Search Results

Search found 12605 results on 505 pages for 'angular ui router'.

Page 73/505 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

  • What decent small-office level routers are there

    - by Glenn Slaven
    So let's say I have a network of less than 20 computers including a server that needs to be accessed externally. What router/firewall solutions would you recommend? It can be either hardware or software and would need to be able to do NAT Firewall DMZ Native VPN if possible Some form of network bandwidth monitoring Update: I've accepted the answer I liked but this question probably doesn't have a definitive answer, it would depend on your requirements. Please leave more suggestions with an explanation as to why it works well in your situation.

    Read the article

  • Ubuntu box static routing problem

    - by Rafael
    Hello, I'm trying to configure a ubuntu server to be a router. This is my interface configuration (eth2 connects to my WAN, eth0 to my LAN): auto eth2 iface eth2 inet static address 192.168.0.249 netmask 255.255.255.0 gateway 192.168.0.1 broadcast 192.168.0.255 auto eth0 iface eth0 inet static address 192.168.100.1 netmask 255.255.255.0 This is the router information: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth2 And this is dhcp configuration: subnet 192.168.100.0 netmask 255.255.255.0 { range 192.168.100.101 192.168.100.254; option domain-name-servers 201.70.86.133; option routers 192.168.100.1; authoritative; } I'm then connecting a mac os x by cable on eth0. This is en0 interface configuration: en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether 00:26:bb:5d:82:b0 inet6 fe80::226:bbff:fe5d:82b0%en0 prefixlen 64 scopeid 0x4 inet 192.168.100.101 netmask 0xffffff00 broadcast 192.168.100.255 media: autoselect (100baseTX <full-duplex>) status: active And this is the routing table: Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.100.1 UGSc 139 32 en0 10.37.129/24 link#8 UC 2 0 vnic1 10.37.129.2 0:1c:42:0:0:9 UHLWI 0 839 lo0 10.37.129.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 vnic1 10.211.55/24 link#7 UC 2 0 vnic0 10.211.55.2 0:1c:42:0:0:8 UHLWI 0 840 lo0 10.211.55.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 vnic0 127 127.0.0.1 UCS 0 0 lo0 127.0.0.1 127.0.0.1 UH 3 507924 lo0 169.254 link#4 UCS 0 0 en0 172.16.42/24 link#10 UC 2 0 vmnet8 172.16.42.1 0:50:56:c0:0:8 UHLWI 0 839 lo0 172.16.42.255 link#10 UHLWbI 1 24 vmnet8 192.168.100 link#4 UC 2 0 en0 192.168.100.1 0:e0:7c:7e:f:99 UHLWI 139 0 en0 777 192.168.100.101 127.0.0.1 UHS 0 0 lo0 192.168.100.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 en0 192.168.116 link#9 UC 2 0 vmnet1 192.168.116.1 0:50:56:c0:0:1 UHLWI 0 839 lo0 192.168.116.255 ff:ff:ff:ff:ff:ff UHLWbI 0 4 vmnet1 When I ping 192.168.100.1, it works. When I ping 192.168.0.249, it also works. However, when I try to ping 192.168.0.1 it does not. Does anyone has any way to solve this? Is there a way to debug it? Thanks,

    Read the article

  • System for public internet access

    - by Pydev UA
    I'm looking for solution for a public wifi spot.. I want that all people who connect to our wifi network should be redirected to special website(after they open any internet page) where they should reed and agree with our terms of services(by clicking a button). After that they can open any internet page. I have a router and a linux box with site(with agreement page ready), so I'm looking for some software/or hardware solution for this, preferable open-source.

    Read the article

  • IP Address Alias

    - by DanSpd
    Hello, I have a computer behind router with IP 192.168.0.166. I would like to know if it possible to mask real WAN IP to it. So in the end it would be visible as WAN IP but actually not.

    Read the article

  • Malicious program changing my DNSs

    - by julio.alegria
    Some weeks ago I started having problems with my internet connection, it was extremely slow and suddently some websites (specifically gmail, facebook, youtube and twitter) started failing to connect, while the rest connect normally. Some days after, those same websites started showing me a message in portuguese: "Nova atualização disponível" whenever I tried to connect and a .exe file started downloading ("internet_update.exe" or something like that). That's when I freaked out! It was definitely a virus or something like that, but it was really weird because I never had a problem like that (I run Linux). So I turned on my old PC (running Windows XP) and it turned out it had the same problem! the same message was showed whenever I tried to connect one of those specific websites, while the rest loaded without problems. Even in my Android smarthphone the same message was showed. So it was obvious that the problem was not in a particular machine but in the router itself. So I started googling and I found some information, unfortunately I only found some in spanish, so I will make you a short summary: It is a new banking trojan developed specifically to infect and collect information from Brasilian banks. Apparently now it has expanded to Argentina and Peru. So how does it work? It spreads through social networks (videos, links, ...) and then it "takes control" of your internet connection by changing the values of your DNSs. More specifically, it changes the Primary DNS to one of this IPs: 108.170.13.38, 66.7.216.122 or 63.143.43.154 and the Secondary DNS to 8.8.8.8, this secondary DNS is actually the Google Public DNS, and it is configured this way so that your internet connection continue working properly and the user does not notice anything. The important part here is that because no download or install has been made in your machine, no antivirus will notice any change. After your DNSs have been changed, the trojan controls every single website you connect to and this way they steal your bank information. So after reading about this I accesed to my router and I restored my Primary and Secondary DNSs to their proper values, but one day after I had the same problem again. This is actually a 50% warning post - 50% help me! post. So, here comes the question: Is there any possible way to prevent my DNSs of being changed?

    Read the article

  • Which linux-based firewall?

    - by Atlas
    We are looking to replace our current aging firewall/router with a new one. We would prefer it to be free/opensource if possible. Our minimum requirements would be: 1) Site-to-site VPN 2) Web URL/IP filtering 3) 2 WAN connections with load-balancing 4) Easy-to-use web inferface Any suggestions? and why you chose yours.

    Read the article

  • Bridging wlan0 to eth0

    - by user46127
    On arch Linux, I would like to mainly have eth0 (connected to bridged router) share the connection recieved from wlan0, Ive read tutorials but I'm not command sabby as other users are and don't completely understand. I would appreciate some help! Ty!

    Read the article

  • Comcast SMC Port Forwarding Issue

    - by Zach Fedora
    I have a Comcast SMCD3G modem/router and I've been having issues getting the port to forward - When I check an online "open-port-checker" it says the port is forwarded/they can see the port on my IP. (1 Static IP is assigned to the modem) But when I try to access port 80 for example on a browser, it times out. Also when I try to remote desktop to the server (Windows Server 2008 R2) it doesn't work, yet canyouseeme.org says it is open. Any ideas as to what the problem could be?

    Read the article

  • linksys WRT350N dd-wrt: how can i give upload priority to slingbox ?

    - by ufk
    Hi. i have the router WRT350N by Linksys I've installed dd-wrt v2.4 sp1 on it how can i configure it to give upload priority to slingbox ? The Slingbox is a TV streaming device that enables users to remotely view their home's cable. it seems that slingbox streams to amazon ec2 servers and from there to the client so i can't really give priority based on ip-address.

    Read the article

  • juniper j2300 console connection?

    - by Aceth
    I've been given a Juniper Networks J2300 router, but I've never used a juniper device before and no idea where to begin on how to connect to the console of the device. I have a serial to RJ45 cable but not sure on how to connect to the device. Do I use specific software or just use something like minicom (linux hyperterminal alternative)? I've had a look on the juniper website and couldn't find anything :( Any help would be truly appreciated, cheers

    Read the article

  • Using dynamic dns updater as Windows service

    - by Sami-L
    Currently I am using a dynamic dns updater software on Windows, but to keep it updating I have not to close it, also the software is not able to run at backgoud, I searched on google but the answer became complicated since there are many details to pay attention to, free, not free, installed on machine, configured on router, trusted, not trusted ... So please help me find a trusted free dns updater for Windows which can run as service, and maybe which can send email when update fails.

    Read the article

  • Sending a UDP message to a computer inside a network

    - by Dan
    Say I have the ip and mac address of a computer inside a network and I wish to send him a UDP message. By initializing the mac and ip addresses of the sent message to the given, when the network router recives the message he should pass it to the computer with the same mac address...right? Im asking becuase a program I write dosent seem to handle this limitation. it works great when its on the same network, but otherwise ...nada. Thanks

    Read the article

  • Are there any routers supporting client-side VPN?

    - by Andreas Hagen
    What I'm asking for is basically what the title says. I need a router that can forward all the data-traffic it receives through a VPN tunnel. Have Google'd a little but I can't seam to find a topic which the links to potential products still are active. The parameters to the specific VPN it is going to be used with is as follows: Sorry it is in Norwegian, but you should be able recognize the relevant parameters like encryption and such.

    Read the article

  • How can I make my livebox route to my external IP address for a computer in the DMZ?

