Search Results

Search found 1859 results on 75 pages for 'pen and paper'.

Page 72/75 | < Previous Page | 68 69 70 71 72 73 74 75  | Next Page >

• Taking web sites offline for demonstration

  While working in software development in general, and in web development for a couple of customers it is quite common that it is necessary to provide a test bed where the client is able to get an image, or better said, a feeling for the visions and ideas you are talking about. Usually here at IOS Indian Ocean Software Ltd. we set up a demo web site on one of our staging servers, and provide credentials to the customer to access and review our progress and work ad hoc. This gives us the highest flexibility on both sides, as the test bed is simply online and available 24/7. We can update the structure, the UI and data at any time, and the client is able to view it as it suits best for her/him. Limited or lack of online connectivity But what is going to happen when your client is not capable to be online - no matter for what reasons; here are some more obvious ones: No internet connection (permanently or temporarily) Expensive connection, ie. mobile data package, stay at a hotel, etc. Presentation devices at an exhibition, ie. using tablets or iPads Being abroad for a certain time, and only occasionally online No network coverage, especially on mobile Bad infrastructure, like ie. in Third World countries Providing a catalogue on CD or USB pen drive Anyway, it doesn't matter really. We should be able to provide a solution for the circumstances of our customers. Presentation during an exhibition Recently, we had the following request from a customer: Is it possible to let us have a desktop version of ResortWork.co.uk that we can use for demo purposes at the forthcoming Ski Shows? It would allow us to let stand visitors browse the sites on an iPad to view jobs and training directory course listings. Yes, sure we can do that. Eventually, you might think why don't they simply use 3G enabled iPads for that purpose? As stated above, there might be several reasons for that - low coverage, expensive data packages, etc. Anyway, it is not a question on how to circumvent the request but to deliver a solution to that. Possible solutions... or not? We already did offline websites earlier, and even established complete mirrors of one or two web sites on our systems. There are actually several possibilities to handle this kind of request, and it mainly depends on the system or device where the offline site should be available on. Here, it is clearly expressed that we have to address this on an Apple iPad, well actually, I think that they'd like to use multiple devices during their exhibitions. Following is an overview of possible solutions depending on the technology or device in use, and how it can be done: Replication of source files and database The above mentioned web site is running on ASP.NET, IIS and SQL Server. In case that a laptop or slate runs a Windows OS, the easiest way would be to take a snapshot of the source files and database, and transfer them as local installation to those Windows machines. This approach would be fully operational on the local machine. Saving pages for offline usage This is actually a quite tedious job but still practicable for small web sites Tool based approach to 'harvest' the web site There quite some tools in the wild that could handle this job, namely wget, httrack, web copier, etc. Screenshots bundled as PDF document Not really... ;-) Creating screencast or video Simply navigate through your website and record your desktop session. Actually, we are using this kind of approach to track down difficult problems in order to see and understand exactly what the user was doing to cause an error. Of course, this list isn't complete and I'd love to get more of your ideas in the comments section below the article. Preparations for offline browsing The original website is dynamically and data-driven by ASP.NET, and looks like this: As we have to put the result onto iPads we are going to choose the tool-based approach to 'download' the whole web site for offline usage. Again, depending on the complexity of your web site you might have to check which of the applications produces the best results for you. My usual choice is to use wget but in this case, we run into problems related to the rewriting of hyperlinks. As a consequence of that we opted for using HTTrack. HTTrack comes in different flavours, like console application but also as either GUI (WinHTTrack on Windows) or Web client (WebHTTrack on Linux/Unix/BSD). Here's a brief description taken from the original website about HTTrack: HTTrack is a free (GPL, libre/free software) and easy-to-use offline browser utility. It allows you to download a World Wide Web site from the Internet to a local directory, building recursively all directories, getting HTML, images, and other files from the server to your computer. HTTrack arranges the original site's relative link-structure. Simply open a page of the "mirrored" website in your browser, and you can browse the site from link to link, as if you were viewing it online. And there is an extensive documentation for all options and switches online. General recommendation is to go through the HTTrack Users Guide By Fred Cohen. It covers all the initial steps you need to get up and running. Be aware that it will take quite some time to get all the necessary resources down to your machine. Actually, for our customer we run the tool directly on their web server to avoid unnecessary traffic and bandwidth. After a couple of runs and some additional fine-tuning - explicit inclusion or exclusion of various external linked web sites - we finally had a more or less complete offline version available. A very handsome feature of HTTrack is the error/warning log after completing the download. It contains some detailed information about errors that appeared on the pages and the links within the pages that have been processed. Error: "Bad Request" (400) at link www.resortwork.co.uk/job-details_Ski_hire:tech_or_mgr_or_driver_37854.aspx (from www.resortwork.co.uk/Jobs_A_to_Z.aspx)Error: "Not Found" (404) at link www.247recruit.net/images/applynow.png (from www.247recruit.net/css/global.css)Error: "Not Found" (404) at link www.247recruit.net/activate.html (from www.247recruit.net/247recruit_tefl_jobs_network.html) In our situation, we took the records of HTTP 400/404 errors and passed them to the web development department. Improvements are to be expected soon. ;-) Quality assurance on the full-featured desktop Unfortunately, the generated output of HTTrack was still incomplete but luckily there were only images missing. Being directly on the web server we simply copied the missing images from the original source folder into our offline version. After that, we created an archive and transferred the file securely to our local workspace for further review and checks. From that point on, it wasn't necessary to get any more files from the original web server, and we could focus ourselves completely on the process of browsing and navigating through the offline version to isolate visual differences and functional problems. As said, the original web site runs on ASP.NET Web Forms and uses Postback calls for interaction like search, pagination and partly for navigation. This is the main field of improving the offline experience. Of course, same as for standard web development it is advised to test with various browsers, and strangely we discovered that the offline version looked pretty good on Firefox, Chrome and Safari, but not in Internet Explorer. A quick look at the HTML source shed some light on this, and there are conditional CSS inclusions based on the user agent. HTTrack is not acting as Internet Explorer and so we didn't have the necessary overrides for this browser. Not problematic after all in our case, but you might have to pay attention to this and get the IE-specific files explicitly. And while having a view at the source code, we also found out that HTTrack actually modifies the generated HTML output. In several occasions we discovered that <div> elements were converted into <table> constructs for no obvious reason; even nested structures. Search 'e'nd destroy - sed (or Notepad++) to the rescue During our intensive root cause analysis for a couple of HTML/CSS problems that needed some extra attention it is very helpful to be familiar with any editor that allows search and replace over multiple files like, ie. sed - stream editor for filtering and transforming text on Linux or my personal favourite Notepad++ on Windows. This allowed us to quickly fix a lot of anchors with onclick attributes and Javascript code that was addressed to ASP.NET files instead of their generated HTML counterparts, like so: grep -lr -e '.aspx' * | xargs sed -e 's/.aspx/.html?/g' The additional question mark after the HTML extension helps to separate the query string from the actual target and solved all our missing hyperlinks very fast. The same can be done in Notepad++ on Windows, too. Just use the 'Replace in files' feature and you are settled. Especially, in combination with Regular Expressions (regex). Landscape of browsers Okay, after several runs of HTML/CSS code analysis, searching and replacing some strings in a pool of more than 4.000 files, we finally had a very good match of an offline browsing experience in Firefox and Chrome on Linux. Next, we transferred that modified set of files to a Windows 8 machine for review on Firefox, Chrome and Internet Explorer 7 to 10, and a Mac mini running Mac OS X 10.7 to check the output on Safari and again on Chrome. Besides IE, for reasons already mentioned above, the results were identical. And last but not least it was about to check web site on tablets. Please continue to read on the following articles: Taking web sites offline for demonstration on Galaxy Tablet Taking web sites offline for demonstration on iPad

  Read the article

• Rapid Evolution of Society & Technology

  - by Michael Snow

  We caught up with Brian Solis on the phone the other day and Christie Flanagan had a chance to chat with him and learn a bit more about him and some of the concepts he'll be addressing in our Social Business Thought Leaders Webcast on Thursday 12/13/12. «--- Interview with Brian Solis  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast- mso-fareast-theme-font:minor-latin; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Be sure and register for this week's webcast ---» ------------------- Guest post by Brian Solis. Reposted (Borrowed) from his posting of May 24, 2012 Dear [insert business name], what’s your promise? - Brian Solis You say you want to get closer to customers, but your actions are different than your words. You say you want to “surprise and delight” customers, but your product development teams are too busy building against a roadmap without consideration of the 5th P of marketing…people. Your employees are your number one asset, however the infrastructure of the organization has turned once optimistic and ambitious intrapreneurs into complacent cogs or worse, your greatest detractors. You question the adoption of disruptive technology by your internal champions yet you’ve not tried to find the value for yourself. You’re a change agent and you truly wish to bring about change, but you’ve not invested time or resources to answer “why” in your endeavors to become a connected or social business. If we are to truly change, we must find purpose. We must uncover the essence of our business and the value it delivers to traditional and connected consumers. We must rethink the spirit of today’s embrace and clearly articulate how transformation is going to improve customer and employee experiences and relationships now and over time. Without doing so, any attempts at evolution will be thwarted by reality. In an era of Digital Darwinism, no business is too big to fail or too small to succeed. These are undisciplined times which require alternative approaches to recognize and pursue new opportunities. But everything begins with acknowledging the 360 view of the world that you see today is actually a filtered view of managed and efficient convenience. Today, many organizations that were once inspired by innovation and engagement have fallen into a process of marketing, operationalizing, managing, and optimizing. That might have worked for the better part of the last century, but for the next 10 years and beyond, new vision, leadership and supporting business models will be written to move businesses from rigid frameworks to adaptive and agile entities. I believe that today’s executives will undergo a great test; a test of character, vision, intention, and universal leadership. It starts with a simple, but essential question…what is your promise? Notice, I didn’t ask about your brand promise. Nor did I ask for you to cite your mission and vision statements. This is much more than value propositions or manufactured marketing language designed to hook audiences and stakeholders. I asked for your promise to me as your consumer, stakeholder, and partner. This isn’t about B2B or B2C, but instead, people to people, person to person. It is this promise that will breathe new life into an organization that on the outside, could be misdiagnosed as catatonic by those who are disrupting your markets. A promise, for example, is meant to inspire. It creates alignment. It serves as the foundation for your vision, mission, and all business strategies and it must come from the top to mean anything. For without it, we cannot genuinely voice what it is we stand for or stand behind. Think for a moment about the definition of community. It’s easy to confuse a workplace or a market where everyone simply shares common characteristics. However, a community in this day and age is much more than belonging to something, it’s about doing something together that makes belonging matter The next few years will force a divide where companies are separated by intention as measured by actions and words. But, becoming a social business is not enough. Becoming more authentic and transparent doesn’t serve as a mantra for a renaissance. A promise is the ink that inscribes the spirit of the relationship between you and me. A promise serves as the words that influence change from within and change beyond the halls of our business. It is the foundation for a renewed embrace, one that must then find its way to every aspect of the organization. It’s the difference between a social business and an adaptive business. While an adaptive business can also be social, it is the culture of the organization that strives to not just use technology to extend current philosophies or processes into new domains, but instead give rise to a new culture where striving for relevance is among its goals. The tools and networks simply become enablers of a greater mission You are reading this because you believe in something more than what you’re doing today. While you fight for change within your organization, remember to aim for a higher purpose. Organizations that strive for innovation, imagination, and relevance will outperform those that do not. Part of your job is to lead a missionary push that unites the groundswell with a top down cascade. Change will only happen because you and other internal champions see what others can’t and will do what other won’t. It takes resolve. It takes the ability to translate new opportunities into business value. And, it takes courage. “This is a very noisy world, so we have to be very clear what we want them to know about us”-Steve Jobs ----------------------------------------------------------------- So -- where do you begin to evaluate the kind of experience you are delivering for your customers, partners, and employees?  Take a look at this White Paper: Creating a Successful and Meaningful Customer Experience on the Web and then have a cup of coffee while you listen to the sage advice of Guy Kawasaki in a short video below.   An interview with Guy Kawasaki on Maximizing Social Media Channels 

  Read the article

• Developing a Cost Model for Cloud Applications

  - by BuckWoody

  Note - please pay attention to the date of this post. As much as I attempt to make the information below accurate, the nature of distributed computing means that components, units and pricing will change over time. The definitive costs for Microsoft Windows Azure and SQL Azure are located here, and are more accurate than anything you will see in this post: http://www.microsoft.com/windowsazure/offers/  When writing software that is run on a Platform-as-a-Service (PaaS) offering like Windows Azure / SQL Azure, one of the questions you must answer is how much the system will cost. I will not discuss the comparisons between on-premise costs (which are nigh impossible to calculate accurately) versus cloud costs, but instead focus on creating a general model for estimating costs for a given application. You should be aware that there are (at this writing) two billing mechanisms for Windows and SQL Azure: “Pay-as-you-go” or consumption, and “Subscription” or commitment. Conceptually, you can consider the former a pay-as-you-go cell phone plan, where you pay by the unit used (at a slightly higher rate) and the latter as a standard cell phone plan where you commit to a contract and thus pay lower rates. In this post I’ll stick with the pay-as-you-go mechanism for simplicity, which should be the maximum cost you would pay. From there you may be able to get a lower cost if you use the other mechanism. In any case, the model you create should hold. Developing a good cost model is essential. As a developer or architect, you’ll most certainly be asked how much something will cost, and you need to have a reliable way to estimate that. Businesses and Organizations have been used to paying for servers, software licenses, and other infrastructure as an up-front cost, and power, people to the systems and so on as an ongoing (and sometimes not factored) cost. When presented with a new paradigm like distributed computing, they may not understand the true cost/value proposition, and that’s where the architect and developer can guide the conversation to make a choice based on features of the application versus the true costs. The two big buckets of use-types for these applications are customer-based and steady-state. In the customer-based use type, each successful use of the program results in a sale or income for your organization. Perhaps you’ve written an application that provides the spot-price of foo, and your customer pays for the use of that application. In that case, once you’ve estimated your cost for a successful traversal of the application, you can build that into the price you charge the user. It’s a standard restaurant model, where the price of the meal is determined by the cost of making it, plus any profit you can make. In the second use-type, the application will be used by a more-or-less constant number of processes or users and no direct revenue is attached to the system. A typical example is a customer-tracking system used by the employees within your company. In this case, the cost model is often created “in reverse” - meaning that you pilot the application, monitor the use (and costs) and that cost is held steady. This is where the comparison with an on-premise system becomes necessary, even though it is more difficult to estimate those on-premise true costs. For instance, do you know exactly how much cost the air conditioning is because you have a team of system administrators? This may sound trivial, but that, along with the insurance for the building, the wiring, and every other part of the system is in fact a cost to the business. There are three primary methods that I’ve been successful with in estimating the cost. None are perfect, all are demand-driven. The general process is to lay out a matrix of: components units cost per unit and then multiply that times the usage of the system, based on which components you use in the program. That sounds a bit simplistic, but using those metrics in a calculation becomes more detailed. In all of the methods that follow, you need to know your application. The components for a PaaS include computing instances, storage, transactions, bandwidth and in the case of SQL Azure, database size. In most cases, architects start with the first model and progress through the other methods to gain accuracy. Simple Estimation The simplest way to calculate costs is to architect the application (even UML or on-paper, no coding involved) and then estimate which of the components you’ll use, and how much of each will be used. Microsoft provides two tools to do this - one is a simple slider-application located here: http://www.microsoft.com/windowsazure/pricing-calculator/  The other is a tool you download to create an “Return on Investment” (ROI) spreadsheet, which has the advantage of leading you through various questions to estimate what you plan to use, located here: https://roianalyst.alinean.com/msft/AutoLogin.do?d=176318219048082115  You can also just create a spreadsheet yourself with a structure like this: Program Element Azure Component Unit of Measure Cost Per Unit Estimated Use of Component Total Cost Per Component Cumulative Cost               Of course, the consideration with this model is that it is difficult to predict a system that is not running or hasn’t even been developed. Which brings us to the next model type. Measure and Project A more accurate model is to actually write the code for the application, using the Software Development Kit (SDK) which can run entirely disconnected from Azure. The code should be instrumented to estimate the use of the application components, logging to a local file on the development system. A series of unit and integration tests should be run, which will create load on the test system. You can use standard development concepts to track this usage, and even use Windows Performance Monitor counters. The best place to start with this method is to use the Windows Azure Diagnostics subsystem in your code, which you can read more about here: http://blogs.msdn.com/b/sumitm/archive/2009/11/18/introducing-windows-azure-diagnostics.aspx This set of API’s greatly simplifies tracking the application, and in fact you can use this information for more than just a cost model. After you have the tracking logs, you can plug the numbers into ay of the tools above, which should give a representative cost or in some cases a unit cost. The consideration with this model is that the SDK fabric is not a one-to-one comparison with performance on the actual Windows Azure fabric. Those differences are usually smaller, but they do need to be considered. Also, you may not be able to accurately predict the load on the system, which might lead to an architectural change, which changes the model. This leads us to the next, most accurate method for a cost model. Sample and Estimate Using standard statistical and other predictive math, once the application is deployed you will get a bill each month from Microsoft for your Azure usage. The bill is quite detailed, and you can export the data from it to do analysis, and using methods like regression and so on project out into the future what the costs will be. I normally advise that the architect also extrapolate a unit cost from those metrics as well. This is the information that should be reported back to the executives that pay the bills: the past cost, future projected costs, and unit cost “per click” or “per transaction”, as your case warrants. The challenge here is in the model itself - statistical methods are not foolproof, and the larger the sample (in this case I recommend the entire population, not a smaller sample) is key. References and Tools Articles: http://blogs.msdn.com/b/patrick_butler_monterde/archive/2010/02/10/windows-azure-billing-overview.aspx http://technet.microsoft.com/en-us/magazine/gg213848.aspx http://blog.codingoutloud.com/2011/06/05/azure-faq-how-much-will-it-cost-me-to-run-my-application-on-windows-azure/ http://blogs.msdn.com/b/johnalioto/archive/2010/08/25/10054193.aspx http://geekswithblogs.net/iupdateable/archive/2010/02/08/qampa-how-can-i-calculate-the-tco-and-roi-when.aspx   Other Tools: http://cloud-assessment.com/ http://communities.quest.com/community/cloud_tools

  Read the article

• Multiple data centers and HTTP traffic: DNS Round Robin is the ONLY way to assure instant fail-over?

  - by vmiazzo

  Hi, Multiple A records pointing to the same domain seem to be used almost exclusively to implement DNS Round Robin as a cheap load balancing technique. The usual warning against DNS RR is that it is not good for high availability. When 1 IP goes down clients will continue to use it for minutes. A load balancer is often suggested as a better choice. Both claims are not completely true: When the traffic is HTTP then, most of the HTML browsers are able to automatically try the next A record if the previous is down, without a new DNS look-up. Read here chapter 3.1 and here. When multiple data centers are involved then, DNS RR is the only option to distribute traffic across them. So, is it true that, with multiple data centers and HTTP traffic, the use of DNS RR is the ONLY way to assure instant fail-over when one data center goes down? Thanks, Valentino Edit: Off course each data center has a local Load Balancer with hot spare. It's OK to sacrifice session affinity for an instant fail-over. AFAIK the only way for a DNS to suggest a data center instead of another is to reply with just the IP (or IPs) associated to that data center. If the data center becomes unreachable then all those IP are also unreachables. This means that, even if smart HTML browsers are able to instantly try another A record , all the attempts will fail until the local cache entry expires and a new DNS lookup is done, fetching the new working IPs (I assume DNS automatically suggests to a new data center when one fail). So, "smart DNS" cannot assure instant fail-over. Conversely a DNS round-robin permits it. When one data center fail, the smart HTML browsers (most of them) instantly try the other cached A records jumping to another (working) data center. So, DNS round-robin doesn't assure session affinity or the lowest RTT but seems to be the only way to assure instant fail-over when the clients are "smart" HTML browsers. Edit 2: Some people suggest TCP Anycast as a definitive solution. In this paper (chapter 6) is explained that Anycast fail-over is related to BGP convergence. For this reason Anycast can employ from 15 minutes to 20 seconds to complete. 20 seconds are possible on networks where the topology was optimized for this. Probably just CDN operators can grant such fast fail-overs. Edit 3:* I did some DNS look-ups and traceroutes (maybe some expert can double check) and: The only CDN using TCP Anycast seems to be CacheFly, other operators like CDN networks and BitGravity use CacheFly. Seems that their edges cannot be used as reverse proxies. Therefore, they cannot be used to grant instant failover. Akamai and LimeLight seems to use geo-aware DNS. But! They return multiple A records. From traceroutes seems that the returned IPs are on the same data center. So, I'm puzzled on how they can offer a 100% SLA when one data center goes down.

  Read the article

• SQL SERVER – Create a Very First Report with the Report Wizard

  - by Pinal Dave

  This example is from the Beginning SSRS by Kathi Kellenberger. Supporting files are available with a free download from the www.Joes2Pros.com web site. What is the report Wizard? In today’s world automation is all around you. Henry Ford began building his Model T automobiles on a moving assembly line a century ago and changed the world. The moving assembly line allowed Ford to build identical cars quickly and cheaply. Henry Ford said in his autobiography “Any customer can have a car painted any color that he wants so long as it is black.” Today you can buy a car straight from the factory with your choice of several colors and with many options like back up cameras, built-in navigation systems and heated leather seats. The assembly lines now use robots to perform some tasks along with human workers. When you order your new car, if you want something special, not offered by the manufacturer, you will have to find a way to add it later. In computer software, we also have “assembly lines” called wizards. A wizard will ask you a series of questions, often branching to specific questions based on earlier answers, until you get to the end of the wizard. These wizards are used for many things, from something simple like setting up a rule in Outlook to performing administrative tasks on a server. Often, a wizard will get you part of the way to the end result, enough to get much of the tedious work out of the way. Once you get the product from the wizard, if the wizard is not capable of doing something you need, you can tweak the results. Create a Report with the Report Wizard Let’s get started with your first report!  Launch SQL Server Data Tools (SSDT) from the Start menu under SQL Server 2012. Once SSDT is running, click New Project to launch the New Project dialog box. On the left side of the screen expand Business Intelligence and select Reporting Services. Configure the properties as shown in . Be sure to select Report Server Project Wizard as the type of report and to save the project in the C:\Joes2Pros\SSRSCompanionFiles\Chapter3\Project folder. Click OK and wait for the Report Wizard to launch. Click Next on the Welcome screen.  On the Select the Data Source screen, make sure that New data source is selected. Type JProCo as the data source name. Make sure that Microsoft SQL Server is selected in the Type dropdown. Click Edit to configure the connection string on the Connection Properties dialog box. If your SQL Server database server is installed on your local computer, type in localhost for the Server name and select the JProCo database from the Select or enter a database name dropdown. Click OK to dismiss the Connection Properties dialog box. Check Make this a shared data source and click Next. On the Design the Query screen, you can use the query builder to build a query if you wish. Since this post is not meant to teach you T-SQL queries, you will copy all queries from files that have been provided for you. In the C:\Joes2Pros\SSRSCompanionFiles\Chapter3\Resources folder open the sales by employee.sql file. Copy and paste the code from the file into the Query string Text Box. Click Next. On the Select the Report Type screen, choose Tabular and click Next. On the Design the Table screen, you have to figure out the groupings of the report. How do you do this? Well, you often need to know a bit about the data and report requirements. I often draw the report out on paper first to help me determine the groups. In the case of this report, I could group the data several ways. Do I want to see the data grouped by Year and Month? Do I want to see the data grouped by Employee or Category? The only thing I know for sure about this ahead of time is that the TotalSales goes in the Details section. Let’s assume that the CIO asked to see the data grouped first by Year and Month, then by Category. Let’s move the fields to the right-hand side. This is done by selecting Page > Group or Details >, as shown in, and click Next. On the Choose the Table Layout screen, select Stepped and check Include subtotals and Enable drilldown, as shown in. On the Choose the Style screen, choose any color scheme you wish (unlike the Model T) and click Next. I chose the default, Slate. On the Choose the Deployment Location screen, change the Deployment folder to Chapter 3 and click Next. At the Completing the Wizard screen, name your report Employee Sales and click Finish. After clicking Finish, the report and a shared data source will appear in the Solution Explorer and the report will also be visible in Design view. Click the Preview tab at the top. This report expects the user to supply a year which the report will then use as a filter. Type in a year between 2006 and 2013 and click View Report. Click the plus sign next to the Sales Year to expand the report to see the months, then expand again to see the categories and finally the details. You now have the assembly line report completed, and you probably already have some ideas on how to improve the report. Tomorrow’s Post Tomorrow’s blog post will show how to create your own data sources and data sets in SSRS. If you want to learn SSRS in easy to simple words – I strongly recommend you to get Beginning SSRS book from Joes 2 Pros. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: Reporting Services, SSRS

  Read the article

• Finally, upgrade from Nokia X3 to Samsung Galaxy S III

  This time, something slightly different but nonetheless not less interesting, hopefully. Living on a remote island like Mauritius, ill-praised 'Cyber Island' in the Indian Ocean, has its advantages in life style and relaxed environment to life in but in terms of technological aspects it can be quite a nightmare. Well, I guess this might be different story to report about... one day. Cyber Island Mauritius Despite it's shiny advertisement as Cyber Island and business in ICT hub to Africa, Mauritius is not on the latest track of available models in computer hardware or, in the context of this article, cellulars or smart-phone, or communication technology in general. Okay, I have to admit that this statement is only partly true. Money can buy, even here in Mauritius. Luckily, there are ways and ways to deal with this outcry of modern, read: technological, civilisation issues. Online shopping you might think? Yes, for sure, until you discover in your checkout procedure that a small island in the Indian Ocean isn't a preferred destination for delivery and the precious time you spent on putting your items into your cart and feeding your personal level of anticipation gets ruined on the last stint. Ordering from abroad saves you money Anyway, I got in touch with my personal courier and luckily there were some extra-kilos left in the luggage. First obstacle sorted, we have a Transporter! Okay, on the next occasion off to Amazon online and using their Prime service for fast delivery. Actually, the order was placed on Saturday evening and everything got delivered on Tuesday morning - nice job in less than 72 hours. Okay, among the items of that shopping rush I ordered a shiny Samsung Galaxy S III 16GB in oceanic blue - did I mention, that you hardly get a blue model in Mauritius? - for my BWE. Interesting side-notes: First, Amazon Germany dropped the prices for roughly 30% on the S3, and we got the 16GB model for less than 500 Euro (or approx. Rs. 19.500,-) compared to the usual Rs. 27.000,- on the local market. It even varies whether the local price is inclusive or exclusive VAT (15%). Second, since a while she was bothering me to get an iPhone and an iPad for her, fair enough I thought, decent hardware, posh design and reliable services. Until we watched the 'magical' introduction of Samsung's new models at the IFA exhibition, she read the bashing comments on Google+ on the iPhone 5 and I gave her a brief summary on the law suit between Apple and Samsung in the USA. So, yes, Samsung USA is right, the next big thing is already here - literally. My BWE loves the look and touch of the Galaxy S3. And for me it was more cost-effective in terms of purchases done at the App Store, ups, Play Store. Transfer of contacts, text messages and media files Okay, now that the hardware is in place, how to transfer all those contacts, text messages, media files, etc. between those two devices? In the past, I used to use the Nokia Communication Suite between various models but now for Android? Well, as usual Google and Bing are reliable friends and among the first hits I came across an article about How to Transfer Contacts from Nokia to Android. Couldn't be easier, right? Well, sort of... my main Windows systems are already running on Windows 8, and this actually caused problems with the mobile/smart-phone device drivers. The article provides the download for an older version 1.10 which upgrades to 2.11 (as time of writing this entry) but both couldn't get the Galaxy S3 and the Nokia connected. Shame on me... the product page clearly doesn't mention Windows 8 (for now) and Windows 8 isn't available for the general audience at all... After I took a spare machine running on Windows Vista everything went smooth. Software installed, upgrade done, device drivers for Android automatically downloaded and installed, and the same painless routine for the Nokia part. I think, I rebooted the system twice during the whole setup procedure but hey, it was more or less a distraction while coding some stuff in ASP.NET MVC and Telerik Kendo UI. The transfer of contacts and text messages was done via Wondershare MobileGo for Android, and all media files by moving the additional microSD card from one device to the other. But even without an external SD card, it would have been very easy to copy the files via Windows Explorer directly. Little catch and excellent service Fine, we are almost done and the only step left is to shift the SIM card... Ouch, gotcha! The X3 uses a standard size SIM card while the S III only accepts microSIM form factor. What an irony, bigger smartphone needs smaller SIM card. Luckily, the next showroom of Emtel is just 5 mins away up the road, and the service staff over there know their job. Finally, after roughly 10 mins of paper work, activation and small chit-chat, the S3 came to life on the mobile network. Owning a smart-phone now and knowing that my BWE would like to interact more on social networks away from home, especially to upload pictures and provide local 'check-ins', I activated a data package for her in advance, too. Even that it is Saturday, everything was already done and ready to be used. Nice bonus: The Emtel clerk directly offered me to set up the configuration for the Emtel data services, yes sure, go ahead, this saves me to search for that in the settings. Okay, spoiler-alert here, setting a static APN to access the Emtel network and the internet wouldn't be a challenge. But hey, she already had the phone in her hands and I could keep my eyes on the children. Well done, Emtel! Resume Thanks to the useful software package by Wondershare is was a hands-free experience to transfer all the data from a Nokia mobile on Symbian S60 to a Samsung Galaxy S III on Android Ice Cream Sandwich (ICS). In the future, this wont be a serious issue at all anymore thanks to synchronisation services and cloud storage. And for now, I'm only waiting for the official upgrades for Jelly Bean.

  Read the article

• Why We Should Learn to Stop Worrying and Love Millennials

  - by HCM-Oracle

  By Christine Mellon Much is said and written about the new generations of employees entering our workforce, as though they are a strange specimen, a mysterious life form to be “figured out,” accommodated and engaged – at a safe distance, of course.  At its worst, this talk takes a critical and disapproving tone, with baby boomer employees adamantly refusing to validate this new breed of worker, let alone determine how to help them succeed and achieve their potential.   The irony of our baby-boomer resentments and suspicions is that they belie the fact that we created the very vision that younger employees are striving to achieve.  From our frustrations with empty careers that did not fulfill us, from our opposition to “the man,” from our sharp memories of our parents’ toiling for 30 years just for the right to retire, from the simple desire not to live our lives in a state of invisibility, came the seeds of hope for something better. One characteristic of Millennial workers that grew from these seeds is the desire to experience as much as possible.  They are the “Experiential Employee”, with a passion for growing in diverse ways and expanding personal and professional horizons.  Rather than rooting themselves in a single company for a career, or even in a single career path, these employees are committed to building a broad portfolio of experiences and capabilities that will enable them to make a difference and to leave a mark of significance in the world.  How much richer is the organization that nurtures and leverages this inclination?  Our curmudgeonly ways must be surrendered and our focus redirected toward building the next generation of talent ecosystems, if we are to optimize what future generations have to offer.   Accelerating Professional Development In spite of our Boomer grumblings about Millennials’ “unrealistic” expectations, the truth is that we have a well-matched set of circumstances.  We have executives-in-waiting who want to learn quickly and a concurrent, urgent need to ramp up their development time, based on anticipated high levels of retirement in the next 10+ years.  Since we need to rapidly skill up these heirs to the corporate kingdom, isn’t it a fortunate coincidence that they are hungry to learn, develop and move fluidly throughout our organizations??  So our challenge now is to efficiently operationalize the wisdom we have acquired about effective learning and development.   We have already evolved from classroom-based models to diverse instructional methods.  The next step is to find the best approaches to help younger employees learn quickly and apply new learnings in an impactful way.   Creating temporary or even permanent functional partnerships among Millennial employees is one way to maximize outcomes.  This might take the form of 2 or more employees owning aspects of what once fell under a single role.  While one might argue this would mean duplication of resources, it could be a short term cost while employees come up to speed.  And the potential benefits would be numerous:  leveraging and validating the inherent sense of community of new generations, creating cross-functional skills with broad applicability, yielding additional perspectives and approaches to traditional work outcomes, and accelerating the performance curve for incumbents through Cooperative Learning (Johnson, D. and Johnson R., 1989, 1999).  This well-researched teaching strategy, where students support each other in the absorption and application of new information, has been shown to deliver faster, more efficient learning, and greater retention. Alternately, perhaps short term contracts with exiting retirees, or former retirees, to help facilitate the development of following generations may have merit.  Again, a short term cost, certainly.  However, the gains realized in shortening the learning curve, and strengthening engagement are substantial and lasting. Ultimately, there needs to be creative thinking applied for each organization on how to accelerate the capabilities of our future leaders in unique ways that mesh with current culture. The manner in which performance is evaluated must finally shift as well.  Employees will need to be assessed on how well they have developed key skills and capabilities vs. end-to-end mastery of functional positions they have no interest in keeping for an entire career. As we become more comfortable in placing greater and greater weight on competencies vs. tasks, we will realize increased organizational agility via this new generation of workers, which will be further enhanced by their natural flexibility and appetite for change. Revisiting Succession  For many years, organizations have failed to deliver desired succession planning outcomes.  According to CEB’s 2013 research, only 28% of current leaders were pre-identified in a succession plan. These disappointing results, along with the entrance of the experiential, Millennial employee into the workforce, may just provide the needed impetus for HR to reinvent succession processes.   We have recognized that the best professional development efforts are not always linear, and the time has come to fully adopt this philosophy in regard to succession as well.  Paths to specific organizational roles will not look the same for newer generations who seek out unique learning opportunities, without consideration of a singular career destination.  Rather than charting particular jobs as precursors for key positions, the experiences and skills behind what makes an incumbent successful must become essential in succession mapping.  And the multitude of ways in which those experiences and skills may be acquired must be factored into the process, along with the individual employee’s level of learning agility. While this may seem daunting, it is necessary and long overdue.  We have talked about the criticality of competency-based succession, however, we have not lived up to our own rhetoric.  Many Boomers have experienced the same frustration in our careers; knowing we are capable of shining in a particular role, but being denied the opportunity due to how our career history lined up, on paper, with documented job requirements.  These requirements usually emphasized past jobs/titles and specific tasks, versus capabilities, drive and willingness (let alone determination) to learn new things.  How satisfying would it be for us to leave a legacy where such narrow thinking no longer applies and potential is amplified? Realizing Diversity Another bloom from the seeds we Boomers have tried to plant over the past decades is a completely evolved view of diversity.  Millennial employees assume a diverse workforce, and are startled by anything less.  Their social tolerance, nurtured by wide and diverse networks, is unprecedented.  College graduates expect a similar landscape in the “real world” to what they experienced throughout their lives.  They appreciate and seek out divergent points of view and experiences without needing any persuasion.  The face of our U.S. workforce will likely see dramatic change as Millennials apply their fresh take on hiring and building strong teams, with an inherent sense of inclusion.  This wonderful aspect of the Millennial wave should be celebrated and strongly encouraged, as it is the fulfillment of our own aspirations. Future Perfect The Experiential Employee is operating more as a free agent than a long term player, and their commitment will essentially last as long as meaningful organizational culture and personal/professional opportunities keep their interest.  As Boomers, we have laid the foundation for this new, spirited employment attitude, and we should take pride in knowing that.  Generations to come will challenge organizations to excel in how they identify, manage and nurture talent. Let’s support and revel in the future that we’ve helped invent, rather than lament what we think has been lost.  After all, the future is always connected to the past.  And as so eloquently phrased by Antoine Lavoisier, French nobleman, chemist and politico:  “Nothing is Lost, Nothing is Created, and Everything is Transformed.” Christine has over 25 years of diverse HR experience.  She has held HR consulting and corporate roles, including CHRO positions for Echostar in Denver, a 6,000+ employee global engineering firm, and Aepona, a startup software firm, successfully acquired by Intel. Christine is a resource to Oracle clients, to assist in Human Capital Management strategy development and implementation, compensation practices, talent development initiatives, employee engagement, global HR management, and integrated HR systems and processes that support the full employee lifecycle. 

  Read the article

• RIF PRD: Presentation syntax issues

  - by Charles Young

  Over Christmas I got to play a bit with the W3C RIF PRD and came across a few issues which I thought I would record for posterity. Specifically, I was working on a grammar for the presentation syntax using a GLR grammar parser tool (I was using the current CTP of ‘M’ (MGrammer) and Intellipad – I do so hope the MS guys don’t kill off M and Intellipad now they have dropped the other parts of SQL Server Modelling). I realise that the presentation syntax is non-normative and that any issues with it do not therefore compromise the standard. However, presentation syntax is useful in its own right, and it would be great to iron out any issues in a future revision of the standard. The main issues are actually not to do with the grammar at all, but rather with the ‘running example’ in the RIF PRD recommendation. I started with the code provided in Example 9.1. There are several discrepancies when compared with the EBNF rules documented in the standard. Broadly the problems can be categorised as follows: ·      Parenthesis mismatch – the wrong number of parentheses are used in various places. For example, in GoldRule, the RHS of the rule (the ‘Then’) is nested in the LHS (‘the If’). In NewCustomerAndWidgetRule, the RHS is orphaned from the LHS. Together with additional incorrect parenthesis, this leads to orphanage of UnknownStatusRule from the entire Document. ·      Invalid use of parenthesis in ‘Forall’ constructs. Parenthesis should not be used to enclose formulae. Removal of the invalid parenthesis gave me a feeling of inconsistency when comparing formulae in Forall to formulae in If. The use of parenthesis is not actually inconsistent in these two context, but in an If construct it ‘feels’ as if you are enclosing formulae in parenthesis in a LISP-like fashion. In reality, the parenthesis is simply being used to group subordinate syntax elements. The fact that an If construct can contain only a single formula as an immediate child adds to this feeling of inconsistency. ·      Invalid representation of compact URIs (CURIEs) in the context of Frame productions. In several places the URIs are not qualified with a namespace prefix (‘ex1:’). This conflicts with the definition of CURIEs in the RIF Datatypes and Built-Ins 1.0 document. Here are the productions: CURIE          ::= PNAME_LN                  | PNAME_NS PNAME_LN       ::= PNAME_NS PN_LOCAL PNAME_NS       ::= PN_PREFIX? ':' PN_LOCAL       ::= ( PN_CHARS_U | [0-9] ) ((PN_CHARS|'.')* PN_CHARS)? PN_CHARS       ::= PN_CHARS_U                  | '-' | [0-9] | #x00B7                  | [#x0300-#x036F] | [#x203F-#x2040] PN_CHARS_U     ::= PN_CHARS_BASE                  | '_' PN_CHARS_BASE ::= [A-Z] | [a-z] | [#x00C0-#x00D6] | [#x00D8-#x00F6]                  | [#x00F8-#x02FF] | [#x0370-#x037D] | [#x037F-#x1FFF]                  | [#x200C-#x200D] | [#x2070-#x218F] | [#x2C00-#x2FEF]                  | [#x3001-#xD7FF] | [#xF900-#xFDCF] | [#xFDF0-#xFFFD]                  | [#x10000-#xEFFFF] PN_PREFIX      ::= PN_CHARS_BASE ((PN_CHARS|'.')* PN_CHARS)? The more I look at CURIEs, the more my head hurts! The RIF specification allows prefixes and colons without local names, which surprised me. However, the CURIE Syntax 1.0 working group note specifically states that this form is supported…and then promptly provides a syntactic definition that seems to preclude it! However, on (much) deeper inspection, it appears that ‘ex1:’ (for example) is allowed, but would really represent a ‘fragment’ of the ‘reference’, rather than a prefix! Ouch! This is so completely ambiguous that it surely calls into question the whole CURIE specification.   In any case, RIF does not allow local names without a prefix. ·      Missing ‘External’ specifiers for built-in functions and predicates.  The EBNF specification enforces this for terms within frames, but does not appear to enforce (what I believe is) the correct use of External on built-in predicates. In any case, the running example only specifies ‘External’ once on the predicate in UnknownStatusRule. External() is required in several other places. ·      The List used on the LHS of UnknownStatusRule is comma-delimited. This is not supported by the EBNF definition. Similarly, the argument list of pred:list-contains is illegally comma-delimited. ·      Unnecessary use of conjunction around a single formula in DiscountRule. This is strictly legal in the EBNF, but redundant.   All the above issues concern the presentation syntax used in the running example. There are a few minor issues with the grammar itself. Note that Michael Kiefer stated in his paper “Rule Interchange Format: The Framework” that: “The presentation syntax of RIF … is an abstract syntax and, as such, it omits certain details that might be important for unambiguous parsing.” ·      The grammar cannot differentiate unambiguously between strategies and priorities on groups. A processor is forced to resolve this by detecting the use of IRIs and integers. This could easily be fixed in the grammar.   ·      The grammar cannot unambiguously parse the ‘->’ operator in frames. Specifically, ‘-’ characters are allowed in PN_LOCAL names and hence a parser cannot determine if ‘status->’ is (‘status’ ‘->’) or (‘status-’ ‘>’).   One way to fix this is to amend the PN_LOCAL production as follows: PN_LOCAL ::= ( PN_CHARS_U | [0-9] ) ((PN_CHARS|'.')* ((PN_CHARS)-('-')))? However, unilaterally changing the definition of this production, which is defined in the SPARQL Query Language for RDF specification, makes me uncomfortable. ·      I assume that the presentation syntax is case-sensitive. I couldn’t find this stated anywhere in the documentation, but function/predicate names do appear to be documented as being case-sensitive. ·      The EBNF does not specify whitespace handling. A couple of productions (RULE and ACTION_BLOCK) are crafted to enforce the use of whitespace. This is not necessary. It seems inconsistent with the rest of the specification and can cause parsing issues. In addition, the Const production exhibits whitespaces issues. The intention may have been to disallow the use of whitespace around ‘^^’, but any direct implementation of the EBNF will probably allow whitespace between ‘^^’ and the SYMSPACE. Of course, I am being a little nit-picking about all this. On the whole, the EBNF translated very smoothly and directly to ‘M’ (MGrammar) and proved to be fairly complete. I have encountered far worse issues when translating other EBNF specifications into usable grammars.   I can’t imagine there would be any difficulty in implementing the same grammar in Antlr, COCO/R, gppg, XText, Bison, etc. A general observation, which repeats a point made above, is that the use of parenthesis in the presentation syntax can feel inconsistent and un-intuitive.   It isn’t actually inconsistent, but I think the presentation syntax could be improved by adopting braces, rather than parenthesis, to delimit subordinate syntax elements in a similar way to so many programming languages. The familiarity of braces would communicate the structure of the syntax more clearly to people like me.  If braces were adopted, parentheses could be retained around ‘var (frame | ‘new()’) constructs in action blocks. This use of parenthesis feels very LISP-like, and I think that this is my issue. It’s as if the presentation syntax represents the deformed love-child of LISP and C. In some places (specifically, action blocks), parenthesis is used in a LISP-like fashion. In other places it is used like braces in C. I find this quite confusing. Here is a corrected version of the running example (Example 9.1) in compliant presentation syntax: Document(    Prefix( ex1 <http://example.com/2009/prd2> )    (* ex1:CheckoutRuleset *)  Group rif:forwardChaining (     (* ex1:GoldRule *)    Group 10 (      Forall ?customer such that And(?customer # ex1:Customer                                     ?customer[ex1:status->"Silver"])        (Forall ?shoppingCart such that ?customer[ex1:shoppingCart->?shoppingCart]           (If Exists ?value (And(?shoppingCart[ex1:value->?value]                                  External(pred:numeric-greater-than-or-equal(?value 2000))))            Then Do(Modify(?customer[ex1:status->"Gold"])))))      (* ex1:DiscountRule *)    Group (      Forall ?customer such that ?customer # ex1:Customer        (If Or( ?customer[ex1:status->"Silver"]                ?customer[ex1:status->"Gold"])         Then Do ((?s ?customer[ex1:shoppingCart-> ?s])                  (?v ?s[ex1:value->?v])                  Modify(?s [ex1:value->External(func:numeric-multiply (?v 0.95))]))))      (* ex1:NewCustomerAndWidgetRule *)    Group (      Forall ?customer such that And(?customer # ex1:Customer                                     ?customer[ex1:status->"New"] )        (If Exists ?shoppingCart ?item                   (And(?customer[ex1:shoppingCart->?shoppingCart]                        ?shoppingCart[ex1:containsItem->?item]                        ?item # ex1:Widget ) )         Then Do( (?s ?customer[ex1:shoppingCart->?s])                  (?val ?s[ex1:value->?val])                  (?voucher ?customer[ex1:voucher->?voucher])                  Retract(?customer[ex1:voucher->?voucher])                  Retract(?voucher)                  Modify(?s[ex1:value->External(func:numeric-multiply(?val 0.90))]))))      (* ex1:UnknownStatusRule *)    Group (      Forall ?customer such that ?customer # ex1:Customer        (If Not(Exists ?status                       (And(?customer[ex1:status->?status]                            External(pred:list-contains(List("New" "Bronze" "Silver" "Gold") ?status)) )))         Then Do( Execute(act:print(External(func:concat("New customer: " ?customer))))                  Assert(?customer[ex1:status->"New"]))))  ) )   I hope that helps someone out there :-)

  Read the article

• H1 Visa interview tips–What you must know before attending the interview?

  - by Gopinath

  USA’s H1 visa allows highly qualified professionals from other countries to work in America. Many IT professionals in India aspire to go to USA on H1 and work for their clients. Recently I had a chance to study H1 visa process to help one of my friends and I would like to share what I learned. With the assumption that your H1 petition is approved and you got an interview scheduled at US Embassy for your visa stamping, here are tips you must know before attending the interview Dress Code – Formals Say no to casuals or any fancy dress when you attend the interview. It’s not a party or friends home you are visiting. Consider H1 Visa interview as your job interview and dress up in formals. There is no option B for your, you must be in formals. A plain formal shirt with a matching pant is suggested for men. Tie and Suit would not be required, but if you are a professional at management level you can consider wearing suit. Women can wear either formal Salwar or formal pant-shirt. Avoid heavy jewellery, wear what is must as per your tradition or culture. Body Language -  Smile on your face Your body language reflects what you are and what’s going on in your mind. Don’t be nervous or restless, be relaxed and wear a beautiful smile on your face. A smile is a curve that sets everything straight. When you are called for the interview, greet the interviewer with a beautiful smile. Say Good Morning/Afternoon/Evening depending on time you are visiting them. Whenever appropriate say Thank You. Generally American professionals are very friendly people and they reciprocate for your greetings. Make sure that you make them comfortable to start the interview. Carry original documents in a separate folder I don’t want to talk much about the documents that are required for your H1B interview as it’s big subject on it’s own and it requires a separate post. I assume that your consultant or employer helped you in gathering all the required documents like – petition, DS 160 forms, education & job related documents, resume, interview call letters, client letters, etc. For all the documents you are going to submit at the interview make sure that you have originals in a separate folder.  If required interviewer may ask you show the originals of any of the document you submitted for visa processing. Don’t mix the original documents with the documents you need to submit for interview. Have a separate folder for them. For those who are going to stamping along with their spouse and children, they need to carry few extra original documents like – marriage certificate, marriage photos(30 numbers)/album, birth certificates, passports, education and profession related certificates of the spouse and children. Know your role & responsibilities The interviewer will ask you questions on your roles and responsibilities at client location. Be clear what is your day to day tasks at client place and prepared to face detailed questions on the same. When asked explain clearly and also make sure what you say is inline with what is mentioned in your petition and client invitation letter. At times they may ask you questions specific to the project/technology you are going to work. So doing some homework in this area will help you easily answer the questions. Failing to answer basic questions on your role & responsibilities may result in rejection. You work for your Employer at Client location but NOT FOR CLIENT One of the important things to keep in mind that you work for your employer and you are being deputed to client location on a work visa.  Your employer is going to be solely responsible for your salary, work, promotion, pay hikes or what so ever during your stay at USA. Your client will not be responsible for anything. Lets say you are employed with Company X in India and they are applying for H1B to work at your client(ex: Microsoft) in USA, you must keep in my mind that Microsoft is not your employer. Microsoft will not pay your salaries or responsible for any employment related activities. Company X will be solely responsible for all your employer related activities. If you don’t get this correctly and say to Visa interviewer that your client is responsible, then you may get into troubles. Know your client It’s always good to know the clients with whom you are going to work in USA and their business. If your client is a well know organisation then you may not get many questions from interviewer else you need to be well prepared to provide details like – nature of business, location, size of the organisation, etc.  Get to know the basic details about your client and be confident while providing those details to the interviewer. Also make sure that you never talk about any confidential details of your client projects and business. Revealing confidential details of your client may land your job itself in soup. Make sure that your spouse is also in sync with you If you’ve applied a H4 visa for your spouse along with your H1, make sure that spouse is in sync with you. Your spouse also should know the basic details of your job, your employer, client and location where you will be travelling. Your spouse should also be prepared to answers questions related to marriage, their profession(if working), kids, education, etc. Interviewers will try to asses your spouse communication skills, whereabouts while staying in USA and would they prefer to work USA or not. On H4, which is a dependent visa, your spouse is not allowed to work in USA and at any point your spouse should not show the intentions to search for work in USA. Less luggage more comfort You would have definitely heard that there are lot of restrictions on what you can carry along with you to an US Embassy while attending the interview. To be frank it’s not good to say there are many restrictions, but there are a hell a lot of restrictions. There are unbelievable restrictions and it’s for the safety of everyone. You are not allowed to carry mobile phones, CD/DVDs, USBs, bank cards, cameras, cosmetics, food(except baby food), water, wallets, backpacks, sealed covers, etc. Trust me most of the things we carry with us regularly every day are not allowed inside. As there are 100s of restrictions, it would be easier if you understand what you can carry along with you and just carry them alone. Ask your employer/consultant to provide you a checklist of items that you can carry. Most what you would require are H1B related documents provided by the employer/consultant Photographs All original documents supporting your H1B Passports Some cash for your travel expenses (avoid coins) Any important phone number / details written in a paper(like your cab driver number, etc.) If you carry restricted stuff then you will be stopped at security checks, you have to find people who can safely keep all the restricted items. Due to heavy restrictions in and around the US Embassy you will not find any  place to keep your luggage. So just carry the bare minimum things required so that you feel more comfortable. Useful Links THE U.S. NON IMMIGRANT VISA APPLICATION PROCESS U.S VISA SECURITY REGULATIONS GENERAL FAQS Hope this information is helpful to you and best of luck for your interview. Creative commons Image credit: Flickr/ alexfrance, vinothchandar. hughelectronic, architratan, striatic

  Read the article

• Finally, upgrade from Nokia X3 to Samsung Galaxy S III

  This time, something slightly different but nonetheless not less interesting, hopefully. Living on a remote island like Mauritius, ill-praised 'Cyber Island' in the Indian Ocean, has its advantages in life style and relaxed environment to life in but in terms of technological aspects it can be quite a nightmare. Well, I guess this might be different story to report about... one day. Cyber Island Mauritius Despite it's shiny advertisement as Cyber Island and business in ICT hub to Africa, Mauritius is not on the latest track of available models in computer hardware or, in the context of this article, cellulars or smart-phone, or communication technology in general. Okay, I have to admit that this statement is only partly true. Money can buy, even here in Mauritius. Luckily, there are ways and ways to deal with this outcry of modern, read: technological, civilisation issues. Online shopping you might think? Yes, for sure, until you discover in your checkout procedure that a small island in the Indian Ocean isn't a preferred destination for delivery and the precious time you spent on putting your items into your cart and feeding your personal level of anticipation gets ruined on the last stint. Ordering from abroad saves you money Anyway, I got in touch with my personal courier and luckily there were some extra-kilos left in the luggage. First obstacle sorted, we have a Transporter! Okay, on the next occasion off to Amazon online and using their Prime service for fast delivery. Actually, the order was placed on Saturday evening and everything got delivered on Tuesday morning - nice job in less than 72 hours. Okay, among the items of that shopping rush I ordered a shiny Samsung Galaxy S III 16GB in oceanic blue - did I mention, that you hardly get a blue model in Mauritius? - for my BWE. Interesting side-notes: First, Amazon Germany dropped the prices for roughly 30% on the S3, and we got the 16GB model for less than 500 Euro (or approx. Rs. 19.500,-) compared to the usual Rs. 27.000,- on the local market. It even varies whether the local price is inclusive or exclusive VAT (15%). Second, since a while she was bothering me to get an iPhone and an iPad for her, fair enough I thought, decent hardware, posh design and reliable services. Until we watched the 'magical' introduction of Samsung's new models at the IFA exhibition, she read the bashing comments on Google+ on the iPhone 5 and I gave her a brief summary on the law suit between Apple and Samsung in the USA. So, yes, Samsung USA is right, the next big thing is already here - literally. My BWE loves the look and touch of the Galaxy S3. And for me it was more cost-effective in terms of purchases done at the App Store, ups, Play Store. Transfer of contacts, text messages and media files Okay, now that the hardware is in place, how to transfer all those contacts, text messages, media files, etc. between those two devices? In the past, I used to use the Nokia Communication Suite between various models but now for Android? Well, as usual Google and Bing are reliable friends and among the first hits I came across an article about How to Transfer Contacts from Nokia to Android. Couldn't be easier, right? Well, sort of... my main Windows systems are already running on Windows 8, and this actually caused problems with the mobile/smart-phone device drivers. The article provides the download for an older version 1.10 which upgrades to 2.11 (as time of writing this entry) but both couldn't get the Galaxy S3 and the Nokia connected. Shame on me... the product page clearly doesn't mention Windows 8 (for now) and Windows 8 isn't available for the general audience at all... After I took a spare machine running on Windows Vista everything went smooth. Software installed, upgrade done, device drivers for Android automatically downloaded and installed, and the same painless routine for the Nokia part. I think, I rebooted the system twice during the whole setup procedure but hey, it was more or less a distraction while coding some stuff in ASP.NET MVC and Telerik Kendo UI. The transfer of contacts and text messages was done via Wondershare MobileGo for Android, and all media files by moving the additional microSD card from one device to the other. But even without an external SD card, it would have been very easy to copy the files via Windows Explorer directly. Little catch and excellent service Fine, we are almost done and the only step left is to shift the SIM card... Ouch, gotcha! The X3 uses a standard size SIM card while the S III only accepts microSIM form factor. What an irony, bigger smartphone needs smaller SIM card. Luckily, the next showroom of Emtel is just 5 mins away up the road, and the service staff over there know their job. Finally, after roughly 10 mins of paper work, activation and small chit-chat, the S3 came to life on the mobile network. Owning a smart-phone now and knowing that my BWE would like to interact more on social networks away from home, especially to upload pictures and provide local 'check-ins', I activated a data package for her in advance, too. Even that it is Saturday, everything was already done and ready to be used. Nice bonus: The Emtel clerk directly offered me to set up the configuration for the Emtel data services, yes sure, go ahead, this saves me to search for that in the settings. Okay, spoiler-alert here, setting a static APN to access the Emtel network and the internet wouldn't be a challenge. But hey, she already had the phone in her hands and I could keep my eyes on the children. Well done, Emtel! Resume Thanks to the useful software package by Wondershare is was a hands-free experience to transfer all the data from a Nokia mobile on Symbian S60 to a Samsung Galaxy S III on Android Ice Cream Sandwich (ICS). In the future, this wont be a serious issue at all anymore thanks to synchronisation services and cloud storage. And for now, I'm only waiting for the official upgrades for Jelly Bean.

  Read the article

• Combining Shared Secret and Username Token – Azure Service Bus

  - by Michael Stephenson

  As discussed in the introduction article this walkthrough will explain how you can implement WCF security with the Windows Azure Service Bus to ensure that you can protect your endpoint in the cloud with a shared secret but also flow through a username token so that in your listening WCF service you will be able to identify who sent the message. This could either be in the form of an application or a user depending on how you want to use your token. Prerequisites Before going into the walk through I want to explain a few assumptions about the scenario we are implementing but to keep the article shorter I am not going to walk through all of the steps in how to setup some of this. In the solution we have a simple console application which will represent the client application. There is also the services WCF application which contains the WCF service we will expose via the Windows Azure Service Bus. The WCF Service application in this example was hosted in IIS 7 on Windows 2008 R2 with AppFabric Server installed and configured to auto-start the WCF listening services. I am not going to go through significant detail around the IIS setup because it should not matter in relation to this article however if you want to understand more about how to configure WCF and IIS for such a scenario please refer to the following paper which goes into a lot of detail about how to configure this. The link is: http://tinyurl.com/8s5nwrz   The Service Component To begin with let's look at the service component and how it can be configured to listen to the service bus using a shared secret but to also accept a username token from the client. In the sample the service component is called Acme.Azure.ServiceBus.Poc.UN.Services. It has a single service which is the Visual Studio template for a WCF service when you add a new WCF Service Application so we have a service called Service1 with its Echo method. Nothing special so far!.... The next step is to look at the web.config file to see how we have configured the WCF service. In the services section of the WCF configuration you can see I have created my service and I have created a local endpoint which I simply used to do a little bit of diagnostics and to check it was working, but more importantly there is the Windows Azure endpoint which is using the ws2007HttpRelayBinding (note that this should also work just the same if your using netTcpRelayBinding). The key points to note on the above picture are the service behavior called MyServiceBehaviour and the service bus endpoints behavior called MyEndpointBehaviour. We will go into these in more detail later.   The Relay Binding The relay binding for the service has been configured to use the TransportWithMessageCredential security mode. This is the important bit where the transport security really relates to the interaction between the service and listening to the Azure Service Bus and the message credential is where we will use our username token like we have specified in the message/clientCrentialType attribute. Note also that we have left the relayClientAuthenticationType set to RelayAccessToken. This means that authentication will be made against ACS for accessing the service bus and messages will not be accepted from any sender who has not been authenticated by ACS.   The Endpoint Behaviour In the below picture you can see the endpoint behavior which is configured to use the shared secret client credential for accessing the service bus and also for diagnostic purposes I have included the service registry element. Hopefully if you are familiar with using Windows Azure Service Bus relay feature the above is very familiar to you and this is a very common setup for this section. There is nothing specific to the username token implementation here. The Service Behaviour Now we come to the bit with most of the username token bits in it. When you configure the service behavior I have included the serviceCredentials element and then setup to use userNameAuthentication and you can see that I have created my own custom username token validator.   This setup means that WCF will hand off to my class for validating the username token details. I have also added the serviceSecurityAudit element to give me a simple auditing of access capability. My UsernamePassword Validator The below picture shows you the details of the username password validator class I have implemented. WCF will hand off to this class when validating the token and give me a nice way to check the token credentials against an on-premise store. You have all of the validation features with a non-service bus WCF implementation available such as validating the username password against active directory or ASP.net membership features or as in my case above something much simpler.   The Client Now let's take a look at the client side of this solution and how we can configure the client to authenticate against ACS but also send a username token over to the service component so it can implement additional security checks on-premise. I have a console application and in the program class I want to use the proxy generated with Add Service Reference to send a message via the Azure Service Bus. You can see in my WCF client configuration below I have setup my details for the azure service bus url and am using the ws2007HttpRelayBinding. Next is my configuration for the relay binding. You can see below I have configured security to use TransportWithMessageCredential so we will flow the username token with the message and also the RelayAccessToken relayClientAuthenticationType which means the component will validate against ACS before being allowed to access the relay endpoint to send a message.     After the binding we need to configure the endpoint behavior like in the below picture. This is the normal configuration to use a shared secret for accessing a Service Bus endpoint.   Finally below we have the code of the client in the console application which will call the service bus. You can see that we have created our proxy and then made a normal call to a WCF service but this time we have also set the ClientCredentials to use the appropriate username and password which will be flown through the service bus and to our service which will validate them.     Conclusion As you can see from the above walkthrough it is not too difficult to configure a service to use both a shared secret and username token at the same time. This gives you the power and protection offered by the access control service in the cloud but also the ability to flow additional tokens to the on-premise component for additional security features to be implemented. Sample The sample used in this post is available at the following location: https://s3.amazonaws.com/CSCBlogSamples/Acme.Azure.ServiceBus.Poc.UN.zip

  Read the article

• Per-pixel displacement mapping GLSL

  - by Chris

  Im trying to implement a per-pixel displacement shader in GLSL. I read through several papers and "tutorials" I found and ended up with trying to implement the approach NVIDIA used in their Cascade Demo (http://www.slideshare.net/icastano/cascades-demo-secrets) starting at Slide 82. At the moment I am completly stuck with following problem: When I am far away the displacement seems to work. But as more I move closer to my surface, the texture gets bent in x-axis and somehow it looks like there is a little bent in general in one direction. EDIT: I added a video: click I added some screen to illustrate the problem: Well I tried lots of things already and I am starting to get a bit frustrated as my ideas run out. I added my full VS and FS code: VS: #version 400 layout(location = 0) in vec3 IN_VS_Position; layout(location = 1) in vec3 IN_VS_Normal; layout(location = 2) in vec2 IN_VS_Texcoord; layout(location = 3) in vec3 IN_VS_Tangent; layout(location = 4) in vec3 IN_VS_BiTangent; uniform vec3 uLightPos; uniform vec3 uCameraDirection; uniform mat4 uViewProjection; uniform mat4 uModel; uniform mat4 uView; uniform mat3 uNormalMatrix; out vec2 IN_FS_Texcoord; out vec3 IN_FS_CameraDir_Tangent; out vec3 IN_FS_LightDir_Tangent; void main( void ) { IN_FS_Texcoord = IN_VS_Texcoord; vec4 posObject = uModel * vec4(IN_VS_Position, 1.0); vec3 normalObject = (uModel * vec4(IN_VS_Normal, 0.0)).xyz; vec3 tangentObject = (uModel * vec4(IN_VS_Tangent, 0.0)).xyz; //vec3 binormalObject = (uModel * vec4(IN_VS_BiTangent, 0.0)).xyz; vec3 binormalObject = normalize(cross(tangentObject, normalObject)); // uCameraDirection is the camera position, just bad named vec3 fvViewDirection = normalize( uCameraDirection - posObject.xyz); vec3 fvLightDirection = normalize( uLightPos.xyz - posObject.xyz ); IN_FS_CameraDir_Tangent.x = dot( tangentObject, fvViewDirection ); IN_FS_CameraDir_Tangent.y = dot( binormalObject, fvViewDirection ); IN_FS_CameraDir_Tangent.z = dot( normalObject, fvViewDirection ); IN_FS_LightDir_Tangent.x = dot( tangentObject, fvLightDirection ); IN_FS_LightDir_Tangent.y = dot( binormalObject, fvLightDirection ); IN_FS_LightDir_Tangent.z = dot( normalObject, fvLightDirection ); gl_Position = (uViewProjection*uModel) * vec4(IN_VS_Position, 1.0); } The VS just builds the TBN matrix, from incoming normal, tangent and binormal in world space. Calculates the light and eye direction in worldspace. And finally transforms the light and eye direction into tangent space. FS: #version 400 // uniforms uniform Light { vec4 fvDiffuse; vec4 fvAmbient; vec4 fvSpecular; }; uniform Material { vec4 diffuse; vec4 ambient; vec4 specular; vec4 emissive; float fSpecularPower; float shininessStrength; }; uniform sampler2D colorSampler; uniform sampler2D normalMapSampler; uniform sampler2D heightMapSampler; in vec2 IN_FS_Texcoord; in vec3 IN_FS_CameraDir_Tangent; in vec3 IN_FS_LightDir_Tangent; out vec4 color; vec2 TraceRay(in float height, in vec2 coords, in vec3 dir, in float mipmap){ vec2 NewCoords = coords; vec2 dUV = - dir.xy * height * 0.08; float SearchHeight = 1.0; float prev_hits = 0.0; float hit_h = 0.0; for(int i=0;i<10;i++){ SearchHeight -= 0.1; NewCoords += dUV; float CurrentHeight = textureLod(heightMapSampler,NewCoords.xy, mipmap).r; float first_hit = clamp((CurrentHeight - SearchHeight - prev_hits) * 499999.0,0.0,1.0); hit_h += first_hit * SearchHeight; prev_hits += first_hit; } NewCoords = coords + dUV * (1.0-hit_h) * 10.0f - dUV; vec2 Temp = NewCoords; SearchHeight = hit_h+0.1; float Start = SearchHeight; dUV *= 0.2; prev_hits = 0.0; hit_h = 0.0; for(int i=0;i<5;i++){ SearchHeight -= 0.02; NewCoords += dUV; float CurrentHeight = textureLod(heightMapSampler,NewCoords.xy, mipmap).r; float first_hit = clamp((CurrentHeight - SearchHeight - prev_hits) * 499999.0,0.0,1.0); hit_h += first_hit * SearchHeight; prev_hits += first_hit; } NewCoords = Temp + dUV * (Start - hit_h) * 50.0f; return NewCoords; } void main( void ) { vec3 fvLightDirection = normalize( IN_FS_LightDir_Tangent ); vec3 fvViewDirection = normalize( IN_FS_CameraDir_Tangent ); float mipmap = 0; vec2 NewCoord = TraceRay(0.1,IN_FS_Texcoord,fvViewDirection,mipmap); //vec2 ddx = dFdx(NewCoord); //vec2 ddy = dFdy(NewCoord); vec3 BumpMapNormal = textureLod(normalMapSampler, NewCoord.xy, mipmap).xyz; BumpMapNormal = normalize(2.0 * BumpMapNormal - vec3(1.0, 1.0, 1.0)); vec3 fvNormal = BumpMapNormal; float fNDotL = dot( fvNormal, fvLightDirection ); vec3 fvReflection = normalize( ( ( 2.0 * fvNormal ) * fNDotL ) - fvLightDirection ); float fRDotV = max( 0.0, dot( fvReflection, fvViewDirection ) ); vec4 fvBaseColor = textureLod( colorSampler, NewCoord.xy,mipmap); vec4 fvTotalAmbient = fvAmbient * fvBaseColor; vec4 fvTotalDiffuse = fvDiffuse * fNDotL * fvBaseColor; vec4 fvTotalSpecular = fvSpecular * ( pow( fRDotV, fSpecularPower ) ); color = ( fvTotalAmbient + (fvTotalDiffuse + fvTotalSpecular) ); } The FS implements the displacement technique in TraceRay method, while always using mipmap level 0. Most of the code is from NVIDIA sample and another paper I found on the web, so I guess there cannot be much wrong in here. At the end it uses the modified UV coords for getting the displaced normal from the normal map and the color from the color map. I looking forward for some ideas. Thanks in advance! Edit: Here is the code loading the heightmap: glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, mWidth, mHeight, 0, GL_RGBA, GL_UNSIGNED_BYTE, mImageData); glGenerateMipmap(GL_TEXTURE_2D); //glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR_MIPMAP_LINEAR); //glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR_MIPMAP_LINEAR); //glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT); //glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT); Maybe something wrong in here?

  Read the article

• To SYNC or not to SYNC – Part 3

  - by AshishRay

  I can't believe it has been almost a year since my last blog post. I know, that's an absolute no-no in the blogosphere. And I know that "I have been busy" is not a good excuse. So - without trying to come up with an excuse - let me state this - my apologies for taking such a long time to write the next Part. Without further ado, here goes. This is Part 3 of a multi-part blog article where we are discussing various aspects of setting up Data Guard synchronous redo transport (SYNC). In Part 1 of this article, I debunked the myth that Data Guard SYNC is similar to a two-phase commit operation. In Part 2, I discussed the various ways that network latency may or may not impact a Data Guard SYNC configuration. In this article, I will talk in details regarding why Data Guard SYNC is a good thing. I will also talk about distance implications for setting up such a configuration. So, Why Good? Why is Data Guard SYNC a good thing? Because, at the end of the day, this gives you the assurance of zero data loss - it doesn’t matter what outage may befall your primary system. Befall! Boy, that sounds theatrical. But seriously - think about this - it minimizes your data risks. That’s a big deal. Whether you have an outage due to bad disks, faulty hardware components, hardware / software bugs, physical data corruptions, power failures, lightning that takes out significant part of your data center, fire that melts your assets, water leakage from the cooling system, human errors such as accidental deletion of online redo log files - it doesn’t matter - you can have that “Om - peace” look on your face and then you can failover to the standby system, without losing a single bit of data in your Oracle database. You will be a hero, as shown in this not so imaginary conversation: IT Manager: Well, what’s the status? You: John is doing the trace analysis on the storage array. IT Manager: So? How long is that gonna take? You: Well, he is stuck, waiting for a response from <insert your not-so-favorite storage vendor here>. IT Manager: So, no root cause yet? You: I told you, he is stuck. We have escalated with their Support, but you know how long these things take. IT Manager: Darn it - the site is down! You: Not really … IT Manager: What do you mean? You: John is stuck, but Sreeni has already done a failover to the Data Guard standby. IT Manager: Whoa, whoa - wait! Failover means we lost some data, why did you do this without letting the Business group know? You: We didn’t lose any data. Remember, we had set up Data Guard with SYNC? So now, any problems on the production – we just failover. No data loss, and we are up and running in minutes. The Business guys don’t need to know. IT Manager: Wow! Are we great or what!! You: I guess … Ok, so you get it - SYNC is good. But as my dear friend Larry Carpenter says, “TANSTAAFL”, or "There ain't no such thing as a free lunch". Yes, of course - investing in Data Guard SYNC means that you have to invest in a low-latency network, you have to monitor your applications and database especially in peak load conditions, and you cannot under-provision your standby systems. But all these are good and necessary things, if you are supporting mission-critical apps that are supposed to be running 24x7. The peace of mind that this investment will give you is priceless, especially if you are serious about HA. How Far Can We Go? Someone may say at this point - well, I can’t use Data Guard SYNC over my coast-to-coast deployment. Most likely - true. So how far can you go? Well, we have customers who have deployed Data Guard SYNC over 300+ miles! Does this mean that you can also deploy over similar distances? Duh - no! I am going to say something here that most IT managers don’t like to hear - “It depends!” It depends on your application design, application response time / throughput requirements, network topology, etc. However, because of the optimal way we do SYNC, customers have been able to stretch Data Guard SYNC deployments over longer distances compared to traditional, storage-centric ways of doing this. The MAA Database 10.2 best practices paper Data Guard Redo Transport & Network Configuration, and Oracle Database 11.2 High Availability Best Practices Manual talk about some of these SYNC-related metrics. For example, a test deployment of Data Guard SYNC over 330 miles with 10ms latency showed an impact less than 5% for a busy OLTP application. Even if you can’t deploy Data Guard SYNC over your WAN distance, or if you already have an ASYNC standby located 1000-s of miles away, here’s another nifty way to boost your HA. Have a local standby, configured SYNC. How local is “local”? Again - it depends. One customer runs a local SYNC standby across the campus. Another customer runs it across 15 miles in another data center. Both of these customers are running Data Guard SYNC as their HA standard. If a localized outage affects their primary system, no problem! They have all the data available on the standby, to which they can failover. Very fast. In seconds. Wait - did I say “seconds”? Yes, Virginia, there is a Santa Claus. But you have to wait till the next blog article to find out more. I assure you tho’ that this time you won’t have to wait for another year for this.

  Read the article

• CodePlex Daily Summary for Saturday, March 24, 2012

  CodePlex Daily Summary for Saturday, March 24, 2012Popular Releasesmenu4web: menu4web 0.0.3: menu4web 0.0.3Craig's Utility Library: Craig's Utility Library 3.1: This update adds about 60 new extension methods, a couple of new classes, and a number of fixes including: Additions Added DateSpan class Added GenericDelimited class Random additions Added static thread friendly version of Random.Next called ThreadSafeNext. AOP Manager additions Added Destroy function to AOPManager (clears out all data so system can be recreated. Really only useful for testing...) ORM additions Added PagedCommand and PageCount functions to ObjectBaseClass (same as M...SQL Monitor - managing sql server performance: SQLMon 4.2 alpha 14: 1. improved accuracy of logic fault checking in analysisMapWindow 6 Desktop GIS: MapWindow 6.1.1: MapWindow 6 Desktop GIS is an open source desktop GIS for Microsoft Windows that is built upon the DotSpatial Library. This release requires .Net 4 (Client Profile). Are you a software developer?Instead of downloading MapWindow for development purposes, get started with with the DotSpatial templateDotSpatial: DotSpatial 1.1: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components are available as NuGet pa...Indiefreaks Game Framework: 0.9.2.0: Feature: Added SunBurn engine v2.0.18.7 support (doesn't support versions below). Feature: Added GammaCorrection Post processor to allow developers or even players to tweak the Gamma of the game depending on their screen (courtesy of bamyazi) Feature: Added Windows, Xbox 360 & WP7 enabled StorageManager (based on Nick Gravelyn's EasyStorage) to read/write files for player or game data. Feature: Added VirtualGamePad feature for WP7 allowing developers to define Touch areas on screen and mapped...Code for Rapid C# Windows Development eBook + LINQPad and Data Tools: LLBLGen LINQPad Data Context Driver Version 2.1: Sixth release of a LLBLGen Pro Typed Data Context Driver for LINQPad. For LLBLGen Pro versions 3.1 and 3.5(coming). New features:When you switch the query language to SQL, LINQPad updates the Schema Explorer to show SQL column names rather than CLR property names Connection dialog unloads assemblies when it has closed down so they are no longer locked - this allows them to be rebuilt while LINQPad is still open Connection dialog includes a button to quickly add assemblies needed for the...People's Note: People's Note 0.40: Version 0.40 adds an option to compact the database from the profile screen. Compacting a database can make it smaller and faster by removing empty spaces left over by editing, moving, and deleting notes. To install: copy the appropriate CAB file onto your WM device and run it.Microsoft All-In-One Code Framework - a centralized code sample library: C++, .NET Coding Guideline: Microsoft All-In-One Code Framework Coding Guideline This document describes the coding style guideline for native C++ and .NET (C# and VB.NET) programming used by the Microsoft All-In-One Code Framework project team.WebDAV for WHS: Version 1.0.67: - Added: Check whether the Remote Web Access is turned on or not; - Added: Check for Add-In updates;Image 3D Viewer: Image 3D Viewer: WPF .Net 3.5 .Net 4 .Net 4.5Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (March 2012) for .NET 4.0: March release of Phalanger 3.0 significantly enhances performance, adds new features and fixes many issues. See following for the list of main improvements: New features: Phalanger Tools installable for Visual Studio 2011 Beta "filter" extension with several most used filters implemented DomDocument HTML parser, loadHTML() method mail() PHP compatible function PHP 5.4 T_CALLABLE token PHP 5.4 "callable" type hint PCRE: UTF32 characters in range support configuration supports <c...Nearforums - ASP.NET MVC forum engine: Nearforums v8.0: Version 8.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Internationalization Custom authentication provider Access control list for forums and threads Webdeploy package checksum: abc62990189cf0d488ef915d4a55e4b14169bc01 Visit Roadmap for more details.BIDS Helper: BIDS Helper 1.6: This beta release is the first to support SQL Server 2012 (in addition to SQL Server 2005, 2008, and 2008 R2). Since it is marked as a beta release, we are looking for bug reports in the next few months as you use BIDS Helper on real projects. In addition to getting all existing BIDS Helper functionality working appropriately in SQL Server 2012 (SSDT), the following features are new... Analysis Services Tabular Smart Diff Tabular Actions Editor Tabular HideMemberIf Tabular Pre-Build ...Json.NET: Json.NET 4.5 Release 1: New feature - Windows 8 Metro build New feature - JsonTextReader automatically reads ISO strings as dates New feature - Added DateFormatHandling to control whether dates are written in the MS format or ISO format, with ISO as the default New feature - Added DateTimeZoneHandling to control reading and writing DateTime time zone details New feature - Added async serialize/deserialize methods to JsonConvert New feature - Added Path to JsonReader/JsonWriter/ErrorContext and exceptions w...SCCM Client Actions Tool: SCCM Client Actions Tool v1.11: SCCM Client Actions Tool v1.11 is the latest version. It comes with following changes since last version: Fixed a bug when ping and cmd.exe kept running in endless loop after action progress was finished. Fixed update checking from Codeplex RSS feed. The tool is downloadable as a ZIP file that contains four files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA...WebSocket4Net: WebSocket4Net 0.5: Changes in this release fixed the wss's default port bug improved JsonWebSocket supported set client access policy protocol for silverlight fixed a handshake issue in Silverlight fixed a bug that "Host" field in handshake hadn't contained port if the port is not default supported passing in Origin parameter for handshaking supported reacting pings from server side fixed a bug in data sending fixed the bug sending a closing handshake with no message which would cause an excepti...SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.5: Changes included in this release: supported closing handshake queue checking improved JSON subprotocol supported sending ping from server to client fixed a bug about sending a closing handshake with no message refactored the code to improve protocol compatibility fixed a bug about sub protocol configuration loading in Mono improved BasicSubProtocol added JsonWebSocketSessionSurvey™ - web survey & form engine: Survey™ 2.0: The new stable Survey™ Project 2.0.0.1 version contains many new features like: Technical changes: - Use of Jquery, ASTreeview, Tabs, Tooltips and new menuprovider Features & Bugfixes: Survey list and search function Folder structure for surveys New Menustructure Library list New Library fields User list and search functions Layout options for a survey with CSS, page header and footer New IP filter security feature Enhanced Token Management New Question fields as ID, Alias...Speed up Printer migration using PrintBrm and it's configuration files: BRMC.EXE: Run the tool from the extracted directory of the printbrm backup. You can use the following command to extract a backup file to a directory - PRINTBRM.EXE -R -D C:\TEMP\EXPAND -F C:\TEMP\PRINTERBACKUP.PRINTEREXPORTNew ProjectsAsp.NET Url Router: 1.Url rewritting. 2.Provider regex matcher 3.Support custom url validate handler.BC-Web: ch projectCape: Dynamically generates Capistrano recipes for Rake tasks.cstgamebgs: Project for wp7GCalculator: GCalculator for performing basic arithmetic operations. Windows Sidebar Gadget invacc: Invacc- for inventory and Account Onlineirgsh-node: Worker nodes of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/irgsh-repo: Repository manager node of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/irgsh-web: Web interface and task manager of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/Kinect Explorer For SharePoint 2010: Kinect Explorer for SharePoint is a tool which provide Natural User Interface to browse through SharePoint sites. Use body gestures to browse, read, move, copy documents. Use Speech services to read-out the files.MCU: mcu devMVC3ShellCode: MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode NetWatch: NetWatch - network watchdog Small application primary designed for network connectivity monitoring. You can configure set of network tests (ping, http, ...) and time plan for this tests. Application is running in windows notification area and notife you each problem. NMortgage: The goal of this project will be to give a prospective home buyer or an existing home owner the insight they need to explore effects of different repayment strategies or different mortgage structures. Nucleo.NET MVP: The Nucleo MVP framework provides a Model-View-Presenter approach that isn't obtrusive, can be utilized in multiple environments, and is versatile. Providing a lot of features you see in other frameworks, the Nucleo MVP framework provides many extensibility points, pretty much allowing you to rewrite most of the framework. It features dynamic injection support, presenter and view initializers (like what you see in ASP.NET MVC), model property injection, attribute- and convention-based vie...P2PShare: This project is to build a new and moden System for p2p file shearing supporting downloads from HTTP, HTTPS, FTP support for P2Pshare client list servers so files can point to a server or a host only file so no servers are used and only p2p is usedPipeLayer: proyecto de sistemas inteligentespython-irgsh: Python library for BlankOn Package Factory - http://irgsh.blankonlinux.or.id/RamGec XNA Controls - Window Elements Library for XNA Solutions: Lightweight, ultra-high performance and flexible library for displaying and managing Window Controls for XNA system. Features its own Window Designer for creating custom windows and controls.RPG Character Generators and Tools: Various tools for pen and paper style role playing games.Screen scraper: A program that can be used to download public domain MP3 and other media such as pdf documents.SharePoint Bdc request library: The given set of classes simplifies an access to the external data, which can be reached through BDC. The library allows to make simple requests for values from external data source, using a BDC Entity Instance Identifier(s) or a value of a certain BDC Entity field. Developed to interact with Business Data Connectivity of SharePoint 2010.testtom03232012git01: testtom03232012git01testtom03232012git02: testtom03232012git02the north star uc: University projectTyphon: Typhon is a role playing simulation management application, much like Nova, but written in MVC/C#.VRE LabTrove-SharePoint connector: The VRE LabTrove-SharePoint Connector provides a means of integrating the ability to view, post to, and edit posts stored in a LabTrove electronic laboratory notebook from within the familiar environment of Microsoft SharePoint. Once installed and configured, these Web Parts give SharePoint users a straightforward way to interact with any LabTrove installation that they wish to use. They also facilitate users to attach data that is stored in a SharePoint Document Library to the LabTrove posts...

  Read the article

• BI Applications overview

  - by sv744

  Welcome to Oracle BI applications blog! This blog will talk about various features, general roadmap, description of functionality and implementation steps related to Oracle BI applications. In the first post we start with an overview of the BI apps and will delve deeper into some of the topics below in the upcoming weeks and months. If there are other topics you would like us to talk about, pl feel free to provide feedback on that. The Oracle BI applications are a set of pre-built applications that enable pervasive BI by providing role-based insight for each functional area, including sales, service, marketing, contact center, finance, supplier/supply chain, HR/workforce, and executive management. For example, Sales Analytics includes role-based applications for sales executives, sales management, as well as front-line sales reps, each of whom have different needs. The applications integrate and transform data from a range of enterprise sources—including Siebel, Oracle, PeopleSoft, SAP, and others—into actionable intelligence for each business function and user role. This blog  starts with the key benefits and characteristics of Oracle BI applications. In a series of subsequent blogs, each of these points will be explained in detail. Why BI apps? Demonstrate the value of BI to a business user, show reports / dashboards / model that can answer their business questions as part of the sales cycle. Demonstrate technical feasibility of BI project and significantly lower risk and improve success Build Vs Buy benefit Don’t have to start with a blank sheet of paper. Help consolidate disparate systems Data integration in M&A situations Insulate BI consumers from changes in the OLTP Present OLTP data and highlight issues of poor data / missing data – and improve data quality and accuracy Prebuilt Integrations BI apps support prebuilt integrations against leading ERP sources: Fusion Applications, E- Business Suite, Peoplesoft, JD Edwards, Siebel, SAP Co-developed with inputs from functional experts in BI and Applications teams. Out of the box dimensional model to source model mappings Multi source and Multi Instance support Rich Data Model    BI apps have a very rich dimensionsal data model built over 10 years that incorporates best practises from BI modeling perspective as well as reflect the source system complexities  Thanks for reading a long post, and be on the lookout for future posts.  We will look forward to your valuable feedback on these topics as well as suggestions on what other topics would you like us to cover. I Conformed dimensional model across all business subject areas allows cross functional reporting, e.g. customer / supplier 360 Over 360 fact tables across 7 product areas CRM – 145, SCM – 47, Financials – 28, Procurement – 20, HCM – 27, Projects – 18, Campus Solutions – 21, PLM - 56 Supported by 300 physical dimensions Support for extensive calendars; Gregorian, enterprise and ledger based Conformed data model and metrics for real time vs warehouse based reporting  Multi-tenant enabled Extensive BI related transformations BI apps ETL and data integration support various transformations required for dimensional models and reporting requirements. All these have been distilled into common patterns and abstracted logic which can be readily reused across different modules Slowly Changing Dimension support Hierarchy flattening support Row / Column Hybrid Hierarchy Flattening As Is vs. As Was hierarchy support Currency Conversion :-  Support for 3 corporate, CRM, ledger and transaction currencies UOM conversion Internationalization / Localization Dynamic Data translations Code standardization (Domains) Historical Snapshots Cycle and process lifecycle computations Balance Facts Equalization of GL accounting chartfields/segments Standardized values for categorizing GL accounts Reconciliation between GL and subledgers to track accounted/transferred/posted transactions to GL Materialization of data only available through costly and complex APIs e.g. Fusion Payroll, EBS / Fusion Accruals Complex event Interpretation of source data – E.g. o    What constitutes a transfer o    Deriving supervisors via position hierarchy o    Deriving primary assignment in PSFT o    Categorizing and transposition to measures of Payroll Balances to specific metrics to support side by side comparison of measures of for example Fixed Salary, Variable Salary, Tax, Bonus, Overtime Payments. o    Counting of Events – E.g. converting events to fact counters so that for example the number of hires can easily be added up and compared alongside the total transfers and terminations. Multi pass processing of multiple sources e.g. headcount, salary, promotion, performance to allow side to side comparison. Adding value to data to aid analysis through banding, additional domain classifications and groupings to allow higher level analytical reporting and data discovery Calculation of complex measures examples: o    COGs, DSO, DPO, Inventory turns  etc o    Transfers within a Hierarchy or out of / into a hierarchy relative to view point in hierarchy. Configurability and Extensibility support  BI apps offer support for extensibility for various entities as automated extensibility or part of extension methodology Key Flex fields and Descriptive Flex support  Extensible attribute support (JDE)  Conformed Domains ETL Architecture BI apps offer a modular adapter architecture which allows support of multiple product lines into a single conformed model Multi Source Multi Technology Orchestration – creates load plan taking into account task dependencies and customers deployment to generate a plan based on a customers of multiple complex etl tasks Plan optimization allowing parallel ETL tasks Oracle: Bit map indexes and partition management High availability support    Follow the sun support. TCO BI apps support several utilities / capabilities that help with overall total cost of ownership and ensure a rapid implementation Improved cost of ownership – lower cost to deploy On-going support for new versions of the source application Task based setups flows Data Lineage Functional setup performed in Web UI by Functional person Configuration Test to Production support Security BI apps support both data and object security enabling implementations to quickly configure the application as per the reporting security needs Fine grain object security at report / dashboard and presentation catalog level Data Security integration with source systems  Extensible to support external data security rules Extensive Set of KPIs Over 7000 base and derived metrics across all modules Time series calculations (YoY, % growth etc) Common Currency and UOM reporting Cross subject area KPIs (analyzing HR vs GL data, drill from GL to AP/AR, etc) Prebuilt reports and dashboards 3000+ prebuilt reports supporting a large number of industries Hundreds of role based dashboards Dynamic currency conversion at dashboard level Highly tuned Performance The BI apps have been tuned over the years for both a very performant ETL and dashboard performance. The applications use best practises and advanced database features to enable the best possible performance. Optimized data model for BI and analytic queries Prebuilt aggregates& the ability for customers to create their own aggregates easily on warehouse facts allows for scalable end user performance Incremental extracts and loads Incremental Aggregate build Automatic table index and statistics management Parallel ETL loads Source system deletes handling Low latency extract with Golden Gate Micro ETL support Bitmap Indexes Partitioning support Modularized deployment, start small and add other subject areas seamlessly Source Specfic Staging and Real Time Schema Support for source specific operational reporting schema for EBS, PSFT, Siebel and JDE Application Integrations The BI apps also allow for integration with source systems as well as other applications that provide value add through BI and enable BI consumption during operational decision making Embedded dashboards for Fusion, EBS and Siebel applications Action Link support Marketing Segmentation Sales Predictor Dashboard Territory Management External Integrations The BI apps data integration choices include support for loading extenral data External data enrichment choices : UNSPSC, Item class etc. Extensible Spend Classification Broad Deployment Choices Exalytics support Databases :  Oracle, Exadata, Teradata, DB2, MSSQL ETL tool of choice : ODI (coming), Informatica Extensible and Customizable Extensible architecture and Methodology to add custom and external content Upgradable across releases

  Read the article

• Benefits of Behavior Driven Development

  - by Aligned

  Originally posted on: http://geekswithblogs.net/Aligned/archive/2013/07/26/benefits-of-behavior-driven-development.aspxContinuing my previous article on BDD, I wanted to point out some benefits of BDD and since BDD is an extension of Test Driven Development (TDD), you get those as well. I’ll add another article on some possible downsides of this approach. There are many articles about the benefits of TDD and they apply to BDD. I’ve pointed out some here and copied some of the main points for each article, but there are many more including the book The Art of Unit Testing by Roy Osherove. http://geekswithblogs.net/leesblog/archive/2008/04/30/the-benefits-of-test-driven-development.aspx (Lee Brandt) Stability Accountability Design Ability Separated Concerns Progress Indicator http://tddftw.com/benefits-of-tdd/ Help maintainers understand the intention behind the code Bring validation and proper data handling concerns to the forefront. Writing the tests first is fun. Better APIs come from writing testable code. TDD will make you a better developer. http://www.slideshare.net/dhelper/benefit-from-unit-testing-in-the-real-world (from Typemock). Take a look at the slides, especially the extra time required for TDD (slide 10) and the next one of the bugs avoided using TDD (slide 11). Less bugs (slide 11) about testing and development (13) Increase confidence in code (14) Fearlessly change your code (14) Document Requirements (14) also see http://visualstudiomagazine.com/articles/2013/06/01/roc-rocks.aspx Discover usability issues early (14) All these points and articles are great and there are many more. The following are my additions to the benefits of BDD from using it in real projects for my company. July 2013 on MSDN - Behavior-Driven Design with SpecFlow Scott Allen did a very informative TDD and MVC module, but to me he is doing BDDCompile and Execute Requirements in Microsoft .NET ~ Video from TechEd 2012 Communication I was working through a complicated task that the decision tree kept growing. After writing out the Given, When, Then of the scenario, I was able tell QA what I had worked through for their initial test cases. They were able to add from there. It is also useful to use this language with other developers, managers, or clients to help make informed decisions on if it meets the requirements or if it can simplified to save time (money). Thinking through solutions, before starting to code This was the biggest benefit to me. I like to jump into coding to figure out the problem. Many times I don't understand my path well enough and have to do some parts over. A past supervisor told me several times during reviews that I need to get better at seeing "the forest for the trees". When I sit down and write out the behavior that I need to implement, I force myself to think things out further and catch scenarios before they get to QA. A co-worker that is new to BDD and we’ve been using it in our new project for the last 6 months, said “It really clarifies things”. It took him awhile to understand it all, but now he’s seeing the value of this approach (yes there are some downsides, but that is a different issue). Developers’ Confidence This is huge for me. With tests in place, my confidence grows that I won’t break code that I’m not directly changing. In the past, I’ve worked on projects with out tests and we would frequently find regression bugs (or worse the users would find them). That isn’t fun. We don’t catch all problems with the tests, but when QA catches one, I can write a test to make sure it doesn’t happen again. It’s also good for Releasing code, telling your manager that it’s good to go. As time goes on and the code gets older, how confident are you that checking in code won’t break something somewhere else? Merging code - pre release confidence If you’re merging code a lot, it’s nice to have the tests to help ensure you didn’t merge incorrectly. Interrupted work I had a task that I started and planned out, then was interrupted for a month because of different priorities. When I started it up again, and un-shelved my changes, I had the BDD specs and it helped me remember what I had figured out and what was left to do. It would have much more difficult without the specs and tests. Testing and verifying complicated scenarios Sometimes in the UI there are scenarios that get tricky, because there are a lot of steps involved (click here to open the dialog, enter the information, make sure it’s valid, when I click cancel it should do {x}, when I click ok it should close and do {y}, then do this, etc….). With BDD I can avoid some of the mouse clicking define the scenarios and have them re-run quickly, without using a mouse. UI testing is still needed, but this helps a bunch. The same can be true for tricky server logic. Documentation of Assumptions and Specifications The BDD spec tests (Jasmine or SpecFlow or other tool) also work as documentation and show what the original developer was trying to accomplish. It’s not a different Word document, so developers will keep this up to date, instead of letting it become obsolete. What happens if you leave the project (consulting, new job, etc) with no specs or at the least good comments in the code? Sometimes I think of a new scenario, so I add a failing spec and continue in the same stream of thought (don’t forget it because it was on a piece of paper or in a notepad). Then later I can come back and handle it and have it documented. Jasmine tests and JavaScript –> help deal with the non-typed system I like JavaScript, but I also dislike working with JavaScript. I miss C# telling me if a property doesn’t actually exist at build time. I like the idea of TypeScript and hope to use it more in the future. I also use KnockoutJs, which has observables that need to be called with ending (), since the observable is a function. It’s hard to remember when to use () or not and the Jasmine specs/tests help ensure the correct usage.   This should give you an idea of the benefits that I see in using the BDD approach. I’m sure there are more. It talks a lot of practice, investment and experimentation to figure out how to approach this and to get comfortable with it. I agree with Scott Allen in the video I linked above “Remember that TDD can take some practice. So if you're not doing test-driven design right now? You can start and practice and get better. And you'll reach a point where you'll never want to get back.”

  Read the article

• Combining Shared Secret and Certificates

  - by Michael Stephenson

  As discussed in the introduction article this walkthrough will explain how you can implement WCF security with the Windows Azure Service Bus to ensure that you can protect your endpoint in the cloud with a shared secret but also combine this with certificates so that you can identify the sender of the message.   Prerequisites As in the previous article before going into the walk through I want to explain a few assumptions about the scenario we are implementing but to keep the article shorter I am not going to walk through all of the steps in how to setup some of this. In the solution we have a simple console application which will represent the client application. There is also the services WCF application which contains the WCF service we will expose via the Windows Azure Service Bus. The WCF Service application in this example was hosted in IIS 7 on Windows 2008 R2 with AppFabric Server installed and configured to auto-start the WCF listening services. I am not going to go through significant detail around the IIS setup because it should not matter in relation to this article however if you want to understand more about how to configure WCF and IIS for such a scenario please refer to the following paper which goes into a lot of detail about how to configure this. The link is: http://tinyurl.com/8s5nwrz   Setting up the Certificates To keep the post and sample simple I am going to use the local computer store for all certificates but this bit is really just the same as setting up certificates for an example where you are using WCF without using Windows Azure Service Bus. In the sample I have included two batch files which you can use to create the sample certificates or remove them. Basically you will end up with: A certificate called PocServerCert in the personal store for the local computer which will be used by the WCF Service component A certificate called PocClientCert in the personal store for the local computer which will be used by the client application A root certificate in the Root store called PocRootCA with its associated revocation list which is the root from which the client and server certificates were created   For the sample Im just using development certificates like you would normally, and you can see exactly how these are configured and placed in the stores from the batch files in the solution using makecert and certmgr.   The Service Component To begin with let's look at the service component and how it can be configured to listen to the service bus using a shared secret but to also accept a username token from the client. In the sample the service component is called Acme.Azure.ServiceBus.Poc.Cert.Services. It has a single service which is the Visual Studio template for a WCF service when you add a new WCF Service Application so we have a service called Service1 with its Echo method. Nothing special so far!.... The next step is to look at the web.config file to see how we have configured the WCF service. In the services section of the WCF configuration you can see I have created my service and I have created a local endpoint which I simply used to do a little bit of diagnostics and to check it was working, but more importantly there is the Windows Azure endpoint which is using the ws2007HttpRelayBinding (note that this should also work just the same if your using netTcpRelayBinding). The key points to note on the above picture are the service behavior called MyServiceBehaviour and the service bus endpoints behavior called MyEndpointBehaviour. We will go into these in more detail later.   The Relay Binding The relay binding for the service has been configured to use the TransportWithMessageCredential security mode. This is the important bit where the transport security really relates to the interaction between the service and listening to the Azure Service Bus and the message credential is where we will use our certificate like we have specified in the message/clientCrentialType attribute. Note also that we have left the relayClientAuthenticationType set to RelayAccessToken. This means that authentication will be made against ACS for accessing the service bus and messages will not be accepted from any sender who has not been authenticated by ACS.   The Endpoint Behaviour In the below picture you can see the endpoint behavior which is configured to use the shared secret client credential for accessing the service bus and also for diagnostic purposes I have included the service registry element.     Hopefully if you are familiar with using Windows Azure Service Bus relay feature the above is very familiar to you and this is a very common setup for this section. There is nothing specific to the username token implementation here. The Service Behaviour Now we come to the bit with most of the certificate stuff in it. When you configure the service behavior I have included the serviceCredentials element and then setup to use the clientCertificate check and also specifying the serviceCertificate with information on how to find the servers certificate in the store.     I have also added a serviceAuthorization section where I will implement my own authorization component to perform additional security checks after the service has validated that the message was signed with a good certificate. I also have the same serviceSecurityAudit configuration to log access to my service. My Authorization Manager The below picture shows you implementation of my authorization manager. WCF will eventually hand off the message to my authorization component before it calls the service code. This is where I can perform some logic to check if the identity is allowed to access resources. In this case I am simple rejecting messages from anyone except the PocClientCertificate.     The Client Now let's take a look at the client side of this solution and how we can configure the client to authenticate against ACS but also send a certificate over to the service component so it can implement additional security checks on-premise. I have a console application and in the program class I want to use the proxy generated with Add Service Reference to send a message via the Azure Service Bus. You can see in my WCF client configuration below I have setup my details for the azure service bus url and am using the ws2007HttpRelayBinding.   Next is my configuration for the relay binding. You can see below I have configured security to use TransportWithMessageCredential so we will flow the token from a certificate with the message and also the RelayAccessToken relayClientAuthenticationType which means the component will validate against ACS before being allowed to access the relay endpoint to send a message.     After the binding we need to configure the endpoint behavior like in the below picture. This contains the normal transportClientEndpointBehaviour to setup the ACS shared secret configuration but we have also configured the clientCertificate to look for the PocClientCert.     Finally below we have the code of the client in the console application which will call the service bus. You can see that we have created our proxy and then made a normal call to a WCF in exactly the normal way but the configuration will jump in and ensure that a token is passed representing the client certificate.     Conclusion As you can see from the above walkthrough it is not too difficult to configure a service to use both a shared secret and certificate based token at the same time. This gives you the power and protection offered by the access control service in the cloud but also the ability to flow additional tokens to the on-premise component for additional security features to be implemented. Sample The sample used in this post is available at the following location: https://s3.amazonaws.com/CSCBlogSamples/Acme.Azure.ServiceBus.Poc.Cert.zip

  Read the article

• At times, you need to hire a professional.

  - by Phil Factor

  After months of increasingly demanding toil, the development team I belonged to was told that the project was to be canned and the whole team would be fired.  I’d been brought into the team as an expert in the data implications of a business re-engineering of a major financial institution. Nowadays, you’d call me a data architect, I suppose.  I’d spent a happy year being paid consultancy fees solving a succession of interesting problems until the point when the company lost is nerve, and closed the entire initiative. The IT industry was in one of its characteristic mood-swings downwards.  After the announcement, we met in the canteen. A few developers had scented the smell of death around the project already hand had been applying unsuccessfully for jobs. There was a sense of doom in the mass of dishevelled and bleary-eyed developers. After giving vent to anger and despair, talk turned to getting new employment. It was then that I perked up. I’m not an obvious choice to give advice on getting, or passing,  IT interviews. I reckon I’ve failed most of the job interviews I’ve ever attended. I once even failed an interview for a job I’d already been doing perfectly well for a year. The jobs I’ve got have mostly been from personal recommendation. Paradoxically though, from years as a manager trying to recruit good staff, I know a lot about what IT managers are looking for.  I gave an impassioned speech outlining the important factors in getting to an interview.  The most important thing, certainly in my time at work is the quality of the résumé or CV. I can’t even guess the huge number of CVs (résumés) I’ve read through, scanning for candidates worth interviewing.  Many IT Developers find it impossible to describe their  career succinctly on two sides of paper.  They leave chunks of their life out (were they in prison?), get immersed in detail, put in irrelevancies, describe what was going on at work rather than what they themselves did, exaggerate their importance, criticize their previous employers, aren’t  aware of the important aspects of a role to a potential employer, suffer from shyness and modesty,  and lack any sort of organized perspective of their work. There are many ways of failing to write a decent CV. Many developers suffer from the delusion that their worth can be recognized purely from the code that they write, and shy away from anything that seems like self-aggrandizement. No.  A resume must make a good impression, which means presenting the facts about yourself in a clear and positive way. You can’t do it yourself. Why not have your resume professionally written? A good professional CV Writer will know the qualities being looked for in a CV and interrogate you to winkle them out. Their job is to make order and sense out of a confused career, to summarize in one page a mass of detail that presents to any recruiter the information that’s wanted. To stand back and describe an accurate summary of your skills, and work-experiences dispassionately, without rancor, pity or modesty. You are no more capable of producing an objective documentation of your career than you are of taking your own appendix out.  My next recommendation was more controversial. This is to have a professional image overhaul, or makeover, followed by a professionally-taken photo portrait. I discovered this by accident. It is normal for IT professionals to face impossible deadlines and long working hours by looking more and more like something that had recently blocked a sink. Whilst working in IT, and in a state of personal dishevelment, I’d been offered the role in a high-powered amateur production of an old ex- Broadway show, purely for my singing voice. I was supposed to be the presentable star. When the production team saw me, the air was thick with tension and despair. I was dragged kicking and protesting through a succession of desperate grooming, scrubbing, dressing, dieting. I emerged feeling like “That jewelled mass of millinery, That oiled and curled Assyrian bull, Smelling of musk and of insolence.” (Tennyson Maud; A Monodrama (1855) Section v1 stanza 6) I was then photographed by a professional stage photographer.  When the photographs were delivered, I was amazed. It wasn’t me, but it looked somehow respectable, confident, trustworthy.   A while later, when the show had ended, I took the photos, and used them for work. They went with the CV to job applications. It did the trick better than I could ever imagine.  My views went down big with the developers. Old rivalries were put immediately to one side. We voted, with a show of hands, to devote our energies for the entire notice period to getting employable. We had a team sourcing the CV Writer,  a team organising the make-overs and photographer, and a third team arranging  mock interviews. A fourth team determined the best websites and agencies for recruitment, with the help of friends in the trade.  Because there were around thirty developers, we were in a good negotiating position.  Of the three CV Writers we found who lived locally, one proved exceptional. She was an ex-journalist with an eye to detail, and years of experience in manipulating language. We tried her skills out on a developer who seemed a hopeless case, and he was called to interview within a week.  I was surprised, too, how many companies were experts at image makeovers. Within the month, we all looked like those weird slick  people in the ‘Office-tagged’ stock photographs who stare keenly and interestedly at PowerPoint slides in sleek chromium-plated high-rise offices. The portraits we used still adorn the entries of many of my ex-colleagues in LinkedIn. After a months’ worth of mock interviews, and technical Q&A, our stutters, hesitations, evasions and periphrastic circumlocutions were all gone.  There is little more to relate. With the résumés or CVs, mugshots, and schooling in how to pass interviews, we’d all got new and better-paid jobs well  before our month’s notice was ended. Whilst normally, an IT team under the axe is a sad and depressed place to belong to, this wonderful group of people had proved the power of organized group action in turning the experience to advantage. It left us feeling slightly guilty that we were somehow cheating, but I guess we were merely leveling the playing-field.

  Read the article

• How to Plug a Small Hole in NetBeans JSF (Join Table) Code Generation

  - by MarkH

  I was asked recently to provide an assist with designing and building a small-but-vital application that had at its heart some basic CRUD (Create, Read, Update, & Delete) functionality, built upon an Oracle database, to be accessible from various locations. Working from the stated requirements, I fleshed out the basic application and database designs and, once validated, set out to complete the first iteration for review. Using SQL Developer, I created the requisite tables, indices, and sequences for our first run. One of the tables was a many-to-many join table with three fields: one a primary key for that table, the other two being primary keys for the other tables, represented as foreign keys in the join table. Here is a simplified example of the trio of tables: Once the database was in decent shape, I fired up NetBeans to let it have first shot at the code. NetBeans does a great job of generating a mountain of essential code, saving developers what must be millions of hours of effort each year by building a basic foundation with a few clicks and keystrokes. Lest you think it (or any tool) can do everything for you, however, occasionally something tosses a paper clip into the delicate machinery and makes you open things up to fix them. Join tables apparently qualify.  :-) In the case above, the entity class generated for the join table (New Entity Classes from Database) included an embedded object consisting solely of the two foreign key fields as attributes, in addition to an object referencing each one of the "component" tables. The Create page generated (New JSF Pages from Entity Classes) worked well to a point, but when trying to save, we were greeted with an error: Transaction aborted. Hmm. A quick debugger session later and I'd identified the issue: when trying to persist the new join-table object, the embedded "foreign-keys-only" object still had null values for its two (required value) attributes...even though the embedded table objects had populated key attributes. Here's the simple fix: In the join-table controller class, find the public String create() method. It will look something like this:     public String create() {        try {            getFacade().create(current);            JsfUtil.addSuccessMessage(ResourceBundle.getBundle("/Bundle").getString("JoinEntityCreated"));            return prepareCreate();        } catch (Exception e) {            JsfUtil.addErrorMessage(e, ResourceBundle.getBundle("/Bundle").getString("PersistenceErrorOccured"));            return null;        }    } To restore balance to the force, modify the create() method as follows (changes in red):     public String create() {         try {            // Add the next two lines to resolve:            current.getJoinEntityPK().setTbl1id(current.getTbl1().getId().toBigInteger());            current.getJoinEntityPK().setTbl2id(current.getTbl2().getId().toBigInteger());            getFacade().create(current);            JsfUtil.addSuccessMessage(ResourceBundle.getBundle("/Bundle").getString("JoinEntityCreated"));            return prepareCreate();        } catch (Exception e) {            JsfUtil.addErrorMessage(e, ResourceBundle.getBundle("/Bundle").getString("PersistenceErrorOccured"));            return null;        }    } I'll be refactoring this code shortly, but for now, it works. Iteration one is complete and being reviewed, and we've met the milestone. Here's to happy endings (and customers)! All the best,Mark

  Read the article

• CodePlex Daily Summary for Monday, November 11, 2013

  CodePlex Daily Summary for Monday, November 11, 2013Popular ReleasesULS Log Viewer Feature: ULS Log Viewer Feature: What's getting installed? - The solution include Custom Action (New action in Site Menu). Features: - Only Site Administrators can see Custom Action in site menu. - Multi-Language SUPPORT! (English, Hebrew). - Works against Secure Store Service to use administrator rights for getting access to ULS Logs Path on farm servers (Use the guide for creating new SSA). - Load only the last log file from ULS log path. - Gets automatically the ULS log path from Central Administration. - Choose from whi...Lib.Web.Mvc & Yet another developer blog: Lib.Web.Mvc 6.3.3: Lib.Web.Mvc is a library which contains some helper classes for ASP.NET MVC such as strongly typed jqGrid helper, XSL transformation HtmlHelper/ActionResult, FileResult with range request support, custom attributes and more. Release contains: Lib.Web.Mvc.dll with xml documentation file Standalone documentation in chm file and change log Library source code Sample application for strongly typed jqGrid helper is available here. Sample application for XSL transformation HtmlHelper/ActionRe...Magick.NET: Magick.NET 6.8.7.501: Magick.NET linked with ImageMagick 6.8.7.5. Breaking changes: - Refactored MagickImageStatistics to prepare for upcoming changes in ImageMagick 7. - Renamed MagickImage.SetOption to SetDefine.Media Companion: Media Companion MC3.587b: Fixed* TV - Locked shows display correctly after refresh * TV - missing episodes display in correct colour for missed or to be aired * TV - Rescrape of Multi-episodes working. * TV - Cache fix where was writing episodes multiple times * TV - Fixed Cache writing missing episodes when Display missing eps was disabled. Revision HistoryGenerate report of user mailbox size for Exchange 2010: Script Download: Script Download http://gallery.technet.microsoft.com/scriptcenter/Generate-report-of-user-e4e9afcaCheck SQL Server a specified database index fragmentation percentage (SQL): Script Download: Script Download http://gallery.technet.microsoft.com/scriptcenter/Check-SQL-Server-a-a5758043Save attachments from multiple selected items in Outlook (VBA): Script Download: Script Download: http://gallery.technet.microsoft.com/scriptcenter/Save-attachments-from-5b6bf54bRemove Windows Store apps in Windows 8: Script Download: Script Download http://gallery.technet.microsoft.com/scriptcenter/Remove-Windows-Store-Apps-a00ef4a4PCSX-Reloaded: 1.9.94: General changes:Support for compressed audio in cue files. ECM support. OS X changes:32-bit support has been dropped Partial French and Hungarian translationsDynamics AX 2012 R2 Kitting: AX 2012 R2 CU7 release of Kitting: Here is the AX 2012 R2 CU7 release of kitting. Released both as a XPO and a model.VidCoder: 1.5.12 Beta: Added an option to preserve Created and Last Modified times when converting files. In Options -> Advanced. Added an option to mark an automatically selected subtitle track as "Default". Updated HandBrake core to SVN 5878. Fixed auto passthrough not applying just after switching to it. Fixed bug where preset/profile/tune could disappear when reverting a preset.Toolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2013.9.25): XrmToolbox improvement Correct changing connection from the status dropdown Tools improvement Updated tool Audit Center (v1.2013.9.10) -> Publish entities Iconator (v1.2013.9.27) -> Optimized asynchronous loading of images and entities MetadataDocumentGenerator (v1.2013.11.6) -> Correct system entities reading with incorrect attribute type Script Manager (v1.2013.9.27) -> Retrieve only custom events SiteMapEditor (v1.2013.11.7) -> Reset of CRM 2013 SiteMap ViewLayoutReplicator (v1.201...Microsoft SQL Server Product Samples: Database: SQL Server 2014 CTP2 In-Memory OLTP Sample, based: This sample showcases the new In-Memory OLTP feature, which is part of SQL Server 2014 CTP2. It shows the new memory-optimized tables and natively-compiled stored procedures, and can be used to show the performance benefit of in-memory OLTP. Installation instructions for the sample are included in the file ‘awinmemsample.doc’, which is part of the download. You can ask a question about this sample at the SQL Server Samples Forum Composite C1 CMS - Open Source on .NET: Composite C1 4.1: Composite C1 4.1 (4.1.5058.34326) Write a review for this release - help us improve, recommend us. Getting started If you are new to Composite C1 and want to install it: http://docs.composite.net/Getting-started What's new in Composite C1 4.1 The following are highlights of major changes since Composite C1 4.0: General user features: Drag-and-drop images and files like PDF and Word directly from own your desktop and folders into page content Allow you to install Composite Form Builder ...CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.9.0: Implemented Recent Scripts list Added checking for plugin updates from AboutBox Multiple formatting improvements/fixes Implemented selection of the CLR version when preparing distribution package Added project panel button for showing plugin shortcuts list Added 'What's New?' panel Fixed auto-formatting scrolling artifact Implemented navigation to "logical" file (vs. auto-generated) file from output panel To avoid the DLLs getting locked by OS use MSI file for the installation.Resources Editor: Resources Editor: Stable releaseWPF Extended DataGrid: WPF Extended DataGrid 2.0.0.10 binaries: Now row summaries are updated whenever autofilter value sis modified.Social Network Importer for NodeXL: SocialNetImporter(v.1.9.1): This new version includes: - Include me option is back - Fixed the login bug reported latelyVeraCrypt: VeraCrypt version 1.0c: Changes between 1.0b and 1.0c (11 November 2013) : Set correctly the minimum required version in volumes header (this value must always follow the program version after any major changes). This also solves also the hidden volume issueCaptcha MVC: Captcha MVC 2.5: v 2.5: Added support for MVC 5. The DefaultCaptchaManager is no longer throws an error if the captcha values was entered incorrectly. Minor changes. v 2.4.1: Fixed issues with deleting incorrect values of the captcha token in the SessionStorageProvider. This could lead to a situation when the captcha was not working with the SessionStorageProvider. Minor changes. v 2.4: Changed the IIntelligencePolicy interface, added ICaptchaManager as parameter for all methods. Improved font size ...New ProjectsASP.NET Web API: ASP.NET Web API is a framework that makes it easy to build HTTP services that reach a broad range of clients, including browsers and mobile devices. ASP.NET WebDungeonPaper: DungeonPaper will be a platform for RPG players to utilize computers to replace traditional pen and paper in their campaigns.EMS: demoEvent Dispatcher: Event Dispatcher is a powershell module for centralized logging. Supports filtering events, and outputs to flat files or the Windows event log.Koopakiller.Numerics: A growing Math-Library for .NET, provided as a portable class library.NetroTrix: NetroTrix is a LAN Messenger Project.....Sharp Explorer: Sort of an alpha Play with C# to make a treeView Windows explorer. Currently multi-threaded dbl click to explore, r-click to preview some text files.TI Sensor Tag Library: A library to access the Texas Instruments Sensor Tag in Windows Store apps with Bluetooth GATT. Written in C#.ULS Log Viewer Feature: "ULS Log Viewer Feature" used by SharePoint Administrators, Developers and SharePoint Site Managers for get easily the real error behind the Correlation ID.Visual Studio Code Line Counter: VS Code Line Counter parses a Visual Studio solution file (.sln), reads each included project, and counts the number of lines in each included file.Vulcanus: TODOWax - The WiX Setup Project Editor: An interactive editor for WiX setup projects.

  Read the article

• Creating a GraphicsPath from a semi-transparent bitmap

  - by Moozhe

  I want to create a GraphicsPath and a list of Points to form the outline of the non-transparent area of a bitmap. If needed, I can guarantee that each image has only one solid collection of nontransparent pixels. So for example, I should be able to record the points either clockwise or counter-clockwise along the edge of the pixels and perform a full closed loop. The speed of this algorithm is not important. However, the efficiency of the resulting points is semi-important if I can skip some points to reduce in a smaller and less complex GraphicsPath. I will list my current code below which works perfectly with most images. However, some images which are more complex end up with paths which seem to connect in the wrong order. I think I know why this occurs, but I can't come up with a solution. public static Point[] GetOutlinePoints(Bitmap image) { List<Point> outlinePoints = new List<Point>(); BitmapData bitmapData = image.LockBits(new Rectangle(0, 0, image.Width, image.Height), ImageLockMode.ReadOnly, PixelFormat.Format32bppArgb); byte[] originalBytes = new byte[image.Width * image.Height * 4]; Marshal.Copy(bitmapData.Scan0, originalBytes, 0, originalBytes.Length); for (int x = 0; x < bitmapData.Width; x++) { for (int y = 0; y < bitmapData.Height; y++) { byte alpha = originalBytes[y * bitmapData.Stride + 4 * x + 3]; if (alpha != 0) { Point p = new Point(x, y); if (!ContainsPoint(outlinePoints, p)) outlinePoints.Add(p); break; } } } for (int y = 0; y < bitmapData.Height; y++) { for (int x = bitmapData.Width - 1; x >= 0; x--) { byte alpha = originalBytes[y * bitmapData.Stride + 4 * x + 3]; if (alpha != 0) { Point p = new Point(x, y); if (!ContainsPoint(outlinePoints, p)) outlinePoints.Add(p); break; } } } for (int x = bitmapData.Width - 1; x >= 0; x--) { for (int y = bitmapData.Height - 1; y >= 0; y--) { byte alpha = originalBytes[y * bitmapData.Stride + 4 * x + 3]; if (alpha != 0) { Point p = new Point(x, y); if (!ContainsPoint(outlinePoints, p)) outlinePoints.Add(p); break; } } } for (int y = bitmapData.Height - 1; y >= 0; y--) { for (int x = 0; x < bitmapData.Width; x++) { byte alpha = originalBytes[y * bitmapData.Stride + 4 * x + 3]; if (alpha != 0) { Point p = new Point(x, y); if (!ContainsPoint(outlinePoints, p)) outlinePoints.Add(p); break; } } } // Added to close the loop outlinePoints.Add(outlinePoints[0]); image.UnlockBits(bitmapData); return outlinePoints.ToArray(); } public static bool ContainsPoint(IEnumerable<Point> points, Point value) { foreach (Point p in points) { if (p == value) return true; } return false; } And when I turn the points into a path: GraphicsPath outlinePath = new GraphicsPath(); outlinePath.AddLines(_outlinePoints); Here's an example showing what I want. The red outline should be an array of points which can be made into a GraphicsPath in order to perform hit detection, draw an outline pen, and fill it with a brush.

  Read the article

• Drawing a TextBox in an extended Glass Frame w/o WPF

  - by Lazlo

  I am trying to draw a TextBox on the extended glass frame of my form. I won't describe this technique, it's well-known. Here's an example for those who haven't heard of it: http://www.danielmoth.com/Blog/Vista-Glass-In-C.aspx The thing is, it is complex to draw over this glass frame. Since black is considered to be the 0-alpha color, anything black disappears. There are apparently ways of countering this problem: drawing complex GDI+ shapes are not affected by this alpha-ness. For example, this code can be used to draw a Label on glass (note: GraphicsPath is used instead of DrawString in order to get around the horrible ClearType problem): public class GlassLabel : Control { public GlassLabel() { this.BackColor = Color.Black; } protected override void OnPaint(PaintEventArgs e) { GraphicsPath font = new GraphicsPath(); font.AddString( this.Text, this.Font.FontFamily, (int)this.Font.Style, this.Font.Size, Point.Empty, StringFormat.GenericDefault); e.Graphics.SmoothingMode = SmoothingMode.HighQuality; e.Graphics.FillPath(new SolidBrush(this.ForeColor), font); } } Similarly, such an approach can be used to create a container on the glass area. Note the use of the polygons instead of the rectangle - when using the rectangle, its black parts are considered as alpha. public class GlassPanel : Panel { public GlassPanel() { this.BackColor = Color.Black; } protected override void OnPaint(PaintEventArgs e) { Point[] area = new Point[] { new Point(0, 1), new Point(1, 0), new Point(this.Width - 2, 0), new Point(this.Width - 1, 1), new Point(this.Width -1, this.Height - 2), new Point(this.Width -2, this.Height-1), new Point(1, this.Height -1), new Point(0, this.Height - 2) }; Point[] inArea = new Point[] { new Point(1, 1), new Point(this.Width - 1, 1), new Point(this.Width - 1, this.Height - 1), new Point(this.Width - 1, this.Height - 1), new Point(1, this.Height - 1) }; e.Graphics.FillPolygon(new SolidBrush(Color.FromArgb(240, 240, 240)), inArea); e.Graphics.DrawPolygon(new Pen(Color.FromArgb(55, 0, 0, 0)), area); base.OnPaint(e); } } Now my problem is: How can I draw a TextBox? After lots of Googling, I came up with the following solutions: Subclassing the TextBox's OnPaint method. This is possible, although I could not get it to work properly. It should involve painting some magic things I don't know how to do yet. Making my own custom TextBox, perhaps on a TextBoxBase. If anyone has good, valid and working examples, and thinks this could be a good overall solution, please tell me. Using BufferedPaintSetAlpha. (http://msdn.microsoft.com/en-us/library/ms649805.aspx). The downsides of this method may be that the corners of the textbox might look odd, but I can live with that. If anyone knows how to implement that method properly from a Graphics object, please tell me. I personally don't, but this seems the best solution so far. To be honest, I found a great C++ article, but I am way too lazy to convert it. http://weblogs.asp.net/kennykerr/archive/2007/01/23/controls-and-the-desktop-window-manager.aspx Note: If I ever succeed with the BufferedPaint methods, I swear to s/o that I will make a simple DLL with all the common Windows Forms controls drawable on glass.

  Read the article

• Common Mercator Projection formulas for Google Maps not working correctly

  - by Tom Halladay

  I am building a Tile Overlay server for Google maps in C#, and have found a few different code examples for calculating Y from Latitude. After getting them to work in general, I started to notice certain cases where the overlays were not lining up properly. To test this, I made a test harness to compare Google Map's Mercator LatToY conversion against the formulas I found online. As you can see below, they do not match in certain cases. Case #1 Zoomed Out: The problem is most evident when zoomed out. Up close, the problem is barely visible. Case #2 Point Proximity to Top & Bottom of viewing bounds: The problem is worse in the middle of the viewing bounds, and gets better towards the edges. This behavior can negate the behavior of Case #1 The Test: I created a google maps page to display red lines using the Google Map API's built in Mercator conversion, and overlay this with an image using the reference code for doing Mercator conversion. These conversions are represented as black lines. Compare the difference. The Results: Check out the top-most and bottom-most lines: The problem gets visually larger but numerically smaller as you zoom in: And it all but disappears at closer zoom levels, regardless of screen orientation. The Code: Google Maps Client Side Code: var lat = 0; for (lat = -80; lat <= 80; lat += 5) { map.addOverlay(new GPolyline([new GLatLng(lat, -180), new GLatLng(lat, 0)], "#FF0033", 2)); map.addOverlay(new GPolyline([new GLatLng(lat, 0), new GLatLng(lat, 180)], "#FF0033", 2)); } Server Side Code: Tile Cutter : http://mapki.com/wiki/Tile_Cutter OpenStreetMap Wiki : http://wiki.openstreetmap.org/wiki/Mercator protected override void ImageOverlay_ComposeImage(ref Bitmap ZipCodeBitMap) { Graphics LinesGraphic = Graphics.FromImage(ZipCodeBitMap); Int32 MapWidth = Convert.ToInt32(Math.Pow(2, zoom) * 255); Point Offset = Cartographer.Mercator2.toZoomedPixelCoords(North, West, zoom); TrimPoint(ref Offset, MapWidth); for (Double lat = -80; lat <= 80; lat += 5) { Point StartPoint = Cartographer.Mercator2.toZoomedPixelCoords(lat, -179, zoom); Point EndPoint = Cartographer.Mercator2.toZoomedPixelCoords(lat, -1, zoom); TrimPoint(ref StartPoint, MapWidth); TrimPoint(ref EndPoint, MapWidth); StartPoint.X = StartPoint.X - Offset.X; EndPoint.X = EndPoint.X - Offset.X; StartPoint.Y = StartPoint.Y - Offset.Y; EndPoint.Y = EndPoint.Y - Offset.Y; LinesGraphic.DrawLine(new Pen(Color.Black, 2), StartPoint.X, StartPoint.Y, EndPoint.X, EndPoint.Y); LinesGraphic.DrawString( lat.ToString(), new Font("Verdana", 10), new SolidBrush(Color.Black), new Point( Convert.ToInt32((width / 3.0) * 2.0), StartPoint.Y)); } } protected void TrimPoint(ref Point point, Int32 MapWidth) { point.X = Math.Max(point.X, 0); point.X = Math.Min(point.X, MapWidth - 1); point.Y = Math.Max(point.Y, 0); point.Y = Math.Min(point.Y, MapWidth - 1); } So, Anyone ever experienced this? Dare I ask, resolved this? Or simply have a better C# implementation of Mercator Project coordinate conversion? Thanks!

  Read the article

• Can draw on only half of UIView

  - by ydlee777

  Hello. I am trying to draw grid on a UIView on a UIScrollView. The width of UIView is about 1000 pixels. However, I can draw lines only about first 340 pixels of the UIView. Can anyone help me on this? The drawGrid function is - (void)drawRect:(CGRect)rect { NSInteger width = 25 * 5 * 10; NSInteger height = (10 * 2 + 10) * 12; NSInteger i; //Get the CGContext from this view CGContextRef context = UIGraphicsGetCurrentContext(); // Draw rectangle with a blue stroke color and white fill color CGContextSetRGBStrokeColor(context, 0.0, 0.0, 1.0, 1.0); CGContextSetRGBFillColor(context, 0.0, 0.0, 1.0, 1.0); CGContextSetLineWidth(context, 2.0); CGContextAddRect(context, CGRectMake(0.0, 0.0, width, height)); CGContextFillPath(context); // Draw grid with red color CGContextSetStrokeColorWithColor(context, [UIColor redColor].CGColor); // Set the width of the pen mark CGContextSetLineWidth(context, 0.2); for (i = 0; i < height; i += 5) { if (i % 25 == 0) { CGContextSetLineWidth(context, 0.4); // Draw a line CGContextMoveToPoint(context, i, 0.0); CGContextAddLineToPoint(context, i, width); CGContextStrokePath(context); CGContextSetLineWidth(context, 0.2); } else { // Draw a line CGContextMoveToPoint(context, i, 0.0); CGContextAddLineToPoint(context, i, width); CGContextStrokePath(context); } } for (i = 0; i < width; i += 5) { if (i % 25 == 0) { CGContextSetLineWidth(context, 0.4); // Draw a line CGContextMoveToPoint(context, 0.0, i); CGContextAddLineToPoint(context, height, i); CGContextStrokePath(context); CGContextSetLineWidth(context, 0.2); } else { // Draw a line CGContextMoveToPoint(context, 0.0, i); CGContextAddLineToPoint(context, height, i); CGContextStrokePath(context); } } } I am also setting up the UIScrollView and UIView as follows: - (void)viewDidLoad { [super viewDidLoad]; CGRect frame = CGRectMake(0, 0, self.view.frame.size.width, self.view.frame.size.height); waveScrollView = [[WaveScrollView alloc] initWithFrame:frame]; CGRect waveframe = CGRectMake(0, 0, 25 * 5 * 10, (10 * 2 + 10) * 12); EKGWaveView *ekgWaveView = [[EKGWaveView alloc] initWithFrame:waveframe]; waveScrollView.contentSize = CGSizeMake(waveframe.size.width, waveframe.size.height); waveScrollView.maximumZoomScale = 4.0; waveScrollView.minimumZoomScale = 0.75; waveScrollView.clipsToBounds = YES; waveScrollView.aView = ekgWaveView; [waveScrollView addSubview:ekgWaveView]; waveScrollView.delegate = self; [self.view addSubview:waveScrollView]; } I appreciate any help. Thanks.

  Read the article

• The How-To Geek Holiday Gift Guide (Geeky Stuff We Like)

  - by The Geek

  Welcome to the very first How-To Geek Holiday Gift Guide, where we’ve put together a list of our absolute favorites to help you weed through all of the junk out there to pick the perfect gift for anybody. Though really, it’s just a list of the geeky stuff we want. We’ve got a whole range of items on the list, from cheaper gifts that most anybody can afford, to the really expensive stuff that we’re pretty sure nobody is giving us. Stocking Stuffers Here’s a couple of ideas for items that won’t break the bank. LED Keychain Micro-Light   Magcraft 1/8-Inch Rare Earth Cube Magnets Best little LED keychain light around. If they don’t need the penknife of the above item this is the perfect gift. I give them out by the handfuls and nobody ever says anything but good things about them. I’ve got ones that are years old and still running on the same battery.  Price: $8   Geeks cannot resist magnets. Jason bought this pack for his fridge because he was sick of big clunky magnets… these things are amazing. One tiny magnet, smaller than an Altoid mint, can practically hold a clipboard right to the fridge. Amazing. I spend more time playing with them on the counter than I do actually hanging stuff.  Price: $10 Lots of Geeky Mugs   Astronomy Powerful Green Laser Pointer There’s loads of fun, geeky mugs you can find on Amazon or anywhere else—and they are great choices for the geek who loves their coffee. You can get the Caffeine mug pictured here, or go with an Atari one, Canon Lens, or the Aperture mug based on Portal. Your choice. Price: $7   No, it’s not a light saber, but it’s nearly bright enough to be one—you can illuminate low flying clouds at night or just blind some aliens on your day off. All that for an extremely low price. Loads of fun. Price: $15       Geeky TV Shows and Books Sometimes you just want to relax and enjoy a some TV or a good book. Here’s a few choices. The IT Crowd Fourth Season   Doctor Who, Complete Fifth Series Ridiculous, funny show about nerds in the IT department, loved by almost all the geeks here at HTG. Justin even makes this required watching for new hires in his office so they’ll get his jokes. You can pre-order the fourth season, or pick up seasons one, two, or three for even cheaper. Price: $13   It doesn’t get any more nerdy than Eric’s pick, the fifth all-new series of Doctor Who, where the Daleks are hatching a new master plan from the heart of war-torn London. There’s also alien vampires, humanoid reptiles, and a lot more. Price: $52 Battlestar Galactica Complete Series   MAKE: Electronics: Learning Through Discovery Watch the epic fight to save the human race by finding the fabled planet Earth while being hunted by the robotic Cylons. You can grab the entire series on DVD or Blu-ray, or get the seasons individually. This isn’t your average sci-fi TV show. Price: $150 for Blu-ray.   Want to learn the fundamentals of electronics in a fun, hands-on way? The Make:Electronics book helps you build the circuits and learn how it all works—as if you had any more time between all that registry hacking and loading software on your new PC. Price: $21       Geeky Gadgets for the Gadget-Loving Geek Here’s a few of the items on our gadget list, though lets be honest: geeks are going to love almost any gadget, especially shiny new ones. Klipsch Image S4i Premium Noise-Isolating Headset with 3-Button Apple Control   GP2X Caanoo MAME/Console Emulator If you’re a real music geek looking for some serious quality in the headset for your iPhone or iPod, this is the pair that Alex recommends. They aren’t terribly cheap, but you can get the less expensive S3 earphones instead if you prefer. Price: $50-100   Eric says: “As an owner of an older version, I can say the GP2X is one of my favorite gadgets ever. Touted a “Retro Emulation Juggernaut,” GP2X runs Linux and may be the only open source software console available. Sounds too good to be true, but isn’t.” Price: $150 Roku XDS Streaming Player 1080p   Western Digital WD TV Live Plus HD Media Player If you do a lot of streaming over Netflix, Hulu Plus, Amazon’s Video on Demand, Pandora, and others, the Roku box is a great choice to get your content on your TV without paying a lot of money.  It’s also got Wireless-N built in, and it supports full 1080P HD. Price: $99   If you’ve got a home media collection sitting on a hard drive or a network server, the Western Digital box is probably the cheapest way to get that content on your TV, and it even supports Netflix streaming too. It’ll play loads of formats in full HD quality. Price: $99 Fujitsu ScanSnap S300 Color Mobile Scanner   Doxie, the amazing scanner for documents Trevor said: “This wonderful little scanner has become absolutely essential to me. My desk used to just be a gigantic pile of papers that I didn’t need at the moment, but couldn’t throw away ‘just in case.’ Now, every few weeks, I’ll run that paper pile through this and then happily shred the originals!” Price: $300   If you don’t scan quite as often and are looking for a budget scanner you can throw into your bag, or toss into a drawer in your desk, the Doxie scanner is a great alternative that I’ve been using for a while. It’s half the price, and while it’s not as full-featured as the Fujitsu, it might be a better choice for the very casual user. Price: $150       (Expensive) Gadgets Almost Anybody Will Love If you’re not sure that one of the more geeky presents is gonna work, here’s some gadgets that just about anybody is going to love, especially if they don’t have one already. Of course, some of these are a bit on the expensive side—but it’s a wish list, right? Amazon Kindle       The Kindle weighs less than a paperback book, the screen is amazing and easy on the eyes, and get ready for the kicker: the battery lasts at least a month. We aren’t kidding, either—it really lasts that long. If you don’t feel like spending money for books, you can use it to read PDFs, and if you want to get really geeky, you can hack it for custom screensavers. Price: $139 iPod Touch or iPad       You can’t go wrong with either of these presents—the iPod Touch can do almost everything the iPhone can do, including games, apps, and music, and it has the same Retina display as the iPhone, HD video recording, and a front-facing camera so you can use FaceTime. Price: $229+, depending on model. The iPad is a great tablet for playing games, browsing the web, or just using on your coffee table for guests. It’s well worth buying one—but if you’re buying for yourself, keep in mind that the iPad 2 is probably coming out in 3 months. Price: $500+ MacBook Air  The MacBook Air comes in 11” or 13” versions, and it’s an amazing little machine. It’s lightweight, the battery lasts nearly forever, and it resumes from sleep almost instantly. Since it uses an SSD drive instead of a hard drive, you’re barely going to notice any speed problems for general use. So if you’ve got a lot of money to blow, this is a killer gift. Price: $999 and up. Stuck with No Idea for a Present? Gift Cards! Yeah, you’re not going to win any “thoughtful present” awards with these, but you might just give somebody what they really want—the new Angry Birds HD for their iPad, Cut the Rope, or anything else they want. ITunes Gift Card   Amazon.com Gift Card Somebody in your circle getting a new iPod, iPhone, or iPad? You can get them an iTunes gift card, which they can use to buy music, games or apps. Yep, this way you can gift them a copy of Angry Birds if they don’t already have it. Or even Cut the Rope.   No clue what to get somebody on your list? Amazon gift cards let them buy pretty much anything they want, from organic weirdberries to big screen TVs. Yeah, it’s not as thoughtful as getting them a nice present, but look at the bright side: maybe they’ll get you an Amazon gift card and it’ll balance out. That’s the highlights from our lists—got anything else to add? Share your geeky gift ideas in the comments. Latest Features How-To Geek ETC The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Our Favorite Tech: What We’re Thankful For at How-To Geek The How-To Geek Guide to Learning Photoshop, Part 7: Design and Typography Happy Snow Bears Theme for Chrome and Iron [Holiday] Download Full Command and Conquer: Tiberian Sun Game for Free Scorched Cometary Planet Wallpaper Quick Fix: Add the RSS Button Back to the Firefox Awesome Bar Dropbox Desktop Client 1.0.0 RC for Windows, Linux, and Mac Released Hang in There Scrat! – Ice Age Wallpaper

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75  | Next Page >