Search Results

Search found 22332 results on 894 pages for 'internet explorer 8'.

Page 726/894 | < Previous Page | 722 723 724 725 726 727 728 729 730 731 732 733  | Next Page >

• How do I set my router up to authenticate with my service provider?

  - by João Lourenço

  Currently I have this setup: D-Link DSL2640U connected to the phone line: VPI/VCI 0/40, Service Category UBR Without PCR Service pppoe_0_40_3 Interface nas_0_40 Protocol Bridging (LLC/SNAP-Bridging) 802.11q not enabled Bridge Service Enabled Computers have individual PPPoE connections (in Network and Sharing Centre - Set up a new connection or network - Connect to the Internet - Broadband (PPPoE) - Username and Password) How would I move these settings on each individual PC to the router so that all I need to do is connect to the wireless? I have been unsuccessful setting up anything other than Windows PCs on the network (I have tried Macs, iOS and Nokia SmartPhones too). Thanks for the responses in advance!

  Read the article

• How do I rescue files from the encrypted home folder via live USB stick?

  - by Alexia

  I know, this has been asked and answered all over the internet already. However, I start feeling stupid, since the informations there are not helping me. Just this morning, I wanted to install the newest update to 13.10. After the download, when it came to the actual installing, the install program froze and didn't do anything for hours. At that time, I was still logged in. The computer was working and everything was accessable to me. However, I made the mistake and didn't immediately make safety copies of everything. Instead, I just rebooted. Long story short: My computer even fails to reset to a previous version via Grub. But I am able to boot from a USB stick and, after starting Nautilus, I see my home folder on the HD. I would now like to copy its contents onto an external harddisk. Problem 1: I have no rights to access the folder like that. Problem 2: It is encrypted. Problem 3: I don't know how to give myself the rights to access the folder nor do I know how to encrypt it. I assume that it might help that I still know these things: - my old login name - my old login phrase - a 32 characters long string of hexadecimal numbers that I copied to my list of passwords as "Ubuntu Encryption Code". I copied it digitally right after installing Ubuntu the first time and encrypting the home folder, so there won't be any typos. I am sure of that. The solutions that I saw so far, tell me that I need the "encryption phrase". But when I follow the instructions and use this phrase that I have in my list, I only get messages of denial. Can anyone help me through this special problem, please?

  Read the article

• How can I view a PDF in Firefox when the server specifies the wrong content type?

  - by Sam

  I am using Mozilla Firefox with a PDF viewer plug-in. The plug-in has been correctly associated with Adobe Reader files to view them in the browser in the settings. I would like to be able to view PDF files in Firefox rather than downloading them. This already works correctly when a web server indicates that a file has the Content-Type of application/pdf. However, some web servers provide other Content-Types for PDFs, such as application/octet-stream. (See this example of a PDF served with a non-pdf Content-Type.) I have looked at Firefox's MimeTypes.rdf file, and it appears to only support mapping applications based on file types for non-Internet-based files. How can I have Firefox view all PDF documents in-browser rather than only the ones with the application/pdf Content-Type?

  Read the article

• Dynamic to static internal IP address (Snow Leopard server)

  - by bac

  I purchased a new Mac mini server, since my old iMac, which was a server pretty much died. My problem is this. How do I change my internal IP address for my mac mini server to a static address, like 192.168.0.2? Before you guys harp on me, my old server was running Ubuntu Hardy and I only had to map the IP address in the router, which would automatically assign the reserved address through DHCP. Now, I know things are different between the two, but my problem is that the mac is not accepting the assigned IP address or the router just is not assigning. However, every time I have manually changed it on the Mac to an address of my choice, it takes the computer off the Internet. My router is a NetGear WTG624 v2, I believe. I need this to work, so I can utilize Dynamic DNS.

  Read the article

• In 2011, what are the reasons to stick with plain text mails?

  - by Aaron Digulla

  People entering college today have never known a world without an Internet. HTML was invented 1980, that's more than thirty years ago or 1.5 generations. But plain text mails are still common despite all their problems: Encoding issues Wrapped code segments No links No way to use the "a picture says more than a thousand words" lore Most of the security risks are now handled by the underlying browser engine and smart settings like: Don't allow JavaScript in mails Don't execute attachments Don't download external resources (like web bugs) On top of that, only very few people still read mail only in command line tools like Mutt. Knowing Mutt myself, I'm pretty sure you can configure it to display HTML mail with, say, w3m. On top of that, most HTML mail capable clients send two versions of the mail (pure text with an HTML attachment). I'm not sure if there are any people left on the planet which still use a 56kbit modem to access their mail accounts. So what reasons are left to stick with plain text mails in 2011?

  Read the article

• ADD ROUTE command in windows 2008R2

  - by Mehrdad Kamelzadeh

  I don't know much about Networking, So excuse me if I am raising some basic issues. I have a LAN where there is a Windows Server 2008R2 with some clients connected to it. The clients are not joined to the domain of the Server (they are in a WORKGROUP). I have set up a VPS on the server machine (PPTP) with a Static address pool of range 10.0.0.1 - 10.0.0.10 but the LAN range itself is 192.168.1.1 - 192.168.1.254. When I connect to the server from another location over the internet, I can just see the server and I can not see the other clients which are in the same LAN as the server. what to do to see the other clients? a friend of mine said that you should use the ADD ROUTE command. Beacuse of that I used this command as my title. What would be the best way to address this problem? Thanks

  Read the article

• Is It key_buffer or key_buffer_size?

  - by user176890

  I search the internet regarding the correct variable in my.cnf file. Some said that key_buffer_size is depreciated, but some said that key_buffer_size is the correct variable in my.cnf. So, what is really the correct variable here? Is it key_buffer or key_buffer_size? I'm using ubuntu 12.04. And also I have the two key_buffer variable in my.cnf file. This is what I got after installing mysql. The first one is located under this: [mysqld] key_buffer = 16M The other one is located under this: [isamchk] key_buffer = 16M

  Read the article

• How can I get data off of a damaged thumb drive?

  - by Lord Torgamus

  A guy I work with just came by to ask me about a damaged thumb drive/USB flash drive. Apparently his son dropped it on a hard surface and it won't power up anymore. They've tried plugging it into multiple machines without success, even though each port they tried was able to power other USB devices. He knows it's not a lost cause because a local tech store is offering to recover the data for $500, but he says they're not worth that much. I figured someone on SU would have an idea about this; he doesn't care about using the drive in the future, just wants to salvage a few files that would be a pain to recreate. Is this possible without advanced equipment, and if so, how? He said he already tried the advice on the Internet about typing in different drive letters and such, but that failed because there was no power going to the drive. He also said that he opened the case up at one point, but I'm not sure what, if anything, he did inside.

  Read the article

• Select firefox search result

  - by Nicolas C.

  I am working on a daily basis on a web application with very large menus. Also doing lots of other Excel manipulations, copy and pasting, etc., I am quite fond of keyboard shortcuts as much faster than using the mouse to point, double-click and then going back to my keyboard etc. Hence, my question is quite simple, does anyone know if there is any shortcut under Firefox which would let me actually select (and not highlight) in my web page the search result so that I can for instance do the following manipulation sequence? [Ctrl]+[F] type the search string, for instance 'regional_unit' the missing shortcut to actually select in my page the string which is currently highlighted thanks to the search feature of FF [Space] or [Enter] key to activate the web element which in my case would systematically correspond to a link or button, etc. May be there would be an addon replacing the default search feature, I don't know... I tried to look over the internet but with the words I am using for this investigation, I do not get relevant search results under Google :(. Thanks a lot

  Read the article

• Permission to see the expandable list of ISA Server 2006

  - by Hossein Mobasher

  I am working on ISA Server 2006 in Windows Server. I want to add some policy rules to my server, I followed this link. But It points to In the Microsoft Internet Security and Acceleration Server 2006 management console, expand the array name, and then click the Firewall Policy node. When I open the ISA Server 2006 Management Console, I can not show the expand list, how can I force ISA to show the expandable tree to start Firewall Policy? Could any one please help me to do this ? Note : I have administrator permission for my account. Thanks in advance :)

  Read the article

• Custom distro using ubuntu 12.04

  - by user89707

  I am creating the custom operating system using the ubuntu 12.04. When ubuntu login from the light dm -- it shows ubuntu desktop . i need to change to the my os name. I need to replace the ambaince dark icon to fs icon by default for all the login and live cd. How to permanentely change the os name It should not change even the customer update the operating system too. I am using the remastersys. I am looking to develop the new distro. like mint ,, If i had an breif explanation of the creation of the repository and maintaining the updates . it will be more helpfull. Kindly provind the link for creating the full fledged os based on the ubuntu .. like mint, Snowlinux, etc did.. replace the grub with burg for default installation If remastersys is not good . then provide me some other tool to create . I am not having the high speed internet

  Read the article

• Fortigate VPN Routing issue

  - by user1571299

  I have 200B Fortigate unit with 2 internet WAN connections. I also have a remote site which I'm connected to via IPSEC VPN through WAN1. This site has only one GW IP address. I'd also like to setup a VPN ontop of WAN2 with that specific site as it's destination. The default route for my end is WAN1. My problem is I cant figure out how to have both tunnels up at the same time. What's the best practice for achieving this? Thanks

  Read the article

• Acer Aspire 5542G overheating with ubuntu/kubuntu 12.04

  - by james

  I have an Acer Aspire 5542G laptop purchased couple of years ago. All these days, i used windows 7 on it . Then I tried ubuntu 12.04 . Everything was fine except the overheating issue. I updated ubuntu with all security fixes and available updates but nothing solved the problem. With idle use like internet browsing, the cpu fan speeds up a lot and i can feel very hot air coming from the vent (comparable to playing serious 3d game in windows). But it will not go to a point of freeze and shutdown. But as long as im using it, with no intensive tasks at all, the laptop stays too hot. This wasn't the case with windows7. In windows 7 the fan will not rotate at all with normal use. I heard there was manufacturing defect with some acer laptops, but i think it wasn't the case with my laptop since windows7 runs perfectly. I updated the bios to latest version. I cleaned dust in the vents. I tried kubuntu 12.04 up-to-date. Nothing solved the issue. My laptop specs are: CPU : AMD turion2 x2 M500 @ 2.2GHz GPU : AMD Mobility Radeon HD4570 3GB RAM and 320GB hard disk.

  Read the article

• Untangle VPN setup, how to see internal addresses?

  - by NFS user

  So Untangle is setup as the default gateway at 192.168.100.1/24, it is the authorative DHCP server issuing addresses from 192.168.100.100 to 192.168.100.200 and is successfully connected to the Internet. Untangle uses OpenVPN for remote access. Accessing the VPN gives me the address 192.168.40.5. However, I cannot ping any machines on the internal 192.168.100.x network remotely. Clearly, there is something basic that I am missing. What is it and how is it solved? Update: The VPN was not setup with the internal network. Since Untangle only allows editing the VPN setup once, the VPN had to be removed and reinstalled with the internal network exported. Now it works. The lesson is that the internal network must be setup before configuring the VPN.

  Read the article

• Connecting a print/file server with no wired access

  - by PeanutsMonkey

  We currently have a printer server which also serves as a file server. The server is located on premise however is not close to any wired access point i.e. a patch panel or point. The server also requires access to the Internet as it transmits files across. We have a wireless modem and a wireless router. I can run a cable between the server and wireless router. How can I have the wireless router communicate with the wireless modem? If the operating system of the server is concerned, it is running Windows Server 2003.

  Read the article

• Ubuntu 12.04 Network Manager: unable to save manual setting to set up a static ip

  - by Andy

  I am fairly familiar with setting up servers, and ubuntu is generally my flavor of choice, but I just installed 12.04 desktop and I am seeing some behavior in network manager that is really puzzling. The network connection works fine if I leave it set on dhcp, but I would like a static IP address for my new web server. When I go into network manager and edit the connection for the one and only NIC I can select MANUAL from the dropdown menu but as soon as I do the Save button becomes greyed out. Even after filling out all fields for the connection it is still grey and I am unable to save the static IP connection information. Any thoughts would be greatly appreciated. I'm hoping there is just some new setting that I am unaware of.... On another note, if I stop the network manager and go edit the interfaces file (and the appropriate hosts/routes/dns files), I do get a static ip address assigned and I can contact my server from the outside, however, the server cannot find the internet. Can't ping even its own ip... I can ping the loopback interface though. I'm really confused on this one. Hoping someone can offer some help.

  Read the article

• Is it safe to use a single switch for multiple subnets?

  - by George Bailey

  For a moment, forget about whether the following is typical or easy to explain, is it safe and sound? Internet | ISP supplied router x.x.x.1 (public subnet) | switch-------------------------------------+ | (public subnet) | (public subnet) BVI router (switch with an access list) NAT router | (public subnet) | (private subnet 192.168.50.1) +--------------------------------switch----+ (both subnets) | | computer with IP 192.168.50.2 ------+ +----computer with IP x.x.x.2 I don't plan to implement this setup, but I am curious about it. The 50.2 computer may send a packet to the x.2 computer, but it will use 50.1 as the router, since 50.2 knows that the subnet is different. Would this result in the packet being received twice by the x.2 machine, first directly through the switch, second by way of the two routers? Do you see any problems with this aside from how confusing it is, and that it would put one switch doing the work of two subnets?

  Read the article

• Batch Convert .mkv to .mp4 with VLC

  - by IamHere

  i want to batch convert all .mkv file in a folder into .mp4 with vlc. it should use the original video-/audio-stream and if possible the .ass subtitle of the .mkv. so its not really a convert, its more changing the container. (my player cant read the mkv) if i do this conversion by hand (manually) it works, but i have a lot of mkv to convert, so it would take a lot of time. i have searched the internet for a batch file to do this and i found a few and tried to modify them to my wish, but all attempts i tried just created a .mp4 file that doesn't contain the audio-stream and the video-stream also cannot be rendered by all my mediaplayers on the pc. so i would be very thankful, if you could tell me how the batch have to look like, so it works with original video-/audio-stream (maybe .ass subtitle)

  Read the article

• Very slow loading pages with router

  - by user984621

  I bought new router - this one: http://www.tp-link.com/en/products/details/?model=TL-WR841ND and the problem is, that the loading pages is so slow, even sometimes the pages aren't loaded at all. Is the same, when I have on the Mac OS or Windows. Below are the informations from the router-admin section: LAN IP Address: 192.168.2.1 Subnet Mask: 255.255.255.0 WAN IP Address: 192.168.1.100 Dynamic IP Subnet Mask: 255.255.255.0 Default Gateway: 192.168.1.254 DNS Server: 89.203.178.2 , 10.14.2.1 How can I fix this problem? Is almost impossible to use the internet this way.

  Read the article

• OS X server VPN local ip

  - by gbrandt

  Hi all, I have 10.6.2 server on the internet. I want to vpn into it to get access. I start VPN and it gives me an address in the range I have set 192.168.2.100-192.168.2.105. However the server itself does not have a local ip of 192.168.2.x so I cannot ping it or ssh into it or anything. The machine VPNing gets an ifconfig entry that looks like this: ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1280 inet 192.168.2.100 --> 70.72.xxx.xxx netmask 0xffffff00 Where I think it should get: ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1280 inet 192.168.2.100 --> 192.168.2.1 netmask 0xffffff00 I can't find anywhere to set the local vpn IP address. And I can't find a pptpd.conf file either. Any help is appreciated.

  Read the article

• 'Slow down' A DHCP server on purpose.

  - by Ced

  As the title implies, May look like a silly question, But what i'm trying to do, Is to have 2 DHCP servers in one network. One only leases IPs to Bootp clients (And if the client re-requests immediately after leases again) And one DHCP server, which is builtin with my PFsense router, that leases the non-bootp clients so they can access the internet and other network resources. I know by chance that PFsense uses ISC-DHCPd. Maybe they have a delay option? All i need to do to make sure the bootp/PXE boot clients get the proper address, is slow down the DHCP server in the PFsense box. Question is how. Anyone ideas? Thanks in advance

  Read the article

• What "file system" is supported by Windows and Linux?

  - by Skiroid

  I'm setting up a media centre for my living room so that I'm able to watch downloaded films and TV shows on the big screen. The media centre is an old small computer which will have XBMCbuntu 12 installed on it. Right now, the media centre has a 300 GB HDD partitioned into two: 1) Ext4 50 GB (where I'll install the OS) 2) swap 6 GB (swap area) I'm wanting a third partition which I can store all my media on to. This partition will fill the rest of my HDD. Although, I'm stuck on which file system I should set it to. I need the file system to be fully compatible with Windows as I'm going to be removing the HDD from the media centre and plugging it into my main PC, running Windows 8, to transfer the media onto it. I can't transfer over Wi-Fi as the media centre won't be connected to the Internet. My options are: Ext4 journaling, Ext3 journaling, Ext2 journaling, ReiserFS journaling, btrfs journaling, JFS journaling, XFS journaling, FAT16 and FAT32. I know that FAT32 is compatible with Windows but it can only hold files that are 4 GB or less and my films are well over 4 GB. Some more than 10 GB. Is there a file system I can use which is supported by Linux and pops up under Computer in Windows?

  Read the article

• Dual Boot Win8 and Win7 - Win 7 fails while booting

  - by bjan

  Below are my dual boot settings. Both are on different partitions, default is Windows 8. Both were working fine. There are multiple users of this machine, few run 8 while few 7. All 7's users are novice and they use Internet only. I frequently update Windows 8 but not 7. Few weeks ago, Win 7 stopped booting. Machine gets restarted while booting with 7(Windows 7 start up glowing-Win-logo-screen does not appear) and the 8's loader reappears. Win 7's partition still exists and contains Windows folder What steps should i take to check the problem?

  Read the article

• Windows Server 2008 constantly spamming external IP's on outbound TCP port 445

  - by RSXAdmin

  Hi Server Fault, I have a Windows Server 2008 box running as a Domain Controller. I have noticed in my Cisco ASA firewall logs that this box is continuously sending out (like a thousand requests a second) requests on TCP port 445 to external hosts. I have made an effort to deny this outbound traffic from getting on the internet (using the ASA), however I would like these requests to stop from even occurring at all. I have tried disabling TCP/IP over NetBIOS. I have even turned on Windows Advanced Firewall on the box itself to block outbound 445 but the ASA still detects this particular traffic hitting it. I have other DC's and similar type boxes which are not behaving the same way as this box. Is this normal? Is there a way to stop this spamming? Have I been infected? Thank you universe.

  Read the article

• Pointcast Alternatives?

  - by kellyllek

  I used to love Pointcast in the early days of the internet; it was a screensaver that, like RSS feeds, brought in all your favorite sources with news articles and stock quotes along with various other info and turned it into a visually interesting screensaver. It was before broadband though and I heard so many work places had to ban it that the company eventually folded. But I wondered if there are any modern day equivalents? I certainly have feed readers and some awesome desktop gadgets that bring in various things like news and weather, and I don't want a whole screensaver like pointcast. But I wondered if anyone out there had other suggestions worth taking a look at; making some kind of feed display of interest, or some other way to turn favorite content into more animated desktop background, etc...

  Read the article

< Previous Page | 722 723 724 725 726 727 728 729 730 731 732 733  | Next Page >