Search Results

Search found 6363 results on 255 pages for 'buford speed'.

Page 72/255 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

  • Which SSL certificate to buy [closed]

    - by Sparsh Gupta
    I am reading several notes on SSL certificates and comparison. What matters to me the most is speed. I can read that encryption is same with all different certificates available but I was wondering if there is any difference in the performance of the website with different certificates involved. I am ofcourse interested in end to end response times and I wonder if the type of encryption or number of certificates required as Chain Certificates makes a difference in speed. I dont really care for cost but looking for a good SSL certificate which ideally gives me absolutely no pain and best performance. Recommendations?

    Read the article

  • slow software raid

    - by Jure1873
    I've got software raid 1 for / and /home and it seems I'm not getting the right speed out of it. Reading from md0 I get around 100 MB/sec Reading from sda or sdb I get around 95-105 MB/sec I thought I would get more speed (while reading data) from two drives. I don't know what is the problem. I'm using kernel 2.6.31-18 hdparm -tT /dev/md0 /dev/md0: Timing cached reads: 2078 MB in 2.00 seconds = 1039.72 MB/sec Timing buffered disk reads: 304 MB in 3.01 seconds = 100.96 MB/sec hdparm -tT /dev/sda /dev/sda: Timing cached reads: 2084 MB in 2.00 seconds = 1041.93 MB/sec Timing buffered disk reads: 316 MB in 3.02 seconds = 104.77 MB/sec hdparm -tT /dev/sdb /dev/sdb: Timing cached reads: 2150 MB in 2.00 seconds = 1075.94 MB/sec Timing buffered disk reads: 302 MB in 3.01 seconds = 100.47 MB/sec Edit: Raid 1

    Read the article

  • Weird nfs performance: 1 thread better than 8, 8 better than 2!

    - by Joe
    I'm trying to determine the cause of poor nfs performance between two Xen Virtual Machines (client & server) running on the same host. Specifically, the speed at which I can sequentially read a 1GB file on the client is much lower than what would be expected based on the measured network connection speed between the two VMs and the measured speed of reading the file directly on the server. The VMs are running Ubuntu 9.04 and the server is using the nfs-kernel-server package. According to various NFS tuning resources, changing the number of nfsd threads (in my case kernel threads) can affect performance. Usually this advice is framed in terms of increasing the number from the default of 8 on heavily-used servers. What I find in my current configuration: RPCNFSDCOUNT=8: (default): 13.5-30 seconds to cat a 1GB file on the client so 35-80MB/sec RPCNFSDCOUNT=16: 18s to cat the file 60MB/s RPCNFSDCOUNT=1: 8-9 seconds to cat the file (!!?!) 125MB/s RPCNFSDCOUNT=2: 87s to cat the file 12MB/s I should mention that the file I'm exporting is on a RevoDrive SSD mounted on the server using Xen's PCI-passthrough; on the server I can cat the file in under seconds ( 250MB/s). I am dropping caches on the client before each test. I don't really want to leave the server configured with just one thread as I'm guessing that won't work so well when there are multiple clients, but I might be misunderstanding how that works. I have repeated the tests a few times (changing the server config in between) and the results are fairly consistent. So my question is: why is the best performance with 1 thread? A few other things I have tried changing, to little or no effect: increasing the values of /proc/sys/net/ipv4/ipfrag_low_thresh and /proc/sys/net/ipv4/ipfrag_high_thresh to 512K, 1M from the default 192K,256K increasing the value of /proc/sys/net/core/rmem_default and /proc/sys/net/core/rmem_max to 1M from the default of 128K mounting with client options rsize=32768, wsize=32768 From the output of sar -d I understand that the actual read sizes going to the underlying device are rather small (<100 bytes) but this doesn't cause a problem when reading the file locally on the client. The RevoDrive actually exposes two "SATA" devices /dev/sda and /dev/sdb, then dmraid picks up a fakeRAID-0 striped across them which I have mounted to /mnt/ssd and then bind-mounted to /export/ssd. I've done local tests on my file using both locations and see the good performance mentioned above. If answers/comments ask for more details I will add them.

    Read the article

  • linux: upload / download difference on network shares

    - by Batsu
    I have a Red Hat Enterprise Linux 6 (with SELinux) which shows significant differences of speed between download and upload (the latter significantly slower) of files shared over the LAN. The bottleneck seems to be the output of the linux machine since I have a rate around 1Mb/s when WinXP machines download files shared (using samba) by the RHEL machine uploading files from the RHEL to a WinXP's shared folder while uploading from the XP machines to linux's shares downloading XPs' shares on the RHEL any share between Windows machines only run smooth (around 50Mb/s). Since the upload from RHEL to WinXP's share is slowed too I would exclude an issue in the configuration of samba. What could possibly determine this limit in the upload speed? update: iptables doesn't show any output rule and disabling it doesn't show any noticeable difference, so I would rule out it too.

    Read the article

  • SSD Performance for PHP?

    - by Andrew Fashion
    My programmer just built an application with PHP using Doctrine ORM (will be a high traffic social networking website), and it's very heavy in PHP/Apache and CPU. The queries are wonderfully fast, and MySQL is barely using any CPU, it's just Apache. I was curious to if an SSD would help speed up PHP/Apache, because I know the bottleneck is in PHP reading multiple files, class files, and loading up a bunch of data. So common sense makes me think if PHP is reading multiple PHP files, an SSD would only help as far as read/write? I was thinking of doing a high performance SSD for the PHP application, but for user image uploads, I would just continue using a 15k SAS. Is there any performance issues regarding using an SSD in this kind of situation? And would it prove to help speed up PHP/Apache, and help the CPU problem out?

    Read the article

  • My VPS ubuntu server is very slow

    - by askmike
    I just installed a frech copy of Ubuntu 12.04 on my vps because my old installation was very slow, unfortunately this did not fix the problem. With slow I mean requests for my PHP websites take a long time, very slow (30 sec per request) to slow (3+ sec per request). When it's really bad SSH is also laggish. The websites are: askmike.org (pretty standard Wordpress) mvr.me (own PHP) slow? very slow: Here is a picture of loading a clean install of wordpress slow: here is a picture of loading a small PHP based website the vps The VPS has 256mb ram and an 25GB hdd. Besides serving the 2 small websites it isn't doing anything AFAIK. What have I installed Clean Ubuntu server 12.04 LAMP stack few things like git and nodejs (not using both) ossec (because I thought my server was getting hammered) munin What I already tried / done I installed munin so that I could watch io speed and such. The problem is that I don't know where to look for in the munin report. I checked logs and don't see anything strange (although I don't really know where to look for besides strange / repetitive errors and GET requests). I configured Apache MPM to: <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 40 MaxRequestsPerChild 0 </IfModule> (apache is using prefork, the default) Stats I copied the munin report as it appeared at 4:50 last night to a site hosted on a shared webhost. Note that tonight my mysql crashed somewhere after 1:00 (which is a new problem altogether), so therefor the graph for last night might look strange. Can anyone help me get my VPS up to normal speed? EDIT: Thanks for the replies. The VPS is 10 bucks a month and is from directvps.nl (Dutch host and I'm also dutch). I did two speed tests for disk IO: $ dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync 1073741824 bytes (1.1 GB) copied, 23.1506 s, 46.4 MB/s $ dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync 1073741824 bytes (1.1 GB) copied, 39.3796 s, 27.3 MB/s Anyway: how can I prove to my VPS host that it is to slow? I can understand a server being busy slowing a website down. But 5-30 sec loadtime for a normal PHP webpage?

    Read the article

  • Using TrueCrypt (software encryption) with an SSD

    - by Shackrock
    I use full drive encryption (FDE) w/ TrueCrypt on my laptop. I have a 2nd gen I7 with AES instruction support, so honestly I can't even notice a speed change on the system with it on. My question, is for those who know about SSD's a lot. I previously (early 2011) read articles about how software encryption will negate the speed benefits that an SSD provides - because of the need for the SSD to send a delete command, then a write command, for every encrypted write - instead of just writing over data like a regular HDD would (or something like this...honestly I can't remember...ha!). Anyway, any improvements in this field? Is it pointless for me to grab an SSD if I'm using FDE? Thanks all.

    Read the article

  • How can I restrict my mates to stop downloading?

    - by user239295
    We are sharing an internet broadband connection with 6 users at a place we live. We get 20 gb fup ( Fair usage policy) with 2 mbps speed from the ISP after the 20 gb is consumed the speed comes down to 512 kbps very difficult to browse any page. The problem is we cannot track which user/mate is downloading and ending the FUP. it is very difficult to track so is there something that we can allot per user some amount of space like 2 gb of downloading or restrict all from downloading so that we can utilize all the fup till the end of the month. We are using this connection as wifi configured. A adsl router is configured as wifi and we all using all 6 laptops. No PC. Any help would be appreciated. I apologize if i am not clear with my question.

    Read the article

  • ADSL improvement in recent years

    - by cleong
    Currently I have a 2mb/s ADSL connection. I signed up for the service more than five years ago. Has technology improved much during that time to allow for greater speed using the same wires? The building I live in is quite old and the lines aren't very good. They weren't able to support 6mb/s service back then. Now I notice that the lowest speed offered by my telco is 10mb/s. Even that would be a serious improvement over what I have now. Here are the stats from the modem: Line Attenuation (Up/Down) [dB]: 10,5 / 15,5 SN Margin (Up/Down) [dB]: 31,5 / 29,0

    Read the article

  • It takes a long time until windows xp recognize I connected USB diks

    - by Pavol G
    Hello IT guys, I have a problem with my new USB disk. When I connect it to my laptop with Windows XP SP2 it takes about 4-5min until Windows recognized it and show it as a new disk. I can also see (disk's LED is blinking) that something is scaning the disk when I connect it, when this is done Windows imediately recognize it. Also when I'm copying data to this disk the speed is about 3.5MB/sec. It's connected using USB2.0. I tried to check for spyware (using spybot), also run windows in safe mode. But still have the same problems. Do you have any idea what could help to solve this problem? On Windows Vista (another laptop) everything is ok, disk loads in about 15sec and speed is about 20-30MB/sec. Thanks a lot for every advice!

    Read the article

  • IPv6 feature in Network Adaptor is Slowing Internet

    - by Teknophilia
    The past few days, my internet browsing has become very poor. It's not a matter of speed, as a speed test will give at least 15Mbps. It seems as if my laptop has a hard time actually connecting to the sites. I've found a possible culprit, but don't know why it would affect anything: Going to adapter settings and disabling ipv6, but leaving ipv4, my browsing is back to normal. Re-enabling ipv6 brings back the issue. This is strange though, because I have always had ipv6 enabled. Moreover, using sites to test ipv6 compatibility, I fail with ipv6 enabled on my adapter, and pass when it's disabled. Ideas about why this is happening, and how to fix it?

    Read the article

  • Samsung 830 SSD

    - by anru
    I have a 128G SSD(830) of samsung installed on my win7 ultimate 64 bits machine. I have tried to copy a folder from my C drive to the SSD drive. And I have found out that copy speed is so slow, please look at picture below: I am just want to know, if this is because of I was tried to copy so many small files By the way. the SSD is Sata 3, but my mobo only has SATA 2 interface, I do not know if connect SATA 3 device to SATA 2 interface contributes to slow copy speed.

    Read the article

  • How to retry connections with wget?

    - by Andrei
    I have a very unstable internet connection, and sometimes have to download files as large as 200 MB. The problem is that the speed frequently drops and sits at --, -K/s and the process remains alive. I thought just to send some KILL signals to the process, but as I read in the wget manual about signals it doesn't help. How can I force wget to reinitialize itself and pick the download up where it left off after the connection drops and comes back up again? I would like to leave wget running, and when I come back, I want to see it downloading, and not waiting with speed --,-K/s.

    Read the article

  • How to increase the disk cache of Windows 7

    - by Mark Christiaens
    Under Windows 7 (64 bit), I'm reading through 9000 moderately sized files. In total, there is more than 200 MB of data. Using Java (JDK 1.6.21) I'm iterating over the files. The first 1400 or so go at full speed but then speed drops off to 4ms per file. It turns out that the main cost is incurred simply by opening the files. I'm opening the files using new FileInputStream (and of course closing them in time to avoid file leaks). After some investigating, I see that Windows' disk cache is using only 100 MB or so of RAM although I have 8 GiB available. I've tried increasing the cache size using the CacheSet tool but any values I provide are considered out of range. I've also tried enabling the LargeSystemCache registry key but (after rebooting) the CacheSet tool still indicates I'm using 100 MB of cache (and doesn't increase during the test run). Does anybody have any suggestions to "encourage" Windows 7 to cache my 9000 files?

    Read the article

  • How do I set up a proxy server for home with bandwidth control, download limit options?

    - by Quakeboy
    3 room mates share a single 2 Mbps connection. Have a 40GB per month download limit beyond which speed drops to 256Kbps which is annoying. One of the roommates abuses the connection by downloading beyond his quota limit. I have a Netgear WNR1000v2 Wireless router + ADSL Modem to connect to the internet. We all access internet via Wireless router which connects to ADSL Modem. I need a free proxy solution which can help me set 40GB / 3 (13 GB) limit for each person (every person has 2 devices - a PC and a phone with Wifi) Uniform Bandwidth control - when 2 people browse the internet they should get 1 Mbps each, and when 3 people access, they should get 2Mbps divided by 3. After each person crosses their monthly download limit, they should be able to access the internet with 256Kbps speed only or lesser. Can I have a custom firmware on my wireless router do this (or) Do I need a proxy server ? Please point me to any relevant tutorials (for example with Squid).

    Read the article

  • What factors can affect performance of Http Server written in C-Sharp? [on hold]

    - by Yousaf
    I am having trouble in terms of handling huge databases. I have multiple clients like 100-300 (clients are basically servers with i.e windows sql). Each client may have 38 thousand rows/listing of data, each row has 10-12 fields. I cannot afford to have json files of each client and than handle them on main server, because of memory issue. What if i have http server written in c or c# installed on clients and they return 250 rows in each response to the main server. How the factors like speed, memory or other issues can effect us ? What exactly I am asking for ? In short words if a server writter in c-sharp sends 250 rows per request. What factors can effect the performance of server ? for example. Speed, processing, Operating system, Implementation of algorithm of server ? How these factors can really effect the performance on large scale?

    Read the article

  • Speeding up ping

    - by sam
    We have pretty slow internet which makes working online quite tedious some times the internet is just generally slow, 600ms ping, 0.90mb download. (we are in Londnon, can you beleive). But other times the internet download speed is ok 5-8mb but the ping in 600ms is there a way we can speed this up. Good performance would be 5-10mb 30ms ping at our location, which we sometimes get in the morning. Resetting the router always seem to solve the ping issue for about 10 minutes but then it slows down again, any idea whats governing the ping and if anything can be done to address it ?

    Read the article

  • Encrypted directory makes file operations for whole disk very slow

    - by user1566277
    I am running an arm GNU/Linux and I have a SD-Card with three partitions on it. On one of the Partition I create an encfs file and then mount it on a directory which is in another partition to make that directory encrypted. Works fine. But now the writing speed on all the partitions are reduced drastically. I can understand that it should be slow for encrypted directory but why the its reducing write speed for all the partitions. E.g., if do not mount the encrypted directory 20MB is transferred in 2 Sec. roughly but with the encrypted directory mounted its like 20 Seconds for same file. I am using LUKS and all the partitons are ext3 except for the directory where /dev/mapper/encfs is mounted as type ext2. Any hints?

    Read the article

  • Windows 8: 100% disk active time, no actual data transferred

    - by fingerbangpalateclick
    Occasionally, like several times an hour, my hard drive will appear to lock up: Task Manager will show 100% active time with read and write speeds of 0. I can still switch between open windows, but anything that requires a disk access will stall for around a minute until the hard disk starts working properly again. It happens at apparently random intervals, and only happens in Windows 8. Not 7, nor Linux. It is probably not a problem with the disk itself: This is a relatively new hard drive, and S.M.A.R.T. is showing no errors. Only happens in Windows 8: not any other OS that has used the same partition, or different partitions. So, what is going on? How can I fix this? Note: this is a different problem then this one: Extremely high disk activity without any real usage My task manager would look similar, but Average Response Time, Read Speed, and Write Speed would all be 0.

    Read the article

  • Slow data transfer using SSH

    - by Floste
    The server is an ubuntu server 11.04 with sshd. SSH works fine for console programs. But data transfer is slow, which is very annoying when transferring large files. I tried two different client programs and changed the port, but the speed is always the same. I know the server can transfer data a lot faster over SSL, which afaik uses AES. I configured my SSH client to use AES, too, but no effect. Why is using SSH multiple times slower than SSL and is there a way to improve transfer speed of SSH?

    Read the article

  • Intel Corporation Ethernet Connection does not start properly

    - by Oscar Alejos
    I'm experiencing some problems when trying to connect my PC to the router through a switch. When the PC is directly connected to the router, everything works fine, Ubuntu (14.04) starts normally, and the Internet connection runs inmediately. The Ethernet controller is the Intel Corporation Ethernet Connection, as lspci returns: $ lspci | grep Eth 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04) However, when I try to connect through the switch what I get is the following. dmesg returns: $ dmesg | grep eth [ 1.035585] e1000e 0000:00:19.0 eth0: registered PHC clock [ 1.035587] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:a7:be:5d [ 1.035589] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.035625] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.357838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.165413] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.165574] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.641287] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.715086] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 16.715090] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [ 16.715117] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready It looks like eth0 is properly working. Actually, nm-tool returns: $ nm-tool - Device: eth0 [Conexión cableada] ------------------------------------------- Type: Wired Driver: e1000e State: connected Default: yes HW Address: 00:22:4D:A7:BE:5D Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.30 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 80.58.61.250 DNS: 80.58.61.254 DNS: 192.168.1.1 However, ping returns: $ ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. From 192.168.1.30 icmp_seq=1 Destination Host Unreachable From 192.168.1.30 icmp_seq=2 Destination Host Unreachable From 192.168.1.30 icmp_seq=3 Destination Host Unreachable The connection is restored by restarting it: # ifconfig eth0 down # ifconfig eth0 up From this point on, everything runs smoothly, as if the PC were directly connected to the router. It seems to be an issue related to the integrated LAN adaptor and the Ethernet controller, since my laptop connects without any problem. My desktop board is an Intel DB85FL. I'd be grateful if anyone could give some ideas on how to solve this issue. Thank you in advance.

    Read the article

  • Free Video Training: ASP.NET MVC 3 Features

    - by ScottGu
    A few weeks ago I blogged about a great ASP.NET MVC 3 video training course from Pluralsight that was made available for free for 48 hours for people to watch.  The feedback from the people that had a chance to watch it was really fantastic.  We also received feedback from people who really wanted to watch it – but unfortunately weren’t able to within the 48 hour window. The good news is that we’ve worked with Pluralsight to make the course available for free again until March 18th.  You can watch any of the course modules for free, through March 18th, on the www.asp.net/mvc website here: The 6 videos in this course are a total of 3 hours and 17 minutes long, and provide a nice overview of the new features introduced with ASP.NET MVC 3 including: Razor, Unobtrusive JavaScript, Richer Validation, ViewBag, Output Caching, Global Action Filters, NuGet, Dependency Injection, and much more.  Scott Allen is the presenter, and the format, video player, and cadence of the course is really excellent. It provides a great way to quickly come up to speed with all of the new features introduced with the new ASP.NET MVC 3 release. Introductory ASP.NET MVC 3 course also coming soon The above course provides a good way for people already familiar with ASP.NET MVC to quickly learn the new features in the V3 release. Pluralsight is also working on a new introductory ASP.NET MVC 3 course series designed for developers who are brand new to ASP.NET MVC, and who want an end to end training curriculum on how to come up to speed with it.  It will cover all of the basics of ASP.NET MVC (including the new Razor view engine), how to use EF code first for data access, using JavaScript/AJAX with MVC, security scenarios with MVC, unit testing applications, deploying applications, and more. I’m excited to pre-announce that we’ll also make this new introductory series free on the www.asp.net/mvc web-site for anyone to watch. I’ll do another blog post linking to it once it is live and available. Hope this helps, Scott

    Read the article

  • raid md device is not remove from memory, how to overcome this problem

    - by santhosha
    i create raid 10 , i removed two arrays form md11 one by one , after that i going to editing the contents those are mounted ( it will be not responding stage), after i try for remove arrays those are left it is shows device or resource busy ( is not removed from memory). i try to terminate process this is also not work, i absorve from 4 days resync will be 8.0% it can not modifying. cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec mdadm -D /dev/md11 /dev/md11: Version : 00.90.03 Creation Time : Sun Jan 16 16:20:01 2011 Raid Level : raid10 Array Size : 286743936 (273.46 GiB 293.63 GB) Device Size : 143371968 (136.73 GiB 146.81 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 11 Persistence : Superblock is persistent Update Time : Sun Jan 16 16:56:07 2011 State : active, degraded, resyncing Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K Rebuild Status : 8% complete UUID : 5e124ea4:79a01181:dc4110d3:a48576ea Events : 0.23 Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 4 8 145 2 faulty spare rebuilding /dev/sdj1 3 8 65 3 active sync /dev/sde1 umount /dev/md11 umount: /dev/md11: not mounted mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 kill -9 2128 kill -9 5018 kill -9 27605 kill -9 30562 kill -3 30591 mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec

    Read the article

  • Get the MakeUseOf eBook Guide to Speeding Up Windows for Free

    - by ETC
    Our friends over at MakeUseOf.com have released yet another eBook in their series of Guides to, well, just about everything. This one gives you some tips for speeding up your Windows PC. The guide has a ton of different tips, and while I wouldn’t necessarily say you follow every single tip to the letter (since everybody’s setup is different), it does give you lots of great ideas for speeding up your PC, as well as links to resources, and instructions for how to perform various cleanup tasks. The best tips? Make sure to keep your PC crapware-free, upgrade your RAM if you’re low, scan for viruses, and run some type of disk cleanup on a regular basis. Download the MakeUseOf Windows on Speed Guide (PDF) [Direct Download Link] Windows on Speed [MakeUseOf] Latest Features How-To Geek ETC How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware Comix is an Awesome Comics Archive Viewer for Linux Get the MakeUseOf eBook Guide to Speeding Up Windows for Free Need Tech Support? Call the Star Wars Help Desk! [Video Classic] Reclaim Vertical UI Space by Adding a Toolbar to the Left or Right Side of Firefox Androidify Turns You into an Android-style Avatar Reader for Android Updates; Now with Feed Widgets and More

    Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >