Search Results

Search found 6235 results on 250 pages for 'hdd low'.

Page 72/250 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

  • WIN7 constant BSOD 0x7B on boot, not producing any dump files where to go from here?

    - by prayingpantis
    So my one win 7 pc has been getting a BSOD on boot (roughly a sec after load screen starts) after a power failure. The complete stop code is 0x0000007B (0x80786B58, 0xC0000034,0x00000000,0x00000000) I've searched for quite a while now on the net and it seems like most people gave up after gettting 0x7B and no dump files. What I've tried so far: startup repair - reports it cannot repair computer automatically. BadPatch is reported somewhere in a problem signature contained in the problem details. startup repair with a WIN 7 CD - also fails, I can't recall what the error was, but it was not the same as the error produced with the start up tool shipped with the version of WIN 7 installed on my machine (I think the text had something ACL-ish contained in it) used a boot disk (Hiren's boot iso) - I used it to enable the CrashDump registry key and then after BSOD, read the HDD's dump locations but it was empty. Note, I'm quite sure the registry keys I edited are the correct ones, since the reboot on BSOD option was enabled by default and after I changed the regkey controlling this functionalitty to 0 the BSOD stayed after I booted again. check disk - works and returns no problems, also it seems I'm able to access all my files on the HDD. mem test - works and returns no errors So I'm not sure what else I can do to figure out what is the problem here. I read somewhere that you can use WINDBG to remote debug another PC, but I'm not sure if this is possible since the OS isn't even loaded yet? Also the last driver change I made on the system was installing a video driver, but I had no problems with it and were able to reboot several times until the power outage happened and the BSOD appeared. Any help or guidance for a way to DEBUG this problem would really be appreciated (I'm not really that keen to try a whole bunch of random fixes, I'd rather try and narrow down the problem first).

    Read the article

  • Hard Disk based storage library

    - by Ryan M.
    We have a Tandberg T24 tape device to handle all of our long term backups right now. We decided that we're not backing up nearly everything that we would like to and that we still have a lot of vulnerabilities. To get to where we want to be, we're going to have to back up a lot more servers than we're currently doing. All of our internal servers have some sort of directly attached drive (I.e. LaCie Raid box or a simple portable hard drive) doing backups, but what we want to do is get those backups off-site. The current tape drive is directly attached via SCSI to a Windows Server 2008 File Server. So to back up anything to tape, it has to be funneled through the File Server. With the current increase that we have planned, I don't think that funneling everything through the File Server is the right course of action and I'm thinking that maybe a second backup device would be more appropriate. I would like your input on a couple of ideas. 1) Doing HDD instead of tape. Tape is hard to deal with. We have a regular rotation cycle, so they don't need years and years of shelf life, so I'm wondering if something HDD-based would be better. 2) Something accessible over the network. Instead of having the device directly attached to one specific machine, have it available to all the servers over the network. Our File Server is a 12-disk raid 6 set up.. I was thinking something like that, but with no raid involved, all disks are stand alone so they can be used/installed/removed on an individual basis. Does any such thing exist? Thanks for your ideas. I'm really interested to hear about some of the solutions you guys are using..

    Read the article

  • Can I clone my hard drive to an external and boot from the clone?

    - by willbuntu
    First thing: I am not asking what software I'm supposed to use. I already know the answer: Ghost (proprietary), Clonezilla, and dd (if I'm careful). What I really want to know is if it is possible to (essentially) bit-for-bit clone my entire installation (OS, installed software, activation(s), etc.) to an external USB hard-drive, and then boot off of that (if I need to, I know how to edit BIOS settings and use Plop boot manager), and work with it day-to-day as if there was virtually no difference from using my internal HDD now. Again, I'm not asking how to install Windows to an external (because I know I'd need to do some special workaround), I'm asking if I can clone everything and boot off of it. In case you're wondering why I'm going to this trouble: I'm using a Lenovo Essentials laptop that has an unmodifiable partition table (due to recovery crap), and has all 4 of its partitions spoken for (3 primary, one extended, cannot change the extended). Anyway, my thought is that if I can clone everything and boot off of it when I need to, and just have a Linux distro on the internal HDD, then that could work.

    Read the article

  • Windows won't boot after moving house. How do I solve this?

    - by James
    Ive just moved house and tried to set up my desktop after packing it away and now when I power it on, the BIOS boots up and no errors are found but when my computer tires to boot into Windows 7 a continuous fast beeping sound is made and a black screen is displayed. What I've done so far: Reset to UEFI defauts Played about with RAM, I had 4*4 GB sticks, I took all of them out to test for a mobo error which I have and now im only using 1 stick of 4 GB. Changed my GPU, I tok my gtx580 out and now im using the onboard Intel 3000 graphics driver, the BIOS and uefi are correctly displaying so I no longer think its a GPU based error. Ive check all of the connections and nothing seems to be loose. My HDD setup is: 2 128 GB SSD's in Raid 0 as my main C drive (possibly cause of error?) 1 1 TB Games drive 1 2 TB Data Drive Ive also got a blueray drive connected. After searching the internet im pretty much out of suggestions but im currently downloading a live CD to see if it will boot and if I can access some files on my HDD.

    Read the article

  • How to fix Truecrypt MBR using Command Prompt or Linux live USB?

    - by Michal Stefanow
    I was playing with TrueCrypt and decided to make a fresh installation of Windows 7 from USB stick. Unfortunately Windows 7 installer: "setup was unable to create a new system partition" My entire HDD has been formatted and is visible as 320GB unallocated space, but no fdisk nor Windows 7 installer nor Windows XP installer could help. (Windows XP doesn't even see the HDD, it sees only USB stick and says "not enough space to install") It may be related to Truecrypt and pre-boot authentification, boot loader and/or MBR. As I don't have optical device I could not have created rescue disk. Right now I need a rescue of some kind, supposingly by erasing/fixing MBR using Linux live USB or using Command Promt. Another approach is to click "repair your comuter" menu from Windows 7 installer then click "restore your computer", then click OK upon error and get access to Command Prompt. Yet another another approach is to start computer without Linux USB I receive this: error:unknown filesystem. grub rescue> Any help would be greatly appreciated as my laptop is kind of not fully operational now. UPDATE: This was asked long time ago, ended up formatting everything (eventually it worked using different bootable USB)...

    Read the article

  • Connect USB hard drive to wireless router on RJ45 port? Possible?

    - by lawphotog
    just a quick story behind. I was trying to set up wireless networked hard drive at home. My wireless router doesn't take USB. I am considering few options. First i was considering to get something like WD My Cloud. My router is an old one provided by service provider. It only has 10/100 Ethernet. WD My Cloud has Gigabit interface. So unless i changed a new router, data transfer will be slow. So upgrading the router is a must if i want fast transfer speed. Plus I already own an external hard drive with USB 3.0 interface. So if I get a router like Netgear D6300, i can get a decent speed wireless shared drive at home. And i can use my existing HDD instead of WD My Cloud. But the router isn't cheap so I am saving up for that. In the meantime I found out the existence of USB to RJ45 adaptor. I read the reviews and some say it works for them and for some don't. They didn't really say what they were trying to do so I'm confused. So if i bought an adaptor like this, can i connect my existing HDD (USB) with my existing router (RJ45) and use it as a shared drive for data transfer? I know it will be slow as the adaptor will only have USB 2.0 and 10/100 for Ethernet. But it's fine as it's for temporary until i got my new router.

    Read the article

  • Advice on cloning disk

    - by hks
    I'm going to buy a second disk for backup, the same size as my laptops. I want to mount it in a casing via usb and backup an entire hdd every soemtime. That's because I want the posibility to just switch drives in case of something goes wrong. I'm using Linux and obviously the right tool seems to be dd. The thing is that my laptop drive has a speed of around 50-70 MB/s and usb 2.0 is 57 MB/s. So to copy my 250GB disk should take me more than 1 hour if I'm lucky. I can't wait this much. I want some differential backup. I read one of JWZ articles. In it he gives more details for using rsync on Mac. He writes that there is possibility of making rsync'ed disk bootable. So my question is: how to make rsync'ed hdd bootable under Linux or are there other 'quick backup' tools for Linux that would allow me to just swap drives? Or should I just stick to dd :( ?

    Read the article

  • Partitioning of Ubuntu server which will use OpenVZ and encrypted partitions (unlocked through SSH l

    - by DeletedAccount
    Hi, I'm about to install a server. Some context: My HDD is 1 TB and I have 2 GB RAM Ubuntu Server Lucid Lynx AMD 64 I will use OpenVZ and have most functionality separated into containers. To support disk quotas I need to use ext3 (not ext4) for the container partition. Each time I reboot the server I want to be forced to login through SSH and mount the encrypted partitions by typing my password (if someone steals the server, no critical data should be available). I want to have as much as possible encrypted. Yet I want to be able to login through SSH as I don't have a monitor or keyboard at the server. I am not sure how big I need my partitions to be. Being able to resize them later would be nice. I guess it implies using LVM? But the manual partition mount using SSH is also very important (in fact it's more important, if I have to pick one). How do you recommend that I partition the HDD? If I have daemons which needs the encrypted partitions, will they fail and can I just restart them after mounting the needed partitions?

    Read the article

  • Windows xp blinking under score after bios

    - by heyjoe
    so this is for an older pc I have to repair for a friend. The pc has an hdd of about 60 something gb, It uses win xp and let's say 60-70% of the boots it hangs on showing only an underscore bilking line after bios screen, rest of the times it boots fine or the computer shuts down on xp loading screen. Sometimes if you let it alone while the underscore is blinking, it will boot after a while, like a few minutes, some times it won't boot at all even if you give him more time, like one hour. When it boots successfully the pc seems to work fine. I think it's a bad hard disk and i'm about to suggest buying a new one and switching it but I don't have enough experience and i would hate making him buy a new hdd and not solving the problem. anyone has any tips? I know there are other topics about blinking underscores or cursors while xp is booting but the issues about the pc shutting itself down or sometimes booting really freaks me out. Can't format everything and re install until about 10 days from now, cause the dude has some program for his business on this pc and I have to migrate it when the next computer arrives, however he needs to use it until then. so please advise, thx.

    Read the article

  • How To Completely Move Users/Program Files/Program Files (x86)/ProgramData (Folders) To Another Partition(s) On Windows 8?

    - by Enigma83
    I am attempting to move folders Users Program Files Program Files (x86), ProgramData (at the root of the C drive) to at least 2 other partitions, preferably on a fresh install. I have read that there are methods for doing this post-install, but it seems like it would be a bit more tedious to do things that way. I want to move the 2 Program Files folders to another partition on the same HDD, and Users/ProgramData will go to yet another partition on same HDD. I have done a bit of research on this, read up on some things that involved booting into Audit Mode, using the RoboCopy command to copy folders via booting into my Windows 8 USB drive, creating NTFS junctions/symbolic links, Registry edits, as well as accomplishing this automatically by creating an auto-attend file which Windows Setup processes automatically before the user is ever booted in for the 1st time. I tried this morning and now have a basic installation in which programs like Internet Explorer fail to open, certain files can't be found/opened (even if I click on them directly), an example is Regedit. Also, I can't run the Command/DOS (CMD) prompt as Administrator (or otherwise, as any other user), can't activate the real Administrator account or open any of the Administrative Tools (despite having added them to my Start Screen). So far I have only tried RoboCopy-ing Program Files and Program Files (x86) so far, creating junction points for them, and editing the Registry in the relevant locations. This is what I'm left with now. I also found the following blog article which describes how to do this for Windows 7 So, where should I go from here and where can I find more information? And how can this be done without disabling the Metro apps, which I've read will stop working if you move ProgramData. Once I have everything moved, where do I install programs to? Do I tell them to install to C:\Program Files\Program Files (x86) or to the junctioned/symbolic-linked partition/drive? I plan to test in VMware virtual machines from here on until things are working correctly, while using a baseline default install for daily tasks.

    Read the article

  • My PC suddenly reboots

    - by ChocoDeveloper
    Yesterday I opened my PC hub (after like, 5 years) to add more RAM and a new HDD. It was full of dust and balls of fluff, so I cleaned it a bit by blowing. I also removed the fan that was attached to the motherboard (I think it's there to cool the processor) and I cleaned it also by blowing and with a paintbrush, then put it back where it was (it had 4 weird plastic screws, it wasn't easy). Then I added 2 x 2Gib of RAM (Kingston 1333MHz), and the new HDD (Western Digital Caviar Blue 1TB SATA 3). I couldn't find another wire like the one my first disk had, which was thicker, but there was one that was more flat, so I plugged it and it worked fine (I also plugged the wire that I think is for the data, which looks like many little wires glued together). I'm running Ubuntu 12.04, and in the new disk I've just installed Windows 7. Between yesterday and today, two reboots ocurred while working on Ubuntu. I haven't used Windows 7 that much so I don't know if it will happen there too. So where can I begin to debug this?

    Read the article

  • DevConnections Session Slides, Samples and Links

    - by Rick Strahl
    Finally coming up for air this week, after catching up with being on the road for the better part of three weeks. Here are my slides, samples and links for my four DevConnections Session two weeks ago in Vegas. I ended up doing one extra un-prepared for session on WebAPI and AJAX, as some of the speakers were either delayed or unable to make it at all to Vegas due to Sandy's mayhem. It was pretty hectic in the speaker room as Erik (our event coordinator extrodinaire) was scrambling to fill session slots with speakers :-). Surprisingly it didn't feel like the storm affected attendance drastically though, but I guess it's hard to tell without actual numbers. The conference was a lot of fun - it's been a while since I've been speaking at one of these larger conferences. I'd been taking a hiatus, and I forgot how much I enjoy actually giving talks. Preparing - well not  quite so much, especially since I ended up essentially preparing or completely rewriting for all three of these talks and I was stressing out a bit as I was sick the week before the conference and didn't get as much time to prepare as I wanted to. But - as always seems to be the case - it all worked out, but I guess those that attended have to be the judge of that… It was great to catch up with my speaker friends as well - man I feel out of touch. I got to spend a bunch of time with Dan Wahlin, Ward Bell, Julie Lerman and for about 10 minutes even got to catch up with the ever so busy Michele Bustamante. Lots of great technical discussions including a fun and heated REST controversy with Ward and Howard Dierking. There were also a number of great discussions with attendees, describing how they're using the technologies touched in my talks in live applications. I got some great ideas from some of these and I wish there would have been more opportunities for these kinds of discussions. One thing I miss at these Vegas events though is some sort of coherent event where attendees and speakers get to mingle. These Vegas conferences are just like "go to sessions, then go out and PARTY on the town" - it's Vegas after all! But I think that it's always nice to have at least one evening event where everybody gets to hang out together and trade stories and geek talk. Overall there didn't seem to be much opportunity for that beyond lunch or the small and short exhibit hall events which it seemed not many people actually went to. Anyways, a good time was had. I hope those of you that came to my sessions learned something useful. There were lots of great questions and discussions after the sessions - always appreciate hearing the real life scenarios that people deal with in relation to the abstracted scenarios in sessions. Here are the Session abstracts, a few comments and the links for downloading slides and  samples. It's not quite like being there, but I hope this stuff turns out to be useful to some of you. I'll be following up a couple of these sessions with white papers in the following weeks. Enjoy. ASP.NET Architecture: How ASP.NET Works at the Low Level Abstract:Interested in how ASP.NET works at a low level? ASP.NET is extremely powerful and flexible technology, but it's easy to forget about the core framework that underlies the higher level technologies like ASP.NET MVC, WebForms, WebPages, Web Services that we deal with on a day to day basis. The ASP.NET core drives all the higher level handlers and frameworks layered on top of it and with the core power comes some complexity in the form of a very rich object model that controls the flow of a request through the ASP.NET pipeline from Windows HTTP services down to the application level. To take full advantage of it, it helps to understand the underlying architecture and model. This session discusses the architecture of ASP.NET along with a number of useful tidbits that you can use for building and debugging your ASP.NET applications more efficiently. We look at overall architecture, how requests flow from the IIS (7 and later) Web Server to the ASP.NET runtime into HTTP handlers, modules and filters and finally into high-level handlers like MVC, Web Forms or Web API. Focus of this session is on the low-level aspects on the ASP.NET runtime, with examples that demonstrate the bootstrapping of ASP.NET, threading models, how Application Domains are used, startup bootstrapping, how configuration files are applied and how all of this relates to the applications you write either using low-level tools like HTTP handlers and modules or high-level pages or services sitting at the top of the ASP.NET runtime processing chain. Comments:I was surprised to see so many people show up for this session - especially since it was the last session on the last day and a short 1 hour session to boot. The room was packed and it was to see so many people interested the abstracts of architecture of ASP.NET beyond the immediate high level application needs. Lots of great questions in this talk as well - I only wish this session would have been the full hour 15 minutes as we just a little short of getting through the main material (didn't make it to Filters and Error handling). I haven't done this session in a long time and I had to pretty much re-figure all the system internals having to do with the ASP.NET bootstrapping in light for the changes that came with IIS 7 and later. The last time I did this talk was with IIS6, I guess it's been a while. I love doing this session, mainly because in my mind the core of ASP.NET overall is so cleanly designed to provide maximum flexibility without compromising performance that has clearly stood the test of time in the 10 years or so that .NET has been around. While there are a lot of moving parts, the technology is easy to manage once you understand the core components and the core model hasn't changed much even while the underlying architecture that drives has been almost completely revamped especially with the introduction of IIS 7 and later. Download Samples and Slides   Introduction to using jQuery with ASP.NET Abstract:In this session you'll learn how to take advantage of jQuery in your ASP.NET applications. Starting with an overview of jQuery client features via many short and fun examples, you'll find out about core features like the power of selectors for document element selection, manipulating these elements with jQuery's wrapped set methods in a browser independent way, how to hook up and handle events easily and generally apply concepts of unobtrusive JavaScript principles to client scripting. The second half of the session then delves into jQuery's AJAX features and several different ways how you can interact with ASP.NET on the server. You'll see examples of using ASP.NET MVC for serving HTML and JSON AJAX content, as well as using the new ASP.NET Web API to serve JSON and hypermedia content. You'll also see examples of client side templating/databinding with Handlebars and Knockout. Comments:This session was in a monster of a room and to my surprise it was nearly packed, given that this was a 100 level session. I can see that it's a good idea to continue to do intro sessions to jQuery as there appeared to be quite a number of folks who had not worked much with jQuery yet and who most likely could greatly benefit from using it. Seemed seemed to me the session got more than a few people excited to going if they hadn't yet :-).  Anyway I just love doing this session because it's mostly live coding and highly interactive - not many sessions that I can build things up from scratch and iterate on in an hour. jQuery makes that easy though. Resources: Slides and Code Samples Introduction to jQuery White Paper Introduction to ASP.NET Web API   Hosting the Razor Scripting Engine in Your Own Applications Abstract:The Razor Engine used in ASP.NET MVC and ASP.NET Web Pages is a free-standing scripting engine that can be disassociated from these Web-specific implementations and can be used in your own applications. Razor allows for a powerful mix of code and text rendering that makes it a wonderful tool for any sort of text generation, from creating HTML output in non-Web applications, to rendering mail merge-like functionality, to code generation for developer tools and even as a plug-in scripting engine. In this session, we'll look at the components that make up the Razor engine and how you can bootstrap it in your own applications to hook up templating. You'll find out how to create custom templates and manage Razor requests that can be pre-compiled, detecting page changes and act in ways similar to a full runtime. We look at ways that you can pass data into the engine and retrieve both the rendered output as well as result values in a package that makes it easy to plug Razor into your own applications. Comments:That this session was picked was a bit of a surprise to me, since it's a bit of a niche topic. Even more of a surprise was that during the session quite a few people who attended had actually used Razor externally and were there to find out more about how the process works and how to extend it. In the session I talk a bit about a custom Razor hosting implementation (Westwind.RazorHosting) and drilled into the various components required to build a custom Razor Hosting engine and a runtime around it. This sessions was a bit of a chore to prepare for as there are lots of technical implementation details that needed to be dealt with and squeezing that into an hour 15 is a bit tight (and that aren't addressed even by some of the wrapper libraries that exist). Found out though that there's quite a bit of interest in using a templating engine outside of web applications, or often side by side with the HTML output generated by frameworks like MVC or WebForms. An extra fun part of this session was that this was my first session and when I went to set up I realized I forgot my mini-DVI to VGA adapter cable to plug into the projector in my room - 6 minutes before the session was about to start. So I ended up sprinting the half a mile + back to my room - and back at a full sprint. I managed to be back only a couple of minutes late, but when I started I was out of breath for the first 10 minutes or so, while trying to talk. Musta sounded a bit funny as I was trying to not gasp too much :-) Resources: Slides and Code Samples Westwind.RazorHosting GitHub Project Original RazorHosting Blog Post   Introduction to ASP.NET Web API for AJAX Applications Abstract:WebAPI provides a new framework for creating REST based APIs, but it can also act as a backend to typical AJAX operations. This session covers the core features of Web API as it relates to typical AJAX application development. We’ll cover content-negotiation, routing and a variety of output generation options as well as managing data updates from the client in the context of a small Single Page Application style Web app. Finally we’ll look at some of the extensibility features in WebAPI to customize and extend Web API in a number and useful useful ways. Comments:This session was a fill in for session slots not filled due MIA speakers stranded by Sandy. I had samples from my previous Web API article so decided to go ahead and put together a session from it. Given that I spent only a couple of hours preparing and putting slides together I was glad it turned out as it did - kind of just ran itself by way of the examples I guess as well as nice audience interactions and questions. Lots of interest - and also some confusion about when Web API makes sense. Both this session and the jQuery session ended up getting a ton of questions about when to use Web API vs. MVC, whether it would make sense to switch to Web API for all AJAX backend work etc. In my opinion there's no need to jump to Web API for existing applications that already have a good AJAX foundation. Web API is awesome for real externally consumed APIs and clearly defined application AJAX APIs. For typical application level AJAX calls, it's still a good idea, but ASP.NET MVC can serve most if not all of that functionality just as well. There's no need to abandon MVC (or even ASP.NET AJAX or third party AJAX backends) just to move to Web API. For new projects Web API probably makes good sense for isolation of AJAX calls, but it really depends on how the application is set up. In some cases sharing business logic between the HTML and AJAX interfaces with a single MVC API can be cleaner than creating two completely separate code paths to serve essentially the same business logic. Resources: Slides and Code Samples Sample Code on GitHub Introduction to ASP.NET Web API White Paper© Rick Strahl, West Wind Technologies, 2005-2012Posted in Conferences  ASP.NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • QLogic QLE8152 won't link up with a fiber loop

    - by Mike Pennington
    I have a Dell R710 running Debian Linux 6.0 (Squeeze). I installed a QLogic QLE8152 CNA in the PCI-E riser today and I have been trying to get the CNA's ethernet layer to come up after I put a fiber loop on it; I also scoped it with a light meter, and the SFP+ transceiver is getting the correct amount of light. The whole time I have been working on this problem, the lights on the CNA are blinking green at a rate of about 1 flash every 3 seconds. When I plug the fiber into a Juniper EX4500 10GE in a rack next to it, the Juniper's link stays down as well. I have to confess that this is my first wrangling with a CNA, so perhaps I'm doing something fundamentally wrong, but here is what I have found so far... First the basics... [mpenning@Finger ~]$ uname -a Linux Finger 2.6.32-5-amd64 #1 SMP Mon Oct 3 03:59:20 UTC 2011 x86_64 GNU/Linux [mpenning@Finger ~]$ cat /etc/issue Debian GNU/Linux 6.0 \n \l [mpenning@Finger ~]$ lspci -v shows that the card is properly installed (physically) 04:00.0 Ethernet controller: QLogic Corp. 10GbE Converged Network Adapter (TCP/IP Networking) (rev 02) Subsystem: QLogic Corp. Device 017e Flags: bus master, fast devsel, latency 0, IRQ 34 I/O ports at e000 [size=256] Memory at df8f0000 (64-bit, non-prefetchable) [size=16K] Memory at df900000 (64-bit, non-prefetchable) [size=1M] Expansion ROM at df800000 [disabled] [size=256K] Capabilities: [44] Power Management version 3 Capabilities: [4c] Express Endpoint, MSI 00 Capabilities: [88] MSI: Enable- Count=1/32 Maskable- 64bit+ Capabilities: [98] Vital Product Data Capabilities: [a0] MSI-X: Enable+ Count=8 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [138] Device Serial Number 00-c0-dd-ff-fe-1c-53-b4 Capabilities: [144] Power Budgeting <?> Kernel driver in use: qlge The output from ethtool shows that eth4 is the QLE8152... [mpenning@Finger ~]$ sudo ethtool eth4 Settings for eth4: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supports auto-negotiation: No Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: FIBRE PHYAD: 0 Transceiver: external Auto-negotiation: on Current message level: 0x000060f7 (24823) Link detected: no [mpenning@Finger ~]$ sudo ethtool -i eth4 driver: qlge version: v1.00.00-b3 firmware-version: v1.35.11 bus-info: 0000:04:00.0 [mpenning@Finger ~]$ Finally, I tried modprobe -r qlge; modprobe -r qla2xxx and then modprobe qla2xxx; modprobe qlge to kick the system again... I don't see a smoking gun in /var/log/messages... Nov 17 19:46:21 finger kernel: [ 6212.298275] qlge 0000:04:00.1: PCI INT B disabled Nov 17 19:46:22 finger kernel: [ 6213.779974] qlge 0000:04:00.0: PCI INT A disabled Nov 17 19:46:33 finger kernel: [ 6224.554074] qla2xxx 0000:04:00.3: PCI INT D disabled Nov 17 19:46:33 finger kernel: [ 6224.555322] qla2xxx 0000:04:00.2: PCI INT C disabled Nov 17 19:46:54 finger kernel: [ 6245.625854] QLogic Fibre Channel HBA Driver: 8.03.01-k6 Nov 17 19:46:54 finger kernel: [ 6245.625888] qla2xxx 0000:04:00.2: PCI INT C -> GSI 35 (level, low) -> IRQ 35 Nov 17 19:46:54 finger kernel: [ 6245.626837] qla2xxx 0000:04:00.2: MSI-X vector count: 7 Nov 17 19:46:54 finger kernel: [ 6245.626841] qla2xxx 0000:04:00.2: Found an ISP8001, irq 35, iobase 0xffffc90012664000 Nov 17 19:46:54 finger kernel: [ 6245.627113] qla2xxx 0000:04:00.2: Configuring PCI space... Nov 17 19:46:54 finger kernel: [ 6245.639429] qla2xxx 0000:04:00.2: Configure NVRAM parameters... Nov 17 19:46:54 finger kernel: [ 6245.642597] qla2xxx 0000:04:00.2: Verifying loaded RISC code... Nov 17 19:46:54 finger kernel: [ 6245.642708] qla2xxx 0000:04:00.2: FW: Loading from flash (a0000)... Nov 17 19:46:55 finger kernel: [ 6246.273340] qla2xxx 0000:04:00.2: Allocated (64 KB) for FCE... Nov 17 19:46:55 finger kernel: [ 6246.273401] qla2xxx 0000:04:00.2: Allocated (64 KB) for EFT... Nov 17 19:46:55 finger kernel: [ 6246.273486] qla2xxx 0000:04:00.2: Allocated (1350 KB) for firmware dump... Nov 17 19:46:55 finger kernel: [ 6246.273856] scsi9 : qla2xxx Nov 17 19:46:55 finger kernel: [ 6246.274631] qla2xxx 0000:04:00.2: Nov 17 19:46:55 finger kernel: [ 6246.274633] QLogic Fibre Channel HBA Driver: 8.03.01-k6 Nov 17 19:46:55 finger kernel: [ 6246.274634] QLogic QLE8152 - QLogic PCI-Express Dual Channel 10GbE CNA Nov 17 19:46:55 finger kernel: [ 6246.274636] ISP8001: PCIe (5.0GT/s x4) @ 0000:04:00.2 hdma+, host#=9, fw=5.01.04 (8d4) Nov 17 19:46:55 finger kernel: [ 6246.274666] qla2xxx 0000:04:00.3: PCI INT D -> GSI 37 (level, low) -> IRQ 37 Nov 17 19:46:55 finger kernel: [ 6246.274748] qla2xxx 0000:04:00.3: MSI-X vector count: 7 Nov 17 19:46:55 finger kernel: [ 6246.274751] qla2xxx 0000:04:00.3: Found an ISP8001, irq 37, iobase 0xffffc900125c4000 Nov 17 19:46:55 finger kernel: [ 6246.275098] qla2xxx 0000:04:00.3: Configuring PCI space... Nov 17 19:46:55 finger kernel: [ 6246.287329] qla2xxx 0000:04:00.3: Configure NVRAM parameters... Nov 17 19:46:55 finger kernel: [ 6246.290624] qla2xxx 0000:04:00.3: Verifying loaded RISC code... Nov 17 19:46:55 finger kernel: [ 6246.290736] qla2xxx 0000:04:00.3: FW: Loading from flash (a0000)... Nov 17 19:46:55 finger kernel: [ 6246.920204] qla2xxx 0000:04:00.3: Allocated (64 KB) for FCE... Nov 17 19:46:55 finger kernel: [ 6246.920264] qla2xxx 0000:04:00.3: Allocated (64 KB) for EFT... Nov 17 19:46:55 finger kernel: [ 6246.920345] qla2xxx 0000:04:00.3: Allocated (1350 KB) for firmware dump... Nov 17 19:46:55 finger kernel: [ 6246.920749] scsi10 : qla2xxx Nov 17 19:46:55 finger kernel: [ 6246.921715] qla2xxx 0000:04:00.3: Nov 17 19:46:55 finger kernel: [ 6246.921716] QLogic Fibre Channel HBA Driver: 8.03.01-k6 Nov 17 19:46:55 finger kernel: [ 6246.921717] QLogic QLE8152 - QLogic PCI-Express Dual Channel 10GbE CNA Nov 17 19:46:55 finger kernel: [ 6246.921719] ISP8001: PCIe (5.0GT/s x4) @ 0000:04:00.3 hdma+, host#=10, fw=5.01.04 (8d4) Nov 17 19:46:58 finger kernel: [ 6249.519911] qlge 0000:04:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34 Nov 17 19:46:58 finger kernel: [ 6249.533970] qlge 0000:04:00.0: QLogic 10 Gigabit PCI-E Ethernet Driver Nov 17 19:46:58 finger kernel: [ 6249.533975] qlge 0000:04:00.0: Driver name: qlge, Version: v1.00.00-b3. Nov 17 19:46:58 finger kernel: [ 6249.534856] qlge 0000:04:00.0: ql_display_dev_info: Function #0, Port 0, NIC Roll 0, NIC Rev = 1, XG Roll = 0, XG Rev = 1. Nov 17 19:46:58 finger kernel: [ 6249.534860] qlge 0000:04:00.0: ql_display_dev_info: MAC address 00:c0:dd:1c:53:b4 Nov 17 19:46:58 finger kernel: [ 6249.534888] qlge 0000:04:00.1: PCI INT B -> GSI 44 (level, low) -> IRQ 44 Nov 17 19:46:58 finger kernel: [ 6249.549109] qlge 0000:04:00.1: ql_display_dev_info: Function #1, Port 1, NIC Roll 0, NIC Rev = 1, XG Roll = 0, XG Rev = 1. Nov 17 19:46:58 finger kernel: [ 6249.549112] qlge 0000:04:00.1: ql_display_dev_info: MAC address 00:c0:dd:1c:53:b6 Any assistance getting a link up on this is greatly appreciated...

    Read the article

  • any real MVC library in PHP (for GUI apps)

    - by mario
    I'm wondering if there are any abstraction frameworks for one of the PHP gui libraries. We have PHP-GTK, a PHP/Tk interface, and seemingly also PHP-QT. (Not tried any.) I know that writing against the raw Gtk+ interface in Python is just bearable, and it therefore seems not very enticing for PHP. I assume it's the same for Qt, and Tk is pretty low-level too. So I'm looking for something that provides a nicer object structure atop any of the three. Primarily TreeViews are always a chore and php-gtk callbacks are weird in PHP, so I'd like a simplification for that. If it eases adding the GUI/View atop my business logic without much control code, that might already help. And so since GUI apps are an area where MVC or MVP would actually make sense, I'd like to know if any library for that exists. Btw, recently rediscovered PHP interface preprocessor, but that's rather low-level and just provides a simple widget/interface abstraction for Gtk/ncurses/pdf/xhtml output.

    Read the article

  • Conflit between AVAudioRecorder and AVAudioPlayer

    - by John
    Hi, here is my problem : The code (FooController) : NSString *path = [[NSBundle mainBundle] pathForResource:@"mySound" ofType:@"m4v"]; soundEffect = [[AVAudioPlayer alloc] initWithContentsOfURL:[NSURL fileURLWithPath:path] error:NULL]; [soundEffect play]; // MicBlow micBlow = [[MicBlowController alloc]init]; And MicBlowController contains : NSURL *url = [NSURL fileURLWithPath:@"/dev/null"]; NSDictionary *settings = [NSDictionary dictionaryWithObjectsAndKeys: [NSNumber numberWithFloat: 44100.0], AVSampleRateKey, [NSNumber numberWithInt: kAudioFormatAppleLossless], AVFormatIDKey, [NSNumber numberWithInt: 1], AVNumberOfChannelsKey, [NSNumber numberWithInt: AVAudioQualityMax], AVEncoderAudioQualityKey, nil]; and [recorder updateMeters]; const double ALPHA = 0.05; double peakPowerForChannel = pow(10,(0.05*[recorder peakPowerForChannel:0])); lowPassResults = ALPHA * peakPowerForChannel + (1.0 - ALPHA) * lowPassResults; NSLog(@"Average input: %f Peak input %f Low pass results: %f",[recorder averagePowerForChannel:0],[recorder peakPowerForChannel:0],lowPassResults); If I play the background sound and try to get the peak from the mic I get this log : Average input: 0.000000 Peak input -120.000000 Low pass results: 0.000001 But if I comment all parts about AVAudioPlayer it works. I think there is a problem of channel. Thanks

    Read the article

  • What are modern and old compilers written in?

    - by ulum
    As a compiler, other than an interpreter, only needs to translate the input and not run it the performance of itself should be not that problematic as with an interpreter. Therefore, you wouldn't write an interpreter in, let's say Ruby or PHP because it would be far too slow. However, what about compilers? If you would write a compiler in a scripting language maybe even featuring rapid development you could possibly cut the source code and initial development time by halv, at least I think so. To be sure: With scripting language I mean interpreted languages having typical features that make programming faster, easier and more enjoyable for the programmer, usually at least. Examples: PHP, Ruby, Python, maybe JavaScript though that may be an odd choice for a compiler What are compilers normally written in? As I suppose you will respond with something low-level like C, C++ or even Assembler, why? Are there compilers written in scripting languages? What are the (dis)advantages of using low or high level programming languages for compiler writing?

    Read the article

  • Language Design: Combining Gotos and Functions

    - by sub
    I'm designing and currently rethinking a low-level interpreted programming language with similarities to assembler. I very soon came across the functions/loops/gotos decision problem and thought that while loops like while and for would be too high-level and unfitting, gotos would be too low level, unmaintainable and generally evil again. Functions like you know them from most languages that have return values and arguments aren't fitting in the language's concept either. So I tried to figure out something between a function and a goto which is capable of Recursion Efficient loops After some thinking I came up with the idea of subroutines: They have a beginning and an end like a function They have a name but no arguments like a goto You can go into one with jump and go out of it again before its end with return (doesn't give back any result, only stops the subroutine) Handled just like normal code - Global scope like goto So I wanted to know: Is the idea above good? What are the (dis)advantages? Would there be a better combination of function and goto or even a completely new idea?

    Read the article

  • please explain NHibernate HiLo

    - by Ben
    I'm struggling to get my head round how the HiLo generator works in NHibernate. I've read the explanation here which made things a little clearer. My understanding is that each SessionFactory retrieves the high value from the database. This improves performance because we have access to IDs without hitting the database. The explanation from the above link also states: For instance, supposing you have a "high" sequence with a current value of 35, and the "low" number is in the range 0-1023. Then the client can increment the sequence to 36 (for other clients to be able to generate keys while it's using 35) and know that keys 35/0, 35/1, 35/2, 35/3... 35/1023 are all available. How does this work in a web application as don't I only have one SessionFactory and therefore one hi value. Does this mean that in a disconnected application you can end up with duplicate (low) ids in your entity table? In my tests I used these settings: <id name="Id" unsaved-value="0"> <generator class="hilo"/> </id> I ran a test to save 100 objects. The IDs in my table went from 32768 - 32868. The next hi value was incremented to 2. Then I ran my test again and the Ids were in the range 65536 - 65636. First off, why start at 32768 and not 1, and secondly why the jump from 32868 to 65536? Now I know that my surrogate keys shouldn't have any meaning but we do use them in our application. Why can't I just have them increment nicely like a SQL Server identity field would. Finally can someone give me an explanation of how the max_lo parameter works? Is this the maximum number of low values (entity ids in my head) that can be created against the high value? This is one topic in NHibernate that I have struggled to find documentation for. I read the entire NHibernate in action book and it still doesn't go into how this works in any detail. Thanks Ben

    Read the article

  • Blackjack game reshuffling problem-edited

    - by Jam
    I am trying to make a blackjack game where before each new round, the program checks to make sure that the deck has 7 cards per player. And if it doesn't, the deck clears, repopulates, and reshuffles. I have most of the problem down, but for some reason at the start of every deal it reshuffles the deck more than once, and I can't figure out why. Help, please. Here's what I have so far: (P.S. the imported cards and games modules aren't part of the problem, I'm fairly sure my problem lies in the deal() function of my BJ_Deck class.) import cards, games class BJ_Card(cards.Card): """ A Blackjack Card. """ ACE_VALUE = 1 def get_value(self): if self.is_face_up: value = BJ_Card.RANKS.index(self.rank) + 1 if value > 10: value = 10 else: value = None return value value = property(get_value) class BJ_Deck(cards.Deck): """ A Blackjack Deck. """ def populate(self): for suit in BJ_Card.SUITS: for rank in BJ_Card.RANKS: self.cards.append(BJ_Card(rank, suit)) def deal(self, hands, per_hand=1): for rounds in range(per_hand): if len(self.cards)>=7*(len(hands)): print "Reshuffling the deck." self.cards=[] self.populate() self.shuffle() for hand in hands: top_card=self.cards[0] self.give(top_card, hand) class BJ_Hand(cards.Hand): """ A Blackjack Hand. """ def __init__(self, name): super(BJ_Hand, self).__init__() self.name = name def __str__(self): rep = self.name + ":\t" + super(BJ_Hand, self).__str__() if self.total: rep += "(" + str(self.total) + ")" return rep def get_total(self): # if a card in the hand has value of None, then total is None for card in self.cards: if not card.value: return None # add up card values, treat each Ace as 1 total = 0 for card in self.cards: total += card.value # determine if hand contains an Ace contains_ace = False for card in self.cards: if card.value == BJ_Card.ACE_VALUE: contains_ace = True # if hand contains Ace and total is low enough, treat Ace as 11 if contains_ace and total <= 11: # add only 10 since we've already added 1 for the Ace total += 10 return total total = property(get_total) def is_busted(self): return self.total > 21 class BJ_Player(BJ_Hand): """ A Blackjack Player. """ def is_hitting(self): response = games.ask_yes_no("\n" + self.name + ", do you want a hit? (Y/N): ") return response == "y" def bust(self): print self.name, "busts." self.lose() def lose(self): print self.name, "loses." def win(self): print self.name, "wins." def push(self): print self.name, "pushes." class BJ_Dealer(BJ_Hand): """ A Blackjack Dealer. """ def is_hitting(self): return self.total < 17 def bust(self): print self.name, "busts." def flip_first_card(self): first_card = self.cards[0] first_card.flip() class BJ_Game(object): """ A Blackjack Game. """ def __init__(self, names): self.players = [] for name in names: player = BJ_Player(name) self.players.append(player) self.dealer = BJ_Dealer("Dealer") self.deck = BJ_Deck() self.deck.populate() self.deck.shuffle() def get_still_playing(self): remaining = [] for player in self.players: if not player.is_busted(): remaining.append(player) return remaining # list of players still playing (not busted) this round still_playing = property(get_still_playing) def __additional_cards(self, player): while not player.is_busted() and player.is_hitting(): self.deck.deal([player]) print player if player.is_busted(): player.bust() def play(self): # deal initial 2 cards to everyone self.deck.deal(self.players + [self.dealer], per_hand = 2) self.dealer.flip_first_card() # hide dealer's first card for player in self.players: print player print self.dealer # deal additional cards to players for player in self.players: self.__additional_cards(player) self.dealer.flip_first_card() # reveal dealer's first if not self.still_playing: # since all players have busted, just show the dealer's hand print self.dealer else: # deal additional cards to dealer print self.dealer self.__additional_cards(self.dealer) if self.dealer.is_busted(): # everyone still playing wins for player in self.still_playing: player.win() else: # compare each player still playing to dealer for player in self.still_playing: if player.total > self.dealer.total: player.win() elif player.total < self.dealer.total: player.lose() else: player.push() # remove everyone's cards for player in self.players: player.clear() self.dealer.clear() def main(): print "\t\tWelcome to Blackjack!\n" names = [] number = games.ask_number("How many players? (1 - 7): ", low = 1, high = 8) for i in range(number): name = raw_input("Enter player name: ") names.append(name) print game = BJ_Game(names) again = None while again != "n": game.play() again = games.ask_yes_no("\nDo you want to play again?: ") main() raw_input("\n\nPress the enter key to exit.") Since someone decided to call this 'psychic-debugging', I'll go ahead and tell you what the modules are then. Here's the cards module: class Card(object): """ A playing card. """ RANKS = ["A", "2", "3", "4", "5", "6", "7", "8", "9", "10", "J", "Q", "K"] SUITS = ["c", "d", "h", "s"] def __init__(self, rank, suit, face_up = True): self.rank = rank self.suit = suit self.is_face_up = face_up def __str__(self): if self.is_face_up: rep = self.rank + self.suit else: rep = "XX" return rep def flip(self): self.is_face_up = not self.is_face_up class Hand(object): """ A hand of playing cards. """ def init(self): self.cards = [] def __str__(self): if self.cards: rep = "" for card in self.cards: rep += str(card) + "\t" else: rep = "<empty>" return rep def clear(self): self.cards = [] def add(self, card): self.cards.append(card) def give(self, card, other_hand): self.cards.remove(card) other_hand.add(card) class Deck(Hand): """ A deck of playing cards. """ def populate(self): for suit in Card.SUITS: for rank in Card.RANKS: self.add(Card(rank, suit)) def shuffle(self): import random random.shuffle(self.cards) def deal(self, hands, per_hand = 1): for rounds in range(per_hand): for hand in hands: if self.cards: top_card = self.cards[0] self.give(top_card, hand) else: print "Can't continue deal. Out of cards!" if name == "main": print "This is a module with classes for playing cards." raw_input("\n\nPress the enter key to exit.") And here's the games module: class Player(object): """ A player for a game. """ def __init__(self, name, score = 0): self.name = name self.score = score def __str__(self): rep = self.name + ":\t" + str(self.score) return rep def ask_yes_no(question): """Ask a yes or no question.""" response = None while response not in ("y", "n"): response = raw_input(question).lower() return response def ask_number(question, low, high): """Ask for a number within a range.""" response = None while response not in range(low, high): response = int(raw_input(question)) return response if name == "main": print "You ran this module directly (and did not 'import' it)." raw_input("\n\nPress the enter key to exit.")

    Read the article

  • Java .doc generation

    - by bozo
    Hi, anyone knows an easy method to generate mail merge .doc file from Java? So, I want to create a Word (95/97) document in Word, put some simple placeholders in it (only single value, no iterators and other advanced tags) like the ones used with mailmerge option, and then at runtime replace those placeholders with values from Java. One option is to use Jasperreports, but this would require that I create exact replica of non-trivial Word document in Jasper format, which is not easy and is hard to change later. Is there some method of filling placeholders in Word from Java, which does not require low-level document alteration with positioning and others low-level .doc tags from code, but something like this: docPreparer.fillPlaceholder('placeholder1', 'my real value from runtime'); Some CRMs do this via ActiveX control for internet explorer, and it works great (they use Word's mailmerge) but I need an all-Java solution. Ideas? Thanks, Bozo

    Read the article

  • Memory issue regarding UIImageView on IPhone 4.0 / IPad

    - by Sagar Mane
    Hello All, My Application is crashing due to low memory [ Received memory warning level 1 + 2] To trace this I have used Instrument and come with following points Test Enviorment : Single view controller added on Window When I don't use UIImageView Real Memory is used 3.66 MB When I uses UIImageView with Image having size 25 KB : Real Memory is used 4.24 MB. almost 560 KB extra when compare to w/o UIImageView and which keep on adding as I am adding more UIImageview on the view. below is sample code for adding UIImageview which I am refering UIImageView* iSplashImage = [[UIImageView alloc] initWithImage:[UIImage imageNamed:@"Default-Landscape.png"]]; iSplashImage.frame = CGRectMake(0, 0, 320, 480); [self.window addSubview:iSplashImage]; AND dealloc if(iSplashImage) { [iSplashImage release]; iSplashImage = nil; } Issue is this 560 KB is not getting release and after some time application receives low memory warning. Can anyone point out if I am missing something or doing else. As My application uses lots of Images in One session. Thanks in Advance, Sagar

    Read the article

  • MPI: is there mpi libraries capable of message compression?

    - by osgx
    Sometimes MPI is used to send low-entropy data in messages. So it can be useful to try to compress messages before sending it. I know that MPI can work on very fast networks (10 Gbit/s and more), but many MPI programs are used with cheap network like 0,1G or 1Gbit/s Ethernet and with cheap (slow, low bisection) network switch. There is a very fast Snappy (wikipedia) compression algorithm, which has Compression speed is 250 MB/s and decompression speed is 500 MB/s so on compressible data and slow network it will give some speedup. Is there any MPI library which can compress MPI messages (at layer of MPI; not the compression of ip packets like in PPP). MPI messages are also structured, so there can be some special method, like compression of exponent part in array of double.

    Read the article

  • Follow up viewDidUnload vs. dealloc question...

    - by entaroadun
    Clarification question as a follow up to: http://stackoverflow.com/questions/2261972/what-exactly-must-i-do-in-viewdidunload http://stackoverflow.com/questions/1158788/when-should-i-release-objects-in-voidviewdidunload-rather-than-in-dealloc So let's say there's a low memory error, and the view is hidden, and viewDidUnload is called. We do the release and nil dance. Later the entire view stack is not needed, so dealloc is called. Since I already have the release and nil stuff in viewDidUnload, I don't have it in dealloc. Perfect. But if there's no low memory error, viewDidUnload is never called. dealloc is called and since I don't have the release and nil stuff, there's a memory leak. In other words, will dealloc ever be called without viewDidUnload being called first? And the practical follow up to that is, if I alloc and set something in viewDidLoad, and I release it and set to nil in viewDidUnload, do I leave it out of dealloc, or do I do a defensive nil check in dealloc and release/nil it if it's not nil?

    Read the article

  • Calling SetWindowsHookEx inside VS2008 debugger always returns NULL

    - by SoMoS
    we're working on a .Net application that does a low level keyboard hook. When we call the SetWindowsHookEx running inside the debugger the call always fail. When running from the compiled executable everything works fine. If we attach to the processs the the SetWindowsHookEx has been called everything works too. I've read somewhere (I can not remember) that VS already does a low level keyboard hook but this shouldn't be a problem as there is the CallNextHook function. Someone knows what's happening? EDIT: The code is pretty straigfoward, the exception is thrown inside debugger but not outside. Public Sub New() m_callback = New NativeMethods.KeyboardHookDelegate(AddressOf KeyboardCallback) End Sub Public Sub Start() m_handle = NativeMethods.SetWindowsHookEx(NativeMethods.HookType.WH_KEYBOARD_LL, m_callback, Marshal.GetHINSTANCE(Reflection.Assembly.GetExecutingAssembly().GetModules()(0)).ToInt32, 0) If m_handle = 0 Then Throw New Exception() End If End Sub

    Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >