Search Results

Search found 30311 results on 1213 pages for 'dont ask ubun'.

Page 72/1213 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• How do I align my partition table properly?

  - by Jorge Castro

  I am in the process of building my first RAID5 array. I've used mdadm to create the following set up: root@bondigas:~# mdadm --detail /dev/md1 /dev/md1: Version : 00.90 Creation Time : Wed Oct 20 20:00:41 2010 Raid Level : raid5 Array Size : 5860543488 (5589.05 GiB 6001.20 GB) Used Dev Size : 1953514496 (1863.02 GiB 2000.40 GB) Raid Devices : 4 Total Devices : 4 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Wed Oct 20 20:13:48 2010 State : clean, degraded, recovering Active Devices : 3 Working Devices : 4 Failed Devices : 0 Spare Devices : 1 Layout : left-symmetric Chunk Size : 64K Rebuild Status : 1% complete UUID : f6dc829e:aa29b476:edd1ef19:85032322 (local to host bondigas) Events : 0.12 Number Major Minor RaidDevice State 0 8 16 0 active sync /dev/sdb 1 8 32 1 active sync /dev/sdc 2 8 48 2 active sync /dev/sdd 4 8 64 3 spare rebuilding /dev/sde While that's going I decided to format the beast with the following command: root@bondigas:~# mkfs.ext4 /dev/md1p1 mke2fs 1.41.11 (14-Mar-2010) /dev/md1p1 alignment is offset by 63488 bytes. This may result in very poor performance, (re)-partitioning suggested. Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=16 blocks, Stripe width=48 blocks 97853440 inodes, 391394047 blocks 19569702 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 11945 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848 Writing inode tables: ^C 27/11945 root@bondigas:~# ^C I am unsure what to do about "/dev/md1p1 alignment is offset by 63488 bytes." and how to properly partition the disks to match so I can format it properly.

  Read the article

• Build .deb package from source, without installing it

  - by Mechanical snail

  Suppose I have an installer program or source tarball for some program I want to install. (There is no Debian package available.) First I want to create a .deb package out of it, in order to be able to cleanly remove the installed program in the future (see Uninstalling application built from source, If I build a package from source how can I uninstall or remove completely?). Also, installing using a package prevents it from clobbering files from other packages, which cannot be guaranteed if you run the installer or sudo make install. Checkinstall From reading the answers there and elsewhere, I gather the usual solution is to use checkinstall to build the package. Unfortunately, it seems checkinstall does not prevent make install from clobbering system files from other packages. For example, according to Reverting problems caused by checkinstall with gcc build: I created a Debian package from the install using sudo checkinstall -D make install. [...] I removed it using Synaptic Package Manager. As it turns out, [removing] the package checkinstall created from make install tried to remove every single file the installation process touched, including shared gcc libraries like /lib64/libgcc_s.so. I then tried to tell checkinstall to build the package without installing it, in the hope of bypassing the issue. I created a dummy Makefile: install: echo "Bogus" > /bin/qwertyuiop and ran sudo checkinstall --install=no. The file /bin/qwertyuiop was created, even though the package was not installed. In my case, I do not trust the installer / make install to not overwrite system files, so this use of checkinstall is ruled out. How can I build the package, without installing it or letting it touch system files? Is it possible to run Checkinstall in a fakechrooted debootstrap environment to achieve this? Preferably the build should be done as a normal user rather than root, which would prevent the process from overwriting system files if it goes wrong.

  Read the article

• pulseaudio daemon won't start on headless server install

  - by JPbuntu

  Can't get the pulseaudio daemon to start on Ubuntu 11.1. I followed the instructions on the PulseAudio headdless server installation post but when I run: $pulseaudio -D I get: E: [pulseaudio] main.c: Daemon startup failed. and in syslog: pulseaudio[3042]: [pulseaudio] server-lookup.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11 Any suggestions? Thanks

  Read the article

• Accessing a Novell share on Trusty Tahr?

  - by tohuwawohu

  After upgrading my pc to the current LTS release 14.04, i found that i can't access novell shares using ncpfs any more. It seems that the ncp-related packages (libncp and so on) have been present in the 14.04 repos, but got removed: (see launchpad, ubuntuupdates and Debian Bug #712779). Is there still any way to install the ncp-related components? Are there any other tools to access or even mount a novell shre from a 14.04 system? EDIT: Oddly enough, ncpfs and libncp are still available in the current LTS Version of Mint (Mint 17 "Qiana").

  Read the article

• Ubuntu CPU Fan at 2200 RPM and CPU top at 90°C

  - by T-Erra

  I have a problem with my CPU heat. I'm running Ubuntu 14.04 (64bit) and I have issues with the cooling. I know it might be a hardware issue, but I've checked, the fan is running and in my GUI I use the command "sensors" which shows me a RPM of 2200 and a CPU temperature of 60°C while I'm not running any software. This seems to be really mysterious. However, if I start my IDE (Eclipse), Firefox and Chromium at the same time, the CPU temp goes up to 75-90° Celsius. I doubt that this is common for a system with 16 GB RAM, an i7 Processor and an Intel water cooling system and I also never had some issues like this before when I was running Ubuntu 12.04 or 13.04. Fan Speed At 60°C it's at 1300 RPM, and after start up Eclipse and Firefox it's at approximately 2200 RPM and between 75°C - 90°C depending on how many windows and IDE's I've opened. If I use the "top" command, there are just few processes like Xorg or Compiz which are taking up to 10% CPU usage at maximum, during the time I'm not running any software. I have tried to upgrade the Linux kernel, where I failed. After upgrading, I wasn't able to boot anymore so I tried to remove the new kernel from the boot directory and updated my grub file to an old entry, which works fine now, but still with the temperature issue. My NVIDIA drivers is also up to date, which dropped some issues I had before with the CPU load. So it can't be a problem with the graphic card. How can I find out, where the problem is, or why my CPU gets that high temperatures, which I only should get while playing games with high end graphics and so on? Did anyone have some similar issues before?

  Read the article

• SSH new connection begins to hang (not reject or terminate) after a day or so on Ubuntu 13.04 server

  - by kross

  Recently we upgraded the server from 12.04 LTS server to 13.04. All was well, including after a reboot. With all packages updated we began to see a strange issue, ssh works for a day or so (unclear on timing) then a later request for SSH hangs (cannot ctrl+c, nothing). It is up and serving webserver traffic etc. Port 22 is open (ips etc altered slightly for posting): nmap -T4 -A x.acme.com Starting Nmap 6.40 ( http://nmap.org ) at 2013-09-12 16:01 CDT Nmap scan report for x.acme.com (69.137.56.18) Host is up (0.026s latency). rDNS record for 69.137.56.18: c-69-137-56-18.hsd1.tn.provider.net Not shown: 998 filtered ports PORT STATE SERVICE VERSION 22/tcp open ssh OpenSSH 6.1p1 Debian 4 (protocol 2.0) | ssh-hostkey: 1024 54:d3:e3:38:44:f4:20:a4:e7:42:49:d0:a7:f1:3e:21 (DSA) | 2048 dc:21:77:3b:f4:4e:74:d0:87:33:14:40:04:68:33:a6 (RSA) |_256 45:69:10:79:5a:9f:0b:f0:66:15:39:87:b9:a1:37:f7 (ECDSA) 80/tcp open http Jetty 7.6.2.v20120308 | http-title: Log in as a Bamboo user - Atlassian Bamboo |_Requested resource was http://x.acme.com/userlogin!default.action;jsessionid=19v135zn8cl1tgso28fse4d50?os_destination=%2Fstart.action Service Info: OS: Linux; CPE: cpe:/o:linux:linux_kernel Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 12.89 seconds Here is the ssh -vvv: ssh -vvv x.acme.com OpenSSH_5.9p1, OpenSSL 0.9.8x 10 May 2012 debug1: Reading configuration data /Users/tfergeson/.ssh/config debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to x.acme.com [69.137.56.18] port 22. debug1: Connection established. debug3: Incorrect RSA1 identifier debug3: Could not load "/Users/tfergeson/.ssh/id_rsa" as a RSA1 public key debug1: identity file /Users/tfergeson/.ssh/id_rsa type 1 debug1: identity file /Users/tfergeson/.ssh/id_rsa-cert type -1 debug1: identity file /Users/tfergeson/.ssh/id_dsa type -1 debug1: identity file /Users/tfergeson/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.1p1 Debian-4 debug1: match: OpenSSH_6.1p1 Debian-4 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9 debug2: fd 3 setting O_NONBLOCK debug3: load_hostkeys: loading entries for host "x.acme.com" from file "/Users/tfergeson/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /Users/tfergeson/.ssh/known_hosts:10 debug3: load_hostkeys: loaded 1 keys debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],ssh-rsa debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 130/256 debug2: bits set: 503/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA dc:21:77:3b:f4:4e:74:d0:87:33:14:40:04:68:33:a6 debug3: load_hostkeys: loading entries for host "x.acme.com" from file "/Users/tfergeson/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /Users/tfergeson/.ssh/known_hosts:10 debug3: load_hostkeys: loaded 1 keys debug3: load_hostkeys: loading entries for host "69.137.56.18" from file "/Users/tfergeson/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /Users/tfergeson/.ssh/known_hosts:6 debug3: load_hostkeys: loaded 1 keys debug1: Host 'x.acme.com' is known and matches the RSA host key. debug1: Found key in /Users/tfergeson/.ssh/known_hosts:10 debug2: bits set: 493/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /Users/tfergeson/.ssh/id_rsa (0x7ff189c1d7d0) debug2: key: /Users/tfergeson/.ssh/id_dsa (0x0) debug1: Authentications that can continue: publickey debug3: start over, passed a different list publickey debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /Users/tfergeson/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Server accepts key: pkalg ssh-rsa blen 277 debug2: input_userauth_pk_ok: fp 3c:e5:29:6c:9d:27:d1:7d:e8:09:a2:e8:8e:6e:af:6f debug3: sign_and_send_pubkey: RSA 3c:e5:29:6c:9d:27:d1:7d:e8:09:a2:e8:8e:6e:af:6f debug1: read PEM private key done: type RSA debug1: Authentication succeeded (publickey). Authenticated to x.acme.com ([69.137.56.18]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: fd 3 setting TCP_NODELAY debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ATLAS_OPTS debug3: Ignored env rvm_bin_path debug3: Ignored env TERM_PROGRAM debug3: Ignored env GEM_HOME debug3: Ignored env SHELL debug3: Ignored env TERM debug3: Ignored env CLICOLOR debug3: Ignored env IRBRC debug3: Ignored env TMPDIR debug3: Ignored env Apple_PubSub_Socket_Render debug3: Ignored env TERM_PROGRAM_VERSION debug3: Ignored env MY_RUBY_HOME debug3: Ignored env TERM_SESSION_ID debug3: Ignored env USER debug3: Ignored env COMMAND_MODE debug3: Ignored env rvm_path debug3: Ignored env COM_GOOGLE_CHROME_FRAMEWORK_SERVICE_PROCESS/USERS/tfergeson/LIBRARY/APPLICATION_SUPPORT/GOOGLE/CHROME_SOCKET debug3: Ignored env JPDA_ADDRESS debug3: Ignored env APDK_HOME debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env Apple_Ubiquity_Message debug3: Ignored env __CF_USER_TEXT_ENCODING debug3: Ignored env rvm_sticky_flag debug3: Ignored env MAVEN_OPTS debug3: Ignored env LSCOLORS debug3: Ignored env rvm_prefix debug3: Ignored env PATH debug3: Ignored env PWD debug3: Ignored env JAVA_HOME debug1: Sending env LANG = en_US.UTF-8 debug2: channel 0: request env confirm 0 debug3: Ignored env JPDA_TRANSPORT debug3: Ignored env rvm_version debug3: Ignored env M2_HOME debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env rvm_ruby_string debug3: Ignored env LOGNAME debug3: Ignored env M2_REPO debug3: Ignored env GEM_PATH debug3: Ignored env AWS_RDS_HOME debug3: Ignored env rvm_delete_flag debug3: Ignored env EC2_PRIVATE_KEY debug3: Ignored env RUBY_VERSION debug3: Ignored env SECURITYSESSIONID debug3: Ignored env EC2_CERT debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 I can hard reboot (only mac monitors at that location) and it will again be accessible. This now happens every single time. It is imperative that I get it sorted. The strange thing is that it behaves initially then starts to hang after several hours. I perused logs previously and nothing stood out. From the auth.log, I can see that it has allowed me in, but still I get nothing back on the client side: Sep 20 12:47:50 cbear sshd[25376]: Accepted publickey for tfergeson from 10.1.10.14 port 54631 ssh2 Sep 20 12:47:50 cbear sshd[25376]: pam_unix(sshd:session): session opened for user tfergeson by (uid=0) UPDATES: Still occurring even after setting UseDNS no and commenting out #session optional pam_mail.so standard noenv This does not appear to be a network/dns related issue, as all services running on the machine are as responsive and accessible as ever, with the exception of sshd. Any thoughts on where to start?

  Read the article

• How to fix “Module ndiswrapper not found"

  - by jason328

  I have Ubuntu 12.10 and whenever I run sudo modprobe ndiswrapper, I get the following error. FATAL: Module ndiswrapper not found. The command dkms status returns with... ndiswrapper, 1.57, 3.2.0-32-generic, i686: installed The make.log in ndiswrapper returns with... DKMS make.log for ndiswrapper-1.57 for kernel 3.5.0-18-generic (i686) Wed Nov 7 22:16:12 EST 2012 make -C /usr/src/linux-headers-3.5.0-18-generic M=/var/lib/dkms/ndiswrapper /1.57/build make[1]: Entering directory `/usr/src/linux-headers-3.5.0-18-generic' LD /var/lib/dkms/ndiswrapper/1.57/build/built-in.o MKEXPORT /var/lib/dkms/ndiswrapper/1.57/build/crt_exports.h MKEXPORT /var/lib/dkms/ndiswrapper/1.57/build/hal_exports.h MKEXPORT /var/lib/dkms/ndiswrapper/1.57/build/ndis_exports.h MKEXPORT /var/lib/dkms/ndiswrapper/1.57/build/ntoskernel_exports.h MKEXPORT /var/lib/dkms/ndiswrapper/1.57/build/ntoskernel_io_exports.h MKEXPORT /var/lib/dkms/ndiswrapper/1.57/build/rtl_exports.h MKEXPORT /var/lib/dkms/ndiswrapper/1.57/build/usb_exports.h CC [M] /var/lib/dkms/ndiswrapper/1.57/build/crt.o CC [M] /var/lib/dkms/ndiswrapper/1.57/build/hal.o CC [M] /var/lib/dkms/ndiswrapper/1.57/build/iw_ndis.o CC [M] /var/lib/dkms/ndiswrapper/1.57/build/loader.o CC [M] /var/lib/dkms/ndiswrapper/1.57/build/ndis.o /var/lib/dkms/ndiswrapper/1.57/build/ndis.c: In function ‘NdisGetCurrentProcessorCounts’: /var/lib/dkms/ndiswrapper/1.57/build/ndis.c:2657:24: error: ‘struct kernel_stat’ has no member named ‘cpustat’ /var/lib/dkms/ndiswrapper/1.57/build/ndis.c:2658:31: error: ‘struct kernel_stat’ has no member named ‘cpustat’ /var/lib/dkms/ndiswrapper/1.57/build/ndis.c:2659:17: error: ‘struct kernel_stat’ has no member named ‘cpustat’ make[2]: *** [/var/lib/dkms/ndiswrapper/1.57/build/ndis.o] Error 1 make[1]: *** [_module_/var/lib/dkms/ndiswrapper/1.57/build] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-3.5.0-18-generic' make: *** [modules] Error 2 I have installed commons, utils-1.9, dkms, source but it's still returning this error. How do I fix this?

  Read the article

• What is the difference between a desktop environment and a window manager?

  - by Zolomon

  As the title says. I'm having a really hard time trying to understand what the differences between a desktop environment and a window manager are? EDIT: This is what I found out later. There are basically three layers that can be included in the Linux desktop: X Windows – This is the foundation that allows for graphic elements to be drawn on the display. X Windows builds the primitive framework that allows moving of windows, interactions with keyboard and mouse, and draws windows. This is required for any graphical desktop. Window Manager – The Window Manager is the piece of the puzzle that controls the placement and appearance of windows. Window Managers include: Enlightenment, Afterstep, FVWM, Fluxbox, IceWM, etc. Requires X Windows but not a desktop environment. Desktop Environment – This is where it begins to get a little fuzzy for some. A Desktop Environment includes a Window Manager but builds upon it. The Desktop Environment typically is a far more fully integrated system than a Window Manager. Requires both X Windows and a Window Manager.

  Read the article

• Ubuntu Sudo apt-get -f install

  - by Justin

  I was trying to install a program. And It said that my Dependencies were unmet. And that I should run, sudo apt-get -f install. I have moved everything I didn't need in /etc/apt/sources.list.d/ into the trash. My source.list is all Natty while I am running Oneiric. So maybe I need a new source.list? But here are the things I have: justin@justin-000:~$ sudo apt-get -f install [sudo] password for justin: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: linux-image-3.0.0-13-generic Suggested packages: fdutils linux-doc-3.0.0 linux-source-3.0.0 linux-tools The following NEW packages will be installed: linux-image-3.0.0-13-generic 0 upgraded, 1 newly installed, 0 to remove and 3 not upgraded. 2 not fully installed or removed. Need to get 0 B/36.5 MB of archives. After this operation, 117 MB of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 270736 files and directories currently installed.) Unpacking linux-image-3.0.0-13-generic (from .../linux-image-3.0.0-13- generic_3.0.0-13.22_i386.deb) ... Done. dpkg: error processing /var/cache/apt/archives/linux-image-3.0.0-13 generic_3.0.0-13.22_i386.deb (--unpack): corrupted filesystem tarfile - corrupted package archive No apport report written because MaxReports is reached already dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.0.0-13-generic /boot/vmlinuz-3.0.0-13-generic run-parts: executing /etc/kernel/postrm.d/zz-extlinux 3.0.0-13-generic /boot/vmlinuz-3.0.0-13-generic P: Checking for EXTLINUX directory... found. P: Writing config for /boot/vmlinuz-3.0.0-12-generic... P: Writing config for /boot/vmlinuz-2.6.38-11-generic... P: Installing debian theme... done. run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.0.0-13-generic /boot/vmlinuz-3.0.0-13-generic Errors were encountered while processing: /var/cache/apt/archives/linux-image-3.0.0-13-generic_3.0.0-13.22_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) justin@justin-000:~$ sudo apt-get update justin@justin-000:~$ sudo apt-get update Ign dl.google.com stable InRelease Ign dl.google.com stable InRelease Get:1dl.google.com stable Release.gpg [198 B] Ign us.archive.ubuntu.com oneiric InRelease Ign us.archive.ubuntu.com oneiric-security InRelease Ign http://us.archive.ubuntu.com oneiric-updates InRelease Get:2 dl.google.com stable Release.gpg [198 B] Get:3 dl.google.com stable Release [1,347 B] Get:4 dl.google.com stable Release [1,338 B] Hit us.archive.ubuntu.com oneiric Release.gpg Hit us.archive.ubuntu.com oneiric-security Release.gpg Get:5/dl.google.com stable/main i386 Packages [1,220 B] Hit tp://us.archive.ubuntu.com oneiric-updates Release.gpg Ign tp://dl.google.com stable/main TranslationIndex Get:6 tp://dl.google.com stable/main i386 Packages [464 B] Ign ttp://ppa.launchpad.net oneiric InRelease Hit ttp://us.archive.ubuntu.com oneiric Release Ign ttp://ppa.launchpad.net oneiric InRelease Ign ttp://dl.google.com stable/main TranslationIndex Hit ttp://ppa.launchpad.net oneiric Release.gpg Hit ttp://us.archive.ubuntu.com oneiric-security Release Hit ttp://ppa.launchpad.net oneiric Release.gpg Hit ttp://us.archive.ubuntu.com oneiric-updates Release Hit ttp://us.archive.ubuntu.com oneiric/main Sources Hit ttp://us.archive.ubuntu.com oneiric/restricted Sources Hit ttp://us.archive.ubuntu.com oneiric/universe Sources Hit ttp://us.archive.ubuntu.com oneiric/multiverse Sources Hit ttp://us.archive.ubuntu.com oneiric/main i386 Packages Hit ttp://ppa.launchpad.net oneiric Release Hit ttp://us.archive.ubuntu.com oneiric/restricted i386 Packages Hit ttp://us.archive.ubuntu.com oneiric/universe i386 Packages Hit ttp://us.archive.ubuntu.com oneiric/multiverse i386 Packages Hit ttp://us.archive.ubuntu.com oneiric/main TranslationIndex Hit ttp://us.archive.ubuntu.com oneiric/multiverse TranslationIndex Hit ://us.archive.ubuntu.com oneiric/restricted TranslationIndex Hit htp://us.archive.ubuntu.com oneiric/universe TranslationIndex Hit htp://us.archive.ubuntu.com oneiric-security/main Sources Hit ttp://us.archive.ubuntu.com oneiric-security/restricted Sources Hit ttp://ppa.launchpad.net oneiric Release Hit ttp://us.archive.ubuntu.com oneiric-security/universe Sources Hit tp://us.archive.ubuntu.com oneiric-security/multiverse Sources Hit htp://us.archive.ubuntu.com oneiric-security/main i386 Packages Hit tp://us.archive.ubuntu.com oneiric-security/restricted i386 Packages Hit ttp://us.archive.ubuntu.com oneiric-security/universe i386 Packages Hit ttp://us.archive.ubuntu.com oneiric-security/multiverse i386 Packages Hit htp://ppa.launchpad.net oneiric/main Sources Hit ttp://ppa.launchpad.net oneiric/main i386 Packages Ign htp://ppa.launchpad.net oneiric/main TranslationIndex Hit ttp://us.archive.ubuntu.com oneiric-security/main TranslationIndex Hit ttp://us.archive.ubuntu.com oneiric-security/multiverse TranslationIndex Hit htp://us.archive.ubuntu.com oneiric-security/restricted TranslationIndex Hit htp://us.archive.ubuntu.com oneiric-security/universe TranslationIndex Ign htp://dl.google.com stable/main Translation-en_US Hit htp://us.archive.ubuntu.com oneiric-updates/main Sources Hit htp://us.archive.ubuntu.com oneiric-updates/restricted Sources Hit tp://us.archive.ubuntu.com oneiric-updates/universe Sources Hit htp://us.archive.ubuntu.com oneiric-updates/multiverse Sources Hit htp://us.archive.ubuntu.com oneiric-updates/main i386 Packages Ign htp://dl.google.com stable/main Translation-en Hit ttp://ppa.launchpad.net oneiric/main Sources Hit htp://ppa.launchpad.net oneiric/main i386 Packages Hit ttp://us.archive.ubuntu.com oneiric-updates/restricted i386 Packages Ign htp://dl.google.com stable/main Translation-en_US Ign htp://ppa.launchpad.net oneiric/main TranslationIndex Hit hp://us.archive.ubuntu.com oneiric-updates/universe i386 Packages Hit ttp://us.archive.ubuntu.com oneiric-updates/multiverse i386 Packages Hit htp://us.archive.ubuntu.com oneiric-updates/main TranslationIndex Hit htp://us.archive.ubuntu.com oneiric-updates/multiverse TranslationIndex Hit htp://us.archive.ubuntu.com oneiric-updates/restricted TranslationIndex Ign htp://dl.google.com stable/main Translation-en Hit htp://us.archive.ubuntu.com oneiric-updates/universe TranslationIndex Hit ttp://us.archive.ubuntu.com oneiric/main Translation-en Hit ttp://us.archive.ubuntu.com oneiric/multiverse Translation-en Hit htp://us.archive.ubuntu.com oneiric/restricted Translation-en Hit htp://us.archive.ubuntu.com oneiric/universe Translation-en Hit htp://us.archive.ubuntu.com oneiric-security/main Translation-en Hit hp://us.archive.ubuntu.com oneiric-security/multiverse Translation-en Hit htp://us.archive.ubuntu.com oneiric-security/restricted Translation-en Hit htp://us.archive.ubuntu.com oneiric-security/universe Translation-en Hit htp://us.archive.ubuntu.com oneiric-updates/main Translation-en Hit htp://us.archive.ubuntu.com oneiric-updates/multiverse Translation-en Hit htp://us.archive.ubuntu.com oneiric-updates/restricted Translation-en Hit htp://us.archive.ubuntu.com oneiric-updates/universe Translation-en Ign htp://ppa.launchpad.net oneiric/main Translation-en_US Ign htt://ppa.launchpad.net oneiric/main Translation-en Ign htp://ppa.launchpad.net oneiric/main Translation-en_US Ign htp://ppa.launchpad.net oneiric/main Translation-en Fetched 4,765 B in 2s (2,158 B/s) Reading package lists... Done justin@justin-000:~$

  Read the article

• How do I know if I am running Wubi or a proper dual-boot?

  - by Don

  I tried to setup a "proper" Windows/Ubuntu dual-boot system, by installing Ubuntu from a USB key. However, I simply could not get the laptop to boot off the USB despite the fact that I made the appropriate changes to the boot device order in the BIOS. So I then turned to Wubi, and (to cut a long story short) it seems I now have a proper dual-boot setup, because I don't need to launch Ubuntu from windows. When I start the laptop, I get that screen that asks me whether I want to run Windows or Ubuntu. However, I'm still not sure if this is a proper dual-boot setup, because when I run windows, it seems that my C: and D: drives are still the same size. If it was a proper dual boot I'd expect separate partitions to have been created for Ubuntu which would have removed some space from the C: and D: drive sizes displayed in Windows. Is there some way that I can confirm whether I'm running a proper dual-boot, and if not, is there some process for converting a Wubi installation to a proper dual-boot?

  Read the article

• No HDMI Audio with GeForce 9600GT and nForce board

  - by Bobby

  I've been trying to get HDMI with sound working for the last few days, and I'm a little bit out of ideas. (I've verified that the hardware/Setup works via Windows.) aplay does not list my HDMI device: $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 1: ALC662 rev1 Digital [ALC662 rev1 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 I've already compiled the alsa drivers (1.0.24) from a snapshot (with --with-oss=no) and added the line options snd-hda-intel model=auto # Tried 3stack-dig and 6stack-dig too to /etc/modprobe.d/alsa-base.conf. Still, the device does not show up. If it is important, the HDMI TV is at the moment not configured to be part of the X session (I've tried that to, at least with X restart, and it didn't change anything). What did I miss? $ lspci 00:00.0 Host bridge: nVidia Corporation Device 07c3 (rev a2) 00:00.1 RAM memory: nVidia Corporation nForce 630i memory controller (rev a2) 00:01.0 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.1 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.2 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.3 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.4 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.5 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.6 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:02.0 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:03.0 ISA bridge: nVidia Corporation MCP73 LPC Bridge (rev a2) 00:03.1 SMBus: nVidia Corporation MCP73 SMBus (rev a1) 00:03.2 RAM memory: nVidia Corporation MCP73 Memory Controller (rev a1) 00:03.4 RAM memory: nVidia Corporation MCP73 Memory Controller (rev a1) 00:04.0 USB Controller: nVidia Corporation GeForce 7100/nForce 630i USB (rev a1) 00:04.1 USB Controller: nVidia Corporation MCP73 [nForce 630i] USB 2.0 Controller (EHCI) (rev a1) 00:08.0 IDE interface: nVidia Corporation MCP73 IDE (rev a1) 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1) 00:0a.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1) 00:0b.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1) 00:0c.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1) 00:0d.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1) 00:0e.0 IDE interface: nVidia Corporation MCP73 IDE (rev a2) 00:0f.0 Ethernet controller: nVidia Corporation MCP73 Ethernet (rev a2) 02:00.0 VGA compatible controller: nVidia Corporation G94 [GeForce 9600 GT] (rev a1)   $ aplay -L default pulse Playback/recording through the PulseAudio sound server front:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Front speakers surround40:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Digital IEC958 (S/PDIF) Digital Audio Output dmix:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample mixing device dmix:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample mixing device dsnoop:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample snooping device dsnoop:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample snooping device hw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct hardware device without any conversions hw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct hardware device without any conversions plughw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Hardware device with all software conversions plughw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Hardware device with all software conversions

  Read the article

• Waiting for required medium software center

  - by tavoe

  I'm trying to install the proprietary AMD drivers through Software Sources. I tick the box for fglrx-updates, and it says applying changes and fills 10% of a progress bar. It then sites there for hours (I left the computer unattended). Trying to get this process to finish, I found that the Ubuntu software center progress tab display a message reading: Applying Changes: Waiting for required medium What in the world does that mean and how can I get it to move on?

  Read the article

• Installer Reboots at "Detecting hardware" (disks and other hardware) on all recent Server Installs

  - by Ryan Rosario

  I have a very frustrating problem with my PC. I cannot install any recent version of Ubuntu Server (or even Desktop) since 9.04 even using the text-based installer. I boot from a USB stick created by Unetbootin (I also tried other methods such as startup disk creator with no difference). On the Server installer, it gets to "Detecting Hardware" (the second one about disks and all other hardware, not network hardware) and then either hangs at 0% (waited 24 hours), or reboots after a minute or two. My system (late 2007): ASUS P5NSLI motherboard Intel Core 2 Duo E6600 2.4Ghz 2 x 1GB Corsair 667MHz RAM nVidia GeForce 6600 I have unplugged everything (including the only hard disk, CD-ROMs and floppy). I have only one stick of RAM (tried each one to no avail) and am booting the installer from a USB stick (booting from CD-ROM yields the same problem). I also tried several of the boot options (nomodeset, nousb, acpi=off, noapic, i915.modeset=1/0, xforcevesa) in all combinations) to no avail. The only active parts of my system are the video card, mouse, keyboard and USB stick. I have also updated the BIOS to the most recent version. (FWIW, on the Desktop installer, I get a black screen after hitting the Install option.) Even after removing "quiet" I am unable to see what kernel panic is occurring (or not occurring) to cause the install to crash. I am only able to save the debug logs via a simple webserver in the installer. After the last line (I repeatedly refreshed), the server stops responding and the installer hangs or reboots: Jan 2 01:04:03 main-menu[302]: INFO: Menu item 'disk-detect' selected Jan 2 01:04:04 kernel: [ 309.154372] sata_nv 0000:00:0e.0: version 3.5 Jan 2 01:04:04 kernel: [ 309.154409] sata_nv 0000:00:0e.0: Using SWNCQ mode Jan 2 01:04:04 kernel: [ 309.154531] sata_nv 0000:00:0e.0: setting latency timer to 64 Jan 2 01:04:04 kernel: [ 309.164442] scsi0 : sata_nv Jan 2 01:04:04 kernel: [ 309.167610] scsi1 : sata_nv Jan 2 01:04:04 kernel: [ 309.167762] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 10 Jan 2 01:04:04 kernel: [ 309.167774] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 10 Jan 2 01:04:04 kernel: [ 309.167948] sata_nv 0000:00:0f.0: Using SWNCQ mode Jan 2 01:04:04 kernel: [ 309.168071] sata_nv 0000:00:0f.0: setting latency timer to 64 Jan 2 01:04:04 kernel: [ 309.171931] scsi2 : sata_nv Jan 2 01:04:04 kernel: [ 309.173793] scsi3 : sata_nv Jan 2 01:04:04 kernel: [ 309.173943] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe800 irq 11 Jan 2 01:04:04 kernel: [ 309.173954] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe808 irq 11 Jan 2 01:04:04 kernel: [ 309.174061] pata_amd 0000:00:0d.0: version 0.4.1 Jan 2 01:04:04 kernel: [ 309.174160] pata_amd 0000:00:0d.0: setting latency timer to 64 Jan 2 01:04:04 kernel: [ 309.177045] scsi4 : pata_amd Jan 2 01:04:04 kernel: [ 309.178628] scsi5 : pata_amd Jan 2 01:04:04 kernel: [ 309.178801] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 Jan 2 01:04:04 kernel: [ 309.178811] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 Jan 2 01:04:04 net/hw-detect.hotplug: Detected hotpluggable network interface eth0 Jan 2 01:04:04 net/hw-detect.hotplug: Detected hotpluggable network interface lo Jan 2 01:04:04 kernel: [ 309.485062] ata3: SATA link down (SStatus 0 SControl 300) Jan 2 01:04:04 kernel: [ 309.633094] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jan 2 01:04:04 kernel: [ 309.641647] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133 Jan 2 01:04:04 kernel: [ 309.641658] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32) Jan 2 01:04:04 kernel: [ 309.657614] ata1.00: configured for UDMA/133 Jan 2 01:04:04 kernel: [ 309.657969] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5 Jan 2 01:04:04 kernel: [ 309.658482] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jan 2 01:04:04 kernel: [ 309.658588] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) Jan 2 01:04:04 kernel: [ 309.658812] sd 0:0:0:0: [sda] Write Protect is off Jan 2 01:04:04 kernel: [ 309.658823] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jan 2 01:04:04 kernel: [ 309.658918] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jan 2 01:04:04 kernel: [ 309.675630] sda: sda1 sda2 Jan 2 01:04:04 kernel: [ 309.676440] sd 0:0:0:0: [sda] Attached SCSI disk Jan 2 01:04:05 kernel: [ 309.969102] ata2: SATA link down (SStatus 0 SControl 300) Jan 2 01:04:05 kernel: [ 310.281137] ata4: SATA link down (SStatus 0 SControl 300) Anybody have any additional ideas I could try? I am getting ready to just toss the motherboard.

  Read the article

• How to prevent screen locking when lid is closed?

  - by Joe Casadonte

  I have Ubuntu 11.10 with Gnome 3 (no Unity), gnome-screen-saver has been removed and replaced with xscreensaver. The screensaver stuff all works fine -- no complaints there. When I close my laptop lid, even for a second, the screen locks (and the dialog box asking for my password is xscreensaver's). I'd like for this not to happen... Things I've tried/looked at already: xscreensaver settings - the "Lock Screen After" checkbox is not checked (though I've also tried it checked and set to 720 minutes) gconf-editor - apps -> gnome-screensaver -> lock_enabled is not checked System Settings - Power - "When the lid is closed" is set to "Do nothing" for both battery and A/C System Settings - Screen - Lock is "off" gconf-editor - apps -> gnome-power-manager -> buttons -> lid_ac && lid_battery are both set to "nothing" dconf-editor - apps -> org -> gnome -> desktop -> screensaver -> lock_enabled is not checked Output from: gsettings list-recursively org.gnome.settings-daemon.plugins.power: org.gnome.settings-daemon.plugins.power active true org.gnome.settings-daemon.plugins.power button-hibernate 'hibernate' org.gnome.settings-daemon.plugins.power button-power 'suspend' org.gnome.settings-daemon.plugins.power button-sleep 'suspend' org.gnome.settings-daemon.plugins.power button-suspend 'suspend' org.gnome.settings-daemon.plugins.power critical-battery-action 'hibernate' org.gnome.settings-daemon.plugins.power idle-brightness 30 org.gnome.settings-daemon.plugins.power idle-dim-ac false org.gnome.settings-daemon.plugins.power idle-dim-battery true org.gnome.settings-daemon.plugins.power idle-dim-time 10 org.gnome.settings-daemon.plugins.power lid-close-ac-action 'nothing' org.gnome.settings-daemon.plugins.power lid-close-battery-action 'nothing' org.gnome.settings-daemon.plugins.power notify-perhaps-recall true org.gnome.settings-daemon.plugins.power percentage-action 2 org.gnome.settings-daemon.plugins.power percentage-critical 3 org.gnome.settings-daemon.plugins.power percentage-low 10 org.gnome.settings-daemon.plugins.power priority 1 org.gnome.settings-daemon.plugins.power sleep-display-ac 600 org.gnome.settings-daemon.plugins.power sleep-display-battery 600 org.gnome.settings-daemon.plugins.power sleep-inactive-ac false org.gnome.settings-daemon.plugins.power sleep-inactive-ac-timeout 0 org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type 'suspend' org.gnome.settings-daemon.plugins.power sleep-inactive-battery true org.gnome.settings-daemon.plugins.power sleep-inactive-battery-timeout 0 org.gnome.settings-daemon.plugins.power sleep-inactive-battery-type 'suspend' org.gnome.settings-daemon.plugins.power time-action 120 org.gnome.settings-daemon.plugins.power time-critical 300 org.gnome.settings-daemon.plugins.power time-low 1200 org.gnome.settings-daemon.plugins.power use-time-for-policy true gnome-settings-daemon is running: <~> $ ps -ef | grep gnome-settings-daemon 1000 1719 1645 0 19:37 ? 00:00:01 /usr/lib/gnome-settings-daemon/gnome-settings-daemon 1000 1726 1 0 19:37 ? 00:00:00 /usr/lib/gnome-settings-daemon/gsd-printer 1000 1774 1645 0 19:37 ? 00:00:00 /usr/lib/gnome-settings-daemon/gnome-fallback-mount-helper Anything else I can check? Thanks!

  Read the article

• CIFS - Default security mechanism requested (Mounted Share)

  - by André Faria

  The following message appear every time I reboot/boot my ubuntu 12.04.1 CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from nbtlm to ntlmv2 in kernel realese 3.3 I'am searching for a solution, if there is one for this message, I really don't understand it. Following my fstab //192.168.0.10/D$/ /mnt/winshare/ cifs user,file_mode=0777,dir_mode=0777,rw,gid=1000,credentials=/root/creds 0 0 I can use my mounted folder with no problem, I just want to know why this message is appearing and if have something that I can do to fix this problem or hide this warning. Thanks

  Read the article

• How can I install and use OBLogout?

  - by Uri Herrera

  OBLogout is a expandable, configurable, and theme-able logout script designed to be used in a Openbox desktop environment. This was taken from their Launchpad page, it was created to be used in Crunchabng Linux and I can find packages for Arch, Fedora and Debian but no information on how to Install it in Ubuntu, I can't find it in the repositories either and the only PPA is 3 years old. How can I install it and is there a possibility that it could work in other environments other than Openbox?

  Read the article

• Installation of LPRng (Ubuntu 13.04)

  - by Poulen

  I have problems with LPRng installation (I am linux beginner). http://lprng.com/LPRng-Reference/LPRng-Reference.html#INSTALLATION - installation guide http://lprng.com/PrintingCookbook/index.html#AEN1563 Could you write me here please, step by step, what I have to do (write into terminal) for succesful installation? I'm trying to do the first step of guide (h4: {4} % gunzip -c LPRng-.tgz | tar xvf -) but unsuccessfuly. (I put the source file to usr/bin, usr/sbin and usr/etc). I'm desperate, help me please :) Thank you and sorry for my english

  Read the article

• E: mkinitramfs failure cpio 141 gzip 1

  - by Nagaraj Shindagi

  I'm using Ubuntu 12.04 LTS with Dell power-edge R720 server, facing the problem when I apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 2 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up linux-image-3.2.0-37-generic-pae (3.2.0-37.58) ... Running depmod. update-initramfs: deferring update (hook will be called later) The link /initrd.img is a dangling linkto /boot/initrd.img-3.2.0-37-generic-pae Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-37-generic-pae /boot/vmlinuz-3.2.0-37-generic-pae update-initramfs: Generating /boot/initrd.img-3.2.0-37-generic-pae gzip: stdout: No space left on device E: mkinitramfs failure cpio 141 gzip 1 update-initramfs: failed for /boot/initrd.img-3.2.0-37-generic-pae with 1. run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1 Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-3.2.0 -37-generic-pae.postinst line 1010. dpkg: error processing linux-image-3.2.0-37-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 dpkg: dependency problems prevent configuration of linux-image-generic-pae: linux-image-generic-pae depends on linux-image-3.2.0-37-generic-pae; however: Package linux-image-3.2.0-37-generic-pae is not configured yet. dpkg: error processing linux-image-generic-pae (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup erro r from a previous failure. Errors were encountered while processing: linux-image-3.2.0-37-generic-pae linux-image-generic-pae E: Sub-process /usr/bin/dpkg returned an error code (1) ------------ even i tried with apt-get clean apt-get remove apt-get autoremove apt-get purge there is no difference it will show the same error message as above, even i checked the disk space ----------- Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda6 24030076 612456 22196964 3% / udev 16536644 4 16536640 1% /dev tmpfs 6618884 1164 6617720 1% /run none 5120 0 5120 0% /run/lock none 16547208 72 16547136 1% /run/shm cgroup 16547208 0 16547208 0% /sys/fs/cgroup /dev/sda1 93207 75034 13361 85% /boot /dev/sda10 9611492 1096076 8027176 13% /tmp /dev/sda12 9611492 226340 8896912 3% /opt /dev/sda13 9611492 152516 8970736 2% /srv /dev/sda7 9611492 592208 8531044 7% /home /dev/sda8 9611492 2656736 6466516 30% /usr /dev/sda9 9611492 696468 8426784 8% /var /dev/sda14 961237336 134563516 777845764 15% /usr/data /dev/sda15 618991384 84498388 503050052 15% /usr/data1 /dev/sda11 9611492 152616 8970636 2% /usr/local --------------- is there any problem on allotting the space to the partiations please let me know the solution its on urgent please help me on this issue regards

  Read the article

• Random touchpad and keyboard freezes on new installation

  - by ancaleth

  My touchpad and keyboard freeze up on my newly installed Ubuntu 10.10. They remain frozen until you shut down manually. No keys work, cursor doesn't move - it's like a screenshot. I was using Ubuntu 10.4 via wubi before on this Laptop where this problem never occurred. (I did not migrate wubi or upgrade to 10.10, it's a fresh start. 64-bit on Dell Studio, plenty of RAM, plenty of free space on partition etc.) I can't say there is a pattern yet, once it happened during the download of packages with the Update Manager, once it was just using Firefox, no other program running. In between these crashes the laptop was booted once, updates were installed etc., firefox was used and there weren't any problems. Both crashes should be in the attached kern.log and I noticed there were some error problems before the last crash (at the end, obviously). It seems the wireless was experiencing problems. This wasn't noticed on the user end, since the touchpad + keyboard were already frozen. kern.log: http://paste.ubuntu.com/552617/ How can the freezes be fixed? Edit: I will try Ctrl+Alt+F1 and then Ctrl+Alt+F7 when next freeze occurs, to see if it works again after this, as suggested here. But the keyboard seemed pretty frozen to me.

  Read the article

• Upgrading 13.04 to 13.10, could not calculate the upgrade

  - by topless

  I am running sudo update-manager -d and start the upgrade process. I select upgrade option and when then manager enters Setting new software channels it throws an error. Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade. This can be caused by: * Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu If none of this applies, then please report this bug using the command 'ubuntu-bug ubuntu-release-upgrader-core' in a terminal. I have disabled all unofficial and third party packages, I am not running a pre-release version since I am at 13.04 and I am trying to update to beta 2 which is not a pre-release. Before I fill a bug report, since its happening to both of my systems I would like to figure out if anyone else had same issues.

  Read the article

• Removing broken packages on distro update (13.04 to 13.10)

  - by user203974

  i'm kinda new to linux. last night i tried upgrading from 13.04 to 13.10 but i got the "could not calculate" error. i read this question and found this error in the main log: Dist-upgrade failed: 'E:Unable to correct problems, you have held broken packages.' and here's a list of my broken packages : Broken libwayland-client0:amd64 Conflicts on libwayland0 [ amd64 ] < 1.0.5-0ubuntu1 > ( libs ) (< 1.1.0) Broken libpam-systemd:amd64 Conflicts on libpam-xdg-support [ amd64 ] < 0.2-0ubuntu2 > ( admin ) Broken cups-filters:amd64 Conflicts on ghostscript-cups [ amd64 ] < 9.07~dfsg2-0ubuntu3.1 > ( text ) Broken libharfbuzz0a:amd64 Breaks on libharfbuzz0 [ amd64 ] < 0.9.13-1 > ( libs ) Broken libunity-scopes-json-def-desktop:amd64 Conflicts on libunity-common [ amd64 ] < 6.90.2daily13.04.05-0ubuntu1 > ( gnome ) (< 7.0.7) Broken libunity-scopes-json-def-desktop:amd64 Conflicts on libunity-common [ i386 ] < none > ( none ) (< 7.0.7) Broken libaccount-plugin-generic-oauth:amd64 Conflicts on account-plugin-generic-oauth [ amd64 ] < 0.10bzr13.03.26-0ubuntu1.1 > ( gnome ) (< 0.10bzr13.04.30) Broken libaccount-plugin-generic-oauth:amd64 Breaks on account-plugin-generic-oauth [ amd64 ] < 0.10bzr13.03.26-0ubuntu1.1 > ( gnome ) (< 0.10bzr13.04.30) Broken python3-aptdaemon.pkcompat:amd64 Breaks on libpackagekit-glib2-14 [ amd64 ] < 0.7.6-3ubuntu1 > ( libs ) (<= 0.7.6-4) Broken libsnmp-base:amd64 Breaks on libsnmp15 [ amd64 ] < 5.4.3~dfsg-2.7ubuntu1 > ( libs ) (< 5.7.2~dfsg-5) Broken libunity-core-6.0-8:amd64 Conflicts on unity-common [ amd64 ] < 7.0.0daily13.06.19~13.04-0ubuntu1 > ( gnome ) Broken python3-uno:amd64 Conflicts on python-uno [ amd64 ] < 1:4.0.4-0ubuntu1 > ( python ) Broken unity-scope-home:amd64 Conflicts on unity-lens-shopping [ amd64 ] < 6.8.0daily13.03.04-0ubuntu1 > ( gnome ) Broken xserver-xorg-video-mach64:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken usb-modeswitch-data:amd64 Breaks on usb-modeswitch [ amd64 ] < 1.2.3+repack0-1ubuntu3 > ( comm ) (< 1.2.6) Broken unity-gtk2-module:amd64 Conflicts on appmenu-gtk [ amd64 ] < 12.10.3daily13.04.03-0ubuntu1 > ( libs ) Broken xserver-xorg-video-intel:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-r128:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken unity-gtk3-module:amd64 Conflicts on appmenu-gtk3 [ amd64 ] < 12.10.3daily13.04.03-0ubuntu1 > ( libs ) Broken xserver-xorg-video-nouveau:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-cirrus:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken libbamf3-1:amd64 Depends on bamfdaemon [ amd64 ] < 0.4.0daily13.06.19~13.04-0ubuntu1 -> 0.5.1+13.10.20131011-0ubuntu1 > ( libs ) (= 0.4.0daily13.06.19~13.04-0ubuntu1) Broken bzr-gtk:amd64 Depends on bzr [ amd64 ] < 2.6.0~bzr6571-4ubuntu2 -> 2.6.0-3ubuntu1 > ( devel ) (< 2.6.0) Broken libgphoto2-6-dev:amd64 Conflicts on libgphoto2-2-dev [ amd64 ] < 2.4.14-2 > ( libdevel ) Broken activity-log-manager:amd64 Conflicts on activity-log-manager-common [ amd64 ] < 0.9.4-0ubuntu6.2 > ( utils ) Broken libgjs0d:amd64 Conflicts on libgjs0c [ amd64 ] < 1.34.0-0ubuntu1 > ( libs ) Broken libgtksourceview-3.0-0:amd64 Depends on libgtksourceview-3.0-common [ amd64 ] < 3.6.3-0ubuntu1 -> 3.8.2-0ubuntu1 > ( libs ) (< 3.7) Broken gnome-pie:amd64 Depends on libbamf3-1 [ amd64 ] < 0.4.0daily13.06.19~13.04-0ubuntu1 > ( libs ) Broken libunity-core-6.0-5:amd64 Depends on unity-services [ amd64 ] < 7.0.0daily13.06.19~13.04-0ubuntu1 -> 7.1.2+13.10.20131014.1-0ubuntu1 > ( gnome ) (= 7.0.0daily13.06.19~13.04-0ubuntu1) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-cirrus [ amd64 ] < 1:1.5.2+git20130108.e2bf5b25-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-intel [ amd64 ] < 2:2.99.904+git20131009.b9ad5b62-0ubuntu0sarvatt~raring > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-nouveau [ amd64 ] < 1:1.0.9+git20130730.300c5a32-0ubuntu0sarvatt~raring > ( x11 ) Broken xserver-xorg-video-ati:amd64 Depends on xserver-xorg-video-r128 [ amd64 ] < 6.9.1+git20130104.24f28a78-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-ati:amd64 Depends on xserver-xorg-video-mach64 [ amd64 ] < 6.9.4+git20130104.80e62cc1-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-mach64:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-intel:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-r128:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-nouveau:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-cirrus:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-cirrus [ amd64 ] < 1:1.5.2+git20130108.e2bf5b25-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-intel [ amd64 ] < 2:2.99.904+git20131009.b9ad5b62-0ubuntu0sarvatt~raring > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-nouveau [ amd64 ] < 1:1.0.9+git20130730.300c5a32-0ubuntu0sarvatt~raring > ( x11 ) Broken xserver-xorg-video-ati:amd64 Depends on xserver-xorg-video-r128 [ amd64 ] < 6.9.1+git20130104.24f28a78-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-ati:amd64 Depends on xserver-xorg-video-mach64 [ amd64 ] < 6.9.4+git20130104.80e62cc1-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-mach64:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-intel:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-r128:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-nouveau:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-cirrus:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-cirrus [ amd64 ] < 1:1.5.2+git20130108.e2bf5b25-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-ati:amd64 Depends on xserver-xorg-video-r128 [ amd64 ] < 6.9.1+git20130104.24f28a78-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-mach64:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-intel:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-r128:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-nouveau:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-cirrus:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-cirrus [ amd64 ] < 1:1.5.2+git20130108.e2bf5b25-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-intel [ amd64 ] < 2:2.99.904+git20131009.b9ad5b62-0ubuntu0sarvatt~raring > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-nouveau [ amd64 ] < 1:1.0.9+git20130730.300c5a32-0ubuntu0sarvatt~raring > ( x11 ) Broken xserver-xorg-video-ati:amd64 Depends on xserver-xorg-video-r128 [ amd64 ] < 6.9.1+git20130104.24f28a78-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-ati:amd64 Depends on xserver-xorg-video-mach64 [ amd64 ] < 6.9.4+git20130104.80e62cc1-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-mach64:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-intel:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-r128:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-nouveau:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-cirrus:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-cirrus [ amd64 ] < 1:1.5.2+git20130108.e2bf5b25-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-intel [ amd64 ] < 2:2.99.904+git20131009.b9ad5b62-0ubuntu0sarvatt~raring > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-nouveau [ amd64 ] < 1:1.0.9+git20130730.300c5a32-0ubuntu0sarvatt~raring > ( x11 ) Broken xserver-xorg-video-ati:amd64 Depends on xserver-xorg-video-r128 [ amd64 ] < 6.9.1+git20130104.24f28a78-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-ati:amd64 Depends on xserver-xorg-video-mach64 [ amd64 ] < 6.9.4+git20130104.80e62cc1-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-mach64:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-intel:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken libxi6:amd64 Breaks on xserver-xorg-core [ amd64 ] < 2:1.13.4~git20130508+server-1.13-branch.10c42f57-0ubuntu0ricotz~raring -> 2:1.14.3-3ubuntu2 > ( x11 ) (< 2:1.14) Broken xserver-xorg-video-ati:amd64 Depends on xserver-xorg-video-mach64 [ amd64 ] < 6.9.4+git20130104.80e62cc1-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-intel:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-r128:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-nouveau:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-cirrus:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-ati [ amd64 ] < 1:7.1.99+git20130730.6a278369-0ubuntu0sarvatt~raring -> 1:7.2.0-0ubuntu10 > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-cirrus [ amd64 ] < 1:1.5.2+git20130108.e2bf5b25-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-intel [ amd64 ] < 2:2.99.904+git20131009.b9ad5b62-0ubuntu0sarvatt~raring > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-nouveau [ amd64 ] < 1:1.0.9+git20130730.300c5a32-0ubuntu0sarvatt~raring > ( x11 ) Broken xserver-xorg-video-ati:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-ati [ amd64 ] < 1:7.1.99+git20130730.6a278369-0ubuntu0sarvatt~raring -> 1:7.2.0-0ubuntu10 > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-cirrus [ amd64 ] < 1:1.5.2+git20130108.e2bf5b25-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-intel [ amd64 ] < 2:2.99.904+git20131009.b9ad5b62-0ubuntu0sarvatt~raring > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-nouveau [ amd64 ] < 1:1.0.9+git20130730.300c5a32-0ubuntu0sarvatt~raring > ( x11 ) thats a lot of stuff ... do i have to remove them one by one ? will removing them caues any issue ? do i have to install them one by one again after the upgrade ?

  Read the article

• Ubuntu 12.04 installation never finishes

  - by Eric Carlsson

  I am trying to install Ubuntu 12.04 on an old Dell Latitude C400 laptop previously running windows XP using an Ubuntu install CD. The OS runs fine off the CD if a bit slow, and the installation starts off fine. However once the progress bar is filled I get put back to the desktop and nothing happens, first I assumed that the installation was completed but when I restarted the computer and booted from the hard drive nothing happened. I tried to install a few more times but the same thing happens. Am I doing something wrong? I do not get a error message or a installation complete notification. Is there any way I could get some kind of debug screen or log to see if something went wrong or at least follow the installation progress in more detail. Thanks for the help.

  Read the article

• Can't add repository due to 'missing' fingerprint

  - by cubsink

  I am trying to install nginx with php but when I am following a guide, like this one: http://www.justincarmony.com/blog/2011/10/24/setting-up-nginx-php-fpm-on-ubuntu-10-04/ I am always told to add that repository (sudo add-apt-repository ppa:brianmercer/php) but I can't. I'll just get "Error: can't find signing_key_fingerprint at https://launchpad.net/api/1.0/~nginx/+archive/php5" and when I go to that website I find that there is a fingerprint specified but still I get that error message. Is there anyway to specify it myself? And for the last thing, how I can fix this so I can continue my installation towards a working nginx enviroment with php. Thanks for your advice and better wisdom.

  Read the article

• How to fix phpMyadmin login?

  - by Ivan

  I've isnstalled phpMyAdmin with apt-get install phpmyadmin. When I open "http://localhost/phpmyadmin/", enter "root" as the user name and my MySQL root password and press go, then if I use Firefox, I get offered to download index.php file, if I use Opera 11, it says " Connection closed by remote server". What may the reason be and how to fix it? I use up-to-date Xubuntu 11.04. Reinstalling phpmyadmin did not help, neither did removing AppArmor.

  Read the article

• Microphone on a Dell Vostro 3360

  - by Pilb

  After upgrading my vostro 3360 on Ubuntu 12.04, I saw that drivers were not available for this version (notably for network). So I decided to install 11.10 but the mic still doesn't work (notably on Skype, Gtalk etc.) I join the model of the audio device and the drivers which were installed before I upgraded to ubuntu 12.04 (I succeeded only in installing the network one) Can you help me to find the solution to this problem with my microphone? Thanks , Pilb. Message in French : Bonjour, Après que je me sois rendu compte d'une anomalie dans la gestion du micro (sous Gtalk), j'ai essayé différentes solutions sans succès (1 2 et 3) Mon ordinateur dell vostro 3360 m'a été livré sous ubuntu 11.10, j'ai voulu le mettre sous 12.04 mais les drivers n'étaient pas compatibles. Je suis donc revenu sur Oneiric mais sans les drivers installés par Dell en usine. néanmoins, j'ai pris soin de noter leurs références (sans toutefois savoir si le micro fonctionne avec ces pilotes, mais cela me semble possible). Pourriez-vous me dire s'il est possible d'installer ces pilotes ? Ou alors si vous avez une solution concernant ce problème de micro ? Modèle de la carte son : Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) Alsa-hda-cirrus-oneiric driver in DKMS format (notamment) Dell-laptop-oneiric friver in DKMS format ethernet-alx oneiric driver in DKMS format Je vous remercie d'avance de votre aide et vous souhaite une bonne journée ! Pilb.

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >