Search Results

Search found 6545 results on 262 pages for 'usb hub'.

Page 72/262 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Grub failure after cat removed USB drive

  - by user76270

  I had a perfectly working Ubuntu Server system with U12.4 and Server installed and was setting up the mail system. When I was absent from my computer room my cat (furry type) apparently got to play with a USB dongle on an extension cable and removed it. The system went berserk and now will not boot. I ran Ubuntu 12.4 on the install disk and the directory structure and every thing appears to still be on the drives. How do I recover the GRUB boot section without the system repartitioning everything and wiping everything else? Please I am a total newb when it comes to Linux errors and fixing them.

  Read the article

• How to Access Boot Options 12.04 Live USB

  - by Ryan Kampmeier

  I'm attempting to install 12.04 on my computer but booting from my USB drive results in a blank screen. This has happened since 10.04 and has always been fixed by putting nomodeset in the boot command, but now I can't access the boot options with F6 for some reason. How can I access the boot options? I booted into the live image on a different computer and it worked fine. I'm sure it's because of my Nvidia graphics. When I boot into the live image it shows a small gray box in the lower left corner of the screen and that's it. I can't edit the boot options or do anything else. Thanks in advance.

  Read the article

• Grub rescue after installing Ubuntu from USB

  - by Victor Suarez

  I have Windows 7 installed in my internal HDD and wanted to try out Ubuntu so I have an USB to put Ubuntu LiveUSB on and installed Ubuntu on a external HDD and everything worked out fine. Now the problem. If I remove the external HDD and try to boot Windows normally it shows the grub rescue screen. The only way to boot into Windows is by having the external HDD attached. Is there any way I can make it so I won't have to have the external HDD attached to be able to boot my Windows 7?

  Read the article

• Can I make a bootable USB flash drive for Mac from Windows

  - by Patrick

  Problem: MacBook hard drive crashed and is ruined. I need to work on a music assignment on a program only available for Mac OS X and Ubuntu, and will not be able to get a new hard drive for the Mac before the assignment is due. I only have non-administrator access to Windows XP and 7 computers. Can I make a USB drive with Ubuntu on it so I can use my MacBook with this? Can I create this from a Windows computer? Please give detailed steps, if possible, for I am a noob when it comes to computers, and especially Linux.

  Read the article

• Wifi USB interface being detected after some time

  - by Dani

  I've got a wifi interface connected by USB (its chipset is the zd1211b, which I think it works with the zyd driver). When I log into my ubuntu 12.04 it don't detect the inteface but after waiting an indeterminate amount of time (sometimes a few minutes, sometimes half an hour or more) it is detected and it works fine. It's just to weird and also very annoying because you don't know when are you going to be able to use the wireless connection. Any solution to this? Can I force somehow the SO to detect the interface?

  Read the article

• Ubuntu will not load up from my USB

  - by Ryan Mungwira

  I have a Sony Vaio Duo 13 and I am trying to get Ubuntu 13.10 to run on a partition on my Ultrabook but it will not load up from the USB drive. It goes to the black screen that asks if you just want to Try Ubuntu or if you want to Install it. I click just to try and it will not load. It acts like it is going to start up but then it just goes to a blank black screen and then I have to a hard restart. It does that when I click install as well. And I have tried disabling the Secure Install on my computer as well and nothing happens! What do I do?!?

  Read the article

• Gparted not working in live CD (usb)

  - by alex

  Using ubuntu 10.10 live usb. When atempting to open gparted (sudo gparted in a terminal), its window gets stuck a few seconds and disappears (i noticed that it closes when it's searching for /dev/sda/ partitions). After a while a window appears telling gparted closed unexpectedly and asking to restart it. Choosing this option won't do any effect. Typing sudo fdisk -l in a terminal does show a list of the drives and partitons correctly. Any ideas? Thanks.

  Read the article

• USB internet not accessible

  - by Eric

  I'm brand new to ubuntu and linux. We access internet from a usb stick issued by a local telephone company. When I plug the stick into the computer, I see the device listed under internet connections as a mobile broadband device but it is grayed out and inaccessible. I tried to create a new mobile broadband connection but my country (Gabon) is not listed and we have no payment plans per se (we pay from a pre-paid card system).. Any clues as to how I can get the system to recognize the internet connection? Thanks for any help...

  Read the article

• Languages and tools that are "portable" (work well from a USB storage drive) [closed]

  - by CodexArcanum

  I'm a huge fan of running programs from my portable hard drive: it means I always have my favorite tools no matter what computer I'm on. Sadly, development tools seem to be hard to get portable at times. I recently realized that the "portable" version of MinGW I was using off my USB drive was actually interfering with a locally installed version of MinGW, so sometimes even the tools you think are portable, aren't. So what are the best portable development tools that you've used? What runs well on a portable media, leaves the host machine clean, and generally makes moving around easier for you?

  Read the article

• Auto mount USB drive with permissions for all users

  - by oneaustin

  I have an Ubuntu 14.04 based Media Center and I store the media files on a USB HDD. I add files to drive directly on a Mac so I have it formatted as FAT32. The problem is that after reconnecting the drive to the Ubuntu, it mounts at /media/user/drivename and only the root user is allowed access. I need several applications to have full access to this drive. I can change file permissions in the terminal but it doesn't change because of the /media/user location. I am able to manually sudo mount /dev/sdc1 /media/drivename & sudo chmod 777 /media/drivename but the mount point changes each time. Is there a way to make this drive always mount where root and other applications have access?

  Read the article

• How to update the USB Ubuntu (ISO) with new software

  - by nakata

  I have Peppermint (based on Ubuntu) running of USB. Its bascially an ISO image that loads using Grub4Dos. Problem is that I each time I load Ubuntu - and want to use i.e. teamviewer or Firefox...I have to install it on the running live system. Since its running from a ISO image...a reboot means the software is gone. I can edit/open the ISO image using WinImage (on XP) - would you know how I can add extra software into this ISO image so next time Ubuntu loads...the new software is on there? Is there some special repositary director where I should copy the software files into and recreate the ISO image? The directory structure of this iso image is along the lines of: .disk [BOOT] Casper dists install isolinux pool preseed Appreciate your help with this. The software I am really interested in installing is the plugin for LogMeIn (for which I may need Firefox...thus I need Firefox installation) and Teamviewer. Thanks Nakata

  Read the article

• USB mouse freezes

  - by Zabba

  A simple Microsoft Optical mouse 1000 (USB) that runs perfectly on Windows, freezes up under Ubuntu 10.x and Fedora 1x after about 10 minutes of using the OS.Rebooting, the same problem comes up again in a few minutes. Interestingly, the problem does not occur when Ubuntu is installed in Oracle VirtualBox VM. Installing Ubuntu "as usual" (i.e. not in a VM), causes the problem to occur. Has any one here faced the same problem or have a solution for it? Maybe using a different mouse that is known to work with Ubuntu 10.x? If it helps my system is: Asus P5NSLI motherboard (nVidia nForce 570 chipset), 4 GB RAM Ubuntu 10.10 refers to "32 bit" version of Ubuntu It seems that Ubuntu has a lot of all types of freeze issues. Can someone recommend a version of Ubuntu that is fairly recent and stable ? I intend to use Ubuntu for Ruby on Rails development.

  Read the article

• Windows XP SP3 Keyboard stops working

  - by Kevin K

  Here's the strangest thing I have yet to see in 20+ yrs of computer repairs. My in-laws Windowsx XP SP3 has stopped recognizing keyboards. The keyboards work fine in the BIOS, during the boot select process to boot normally, etc. but once Windows comes up it will not recognize any USB keyboard. The USB mouse works fine, have tried different USB ports, different keyboards, etc. nothing works. I can log into the machine via VNC and use the remote keyboard just fine, but not connected locally. Tried a system restore, it says nothing changed. I am about to just re-install Windoze at this point, except I am afraid it will happen again. I have googled for this and it is not unheard of, but I have not found any solution other than nuking it. Anyone have any ideas? I have re-installed the USB drivers for the M/B. Gone into devices and deleted them for a re-install, etc. Keyboard works off a Linux live boot CD, and in the BIOS setup so it is not a hardware issue, and I have tried a few keyboards all of which I know are good and work fine on other systems.

  Read the article

• Windows XP SP3 Keyboard stops working

  - by Kevin K

  Here's the strangest thing I have yet to see in 20+ yrs of computer repairs. My in-laws Windowsx XP SP3 has stopped recognizing keyboards. The keyboards work fine in the BIOS, during the boot select process to boot normally, etc. but once Windows comes up it will not recognize any USB keyboard. The USB mouse works fine, have tried different USB ports, different keyboards, etc. nothing works. I can log into the machine via VNC and use the remote keyboard just fine, but not connected locally. Tried a system restore, it says nothing changed. I am about to just re-install Windows at this point, except I am afraid it will happen again. I have googled for this and it is not unheard of, but I have not found any solution other than nuking it. Anyone have any ideas? I have re-installed the USB drivers for the M/B. Gone into devices and deleted them for a re-install, etc. Keyboard works off a Linux live boot CD, and in the BIOS setup so it is not a hardware issue, and I have tried a few keyboards all of which I know are good and work fine on other systems.

  Read the article

• Bootable GRUB partition

  - by MA1

  I have a customized live fedora 12 USB which is working fine. What i want to do is to make a partition of my hard disk bootable so that my customized fedora can be run from hard disk. To accomplish this i did the following steps: Created a primary partition(/dev/sda2) and format it as ext3 and set it as active. Copy all the files in the live usb to /dev/sda2. Following are the live usb contents(all directories): a. boot b. EFI c. LiveOS d. syslinux Then i installed the GRUB in boot/grub Created the grub.conf in boot/grub Following are the contents of each directory in the USB: syslinux/ boot.cat isolinux.bin splash.jpg vesamenu.c32 initrd0.img ldlinux.sys syslinux.cfg vmlinuz0 LiveOS/ livecd-iso-to-disk osmin.img squashfs.img EFI/ boot/ boot.conf grub.conf boot.efi bootia32.conf bootia32.efi splash.jpg splash.xpm.gz vesamenu.c32 initrd0.img isolinux.bin isolinux.cfg vmlinuz0 boot/grub/ core GRUB files grub.conf olpc.fth Following are contents of grub.conf default=0 splashimage=/EFI/boot/splash.xpm.gz timeout 2 hiddenmenu title funLinux kernel /EFI/boot/vmlinuz0 root=live:LABEL=myFun rootfstype=auto ro liveimg quiet ssb.blacklist=1 selinux=0 vga=normal nomodeset rhgb initrd /EFI/boot/initrd0.img Now when i try to boot from the hard disk it shows the grub menu and fedora starting to load but during loading it said No root device found Boot has failed, sleeping forever So, where is the problem? what i am doing wrong?

  Read the article

• "Safely remove hardware"...doesn't.

  - by Kev

  I have an external USB harddisk that I have scripted to safely shut down after a backup, so the backup operator can unplug it, and knows not to if the lights are still on for some reason. It's always worked fine using the DevEject command-line utility. This week it failed for some reason: DevEject 1.0 2003 c't/Matthias Withopf Ejecting 'USB Mass Storage Device' [USB\VID_0411&PID_002A\00000704C8D2]...FAILED (23,5) Error ejecting device USB Mass Storage Device, vetoed (15,5)! Worse yet, using the SRH tray icon, I click Stop, click OK, it pauses about 5 seconds with OK and Cancel greyed out, closes the sub-window, and then the main window with the Stop button still shows the device, and Stop is still available. I can keep doing that and it never gets rid of the device. I can still access it in Explorer. LockHunter reports that nothing is locking the drive. I've made no changes to the backup configuration or anything to do with the drive this week. Why the sudden flake-out? Short of a restart, which I can't do today before the backup operator goes home, how do I fix it?

  Read the article

• Constant beeping

  - by Bogi Juul Peterson

  My computer has a problem with beeping. I'll first tell you how it started: One night I decided to watch a cartoon, and I took some water and food with me to eat while I watch. I fell asleep and when I woke up I had spilled water all over my keyboard. I didn't react quickly, because it went unnoticed for about 1 and a half hours. When I noticed, I quickly put my laptop on a radiator to try to dry it. When I turned the computer on there was a constant beeping sound. I didn't know what caused it, and I'm still not sure, but I think it has something to do with the USB hub. If I let the computer stand for some hours without any USB connections, it's fine, but when I put any kind of USB device in, it starts beeping. The laptop keyboard doesn't work so I have to have some kind of USB device connected to use the computer. The beeping is going on while I'm writing this and it makes my computer lag so much that it can make delays from the keyboard be from 1 second to 10 seconds. I need this computer because I don't have the money to buy a new one, and I have to use this computer for homework and games. The beeping is constant, with less than a second between beeps. If anyone has a solution, please help.

  Read the article

• RTL8192SU + RTL8191E Linux Issue Installing Driver

  - by s32ialx

  OK I've read tons of fourms of people getting the onboard RTL8191E working and the RTL8192SU working dif is U = USB they are both N and i have both Toshiba L500D-00T pre-installed Win Vistax64-HP and i have obtained the free Win7x64-HP upgrade the onboard wificard sucks and can't hold a stable connection for more then 20minutes in windows but the usb is amazing. Now problem is i tried both Ubuntu and Mandriva with no resolve the issue is the onboard drive detects and actually SHOWS that it's there but no wireless networks detect so it's saying no SSID's are broadcasting which i know is a lie since I'm running a 2wire bell dsl modem with built in wifi and a Linksys wrt54g w/ DD-WRT firmware and both are broadcasting fine. Why don't i use the USB? new in Mandriva Linux Control Center 2010.0 it shows up in Other/Unknown as RTL8191S WLAN Adapter and on the right pane this shows up Identification Vendor: ?Manufacturer Realtek Description: ?RTL8191S WLAN Adapter Media class: ? Connection Bus: ?USB Bus PCI #: ?1 PCI device #: ?5 Vendor ID: ?0x0bda Device ID: ?0x8172 Sub vendor ID: ?0x0000 Sub device ID: ?0x0000 Misc Module: ?rtl819xU In the hardware device manager in mandriva it shows up as unknown but shows that it's realtek and that it's a 8192 chipset. but no option to for a driver install and when i do a make in terminal i get this error and no clue what it means [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# make make: *** /lib/modules/2.6.31.12-desktop-3mnb/build: No such file or directory. Stop. make: *** [all] Error 2 [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# any help appreciated. and just encase I'm running currently Mandriva Spring 2010 Free

  Read the article

• How do I install Windows XP from an external hard drive?

  - by Plasmer

  I'm trying to install Windows XP Media Center edition by copying the install disc image to an external hard drive and making it bootable. Has anyone had success getting this to work on systems that can't boot from dvds/floppies? I'm basically working from this guide: http://www.dl4all.com/other/21495-install-windows-xp-from-usb.html Update - 2/15/10 I used WinToFlash on my laptop to format my usb hard drive from my install dvd (Windows XP Media Center Version 2005 with Update Rollup 2 from Dell) and selected "boot from usb device" at the boot selection menu and the windows installer started up. However, an error message came up saying that: "A problem has been detected and windows has been shut down to prevent damage to your computer." Originally on my desktop machine, I had 1 150Gb SATA drive, and 2 150 Gb SATA drives striped together using RAID. From the hard drive diagnostics, it appears the windows install on one of the RAIDed disks lost a block and this has been preventing me from booting up. I replaced the standalone drive with a new 1Tb SATA drive and disconnected the other hard drives. Could the message be indicating a virus is on the unformatted drive? or the usb hard drive? Update 2 - 2/15/10 The external hard drive didn't find any viruses when scanned. I tried installing Vista Home Premium 64bit SP1 using WinToFlash and that installed successfully onto the new 1Tb drive. WinToFlash was really easy to use and helped a lot, thanks!

  Read the article

• My Hard Drive isn't Working

  - by MeCB

  I never use Safely Remove Hardware with Windows XP. It has been working for me for years with my SD card, mouse, hard drive and memory stick. My hard drive has a USB cable and power cord so I can hook it up to any desktop hard drive. Now my hard drives don't like this and I did not know this till now. I am always careful and to wait till it is all finish accessing the USB before I unplug it. Now three of my hard drives can't be seen by Windows, though the others still work. when I hook it up to another computer it works fine. I use the same USB cable to hook up all of my hard drives one at a time. So my USB cable is good. I think that when I unplugged the hard drive this one time, it had a file it still wanted to see and now only this drive does not work only this computer. Then the same thing happens to my other two hard drive after I used it for a week with the same cables. How can I fix this?

  Read the article

• Cannot open /dev/rfcomm1 : Host is down

  - by srj0408

  I am working on raspberry PI and on Bluetooth. I am using old raspberry pi kernel as the new one has got some bugs that were not resolved with respect to the bluez daemon. At present my kernel version is 3.6.11. I am using a USB bluetooth dongle and my sole purpose is to auto connect the bluetooth dongle when ever it is in range. For that i think i have to run a script in the backend on RPI that will keep on checking the existence of usb bluetooth dongle. I started from the very scratch. I installed bluez daemon using apt-get install bluetooth bluez utils blueman and then i used hciconfig which gives me that my bluetooth usb dongle is working fine. But when i did hcitool scan , it give me no device in range even though my Serial bluetooth Device was on. I wasn't able to find any device in vicinity. Also when i unplugged and plug the USB dongle again, i was able to scan the serial device , but when i repeat the process, i find the earlier condition of not finding any deice. I had find another useful link, but that need address of the bluetooth device that need to be connected. I want to automate this using hcitool scan, storing the output to the a file and then comparing it with already paired devices and their name. For that i need to figure out why hcitool scan is sometime working and sometime not. ? Can some one help me in figuring out why this is happening. Is there any problem on hardware side i.e Bluetooth dongle is buggy or i had some problem in bluez utils. Edit 1: While as of now, hcitool scan is giving me my remote device address but still i am getting the same issue of HOUST IS DOWN, '/dev/rfcomm1'. I am really not getting any idea of what to be done.

  Read the article

• Install usblib package - Ubuntu

  - by Tom celic

  I need the package libusb for another package I am installing. I tried the following which seemed to install the package, sudo apt-get install libusb-dev but when I try to install the other package I get, configure: error: Package requirements (libusb-1.0 >= 0.9.1) were not met: No package 'libusb-1.0' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBUSB_CFLAGS and LIBUSB_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. When I run the command dpkg -L libusb-dev, I get: /. /usr /usr/bin /usr/bin/libusb-config /usr/include /usr/include/usb.h /usr/lib /usr/lib/libusb.a /usr/lib/libusb.la /usr/lib/pkgconfig /usr/lib/pkgconfig/libusb.pc /usr/share /usr/share/doc /usr/share/doc/libusb-dev /usr/share/doc/libusb-dev/html /usr/share/doc/libusb-dev/html/index.html /usr/share/doc/libusb-dev/html/preface.html /usr/share/doc/libusb-dev/html/intro.html /usr/share/doc/libusb-dev/html/intro-overview.html /usr/share/doc/libusb-dev/html/intro-support.html /usr/share/doc/libusb-dev/html/api.html /usr/share/doc/libusb-dev/html/api-device-interfaces.html /usr/share/doc/libusb-dev/html/api-timeouts.html /usr/share/doc/libusb-dev/html/api-types.html /usr/share/doc/libusb-dev/html/api-synchronous.html /usr/share/doc/libusb-dev/html/api-return-values.html /usr/share/doc/libusb-dev/html/functions.html /usr/share/doc/libusb-dev/html/ref.core.html /usr/share/doc/libusb-dev/html/function.usbinit.html /usr/share/doc/libusb-dev/html/function.usbfindbusses.html /usr/share/doc/libusb-dev/html/function.usbfinddevices.html /usr/share/doc/libusb-dev/html/function.usbgetbusses.html /usr/share/doc/libusb-dev/html/ref.deviceops.html /usr/share/doc/libusb-dev/html/function.usbopen.html /usr/share/doc/libusb-dev/html/function.usbclose.html /usr/share/doc/libusb-dev/html/function.usbsetconfiguration.html /usr/share/doc/libusb-dev/html/function.usbsetaltinterface.html /usr/share/doc/libusb-dev/html/function.usbresetep.html /usr/share/doc/libusb-dev/html/function.usbclearhalt.html /usr/share/doc/libusb-dev/html/function.usbreset.html /usr/share/doc/libusb-dev/html/function.usbclaiminterface.html /usr/share/doc/libusb-dev/html/function.usbreleaseinterface.html /usr/share/doc/libusb-dev/html/ref.control.html /usr/share/doc/libusb-dev/html/function.usbcontrolmsg.html /usr/share/doc/libusb-dev/html/function.usbgetstring.html /usr/share/doc/libusb-dev/html/function.usbgetstringsimple.html /usr/share/doc/libusb-dev/html/function.usbgetdescriptor.html /usr/share/doc/libusb-dev/html/function.usbgetdescriptorbyendpoint.html /usr/share/doc/libusb-dev/html/ref.bulk.html /usr/share/doc/libusb-dev/html/function.usbbulkwrite.html /usr/share/doc/libusb-dev/html/function.usbbulkread.html /usr/share/doc/libusb-dev/html/ref.interrupt.html /usr/share/doc/libusb-dev/html/function.usbinterruptwrite.html /usr/share/doc/libusb-dev/html/function.usbinterruptread.html /usr/share/doc/libusb-dev/html/ref.nonportable.html /usr/share/doc/libusb-dev/html/function.usbgetdrivernp.html /usr/share/doc/libusb-dev/html/function.usbdetachkerneldrivernp.html /usr/share/doc/libusb-dev/html/examples.html /usr/share/doc/libusb-dev/html/examples-code.html /usr/share/doc/libusb-dev/html/examples-tests.html /usr/share/doc/libusb-dev/html/examples-other.html /usr/share/doc/libusb-dev/copyright /usr/share/doc-base /usr/share/doc-base/libusb-dev /usr/share/man /usr/share/man/man1 /usr/share/man/man1/libusb-config.1.gz /usr/lib/libusb.so /usr/share/doc/libusb-dev/changelog.Debian.gz Any ideas??

  Read the article

• 'Unable to mount Filesystem' Error

  - by Charles

  Trying to extract data from a 'bricked' Western Digital MyBook Live 2tb drive. I came across a forum that advised to use Ubuntu (booted from a CD) on my Macbook. Managed to download and create a boot CD for Ubuntu (like this little operating system btw). Booted the machine with the CD and plugged the drive (which I had extracted from it's casing and placed into a external USB SATA case & plugged to the laptop). The drive is seen by Ubuntu but each time I click on the drive, it gives me the following error: Unable to mount 2.0 TB Filesystem Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdb4, missing codepage or helper program, or other error In some cases useful info is found in syslog -try dmesg | tail or so I am new to this and spent quite some time searching this site to see if I could find a solution to this problem without troubling anyone. I came up with a few that came close but some of the questioners mentioned that they had lost data...which scared me from going further. I need to basically extract 1 particular folder from the drive. If I can get to mount this volume 'sdb4', there is a folder called 'My_Work' which I need to back up. The rest I have/had a copy of. When I typed in dmesg | tail...I got several lines..but I think ones that are relevant are: [ 406.864677] EXT4-fs (sdb4): bad block size 65536 [ 429.098776] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only [ 439.786365] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only [ 445.982692] EXT4-fs (sdb4): bad block size 65536 [ 1565.841690] EXT4-fs (sdb4): bad block size 65536 I read somewhere to try/check 'sudo fdisk -l /dev/sdb4'. It gave me the following result: Disk /dev/sdb44: 1995.8 GB, 1995774623744 bytes 255 heads, 63 sectors/track, 242639 cylinders, total 3897997312 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sdb4 doesn't contain a valid partition table This is where I reached and got frustrated and decided to try & get help on this without digging myself deeper into a hole! I understand that the answer may already be out there. If so, could someone please point me in the right direction. And if not, could someone please resolve (if possible) my situation!

  Read the article

• Random process hangs after clean install

  - by Toshe

  After installing fresh Kubuntu 11.04 Natty on my desktop PC, I experienced some issues with application and process hangs. There is also a problem with my USB 3 hard disk. These sort of problems did not happen on Kubuntu 10.10 installed on the same PC (on separate partition). The hangs manifest themselves with kernel log messages like these: [ 960.480151] INFO: task amarok:2505 blocked for more than 120 seconds. [ 960.480153] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 960.480155] amarok D 0000000000000000 0 2505 1 0x00000000 [ 960.480158] ffff8800a556bb38 0000000000000086 ffff8800a556bfd8 ffff8800a556a000 [ 960.480162] 0000000000013d00 ffff8800cb7f3178 ffff8800a556bfd8 0000000000013d00 [ 960.480165] ffffffff81a0b020 ffff8800cb7f2dc0 ffffea000242ac58 ffff88012704c870 [ 960.480169] Call Trace: [ 960.480172] [<ffffffff815c19f7>] __mutex_lock_slowpath+0xf7/0x180 [ 960.480175] [<ffffffff815c144b>] mutex_lock+0x2b/0x50 [ 960.480180] [<ffffffffa0d0ad42>] video_open+0x102/0x400 [cx8800] [ 960.480183] [<ffffffff815c2cbe>] ? _raw_spin_lock+0xe/0x20 [ 960.480186] [<ffffffff8117c55d>] ? __d_lookup+0x10d/0x170 [ 960.480191] [<ffffffffa0ca0731>] v4l2_open+0x101/0x130 [videodev] [ 960.480194] [<ffffffff81168f4a>] chrdev_open+0xda/0x1f0 [ 960.480197] [<ffffffff81168e70>] ? chrdev_open+0x0/0x1f0 [ 960.480200] [<ffffffff81162cee>] __dentry_open+0xce/0x2f0 [ 960.480202] [<ffffffff8116ef33>] ? generic_permission+0x23/0xc0 [ 960.480205] [<ffffffff811641e1>] nameidata_to_filp+0x71/0x80 [ 960.480208] [<ffffffff811733c8>] finish_open+0xc8/0x1b0 [ 960.480210] [<ffffffff811725b7>] ? do_path_lookup+0x87/0x160 [ 960.480213] [<ffffffff81173b88>] do_filp_open+0x2c8/0x7c0 [ 960.480216] [<ffffffff81172902>] ? user_path_at+0x62/0xa0 [ 960.480219] [<ffffffff81131d4d>] ? handle_mm_fault+0x16d/0x250 [ 960.480222] [<ffffffff812e6c47>] ? __strncpy_from_user+0x27/0x60 [ 960.480225] [<ffffffff81180ea7>] ? alloc_fd+0xf7/0x150 [ 960.480228] [<ffffffff8116425a>] do_sys_open+0x6a/0x150 [ 960.480230] [<ffffffff81164360>] sys_open+0x20/0x30 [ 960.480233] [<ffffffff8100c002>] system_call_fastpath+0x16/0x1b [ 1080.480027] INFO: task knotify4:1663 blocked for more than 120 seconds. [ 1080.480030] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1080.480032] knotify4 D 0000000000000000 0 1663 1 0x00000000 [ 1080.480036] ffff880123a2bb28 0000000000000082 ffff880123a2bfd8 ffff880123a2a000 [ 1080.480040] 0000000000013d00 ffff880121003178 ffff880123a2bfd8 0000000000013d00 [ 1080.480044] ffff8800cb7e16e0 ffff880121002dc0 ffffffff81060a27 ffff88012704c870 [ 1080.480048] Call Trace: [ 1080.480054] [<ffffffff81060a27>] ? mutex_spin_on_owner+0x97/0xd0 [ 1080.480059] [<ffffffff815c19f7>] __mutex_lock_slowpath+0xf7/0x180 [ 1080.480069] [<ffffffff812e4f61>] ? vsnprintf+0x221/0x620 [ 1080.480072] [<ffffffff815c144b>] mutex_lock+0x2b/0x50 [ 1080.480076] [<ffffffffa0b2d10f>] cx8802_request_acquire+0x5f/0xf0 [cx8802] [ 1080.480081] [<ffffffffa0e87e08>] mpeg_open+0x78/0x270 [cx88_blackbird] [ 1080.480084] [<ffffffff8117c55d>] ? __d_lookup+0x10d/0x170 [ 1080.480092] [<ffffffffa0ca0731>] v4l2_open+0x101/0x130 [videodev] [ 1080.480096] [<ffffffff81168f4a>] chrdev_open+0xda/0x1f0 [ 1080.480099] [<ffffffff81168e70>] ? chrdev_open+0x0/0x1f0 [ 1080.480102] [<ffffffff81162cee>] __dentry_open+0xce/0x2f0 [ 1080.480105] [<ffffffff8116ef33>] ? generic_permission+0x23/0xc0 [ 1080.480108] [<ffffffff811641e1>] nameidata_to_filp+0x71/0x80 [ 1080.480111] [<ffffffff811733c8>] finish_open+0xc8/0x1b0 [ 1080.480113] [<ffffffff811725b7>] ? do_path_lookup+0x87/0x160 [ 1080.480116] [<ffffffff81173b88>] do_filp_open+0x2c8/0x7c0 [ 1080.480119] [<ffffffff81172902>] ? user_path_at+0x62/0xa0 [ 1080.480122] [<ffffffff811663f1>] ? get_empty_filp+0xa1/0x170 [ 1080.480125] [<ffffffff812e6c47>] ? __strncpy_from_user+0x27/0x60 [ 1080.480128] [<ffffffff81180ea7>] ? alloc_fd+0xf7/0x150 [ 1080.480131] [<ffffffff8116425a>] do_sys_open+0x6a/0x150 [ 1080.480134] [<ffffffff81164360>] sys_open+0x20/0x30 [ 1080.480137] [<ffffffff8100c002>] system_call_fastpath+0x16/0x1b [ 1080.480147] INFO: task dolphin:1842 blocked for more than 120 seconds. [ 1080.480148] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1080.480150] dolphin D 0000000000000000 0 1842 1 0x00000004 [ 1080.480154] ffff8800cb4f3b38 0000000000000082 ffff8800cb4f3fd8 ffff8800cb4f2000 [ 1080.480157] 0000000000013d00 ffff8800cb7f4858 ffff8800cb4f3fd8 0000000000013d00 [ 1080.480161] ffffffff81a0b020 ffff8800cb7f44a0 ffffea000267b0d0 ffff88012704c870 [ 1080.480164] Call Trace: [ 1080.480168] [<ffffffff815c19f7>] __mutex_lock_slowpath+0xf7/0x180 [ 1080.480171] [<ffffffff815c144b>] mutex_lock+0x2b/0x50 [ 1080.480176] [<ffffffffa0d0ad42>] video_open+0x102/0x400 [cx8800] [ 1080.480179] [<ffffffff815c2cbe>] ? _raw_spin_lock+0xe/0x20 [ 1080.480181] [<ffffffff8117c55d>] ? __d_lookup+0x10d/0x170 [ 1080.480186] [<ffffffffa0ca0731>] v4l2_open+0x101/0x130 [videodev] [ 1080.480190] [<ffffffff81168f4a>] chrdev_open+0xda/0x1f0 [ 1080.480192] [<ffffffff81168e70>] ? chrdev_open+0x0/0x1f0 [ 1080.480195] [<ffffffff81162cee>] __dentry_open+0xce/0x2f0 [ 1080.480198] [<ffffffff8116ef33>] ? generic_permission+0x23/0xc0 [ 1080.480200] [<ffffffff811641e1>] nameidata_to_filp+0x71/0x80 [ 1080.480203] [<ffffffff811733c8>] finish_open+0xc8/0x1b0 [ 1080.480206] [<ffffffff811725b7>] ? do_path_lookup+0x87/0x160 [ 1080.480208] [<ffffffff81173b88>] do_filp_open+0x2c8/0x7c0 [ 1080.480211] [<ffffffff81172902>] ? user_path_at+0x62/0xa0 [ 1080.480214] [<ffffffff81131d4d>] ? handle_mm_fault+0x16d/0x250 [ 1080.480217] [<ffffffff812e6c47>] ? __strncpy_from_user+0x27/0x60 [ 1080.480220] [<ffffffff81180ea7>] ? alloc_fd+0xf7/0x150 [ 1080.480223] [<ffffffff8116425a>] do_sys_open+0x6a/0x150 [ 1080.480225] [<ffffffff81164360>] sys_open+0x20/0x30 [ 1080.480228] [<ffffffff8100c002>] system_call_fastpath+0x16/0x1b Attempts to kill the hung process are unsuccessful: root@deskpc:~# ps -ef |grep amarok myuser 2505 1 0 10:47 ? 00:00:00 /usr/bin/amarok root 2747 2020 0 11:06 pts/3 00:00:00 grep --color=auto amarok root@deskpc:~# kill -9 2505 root@deskpc:~# ps -ef |grep amarok myuser 2505 1 0 10:47 ? 00:00:00 /usr/bin/amarok root 2749 2020 0 11:06 pts/3 00:00:00 grep --color=auto amarok root@deskpc:~# kill -9 2505 root@deskpc:~# ps -ef |grep amarok myuser 2505 1 0 10:47 ? 00:00:00 /usr/bin/amarok root 2751 2020 0 11:06 pts/3 00:00:00 grep --color=auto amarok root@deskpc:~# When trying to access my external USB3 disk, the following kernel message is observed: [ 2169.330012] xhci_hcd 0000:06:00.0: Timeout while waiting for a slot [ 2169.330018] hub 3-0:1.0: couldn't allocate port 1 usb_device I am not sure the two problems (application hangs and USB3 timeouts are related) but they do not happen under Kubuntu 10.10. Judging by the dmesg messages, it looks to me that this is a kernel (or potentially kernel driver) problem, but not sure how to debug it. Any ideas? I ran apport-bug, but it advised me to post a question here first. Shall I report the issue on the official K/Ubuntu bugzilla?

  Read the article

• How to detect webcam?

  - by Vishwas

  I installed Cheese but it is not yet possible for me to work with my webcam. After running lsusb I get this: Bus 007 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 005: ID 044e:3012 Alps Electric Co., Ltd Bus 003 Device 004: ID 044e:3013 Alps Electric Co., Ltd Bus 003 Device 003: ID 044e:3010 Alps Electric Co., Ltd Bluetooth Adapter Bus 003 Device 002: ID 044e:3011 Alps Electric Co., Ltd Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 05ca:1839 Ricoh Co., Ltd Visual Communication Camera VGP-VCC6 [R5U870] Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Tell me what should I do now?

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >