Search Results

Search found 2504 results on 101 pages for 'hp envy'.

Page 72/101 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Is anyone else using OpenBSD as a router in the enterprise? What hardware are you running it on?

  - by Kamil Kisiel

  We have an OpenBSD router at each of our locations, currently running on generic "homebrew" PC hardware in a 4U server case. Due to reliability concerns and space considerations we're looking at upgrading them to some proper server-grade hardware with support etc. These boxes serve as the routers, gateways, and firewalls at each site. At this point we're quite familiar with OpenBSD and Pf, so hesitant at moving away from the system to something else such as dedicated Cisco hardware. I'm currently thinking of moving the systems to some HP DL-series 1U machines (model yet to be determined). I'm curious to hear if other people use a setup like this in their business, or have migrated to or away from one.

  Read the article

• VMXNET3 nic loses the ability to update ARP table after N hours

  - by Peter

  I have a fedora 18 VM that stops updating the arp table on eth1 after running for a number of hours to days. There are other VMs on the same hypervisor that can access all of the same networks without issue. A tcpdump of the offending NIC shows only ARP broadcasts but no responses. None of the other VMs on the vDS see the ARP broadcasts from the offending NIC. The only way I can currently solve the problem is to reboot the VM and then everything works for a while. I've tried changing the port on the vDS and even flipping the network configurations after I lose eth1's ARP table, but the ARP problem follows eth1 but I can access the machines that were originally on eth1. If I statically add the arp entries for machines on the same subnet I have no problems with connectivity. The Hypervisor is an HP BL49X series with flex-10 network modules. Has anyone seen anything like this before?

  Read the article

• Separating user resources - Windows Server 2008 (Terminal Server)

  - by Christopher Wilson

  At the moment I am running a Windows Terminal Server 2008 for around 10 clients that use the server to run programs and access data. Is there anyway to separate the resources of each user so that they do not impact each other in terms of resources. User 1: Opens program User 2: Notices slow down I have looked into using Windows System Resource Manager but do not know if it provides what I need and if there are any other 3rd party tools that also provide this functionality. Any answer is appreciated. Server Specs: HP ProLiant ML110 G7 Processor: Intel® Xeon® E3-1220 (4 core, 3.1 GHz, 8MB, 80W, 1333/t) RAM: 12GB DDR3 ECC 1TB HDD

  Read the article

• cloud/grid computing

  - by tom smith

  Hi guys. I'm appologizing in advance to the guys who will tell me this isn't a tech/server/IT issue! But I've been beating my head around this for a couple of days now. I'm trying figure out who to talk to, or which company I can approach to try to see if there are Grid/Cloud Computing companies who have programs setup to deal with colleges. I'm dealing with a compsci course, and we're looking at a few projects that would require a great deal of computing/computational resources. But in calling different companies (HP/Rackspace/etc..) I'm either not getting through to the right depts, or to the right people, or the companies just aren't setup for this. There are plenty of companies who have discounts for desktop software/hardware, but who in the biz deals with discounts/offerings for Cloud/Grid Computing solutions?? Any thoughts/pointers would be greatly appreciated. Thanks -tom

  Read the article

• Unable to edit CIFS Share permissions

  - by Datapimp23

  Hi, I have this backup Disk to disk device HP Storageworks 2540i. Managing the device is via a web interface. I joined the device into our AD domain in the CIFS server configuration. I then created a CIFS share called backupdata. If I try to access it I'm prompted for a login. The permissions tab in the web interface is empty. The following message is displayed. "CIFS Authentication is managed through Active Directory" However I do not find the share in AD. I forced replication between all DCs and I do not find it. Is there another way to edit the permissions?

  Read the article

• Windows 2008 Print Server issue

  - by HokieMike

  I have a dedicated windows 2008 server I use as a file server and print server at my home office. Whenever I print documents from one of my clients, I see the document hit the queue on the server immediately (says its in "printing" status), but it takes FOREVER to print out (like over 5 minutes). But, printing the same document locally from the server takes 4 seconds. It's an HP 1006P laser printer. I am running 32-bit 2008 Server. Installed the Vista drivers ( updated to latest version ). Tried updating the drivers on the clients too and no dice. Any ideas on how to troubleshoot?

  Read the article

• size of extent on LVM2

  - by piotrek

  in LVM1 there was a limit of 65k extends. So size of extent had to been chosen carefully between wasted space on partitions (to big extent) and maximal possible size of logical volume (too small extent). in lvm2 (according to http://docstore.mik.ua/manuals/hp-ux/en/5992-4589/apa.html) the limit is ~16 million extents. so the default size of 4mb gives ~60TB of LV size. so is there any point in making the extent larger than 4-16mb on a desktop? is there any performance degradation or other costs of having big number of extents?

  Read the article

• Wrong PC-projector resolution in Windows 7

  - by peter.olsson

  I'm connecting a PC-projector (Benq MP721) to a Windows 7 Professional laptop (HP 6730b). All the output settings on the laptop, including the laptop screen, changes to 1024x768 (which the projector supports). However the projector says it receives 1360x768 and asks me to change the resolution to 1024x768. I'm using mirrored display. The laptop is 1024x768 The screen resolution in the control panel says 1024x768 The Intel graphics card utilities says 1024x768 The driver for the projector is a Generic PnP Monitor Is there anything in Windows 7 that would convert my 4:3 resolution to wide screen automatically?

  Read the article

• Dual boot Windows 7 with Windows 8- Dynamic Disk

  - by MeetM

  Its a long explanation. I have a HP Pavilion dm4 notebook. It has pre installed Windows 7 Home Pre. Recently, I tried to install Windows 8 developer preview on my notebook, but while installing, it only allowed me to insatll it on my primary Windows 7 drive I.e. drive C. I had kept 1 empty partition for Windows 8 but when I selectced that option, the next button at the bottom of the window just grey with some error saying Windows cannot boot from this drive....blah blah blah So I googled and found another way of doing it by VHD(virtual hard disk). This seemed to work but on restarting gave me "VHD_BOOT_INITIALIZATION_FAILED" error. After trying all possible ways for around 10 times, I gave up. I noticed that d only thing difference in d tutorials and my notebook is the Disk type. They all had Basic and I have Dynamic. Is that the reason m not able to boot Windows 8? Any suggestions?

  Read the article

• Linking RSA with Logstash etc

  - by Anuj

  i was wondering whether we can use logstash or any other opn source or free Log management too to collect,index the data and then feed this index into RSA envision or any other enterprise SIEM tool. Will this be beneficial in any way? Also are the indexes of various Log Management and SIEM tools -- splunk,RSA envision,HP Arcsight Logger and Logstash etc compatiable with each other. My organization is planning to buy RSA envision appliance and is there any way to restrict or select only certian type of log files eg: security logs or apache logs .. so that onlt those are monitored and this will reduce the EPS(events per second).

  Read the article

• Dual boot new laptop win 7 / ubuntu 12.04 - 750gb + 32gb SSD

  - by Alex Waters

  I have just purchased a new HP dv7t-7000 and I would like to run Windows 7 / Ubuntu. How do I setup the dual boot? Can I install both operating systems with an 8gb USB drive? Can I still make use of the 32gb SSD? I'm unfamiliar with the efficacy of using an SSD for caching with a 750gb 7200rpm sata 3 drive. I can only see using it for windows 7 - which I have installed in order to play games. Thank you!

  Read the article

• Why DELL PowerConnect and Juniper are so rare ? Why do enterprises stick with Cisco ?

  - by Kedare

  Hello ! I have a little question, I'm actually studing IT in France, and when looking on alternative on the very [...] very expensive Cisco equipments, I've found Juniper and DELL PowerConnect pretty attractive on features and price, but I rarely see something else than the classics Cisco/LinkSys, HP Procurve and Netgear.. Why it's so rare to find those switch ? They looks really great but... I've never seen any Juniper or Powerconnect... Why do enterprises stick with the expensive Cisco ? I've tried to find how to buy both, it's quite easy with PowerConnect, everything is on the DELL website, but it looks it's very hard to find Juniper equipments in France :( Thank you !

  Read the article

• IP KVM switch, or serial console box for remote admin?

  - by grahzny

  We have a small server farm (11 now, may add more in the future) of HP Proliant DL160 G6s. They all run either Linux (server only, no X11) or VMware ESX. We had intended to get models with iLO, in case BIOS-level remote admin became an issue, but that didn't happen. I had an IP KVM switch recommended to me (along with some sort of Remote Reboot hardware.) I've since realized that none of our machines need GUI administration, so perhaps a serial console switch would be a cheaper and more appropriate option. Something like this: http://www.kvm-switches-online.com/serimux-cs-32.html Do you folks have an opinions on which way is a better choice? Should we go for the ease of setup (plug and go, instead of turning on the feature in the BIOS and making sure the serial settings are correct) and the flexibility of an IP KVM switch even with the extra cost? Or is a serial console switch just fine?

  Read the article

• How to fix bluescreen in windows 7 with multi-boot?

  - by Ismail Sensei

  I have HP laptop 6730S with two Operating systems : Windows 7 Ultimate 32bit Centos 6.4 64Bit The GRUB2 is not installed in MBR, use Windows' bootloader. After I choose Windows in the start, the blue-screen appears with unmountable_boot_volume problem so I tried some help from similar questions here ( use Command Prompt and enter the following command: chkdsk /R C: ). But the problem is, I can't get repair my computer it took so long and nothing happened after I waited more than 2H and when I put my Windows 7 DVD to boot it charge the files then same thing happened nothing show up so I couldn't use command prompt. But when I use Centos everything works just fine the D partition i can mounted normally but C partition it shows me error and tell me to go to windows and repair it with Chkdsk command and here is where I am stuck.

  Read the article

• Stuck in power saving mode

  - by sazabi02

  I've got an LG monitor I tried attaching to my laptop for dual monitor goodness and it worked fine but when I tried attaching it back to the desktop it stuck in "Power Saving mode" and wouldn't go away. The CPU's starting up but nothing happens with the monitor. I try attaching it back to the laptop and it works fine again. I don't understand what could have happened. For reference, the laptop I'm using is an HP laptop with nVidia GT240M video card running on an i7 processor while the desktop runs on a Dual Core processor with an nVidia 9400GT video card. I've never had problems like these with other monitors I've attached my pc to. Anyone got any ideas?

  Read the article

• Linux and ClickPads

  - by John

  I just got my Arch / Windows 7 dual-boot setup running... except for one thing. I have an HP dv6-3127dx laptop, which is an issue when it comes to Linux because it does not have a traditional touchpad, but a "ClickPad." This means where the left and right buttons exist, it is also sensitive to moving the pointer. The issue comes in when I try to steady the mouse with one finger, while clicking the left click with another, because the mouse freaks out. It's also an issue because it's not recognizing the right click whatsoever. I am currently using the default Synaptics drivers downloaded from pacman on Arch Linux, running Linux v2.6.36. EDIT: The question of course is, how can I fix this?

  Read the article

• Print server does not show up on router's attached devices

  - by AshTee

  Recently I bought a new more powerful wireless N router, DLink DIR 628. So I removed all connections from the previous router (Netgear WGT624) and connected them as they should be to the DLInk router. Everything works fine except for the print server. I have Hawking print server connected to HP Laserjet 6P parallel port printer. It works well with the Netgear router. But when I connect it to the DLInk router, it does not even show up in the LAN computers list. I am not sure what is going on. There is a utility called PSAdmin that can talk to the Hawking print server if I switch to Netgear router. With that utility, I can get the assigned IP address to the print server. But when switching to DLink router, even the PSAdmin fails to find the print server. I have been trying various things for last couple of days in vein. Please help.

  Read the article

• Can I replace a broken PSU with one of a smaller size?

  - by Carson Myers

  I have a broken OEM power supply unit that is cooked. I'm browsing online to find a replacement and am happy to see that they don't cost too much -- the only thing is they all seem to have varying sizes. Is it a problem if I get a PSU that is smaller than the original one? This is going in an HP Pavillion a000, it's about five and a half years old -- I don't know if that means anything, I just thought there might be some recent standardized dimensions for PSUs or something. No idea.

  Read the article

• Why does Windows spooler require an administrator account?

  - by Software Monkey

  Does anyone know what changes I might need to make to allow restricted users to print using a printer configured for spooling? My Windows XP SP3 system currently requires me to use an Admin account for printing if the printer is configured to spool documents before printing. If the printer is configured for direct printing it works for all accounts. This used to work and some months back it just stopped, and I can't pin down why. The printer, which is an HP PSC 1200 (an old printer) itself is configured for Everyone to have Print authority and my specific (restricted) account to have Full authority, that is Print, Manage Printers and Manager Documents. My HDD is locked down for restricted users given them only read authority to the entire file system except their data directories, which is how I have run my systems for years. I assume there may be a directory somewhere that I need to allow users to write to.

  Read the article

• SNMP - Value of CPU processor load not reflecting reality

  - by Ovesh

  Trying to plot CPU load on my server, with the following hardware: ProLiant DL360p Gen8 (same behavior on ProLiant DL360 G7). The machine is running VMWare ESXi5.1 To create a CPU spike I run dd if=/dev/zero of=/dev/null, and I know the CPU is overloaded, because I can see a correlating spike in the graphs displayed on vCenter. However, running this snmpwalk: snmpwalk -v 1 -c ******** 192.168.MY_IP 1.3.6.1.2.1.25.3.3.1.2 Shows the following results: iso.3.6.1.2.1.25.3.3.1.2.1 = INTEGER: 3 iso.3.6.1.2.1.25.3.3.1.2.2 = INTEGER: 2 iso.3.6.1.2.1.25.3.3.1.2.3 = INTEGER: 2 iso.3.6.1.2.1.25.3.3.1.2.4 = INTEGER: 3 Am I not looking into the right MIB? Should I be multiplying these by a constant? By the way, using HP Agentless Monitoring I was able to get some cpu stats, but not what I'm looking for, at least nothing I could find wading through these MIBs.

  Read the article

• force other screen on boot

  - by PaoloFCantoni

  I have a multi-boot Windows 7 (32bit & 64 bit) on my HP Notebook. Unfortunately, the Notebook screen has been trashed (due to daughter dropping it). So I have attached a second screen. On the 64 bit system, after windows has started, the logon screen comes up on the 2nd monitor just fine. On the 32 bit system, the logon screen still comes up on the Notebook monitor and I have to open the lid, and shut it so that it then switches to the attached screen. In both cases the display has been set to only display on the attached screen (ie if I "identify" the attached screen says: '1'). Is there any setting I can use to force the OS to use the attached screen? TIA, Paolo

  Read the article

• MS-DOSdivide overflow

  - by repozitor

  when i want to install my dear application on MS-DOS os, i see error "Divide Overflow" what is the meaning of this error and how to fix it? the procedure of installing is: 1-partitioing my HDD disk 2-format C drive 3-installing MS-DOS 4-add the flowing lines to config.sys "DEVICE=C:\DOS\HIMEM.SYS DEVICE=C:\DOS\EMM386.EXE RAM DEVICE=C:\DOS\RAMDRIVE.SYS 6000 512 64 /e" 5-insert my floppy application and then restart 6-when boot process completed, all of the thing appear correctly and i now how to do the next steps note:for installing my application i need to boot from floppy app when i have ms-dos on my hdd disk i do it successfully on the Virtual machine, Q emulator but i can't do it on the real machine, Vectra HP PC, because of divide overflow

  Read the article

• Mac OS X Duplex Printing Paper Handling Oddness

  - by Christian Lindig

  I like to print on stationery with a pre-printed letterhead using the Preview.app and a duplex-capable HP PostScript (Color Laserjet 4700) printer. One would think that pre-printed stationery could be placed into one of the trays and then printed on front and reverse side. Unfortunately, the print dialog handles one and two-paged documents differently: the stationery needs to be placed differently into the tray if the document contains one page versus when it contains two pages. This is not obvious when printing on plain paper but becomes obvious once you mark, say, the upper left front corner of pages and then print different documents on them. I checked the PostScript code generated and indeed it is different for one versus two-page documents with respect to duplex printing, probably causing the difference in paper handling. Obviously this makes it difficult to print pre-printed stationery in duplex mode. I expected others to have stumbled upon this but could not find specific help so far. Any ideas? This is on OS X 10.6 and I checked two different printers.

  Read the article

• Freezing with black screen after booting OS with AMD Catalyst driver

  - by Oleg

  I have ATI Mobility Radeon HD 5470 on my HP laptop. A few weeks ago I was confused with a weird trouble in proprietary drivers for my graphics card. When I start X server (or just boot Windows) system sometimes totally hangs up with black screen. The most annoying thing is that issue appearing is absolutely random (2 success, 3 fails, 1 success, 7 fails, etc.). It appears both on Linux (Arch, Debian 7) and Windows XP. I've tried reinstalling OS, drivers, etc. I've also tried updating BIOS. Then boot was successful for the next few times and issue appeared again (probably it was just a coincidence, because another BIOS updates gave no results). I really don't know what to do. Any ideas?

  Read the article

• Using "enterprise" switches in home network?

  - by Industrial

  Hi everyone, After more than 12 years working with computers, I am still way behind when it comes to networking, so please bear with me :) As of this Christmas, the number of computers in my home has increased and it's well about time to upgrade the current network hardware in order to offer LAN connection to all computers. Trying to find a cheap solution, A close friend offered me a great deal on a "enterprise-class" Switch from HP (more LAN ports than I would ever need), at the same price as what a brand new Netgear or D-link Switch with 6/8 ports would cost me in retail. Would it be common sense to get this one and start using it immediately and never again have to worry about running out of LAN connections, or am I taking on a bigger bite than what I could chew?

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >