Search Results

Search found 2193 results on 88 pages for 'multichannel vpn'.

Page 72/88 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• router propogation usng OSPF

  - by liv2hak

  I am using Juniper J-series routers to emulate a small telco and VPN customer.I need to use OSPF so that the path to each internal subnet is propogated to all PE nodes.The network topology is given below. To achieve this I am planning to run the following commands in UOW-TAU and UOW-HAM. set protocols ospf area 0.0.0.0 interface ge-0/0/0 set protocols ospf area 0.0.0.0 interface lo0.0 Do I need to do any additional configuration in TAU-PE1 and HAM-PE1 routers for it to receive the OSPF paths.? I am a beginner at the routing.Any help is appreciated.

  Read the article

• Streaming media from linux server - low footprint is crucial

  - by Mike Haye

  I recently pre-ordered the Raspberry Pi. http://www.raspberrypi.org/faqs For those of you who don't know it, it's a machine with 256 mb ram and a 700 MHz processor for $35. I plan to run linux on an SD card on this machine and have it act as both a htpc, VPN and media server. In regard to the media server part, I need to find some linux software that has a small footprint, but allows me to stream media to other devices connected to the internet (preferably without having to install any additional software on the client machines) Also, I would love if the video could be compressed, so the data usage wouldn't be so big for the client machine (e.g. when I'm using my data plan on my smartphone ;) ) Thanks in advance for any answers :) Mike.

  Read the article

• AFP / Apple Filling Protocol aka Netatalk access over Internet

  - by PJJ

  I got a simple cloud server and thought it would be nice to have mac native afp Volumes accesss. Installed Netatalk and this seems to work pretty nice. No sensitive data or something but I don't like to wake up someday and have my www docs rm-rfed by some kid h4x0r. Q1: Is afp encrypted? Q2: How can I make it (semi)secure? Q3: Does VPN makes sense for this? Q4: What would you do to get afp working over net? Opening any service meant for Lan only is a basic flaw, i know - but me be ignorant about it. According to Apple Dev only the authentication is encrypted or am I mssing something?

  Read the article

• Where are Credentials stored for Network Drives on WinXP?

  - by Tom Tresansky

  I have a drive mapped to a folder on a remote machine that I connect to using the Cisco VPN client. The password to the Windows account I use on that remote machine has changed. I had stored the username/password locally, using Window's remember my password feature, so I wouldn't have to enter it every time (the enter user/password login dialog used to appear each time I attempted to open the remote folder, and I would have to look up and enter my credentials). The password to that remote Windows account has changed. Now, I am no longer prompted to enter a user name / password, but instead, upon trying to open the remote folder, receive a message: unknown user name or bad password. How do I view and change these stored credentials?

  Read the article

• How can I connect to a CIFS/SMB share on a non-default port?

  - by fsckin

  I'm trying to get a contractor connected to a CIFS share (port 445). He's not a big shop (so no go on using VPN). His ISP blocks outgoing connections on port 445. I've been doing some rsync to ftp madness as a workaround to have the share available to him, but it's getting out of control -- we're syncing nearly 40GB a day to an external ftp site and it's going to be much easier just to have him connect and only grab the stuff he needs. So... I can have the CIFS share open to the internet (filtered to allow access to his IP only) on port 446. How the heck can he connect to that? I looked through "net use" and didn't see anything about using another port.

  Read the article

• unusual webpage access problem

  - by user28163

  This is one of the weirdest problems I've ever seen and I'm out of ideas. I cannot access a couple of websites from my home pc (for 3-4 days now), or at least they go really really slow ~700b/s I can access these same websites fine from my laptop from same IP address. - The websites originate from different countries and are huge popular sites. - I have tried both my PC's network cards. - I have reformatted my PC. - I have reset my router to factory settings. - I have created virtual computers on my PC, and from inside those I cannot access the webpages. - I have flushed my dns. - I tried specifying my dns server addresses to 8.8.8.8 and 8.8.4.4. I can only access the webpages using my PC, if I first connect to an outside VPN. Again, these sites work fine on the 2 other pcs in this house (same ISP and internet connection). help plz :)

  Read the article

• IP Tunneling for Spotify? [closed]

  - by everwicked

  I was in the UK and enjoyed Spotify relentlessly. Now I've moved back to Greece and I can't even pay for the darn thing. So my idea was this- I have a server in France and it has a fail-over IP in the UK. So I installed a proxy server on it and made it listen to the UK IP. So far so good. Then, I played Spotify for a while through the proxy server just fine, and it thought I was in the UK. But now... it gives me an error message that I'm in another country than the one on my profile (UK). I don't really understand why - maybe they also geolocate the IP address of the client, not just the proxy server? Either way, I'm kinda stuck - is there a way to tunnel Spotify's network traffic through my server transparently? Maybe a VPN or something similar? Thanks

  Read the article

• Is there a convenient way to manually copy the Log Shipping *.trn files from one SQL 2008 server to

  - by Rick

  We have a remote SQL 2008 server (ServerB) that needs to keep a warm (15 minute interval is OK) copy of production data (ServerA). ServerA is also SQL 2008. Log Shipping looks like it will do the job. We can only get to the destination ServerB with remote desktop. Is there a way to set this up when we can't get to both servers from one Management Studio? We want to be able to temporarily (until a VPN is setup between our network and the ServerB network) manually export a small .trn file, copy it via remote desktop to ServerB and then manually import those transactions from the .trn file. My supervisor says he saw a post saying this is possible. We were just trying to avoid doing a full database backup and copying that every time. Thanks in advance for any suggestions on this.

  Read the article

• How can I set up OpenVPN to accept more than 60 connections?

  - by Robin

  Greetings! We're using OpenVPN and today hit an unexpected connection limit of 60 - even though max-clients is set to the source code default 1024. Server log: Tue Dec 21 13:49:41 2010 MULTI: new incoming connection would exceed maximum number of clients (60) We're slowly adding new clients to the VPN and expect to hit 200 some time next year, if we can get it working. We're running the server on a Win2003 R2. OpenVPN 2.0.9 Server config as follows: local 192.168.10.211 port 1195 proto tcp dev tun dev-node OpenVPN_Vision ca vision_ca.crt cert vision_server.crt key vision_server.key # This file should be kept secret dh vision_dh1024.pem server 192.168.211.0 255.255.255.0 ifconfig-pool-persist vision_ipp.txt ;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 ;client-to-client keepalive 10 120 comp-lzo ;max-clients 100 # Default in source code is 1024 persist-key persist-tun status openvpn-status-vision.log log vision.log verb 3 I would greatly appreciate any help or input on this one. Thanks! Best regards, Robin

  Read the article

• Monitoring ASA packet loss via SNMP

  - by dunxd

  I want to monitor packet loss on my ASA 5505 VPN endpoints using SNMP. This is so I can graph the rates in Cacti and/or get alerts in Nagios. However, I am not sure what SNMP values I should use to measure packet loss. In the ASA I can run sh interface Internet stats to show traffic statistics for the interface connected to the Internet. This shows 1 minute and 5 minute drop rates. Are these measures an indicator of packet loss? Are there SNMP values I can access that correspond to those values? Should I be looking at different values? Is the ASA even able to measure packet loss?

  Read the article

• How can I restrict SSH access when the source IP is dynamic

  - by Supratik

  Hi I want to protect SSH access to our live web server from all IP's except our office static IP. There are some employees who connects to this live server from their dynamic IP's. So, it is not always possible for me to change in the iptables rule in live server whenever the dynamic IP of the employee changes. I tried to put them in office VPN and allowed only SSH access from office IP but the office connection is slow in compared to our employee's private internet connection, moreover it adds an extra overhead to our office network. Is there any way I can solve this problem ?

  Read the article

• How come I can't ping my home computer?

  - by bikefixxer

  I'm trying to set up a vpn into my home computer in order to access files from wherever. I have the home computer set up with a no-ip dynamic dns program so I can always connect, and have also tried using the actual ip address. However, when I try to connect or even ping from anywhere outside of my house I can't get through. I've tried putting that particular computer in the dmz, turned off the computers firewall and anti-virus, and I still don't get anything. I have comcast as my home internet provider. I have also tried from two different locations. Are there any other solutions I can try or is comcast the issue? I used to be able to do this when I ran a small web server at home for fun but now nothing works. Thanks in advance for any suggestions!

  Read the article

• How do I keep multiple copies of Outlook in sync when using RPC over HTTP?

  - by Don

  I use Outlook 2007 at work with our Exchange 2003 server. I just setup my home system with Outlook 2007 so that I could use the RPC over HTTP to access Exchange without having to use a VPN. It works fine. I can get mail, send mail, etc. What it doesn't seem to be doing is staying in sync. For example, I read a few messages at home, moved them into different folders from the Inbox, etc. That all seemed fine. When I login to my work machine and look at the copy of Outlook there, the mail is still unread and nothing has been moved. Am I missing something simple here? I would have to assume that my home machine should be telling Exchange where these messages belong and that they've been read. Both machines are running Windows 7, if that matters. Ideas?

  Read the article

• Windows Server 2008: Terminal Services / VDI

  - by JohnyD

  I have a Dell R710 with 72GB of memory running Hyper-V. Within Hyper-V I have a Windows 2008 (32-bit) VM running Terminal Services. How do I allocate memory so that any user who connects to this Terminal Server (from their thin-client) is allocated 2GB (or whatever amount I choose) of memory? Currently I have provisioned the TS with 2GB of memory but it seems that this is shared among all that connect. Please let me know if there is further information I can provide. Thank you. Update 1: What I'm looking to accomplish with this server is setting up a VDI to allow users to connect from thin-clients from within our network. They will also have to connect from outside our network via VPN which is already in place. Am I able to set this up using Windows Server 2008 (not R2) because I have a 16-bit application which needs to be supported. Unfortunately it's not a candidate as a Remote App.

  Read the article

• Server 2012 R2 DNS Conditional forwarding not working reliably, possible caching issue?

  - by Matt

  I have a bit of a home lab setup with a domain controller that is acting as the DNS server for my network. For everything, it's working fine and forwards external DNS requests to my ISP. The household recently wanted to get Netflix going and it seemed a DNS option was better than a VPN to get around the region locking, so I signed up for unblock-us.com Since I have a Windows DNS server I thought I'd be clever and make use of conditional forwarders and added the Netflix domain to the list. Initially this worked well and all devices on the network could now access Netflix, however after about an hour going to the Netflix site would result in a page cannot be found. Doing an nslookup of Netflix.com from my PC resulted in it not returning any IP addresses. As a test, I deleted the Netflix domain from the DNS servers cache and things started working again - devices could get to the site again however the same thing happens again after around half an hour to an hour. Have I missed something here that's causing it to stop working?

  Read the article

• Hyper-V management remotely

  - by Péter

  I'll tell you in advance that I'm newbie in the topic. I have a Win8 (Home) machine with Hyper-V installed behind a router. The router has a public IP and a domain attached. I have another Win8 (Work) machine also installed Hyper-V. I want to access to my home Hyper-V via Hyper-V Manager so I can manage my virtual machines from work. I found this article but I don't know if it's applicable to me. I thought that a simple port forwarding should work and I only need to do is grant the Work HV manager my domain and the port I choose and if it's pop a login form I only need to fill the user data of my Home computer? How can I solve this? My thoughts revolve around: - Port forwarding - set domain+port and set my home user - Set up a VPN and use the local ip address of my home computer (it looks like a little cumbersome and my router only support PPTP) I'm open to any other solution too. Thanks, Péter

  Read the article

• IP stops working from time to time

  - by Mattias

  Hi, have a problem that I can't seem to find the reason for. We are running a small network with windows clients(XP/Win7) and windows servers(2008 sp2/2008r2). The domaincontroller is working as DC, DNS, DHCP, VPN. We have a Level1 FBR4000 between internet and our internal network. The problem is that from time to time specific IP-adresses stops working, the only way I have gotten the devices to work again is to exclude the specific IP from the DHCP address pool and getting a new IP, then everything works again. It seems as the specific IP is beeing banned/blocked somewhere but I just can't figure out where. Anyone got an idea as to where I should start to look? I could also point out that I just reinstalled all servers due to a officemove and was hoping to get away from this problem but it just showed up again. This last time it was my iPhone that got stuck through the Wi-Fi...

  Read the article

• Remote Desktop over SSH SOCKS proxy to bypass firewall

  - by scrumpyjack

  Hi folks, I'm trying to connect to a Windows server from my Mac using RDC2.1 for Mac. The problem is the server I need to connect to is guarded by the evil dragon - IP-based access control on a completely separate network. I have an IP I can get in on, but it's at my office (i.e. a completely separate network). Because that network isn't set up for VPN, I've set up a SOCKS proxy through an SSH tunnel (which is all working fine). (SSH proxy) Me (on my Mac) ----------> Office Linux box ----> Windows server (home network) (office network) (other network) From my Linux server in my office (the SSH server) I can telnet to port 3389 on the Windows server, no problem. But from my Mac I can't get so much as a squeak out of it. Any ideas?

  Read the article

• How can I launch RemoteApp on Windows Server from server itself at startup

  - by Rusted

  I have Windows Server 2008 R2 with RDS and custom desktop (GUI) application installed on the server. The app is started as RemoteApp on server by user from his desktop computer (or, sometimes, he can work from notebook over VPN). Some details about environment: the server automatically shuts down every evening and automatically power-on every morning (this is a requirement) desktop application do some precalculations/precaching on startup and it can take lot of time mentioned application have some memory leaks, so I can't use hibernate instead of shutdown When user launching this app from his computer, he can't start work with it until this app finishes pre-initialization. Is there any way to start RemoteApp session at the server startup (without actual user logon), so that the user could connect to this session from his computer later? I don't want to involve the user's computer to make it work. I have tried to do it by Windows startup script, but have no luck - starting RDP session requires actual user session.

  Read the article

• Testing UDP port connectivity

  - by Lock

  I am trying to test whether I can get to a particular port on a remote server (both of which I have access to) through UDP. Both servers are internet facing. I am using netcat to have a certain port listening. I then use nmap to check for that port to see if it is open, but it doesn't appear to be. Iptables is turned off. Any suggestions why this could be? I am eventually going to setup a VPN tunnel, but because I'm very new to tunnels, I want to make sure I have connectivity on port UDP 1194 before advancing.

  Read the article

• sql server log shipping

  - by voam

  I am setting up log shipping with two 2008 sql servers connecting with a vpn. As far as I know as long as the sql agent is able to access the share on the primary/secondary servers everything will work. When I set up the Log shipping on the primary server using SQL Mangagement Studio, before I can set any of the "Secondary Database Settings" it asks me to connect to the secondary server. But I really don't want to open up the connection to the secondary server. I will be initialing this secondary database with a backup so as long as the transaction logs get copies everything should work. How to I work around the GUI not enabling any of the settings for the secondary server until I actually connect to it? Thanks in advance!

  Read the article

• "DNS not responding" error with D-Link router and PPTP internet connection

  - by Born2win

  I have a D-Link DIR-615 router since around six months. My internet connection is VPN (PPTP) based, i.e. I have been given a username and password from my ISP and my IP address is dynamic. Since a few days I am experiencing a serious problem. My router connects normally (I can see the yellow light), but my computer is giving me a "DNS not responding" error. I have tried everything (reset, reboot etc.) but no success.

  Read the article

• Windows 7 keep internet connection after IPSec established

  - by mmc18

  How I can keep internet connection after establishing IpSec connection to server? I have followed to following link to establihed IpSec server http://rootmanager.com/ubuntu-ipsec-l2tp-windows-domain-auth/setting-up-openswan-xl2tpd-with-native-windows-clients.html then following the below one to connect this server from Windows 7 machine. http://confoundedtech.blogspot.com/2012/07/windows-l2tp-ipsec-vpn-connection-to.html I am able to connect and properly sending data. But after establihing IpSec conenction, my internet conenction is dropped. How I can keep both connection alive?

  Read the article

• Why do my proxy settings keep changing?

  - by tjrobinson

  I am running Windows 7 and a few times a day the "Use a proxy server for your LAN (These settings will not apply to dial-up of VPN connections)." under "Local Area Network (LAN) Settings" checkbox becomes checked seemingly on it's own. Am I pressing some kind of hidden keyboard shortcut accidentally? What sort of applications might alter this setting and why? Unfortunately as this is a developer box, there's a lot of stuff that could be interfering, e.g. Visual Studio 2010, Windows Azure SDK and various browsers. Has anyone else come across this?

  Read the article

• pinx 501 with print server - 10 licenses

  - by ra170

  I have pix 501 with only 10 licenses. I'm already approaching this limit, running 2 computers at home, 2 laptops, PS3, iphones, 2 web cams..not everthing is on all the time, but it's possible as I'm looking into adding a print server, so that I can print from anywhere in the house. So my question is, will the print server count as a connection towards the license? I think it will need default gateway, which in this case will be my pix 501. I've seen somewhere on some othee board saying, don't set default gateway in the print server to pix 501, but then how would that work? is there a work around? I don't need to print from VPN or from outside, just inside..

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >