Search Results

Search found 14873 results on 595 pages for 'hard drives'.

Page 72/595 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Can't access USB drive anymore

  - by marie

  I have a 32 GB Lacie Cookey USB flash disk that doesn't show in the Computer window but it's visible as a device. cmd > diskpart DISKPART> list disk Disk ### Status Size -------- ------------- ------ Disk 0 Online 149 G Disk 1 No Media 0 DISKPART> select disk 1 Disk 1 is now the selected disk. DISKPART> clean Virtual Disk Service error: There is no media in the device. It also appears in the Disk Management tool, but the box is empty. Is there anything I can do or is it dead? ............................................................ output from ChipGenius: Description: [F:]USB Mass Storage Device(LaCie CooKey) Device Type: Mass Storage Device Protocal Version: USB 2.00 Current Speed: High Speed Max Current: 200mA USB Device ID: VID = 059F PID = 103B Serial Number: 070535924B170C18 Device Vendor: LaCie Device Name: CooKey Device Revision: 0100 Manufacturer: LaCie Product Model: CooKey Product Revision: PMAP Controller Vendor: Phison Controller Part-Number: PS2251-67(PS2267) - F/W 06.08.53 [2012-09-26] Flash ID code: 983AA892 - Toshiba [TLC] Tools on web: http://dl.mydigit.net/special/up/phison.html

  Read the article

• Is my disk hot or not?

  - by adriangrigore

  I am trying to figure out the temperature of my dedicated server's harddisk. For this purpose, I've downloaded HDTune to monitor the S.M.A.R.T. Status. The problem is that the current temperature for "C2 Temperature" is 73 degrees celsius, but the little thermometer on top of the window shows 27 degrees celsius. See this screenshot: http://screencast.com/t/OGJhZGIxND Another monitoring software (Anfibia Reactor) shows similar behavior: Disk temperature is around 30 degrees, but it says that the disk is too hot. So, is my disk hot or not? Since this is a dedicated server, I can't just open the case and put a thumb on it.

  Read the article

• Building a PC for Work and play? [closed]

  - by Derek Organ

  Ok, Its been a long time since I build my own PC so I'm looking to get back into it again and build a new one. First off budget is about €800 excluding the monitor and windows 7 licence and mouse. (just bought a new g500) I plan on using my computer for work, lots of applications open at once but none particularly excessive (photoshop being the most demanding, mostly coding tools) I also use it for some gaming, e.g. COD, Starcraft etc. One thing I do want to do eventually is get a really good monitor with hight resolution and maybe 27" so the graphics card needs to be able to make best use of that. So a few questions 1) Is the bottle neck in performance mostly still the harddrives? 2) Aren't most processors e.g. i5 etc even i3 so far a head of other bottlenecks it makes litte difference the higher you go. Isn't the Graphics card dealing with heavy graphics so what really slows because of a slow CPU? So from this my thinking is to get a SSD drive as my primary drive for OS etc and have loads of memory e.g. 6-8GB and a decent mid level graphics card? It doesn't seem at my level worth spending much on CPU and any other parts really. I basic parts off the top of my head Case, Motherboard CPU SSD Drive SATA Drive Power Supply Memory Cooling (fan?) Graphics Card Network Card Keyboard DVD drive Mouse Windows Monitor Am I missing anything? Any helpful tips or general education much appreciated. Thanks, Derek

  Read the article

• Formatted C: from Windows 7 setup, now it won't even install

  - by ocurro

  Help, I'm so confused. I did more or less what's been described here: I formatted Vista and installed Windows 7 over it. Problem is that I'm now unable to boot (...) [1] I'm installing Seven on top of Vista on ACER AS1410 Notebook When it comes to the part where I choose where to install, I pick the partition labeled C: but instead of keeping windows.old files (what would I want them for?) I choose to go and carelessly format the partition (my bad). It shows me this error: Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information Now the only option is "Load Driver". i have tried installing every single one from ACER website, none of them are useful. I even flashed orig. BIOS. I've tried going back and choose "Repair" like in the picture:[2] but I only get an error: "Failed to save startup options" I think this is weird, what else can I do? [1] superuser.com/questions/117076/formatting-of-an-xp-vista-dual-boot-machine-now-unable-to-boot-up-xp [2] www.howtogeek.com/wp-content/uploads/2007/08/image51.png

  Read the article

• What's the easiest way to migrate one Mac OS X volume to another

  - by teabot

  I want to move a volume from a smaller drive to a larger unformatted one. What is the best way to achieve this? Ideally I'd like the new volume to have the same name as the older volume as it contains user accounts, and is a destination of various symlinks that I have on other volumes. Update: I used Carbon Copy Cloner in the end and it worked perfectly. I was able to simply rename the new volume in Finder to the same name as the old volume and then powered down and removed the old drive on which the volume lived. When I restarted, the new volume seamlessly worked in place of the old volume.

  Read the article

• High disk I/O - jbd2/sda2-8 process

  - by Evan Hamlet

  I have run a file server on a CentOS 5.8 final server. My only concern at the moment is what appears to be intermittent but continuous high disk I/O activity causing a general slowdown because of jbd2/sda2-8 process. jbd2/sda2-8 is making use of /dev/sda2, which is the 2nd partition of the first harddrive (IE: root partition). More info: using "iotop" the culprit appears to be "jbd2/sda1-8" making writes every second, which appears to be a kernel process associated with journaling on the ext4 filesystem, if my googling around is correct. I see "jbd2/sda2-8" appearing here every now and then, but certainly not every 3 seconds.. when idle, it appears about 1 or 2 times per minute. When I'm using the system, it appears more frequently. ATOP results: http://grabilla.com/02b14-8022db2e-4eb9-4f10-8e10-d65c49ad7530.png IOTOP results: http://grabilla.com/02b14-cf74b25d-4063-4447-9210-7d1b9b70e25b.png HTOP results: grabilla. com/02b14-ad8cad0e-89b0-46d3-849d-4fd515c1e690.png jbd2/sda2-8 is the processes I see with iotop making writes on disk even though it's not in use at all. Does someone has any idea how could I solve the high disk usage caused jbd2/sda2-8 process?

  Read the article

• Move drive from iomega home media nas to win 7 pc

  - by user41993

  My Iomega Home Media NAS would not boot, so I unscrewed the enclosure and removed the drive out. It's a 500 GB SATA drive that I plugged into my Win 7 PC so that I could backup the data. Windows does recognize it (it's there in disk management) but I can't assign a letter to it in order to access it. The only option available is Delete Volume... which I obviously don't want to do :) How can I accomplish getting the data off that drive? Thanks.

  Read the article

• Move drive from iomega home media nas to win 7 pc

  - by user41993

  My Iomega Home Media NAS would not boot, so I unscrewed the enclosure and removed the drive out. It's a 500 GB SATA drive that I plugged into my Win 7 PC so that I could backup the data. Windows does recognize it (it's there in disk management) but I can't assign a letter to it in order to access it. The only option available is Delete Volume... which I obviously don't want to do :) How can I accomplish getting the data off that drive? Thanks.

  Read the article

• Linux Development System Layout.Configuration

  - by tom smith

  Hi. Looking to create a linux based development/test system. I'm the only one using it. Will be using a variant of rhel/centos/fedora, with a 640G drive, and an external 250G as a kind of backup. Looking for thoughts/comments on the layout/config of the drive for the install/creation process. My primary goal is to be able to "backup"/restore the work product so i'd like OS to be separate from everything else. Thoughts/commnents/ponters appreciated. Thanks

  Read the article

• Why can't I boot in to Windows Recovery Environment to fix my HDD or salvage my data?

  - by Kevin

  I've been trying to get in to WindowsRE to salvage the files on my Sony Vaio laptop after it failed to load Vista (it finally, consistently displays "Error loading operating system" after months of such intermittent failures, usually rectified via restarts or utilizing Startup Repair or CHKDSK from WindowsRE) . The problem is, after successfully accessing it once after this failure (and many times before over the course of the laptop's life), I can no longer get it to load. During the last successful access (right after the failure), I ran startup repair, which itself failed and notified me that the boot sector was corrupt. I attempted to head in to Sony's proprietary recovery tools menu, which is accessible from WindowsRE when it is loaded from the recovery partition or recovery disk, however it hung. I have since been unable to access the recovery environment after restarting, using any of these methods: Access via the recovery partition (pressing F10 on boot) Access via recovery DVD (created using the same computer when it was healthy) Access via a Windows Vista installation DVD All three methods produce the same results: The computer acknowledges the boot attempt The computer successfully gets passed the "Windows is loading files" screen The computer successfully gets passed the Windows loading screen The computer then stalls at a black screen, while showing HDD activity (via indicator light). After a few minutes, the HDD activity ceases, and after a few more minutes, the over sized cursor that is utilized in WindowsRE appears on the black screen. The actual recovery environment, however, never appears, even after leaving the computer in such a state overnight. What is fustrating is that other bootable utilities, such as SeaTools for DOS and MemTest, boot up and run fine. In running perfectly normally, MemTest was able to produce a plethora of errors utilizing my RAM. I'm inclined to believe the RAM's faultiness may causing the WindowsRE booting to fail. Would this be a valid assumption? If I'm not mistaken, booting from external media utilizes the RAM, so such a reason is plausible, assuming my knowledge of bootloading is correct. Other than that, I can't figure out any reason why all the bootable utilities except WindowsRE run fine. Does anyone know what the problem is, or could be? Any solutions?

  Read the article

• How to hide a partition?

  - by snark

  I bought a small 32 GB SSD to store the operating system (Windows 7) and my applications. I'll copy the existing boot partition (30 GB) from my harddisk (WD Velociraptor) to the SSD using GParted but I'd like to keep the existing partition intact (keeping all data on it) so I can go back to it if there is a problem with the SSD. How can I hide the partition so it is not visible anymore to Windows? What should I change with GParted? Second question: how can I keep the harddisk partition synced with the SSD so I have a backup? I'm looking for a near real-time solution (not something like Acronis Drive Image).

  Read the article

• Is StoreJet Transcend (0x2329) an Advanced Format drive?

  - by Graham Perrin

  I use a 640 GB StoreJet Transcend (0x2329) with ZEVO Community Edition 1.1.1 on OS X 10.8.2. Question Is this drive Advanced Format? Background I submitted a request for technical support to Transcend but the first response was gibberish so I don't expect a reasonable follow-up. Models at http://www.transcend-info.com/Products/CatList.asp?LangNo=0&ModNo=293 are similar but different sizes (not 640 GB). Mine is probably 25M2 (TS640GSJ25M2): Unless I'm missing something, nothing currently in the Transcend support area tells me whether the drive is Advanced Format. From System Information in OS X 10.8.2: StoreJet Transcend: Capacity: 640.14 GB (640,135,028,736 bytes) Removable Media: Yes Detachable Drive: Yes BSD Name: disk3 Product ID: 0x2329 Vendor ID: 0x152d (JMicron Technology Corp.) Version: 0.00 Serial Number: 322549FBA004 Speed: Up to 480 Mb/sec Manufacturer: JMicron History for the ZFS pool shows creation in March 2012 –  macbookpro08-centrim:~ gjp22$ zpool history zhandy | grep create 2012-03-14.17:29:37 zpool create -f -O compression=off -O copies=1 -O casesensitivity=insensitive -O snapdir=visible zhandy /dev/dsk/GPTE_1928482A-7FE4-482D-B692-3EC6B03159BA 2012-06-22.15:51:16 zfs create zhandy/Pocket Time Machine At that time I almost certainly used ZEVO Setup Assistant to create the pool. macbookpro08-centrim:~ gjp22$ zpool get ashift zhandy NAME PROPERTY VALUE SOURCE zhandy ashift 0 default If I discover that the drive is Advanced Format, a different ashift value will be appropriate.

  Read the article

• What's the best way to partition an SSD?

  - by Sander Rijken

  In case you're creating one partition, should it be as big as possible, or should a certain percentage of space be left unpartitioned?

  Read the article

• External USB HD issues with a twist (works on Windows7 but not XP)

  - by Eruditass

  I have this older external USB HD, 160 GB. I was using it to copy my Steam games to another computer. On the source computer, Windows 7 64-bit, everything worked fine. Drive reported no errors, had no hiccups, etc. Plugging it into the Windows XP 32-bit computer, it worked fine for looking through the files, moving files around on it (no real reading/writing, just modifying the filesystem table). However, when copying files from it to my internal HD, after a couple seconds to tens of minutes (seemingly random times), the USB device becomes unrecognized and it reports a delayed write error. Events in system log go like this, chronologically: (number times displayed)xSource (Event ID): "message" 2xdisk (51): An error was detected on device \Device\Harddisk1\D during a paging operation. 1xftdisk (57): The system failed to flush data to the transaction log. Corruption may occur. 1xApplication popup (26): Windows - Delayed Write Failed : Windows was unable to save all the data for the file E:\$Mft. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. 1xntfs (50): {Delayed Write Failed} Windows was unable to save all the data for the file . The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. These repeat for a while, then there is 10+ disk messages or ftdisk messages. Other notes: This occurs on random files at random times. This problem cannot be replicated on the Windows 7 source machine when copying from the HD to a different location on its local disk chkdsk /f was run and found no errors. chkdsk /f/r has the delayed write issue. drive was set to quick removal. Setting to performance in device manager yielded same result I am not writing anything to the USB external drive, so I am not sure why there is even a delayed write error (writing file access times?) local Windows XP was chkdsk'd without problems Windows XP machine has no problems with other USB HD's Various USB ports were attempted Rebooting did not help Occurs with SyncToy as well as windows explorer SMART status is good on both local drive and the external one Lack of gaming is making me cranky

  Read the article

• SATA 3 PCIe Controller working with decreased performance (slower than SATA 2)

  - by V M

  After reading this question about maxing out an SSD I decided to do so myself. My mobo only supports SATA 2 and has two PCIe 2.0 x1 connectors (which promiss up to 500 mb/s). So after some searching I decided to go with this controller from amazon. My Samsung magician benchmark before upgrade (running SATA 2): Now after installing the controller all of the benchmark scores are lower (even though the Samsung Magician app confirms its connected to a SATA 3 port): What can I do to remedy this? Any help is appreciated.

  Read the article

• Help installing fedora13 from DvD?

  - by user38008

  I have windows xp on my dell but I lost the drivers disk so I want to install linux Fedora 13 instead and wipe the windows xp. I burned the iso to a dvd and loaded up the live session user and used "Install to harddrive" but when I get to the partitioning window there is no harddrives to install to so I cant overwrite the windows drive (/C:).. Help?

  Read the article

• HDD from Mid-2009 MacBook Pro works OUTSIDE laptop, but not INSIDE.

  - by Jaime

  Leading up to the problem: I was working late one night on a Keynote presentation. My battery ran out, and the computer did that hibernation thing it does when there's no battery power. I got my charger, connected it to my computer, and then pushed the power button. It started up for a second in to the gray screen it usually goes to. Then I turned around, tugging the magsafe charger out of the connector on the computer. This caused my computer to shut down again. Now I can't get it to boot at all -- just a blinking folder icon with a question mark in it on boot up. I've tried pretty much everything to deal with this. Multiple forced reboots, resetting PRAM and NVRAM, etc. I booted to original OSX disc and ran disc utility, but I discovered that there is no disc to boot to. I ran the Apple Hardware Test, and it came back 100% good. I booted to an Ubuntu live-boot disc and ran that disc utility, just to see if it recognized a disc at all. It didn't. So I removed the HDD, and replaced it with a bootable volume running BSD. It didn't recognize that HDD either. I then attached my HDD to my computer via an external enclosure with a USB interface. Lo and behold, it booted! So my computer now only work with my HDD attached externally. This means that the HDD is functional. And the AHT returns no hardware malfunctions. So what the hell is going on? … In the meantime: I've put the HDD back into the computer but it still doesn't do anything at all (I'm running it externally right now). I just checked the serial number and my 1 year warranty expired recently, so I can't send it back for repair. … Little Help Thoughts? I've been searching everywhere for leads, but no luck. …

  Read the article

• How can I recover XFS partitions from a formatted HD?

  - by giuprivite

  I deleted the partition table of my HD. I wanted to format another one, but by mistake, I formatted the wrong one. Then I also created some new partition on it. Now I would like, if possible, to recover my old data. The old configuration was this: A primary NTFS partition with Windows, and a secondary partition with four logical partitions: a swap and three XFS partitions (two for Ubuntu and OpenSuSE, and one with the home for both systems). This is the output I get when I run gpart in a terminal: ubuntu@ubuntu:~$ sudo gpart /dev/sdb Begin scan... Possible partition(Windows NT/W2K FS), size(39997mb), offset(0mb) Possible extended partition at offset(39997mb) Possible partition(Linux swap), size(8189mb), offset(39997mb) Possible partition(SGI XFS filesystem), size(40942mb), offset(48187mb) Possible partition(SGI XFS filesystem), size(40942mb), offset(89149mb) Possible partition(SGI XFS filesystem), size(175044mb), offset(130112mb) End scan. Checking partitions... Partition(OS/2 HPFS, NTFS, QNX or Advanced UNIX): primary Partition(Linux swap or Solaris/x86): logical Partition(Linux ext2 filesystem): logical Partition(Linux ext2 filesystem): orphaned logical Partition(Linux ext2 filesystem): orphaned logical Ok. Guessed primary partition table: Primary partition(1) type: 007(0x07)(OS/2 HPFS, NTFS, QNX or Advanced UNIX) size: 39997mb #s(81915360) s(63-81915422) chs: (0/1/1)-(1023/254/63)d (0/1/1)-(5098/254/51)r Primary partition(2) type: 015(0x0F)(Extended DOS, LBA) size: 265245mb #s(543221849) s(81915435-625137283) chs: (1023/254/63)-(1023/254/63)d (5099/0/1)-(38912/254/2)r Primary partition(3) type: 000(0x00)(unused) size: 0mb #s(0) s(0-0) chs: (0/0/0)-(0/0/0)d (0/0/0)-(0/0/0)r Primary partition(4) type: 000(0x00)(unused) size: 0mb #s(0) s(0-0) chs: (0/0/0)-(0/0/0)d (0/0/0)-(0/0/0)r Looking the first eight lines, it seems the data are still there... but I don't know how to recover them. I have a free second HD of about 500 GB (the formatted one is 320 GB) that I can use for the recovery process.

  Read the article

• Moving Bootcamp partition to another drive

  - by Xster

  Hi, I don't know how sketch this is. I currently have Bootcamp with Windows 7 on my internal along with my Snow Leopard. I'm moving to a bigger harddrive. I'm reinstalling Snow Leopard but I would like to keep my Bootcamp. How do I migrate the data from one drive to another? Any suggestions? I'm not willing to spend money on this

  Read the article

• Windows 7 Image Restore with a smaller hard drive

  - by Vaccano

  I have a 500 GB drive that I have made a system image of. I would like to move that to a 250 GB drive (because it is a Solid State drive). I have made a Windows 7 Backup Image of my 500 GB drive. I am currently only using 163 GB of that drive. Can I just restore that to the target drive or will the restore be expecting a 500 GB drive? If it is expecting it I can shrink my partition to less that 250 and backup again. But I would rather not if that is not needed. Will the restore realize that it is not using all the space and just take what it needs?

  Read the article

• IE8 Refuses to run Javascript from Local Hard Drive

  - by Josh Stodola

  I have a problem that just started at work recently and the network manager is certain he did not change anything with the group policy. Anyways, here is a detailed description of the problem. My machine is Windows XP SP3, and I use IE8 to browse. We have McAffee anti-virus software that I am unable to configure. I use the following file to test... <!DOCTYPE html> <html> <head> <title>Javascript Test</title> </head> <body> <script type="text/javascript"> document.write("<h1>PASS</h1>"); </script> <noscript> <h1>FAIL</h1> </noscript> </body> </html> When I open this file from the C: drive, it fails every time. If I execute it anywhere else (local/remote web server or on a mapped network drive), it works just fine. When I am simply browsing the Internet, Javascript on web sites works just fine. It is only failing on files running from my C: drive. Additionally, I have had a couple other programmers in the department try this file on their C: drive, and it works fine for them. So I don't believe it is a group policy thing. I need to fix this because I do extensive testing from my C: drive, and I am accustomed to doing so. I don't want to get into the habit of moving files to a different drive just to test. Things I have tried: Enabled "Allow Active Content to Run Files on My Computer" in Options | Advanced | Security Enabled "Allow Active Scripting" in Options | Security | Custom Level Verified that "Script" was not checked as disabled in Developer Toolbar Added localhost to Trusted Sites in Options Disabled McAffee completely (momentarily, with help from network admin) Used an older DOCTYPE in my test HTML page Re-installed IE8 completely Ran regsvr32 on the JScript.dll Slammed keyboard I am sure that there is a setting somewhere that will fix this problem, possibly in the registry. I would not be surprised if it was related to the developer toolbar. At this point I do not know where else to look. Can anyone help me resolve this problem? EDIT: Regardless of the bounty, this issue is still ongoing.

  Read the article

• BIOS setting: AHCI or RAID (when using SSD + 2x HDD in RAID-0)

  - by nixdagibts

  Hello there, I want to add a new SSD and use it as system drive with Win7 x64 installed. As driver I chose newest Intel Rapid Storage driver (not MSAHCI). I know that I have to use AHCI as BIOS setting for optimal SSD read/write performance. But I'm also using 2 normal HDDs as separate RAID-0 SSD: Win7 HDD: RAID-0 HDD: RAID-0 If I set my BIOS on my ASUS P5W DH Deluxe to AHCI, my RAID-0 cant be recognized And If im using RAID as setting, maybe my SSD has not its top speed. But I'm not sure about that. In short: AHCI no RAID-0 RAID no optimal SSD performance (?) Now my question: Can I use RAID as BIOS setting and be sure, that theres no decrease in SSD performance? Google finds so many articles with similar topics and my head is just exploding. Two examples: - set AHCI and after installing OS switch to RAID as BIOS setting... what? - use a diskette and F6 while installing win7... really? O.o I thought those times are gone

  Read the article

• Preparing a new physical system with VMWare

  - by Max

  I need to create a new installation of Windows, but at the same time I need this computer. So I decided to create a new physical disk from within VMWare, install windows/drivers/software and then just replace the HDD in the computer. I've bought a new HDD, split it into two partions and installed Windows 7 using the VMWare's ability to use phusical disks. I can see the windows files and directories that have been created on this partition, but when I'm replacing the HDD in the host machine it cannot boot from it. Why is that? Is it at all possible to create a bootable physical disk with VMWare or I should create a virtual disk and then use some HDD imaging tool to copy the HDD image to a physical disk? Maybe there's a better way of installing a new system and working on the computer at the same time?

  Read the article

• best data+partition recovery software

  - by Pennf0lio

  I accidentally formatted my Drive D that contained all my Backups and Documents. I separated my files to my Drive D hoping I will not harm my files. Since I use Acronis Recovery to Install a new OS with some pre-installed application to my HDD I didn't realize I also formated/erase my Drive D. Now my drive D is unpartitioned. I am really in really in deep trouble and would need some urgent help, Please recommend a Software that at least can restore my Old Drive that contained my files. I'm assuming most of you think this is a duplicate of some old questions here, But I'm not looking for data recovery, I need to recover the whole partition with the files. I used to use "Recuva" but It only recovers files not the whole folders with the files in it. Please advice. Thank You!

  Read the article

• How to do a hexdump of first track of HDD?

  - by Daniel Gratz

  How would i do a hexdump in Ubuntu for the first track of a HDD? I am looking for a winhex-esque output if that makes sense. The first track has 63 sectors, each 512 bytes long. I tried dd if=/dev/sda bs=1 count=512 | hexdump -C but that only gave me what appears to be the MBR, or first sector of the HDD. I guess i am confused about what bs and count should be. Bs means how many bytes to display and count is how many multiples of bs? Thanks!

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >