issues) The system came with a NVIDIA GeForce 9500M (which has Hybrid SLI) and it shows up in "lspci" as these 2 cards 02:00.0 VGA compatible controller: NVIDIA Corporation G98 [GeForce 9200M GS] (rev a1) 03:00.0 VGA compatible controller: NVIDIA Corporation C79 [GeForce 9400M G] (rev b1) I had to install nvidia-current over noveau driver 'cause noveau does freeze the system after suspension. By installing nvidia-current and running nvidia-xconfig the resume process after suspension is fixed. By the way both with nvidia-current and noveau the system drains a lot of battery and heats up a lot. I suppose this is because the discrete GPU is always on. I don't really need 3D graphics on this system, if not the minimal to run unity and compiz for window management. So my question is: How do I disable, using nvidia-current, the discrete GPU 9200M and use only the integrated one 9400M? notes: In BIOS I have no option to disable discrete GPU This I think is not applicable because of the suspension-freeze issue (with noveau): https://help.ubuntu.com/community/HybridGraphics I've found this but I don't know which --sli option I should choose to fit my needs: http://manpages.ubuntu.com/manpages/hardy/man1/nvidia-xconfig.1.html My system has not optimus or cuda, but anyone can tell me if bumblebee can work for me?

  Read the article

• Can I install 12.04 packages on 11.10?

  - by Jason R

  I'm running 11.10 and am trying to apply the fix to this bug in Empathy, shown at the very bottom. There is an updated package for the offending component available in the Precise repository, and someone even posted a backported .deb package for use on Oneiric. However, when I try to install that package, it seems to have a dependency on a package that isn't available for Oneiric: (Reading database ... 254452 files and directories currently installed.) Preparing to replace telepathy-indicator 0.0.7-0ubuntu1 (using telepathy-indicator_0.1.1-0ubuntu1_amd64.deb) ... Unpacking replacement telepathy-indicator ... dpkg: dependency problems prevent configuration of telepathy-indicator: telepathy-indicator depends on libunity9 (>= 3.4.6); however: Package libunity9 is not installed. dpkg: error processing telepathy-indicator (--install): dependency problems - leaving unconfigured Errors were encountered while processing: telepathy-indicator The person who posted the backported telepathy-indicator package indicated that it depends upon libunity-dev-5.0; the latest version in the Oneiric repositories is a 4.0 vintage. I also can't find a libunity9 available for Oneiric, so I'm wondering: is it possible to just add the Precise repository to my list and pull the updated packages from there, or should I not expect that they would operate correctly?

  Read the article

• How do I stop video tearing? (Nvidia prop driver, non-compositing window manager)

  - by Chan-Ho Suh

  I have that problem which seemingly afflicts many using the proprietary Nvidia driver: Video tearing: fine horizontal lines (usually near the top of my display) when there is a lot of panning or action in the video. (Note: switching back to the default nouveau driver is not an option, as its seemingly nonexistent power-management drains my battery several times faster) I've tried Totem, Parole, and VLC, and tearing occurs with all of them. The best result has been to use X11 output in VLC, but there is still tearing with relatively moderate action. Hardware: MacBook Air 3,2 -- which has an Nvidia GeForce 320M. There are two common fixes for tearing with Nvidia prop drivers: Turn off compositing, since Nvidia proprietary drivers don't usually play nice with compositing window managers on Linux (Compiz is an exception I'm aware of). But I use an extremely lightweight window manager (Awesome window manager) which is not even capable of compositing (or any cool effects). I also have this problem in Xfce, where I have compositing disabled. Enabling sync to VBlank. To enable this, I set the option in nvidia-settings and then autostart it as nvidia-settings -l with my other autostart programs. This seems to work, because when I run glxgears, I get: $ glxgears Running synchronized to the vertical refresh. The framerate should be approximately the same as the monitor refresh rate. 303 frames in 5.0 seconds = 60.500 FPS 300 frames in 5.0 seconds = 59.992 FPS And when I check the refresh rate using nvidia-settings: $ nvidia-settings -q RefreshRate Attribute 'RefreshRate' (wampum:0.0; display device: DFP-2): 60.00 Hz. All this suggests sync to VBlank is enabled. As I understand it, this is precisely designed to stop tearing, and a lot of people's problem is even getting something like glxgears to output the correct info. I don't understand why it's not working for me. xorg.conf: http://paste.ubuntu.com/992056/ Example of observed tearing::

  Read the article

• Ubuntu for Phones / Touch vs Android, IOS and BlackBerry OS

  - by Ome Noes

  Currently I have a LG Google Nexus 4 with lots of issues because of the latest android 4.3 update. Since the update my battery drains within 7 hours when in it's standby / idle and even faster when I use it normaly! Before the Nexus 4 I had an Iphone but got sick of IOS because for me it's to much of a closed operating system and I dislike having to work with either Windows or Itunes. At this point neither Google or LG is willing to provide me (and all the others that have similar Nexus 4 problems) with a solution or even a reaction... Also i'm not very fond of the idea that the NSA (and maybe others) can and is currently monitoring millions of Android, IOS and BlackBerry OS devices all over the world. Since i've been using Ubuntu now very happily for almost 5 years I see Ubuntu for Phones / Touch as the only remedy for all this BS. Please be so kind to let me know when you will have a fully functioning version of your Ubuntu for Phones / Touch ready for consumer use. I'm realy sad that the Ubuntu Edge campaign didn't work out and hope to see lots and lots of future smartphones outfitted with Ubuntu a.s.a.p.! Keep up the good work!

  Read the article

• Noise Canceling Earphones

  - by Mark Treadwell

  I travel a lot. The hours spent droning through the sky can be made more tolerable with an MP3 player and a set of noise-cancelling headphones. Reducing the sound of the airflow and engines is a great relief. For a year or two, I used a pair of folding Sony MDR-NC5 Noise Canceling Headphones, the ear foam covers self-destructed. I replaced them with old washcloth material and was happy, but the DW thought it looked bad.  I switched to a new set of Sony MDR-NC6 Noise Canceling Headphones.  These worked equally well, although they did not fold as small as the MDR-NC5 headphones. Over four years of use, the MDR-NC6 headphones started cutting out and making popping noises.  This was not surprising considering the beating they took on travel in my backpack.  It looked like I needed another new set. The older MDR-NC5 headphones were still on the shelf with the hated washcloth covers.  A quick search online showed a vibrant business in selling replacement ear foams, often at exorbitant prices.  Nowhere did I see ear foam covers made for the oblong MDR-NC5.  I then realized that foam is stretchable and that the shape should not matter.  After another search and some consideration, I purchased 2-5/16" foam pad ear covers that were able to stretch over the MDR-NC5's strange shape.  Problem solved for less than $5.

  Read the article

• A Dozen USB Chargers Analyzed; Or: Beware the Knockoffs

  - by Jason Fitzpatrick

  When it comes to buying a USB charger one is just as good as another so you might as well buy the cheapest one, right? This interesting and detailed analysis of name brand, off-brand, and counterfeit chargers will have you rethinking that stance. Ken Shirriff gathered up a dozen USB chargers including official Apple chargers, counterfeit Apple chargers, as well as offerings from Monoprice, Belkin, Motorola, and other companies. After putting them all through a battery of tests he gave them overall rankings based on nine different categories including power stability, power quality, and efficiency. The take away from his research? Quality varied widely between brands but when sticking with big companies like Apple or HP the chargers were all safe. The counterfeit chargers (like the $2 Apple iPad charger knock-off he tested) proved to be outright dangerous–several actually melted or caught fire in the course of the project. Hit up the link below for his detailed analysis including power output readings for the dozen chargers. A Dozen USB Chargers in the Lab [via O'Reilly Radar] 6 Start Menu Replacements for Windows 8 What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8

  Read the article

• Is there a PROPRIETARY driver (NVIDIA or ATI) that actually works with 12.10?

  - by DS13

  NOTE: I see many similar topics on this, but I've tried all their suggestions, and nothing has worked. THE MAIN DIFFERENCE SEEMS TO BE: I always get a black screen with a blinking cursor, while others seem to get through the boot-up and see distorted graphics or just their wallpaper. ISSUE: I do a clean install of Ubuntu 12.10. Boots fine with the “nouveau” graphics driver – graphics (even just menus) are very slow, choppy, and distorted. The three other driver options in Ubuntu (official NVIDIA drivers), all result in a variation of the black screen on boot up. There will be NO access to a command line/GUI in anyway what-so-ever (tried every option recommended out there, but the system is unusable at this stage). I can only reinstall, and try different drivers…and I only ever get one shot at it. QUESTIONS: -Does anyone know of a PROPRIETARY driver that will actually work on 12.10 with a NVIDIA or ATI card? -Should I just buy a newer graphics card to put in as a replacement? MORE INFO: This is my second computer, and I’m just trying to get a working install of Ubuntu on it. I don’t want to put much money into it, as I have seen Ubuntu run great on much older/less capable machines. I’ve got a decent'ish Core2Duo Intel processor (2.13Ghz), 2GB of RAM, 320GB hard drive, 32-bit architecture, and there is no other O/S installed. It appears as if the graphics card (NVIDIA Geforce 7350 LE) is holding me back. TRIED SO FAR: -all drivers available in Ubuntu *all fail -manual install of some different NVIDIA drivers *all fail -also tried installing the generic kernel, Nvidia driver doesn't work in 12.10 *no difference -tried installing 12.04 *same results -every method suggested to at least get a command line after switching to a NVIDIA driver *all fail -UPDATE- Re-tried everything above with a new NVIDIA Geforce 210...same results for everything. -UPDATE #2- Re-tried everything above with a new AMD Radeon HD 6450...installed the proprietary driver from Ubuntu's "Software Sources" menu...EVERYTHING NOW WORKS. See "answer" below for summary.

  Read the article

• Error on /home prevents OS boot

  - by mdrg

  Ok, I'll try to explain it listing the events: motherboard battery is weak, loses config everytime I shut the PC down; system clock usually back to 1990-something; this time, it went up to 2148; ubuntu became somewhat unusable (firefox refusing certificates, dropbox blocked), so I restarted; manually set the clock to current date and restarted; during boot, ubuntu detects errors and start auto-fix, rebooting itself in the middle of it (like a hard reboot, no shutdown messages) next time, shows boot animation screen in text mode, with an error message after a while: "Errors were found while checking the disk drive or /home", with "attempt to fix, ignore, skip mounting or manual recovery" None of the options during the boot work, they just type the text to the screen, then I'm forced to physically restart. Now I'm using Mint LXDE live CD, and I can see all my partitions just fine, including /home (my home folder blocked due to encryption, the other user folder is accessible and everything in place). I'm not sure how to proceed now. I'd like to just fix ubuntu boot without reinstalling or anything like it (at least until 12.04). What should I do now? can I easily fix this somewhow? Thanks!

  Read the article

• Hard drive clicking noise on Acer AO722

  - by Blank

  I'm running Ubuntu 11.10 on an Acer Aspire One 722. Whenever I'm on battery power I get a clicking sound from my hard drive every 5 seconds or so (this does not happen when the laptop is plugged in). I'm dual booting with Windows 7 and I don't get the clicking sound in Windows. The clicking sound stops when I run the command:sudo hdparm -B 254 /dev/sda Also, according to:sudo smartctl -H /dev/sda my hard drive is healthy. Is this clicking sound something I can just ignore? Or is it a serious problem and will it eventually damage my computer? If so, how would I fix it? I have tried adding hdparm -B 254 /dev/sda to my /etc/rc.local file, but I still run into the clicking problem if my computer boots while plugged in and is then unplugged. Also, I'm finding this fix to be unreliable. Sometimes it works, sometimes it does not. Is this a good solution and is there a better way of doing this? Also, would running my laptop with a -B value of 254 have any negative effects? (I read somewhere about a lower level protecting the hard drive from bumps)

  Read the article

• Ubuntu 12.04 gets overheated, whereas I have no heating problems on Windows 7 whatsoever

  - by G K

  I bought a new laptop which came pre-installed with Windows 7. I love working on Ubuntu and hence installed it. I can work on Windows for 6 hours at a stretch and feel the laptop being only slightly warm, but 15 minutes into running Ubuntu and my laptop is too hot. The battery also drains out very quickly on Ubuntu. 1.5 hrs of backup on Ubuntu compared to 5-6 hrs on Windows. I previously owned a Dell Inspiron N5010 and everything ran smoothly on that. No heating issues. It came with intel i3 processor. So I'm wondering whether this problem has something to do with the processor? (AMD A8) Specs: HP Pavilion G6-2005AX Laptop (APU Quad Core A8/ 4GB/ 500GB/ Win7 HB/ 1.5GB Graph) 1 GB AMD Radeon HD 7670M Dedicated 512 MB AMD Radeon HD 7640G Graphics Integrated Is there any fix for this problem? Thanks in advance. Edit: I've installed ATI proprietary drivers suggested by Ubuntu.

  Read the article

• How can I get nVidia CUDA or OpenCL working on a laptop with nVidia discrete card/Intel Integrated Graphics?

  - by PeterDC

  Background: I'm a 3D artist (as a hobby) and have recently started using Ubuntu 12.04 LTS as a dual-boot with Windows 7. It's running on my a fairly new 64-bit Toshiba laptop with an nVidia GeForce GT 540M GPU (graphics card). It also, however has Intel Integrated Graphics (which I suspect Ubuntu's been using). So, when I render my 3D scenes to images on Windows, I am able to choose between using my CPU or my nVidia GPU (faster). From the 3D application, I can set the GPU to use either CUDA or OpenCL. In Ubuntu, there's no GPU option. After doing (too much?) research on the issues with Linux and the nVidia Optimus technology, I am slightly more enlightened, but a lot more confused. I don't care one bit about the Optimus technology, as battery life is not by any means an issue for me. Here's my question: What can I do to be able to use CUDA-utilizing programs (such as Blender) on my nVidia GPU in Ubuntu? Will I need nVidia drivers? (I have heard they don't play nicely with Optimus setups on Linux.) Is there at least a way to use OpenCL on my GPU in Ubuntu?

  Read the article

• 12.04 doesn't boot anymore after a power failure

  - by Felix

  I'm a Windows user and I have no experience with Linux and Ubuntu. I installed Ubuntu 12.04 on my netbook (Asus 1215B) and everything works fine. Yesterday I ran the "update application" and updated over 120 "things" (I have no idea what exactly). After that I was asked to reboot, and I did. Ubuntu starts again and at the load screen with these 5 dots that normally begin to change color, it freezes. After 20 minutes I took out the battery to try another reboot (yes, not the the best idea), and now nothing happens. I boot from the HDD and I get an Error BOOTMGR is missing. I have important data on the hard drive. Is there an option to get this fixed? Or if not, to at least get the data from the hard drive? Ubuntu 12.04 64-bit Edit: it is ONLY Ubuntu on this Netbook, which uses the whole 500gb HDD as 1 Partition. Filesystem is NTFS. Whole Hardware seems okay. The USB drive which i used to instl the Os was formated in fat32

  Read the article

• Java vs. C# - Productivity perspective

  - by Edin Dazdarevic

  If you have a number of years experience in working with JAVA and a number of years experience in working with C# and .NET, I would value your opinion on software development productivity differences between these two environments. One of our customers is considering to technically replace their existing software solution. As the replacement will require approx. 10 - 15 man years work, a choice for JAVA or .NET, based on productivity differences between the them, may significantly influence the investment required and time-to-market. Would you be able to provide us, based on your honest and expert opinion, an indication of software development productivity differences between JAVA and C#/.NET? I would prefer to receive an answer as follows: My experience is based on X years experience working with JAVA and X years experience working with C#/.NET. JAVA is X% more productive then C#.NET or C#/.NET is X% more productive than JAVA if you take the the following into account . . . . . . . Thanks

  Read the article

• List of Asus U46 laptop troubles with Ubuntu 12.04

  - by Cybertib

  I've bought my ASUS U46 last february. I would like to make it work better with Ubuntu 12.04. Note taht I was forced to install Ubuntu 12.04 (before its publication) by ethernet. After a successfull install, several problem remain unfixed such as : USB 3 just does not work correctly. Can be fixed, but I didn't succeed yet. Nvidia Optimus (means that you can use Intel Chipset or the Nvidia GeForce) is possible to use thanks to BumbleBee project. It seems to work, though. But Nvidia tools still say they don't see any Nvidia driver installed. Battery duration can be optimised by using Laptop-tools. Any standby state lead to a X server crash. A good CTRL+ALT+F1 login and "shutdown -r" avoids a brutal power off. And since few weeks, I have some bug reports right after boot about "unattended-upgrade", and dpkg troubles after any apt-get install or update (Linux kernel doesn't compile anymore), ... Are there any ways to fix those troubles ? I would need a bit of assistance, in fact. Thank you for you help, Sincerly yours, Thibault

  Read the article

• Black Screen (but with cursor) after wake-up from suspend to RAM

  - by Naseschwarz

  [Lenovo Thinkpad X60] After upgrading to 12.04, first thing I did was get suspend to HDD back, because I don't use my battery a lot. So I did that. After a while (about a week, I upgraded on release, not beta), maybe a week or so, I started getting black screens from time to time after waking it up from suspend to RAM. I never got that problem with suspend to HDD. As it only happens sometimes, I can't reproduce it o.O Sometimes it doesn't happen for a week (daily use, approx 2-6 wake-ups a day), then every single time. The precise symptoms are as follows: normally I got a black screen with my cursor on it, which can be moved, no problems there. I can't interact with the system in any way except for turning it off on the 1/0 button... the weird thing is, the cursor seems to react to what I had opened when going into suspend to RAM, so for instance one day I had writer open and then my cursor was a "I" for most of the screen. I only get this in 12.04, never had any problems with this in 9.04-11.10. Any ideas? Big thx in advance!

  Read the article

• trying to upgrade memory

  - by user214876

  I've been using Ubuntu on my laptop for awhile now. Not quite used to it yet. I've got a Acer Aspire with an orig 4 gig mem/500 gig HDD. Running 12.04 presently 32 bit sys. I have the 13.04 upgrade disc and want to upgrade my memory to 8 Gig. Everytime I install the 8 gig memory, the system won't boot to either version. I downloaded the 64 bit version of both versions of Ubuntu but no results yet. Can anyone offer a suggestion here? I'm kinda lost. Additional Information: The memory was purchased through Acer/Kingston. Recommended for this computer. I watched the video on installing it, so I doubt it's installed wrong. (There's only one way of putting it in). I swapped Op Sys, from Ubuntu 12.04 to 13.04 to 13.10 and now to Xubuntu 13.10 64 bit version. I'm still not having any luck with this upgrade. Would it be necessary to upgrade the CPU? It's just a thought, I don't know what else could keep me from utilizing the new memory. Additional Information: Called Kingston this afternoon, they are sending replacement lower density memory modules 2/4 gig - 8 gig. Tech service says I need to upgrade BIOS to utilize new memory install VIA Dos since it is no longer a windows system. I'm not sure how to go about that but it's a learning process I can live with. Thank you all for your help/support. I realize this isn't a Ubuntu problem but each new user of this op sys, seems to share simular problems and maybe someone can use this info to their advantage.

  Read the article

• Ubuntu 12.04 login screen flickers. “Could not write bytes: broken pipes”

  - by Brayn

  I use Ubuntu 12.04 x64 with a dual-boot setup. Yesterday it worked fine but this morning when I attempted to boot it gets to the login screen and then it just flickers, alternating between the login screen and the console showing boot items (mainly Apache, the last one being "Battery status" although it's a desktop) all with [OK] status. The only error that I can see is: "Could not write bytes: broken pipes" on top of the screen. The only things I can think of that could cause this are: This morning I had a removable hdd plugged in during boot time, which I usually don't have Yesterday I've installed Dwarven Fortress that requires some x32 libraries so I've installed ia32 using synaptic. As far as I know this shouldn't brake the system but I didn't reboot yesterday so I can't be sure. I've tried booting in recovery mode and tried running the utils there but still no luck. I've ran out of ideas. Thanks. EDIT: Forgot to mention that all partitions have plenty of free space EDIT2: In the end I just reinstalled Ubuntu as time was of the essence.

  Read the article

• android Emulator always stop at "waiting for Home..."

  - by wuwupp

  hi,there, I freshed install Eclipse, jdk, android sdk 1.5 in winxp. but when I run the "hello world" app, the emulator always stop at "andorid" loading message. In eclipse console, it shows "waiting for HOME..." and in DDMS LogCat, it shows following msg: there are some error and warning. So, what's wrong with my case? I have googled lots of results, but no one can help me. Please help me. Many thx 06-13 00:07:54.323: INFO/DEBUG(551): debuggerd: Jun 30 2009 17:00:51 06-13 00:07:54.383: INFO/vold(550): Android Volume Daemon version 2.0 06-13 00:07:54.724: ERROR/flash_image(556): can't find recovery partition 06-13 00:07:55.223: DEBUG/qemud(558): entering main loop 06-13 00:07:55.323: DEBUG/qemud(558): multiplexer_handle_control: unknown control message (18 bytes): 'ko:unknown command' 06-13 00:07:55.493: INFO/vold(550): New MMC card 'SU02G' (serial 1012966) added @ /devices/platform/goldfish_mmc.0/mmc_host/mmc0/mmc0:e118 06-13 00:07:55.773: INFO/vold(550): Disk (blkdev 179:0), 262144 secs (128 MB) 0 partitions 06-13 00:07:55.773: INFO/vold(550): New blkdev 179.0 on media SU02G, media path /devices/platform/goldfish_mmc.0/mmc_host/mmc0/mmc0:e118, Dpp 0 06-13 00:07:55.814: INFO/vold(550): Evaluating dev '/devices/platform/goldfish_mmc.0/mmc_host/mmc0/mmc0:e118/block/mmcblk0' for mountable filesystems for '/sdcard' 06-13 00:07:56.014: ERROR/vold(550): Error opening switch name path '/sys/class/switch/test2' (No such file or directory) 06-13 00:07:56.014: ERROR/vold(550): Error bootstrapping switch '/sys/class/switch/test2' (m) 06-13 00:07:56.073: ERROR/vold(550): Error opening switch name path '/sys/class/switch/test' (No such file or directory) 06-13 00:07:56.073: ERROR/vold(550): Error bootstrapping switch '/sys/class/switch/test' (m) 06-13 00:07:56.073: DEBUG/vold(550): Bootstrapping complete 06-13 00:07:56.743: INFO//system/bin/dosfsck(550): dosfsck 3.0.1 (23 Nov 2008) 06-13 00:07:56.753: INFO//system/bin/dosfsck(550): dosfsck 3.0.1, 23 Nov 2008, FAT32, LFN 06-13 00:07:56.783: INFO//system/bin/dosfsck(550): Checking we can access the last sector of the filesystem 06-13 00:07:56.893: INFO//system/bin/dosfsck(550): Boot sector contents: 06-13 00:07:56.924: INFO//system/bin/dosfsck(550): System ID "MSWIN4.1" 06-13 00:07:56.934: INFO//system/bin/dosfsck(550): Media byte 0xf8 (hard disk) 06-13 00:07:56.953: INFO//system/bin/dosfsck(550): 512 bytes per logical sector 06-13 00:07:56.974: INFO//system/bin/dosfsck(550): 512 bytes per cluster 06-13 00:07:57.005: INFO//system/bin/dosfsck(550): 32 reserved sectors 06-13 00:07:57.013: INFO//system/bin/dosfsck(550): First FAT starts at byte 16384 (sector 32) 06-13 00:07:57.013: INFO//system/bin/dosfsck(550): 2 FATs, 32 bit entries 06-13 00:07:57.023: INFO//system/bin/dosfsck(550): 1040384 bytes per FAT (= 2032 sectors) 06-13 00:07:57.043: INFO//system/bin/dosfsck(550): Root directory start at cluster 2 (arbitrary size) 06-13 00:07:57.043: INFO//system/bin/dosfsck(550): Data area starts at byte 2097152 (sector 4096) 06-13 00:07:57.043: INFO//system/bin/dosfsck(550): 258048 data clusters (132120576 bytes) 06-13 00:07:57.103: INFO//system/bin/dosfsck(550): 9 sectors/track, 2 heads 06-13 00:07:57.103: INFO//system/bin/dosfsck(550): 0 hidden sectors 06-13 00:07:57.123: INFO//system/bin/dosfsck(550): 262144 sectors total 06-13 00:07:57.313: DEBUG/qemud(558): fdhandler_accept_event: accepting on fd 10 06-13 00:07:57.313: DEBUG/qemud(558): created client 0xe078 listening on fd 8 06-13 00:07:57.313: DEBUG/qemud(558): fdhandler_event: disconnect on fd 8 06-13 00:07:57.623: DEBUG/qemud(558): fdhandler_accept_event: accepting on fd 10 06-13 00:07:57.623: DEBUG/qemud(558): created client 0xf028 listening on fd 8 06-13 00:07:57.643: DEBUG/qemud(558): client_fd_receive: attempting registration for service 'gsm' 06-13 00:07:57.763: DEBUG/qemud(558): client_fd_receive: - received channel id 1 06-13 00:08:12.553: INFO//system/bin/dosfsck(550): Checking for unused clusters. 06-13 00:08:13.483: INFO//system/bin/dosfsck(550): Checking free cluster summary. 06-13 00:08:13.643: DEBUG/AndroidRuntime(553): AndroidRuntime START <<<<<<<<<<<<<< 06-13 00:08:13.705: DEBUG/AndroidRuntime(553): CheckJNI is ON 06-13 00:08:13.793: INFO//system/bin/dosfsck(550): /dev/block//vold/179:0: 0 files, 1/258048 clusters 06-13 00:08:14.063: INFO/logwrapper(550): /system/bin/dosfsck terminated by exit(0) 06-13 00:08:14.143: DEBUG/vold(550): Filesystem check completed OK 06-13 00:08:14.683: INFO/vold(550): Sucessfully mounted vfat filesystem 179:0 on /sdcard (safe-mode on) 06-13 00:08:17.023: INFO/(554): ServiceManager: 0xac38 06-13 00:08:17.883: INFO/AudioFlinger(554): AudioFlinger's thread ready to run for output 0 06-13 00:08:18.163: INFO/CameraService(554): CameraService started: pid=554 06-13 00:08:21.824: DEBUG/AndroidRuntime(553): --- registering native functions --- 06-13 00:08:27.813: INFO/Zygote(553): Preloading classes... 06-13 00:08:27.994: DEBUG/dalvikvm(553): GC freed 764 objects / 42216 bytes in 88ms 06-13 00:08:30.234: DEBUG/dalvikvm(553): GC freed 278 objects / 17160 bytes in 48ms 06-13 00:08:33.094: DEBUG/dalvikvm(553): GC freed 208 objects / 12696 bytes in 44ms 06-13 00:08:34.343: DEBUG/dalvikvm(553): Trying to load lib /system/lib/libmedia_jni.so 0x0 06-13 00:08:35.803: DEBUG/dalvikvm(553): Added shared lib /system/lib/libmedia_jni.so 0x0 06-13 00:08:35.903: DEBUG/dalvikvm(553): Trying to load lib /system/lib/libmedia_jni.so 0x0 06-13 00:08:35.903: DEBUG/dalvikvm(553): Shared lib '/system/lib/libmedia_jni.so' already loaded in same CL 0x0 06-13 00:08:36.003: DEBUG/dalvikvm(553): Trying to load lib /system/lib/libmedia_jni.so 0x0 06-13 00:08:36.003: DEBUG/dalvikvm(553): Shared lib '/system/lib/libmedia_jni.so' already loaded in same CL 0x0 06-13 00:08:36.215: DEBUG/dalvikvm(553): Trying to load lib /system/lib/libmedia_jni.so 0x0 06-13 00:08:36.244: DEBUG/dalvikvm(553): Shared lib '/system/lib/libmedia_jni.so' already loaded in same CL 0x0 06-13 00:08:36.455: DEBUG/dalvikvm(553): GC freed 462 objects / 29144 bytes in 70ms 06-13 00:08:44.123: DEBUG/dalvikvm(553): GC freed 3584 objects / 171648 bytes in 125ms 06-13 00:09:10.473: DEBUG/dalvikvm(553): GC freed 11329 objects / 400856 bytes in 196ms 06-13 00:09:17.373: DEBUG/dalvikvm(553): GC freed 10472 objects / 438272 bytes in 199ms 06-13 00:09:24.563: DEBUG/dalvikvm(553): GC freed 10975 objects / 459800 bytes in 202ms 06-13 00:09:46.403: DEBUG/dalvikvm(553): GC freed 14372 objects / 506896 bytes in 252ms 06-13 00:09:53.793: DEBUG/dalvikvm(553): GC freed 11314 objects / 481360 bytes in 215ms 06-13 00:09:57.743: DEBUG/dalvikvm(553): GC freed 5928 objects / 248640 bytes in 195ms 06-13 00:10:01.324: DEBUG/dalvikvm(553): GC freed 349 objects / 37032 bytes in 190ms 06-13 00:10:05.253: DEBUG/dalvikvm(553): GC freed 778 objects / 48376 bytes in 217ms 06-13 00:10:06.564: DEBUG/dalvikvm(553): GC freed 321 objects / 37288 bytes in 219ms 06-13 00:10:08.194: DEBUG/dalvikvm(553): GC freed 477 objects / 29584 bytes in 212ms 06-13 00:10:08.663: DEBUG/dalvikvm(553): Trying to load lib /system/lib/libwebcore.so 0x0 06-13 00:10:09.743: DEBUG/dalvikvm(553): Added shared lib /system/lib/libwebcore.so 0x0 06-13 00:10:11.634: DEBUG/dalvikvm(553): GC freed 441 objects / 26224 bytes in 236ms 06-13 00:10:12.893: DEBUG/dalvikvm(553): GC freed 506 objects / 41464 bytes in 235ms 06-13 00:10:14.153: DEBUG/dalvikvm(553): GC freed 537 objects / 38832 bytes in 239ms 06-13 00:10:15.883: DEBUG/dalvikvm(553): GC freed 342 objects / 22552 bytes in 248ms 06-13 00:10:17.124: DEBUG/dalvikvm(553): GC freed 338 objects / 18736 bytes in 264ms 06-13 00:10:18.523: DEBUG/dalvikvm(553): GC freed 629 objects / 32136 bytes in 260ms 06-13 00:10:38.933: DEBUG/dalvikvm(553): GC freed 14257 objects / 497280 bytes in 368ms 06-13 00:10:46.453: DEBUG/dalvikvm(553): GC freed 11164 objects / 469576 bytes in 360ms 06-13 00:10:52.973: DEBUG/dalvikvm(553): GC freed 7134 objects / 311432 bytes in 339ms 06-13 00:10:55.595: DEBUG/dalvikvm(553): GC freed 752 objects / 43224 bytes in 520ms 06-13 00:10:56.863: DEBUG/dalvikvm(553): GC freed 598 objects / 31496 bytes in 307ms 06-13 00:10:58.543: DEBUG/dalvikvm(553): GC freed 413 objects / 26336 bytes in 355ms 06-13 00:10:59.263: INFO/Zygote(553): ...preloaded 1166 classes in 151403ms. 06-13 00:10:59.683: DEBUG/dalvikvm(553): GC freed 313 objects / 19952 bytes in 343ms 06-13 00:10:59.793: INFO/Zygote(553): Preloading resources... 06-13 00:11:00.683: DEBUG/dalvikvm(553): GC freed 54 objects / 11248 bytes in 340ms 06-13 00:11:05.723: DEBUG/dalvikvm(553): GC freed 337 objects / 15008 bytes in 317ms 06-13 00:11:08.703: DEBUG/dalvikvm(553): GC freed 280 objects / 11768 bytes in 312ms 06-13 00:11:09.303: INFO/Zygote(553): ...preloaded 48 resources in 9513ms. 06-13 00:11:09.795: INFO/Zygote(553): ...preloaded 15 resources in 454ms. 06-13 00:11:10.303: DEBUG/dalvikvm(553): GC freed 118 objects / 8616 bytes in 420ms 06-13 00:11:10.913: DEBUG/dalvikvm(553): GC freed 205 objects / 8104 bytes in 308ms 06-13 00:11:11.344: DEBUG/dalvikvm(553): GC freed 36 objects / 1400 bytes in 320ms 06-13 00:11:11.543: INFO/dalvikvm(553): Splitting out new zygote heap 06-13 00:11:12.973: INFO/dalvikvm(553): System server process 585 has been created 06-13 00:11:13.336: INFO/Zygote(553): Accepting command socket connections 06-13 00:11:14.963: INFO/jdwp(585): received file descriptor 10 from ADB 06-13 00:11:16.843: WARN/System.err(585): Can't dispatch DDM chunk 46454154: no handler defined 06-13 00:11:16.953: WARN/System.err(585): Can't dispatch DDM chunk 4d505251: no handler defined 06-13 00:11:17.763: DEBUG/dalvikvm(585): Trying to load lib /system/lib/libandroid_servers.so 0x0 06-13 00:11:19.714: DEBUG/dalvikvm(585): Added shared lib /system/lib/libandroid_servers.so 0x0 06-13 00:11:20.123: INFO/sysproc(585): Entered system_init() 06-13 00:11:20.223: INFO/sysproc(585): ServiceManager: 0x1017b8 06-13 00:11:20.359: INFO/SurfaceFlinger(585): SurfaceFlinger is starting 06-13 00:11:20.493: INFO/SurfaceFlinger(585): SurfaceFlinger's main thread ready to run. Initializing graphics H/W... 06-13 00:11:20.634: ERROR/MemoryHeapBase(585): error opening /dev/pmem: No such file or directory 06-13 00:11:20.704: ERROR/SurfaceFlinger(585): Couldn't open /sys/power/wait_for_fb_sleep or /sys/power/wait_for_fb_wake 06-13 00:11:22.013: ERROR/GLLogger(585): couldn't load library (Cannot find library) 06-13 00:11:22.103: INFO/SurfaceFlinger(585): EGL informations: 06-13 00:11:22.113: INFO/SurfaceFlinger(585): # of configs : 6 06-13 00:11:22.123: INFO/SurfaceFlinger(585): vendor : Android 06-13 00:11:22.123: INFO/SurfaceFlinger(585): version : 1.31 Android META-EGL 06-13 00:11:22.134: INFO/SurfaceFlinger(585): extensions: 06-13 00:11:22.134: INFO/SurfaceFlinger(585): Client API: OpenGL ES 06-13 00:11:22.193: INFO/EGLDisplaySurface(585): using (fd=22) 06-13 00:11:22.193: INFO/EGLDisplaySurface(585): id = 06-13 00:11:22.193: INFO/EGLDisplaySurface(585): xres = 320 px 06-13 00:11:22.193: INFO/EGLDisplaySurface(585): yres = 480 px 06-13 00:11:22.193: INFO/EGLDisplaySurface(585): xres_virtual = 320 px 06-13 00:11:22.193: INFO/EGLDisplaySurface(585): yres_virtual = 960 px 06-13 00:11:22.193: INFO/EGLDisplaySurface(585): bpp = 16 06-13 00:11:22.193: INFO/EGLDisplaySurface(585): r = 11:5 06-13 00:11:22.193: INFO/EGLDisplaySurface(585): g = 5:6 06-13 00:11:22.193: INFO/EGLDisplaySurface(585): b = 0:5 06-13 00:11:22.193: INFO/EGLDisplaySurface(585): width = 49 mm (165.877548 dpi) 06-13 00:11:22.193: INFO/EGLDisplaySurface(585): height = 74 mm (164.756760 dpi) 06-13 00:11:22.193: INFO/EGLDisplaySurface(585): refresh rate = 60.00 Hz 06-13 00:11:22.533: WARN/HAL(585): load: module=/system/lib/hw/copybit.goldfish.so error=Cannot find library 06-13 00:11:22.543: WARN/HAL(585): load: module=/system/lib/hw/copybit.default.so error=Cannot find library 06-13 00:11:22.553: WARN/SurfaceFlinger(585): ro.sf.lcd_density not defined, using 160 dpi by default. 06-13 00:11:22.644: INFO/SurfaceFlinger(585): OpenGL informations: 06-13 00:11:22.654: INFO/SurfaceFlinger(585): vendor : Android 06-13 00:11:22.654: INFO/SurfaceFlinger(585): renderer : Android PixelFlinger 1.0 06-13 00:11:22.654: INFO/SurfaceFlinger(585): version : OpenGL ES-CM 1.0 06-13 00:11:22.654: INFO/SurfaceFlinger(585): extensions: GL_OES_byte_coordinates GL_OES_fixed_point GL_OES_single_precision GL_OES_read_format GL_OES_compressed_paletted_texture GL_OES_draw_texture GL_OES_matrix_get GL_OES_query_matrix GL_ARB_texture_compression GL_ARB_texture_non_power_of_two GL_ANDROID_direct_texture GL_ANDROID_user_clip_plane GL_ANDROID_vertex_buffer_object GL_ANDROID_generate_mipmap 06-13 00:11:22.673: WARN/HAL(585): load: module=/system/lib/hw/copybit.goldfish.so error=Cannot find library 06-13 00:11:22.683: WARN/HAL(585): load: module=/system/lib/hw/copybit.default.so error=Cannot find library 06-13 00:11:22.703: WARN/HAL(585): load: module=/system/lib/hw/overlay.goldfish.so error=Cannot find library 06-13 00:11:22.713: WARN/HAL(585): load: module=/system/lib/hw/overlay.default.so error=Cannot find library 06-13 00:11:23.663: INFO/sysproc(585): System server: starting Android runtime. 06-13 00:11:23.733: INFO/sysproc(585): System server: starting Android services. 06-13 00:11:23.953: INFO/SystemServer(585): Entered the Android system server! 06-13 00:11:24.303: INFO/sysproc(585): System server: entering thread pool. 06-13 00:11:24.763: ERROR/GLLogger(585): couldn't load library (Cannot find library) 06-13 00:11:25.893: INFO/ARMAssembler(585): generated scanline__00000077:03545404_00000A01_00000000 [ 30 ipp] (51 ins) at [0x18f708:0x18f7d4] in 72796961 ns 06-13 00:11:26.193: INFO/SystemServer(585): Starting Power Manager. 06-13 00:11:26.953: INFO/SystemServer(585): Starting Activity Manager. 06-13 00:11:31.733: INFO/SystemServer(585): Starting telephony registry 06-13 00:11:32.054: INFO/SystemServer(585): Starting Package Manager. 06-13 00:11:32.553: INFO/Installer(585): connecting... 06-13 00:11:32.914: INFO/installd(555): new connection 06-13 00:11:35.193: INFO/PackageManager(585): Got library android.awt in /system/framework/android.awt.jar 06-13 00:11:35.313: INFO/PackageManager(585): Got library android.test.runner in /system/framework/android.test.runner.jar 06-13 00:11:35.324: INFO/PackageManager(585): Got library com.android.im.plugin in /system/framework/com.android.im.plugin.jar 06-13 00:11:44.643: DEBUG/PackageManager(585): Scanning app dir /system/framework 06-13 00:11:49.513: DEBUG/PackageManager(585): Scanning app dir /system/app 06-13 00:11:51.493: DEBUG/dalvikvm(585): GC freed 6088 objects / 251280 bytes in 1237ms 06-13 00:12:27.497: DEBUG/dalvikvm(585): GC freed 3435 objects / 216088 bytes in 792ms 06-13 00:12:29.213: DEBUG/PackageManager(585): Scanning app dir /data/app 06-13 00:12:30.223: DEBUG/PackageManager(585): Scanning app dir /data/app-private 06-13 00:12:30.425: INFO/PackageManager(585): Time to scan packages: 47.319 seconds 06-13 00:12:30.703: WARN/PackageManager(585): Unknown permission com.google.android.googleapps.permission.GOOGLE_AUTH in package com.android.providers.contacts 06-13 00:12:30.803: WARN/PackageManager(585): Unknown permission com.google.android.googleapps.permission.GOOGLE_AUTH.cp in package com.android.providers.contacts 06-13 00:12:30.853: WARN/PackageManager(585): Unknown permission com.google.android.googleapps.permission.GOOGLE_AUTH in package com.android.development 06-13 00:12:30.913: WARN/PackageManager(585): Unknown permission com.google.android.googleapps.permission.GOOGLE_AUTH.ALL_SERVICES in package com.android.development 06-13 00:12:31.133: WARN/PackageManager(585): Unknown permission com.google.android.googleapps.permission.GOOGLE_AUTH.YouTubeUser in package com.android.development 06-13 00:12:31.143: WARN/PackageManager(585): Unknown permission com.google.android.googleapps.permission.ACCESS_GOOGLE_PASSWORD in package com.android.development 06-13 00:12:31.234: WARN/PackageManager(585): Unknown permission com.google.android.providers.gmail.permission.WRITE_GMAIL in package com.android.settings 06-13 00:12:31.254: WARN/PackageManager(585): Unknown permission com.google.android.providers.gmail.permission.READ_GMAIL in package com.android.settings 06-13 00:12:31.303: WARN/PackageManager(585): Unknown permission com.google.android.googleapps.permission.GOOGLE_AUTH in package com.android.settings 06-13 00:12:31.683: WARN/PackageManager(585): Unknown permission com.google.android.googleapps.permission.GOOGLE_AUTH in package com.android.browser 06-13 00:12:31.803: WARN/PackageManager(585): Unknown permission com.google.android.googleapps.permission.GOOGLE_AUTH.mail in package com.android.contacts 06-13 00:12:34.603: DEBUG/dalvikvm(585): GC freed 2851 objects / 161304 bytes in 845ms 06-13 00:12:35.403: INFO/SystemServer(585): Starting Content Manager. 06-13 00:12:39.954: WARN/ActivityManager(585): Unable to start service Intent { action=android.accounts.IAccountsService comp={com.google.android.googleapps/com.google.android.googleapps.GoogleLoginService} }: not found 06-13 00:12:40.063: WARN/AccountMonitor(585): Couldn't connect to Intent { action=android.accounts.IAccountsService comp={com.google.android.googleapps/com.google.android.googleapps.GoogleLoginService} } (Missing service?) 06-13 00:12:40.253: INFO/SystemServer(585): Starting System Content Providers. 06-13 00:12:40.553: INFO/ActivityThread(585): Publishing provider settings: com.android.providers.settings.SettingsProvider 06-13 00:12:41.433: INFO/ActivityThread(585): Publishing provider sync: android.content.SyncProvider 06-13 00:12:41.683: INFO/SystemServer(585): Starting Battery Service. 06-13 00:12:42.293: ERROR/BatteryService(585): Could not open '/sys/class/power_supply/usb/online' 06-13 00:12:42.433: ERROR/BatteryService(585): Could not open '/sys/class/power_supply/battery/batt_vol' 06-13 00:12:42.543: ERROR/BatteryService(585): Could not open '/sys/class/power_supply/battery/batt_temp' 06-13 00:12:42.933: INFO/SystemServer(585): Starting Hardware Service. 06-13 00:12:43.398: DEBUG/qemud(558): fdhandler_accept_event: accepting on fd 10 06-13 00:12:43.623: DEBUG/qemud(558): created client 0x10fd8 listening on fd 11 06-13 00:12:43.743: DEBUG/qemud(558): client_fd_receive: attempting registration for service 'hw-control' 06-13 00:12:43.873: DEBUG/qemud(558): client_fd_receive: - received channel id 2 06-13 00:15:20.695: WARN/SurfaceFlinger(585): executeScheduledBroadcasts() skipped, contention on the client. We'll try again later...

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >