Search Results

Search found 6100 results on 244 pages for 'power consumption'.

Page 72/244 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

  • "setpci: command not found" in CentOS

    - by spoon16
    I'm trying to configure my Mac Mini running CentOS 5.5 to start automatically when power is restored after a power loss. I understand the following command has to be executed: setpci -s 0:1f.0 0xa4.b=0 When I run that command on my machine though I get bash: setpci: command not found. Is there a package I need to install via yum or something? I'm not seeing a clear answer via Google and I looked at the man page for setpci and it doesn't mention anything. Also, does this command need to be run every time the machine starts or just once?

    Read the article

  • How can I troubleshoot a "Hardware Malfunction" blue screen?

    - by AaronSieb
    My computer has suddenly started crashing to a blue screen with the following text: hardware malfunction call your hardware vendor for support *the system has halted* The crash occurs randomly during normal use. I have thus far always been able to reproduce it by transferring the contents of a large folder... But I'm not sure if this is caused by the file transfer, or simply because the transfer takes long enough for something else to trigger it. A bit about my hardware I have an dual core Intel CPU, and Asus motherboard. Video card is by nVidia, and connects via PCIe. My hard drives are in pairs, and connect via SATA to a RAID controller on the motherboard. They are configured to use a RAID0 configuration. What I've tried so far There is nothing in the Windows Event Log. WhoCrashed was unable to find any crash records. ScanDisk runs to completion (it launches prior to Windows load) and reports no errors. MemTest reports no errors (to 200% coverage). System temperatures are in the range of 40 to 50 degrees Celsius, with video card temperatures in the range of 60 to eighty degrees Celsius. I have stripped the system down to a minimal configuration (hard drive, video card, one memory module, motherboard, CPU, power supply). The problem still occurrs. However, this has allowed me to rule out a few components: It is not the video card because the problem still occurred after replacing the video card another one I had on hand. It is not the hard drive or anything software related because the problem occurred after a fresh installation of Windows on a replacement hard drive. It is not the hard drive cables because I replaced those with new ones and still had the problem. It is not the power supply because the problem still occurred after replacing the power supply with another one I had on hand. It is probably not the memory because I've tried three different memory modules in three different memory slots and was still able to replicate the issue. Is there anything I can do to confirm what's causing the issue? At the moment it seems as though it must be either the motherboard or CPU, but those are both difficult components to replace... In addition, both components are relatively new (two to three years old). I will gladly edit in any additional information I can get my hands on, and/or focus the question as I can find more details...

    Read the article

  • How can I unfreeze an SSD connected to a remote server?

    - by chmac
    I don't have physical access to the machine, so I can't unplug the drive. # hdparm -I /dev/sda | grep frozen frozen The advice I've read elsewhere is to hotplug the drive, pull the power / sata cables while the machine is running. Those are not possible in this situation as I don't have physical access. I've tried power cycling the machine through the host's control panel a few times, but that hasn't worked. Is there any way I can unfreeze (unfrozen?) the drive without physical access?

    Read the article

  • The difference between desktop-series HDD drives and server-series

    - by FractalizeR
    Hello. What are the main differences between desktop-series hard disks and server-series? The obvious things I can see are: durability (server hardware mostly more qualitative and have more warranty) and power consumption (server hardware more focused on performance, than on power economy). Also server disks are usually a little faster, but it seems, that it is not always the case. May be there are some other reasons, that make you choose server-oriented series (Seagate ES drives, for example) over desktop-oriented ones (Seagate Barracuda series)? What are they?

    Read the article

  • Why my computer working without harddisc with livecd, but with hardisk not working - computer not response to any signals?

    - by Yosef
    Hi, History of problem: I formated computer (HP Pavalion Desktop). When I restart computer - computer come to first screen before boot and not response to any signals (f2, f10, ESC, etc..) I take out motherboad battery return after time back and power computer - result : as before I disconnect wires of hard-disk and insert livecd UBUNTU to cd and power coputer: result: works without hard-disk. What is the root of problem: hard-disk broken? hard-disk wires not working well? BIOS? other reason How can I fix the problem?(Buy new hard disk etc...) Thanks, Yosef

    Read the article

  • Fan twitches and LEDs blink when computer is plugged in

    - by Zifre
    I just finished assembling a desktop for the first time. The specs are: Gigabyte GA-H55M-S2H motherboard Core i3 530 CPU 4 GB DDR3 RAM 1 TB SATA hard drive 500 Watt PSU As soon as I plug in the computer, the "phase LED" starts blinking orange and the system fan LED blinks while the fan "twitches". This continues until about three seconds after I unplug the computer. This worries me a lot because I haven't even turned the computer on and it continues even after there is no power. I did make sure the PSU is on the proper power setting. What is causing this and how can I fix it? Is the motherboard dead?

    Read the article

  • Second Monitor Gets Bright, and then Blank.

    - by Jonathan Sampson
    I recently added a second LCD monitor to my home-computer. It was working fine for the first couple of days, but then it started having problems. Every 10-20 minutes it would get really bright, and then instantly go black. The power was still connected, so it wasn't turned off. If I turned the power off for a few minutes, I could turn it back on and get another 10-20 minutes of work done before it would happen again. What could cause this behavior?

    Read the article

  • Why Does Wireless Gear Degrade Over Time?

    - by bahamat
    I saw this originally posted on slashdot, but their comment format is not conducive to actually getting a correct answer. Having directly experienced this phenomenon myself, I'm now asking here where I think I can actually get an educated answer. Here's the original question verbatim: Lately I have replaced several home wireless routers because the signal strength has been found to be degraded. These devices, when new (2+ years ago) would cover an entire house. Over the years, the strength seems to decrease to a point where it might only cover one or two rooms. Of the three that I have replaced for friends, I have not found a common brand, age, etc. It just seems that after time, the signal strength decreases. I know that routers are cheap and easy to replace but I'm curious what actually causes this. I would have assumed that the components would either work or not work; we would either have a full signal or have no signal. I am not an electrical engineer and I can't find the answer online so I'm reaching out to you. Can someone explain how a transmitter can slowly go bad? Common (incorrect, but repeated) answers from slashdot include: Back then your neighbors didn't have wifi, now they do. They drowning you out. I don't think this is likely because replacing the access point with a new one and using the same frequencies solves the problem. Older devices had low transmit power. Crank that baby. As mentioned by a FreeBSD wireless developer this violates regulations and can physically damage the equipment. It was also mentioned that higher power in one direction is not necessarily reciprocated. This shows higher bars, but not necessarily a better connection. Manufacturers make cheap crap designed to wear out. This one actually may be legitimate although it is overly broad. What specifically causes damage over time? Heat? Excessive power? So can anyone provide an informed answer on this? Is there any way to fix these older access points?

    Read the article

  • How to know my wireless card has injection enabled?

    - by shrimpy
    I am playing around with aircrack. And was trying to see whether my wireless card on my laptop can pass the injection test And I end up seeing the following... does it mean my wireless card is not able to run aircrack? root@myubuntu:/home/myubuntu# iwconfig lo no wireless extensions. eth0 no wireless extensions. eth1 IEEE 802.11bg ESSID:"" Nickname:"" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=0 dBm Noise level=-57 dBm Rx invalid nwid:0 Rx invalid crypt:781 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 root@myubuntu:/home/myubuntu# aireplay-ng -9 eth1 ioctl(SIOCSIWMODE) failed: Invalid argument ARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211, ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead. Make sure RFMON is enabled: run 'airmon-ng start eth1 <#>' Sysfs injection support was not found either. root@myubuntu:/home/myubuntu#

    Read the article

  • How to increase hard drive transfer speed

    - by atif089
    This is my motherboard GA-M61PME-S2 (SATA upto 3.0 Gbps) and This is my Hard Disk Samsung hd502hi Capacity 500 GB Cache 16MB Disks / Heads 1 / 2 Interface SATA 3Gb/s Spindle Speed 5400 RPM Sustained Data Rate OD 100 MB/s Average Seek 8.9 ms Average Latency 5.56 ms Data Transfer Rate 300 MB/sec Weight 470 grams Power: Idle / Seek / R-W / Spin-up 3.9W / 4.8W / 5.1W / ~24W Acoustics (sound power) 2.2 / 2.7 Bel (idle / quiet seek / performance seek) When I copy things from one partition to another they transfer at a maximum of 30 MBps. However the drive supports upto 300 MBps right ? How do I increase the transfer speeds? P.S - Using Windows XP, All partitions are NTFS.

    Read the article

  • Can't start my Windows XP Virtual Machine: Insufficient Disk Space

    - by Rob
    Okay, I currently have a server with two virtual machines installed on it, a CentOS5.4 and a Windows XP. I was remote desktopping the Windows XP chatting on IRC, and all of a sudden I lost connection. I checked with my HyperVisor and tried to restart it, and it won't start at all. It's giving me this error: Message from server0297.serverpool.gnet.ba: Failed to extend swap file (fileHandle 16414) from 0 KB to 524288 KB: No space left on device. Could not power on VM : No space left on device. Failed to power on VM info 4/17/2010 9:49:20 PM root Basically I bought the set up from a host, he installed the HyperVisor and the VirtualMachines, and honestly I don't really know what I'm doing. I've looked at some of the settings, and I can't figure it out. If you need any additional information, I'll try to provide it. The CentOS5.4 is still starting and working flawlessly, if that's relevant.

    Read the article

  • Could we build a mega-processor out of superconductors?

    - by Carson Myers
    A superconductor, once cooled below a critical temperature, loses all of its electrical resistance and therefore becomes 100% efficient. This means that when a current flows through a superconductor, none of the energy is lost to heat or light. Theoretically, could we build a processor out of superconductive materials, that could effectively run at, oh I don't know, say, 300ghz? or 5,000ghz? Since a superconductive circuit is 100% efficient, this means that once supplied with electricity, the source of power could be completely removed from the circuit and the current would continue to flow forever. So if we made all the components inside a computer out of superconductive materials, could we get away with only supplying power to the peripherals and save a-whole-lot on energy, while dramatically increasing computing speed? Might this be one of the next big breakthroughs in computing? What do you think?

    Read the article

  • ClearOS - how to avoid getting stuck at a fsck message at boot?

    - by Scott Szretter
    I have had this happen a couple times - I have a ClearOS Enterprise 5.2 box, and due to a power outage or similar, it ends up showing an error at boot and saying that fsck needs to be run (I think it said with (or without?) the -a parameter). The problem is, I need this box to be headless, at a remote location (miles away)! SO, I need to come up with a solution on how to either have it automatically repair itself, without someone to be present with a monitor and keyboard. Another possibility is to simply avoid the issue all together - maybe there is something that can be changed so it's very unlikely to happen (I am unable to avoid the power outage of course - at least not practically). Finally, maybe it can be boot off a read only media (cd) or file system or similar? At least the base OS, so that it would always at least boot with enough configuration that might allow remote access, or basic connectivity?

    Read the article

  • external HDD with SATA & USB interface? [closed]

    - by GregH
    Anyone know of an external HDD that would have (in addition to USB) a SATA (eSATA) port/cable? i.e. Brand/Model Background - In one location I want to use it is I would like to increase the performance by cabling it directly to the PC SATA port, HOWEVER I don't want to have to open up the PC to do this each time. I was thinking of running a SATA cable out through the PC case so I just plug it directly into the external HDD in question. Perhaps it should be also externally powered too so I don't need to run a power cable out from the PC power supply.

    Read the article

  • how to i lock a Harddrive to a certain drive letter

    - by Memor-X
    i have an external hard drive that i have set to Drive F which on it contains some programs that i have shortcuts on the desktop how i have a second external hard drive which i store my music on which is auto assigned to Drive E, due to someone thinking that Australians love to have f** wings on power plugs for hard drives while power boards have each socket close together i can have both of these hard drives set at the same time my music hard drive i normally only plug up when i sync music to my ipod but on occasion when i unplug my music hard drive and plug my old one back in or at times when i turn on my computer with the music hard drive in, turn off my computer and turn it back on with my old hard drive it's drive letter gets switched to E i get annoyed having to always go into disk management and change the drive letter back to F when this happens so i am wondering if I can lock my hard drive to always be F, if anything else tries to be F it can fail for all i care If there is a batch file i can use that'll go though all the steps of Disk Management to change a drive's letter, that way i can set it up in the startup folder

    Read the article

  • Problems with chip fan and CPU fan

    - by JS Bangs
    I have a five-year-old ASUS motherboard that has been working fine for me for years, until I attempted to power it on yesterday and got a CPU fan speed and chip fan speed warning. Cracking open the case and powering the computer on, I can see the chip fan working, but it appears to be hitting something as it makes a very loud buzzing noise. The CPU fan, meanwhile, starts up when I power on, but slows down and stops after a few seconds! How can I address these problems? Is there any way to fix these sort of fan speed issues without just replacing the fan (which in the case of the chip fan, probably means replacing the whole motherboard)?

    Read the article

  • Powerbook G4 unresponsive on wake?

    - by David
    I have a Powerbook G4 17" and I recently updated to the Mac OS 10.5.8 and got a monitor. I put it to sleep by closing the lid and sometimes it resumes normally and sometimes it doesn't. It doesn't matter if it's on sleep for a day or 10 minutes, it just happens randomly. It wakes up, but the screen doesn't flash blue for a few seconds like it normally would, indicating that it found the second monitor. It just wakes up, and a picture appears on both screens and the mouse moves, but nothing responds. The only way I can make it work again is by holding down the power button until it shuts down and then turning it on again. this frustrating because then I have to reopen all my programs and Safari tabs. I tried resetting the PMU by unplugging everything and taking out the batter, then holding the power button for five seconds, but it has the same problem no matter what I do.

    Read the article

  • Windows 7 PC crashes after being locked a few minutes

    - by White Island
    I have a problem with an Optiplex 755 PC running (32-bit) Windows 7 Professional. I just installed the operating system last week, and ever since, it seems to crash when I lock the screen. It doesn't happen immediately; it's usually after I walk away, so a few minutes (but I'm not sure exactly how many). I have this non-specific error in the Event log. I've run a chkdsk, thinking it might be hard drive-related, but that didn't help. Any ideas on what to check and how are appreciated. :) Log Name: System Source: Microsoft-Windows-Kernel-Power Date: 11/17/2010 3:09:28 PM Event ID: 41 Task Category: (63) Level: Critical Keywords: (2) User: SYSTEM Computer: WORKSTATION.domain.local Description: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. Event Xml: 41 2 1 63 0 0x8000000000000002 6250 System WORKSTATION.domain.local 0 0x0 0x0 0x0 0x0 false 0

    Read the article

  • Disk boot failure, insert system disk and press Enter.

    - by torbengb
    Similar to this related question, I came home and found that my media center pc showed this message, Disk boot failure, insert system disk and press Enter Before I do anything with the (defective?) harddisk, what are the best first steps I can take to fix this with a minimum of damage? Normally the machine (Win Vista) is always on and never reboots by itself (Windows auto-updates are disabled too). Something must have caused it to reboot, though I'm sure we didn't have a power outage. The machine can't reboot on that disk, but it will boot on another disk I just plugged in for testing. I haven't changed anything, or even touched the machine, for several days, and it has been running fine until now. I did replace the power supply some weeks ago, because the old one suddenly stopped working. It has been working fine with the replacement PSU.

    Read the article

  • Windows 7 boot problem on a Lenovo Thinkpad Z61m 9450HAG

    - by Matt Taylor
    Hello, I recently did a full upgrade of windows 7 on my thinkpad, everything worked fine after up until the second reboot (the first reboot after some updates installed worked OK). At second reboot time the system would just black screen just before the Windows logo appears, disk/wireless/power/battery lights are all lit and the disk light is active (flickering). However, if I remove my battery and boot with just power it boots fine and quickly, and everything is OK. Any help on why this wont boot with battery plugged in is greatly appreciated - i need to take this battery out on the road/trains etc.... Cheers Matt

    Read the article

  • My server freezes within a few hours of logging out. Staying logged in keeps the server running

    - by HappyEngineer
    I have an Ubuntu Godaddy server I use to host mail and webapps. It started having problems a couple months ago. It would lock up and stop responding to anything. I couldn't ssh into it, so I'd have godaddy power cycle the server. I have never seen anything that looked suspicious in the var logs (although I'm no expert at reading them). An fsck turned up no problems. Godaddy replaced the ram, but found no hardware problems. I started logging the output from "top" to a log file and found that even that stops running when the server freezes. Now, here is the crazy part: It got so bad that it would actually go down every few hours, but then it stopped going down. I eventually realized I had left an ssh terminal logged into the machine running top. This seemed unlikely to be a reason, but after the server was up with no problems for a full week (remember, it had been going down after just a few hours), I disconnected from the ssh session. Lo and behold, within a few hours the server froze again! I had them power cycle again and then left another ssh session open with top. It has been going without problems for 8 days now. I told others about this and they hardly believe me. I simply can't imagine what is going on. I don't know what else to try other than to just get a new server and reinstall everything. Does anyone have any ideas about what I can look for to determine what the cause is? Is it possible there's some sort of exploit on the server which only runs if everyone is logged out of the system? EDIT: The power management gone haywire sounds plausible, so I've modified the /boot/grub/menu.lst to boot with acpi=off and apm=off. It appears to have prevented kacpid and kacpid_notify from being in the process list, so I assume I did that right. I've disconnected all my sessions from the server. I'll check later tonight to see if it's still up. If it goes down then I'll try the pinging process idea. EDIT: It went down again. It lasted about a day. I've had them reboot, so now I'll try running "nohup ping -i 5 google.com &" and then disconnect. If it goes down again I'll come back. Hopefully someone will have some more ideas.

    Read the article

  • New graphics card (GTX 760) slowing down entire PC

    - by Cayetano Gonçalves
    My new graphics card is making my PC totally unusable. It boots up really slowly, and when the windows screen comes on, the mouse lags really far behind. Nothing opens at a normal speed. However, when I put in my 5-year old graphics card, it all works fine. I'm currently using a Foxconn Renaissance LGA 1366 Intel X58 ATX Motherboard, Intel Motherboard Intel Core i7-950 Bloomfield 3.06GHz LGA 1366 130W Processor, and a EVGA SuperNOVA 850G2 80PLUS Gold Certified ATX12V/EPS12V 850W Power Supply . I know it can't be the power supply, because I just bought it today to try to fix the problem. I've also installed the newest version of BIOS available for my motherboard. I've also seen extreme variations in CPU while the new graphics card is in, and when the old graphics card is installed, it is much calmer. Any thoughts?

    Read the article

  • How to prevent hard drive from spinning down Windows 7?

    - by JL.
    I had a Western Digital External 1TB drive, which I was accessing via USB. I decided one day, that I would prefer to mount the HDD in my case, and access it via SATA interface. So I took it apart, and the actual mounting was a breeze. The only thing is, I think the device has some default power saving features, which means the device tends to stop spinning when idle for (x) amount of time. This creates delays when I am accessing the HDD. Is there anyway I can turn off these power saving features for this HDD?

    Read the article

  • RAID1 rebuild fails due to disk errors

    - by overlord_tm
    Quick info: Dell R410 with 2x500GB drives in RAID1 on H700 Adapter Recently one of drives in RAID1 array on server failed, lets call it Drive 0. RAID controller marked it as fault and put it offline. I replaced faulty disk with new one (same series and manufacturer, just bigger) and configured new disk as hot spare. Rebuild from Drive1 started immediately and after 1.5 hour I got message that Drive 1 failed. Server was unresponsive (kernel panic) and required reboot. Given that half hour before this error rebuild was at about 40%, I estimated that new drive is not in sync yet and tried to reboot just with Drive 1. RAID controller complained a bit about missing RAID arrays, but it found foreign RAID array on Drive 1 and I imported it. Server booted and it runs (from degraded RAID). Here is SMART data for disks. Drive 0 (the one that failed first) ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1 3 Spin_Up_Time POS--K 142 142 021 - 3866 4 Start_Stop_Count -O--CK 100 100 000 - 12 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 086 086 000 - 10432 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 11 192 Power-Off_Retract_Count -O--CK 200 200 000 - 10 193 Load_Cycle_Count -O--CK 200 200 000 - 1 194 Temperature_Celsius -O---K 112 106 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 198 000 - 3 And Drive 1 (the drive which was reported healthy from controller until rebuild was attempted) ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 35 3 Spin_Up_Time POS--K 143 143 021 - 3841 4 Start_Stop_Count -O--CK 100 100 000 - 12 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 086 086 000 - 10455 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 11 192 Power-Off_Retract_Count -O--CK 200 200 000 - 10 193 Load_Cycle_Count -O--CK 200 200 000 - 1 194 Temperature_Celsius -O---K 114 105 000 - 29 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 3 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 In extended error logs from SMART I found: Drive 0 has only one error Error 1 [0] occurred at disk power-on lifetime: 10282 hours (428 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 18 00 00 00 6a 24 20 40 00 Error: IDNF at LBA = 0x006a2420 = 6956064 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 60 00 f8 00 00 00 6a 24 20 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 18 00 60 00 00 00 6a 24 00 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 80 00 58 00 00 00 6a 23 80 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 68 00 50 00 00 00 6a 23 18 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 10 00 10 00 00 00 6a 23 00 40 00 17d+20:25:18.104 WRITE FPDMA QUEUED But Drive 1 has 883 errors. I see only few last ones and all errors I can see look like this: Error 883 [18] occurred at disk power-on lifetime: 10454 hours (435 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 51 00 80 00 00 39 97 19 c2 40 00 Error: AMNF at LBA = 0x399719c2 = 966203842 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 80 00 00 00 00 39 97 19 80 40 00 1d+00:25:57.802 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:25:57.779 READ LOG EXT 60 00 80 00 00 00 00 39 97 19 80 40 00 1d+00:25:55.704 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:25:55.681 READ LOG EXT 60 00 80 00 00 00 00 39 97 19 80 40 00 1d+00:25:53.606 READ FPDMA QUEUED Given those errors, is there any way I can rebuild RAID back, or should I make backup, shutdown server, replace disks with new ones and restore it? What about if I dd faulty disk to new one from linux running on USB/CD? Also, if anyone have more experiences, what could be causes for those errors? Crappy controller or disks? Disks are about 1 year old, but it is pretty unbelievable to me that both would die within so short timespan.

    Read the article

  • Is this a graphics card failure?

    - by Alexander Lozada
    I own an older 32-bit Dell XPS 410 that I intended to use for gaming. Currently, I have a ATI Radeon 4000 series card installed, along with a Core 2 Duo and Ubuntu 12.10. I'm fairly certain that my problem is a GPU failure - but before I spend money on a new one, I want to make sure other components aren't the problem/if it would be cheaper just to buy a new PC. Here are my symptoms: Computer power button remains orange (usually green when successfully started.) A fan gets increasingly faster until powered off. Monitor remains black when started, receiving no signal. When powered on, the computer will power itself off near instantly, and then turn on again. If startup is successful, sometimes the screen will become jittered and unusable unless restarted. Is this just a GPU failure, or something more extensive like the motherboard?

    Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >