Search Results

Search found 65997 results on 2640 pages for 'custom post type'.

Page 725/2640 | < Previous Page | 721 722 723 724 725 726 727 728 729 730 731 732  | Next Page >

• How do I install the latest version of packages in Ubuntu?

  - by Roman

  For example I want to install the latest version of "numpy". I type the following: "sudo apt-get install python-numpy". When I type this the first time it installs something and if I type this the second time it writes that I have already the latest version of numpy. However, I see that my version of numpy is 1.1.1. and I know that it NOT the latest version. Why it happens and how this problem can be solved? I can find the *tar.gz file with the latest version, I can extract files with the archive and than I need to rune one of the scripts which will be somewhere among the extracted files. But I do not like this way. It is too complicated. I do not know where I should put all these files, I do not know which dependencies I should install before I run the script for the installation of numpy, I do not know where numpy will be put after installation and so on. Is there an easy way to get the latest version of numpy?

  Read the article

• Replacing latex with unicode symbols

  - by Elazar Leibovich

  Often, during a conversation or an email, or at a forum, I would like to type some math, but I don't need full equation support. Unicode symbols should suffice. What I need is an easy way to type math related unicode symbols. Since I already know latex, it makes sense to use the latex symbol mnemonics to type the math symbols. What I currently did is to write an AutoHotKey script which automatically replaces \latexSymbol with the corresponding unicode symbol, using the "hotstrings" AutoHotKey feautres. However, the AutoHotKey hotstrings proved unstable for many strings. Having a couple of tens lines would cause AHK to fail recognizing the strings from time to time. Any other solution? (No, Alt+unicode number isn't convenient enough) Attached is my AHK script. The PutUni function is taken from here. ::\infty:: PutUni("e2889e") return ::\sum:: PutUni("e28891") return ::\int:: PutUni("e288ab") return ::\pm:: PutUni("c2b1") return ::\alpha:: PutUni("c991") return ::\beta:: PutUni("c992") return ::\phi:: PutUni("c9b8") return ::\delta:: PutUni("ceb4") return ::\pi:: PutUni("cf80") return ::\omega:: PutUni("cf89") return ::\in:: PutUni("e28888") return ::\notin:: PutUni("e28889") return ::\iff:: PutUni("e28794") return ::\leq:: PutUni("e289a4") return ::\geq:: PutUni("e289a5") return ::\sqrt:: PutUni("e2889a") return ::\neq:: PutUni("e289a0") return ::\subset:: PutUni("e28a82") return ::\nsubset:: PutUni("e28a84") return ::\nsubseteq:: PutUni("e28a88") return ::\subseteq:: PutUni("e28a86") return ::\prod:: PutUni("e2888f") return ::\N:: PutUni("e28495") return

  Read the article

• Desktop virtualization

  - by gurpal2000

  Is there currently a proper Type 1 "desktop" hypervisor? Either free or not? This is just for tinkering around at home on some beefy Phenom machines. Basically i want to be able to run say 2 OSs on the same PC but without loading windows or a heavy flavour of linux and then use a hotkey to switch between them. I should get full performance out of them. So do i need something better than vmware workstation and/or virtualbox. I think these are "Type 2"? I already run VMWare w/s and VBox but is there a more performant solution? I saw a YouTube video from Citrix where a laptop was running XP and Vista. With the touch of a hot key they could switch between them. There was no visible underlying OS (there might be a hypervisor)? I have access to Citrix XenDesktop 3 enterprise edition evaluation. I realise this isn't for desktops but can i achieve my goal (geekiness) ? If i use the free XenServer 5.5.0 how do my client PCs access windows/linux/whatever from the xenserver? Is it via a thin client RDP type application? If so if there one for both windows and linux? Also if i do use XenServer can i use USB in either direction? What is Citrix receiver can i use that for (3) ? If so, is there some hotkey i can configure? whatever client is used to access the server software (whether it be on a different server or local) can i get full opengl/directx acceleration? what about Xen? i tried the Xen LiveCD but no clue as how to configure it. As you can see much confusion. Any help/pointers welcome. Cheers.

  Read the article

• Filezilla client unable to get directory listing from Filezilla Server (Windows)

  - by sestocker

  I've set up a self signed certificate in FileZilla server and enabled FTP over SSL/TPS. When I connect from the client FileZilla, I am able to authenticate but cannot get a directory listing: Status: Connecting to MY_SERVER_IP:21... Status: Connection established, waiting for welcome message... Response: 220-FileZilla Server version 0.9.39 beta Response: 220-written by Tim Kosse ([email protected]) Response: 220 Please visit http://sourceforge.net/projects/filezilla/ Command: AUTH TLS Response: 234 Using authentication type TLS Status: Initializing TLS... Status: Verifying certificate... Command: USER MYUSER Status: TLS/SSL connection established. Response: 331 Password required for MYUSER Command: PASS ******** Response: 230 Logged on Command: PBSZ 0 Response: 200 PBSZ=0 Command: PROT P Response: 200 Protection level set to P Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I Command: PORT 10,10,25,85,219,172 Response: 200 Port command successful Command: MLSD Response: 150 Opening data channel for directory list. Response: 425 Can't open data connection. Error: Failed to retrieve directory listing I have ports 21 and 50001 through 50005 open on the firewall. We are migrating servers - the 50001 - 50005 is one of the things that helped get FTPS working on the old server. I'm not sure this installation would use the same ports? What else could be the problem?

  Read the article

• What does this mean: "SATP VMW_SATP_LOCAL does not support device configuration"?

  - by Jason Tan

  Can anyone tell me what this means in ESXi 5.1?: SATP VMW_SATP_LOCAL does not support device configuration I've googled it and I get a lot of results, but as yet all the pages that contain the string are discussing other matters. The storage array is a HDS HUS-VM and the hosts are HP b460c G8 blades with flex fabric and flex fabric VCs which I am in the process of commissioning and would like to get it started on the right foot - i.e. error and warning free! naa.600508b1001c56ee3d70da65f071da23 Device Display Name: HP Serial Attached SCSI Disk (naa.600508b1001c56ee3d70da65f071da23) Storage Array Type: VMW_SATP_LOCAL Storage Array Type Device Config: SATP VMW_SATP_LOCAL does not support device configuration. Path Selection Policy: VMW_PSP_FIXED Path Selection Policy Device Config: {preferred=vmhba0:C0:T0:L1;current=vmhba0:C0:T0:L1} Path Selection Policy Device Custom Config: Working Paths: vmhba0:C0:T0:L1 Is Local SAS Device: true Is Boot USB Device: false This is the same LUN: ~ # esxcli storage core device list -d naa.60060e80132757005020275700000016 naa.60060e80132757005020275700000016 Display Name: HITACHI Fibre Channel Disk (naa.60060e80132757005020275700000016) Has Settable Display Name: true Size: 204800 Device Type: Direct-Access Multipath Plugin: NMP Devfs Path: /vmfs/devices/disks/naa.60060e80132757005020275700000016 Vendor: HITACHI Model: OPEN-V Revision: 5001 SCSI Level: 2 Is Pseudo: false Status: degraded Is RDM Capable: true Is Local: false Is Removable: false Is SSD: false Is Offline: false Is Perennially Reserved: false Queue Full Sample Size: 0 Queue Full Threshold: 0 Thin Provisioning Status: unknown Attached Filters: VAAI_FILTER VAAI Status: supported Other UIDs: vml.020001000060060e801327570050202757000000164f50454e2d56 Is Local SAS Device: false Is Boot USB Device: false ~ #

  Read the article

• Forwarding HTTP Request with Direct Server Return

  - by Daniel Crabtree

  I have servers spread across several data centers, each storing different files. I want users to be able to access the files on all servers through a single domain and have the individual servers return the files directly to the users. The following shows a simple example: 1) The user's browser requests http://www.example.com/files/file1.zip 2) Request goes to server A, based on the DNS A record for example.com. 3) Server A analyzes the request and works out that /files/file1.zip is stored on server B. 4) Server A forwards the request to server B. 5) Server B returns file1.zip directly to the user without going through server A. Note: steps 4 and 5 must be transparent to the user and cannot involve sending a redirect to the user as that would violate the requirement of a single domain. From my research, what I want to achieve is called "Direct Server Return" and it is a common setup for load balancing. It is also sometimes called a half reverse proxy. For step 4, it sounds like I need to do MAC Address Translation and then pass the request back onto the network and for servers outside the network of server A tunneling will be required. For step 5, I simply need to configure server B, as per the real servers in a load balancing setup. Namely, server B should have server A's IP address on the loopback interface and it should not answer any ARP requests for that IP address. My problem is how to actually achieve step 4? I have found plenty of hardware and software that can do this for simple load balancing at layer 4, but these solutions fall short and cannot handle the kind of custom routing I require. It seems like I will need to roll my own solution. Ideally, I would like to do the routing / forwarding at the web server level, i.e. in PHP or C# / ASP.net. However, I am open to doing it at a lower level such as Apache or IIS, or at an even lower level, i.e. a custom proxy service in front of everything. Thanks.

  Read the article

• Access denied error 3221225578 with file sharing to Windows server

  - by Ian Boyd

  i'm trying to access the shares on a server. The credential box appears, and i enter in a correct username and password, and i get access denied. The silly thing is that i can Remote Desktop to the server (using the same credentials), and i can check the Security event log for the access denied errors: Event Type: Failure Audit Event Source: Security Event Category: Account Logon Event ID: 681 Date: 3/19/2011 Time: 11:54:39 PM User: NT AUTHORITY\SYSTEM Computer: STALWART Description: The logon to account: Administrator by: MICROSOFT_AUTHENTICATION_PACKAGE_V1_0 from workstation: HARPAX failed. The error code was: 3221225578 and Event Type: Failure Audit Event Source: Security Event Category: Logon/Logoff Event ID: 529 Date: 3/19/2011 Time: 11:54:39 PM User: NT AUTHORITY\SYSTEM Computer: STALWART Description: Logon Failure: Reason: Unknown user name or bad password User Name: Administrator Domain: stalwart Logon Type: 3 Logon Process: NtLmSsp Authentication Package: NTLM Workstation Name: HARPAX Looking up the error code (3221225578), i get an article on Technet: Audit Account Logon Events By Randy Franklin Smith ... Table 1 - Error Codes for Event ID 681 Error Code Reason for Logon Failure 3221225578 The username is correct, but the password is wrong. Which would seem to indicate that the username is correct, but the password is wrong. i've tried the password many times, uppercase, lowercase, on different user accounts, with and without prefixing the username with servername\username. What gives that i cannot access the server over file sharing, but i can access it over RDP?

  Read the article

• BIND9 server types

  - by aGr

  I was configuring DNS on my server using BIND9, everything seems to work, but I have a question regarding my config file. I've ended up with this configuration in /etc/bind/named.conf.local zone "example.com" { type master; file "/etc/bind/db.example.com"; allow-transfer { 192.168.1.1; }; }; zone "1.168.192.in-addr.arpa" { type master; notify no; file "/etc/bind/db.192"; allow-transfer { 192.168.1.1; }; }; forwarders { 10.253.22.140; 10.253.22.141; }; I've read about the different type of dns server, like primary master etc. The first two parts (zone and zone) corresponds to primary dns server configuration. First record for "classic" lookup, second one for reverse. The last part (forwarders) is configuration of cache-server and contains the ISP's IP of DNS server. So all names resolved thanks to this server will be cached. Simple question: am I right? Does my description make sense? Or one server can be only either master or either cached?

  Read the article

• How to set only specific nginx server block into maintenance mode programmatically

  - by Ville Mattila

  I am looking for a solution to automate one of our application's deployment process. In the beginning of deployment, I would like to programmatically set the specified server into maintenance mode and finally after the deployment has been completed, remove the maintenance mode flag from the nginx server. By maintenance mode, I mean that nginx should response with HTTP Response Code 503 to all the requests (with possible custom page). I know how to set the server block to respond with 503 code (see http://www.cyberciti.biz/faq/custom-nginx-maintenance-page-with-http503/) but the question is about how to do this programmatically and most efficiently. Two options have came to my mind: Option 1: At the beginning of the deployment process, write a maintenance file into document root and conditionally check an existence of the maintenance file in nginx server config: server { if (-f $document_root/in_maintenance_mode) { return 503; } } This method contains certain overhead as the file existence is checked for each request. Is it possible to check the file existence only when loading the nginx config? Option 2: Deployment script replaces the whole nginx server configuration file with a maintenance version and swaps it back in the end of the deployment. If this method is used, I am concerned about possible other automation processes like puppet that may be override the maintenance configuration file.

  Read the article

• How can I do a large file upload using Sinatra, haml, nginx, and passenger?

  - by mmr

  Hi all, I need to be able to allow a user to upload 30-60 mb files at a time. Right now, I'm solving the problem with a simple form post: %form{:action=>"/Upload",:method=>"post",:enctype=>"multipart/form-data"} - @theModelHash.each do |key,value| %br %input{:type=>"checkbox", :name=>"#{key}", :value=>1, :checked=>value} =key %br %input{:type=>"file",:name=>"file"} %input{:type=>"submit",:value=>"Upload"} This form allows the user to select processing options contained in theModelHash and upload a file for processing. Problem is, this method both freezes the user's UI and also requires that the entire form be reposted when the user presses the 'back' button. I've looked at SWFUpload, but have no idea how to integrate that into my relatively simple app. There's a page here about integrating it with Rails, but I'm using Sinatra, and am new enough to this whole web programming thing that I don't know how to modify those files to work with what I need to do. Is there a how-to to add large file uploads to my form there? Something relatively simple that just adds in a progress bar and doesn't repost? I feel like I'm having to triple the size of my application just to make this feature play nice, and that's bothering me a bit.

  Read the article

• Cannot browse remote networks even with WINS configured

  - by paradroid

  As the NetBIOS protocol acts on Layer 2 and so is not routable, In order to enable network browsing of remote networks, WINS has been installed and configured on two domain controllers, both of which are on different networks. The WINS servers seem to be replicating with eachother, and each has 127.0.0.1 set as the Primary WINS Server in each of their LAN interface properties, with nothing entered for Secondary WINS Server. The DC which holds the PDC Emulator FSMO role has the Computer Browser service running and set to Auto start, and it has the WINS/NBT node type network setting at 0x8 (H-node - Hybrid node). Remote network browsing does not work. Is the WINS/NBT node type correct for this scenario? The reason why I think it may not be the right one is because I set the DHCP Server's 046 WINS/NBT node type option to 0x8 as well, after which the DHCP clients started to disappear from the Network folders. When that option is not set, does it default to B-node (Broadcast node)? Or could it be a problem with the WINS servers setup?

  Read the article

• Logging into Local Statusnet instance on Apache causes browser to download a file

  - by DilbertDave

  I've installed statusnet 0.9.1 on a Windows Server via the WAMP stack and on the whole it seems to be fine. However, when logging in using IE7 or Chrome the browers invoke a file download, i.e. the File Download dialog is displayed. In IE7 the file is called notice with the content below (some parts starred out): <?xml version="1.0" encoding="UTF-8"?> <OpenSearchDescription xmlns="http://a9.com/-/spec/opensearch/1.1/"> <ShortName>Mumble Notice Search</ShortName> <Contact>david.carson@*****.com</Contact> <Url type="text/html" method="get" template="http://voice.*****.com/mumble/search/notice?q={searchTerms}"></Url> <Image height="16" width="16" type="image/vnd.microsoft.icon">http://voice.*****.com/mumble/favicon.ico</Image> <Image height="50" width="50" type="image/png">http://voice.******.com/mumble/theme/cloudy/logo.png</Image> <AdultContent>false</AdultContent> <Language>en_GB</Language> <OutputEncoding>UTF-8</OutputEncoding> <InputEncoding>UTF-8</InputEncoding> </OpenSearchDescription> In Chrome (Linux and Windows!) the file is called people and contains similar XML. This is not an issue when logging in using FireFox. This is obviously a configuration issue but I'm not having much luck tracking it down. I tested the previous version of Statusnet on an Ubuntu Server VM on our network and it worked fine for months. Thanks In Advance

  Read the article

• nginx error page and internal directives not working as expected

  - by Romain

  I'd like to setup my nginx server to return a specific error page on HTTP 50x status codes, and I'd like this page to be unavailable by a direct request from users (e.g., http//mysite/internalerror). For that, I'm using nginx's internal directive, but I must be missing something, as when I put that directive on my /internalerror location, nginx returns a custom 404 error (which isn't even my own 404 error page) when a page crashes. So, to summarize, here's what seems to happen: GET /Home nginx passes the query to Python I'm simulating an application bug to get the 502 error code nginx tries to return /InternalError from its error_page rule because of the internal rule, it finally fails back to a custom 404 error code <-- why? the documentation says error_page directives are not concerned by internal: http://wiki.nginx.org/HttpCoreModule#internal Here's an extract from nginx.conf with a few comments to point things out: error_page 404 /NotFound; error_page 500 502 503 504 =500 /InternalError; # HTTP 500 Error page declaration location / { try_files /Maintenance.html $uri @pythonbackend; } location @pythonbackend { include uwsgi_params; uwsgi_pass unix:///tmp/uwsgi.sock; } location ~* \.(py|pyc)$ { # This internal location works OK and returns my own 404 error page internal; } location /__Maintenance.html { # This one also works fine internal; } location ~* /internalerror { # This one doesn't work and returns nginx's 404 error page when I trigger an error somewhere on my site internal; } Thanks very much for your help!!

  Read the article

• django : nginx : jquery css not being served

  - by PlanetUnknown

  I'm using apache+mod_wsgi for django. And all css/js/images are served through nginx. For some odd, reason when others/friends/colleagues try accessing the site, jquery/css is not getting loaded for them, hence the page looks jumbled up. My html files use code like this - <link rel="stylesheet" type="text/css" href="http://x.x.x.x:8000/css/custom.css"/> <script type="text/javascript" src="http://1x.x.x.x:8000/js/custom.js"></script> My nginx configuration in sites-available is like this - server { listen 8000; server_name localhost; access_log /var/log/nginx/aa8000.access.log; error_log /var/log/nginx/aa8000.error.log; location / { index index.html index.htm; } location /static/ { autoindex on; root /opt/aa/webroot/; } } There is a directory /opt/aa/webroot/static/ which have corresponding css & js directories. The odd thing is that the pages show fine when I access them. I have cleared my cache/etc, but the page loads fine for me, from various browsers. Also, I don't see any 404 any error in the nginx log files. Actually the logs for nginx are not getting refreshed at all. I restarted the nginx server using root, is that incorrect ? There is a user www-data defined in the nginx configuration file. Any pointers would be great.

  Read the article

• Cannot find network path for computer in workgroup of home Windows XP PCs

  - by John Galt

  VMWare Workstation 6.5 is running as an app on a Windows Vista 64bit PC host. Thanks to Workstation we have 2 guest machines running: TerriVM and MattVM (both of these run Windows XP SP2). We are attempting to get virtual networking configured so we can access the files of both of these VM guest systems from other real PCs connected to this home network. We think we are close but we can't quite get it right... Here is what we've done so far: * On VM Workstation, we set "Host Virtual Network Mapping" to use VMnet0 with the setting "Bridge to an automatically chosen adapter". * On each VM guest (i.e. using Windows explorer on XP), we rightmouse on the C disk, click "Sharing" tab, set shareName to "C_Disk" and check both boxes labeled "Share this folder on the network" and "Allow network users to change my files". Symptoms: On "JohnsRealXP" PC, we go to Windows Explorer, My Computer, Map Network Drive, type into Folder textbox: \TerriVM\C_Disk and assign drive letter T. We see all the folders on this shared drive and can open files on them. So that is good. On same "JohnsRealXP" PC, we go to Windows Explorer, My Computer, Map Network Drive, type into Folder textbox: \MattVM\C_Disk and assign drive letter M. We get a message box "_The network path \mattvm\C_Disk could not be found_". Alternatively, we type just \mattvm\ into the Folder box and click "Browse" and get a dialog box where we drill down from "Entire Network" to "Microsoft Windows Network" to "Workgroup" where both TerriVM and MattVM are listed as computers on the network. Clicking the + sign next to MattVM gives an hourglass and never enables the OK button and I have to cancel. In summary, I think we've attempted to share both of these virtual machines using the same techniques and connect to them in similar fashion, but one connects properly and the other machine can be seen but no shared resources on it can be accessed. Can anyone suggest something possibly overlooked or something to try? Thanks so much in advance.

  Read the article

• nginx and proxy_hide_header

  - by giskard

  When I curl for a URL I get this answer back: > < HTTP/1.1 200 OK < Server: nginx/0.7.65 < Date: Thu, 04 Mar 2010 12:18:27 GMT < Content-Type: application/json < Connection: close < Expires: Thu, 04 Mar 2010 12:18:27 UTC < http.context.path: /1/ < jersey.response: com.sun.jersey.spi.container.ContainerResponse@17646d60 < http.custom.headers: {Content-Type=text/plain} < http.request.path: /2/messages/latest.json < http.status: 200 < Transfer-Encoding: chunked I want to remove < http.context.path: /1/ < jersey.response: com.sun.jersey.spi.container.ContainerResponse@17646d60 < http.custom.headers: {Content-Type=text/plain} < http.request.path: /2/messages/latest.json < http.status: 200 So I used the proxy_hide_header directive in this way: location / { if ($arg_id) { proxy_pass http..authorized; break; } proxy_pass http..anonymous; proxy_hide_header http.context.path; proxy_hide_header jersey.response; proxy_hide_header http.request.path; proxy_hide_header http.status ; } But it doesn't work. any clues?

  Read the article

• How do I make wallpaper fit both monitors in dual monitor setup?

  - by Ben

  I am deploying some custom corporate wallpaper as part of a Windows 7 rollout. Some people will be using dual monitors, and the additional monitors may be either 4:3 or widescreen. I want to use the same wallpaper on both screens (i.e. 2 copies of the same wallpaper, not stretched across both.) If I set the background to "stretch", it uses the aspect ratio of the primary monitor to stretch the wallpaper on both monitors. So, for example, if I have a dual monitor setup using a 4:3 TFT as primary and my (widescreen) laptop LCD as secondary - the image shows on the laptop LCD in 4:3, with a black stripe down either side. I've only noticed this as an issue with my "custom" wallpaper. Both the default MS wallpaper and the built in Lenovo wallpaper don't seem to have this issue. Is this by using "trickery" such as using an image larger than the largest resolution you will have and centering it? (i.e. so you crop out part of the image.) Or can this be done "properly"? I don't want to use 3rd party software to do this, but would happily do a bit of Powershell scripting if this would solve the issue. Thanks in advance, Ben

  Read the article

• ssh_exchange_identification: Connection closed by remote host

  - by rick

  Firstly, I know that this question has been asked a million times, and I have read everything I can find and still cannot fix the problem. i am encountering this issue when ssh'ing in from my mac to my Ubuntu server on a fresh install of Ubuntu (I reinstalled because of this issue). I have SSH portmapped to 7070 because my ISP is blocking 22. On the client: bash: ssh -p 7070 -v [email protected] debug1: Reading configuration data /etc/ssh_config debug1: Connecting to address.org port 7070. debug1: Connection established. debug1: identity file /home/me/.ssh/identity type -1 debug1: identity file /home/me/.ssh/id_rsa type 1 debug1: identity file /home/me/.ssh/id_dsa type -1 ssh_exchange_identification: Connection closed by remote host Here's what I have done to try to resolve the issue: Made sure my maxstartups is ok: bash: grep MaxStartups /etc/ssh/sshd_config #MaxStartups 10:30:60 Made sure hosts.deny is clear of denials. Made sure hosts.allow has my client IP. Clear out known_hosts on client Changed ownership of /var/run to root Made sure etc/run/ssh is Made sure /var/empty exists Reinstall openssh-server Reinstall ubuntu When I run telnet localhost, I get this: telnet localhost Trying ::1... Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection refused When I run /usr/sbin/sshd -t Could not load host key: /etc/ssh/ssh_host_rsa_key Could not load host key: /etc/ssh/ssh_host_dsa_key When I regenerate the keys with ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key ssh-keygen -t dsa -f /etc/ssh/ssh_host_dsa_key I get the same error. I am pretty sure this is the issue. Can anyone help?

  Read the article

• esxi 5 monitoring

  - by user134880

  I'm new to esxi/vmware world. Have few question about monitoring esxi host. Now I'm using trial versian esxi 5.1 I can see performance charts in vShpere client. Cool. But I want to export this raw data (raw - I mean cvs,txt or some format which I can parse later) to other server to be able to parse this data later and create custom charts. (please do not advise to try vCenter, I need custom charts etc.) I could run esxtop in batch mode and use this data... But... How does vShpere client performance charts work? Where client takes data for charts? So if I will use esxtop batch mode it will add extra load to server. Is it possible to use same source as vSphere client use for charts? There is /var/lib/vmware/hostd/stats/hostAgentStats-20.stats file. Its looks like it is binary format. As I understood it is exactly data which I need?!?! Any ideas how to parse it? Thanks! PS: maybe some one know where to find, if there is one, info about processes running on esxi host?

  Read the article

• Keeping Xv Overlay configuration throughout an X session.

  - by kriss

  After upgrading my Linux system from Ubuntu 9.04 to Ubuntu 10.10, I suceeded correcting most problems (all related to Intel 82865G Integrated Graphics Adapter support and compiz is still not working but that's another matter) but for one I only have a partial solution. Whenever I play a video the colors are much too saturated. This is really a problem for tones of skins that appears reddish (everyone seems to be coming back from a ski vacation with deep sun burns). As this effect only occurs with videos, not with pictures, I finally figured out it was related to Video Overlays configuration and I can correct it typing: xvattr -a XV_SATURATION -v 120 This change the default saturation value, which is 500 and much too high in my case, at eye sight the correct value seems to be between 100 and 150. Now my problem is that I have to type the above command each time I run a video. If I type it before running the video it has no effect, if I close the video and open a new one, I have to type it again, etc. I tried to put it in Xsession and (logically) it has no effect either. How could I do to get the correct setting whenever I run a video without typing the above command every time ?

  Read the article

• Tridion 2011 SP1 Core Service - expose to live server within PROD env

  - by Neil

  We have a requirement to allow our users to submit information about their "projects" - a small piece of text and single image they upload. Ultimately we'll have a listing page of user contributed projects that others can comment on and rate. We've decided to user Tridion's UGC for rating & comments site-wide for this first phase which has got me thinking - UGC is tied to Tridion published pages & components, if we want UGC on our user-submitted projects, they'll have to be created within Tridion as components themselves, not be sat in some custom db table? Is this where the Core Service could come in? My understanding is that the CD Web Service is for retrieval, not for interacting with the Content Manager. Is it OK (!) architecturally to expose the Core Service only to our live application servers so our backend .NET code can create "project components" that can be then be published by editors allowing them to be commented on? Everything sounds pretty neat and tidy apart from the "exposing Core Service to live servers" bit. Without this though I'd have to write a custom way to "transfer" it back over to the Content Manager - maybe like Audience Manager Sync works? Anyone done this before?

  Read the article

• Vyatta internet connection + hosted site on same IP

  - by boburob

  Having a small issue setting up a vyatta. The company internet and two different websites are both on the same IP. Server 1 - Has websites hosted on ports 1000 and 3000 and also has a proxy server installed to provide internet connection to the domain Server 2 - Has a website hosted on ports 80 and 433 The vyatta is correctly natting the appropriate traffic to each server, and allowing the proxy to get internet traffic, however I have a problem getting to the websites hosted on these two servers inside the domain. I believe the problem is that the HTTP request is being sent with an IP, eg: 12.34.56.78. The request will reach the website and the server will attempt to send the request back to the IP, however this is the IP of the Vyatta, so it has nowhere else to go. I thought the solution would be something like this: rule 50 { destination { address 12.34.56.78 port 1000 } inbound-interface eth1 inside-address { address 10.19.2.3 } protocol tcp type destination } But this doesnt seem to do it! UPDATE I changed the rules to the following: rule 50 { destination { address 12.34.56.78 port 443 } outbound-interface eth1 protocol tcp source { address 10.19.2.3 } type masquerade } rule 51 { destination { address 12.34.56.78 port 443 } inbound-interface eth1 inside-address { address 10.19.2.2 } protocol tcp type destination } I am now seeing traffic going between the two with Wireshark, but the website will still fail to load.

  Read the article

• can't ssh from mac to windows (running ssh server on cygwin)

  - by Denise

  I set up an ssh server on a fresh windows 7 machine using the latest version of cygwin. Disabled the firewall. I can ssh into it from itself, from a different windows box (using winssh), and from a linux vm. In spite of that, I tried to ssh in from two different macs, and neither would let me! This is the debug output: OpenSSH_5.1p1, OpenSSL 0.9.7l 28 Sep 2006 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to 3dbuild [172.18.4.219] port 22. debug1: Connection established. debug1: identity file /Users/Denise/.ssh/identity type -1 debug1: identity file /Users/Denise/.ssh/id_rsa type 1 debug1: identity file /Users/Denise/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.5 debug1: match: OpenSSH_5.5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '3dbuild' is known and matches the RSA host key. debug1: Found key in /Users/Denise/.ssh/known_hosts:43 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Trying private key: /Users/Denise/.ssh/identity debug1: Offering public key: /Users/Denise/.ssh/id_rsa Connection closed by [ip] It shows the same output, and fails at the same place, whether I have put my public key on the ssh server or not. Any help would be appreciated-- hopefully someone has run into this before?

  Read the article

• Converting software RAID1 to RAID10 for /boot

  - by luckytaxi

  Array info: /dev/md0 - /dev/sda1 and /dev/sdb1 /dev/md2 - /dev/sda2 and /dev/sdb2 Partition info: /boot - /dev/md0 / - /dev/md1 I have two drives that are setup as RAID1 using software RAID on Redhat. I added two additional drives (same size) and I would like to conver the RAID1 to a RAID10. The problem I'm having is adding the last drive to the array. I've gotten as far as creating a RAID10 with two missing devices but as soon as I add the last drive, all hell breaks loose. It seems /dev/sda1 is the culprit. What I'm not too sure about is how to create the RAID10. I've tried the following mdadm --create /dev/md2 --level=raid10 --raid-device=4 /dev/sdc1 missing /dev/sdd1 missing I then proceeded to fail /dev/sdb1 from /dev/md0 and added that partition to /dev/md2. I proceeded to install the MBR on EACH partition since boot resides on /dev/sdx1 on each drive. As a test, all is well, I'm able to boot back into the system once I do a quick reboot. Now, when I go add the last drive /dev/sda1, it breaks. I attempted to install grub on /dev/sda1 and I get the following ... grub> root (hd0,0) /dev/sda root (hd0,0) /dev/sda Filesystem type is ext2fs, partition type 0xfd grub> setup (hd0) setup (hd0) Checking if "/boot/grub/stage1" exists... no Checking if "/grub/stage1" exists... no Error 2: Bad file or directory type At this point, the array is hosed I believe. I rebooted the server and it refuses to boot.

  Read the article

• What is the best way to recover from a mysql replication fail?

  - by Itai Ganot

  Today, the replication between our master mysql db server and the two replication servers dropped. I have a procedure here which was written a long time ago and i'm not sure it's the fastest method to recover for this issue. I'd like to share with you the procedure and I'd appreciate if you could give your thoughts about it and maybe even tell me how it can be done quicker. At the master: RESET MASTER; FLUSH TABLES WITH READ LOCK; SHOW MASTER STATUS; And copy the values of the result of the last command somewhere. Wihtout closing the connection to the client (because it would release the read lock) issue the command to get a dump of the master: mysqldump mysq Now you can release the lock, even if the dump hasn't end. To do it perform the following command in the mysql client: UNLOCK TABLES; Now copy the dump file to the slave using scp or your preferred tool. At the slave: Open a connection to mysql and type: STOP SLAVE; Load master's data dump with this console command: mysql -uroot -p < mysqldump.sql Sync slave and master logs: RESET SLAVE; CHANGE MASTER TO MASTER_LOG_FILE='mysql-bin.000001', MASTER_LOG_POS=98; Where the values of the above fields are the ones you copied before. Finally type START SLAVE; And to check that everything is working again, if you type SHOW SLAVE STATUS; you should see: Slave_IO_Running: Yes Slave_SQL_Running: Yes That's it! At the moment i'm in the stage of copying the db from the master to the other two replication servers and it takes more than 6 hours to that point, isn't it too slow? The servers are connected through a 1gb switch.

  Read the article

< Previous Page | 721 722 723 724 725 726 727 728 729 730 731 732  | Next Page >