Search Results

Search found 3325 results on 133 pages for 'route'.

Page 72/133 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• DNS servers via RA in IPv6

  - by glglgl

  Some time ago, RFC 6106 was created, which states how a router tells the clients about the DNS server to be used. It is a new standard, it has to be implemented, which needs time etc. I'm courious about the need for it: wouldn't have it been better to define a "globally valid" anycast address for DNS? Queries would be sent to this address and would be promoted along the default route until there is a host which claims to be responsible for it. In an enterprise network, that would be a central DNS server (or even more, on really big companies); in a SOHO network, it would either be the router or the DNS server of the ISP, in a root server hosting data center, it would be the DNS of the hoster, etc. What do I see wrong here? Do I have a wrong view of the anycast concept?

  Read the article

• Setting Up Multiple Domains (plus wildcard subdomains) to Point to the Same Site/VirtualHost

  - by Derek Reynolds

  I have my primary domain with wildcard subdomains setup already. username.maindomain.com and maindomain.com I want to provide my users with additional domains that they can select. additional1.com, additional2.com, additional3.com... These additional domains would also need to support wildcard subdomains (as the subdomains route to a username). Anyone know how to properly configure this in DNS and VirtualHost config? Currently I have the additional domains as A records pointing to the same IP as my main domain (with a wildcard subdomain A record for each as well). In my VirtualHost config I am placing the additional domain names in the ServerAlias directive. Let me know if any more detail is needed.

  Read the article

• Does anyone provide a Skype connection service?

  - by Runc

  Is there a way of offering Skype access to incoming calls while keeping all telephony traffic over our chosen business telephony provision? Is there a 3rd party who can route incoming Skype calls to our telephone system? The business has had requests from contacts wanting to call us via Skype, but we want to keep all telephony via our PBX and phone lines as our geographic location limits our available internet bandwidth. We also prevent installation of non-standard applications on desktops and do not want to add Skype to our build. I was wondering if there were any 3rd parties that provide a connection service that would allow our contacts to call via Skype and us receive the calls via our phone system.

  Read the article

• Bridge virtual machines out WLAN interface

  - by Thomas

  It seems that my wlan card (intel 5100 AGN) firmware doesn't allow "spoofing" MAC addresses. This has the side effect of destroying the capability to bridge out my virtual machines on that interface. Apparently this is a common thing on wlan cards. I can see the incoming traffic just fine in my virtual machines, but their DHCP queries don't get bridged out of the WLAN card. It works perfectly well when using the wired ethernet port. Is there a workaround for this? MAC-NAT or something? I don't want to route my virtual machines out to the Internet because I don't want my host OS to even have an IP address. I'm using Linux and KVM for virtualization.

  Read the article

• accessing a web server from the LAN and WAN

  - by jessh

  My router does not support loopback. In order to view a webpage on my server, I either have to type in the local ip (192.168.1.201), or be on another network. What are my options for making this easier? Here are some possible things: Route all web traffic through an external proxy (seems to be overkill) Run my own DNS server (where to start?!) Buy a new router that supports loopback. Surely there is another way that I can use my laptop on the LAN and the WAN by typing in my domain more easily than these solutions.

  Read the article

• Need help setting up mail DNS records

  - by Dave

  Hi, We are hosting our web site on host monster, but want our email to continue to be hosted at the old site. Our domain points to the hostmonster DNS servers, but I can't figure out the right configuration for the remote email servers. We have one MX entry, which is priority: 0 domain: ourdomain.com And then we have these DNS entries ... name: mail.ourdomain.com ttl: 14400 class: IN type: A record: old.host.ip.address name: mail1.ourdomain.com ttl: 14400 class: IN type: A record: old.host.secondip.address Can someone tell me what I need to add/edit to get mail to correctly route to our old host? Thanks, - Dave

  Read the article

• Add shared contacts to Outlook 2007 address book

  - by PHLiGHT

  Hello we just upgraded from exchange 2003 to 2010. 2010 seems to be pushing people to stop using public folders. Public folders had the nice feature that you could see the contacts of the public folder in your address book. I haven't found a way to add shared contacts to the Outlook address book. How do you do it? If I am unable to find the solution I will likely have to go through the hassle of migrating the public folders over. I was having a problem with that so I went the route of shared contacts.

  Read the article

• ssh all machines behind a router

  - by Luc

  Hello, I have several machines on my lan. One is used as a http proxy to target web sites located on the others (that's working fine now thanks to ServerFault). On my router, Port 22 is NATed to this proxy machine. I would like to be able to access the other machines, within internet, with something like: ssh user@first_machine.my_domain.tld ssh user@second_machine.my_domain.tld Could I use the proxy machine to 'filter' the incoming ssh request and to route them to the correct machine ? (in the same way it's possible to do so for web sites using a mix of mod_proxy and namevirtualhost in Apache) Thanks a lot, Luc

  Read the article

• How to contact an emergency service using only Internet?

  - by Vi.

  Suppose you are apart from the mobile or whatever phone (so can't call 112 or 911 or 999), but have have access to a computer with internet connection. How do you call/message an emergency service (of whatever country in hope they will route the request to the correct destination) using only Internet? Maybe there's some 911-like website or public SIP or whatever? Or better go to some chat/forum/StackExchange/whatever and ask somebody to make a call for you? (will users really believe?) /* 1. I'm not in any emergency, just curious. 2. I'm not sure on what SE site to ask this question. */

  Read the article

• [Apache] mod_rewrite www.site.com/dir/ --> www.site.com/dir/2009/

  - by Casey

  I'm having trouble with this rewrite. I've never really used mod_rewrite before and don't have much experience with regex. Any help is appreciated! <IfModule mod_rewrite.c> Options +FollowSymLinks RewriteEngine on #prevent nested looping RewriteCond %{ENV:REDIRECT_STATUS} ^$ #re-route incoming requests RewriteRule ^(.*)$ %{REQUEST_URI}2009/$1 [L,NE] </IfModule> This partially works, http://www.site.com/dir/ is routed to http://www.site.com/dir/2009/ but a request like http://www.site.com/dir/css/theme.css fails. I'm hoping to rewrite all requests to the parent directory into the 2009 subdirectory but I keep encountering infinite loops and server errors messages. I haven't found any useful examples out there. I figured this would be a common rewrite... Thanks in advance!

  Read the article

• Multiple IPs on Juniper SRX100 Untrust Port

  - by Will

  I am having trouble getting multiple IP addresses on the untrust port. I have tried a few different methods, but can't seem to get it to work. Does anyone have a good tutorial that is not easily found or if possible can type up the steps? I don't mind trying to do it through ssh, but would prefer web interface. Thank you ++++++++++++ Feb 1 fe-0/0/0 { unit 0 { family inet { dhcp { update-server; } } } } routing-options { static { route 0.0.0.0/0 next-hop 96.11.173.81; } } Right now it's setup to receive settings from 'cable modem' through dhcp, but I think it's only getting one IP.

  Read the article

• HOSTS File Edit in Windows 7 Not Effective - Pinging URL Still Shows Original IP Address

  - by Sootah

  I've edited my HOSTS file on my Windows 7 Ultimate PC to re-route a couple of URLs so that they point to 127.0.0.1, but after saving the file (and re-opening to verify the changes were written) and pinging them they still reply with the actual IP instead of being redirected to 127.0.0.1 as they should be. At least, that's how it worked in XP, Vista, etc. I even went so far as to restart my DNS service on the machine via services.msc; but no dice. So - I would imagine that Windows 7 keeps the HOSTS file there for legacy purposes and doesn't actually use it anymore. Is there a way to make W7 pay attention to the HOSTS file? In the event that you can't do that, where would I go to edit where these URLs point to? Thanks in advance! -Sootah

  Read the article

• Work firewall blocking Gmail IMAP port

  - by Sean

  My work has a very over protective firewall. We use Google Apps for our email and so can access the web interface just fine. I use my laptop at work however (MacBook connected via WiFi through my AirPort Express), and prefer to use Sparrow to check my email. The problem is that our firewall blocks whatever port Gmail's IMAP server uses. I'm trying to figure out the easiest way to work around this. I'm guessing I'll need to use an SSH tunnel or VPN, but I'm looking for specific instructions. I'd prefer to only route the IMAP stuff around the firewall as opposed to using a VPN full time. I have two computers at home (one PC, one Mac Mini) that are always on and could probably act as a server if needed.

  Read the article

• Map /dev/bus/usb node to /sys node on Linux

  - by Cody Brocious

  I'm using libusb to find and access a USB device, but once I get the information I need from there, I need to map it to a /sys node. This could be to the actual USB bus it's on, the /sys/bus/usb-serial node (which is where I'm going to get eventually), or effectively anywhere else since I can walk the tree from there. I can get to a /dev/bus/usb node easily enough, but I'm a bit lost from there. What would be the best route to perform this mapping? Alternatively, a way to get the /dev/ttyUSB device node for a /dev/bus/usb node would work as well, since it gets me the same result.

  Read the article

• Vmware sphere setting up external network

  - by Tom Beech

  I've just setup vmware vsphere 5 on a remote server (rented dedicated server). I've added my first VPS (centos 5.8) barebones. It's not finding any IP (internal or external) on boot. I've had an extra external IP assigned to my server that I wanted to use on the VPS. I tried editing the eth0 config and adding the IP in there and turning off the DHCP, but it can't find any IP or ping google or do any networking type things. How do I route the IP to my VPS so I can access it remotely?

  Read the article

• HowTo access Samba Share over VPN Tunnel?

  - by Jeff

  I don't know how to access a Samba share running on a Ubuntu 10.04 server through OpenVPN 2.1.0. I've installed & configured OpenVPN and everything works. The server end of the tunnel has the IP of 10.8.0.1. When I connect from XP (over our local network) I'm given the IP of 10.8.0.6. I can ping and trace route from both ends of the tunnel. Now, I'm lost...how to access the Samba share from XP and from OS X?

  Read the article

• Why Mac cannot connect to Iphone?

  - by martin08

  I couldn't always ssh to my iPhone from my Mac. They're both on the same wifi network but sometimes the connection is established, sometimes it failed. From my Mac: $ ssh [email protected] ssh: connect to host 192.168.0.102 port 22: Operation timed out $ ping 192.168.0.102 PING 192.168.0.102 (192.168.0.102): 56 data bytes ping: sendto: No route to host ping: sendto: Host is down ping: sendto: Host is down I enabled SSH on the phone and am sure it can load webpages. So what might be a reason why they cannot connect? Thanks

  Read the article

• Configure VPN to access remote LAN network on Windows7

  - by PiotrK

  Situation: I have two Windows7 machines (PC and laptop). I've set PC as VPN server and laptop as VPN client using default built-in W7 network tools. I've disabled use default gateway in remote network on client machine, so client don't try to route all communication through VPN. I've routed port 1723 (TCP/UDP) on NAT to my server and enabled IPSec/PPTP/L2TP passthrough I've put my laptop in indepedent network (basically I've connected it via 3G network), connected to VPN server and checked ipconfig /all I've get: IP Address: 192.168.1.101 Mask: 255.255.255.255 Gateway: (none) LAN mask in server LAN network is 255.255.255.0 - I am surely missing something obvious, but Google doesn't give me any good advices; How can I access local LAN network from remote VPN client? How can I access local shared documents?

  Read the article

• DNS error only in IE

  - by Le_Quack

  Our Intranet page has stopped working on some machines/some user accounts. The error I am getting points to a DNS issue but If I ping the site from the command line the it responds fine. The error I'm gettting on IE is Error: The web filter could not find the address for the requested site Why are you seeing this: The system is unable too determine the IP address of intranet.example.com I'm not quite sure why it mentions the web filter as there is a proxy exception for the intranet page and if I run a trace route it doesn't go via the web proxy (filtering system). Finally it isn't affecting everyone, just random users, also it doesn't affect the random users on all the client machines they use. I have one user where it happens on any client they log onto where most its just certian clients. It's even "fixed" itself for a few peoples. EDIT: hey Mikey thanks for the fast response. Proxies are correct and automatic configuration is off (both via GPO)

  Read the article

• How can I recreate root dnsNode objects and their RootDNSServers folder in AD after they are deleted?

  - by TonyD

  A few days ago I was trying to permanently remove root hints from my DNS server. After much ado, I decided to go a different route and am now trying to put everything back as it was. During the original process, I opened ADUC, clicked ViewAdvanced Features, and then browsed to System MicrosoftDNS and deleted the folder RootDNSServers. Now in ADUC, I cannot create a folder here to replace the one I deleted. I can run adsiedit and load DomainDNSZones for my domain. Under there, I see MicrosoftDNS, RootDNSServers, with all of the objects still inside of it. Is there a way for me to undo what I did? Can I recreate these objects in ADUC? Can I do something else to cause them to show back up there? Thanks!

  Read the article

• ECMP Load Balancing in JUNOS

  - by SpacemanSpiff

  I'm trying to figure out how to use ECMP load balancing in JUNOS. I know this isn't the best way to load balance, but its quick and dirty and gets done what I need to. In ScreenOS this was pretty easy. Device: SRX220 JunOS: 10.3R2.11 Here's what I've got so far: routing-options { static { route 0.0.0.0/0 { next-hop [ 1.1.1.1 1.1.1.2 ]; metric 10; } } maximum-paths 2; Will that do it? Tom

  Read the article

• Testing Tomcat with Virtual Hosts

  - by Marty Pitt

  I'm trying to test Tomcat virtual hosts on my dev machine (windows 7/Tomcat 6). I'd like to have requests for localhost, test1.localhost and test2.localhost all route through to the same tomcat instance. I've edited my hosts file to look as follows: 127.0.0.1 localhost ::1 localhost 127.0.0.1 test1.localhost 127.0.0.1 test2.localhost And added modified the Engine in server.xml as follows: <Engine defaultHost="localhost" name="Catalina"> <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase" /> <Host appBase="webapps" autoDeploy="true" name="localhost" unpackWARs="true" xmlNamespaceAware="false" xmlValidation="false"> <Alias>test1.localhost</Alias> <Alias>test2.localhost</Alias> </Host> </Engine> However, I'm getting a 404 when hitting test1.localhost:8080/myWebApp, although localhost:8080/myWebApp works fine. I can ping test1.localhost fine. What have I missed?

  Read the article

• IIS 7 Request routing

  - by Abraham Durairaj

  Not sure the title is right. I have my site configured in IIS7 and I have another partner site which runs on a different port eg. http:// localhost:1234 /mysite. Can I have my parent site to have a virtual site http:// localhost /mysite to route requests to the partner site http://localhost:1234 /mysite. I should not redirect but I should basically proxy the requests. Any help here is appreciable. Thanks in advance.

  Read the article

• Getting MSExchange transport Error on Server 2003 SP2

  - by Scott

  I am getting the following Error messages and do not know how to fix it. Event Type: Error Event Source: MSExchangeTransport Event Category: (8) Event ID: 3017 Date: 4/29/2010 Time: 1:21:12 PM User: N/A Computer: NETSRV Description: A non-delivery report with a status code of 5.3.5 was generated for recipient rfc822;[email protected] (Message-ID <19104335.51321272561635734.JavaMail.SYSTEM@PARROT). Causes: A looping condition was detected. (The server is configured to route mail back to itself). If you have multiple SMTP Virtual Servers configured on your Exchange server, make sure they are defined by a unique incoming port and that the outgoing SMTP port configuration is valid to avoid looping between local virtual servers. Thanks for any help you can provide.

  Read the article

• mod_jk fails to detect error state because JBoss gives 404, not 500

  - by Ilya Sher

  Configuration: Apache + mod_jk, several workers on other machines (load balancing). When JBoss fails to deploy an application for example because of failed connection to the database, requests to /myapp/somepage generate 404. How do I configure JBoss to return 500 for everything under /myapp when the application failed to deploy? Additional info: Since 404 is not an "error state" code, mod_jk does not mark the worker as failed and continues to route the traffic there. Since there might be valid requests to this application also generating 404, I can not configure mod_jk to treat 404 as an "error state"

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >