Search Results

Search found 12918 results on 517 pages for 'hard turner'.

Page 72/517 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Can I mix drive types in an HP server?

  - by Generic Error

  I currently have the following setup: HP DL380 G4 Server 6 x 73GB, Ultra160, 10k, SCSI 80 Pin Drives Smart Array 6i Controller RAID 5 One of the drives is failing and needs to be replaced. I have on hand drives that are the same size and type, but are Ultra320, 15k instead. I have verified that these drives work in another system with the same type of drive controller. When I plug one of these in the system simply reports the drive as being offline and has nothing further to do with it. From what I have read these drives should be compatable. Should this work at all and if so, what might be preventing it?

  Read the article

• What is the best SSD deal available right now ?

  - by paulgreg

  What is the best 2.5" SSD deal (best performance for a reasonable price and a good size) available right now ? The question is in 'community wiki' mode, so feel free to post the "winner" below : And the winner is... : currently the OCZ Vertex. Prices: * 30GB - $149.99 * 60GB - $239.99 * 120GB - $389.00 * 250GB - $829.00 Speed: * Read: up to 270MBps * Write: up to 210MBps

  Read the article

• Is a 1TB drive too big for a boot drive?

  - by CT

  Can the drive you choose to boot off affect performance? Would I receive faster boot/shutdown times if I were to choose a smaller drive? How would partitions affect performance/boot speed? Assuming all drives are the same RPM, lets say 7200.

  Read the article

• maximum number of sectors per track

  - by Phenom

  If you know the media transfer rate, how do you calculate the maximum number of sectors per track?

  Read the article

• Windows 8 "ate" 100GB of my SSD

  - by Eleeist

  Yesterday I've done a completely fresh Windows 8 Pro install on brand new Samsung SSD. I recall that just after the installation Windows was taking about 10GB. I've installed all the updates and when today I entered My Computer I've almost got a heart attack: disk C: 12.3 GB free of 118 GB! The file explorer, when I enter the disk highlight everything and go to Properties, tells me that the files in there take only 22.5 GB of space which seems reasonable. So where is my 100 GB?

  Read the article

• Safest snapshot of a failing harddrive?

  - by ironfroggy

  I have a headless machine that stopped booting, so I pulled it out for diagnostics and got a message that one of the harddrives was about to fail, so I pulled them all out and I need to get everything off, before figuring out which I need to get rid of. I wasn't sure which drive was failing, because it only said "Harddrive 1" and I don't know which it referred to. I'm wondering the best way to get everything off. I'm worried if I copy everything, I could get corrupt data and not realize some files are wrong until the drive is completely out of commission. What are my best options to get everything off in a way I can safely move to new storage?

  Read the article

• HDDs randomly falling off raid

  - by michael

  I really need help on this it's Saturday long weekend.No customer service help:( .I recently build new server/light duty desktop.Main purpose is only file sharing.Raid configuration :Adaptec 6805 ,8x 3TB HDD WD Red,Intel RES2SV240 expander,Raid 6,set in Intel mobo DZ 77GA-70K.I upgraded firmwares, but I'm having strange problem. During Build Verify segment 7 got missing.I just reinsert drive into hot swap bay and it started to rebuild Array.After rebuild was done another segments 0 and 5 gone missing while build/verify.I reinserted drives and now I'm praying that raid is going to rebuild successfully from remaining 6 drives,because i already transfer some data on it(I know it was bad idea).I checked S.M.A.R.T on missing drives , it only says link failure and aborted commands on one of them.No Errors on HDDs.Connections and cables are good.I added 2 fans blowing on RAID controller because it was getting too hot, so I guess overheating shouldn't be issue.What can be possibly wrong? Thank you for help.

  Read the article

• Why do SSD drives get so much more expensive as they get larger?

  - by futuraprime

  Normal HDD costs go up very little as drives get larger. For example, an average 1TB drive costs a little under $90, 2TB costs a little over $100, and a 3TB drive costs close to $150. For HDDs, the cost per GB goes down as the number of GB goes up. SSD costs don't work like this: a 128GB SSD goes for $120ish, 256GB goes for $250ish, and 512GB drives get up to $600. The cost per GB goes up as the number of GB rises. What is it about SSDs that makes them so much costlier as they get larger?

  Read the article

• Three disk (possibly RAID) data recovery

  - by Martin

  I have on my desk three 160 GB disks that were once part of an HP Proliant Windows 2003 Server. They may have been part of a RAID configuration of some sort. They may or may not be damaged in some way. When I interface them via USB, one of them shows up as a drive, but unformatted. The others show up as uninitialized disks in manager. An alternative explanation is that the two drives were simply not unused. What's my first step? I've recovered data off damaged drives before but never had anything to do with RAID configs. How can I even tell if any type of RAID was used?

  Read the article

• Truecrypt rescue usb

  - by geekbutitsokk

  i have found tutorials on their official forum and on the internet about how to make a truecrypt rescue bootable usb stick. I'm guessing anyone who can answer will know what that is already, but it is basically just a way to boot into the system using a usb stick instead of a DVD. But the only problem is all of these tutorials involve using Grub4Dos, and i cannot run Grub4Dos on 64 bit windows 7. Is there any other alternative method? Thanks!

  Read the article

• External HDD connecting via USB disconnects wireless LAN connection

  - by Kensai

  Strange problem. I have this MEDION Akoya PC that has a dedicated bay to slide an external HDD sold separately. It's very handy indeed cause the slot is providing a fast USB 3 connection and power to the HDD unit, without extra cables. All works fine except this show-stopper behavior to disconnect me from the router once I slide in the unit and it powers up. The moment I connect the unit the (normally) three-four WiFi connections I see in my neighborhood disappear and my own to the router loses its signal strength (no Internet traffic is possible). After a while it throws me off that one as well, never to connect me again as long as the unit is powered. Once I disconnect the HDD the various signals come back and it automatically reconnects to my own. What takes? Are we in front of a serious design fault by MEDION here? Does the spinning of the HDD on top of the PC cause electromagnetic interference strong enough to throw off my WiFi connectivity? Is it a simple USB problem? Some kind of strange hardware conflict? Where should I look?

  Read the article

• Windows XP drives not opening

  - by SpiXel

  I had a PC which operating system was Windows XP , I reinstalled the Windows , formatting just the C drive , and had my new version of XP installed there , but when it was installed and I tried to open the other drives (meaning for example D , E , .. ) I got this error : i9wjpqc.exe has encountered a problem and needs to close I trying googling it , and I ended up with knowing it's a malware, so my guess is that my previous OS had this malware on its other drives and the source was located in C , now that I've formatted C , other drives still have the malware, so they can't be opened :( and suggestion to get the drives to open ?

  Read the article

• Question about getting information off an old HD...

  - by user37983

  Ok so my old cpu was a sony vaio. its kinda old and had xp on it. My gf thrashed it - the cd drive went and she tried fixing it by messing with the configurations bios etc. the actual laptop is really fried the keyboard doesnt work, etc. However the harddrive is still intact. I tried putting the HD in my new cpu (toshiba runnig win7) and it looks like its gonna boot up it goes to the screen with the logo and the status bar starts to load. then it flashes a blue screen for a split second, and goes to the black screen where it says windows did not shut down properly and gives options to (start windows normally, safe mode, safe mode with networking, safe mode with prompts) ive tried every option but it always goes back to this screen. I need to get into the hd cuz i have very important files. is there anyway?

  Read the article

• How to fix windows 7 boot process

  - by MasterCorban

  Ok so i used xp for years before i was able to get my hands on the Windows7 RC which i bought a new HDD for, and then followed the process to dual-boot. About a month ago xp started acting funny and i thought the disk might be dying. So i started using Windows7 all the time. Today i start the computer and it cant find the disk which xp was on anymore. I guess its dead. So i remove the xp HD and my computer cant start...insert bootable disk or something similar So how can i remove the primary(dead) xp disk and boot straight to Windows 7?

  Read the article

• where is my disk space?

  - by user166241

  I recently had a problem with .xsession-errors file - it became very big ( 90GB) and took all disk space: How I can check what takes disk space in /tmp?. I cleaned it with command > .xsession-errors but after an hour it became large again. So I deleted it (rm .xsession-errors) - it helped because it wasn't recreated but again after hour disk space disappeared - now there is no .xsession-errors anymore but I don't know where is the memory: df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 106640456 101223392 4 100% / udev 8166744 8 8166736 1% /dev tmpfs 3270224 972 3269252 1% /run none 5120 0 5120 0% /run/lock none 8175552 152 8175400 1% /run/shm du -sc * .[^.]* | sort -n 0 initrd.img 0 initrd.img.old 0 proc 0 sys 0 vmlinuz 0 vmlinuz.old 4 cdrom 4 lib64 4 media 4 mnt 4 selinux 8 dev 12 srv 16 lost+found 68 tmp 1124 run 3396 lib32 5164 .rpmdb 5540 root 8888 sbin 9120 bin 17132 etc 106080 opt 116956 boot 861908 lib 3530584 usr 3821836 var 13371260 home 21859112 total So there is around 100GB used but executing du -sc * .[^.]* | sort -n in root directory finds only ~21 GB - so what takes 80GB?? How to check it? I suspect that when I deleted the `.xsession-errors' file the errors were redirected somwhere else - but where?

  Read the article

• Hard Reset USB in Ubuntu 10.04

  - by Cory

  I have a USB device (a modem) that is really finicky. Sometimes it works fine, but other times it refuses to connect. The only solution I have found to fix it once it gets into a bad state is to physically unplug the device and plug it back in. However, I don't always have physical access to the machine it is plugged in on, so I'm looking for a way to do this through the command line. This post suggests running: $ sudo modprobe -w -r usb_storage; sudo modprobe usb_storage However I get an "unknown option -w" output. This slightly modified command: $ sudo modprobe -r usb_storage Fails with the message FATAL: Module usb_storage is in use. If I try to kill -9 the processes marked [usb-storage] before running they refuse to die (I think because they are deeply tied to the kernel). Anyone know of a way to do this? NOTE: I cross-posted this on serverfault as I didn't know which was more appropriate. I will delete and/or link whichever one is answered first.

  Read the article

• What Filesystem should be used for a 4TB drive for both Windows and OSX compatibility? [closed]

  - by Nicholas Yost

  Note: I am aware of similar questions. The one's I seen here are for Windows, OSX, and Linux (which I do not need). I also can use Mountain Lion, which the other questions did not mention. I was going to use NTFS, but OSX Mountain Lion can only read that filesystem and not write to it for some reason. I want to use something native between OSX and Windows, as I don't want to risk losing the data over filesystem incompatibilities. I have USB 3.0 and want something that will allow files greater than 4GB. I do not mind installing a small set of drivers on the Windows machine(s), but I would strongly prefer to leave the Mac machine untouched. Thanks!

  Read the article

• Hot-swapping drives

  - by user57770

  I have hot swap drives and controllers, but have never actually used the hot swap capability. What is the procedure for doing so? Do I need to warn Linux that I'm about to pull a drive out? Should I do anything after I put a drive back in? Does it make a difference whether the drive is part of a RAID set? The drives are generally RAIDed, but not always. Any RAID sets are managed by Linux, rather than the controller. The machines are running Fedora and CentOS.

  Read the article

• I want to reformat my external hard disk but disk utility said it could not be unmounted

  - by Faith

  Hi I wanted to reformat my HP 500GB hard disk to MS DOS (FAT) by using Disk Utility but Disk Utility kept saying that the hard disk cannot be unmounted. I tried googling it but nothing seems to answer my question. I'm not trying to reformat the hard disk in my Mac but my external hard disk! I usually format my hard disks to clear the documents I no longer need. And I'll change it to ExFat but currently, whenever I plug in my hard disk on Windows, the whole system just hangs there. Can someone help??

  Read the article

• My laptop keeps hard resetting

  - by cgoddard

  I have had this laptop for a long time (five years at least) and it hasn't had the best treatment over the years. But over the last few months, it has been randomly completely shutting down, no blue screening, no steady shutdown, just black screen, then BIOS. I think it might be happening as I do a save, but cant be sure, but recently it has been getting very annoying. I did initially think it was an overheating issue, but the speed that it comes back online is staggeringly fast for it to have cooled down sufficiently. plus it has got incredibly hot before with no issue (since its been doing this). Does anyone know what might be going on? Dell Inspiron 640m, running Windows 7.

  Read the article

• Disk (EXT4) suddenly empty without any sign of why

  - by Ohnomydisk

  I have a Ubuntu 10.04 server with several disks in it. The disks are setup with a union filesystem, which presents them all as one logical /home. A few days ago, one of the disks appears to have suddenly 'become empty', for lack of better explanation. The amount of data on the /home mount almost halved within minutes - the disk appears to have had just over 400 GB of data prior to 'becoming empty'. I have absolutely no idea what happened. I was not using the server at the other time, but there are half a dozen other users who may have been (without root access and without the ability to hose a whole disk). I've ran SMART tests on the disk and it comes back clean. The filesystem checks fine (it has 12 GB used now, as some user software continued downloading after the incident). All I know is that around around midnight on October 19, the disk usage changed dramatically: The data points are every 15 minutes, and the full loss occured between captures: 2012-10-18 23:58:03.399647 - has 953.97/2059.07 GB [46.33 percent] 2012-10-19 00:13:15.909010 - has 515.18/2059.07 GB [25.02 percent] Other than that, I have not much to go off :-( I know that: There's nothing interesting in log files at that time Nobody appeared to be logged in via SSH at the time it occured (most users do not even use SSH) The server was online through whatever occured (3 months uptime) None of the other disks were affected and everything else on the server looks completely normal I have tried using "extundelete" on the disk and it didn't really find anything (some temporary files, but they looked new anyway) I am completely at a loss to what could have caused this. I was initially thinking maybe root escalation exploit, but even if someone did maliciously "rm" the disk contents, it would take more than 15 minutes for 400 GB?

  Read the article

• Sync two external harddrives?

  - by acidzombie24

  A little mishap happened earlier today and i am thinking i should have a copy of my external harddrive since 10% of it is very valuable. What is the best solution to keep two external harddrive in sync? i'll probably use one as regular and maybe use the other only to copy data. The easiest way to keep it in sync is to clear one drive and copy the other but 1T of data will take a long time. Whats a good existing app that will keep them in sync? freeware preferred.

  Read the article

• I suspect that my HDD is causing hardlocks, as all other components have been replaced. How can I check this theory and solve the potential cause?

  - by user867814

  I have had this problem over quite a while now, thorough multiple Linux kernel versions and distributions, as well as replacement of all components, aside from my main HDD - RAM, GPU(twice), mother board, CPU, power supply. What happens is, at one point during the operation of the PC, it will hardlock - everything stops working, external HDD is not shut down correctly and continues to spin until I plug it out and in, there are no system/kernel logs of any kind, and no otherwise nothing that would suggest a cause. Another reason for my suspicion is that the failures happen almost exclusively during HDD read/write activity - shutdown(happens nearly 1/3 of the time so far, it's only been few days though), launching programs, and once during operation of apt. I hope the post is descriptive enough, if you need any additional info, ask(and tell me how to prepare/obtain it), and I will provide. If I'm wrong, point me in the right direction. Thanks in advance.

  Read the article

• USB Permission - Write protection

  - by dekhadmai

  I have an external harddisk and my friends asked for it. The point is I don't trust in his anti-virus software. Is there anyway to allow some folders (I prepare hdd space for him) to write-able and all others is read-only ? or is there a software that can do like this ? And it would be great if I can have full access on my computer ONLY (may be with some specific software on my PC) and without having to modify anything. I don't ask for hdd-encryption since I only want to limit the area of write-able folder (and allow my friend to read through all my data), later I can scan for virus myself only in that area ... scanning entire hdd with 500gb/friend is not fun at all ! Sorry if this doesn't seems like the programming questions. Any help would be appreciate, Thank you.

  Read the article

• Matched or unmatched drives for RAID arrays?

  - by Will

  Looking around there is conflciting information on this, with some strongly suggesting one or the other. From my understanding the issue with matched drives is that the wear on both drives is more or less the same, so the potential for the second drive failing with or very soon after the first is pretty high. People also claim matched drives give substianatally higher performance however assuming the unmatched drives are more or less the same (eg 2, 1 TB STATA II 7200rpm drives with 32MB cache), would the minor differences between say a Seagate and a Western Digital one (say one has a 128MB/s read rate, and the other a 150MB/s read rate, as well as I guess various other minor differences) actually cause any notable performance loss, ie potentialy worse than two matched 128MB/s drives, or does RAID not really care and give you essentially an optimal solution (eg upto 278MB/s total read speed for RAID 0 and 1) and similar for other RAID with more "unmatched" drives (5 and 1+0 come to mind as possibilities)? Also I couldnt find much info on how this is different on different RAID setups, eg RAID 0 or RAID 1, software or hardware RAID, etc. I'm assuming such things have an effect, and thats it's not all the same for RAID in general?

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >