Search Results

Search found 23782 results on 952 pages for 'claims based authorizatio'.

Page 723/952 | < Previous Page | 719 720 721 722 723 724 725 726 727 728 729 730  | Next Page >

• USB keyboard stopped working in Ubuntu with error -71

  - by tapan

  I have a usb keyboard which was working perfectly till now (about a year since i have been regularly using ubuntu). It suddenly stopped working. It stopped working when I connected a USB HDD. Now the keyboard works randomly .. working for a while and then stops working for a longer time. Here is the dmesg output : [ 705.817076] usb 5-1: device not accepting address 8, error -71 [ 705.928032] usb 5-1: new low speed USB device using uhci_hcd and address 9 [ 706.336060] usb 5-1: device not accepting address 9, error -71 [ 706.448055] usb 5-1: new low speed USB device using uhci_hcd and address 10 [ 706.568044] usb 5-1: device descriptor read/64, error -71 [ 706.792049] usb 5-1: device descriptor read/64, error -71 [ 707.008060] usb 5-1: new low speed USB device using uhci_hcd and address 11 [ 707.128041] usb 5-1: device descriptor read/64, error -71 [ 707.352052] usb 5-1: device descriptor read/64, error -71 [ 707.456068] hub 5-0:1.0: unable to enumerate USB device on port 1 Based on the suggestions here i tried the following two things: echo -1 > /sys/module/usbcore/parameters/autosuspend echo Y > /sys/module/usbcore/parameters/old_scheme_first However, i am still facing the same problem. Can anyone help me out with this ? I'm using Ubuntu 10.04 Lucid Lynx.

  Read the article

• Variable directory names over SCP

  - by nedm

  We have a backup routine that previously ran from one disk to another on the same server, but have recently moved the source data to a remote server and are trying to replicate the job via scp. We need to run the script on the target server, and we've set up key-based scp (no username/password required) between the two servers. Using scp to copy specific files and directories works perfectly: scp -r -p -B [email protected]:/mnt/disk1/bsource/filename.txt /mnt/disk2/btarget/ However, our previous routine iterates through directories on the source disk to determine which files to copy, then runs them individually through gpg encryption. Is there any way to do this only by using scp? Again, this script needs to run from the target server, and the user the job runs under only has scp (no ssh) access to the target system. The old job would look something like this: #Change to source dir cd /mnt/disk1 #Create variable to store # directories named by date YYYYMMDD j="20000101/" #Iterate though directories in the current dir # to get the most recent folder name for i in $(ls -d */); do if [ "$j" \< "$i" ]; then j=${i%/*} fi done #Encrypt individual files from $j to target directory cd ./${j%%}/bsource/ for k in $(ls -p | grep -v /$); do sudo /usr/bin/gpg -e -r "Backup Key" --batch --no-tty -o "/mnt/disk2/btarget/$k.gpg" "$/mnt/disk1/$j/bsource/$k" done Can anyone suggest how to do this via scp from the target system? Thanks in advance.

  Read the article

• Google Chrome doesn't respond user actions correctly

  - by Carlos A. Junior

  Recently I've changed my OS to Ubuntu 12.04 (Cinnamon, 64 bits) from Mint 13 (KDE, 64 bits) and one same bug still appears on new installation. The Google Chrome it seems that don't refresh (repaint) page based on my interactions. Example: When i'm try comment an Youtube vídeo, when i click on textarea, o cursor don't appear inside of textarea, BUT, when/if i change to another tab and return the cursor appears...OK... If i start write some text...according i'm typing the chars don't appers...again if i change to another tab and return the typed text appears on textarea. Other cases that this bug appears: Modal boxes link...don't show the modal; Forms inside modal boxes don't show typed chars; The common Discus comment plugin don't work when focused; I don't have any idea of reason of this bug. (video driver, window manager, Chrome bug ?, i don't know) Any idea to solve this ? Additional informations: Google Chrome 22.0.1229.79 (Official Build 158531) OS Linux WebKit 537.4 (@129177) JavaScript V8 3.12.19.11 Flash 11.3.31.331 User Agent Mozilla/5.0 (X11; Linux i686) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.79 Safari/537.4 Command Line /opt/google/chrome/google-chrome --flag-switches-begin --flag-switches-end Executable Path /opt/google/chrome/google-chrome Profile Path /home/carlos/.config/google-chrome/Default Kernel version: 3.2.0-31-generic-pae Ubuntu 12.04 Best regards.

  Read the article

• SharePoint Records Center Submitted E-mail Records not picked up

  - by Kenneth Verburg

  We have set up a new SharePoint 2007 site with a Records Repository. We're using Exchange 2007 Managed Folders to route e-mails to this repository based on the 'label' attached to the e-mail as set in the Exchange 2007 journaling options. E-mails added to a Managed Folder get sent to SharePoint, they end up in the "Submitted E-mail Records" list of the Records Repository. That's according to plan, but the e-mails are not routed to the respective document library as defined by the label. Instead an error appears in the event viewer for every e-mail listed in the Submitted E-mail Records list, on every interval of the records repository schedule (set to every two minutes for testing purposes): Value cannot be null, parameter name: g. Sending a document from the SharePoint site iself to the Records Repository via the Send To... link works fine, but e-mails get stuck in the list... We have set Document Libraries in the Respository with and without content types (with matching names with the Label and the Record Routing rule set). Any ideas what could be wrong? This is in the event log: Every two minutes the following error appears in the Application Log: Source: Office SharePoint Server Category: Records Center Type: Error Event ID: 4975 User: N/A Computer: SPS2007 Description: Value cannot be null. Parameter name: g For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• Troubleshooting iptables and configuring it to drop the priority of long-term connections

  - by intuited

  I'm somewhat familiar with the general concepts of iptables, and would like to learn it in more detail. I'm hoping that my learning experience can also be useful. The situation: I'm running dd-wrt on my router. Despite its purported QoS skills, I'm still seeing connection latency shoot up hugely whenever there's an ongoing http connection, eg some large download. Under such conditions, it can take 10 seconds or more to load a basic webpage; sometimes the connections are dropped entirely. I've tried adjusting the parameters, dropping the allotted bandwidth for up and download to well under my limit, but nothing seems to work. dd-wrt is configured to use HTB as the QoS algorithm; HFSC, although presented as an option, seems to cause the router to crash, and is rumoured to not actually work on any linux system. I'd like to be able to troubleshoot this issue and hopefully improve the settings that dd-wrt is using, but I'm finding the learning curve a bit overwhelming. For starters I am not sure what HTB actually specifies: is this a set of iptables commands, or do some of those commands specify how HTB is to be used? I would like it to prioritize based on protocol the way that it already supposed to, and in addition I'd like to have it drop the priority of connections which have a high total byte count, say over 400KB. Also tips on utilities that can be run under dd-wrt to get more info on what's going on in there are appreciated. I've tried to get iftop to work but there were issues running curses. I'm leaning towards replacing dd-wrt with openwrt; comments on this strategy are also welcome. I suspect that I would be well advised to get a second router as a standin before trying that. It may be worth noting that my total bandwidth is pretty limited (256Kbit/s).

  Read the article

• Is 30 calls / second a lot for one IIS server?

  - by Lieven Cardoen

  We have a RIA application that 300 clients concurrently use in an intranet environment. Together they make 30 calls / second to IIS (asp.net) (actually it's 60 but calls are loadbalanced over two IIS servers). Half of the calls is getting an asset (Caching Profile is used so most of the time cache is hit), the other half is saving data to a sql server. Retrieving an asset is done with a aspx page. Saving the data happens via WebORB, asp.net and Sql Server. So some processing is needed by WebORB (amf decoding, GZIP, ...). We also use Spring.NET, and some of the container objects have a request scope (not a lot). IIS servers -- Virtual machines, 4 CPU, 2 gb RAM. They are based on Windows 2008 x64 SP2 Enterprise Edition. Sql Server 2008 is used. Apparently CPU of both IIS serers is constantly around 60-70%. Now, my question, is the load of 60-70% acceptable and how could we possible bring that down to less % (maybe using only one IIS server)? + Is 2 gb RAM enough? Assets can be up to 20mb, but on average, they are about 30kb. (the load of 60-70% is achieved with assets around 30kb). The data that gets saved with weborb is very small (2kb) and is just one object.

  Read the article

• Linux: Force fsck of a read-only mounted filesystem?

  - by Timothy Miller

  I'm developing for a headless embedded appliance, running CentOS 6.2. The user can connect a keyboard, but not a monitor, and a serial console would require opening the case, something we don't want the user to have to do. This all pretty much obviates the possibility of using a recovery USB drive to boot from, unless all it does is blindly reimage the harddrive. I would like to provide some recovery facilities, and I have written a tool that comes up on /dev/tty1 in place of getty to provide these functions. One such function is fsck. I have found out how to remount the root and other file systems read-only. Now that they are read-only, it should be safe to fsck them and then reboot. Unfortunately, fsck complains to me that the filesystems are mounted and refuses to do anything. How can I force fsck to run on a read-only mounted partition? Based on my research, this is going to have to be something obscure. "-f" just means to force repair of a clean (but unmounted) partition. I need to repair a clean or unclean mounted partition. From what I read, this is something "only experts" should do, but no one has bothered to explain how the experts do it. I'm hoping someone can reveal this to me. BTW, I've noticed that e2fsck 1.42.4 on Gentoo will let you fsck a mounted partition, even mounted read-write, but it seems only to do so if fsck is run from a terminal, so it can ask the user if they're sure they want to do something so dangerous. I'm not sure if the CentOS version does the same thing, but it appears that fsck CAN repair a mounted partition, but it flatly refuses to when not run from a terminal. One last-resort option is for me to compile my own hacked fsck. But I'm afraid I'll mess it up in some unexpected way. Thanks! Note: Originally posted here.

  Read the article

• Why is squid breaking kerberos/NTLM auth?

  - by DonEstefan

  I'm using squid 2.6.22 (Centos 5 Default) as a proxy. Squid seems to break the authentication process for web pages when they require NTLM or Kerberos Auth. I tested with sharepoint 2007 and tried all 3 authentication methods (NTLM, Kerberos, Basic). Accessing the site without squid works in all cases. When I access the same page with squid, then only basic-auth works. Using IE or Firefox desn't make any difference. Squid itself can be used by anybody (no auth_param configured). Its a bit tricky to find solutions online, since most of the topics whirl around auth_param for authenticating users to squid rather than authenticating users to a webpage behind squid. Could anyone help? Edit: Sorry, but my first test was totally screwed up. I tested against the wrong webservers (Memo to myself: always check assumptions before testing). Now I realized that the problem scenario is completely different. Kerberos work for IE Kerberos works for Firefox (after changing "network.negotiate-auth.trusted-uris" in about:config) NTLM works for IE NTLM does NOT work in Firefox (even after changing "network.automatic-ntlm-auth.trusted-uris" in about:config) By the way: The feature that provides NTLM-passthrough in squid is called "connection pinning" and the HTTP header "Proxy-support: Session-based-authentication""

  Read the article

• haproxy: Is there a way to group acls for greater efficiency?

  - by user41356

  I have some logic in a frontend that routes to different backends based on both the host and the url. Logically it looks like this: if hdr(host) ends with 'a.domain.com': if url starts with '/dir1/': use backend domain.com/dir1/ elif url starts with '/dir2/': use backend domain.com/dir2/ # ... else if ladder repeats on different dirs elif hdr(host) ends with 'b.domain.com': # another else if ladder exactly the same as above # ... # ... else if ladder repeats like this on different domains Is there a way to group acls to avoid having to repeatedly check the domain acl? Obviously there needs to be a use backend statement for each possibility, but I don't want to have to check the domain over and over because it's very inefficient. In other words, I want to avoid this: use backend domain.com/url1/ if acl-domain.com and acl-url1 use backend domain.com/url2/ if acl-domain.com and acl-url2 use backend domain.com/url3/ if acl-domain.com and acl-url3 # tons more possibilities below because it has to keep checking acl-domain.com. This is particularly an issue because I have specific rules for subdomains such as a.domain.com and b.domain.com, but I want to fall back on the most common case of *.domain.com. That means every single rule that uses a specific subdomain must be checked prior to *.domain.com which makes it even more inefficient for the common case.

  Read the article

• The physical working paradigm of a signal passing on wire.

  - by smwikipedia

  Hi, This may be more a question of physics, so pardon me if there's any inconvenience. When I study computer networks, I often read something like this in order to represent a signal, we place some voltage on one end of the wire and the other end will detect the voltage and thus the signal. So I am wondering how a signal exactly passes through wire? Here's my current understanding based on my formal knowledge about electronics: First we need a close circuit to constrain/hold the electronic field. When we place a voltage at somewhere A of the circuit, electronic field will start to build up within the circuit medium, this process should be as fast as light speed. And as the electronic field is being built up, the electrons within the circuit medium are moved, and thus electronic current occurs, and once the electronic current is strong enough to be detected at somewhere else B on the complete circuit, then B knows about what has happend at A and thus communication between A and B is achieved. The above is only talking about the process of sending a single voltage through wire. If there's a bitstream and we need to send a series of voltages, I am not sure which of the following is true: The 2nd voltage should only be sent from A after the 1st voltage has been detected at B, the time interval is time needed to stimulate the electronic field in the medium and form a detectable electronic current at B. Several different voltages could be sent on wire one by one, different electronic current values will exists along the wire simutaneously and arrive at B successively. I hope I made myself clear and someone else has ever pondered this question. (I tag this question with network cause I don't know if there's a better option.) Thanks, Sam

  Read the article

• TeamCity sends inadequate responses after Selenium tests

  - by Dmitriy Sukharev

  I have a TeamCity 7.0.2 at CentOS 6.2 server without X Server. I've installed x11-fonts*, xvfb, firefox, xauth, extracted env. variable DISPLAY=localhost:1, and started xvfb. After that I could start Selenium tests using maven. Tests are executed, but there's an issue with TeamCity. Usually TeamCity starts hehaves absolutely inadequate (it confuses images at the page, sends xml or strange text ampersants and numbers in responses and is a bit slower), also tests are executed 4 times slower (1h 15m) at server than at tester Windows 7-based machine (25m). It worth to notice that tests launch two Jetty servers for tested application (one for REST-services application and another for client). In TeamCity I set JVM command line parameters: -Xms256m -Xmx1224m -XX:MaxPermSize=320m, and Additional Maven command line parameters ends with "-DMAVEN_OPTS=-Xmx1024m" (without quotes). Also both web-services and TeamCity uses the same Oracle server (but different Oracle users). Finally TeamCity and its build agent is at the same server. Server has only 4GB of RAM, but during testing there're 400MB of RAM and 1.2GB of swap. TeamCity and Firefox uses about 65% of CPU during testing. There's no firefox process after end of testing. My knowledge about Selenium is weak. I only know that we use 2.20.0 version of selenium-java maven dependency. Please help me to determine why TeamCity sends wrong responces after Selenium tests. I've tried to give you all information I have, but feel free to ask me for more information.

  Read the article

• Excel data into PowerPoint slides

  - by nqw1

  I have already found some helpful sites but I'm still unable to do what I want. My Excel file contains few columns and multiple rows. All the data from one row would be in one slide but data from different cells in that one row should go to a specific elements in PP slide. At first, is it possible to export data from an Excel cell into a specific text box in PP? For example, I would like to have all data from the first column of each row go to a Text box 1. Let's say I have 100 rows so I would have 100 slides and each slide would have Text bow 1 with correct data. Text box of slide 66 would have data from the first column of row 66. Then all data from the second column of each row would go to a text bow 2 and so on. I tried to do some macros with bad success. I also tried to use Word outlines and export them into PP (New slide - Slides from Outline) but there seems to be a bug since I got 250 pages of gibberish. I had only two paragraphs and both had one word. First paragraph used Heading 1 style and second paragraph used Normal style. Sites what I have found, use VB and/or some other programming language to create slides from Excel sheets. I have tried to add those VB codes into my macros but none of them hasn't worked so far. Probably I just don't know how to use them correctly :) Here's some helpful sites: VBA: Create PowerPoint Slide for Each Row in Excel Workbook Creating a Presentation Report Based on Data Question in Stackoverflow I use Office 2011 on Mac. Any help would be appreciated!

  Read the article

• Change the default route without affecting existing TCP connections

  - by Patrick Horn

  Let's say I have two public network addresses on my server: one NAT through an ISP (192.168.99.0/24), and a VPN through a different ISP (192.168.1.0/24), already configured with a per-host route to the VPN server through my ISP. Here is my initial routing table. I am currently routing through my ISP on subnet 192.168.99.0/24. $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.99.1 0.0.0.0 UG 0 0 0 eth1 55.66.77.88 192.168.99.1 255.255.255.255 UGH 0 0 0 eth1 192.168.99.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 Now, I want new TCP connections to switch to my 192.168.1.0/24 so I type the following: $ route add -net 0.0.0.0 gw 192.168.1.1 dev tap0 When I do this, it causes some long-standing TCP connections to hang. Is there a way to I safely change the default interface for new connections, while allowing existing TCP connections to use the old route (i.e. do I need enable some sort of stateful routing table)? I am okay with a solution that only works with established TCP connections, and I don't care how hacky it is. For example, if there is a way to add temporary iptables rules for existing connections to force them over the old route. But there has to be some way to do this. EDIT: Just a note about a simple "route add -host ... " for existing connections: this solution would work if I am fine with leaving a subset of IPs on the old interface. However, in my application, this actually doesn't solve my problem because I want to allow new connections to come on the new interface even if they have the same source IP. I'm now looking at using the "ip route" command to set source-based routing rules.

  Read the article

• How do you install .net4 on a Server 2008 r2 machine through psremoting in powershell?

  - by Jake

  I need to write a script that installs .net 4 remotely using powershell to a group of Server 2008 R2 machines. I based my script off of http://social.technet.microsoft.com/Forums/en-US/winserverpowershell/thread/3045eb24-7739-4695-ae94-5aa7052119fd/. enter-pssession -computername localhost $arglist = "/q /norestart /log C:\Users\tempuser\Desktop\dotnetfx4" $filepath = "C:\Users\tempuser\Desktop\dotNetFx40_Full_setup.exe" Start-Process -FilePath $filepath -ArgumentList $arglist -Wait -PassThru After running the command I would get the following log errors (running the same lines locally would install .net without error): Action: Downloading Item Failed to CreateJob : hr= 0x80200014 Action: Performing actions on all Items Action: Performing Action on Exe at C:\Users\tempuser\Desktop\dotnetfx4\SetupUtility.exe Exe (C:\Users\tempuser\Desktop\dotnetfx4\SetupUtility.exe) succeeded. Exe Log File: dd_SetupUtility.txt Action complete Action: ServiceControl - Stop clr_optimization_v2.0.50727_32 ServiceControl operation succeeded! Action complete Action: ServiceControl - Stop clr_optimization_v2.0.50727_64 ServiceControl operation succeeded! Action complete Action: Performing Action on Exe at C:\Users\tempuser\AppData\Local\Temp\Microsoft .NET Framework 4 Setup_4.0.30319\Windows6.1-KB958488-v6001-x64.msu Exe (C:\Users\tempuser\AppData\Local\Temp\Microsoft .NET Framework 4 Setup_4.0.30319\Windows6.1-KB958488-v6001-x64.msu) failed with 0x5 - Access is denied. . PerformOperation on exe returned exit code 5 (translates to HRESULT = 0x5) Action complete OnFailureBehavior for this item is to Rollback. Action: Performing actions on all Items Action complete Action complete Action: Downloading http://go.microsoft.com/fwlink/?LinkId=164184&clcid=0x409 using WinHttp WinHttpDetectAutoProxyConfigUrl failed with error: 12180 Unable to retrieve Proxy information although WinHttpGetIEProxyConfigForCurrentUser called succeeded Action complete C:\Users\tempuser\AppData\Local\Temp\Microsoft .NET Framework 4 Setup_4.0.30319\TMPF279.tmp.exe: Verifying signature for netfx_Core.mzz C:\Users\tempuser\AppData\Local\Temp\Microsoft .NET Framework 4 Setup_4.0.30319\TMPF279.tmp.exe Signature verified successfully for netfx_Core.mzz Action complete Decompression completed with code: 16389 Decompression of payload failed: C:\Users\tempuser\AppData\Local\Temp\Microsoft .NET Framework 4 Setup_4.0.30319\netfx_Core.mzz Action complete Final Result: Installation failed with error code: (0x80074005) (Elapsed time: 0 00:00:28). Is there some security setting or perhaps something else I've missed?

  Read the article

• PostgreSQL lots of large Arrays and Writes

  - by strife911

  Hi, I am running a python program that spawns 8 threads and as each thread launch its own postmaster process via psycopg2. This is to maximize the use of my CPU-cores (8). Each thread call a series of SQL Functions. Most of these functions go through many thousands of rows each associated to a large FLOAT8[] Array (250-300) values by using unnest() and multiplying each FLOAT8 by an another FLOAT8 associated to each row. This Array approach minimized the size of the Indexes and the Tables. The Function ends with an Insert into another Table of a row of the same form (pk INT4, array FLOAT8[]). Some SQL Functions called by python will Update a row of these kind of Tables (with large Arrays). Now I currently have configured PostgreSQL to use most of the memory for cache (effective_cache_size of 57 GB I think) and only a small amount of it for shared memory (1GB I think). First, I was wondering what the difference between Cache and Shared memory was in regards to PostgreSQL (and my application). What I have noticed is that only about 20-40% of my total CPU processing power is used during the most Read intensive parts of the application (Select unnest(array) etc). So secondly, I was wondering what I could do to improve this so that 100% of the CPU is used. Based on my observations, it does not seem to have anything to do with python or its GIL. Thanks

  Read the article

• Squid Authentication & streaming

  - by Steve Butler

  I've got squid setup using Kerberos authentication. I'm also using squidguard as an URL redirector to block out the usual nastiness of the web. There are some sites though that we allow certain users to, and others not. This all works well, assuming I'm not using any streaming. From what i can determine from the squid logs and the wireshark traces I've done, when the initial request to stream is sent, everything is good, the authenticated username is sent with the request to squidguard. The problem is that on subsequent traffic the username is not sent to squidguard, causing it to be blocked based on default policy. I've tried using the squid built-in allow/deny stuff, but its relatively clunky, and so far squidguard has been pretty easy and fast. Here comes the question(s): How do i get Squid to pass username on all requests? (something tells me this isn't the best way) How do i get squidguard to see traffic is authenticated to a specific user even when a username isn't passed? Is there any other way of accomplishing this? A few details that may be of importance: I'm using a list of users stored in a text file for squidguard to compare against. I'm using full kerberos auth with Squid. CentOS 6.0 Squid 3.1.4 Squidguard 1.3

  Read the article

• Parental Controls in Ubuntu - per user

  - by Hamish Downer

  I would like to set up parental controls on Ubuntu for a friend of mine. I want it so that the child user has the controls set, but the parent user is not restricted. To be clear, they are sharing one computer, so a router based solution won't help. And I would like a set of step by step instructions to do this. Just one way of doing it. I'm an experienced Ubuntu user, happy at the command line. I've spent quite some time googling for this along the way. I hope that the GChildCare project will eventually make this easy, but it is not ready yet. In the meantime, the WebContentControl GUI provides a way of managing parental controls, but apply them to every user on the computer (easy WebContentContol install instructions and detailed instructions, discussion and related links on ubuntuforums). The ubuntuforums post has a FAQ that states that user-specific configuration is not possible with WebContentControl, and then provides 3 links he used to help him do it. But they are far from step by step instructions. There is this thread which is notes along the way and linking to this article about squid and dansguardian. And then to these two dansguardian articles which are somewhat in depth ... So does anyone know of an existing guide to how to set up parental controls on ubuntu with some users not affected? If no one has come up with an answer after a little bit, I'll set up a community wiki answer so we can come up with a guide.

  Read the article

• When to use Truecrypt, and when not to?

  - by tm77

  I have about 30 (this number will most likely grow over the next few years to 50 or more) unencrypted laptops that I have been tasked to encrypt (entire drive). These machines will be used off site regularly by my users. These machines are running Windows 7 and XP (about 50/50), but more Windows 7 every month. I have experience with Truecrypt, and have had no issues. It appears to be THE solution for a free solution. My concern with Truecrypt is that my users will have 2 passswords needed to login to their machines. Also, I need to choose to either have 1 password for my organization, or carefully document each machine's password (management nightmare). In my mind, choosing between a managed and a free encryption solution is primarily based on the NUMBER of machines that will be encrypted and supported. Two questions: From a management standpoint, what is the tipping point of users where a managed solution would pay for itself over Truecrypt? What are some good third party solutions? (I will consider Bitlocker, but the price to upgrade Windows 7 licenses is a turn-off) I would love to hear from some admins with experience in supporting encrypted machines in a corporate environment. Many thanks in advance!

  Read the article

• How small (spec wise) can a virtual machine be and still boot up and run some sort of OS?

  - by IllvilJa

  One of the advantages with virtual machines is that you can be very flexible with their sizes. If the host system permits it, you can have a very large virtual machine with a lot of virtual RAM and disk. Also, you can decide to go the other way around, to give the virtual machine a very modest amount of RAM and disk and then choose and configure the OS appropriately. The question is, how small virtual machines have people managed to setup (and get to both boot up and to run)? Virtual machines doing something usuful is preferable, even if I know "useful" in this context is awfully subjective, but laboratory-cases with a configuration stripped beyond common sense could be intresting as well, just to see what people manage to boot and run. Quite open ended question and quite academic, but think of it: an extremely small VM (which still does something useful) takes very little memory and disk and can be quite quickly saved to and restored from disk. If it's also gentle on CPU resources, one might consider having a huge number of such VMs up and running on a host. (Imagine a VM running just an old Commodore 64 or Commodore Amiga in it. Ok, way wrong CPU architecture for modern Virtualization software running on a x86-based PC but still an interesting thought. You could have quite a few such small VMs running on a modern PC.)

  Read the article

• GlusterFS on VMWare ESXi 5

  - by Dharmavir

  I want to build network file system on top of my VMWare ESXi based virtual nodes which are running Ubuntu 12.04 LTS. I am evalaluating options and found that GlusterFS (http://www.gluster.org/) can turn out to be a good choice. Purpose: I have about 2 dozen VM nodes with different configurations, on 2 physical nodes which has following configuration: 16 core Intel Xeon 1 TB 48 GB RAM Now as I said earlier each Physical server has about 1TB hdd and I can increase if I want additional so for now I have 2TB disk space available, these space is distributed in VM nodes I have created on which about 2 dozen VM nodes live. Now some of them being application server and mgmt server, they have plenty of free disk space which I want to utilize for some heavy storage which I can not design if I do that individually on single VM node. This way if my storage is distributed between dozens of VM nodes and about 2 or more physical nodes I have some sort of backup as well. I do not mind if data gets stored redundently but per my knowledge it might hapeen that individual VM nodes will not be able to store all of the data because complete data size for example if we take 100GB will exceed VM disk size of 70GB and then VM will also have system and program files on it. I need some suggestion that will GlusterFS be the solution for which I am looking forward to or I should go with something like hadoop? I am not too sure. But yes, I would like to utilize my free space on each VM node and while doing that if I get store data redundently I am okay because it will give me data security.

  Read the article

• Linux Mint reset display resolution from console

  - by wullxz

  I have a Linux Mint 13 Xfce in a VMware Workstation 8 VM and set the resolution from 800x600 to 1280x768 and now I get permanently logged out when I try to login. I knew how to get back to my old resolution back in the xorg.conf days but Linux Mint now uses xrandr which won't display any displays when running # xrandr because X is not running (of course not - I can't login over GUI). I know that there are configuration files in /etc/X11/Xsession.d/ because I configured a debian based thinclient's resolution in a file called /etc/X11/Xsession.d/91configure_display but that file doesn't exist in my Linux Mint VM. So, how do I reset my X screen resolution from console? Edit: I forgot to tell you that I can't change resolution in console: # xrandr -s 800x600 Can't open display This message appears every time I use xrandr or xrandr -s *resolution* Update: I tried what bWowk suggested: # export DISPLAY=:0.0 # xrandr -s 800x600 No protocol specified No protocol specified Can't open display :0.0 So, that doesn't work either. Isn't there a configuration file that is executed every time X starts? X is running btw - ps aux | grep X shows one process /usr/bin/X running.

  Read the article

• How to do custom sorting using unix sort?

  - by jewelia

  I'm using unix sort to sort a comma delimited file with multiple columns. Thus far, this has worked perfectly for sorting the data either numerically or in alphabetical order: Example file before any sorting: C,United States,WA,Tacoma,f,1 A,United States,MA,Boston,f,0 B,United States,NY,New York,f,5 A,Canada,QC,Montreal,f,2 A,Bahamas,Bahamas,Nassau,f,2 A,United States,NY,New York,f,1 Sort the file: $ sort -t ',' -k 2,2 -k 3,3 -k 4,4 -k 5,5r -k 6,6nr tmp.csv Sorted result: A,Bahamas,Bahamas,Nassau,f,2 A,Canada,QC,Montreal,f,2 A,United States,MA,Boston,f,0 B,United States,NY,New York,f,5 A,United States,NY,New York,f,1 C,United States,WA,Tacoma,f,1 Here is the issue: I want to sort column 2 based on a custom sort, meaning I want United States first, then Canada, then Bahamas: Desired sort: A,United States,MA,Boston,f,0 B,United States,NY,New York,f,5 A,United States,NY,New York,f,1 C,United States,WA,Tacoma,f,1 A,Canada,QC,Montreal,f,2 A,Bahamas,Bahamas,Nassau,f,2 Is there some way to pass unix sort a custom sort order that it can then apply? Something like: $ sort -t ',' -k 2,2:'United States, Canada, Bahamas' -k 3,3 -k 4,4 -k 5,5r -k 6,6nr tmp.csv Thanks!

  Read the article

• Mystery Print Separator Page

  - by Jesse Bradlee

  Good morning! After a recent site upgrade to WebSphere 7.0 from 6.1 on an AIX server, our users reported a print separator page appearing on a certain type of report, and only on one printer. Trouble is, no one (devs, sysadmins, users) knows where it came from or where to turn it off. Based on the info, the first step was to check the app, but we don't have print separators in our code. The report they're using also lacks even an option to separate. Then I asked the WebSphere gurus but they shook their heads. Ditto the network/print server team. If anyone can identify the source of this separator, I can take that back to the relevant team and have it switched off. They look like this (some whitespace removed for brevity): *################################################## *################################################## *################################################## *************************************************** TITLE: [document name] TIME PRINTED: Fri Sep 20 08:21:45 2013 TIME QUEUED: Fri Sep 20 08:21:45 2013 PRINTED AT: hp@hp41 (generic) @ [app name] SUBMITTED BY: root DELIVER TO: =====> root <===== *************************************************** FLAG VALUES: a-0, b=0, d=a, f=, g=1, h=, i=0, j=+, l=00, p=10, t=0, v=6, w=3--, x=2, A=1, B=gn, C=!, H=, J=+, L=+, N=1, P=[printer name]:hp@hp41, X=ISO8859-1, Z=+, 0=ibm.850 *************************************************** Thank you!

  Read the article

• Prolific USB-to-Serial Comm Port significantly slower under Windows 7 comparing to Windows XP

  - by Dmitry S

  Not sure if this question should be asked here or on SuperUser but if we get an answer here it may be useful for others here I am using a Prolific USB-to-Serial adapter based on the Prolific chip to use with a device on serial port. I have the latest version of the driver installed: 1.3.0 (2010-7-15). When I use my device with this adapter on my main Windows 7 (32bit) system it takes 8-9 seconds to send a command through to the device. However, when I do the same thing on a different Windows XP system (an old laptop I borrowed for testing) it only takes 2-3 seconds. I have made sure that the port settings and other variables are the same between systems. I also tested on a third laptop (also running Windows 7) and again got a significant delay. So the question is if anyone else experienced the same problem and found a solution. I would like to avoid moving to an XP system for what I need to achieve so that's my last option. Thanks in advance.

  Read the article

• Windows 7 - Windows XP - sharing - why isn't working?

  - by durumdara

  Hi! This is seems to be "hardware" and not "software" / "programming" question, but I need to use this share in my programs, so it is "close to programming". We had an XP based wireless network. The server is XP Professional, the clients are XP Home (Notebooks). This was working well with folder sharing (with user rights, not simple share). Then we replaced the one of the notebook with Win7/X64 notebook. First time this can reach the server, and the another client too. Later I went to another sites, and connect to another servers, another networks. And then, when I return to this network, I saw that I cannot connect to this server. Nothing of resources I see, and when try to dbl click on this computer, I got login window, where I can write anything, never I can login... The interesting part, that: Another XP home can see the server, can login as quest, or with other user. The server can see the XP home notebook. The Win7 can see the notebook's shared folders, and XP home can see the Win7 shared folders. The server can see the Win7 folders, BUT: the Win7 cannot see the server folders. Cannot see the resources too... The Win7 is in "work networking group", the group name is not mshome. I tried everything on the server, I tried to remove MS client, restore it with simple sharing, set guest password, etc., but I lost the possibilities to access this server from Win7. Does anyone have any idea what I need to see, what I need to set to access these resource - to use them in my programs? Thanks for every info, link: dd

  Read the article

< Previous Page | 719 720 721 722 723 724 725 726 727 728 729 730  | Next Page >