    - by Noli
    I have a sagem livebox 2 (Fiber optic model), and have placed my computer in a DMZ. People from outside of my network can access my comp fine via its external dyndns.org address, yet when I try to call the public dyndns.org address from inside my network, I get redirected to the internal admin site on the router. How can I make it so that I can see my comp from the public address like everyone else? What kinds of questions should I be asking or looking into? Thanks

    Read the article

  • Recomended home ADSL wireless routers

    - by beakersoft
    I'm going to buy a new ADSL wireles broadband router, but i'm not sure what might be a good one. I want it to have some form of QOS on it, and SNMP support so i can see my port usage over MRGT. I've looked at various models but they all seem to have conflicting reviews, i am looking at something along the lines of the Dlink DSL-2740R but any suggestions would be much apreciated

    Read the article

  • cannot connect via http but can via ssh in Windows 7

    - by Tim
    Hi, I have a strange problem in my Windows 7. Sometimes web browsers (ie firefox and chrome) works sometimes don't. But ssh is always working. What could be the reason and how to fix it? My router is Linksys WRT54GL. Web browsing via firefox in my Ubuntu is okay. Thanks and regards!

    Read the article

  • Local IP address same as Google's external

    - by GRIGORE-TURBODISEL
    I'm exampling Google's IPs, but you get the idea. What happens if somebody configures a router's LAN address pool to range from 62.231.75.2 to 62.231.75.255, then his computer's IP address to 62.231.75.232 and someone else on the network tries to access Google? Or better off, is there any case in which someone in that network can, by merely attempting to access Google, accidentally bump into another computer on the network?

    Read the article

  • Zyxel P-320W: How to connect to my web server using public IP

    - by hvtuananh
    My company's router is Zyxel P-320W and I have a public static IP. I registered a few domains name and point to this IP address. I already setup Virtual Hosts and configured port-forwarding to my internal server and it works well. I can connect to all domains from outside The problem is I cannot connect to my domains from inside One workaround way is modify hosts file to add internal IP for those domains, but my company have many computers and I don't want to setup all PC manually

    Read the article

  • Wifi randomly drops on Windows 8 laptop

    - by JosiahS
    First of all, I did a lot of research on this problem, and I wasn't able to come to any helpful conclusion. I've finally decided that I need advice from those who might know where to look. So don't let me down. :P I used to have an older Windows 7 laptop, which worked great for basic office and web browsing. However, I wanted something that would play actual modern games. So I recently bought a Sager NP8235 with the Intel Wireless-AC 7260 wifi card, and installed Windows 8 Pro on it. And ever since, I've been having problems with the wifi. Generally, what happens is if I leave the laptop on but inactive for an extended amount of time (I've estimated it around an hour to two), the wifi will start dropping randomly. If I happened to have a download going at the time, it usually causes the download to fail. Or, if I put the laptop to sleep overnight, the next morning I usually have to restart the computer because the wifi device apparently stops working (it literally won't turn on). Also, and most frustrating, whenever I'm on a video chat (like Skype), after about ten minutes, the connection will start lagging like crazy, until it forces Skype to end the call. After that, I usually have to disable and reenable the wifi to get it working again. I know it isn't our internet, because all the other computers in our house (~8) don't have any issues. Even the old Windows 7 laptop (connected also over wifi) works just fine, scoring the normal ~3Mbps average on speedtest.net (yes, I know our internet is slow, we live out in the country). Additionally, when I connect the Sager directly to the router via ethernet, the internet instantly starts working just great. Like I said, I've done a lot of googling to figure out what's going on, and I haven't been able to find anything that worked for me. Is it Windows 8 conflicting with the Wifi drivers? As of this writing, I have the Intel drivers v16.1.5.2 installed (without the extra Intel software). Or is it our router? It's a TP-Link TL-WR841ND, set to the default settings. The Sager is currently being assigned to a static IP, if that makes any difference. And yet, the old windows 7 laptop has a much more stable connection than the Sager. Anyone have any ideas? At this point, I'd appreciate even knowing what the problem is.

    Read the article

  • need direction with assigning 2 ip addresses from my isp for gaming and web hosting

    - by user269451
    Hello and thank you for the help in advance. I have a Windows server 2003 that I want to use to host my companies website and a game server for MineCraft. I have a few weblinks bookmarked in regards to setting up the web and game server but no idea what I do with the two static ip's. Do I assign each network adapter the static ip's or do they go on the router? Any help and direction is greatly appreciated.

    Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >