Search Results

Search found 4450 results on 178 pages for 'bashar kernel'.

Page 73/178 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

  • GPU hung when switching graphic card

    - by Lie Ryan
    I have a laptop (Dell Inspiron N4110) with a switchable graphic. $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Whistler [AMD Radeon HD 6600M Series] (rev ff) Normally, my laptop starts with both graphic cards enabled, which caused the laptop to turn very hot and the fan to become very noisy. I have been using a small script to disable the Radeon card. For some time, I'm quite happy with this arrangement. However, I have been having some issues with the Intel card (IGD), the Intel card often randomly hang when running OpenGL apps; and so I want to give the Radeon card (DIS) another chance. I have never been able to switch to the Radeon card, but recently, I found out that if I do a "delayed switching" (DDIS): # echo "DDIS" > /sys/kernel/debug/vgaswitcheroo/switch root@lieryan-dell-ubuntu:/sys/kernel/debug/vgaswitcheroo# cat switch 0:IGD:+:Pwr:0000:00:02.0 1:DIS: :Pwr:0000:01:00.0 then I logoff (i.e. to restart X), the screen switch to pseudo-tty and then it stuck there freezing. At this situation, mouse and keyboard stops working so I can't switch to another ptty. I tried ssh-ing from another computer to salvage logs (dmesg at that point) and whatnot; I found out that when freezing, the active graphic card is the AMD card: -- this is from ssh -- # cat switch 0:IGD: :Off:0000:00:02.0 1:DIS:+:Pwr:0000:01:00.0 but the GPU is apparently hung, looking at dmesg gives: ... [ 1411.649974] vga_switcheroo: client 0 refused switch [ 1411.649985] vga_switcheroo: setting delayed switch to client 1 [ 1423.911759] vga_switcheroo: processing delayed switch to 1 [ 1424.006564] fbcon: Remapping primary device, fb1, to tty 1-63 [ 1424.006799] i915: switched off [ 1424.840351] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1425.718088] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1426.622377] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1427.355683] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1428.193549] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id ... the invalid framebuffer id error is repeated for many times over ... I were able to successfully recover by switching back to the Intel card and restarting X from ssh; indicating that only the Radeon card has problems switching. System info: $ uname -a Linux lieryan-dell-ubuntu 3.0.0-14-generic #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric The laptop also do not have the option to set graphic card at BIOS and the proprietary driver, fglrx, also have never worked; when I installed it through jockey ("Additional Drivers"), glxinfo showed that it still being rendered by Mesa, the /sys/kernel/debug/vgaswitcheroo directory has gone missing, and the driver crashes with a traceback if I use xorg.conf to tell X to use fglrx. Anyone had any idea if it is possible to use this AMD card either with the radeon or the fglrx driver? logs: dmesg

    Read the article

  • Netgear WNA1100 stopped working

    - by NOLFXceptMe
    I'm facing a rather strange issue with the USB wireless adapter WNA1100. I was able to connect to wireless using this yesterday. However, today am not. lsmod shows ath9k_htc, ath9k_common, ath9k_hw, ath and ndiswrapper. I'm not sure if this is relevant to the above problem, but between yesterday and today, the only change was an upgrade to Ubuntu 2.6.38 kernel, which caused the NVIDIA driver to break (I have a 7300GT), so I had to ignore that kernel, reboot into 2.6.35, and rebuild NVIDIA module from NVIDIA-Installer-270.run. Help?

    Read the article

  • Correcting color-shifted mirrored i915 driver in 12.04?

    - by Will Martin
    I was called in to fix a friend's malfunctioning HP Pavilion. She's not sure exactly which model, but the sticker on the bottom says "G60". The problem was a failed upgrade to 12.04. I was able to mostly repair it with sudo apt-get -f install, which ran setup and configuration for several hundred packages. The biggest problem at the moment is Xorg. The login screen (lightdm) loads normally but at a reduced resolution (1024x768 instead of 1366x768). But once you log in, it looks like this: Observe that the colors of the dock on the left and the bar at the top are normal. But the background is filled with bizarro color-skewed ghost images of the desktop. In all cases, the actual contents of any programs you run is a totally illegible mess, except that the bar at the top of any program windows looks and acts normally. And the ghost images are interactive! For example, if you click the icon in the top right corner to get the "shut down" menu, the same menu will appear in the ghost images below. Starting a terminal will start a terminal window in both the real desktop and the ghost images, and moving it around updates both the real and ghost desktops. I suspect Xorg is using some kind of wrong driver and/or parameter for the graphics hardware. Here is the graphics-relevant portion of the lspci -v output: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 09) Subsystem: Hewlett-Packard Company Device 360b Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0a <?> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device 360b Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at d0000000 (64-bit, non-prefetchable) [size=4M] Memory at c0000000 (64-bit, prefetchable) [size=256M] I/O ports at 5110 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [d0] Power Management version 3 Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) Subsystem: Hewlett-Packard Company Device 360b Flags: bus master, fast devsel, latency 0 Memory at d2500000 (64-bit, non-prefetchable) [size=1M] Capabilities: [d0] Power Management version 3 I'm not sure what to check next. I would ordinarily check xorg.conf to see what it says, but that apparently doesn't exist any more, and my googling has not yielded any useful techniques for getting Xorg to tell me what settings it decided to use. The weird part is that it works fine on the login screen. It's only when you actually log in as a user that the display gets screwed up. Suggestions?

    Read the article

  • Wi-fi interface fails to authenticate on secured networks

    - by Eduardo Bezerra
    the problem is that I can't connect to wireless networks that have security enabled. I can connect fine to the unsecured network of my university, but not to the secured one in the same building. Also, it fails to connect to my home wireless router, which uses wpa2 encryption. Any ideas? I have a Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01), with pci id [14e4:4353], running Ubuntu 12.10 on a macbook pro 6,2. I'm using bcmwl-kernel-source package with kernel module wl to enable my wi-fi device.

    Read the article

  • Debian Stable vs Ubuntu LTS for Server?

    - by Kevin
    Quick question: Which is a better platform for a professional use server? Debian Stable or Ubuntu LTS? The third party software we plan to use, works on both. Which one is better on it own merits? Take into account things like the kernel (Ubuntu for example has its own custom kernel for servers), and other Ubuntu specific customizations. I keep switching back and forth, and I need to decide so I can recommend one or the other to a client. Right now, I think I am going to choose Debian Stable. Recently, I have had Ubuntu Server Edition 10.04.1 have a few strange issues... I have Ubuntu setup to do automatic updates via a simple script, and every few months or so, libapache2-mod-php5 gets removed because of conflicting packages... Thereby causing me to loose the php function of the web server. Debian Stable has not done anything like this.

    Read the article

  • Oracle is Sponsoring LinuxCon Europe 2012

    - by Zeynep Koch
    Architecture is amazing in Barcelona but you will also be impressed with Oracle Linux sessions in LinuxCon Europe as well.  Oracle is one of the key sponsors in LinuxCon Europe and we have great sessions to show you why Oracle Linux is best for your "IT architecture"! We also have a booth where you can pick up latest Oracle Linux and Oracle VM DVD Kit and Virtualization for Dummies booklet. Don't forget to visit us at technology showcase Booth #19. Oracle Sessions at LinuxCon Europe 2012:  1. OCFS2: Status and Overview - Lenz Grimmer, Oracle Wednesday November 7, 2012 10:40am - 11:25am Venue: Diamant OCFS2, Oracle's general-purpose shared-disk cluster file system for Linux has come a long way since its development started in 2003. Distributed under the GPL and part of the mainline Linux Kernel, it is also included in Oracle Linux and plays a vital role in products like Oracle VM, Oracle RAC or E-Business Suite. This presentation will provide a general technical overview as well as an update on the latest developments. Attendees will learn about the features and improvements that set OCFS2 apart from other Linux-based cluster file systems, including: Heartbeat implementation: global vs. local heartbeats Storage optimizations: Extent-based Allocations, Hole punching, Reflinks 2. Status of Linux Tracing - Elena Zannoni, Oracle Wednesday November 7, 2012 11:35am - 12:20am Venue: Diamant There have been many developments recently in the Linux tracing area. The tracing infrastructure in the kernel is getting more robust, with  the recent introduction of uprobes to allow the implementation of user  space tracing, and new features of perf. There are many tracing tools to choose from, including the newest kid on the block, DTrace for Linux.  This talk will take the audience through the main tracing facilities  available today whether more tightly integrated with the kernel code, or maintained stand alone. 3. MySQL Security Model and Pluggable Authentication - Kristofer Pettersson, Oracle Wednesday November 7, 2012 1:50pm - 2:35pm Venue: Diamant With an increasing security awareness among web and cloud developers, knowing how to secure your database from unauthorized or malicious access has become important. This talk explains the MySQL security model, pluggable authentication, new auditing features and rounds off with some pointers on how to securely integrate your database into your Linux web stack. We look forward to seeing you in Barcelona, Spain on November 5-9, 2012. Register today 

    Read the article

  • I dont know how to run e2fsck or fsck and what are their differences

    - by Salvador
    My Kern.log file advise me to run e2fsck. Aug 30 14:10:11 ubuntu kernel: [ 122.378292] EXT4-fs (sda11): warning: maximal mount count reached, running e2fsck is recommended Aug 30 14:10:11 ubuntu kernel: [ 122.387488] EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null) /dev/sda11 is not mounted within my current OS (Ubuntu 10.04) I have known that e2fsck is a dangerous command when running against the root partition which is at the same hard disk as sda11. I would trust in this solution better than others: Can I run fsck or e2fsck when Linux file system is mounted?

    Read the article

  • Can't get Broadcom 43142 drivers to work after installation on 5420 Inspiron

    - by beckett
    I'm a complete newbie to ubuntu, I've already installed and reinstalled the Broadcom driver required done a numerous amount of steps on terminal but I can't seem to get wireless working. However, my wired connection seems to work just fine. also I have tried to follow the instructions but get stuck at step number 2 when i get told "No package dpkg is available": 1) Download the file from the link 2) sudo yum install dpkg 3) mkdir BCM43142 4) dpkg-deb -x Downloads/wireless-bcm43142-dkms-6.20.55.19_amd64.deb BCM43142 5) cd BCM43142/usr/src/wireless-bcm43142-oneiric-dkms-6.20.55.19~bdcom0602.0400.1000.0400/src/wl/sys 6) sudo yum install kernel-devel kernel-headers 7) vi wl_linux.c 8) around line 43, remove the line include 9) save the file (:wq) 10) cd ../../.. 11) make Things should work, and you'll have a file called "wl.ko" in the current directory. 12) sudo yum remove broadcom-wl 13) sudo mkdir -p /lib/modules/3.5.2-3.fc17.x86_64/extra/wl 14) sudo cp wl.ko /lib/modules/3.5.2-3.fc17.x86_64/extra/wl 15) sudo depmod -a 16) sudo modprobe wl I really need help :/

    Read the article

  • Force ntfs volumes to be treated like any other by default

    - by soandos
    I have a 20 GB NTFS volume that I was planning on using for a variety of purposes, including being readable by windows with little effort. Unfortunately, for some reason, I cannot execute any files on the drive, even after following the answer here (I was able to mount the volume just fine, but the error persists). How can I fix this? Output from mount: /dev/sda1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/cgroup type tmpfs (rw) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) none on /sys/fs/pstore type pstore (rw) systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd) gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=daniel)

    Read the article

  • GLIBC_2.8 not found

    - by Thomas Nilsson
    As a newbie I seem to have messed up my upgrade leaving my system in a very unstable state. I attempted an upgrade from 8.04LTS which ended in an error about libc and kernel upgrades. I tried to upgrade the kernel but am now unsure if that worked, because when I retried my dist-upgrade there was a lot of errors about pre-dependencies and leaving packages un-configured. Now I have a system that answers almost every command with: /lib/libc.so.6: version `GLIBC_2.8' not found (required by /lib/libselinux.so.1) I probably should try a complete re-installation, but I'm investigating if there is any possibility of getting a working glibc so that I at least can have some commands working to ensure that my backups are recent etc. before doing the clean install. not even 'ls' works without saying "glibc_2.8 not found".

    Read the article

  • Ubuntu 12.04, can't find my home wifi network

    - by Anton
    I've tried several solutions I found on the web, but didn't manage to solve a problem. Since today my laptop won't find my WiFi network, but neighbours' networks are suggested. Another laptop with U12.04 does find one. What do I do? I've Dell Latitude-E4310, 02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01) Subsystem: Dell Inspiron M5010 / XPS 8300 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f2c00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: bcma, brcmsmac also NetworkManager Tool State: connected (global) - Device: eth1 ----------------------------------------------------------------- Type: 802.11 WiFi Driver: wl State: disconnected Default: no HW Address: 1C:65:9D:7A:45:5C Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Should I provide anything else? Many thanks in advance.

    Read the article

  • sound stopped working after upgrade to 11.10 on Tuesday 20th March

    - by Hugh Barney
    My sound card stopped working after a set of updates were installed 2 days ago. The sound card is detected, the volume is not muted and the speakers work, I can make the speakers hum if I touch the jack plug lead that normally plugs into the card. hugh@lindisfarne:~$ lspci -v | grep -A7 -i "audio" 07:01.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster Subsystem: Creative Labs SB0570 [SB Audigy SE] Flags: bus master, medium devsel, latency 32, IRQ 16 I/O ports at c000 [size=32] Capabilities: Kernel driver in use: CA0106 Kernel modules: snd-ca0106 I've tried reverting those upgraded packages that look like the could impact the kernal - but to no avail. alsamixer does not have anything muted, I've been though all the sound card debug/troubleshooting pages I can find. Kernal driver is attached. So whats gone pop ? I will boot from CD to check - but I am pretty sure this is a sw and not a hw problem.

    Read the article

  • Getting vga_switcheroo with ATI Mobility Radeon 5650 HD to work

    - by stevejb
    Hello! I have a new HP dv7 laptop with ATI Mobility Radeon HD 5650 graphics card, and also Intel graphics (switchable). I have done the following and want to understand what is going on with my graphics driver Resized windows 7 and did fresh install of 10.10 Booted into 10.10 and things seemed to be working okay Enabled ATI graphics, and was clearly working on the ATI rather than Intel GPU (desktop cube worked) Rebooted, got an error that modprobe could not load modules.dep, and also something about i915 symbols Rebooted into recovery mode, modified xorg.conf to remove the mention of fglrx Rebooted, and the errors show, but then x starts but clearly in intel graphics I would ideally like to be able to switch between the ATI and Intel graphics, a la vga_switcheroo. My first problem seems to be that the folder /sys/kernel/debug/vgaswitcheroo does not exist, hinting at some kind of kernel issue. What can I do to get this available? Thanks!

    Read the article

  • my probleme about "The installation or removal of a software package failed"

    - by tulipelle
    Recently, when I open Ubuntu software center, it ask me repair package Then I found this message . installArchives() failed: (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 569135 files and directories currently installed.) Unpacking linux-image-3.5.0-42-generic (from .../linux-image-3.5.0-42-generic_3.5.0-42.65~precise1_amd64.deb) ... Done. dpkg: error processing /var/cache/apt/archives/linux-image-3.5.0-42-generic_3.5.0-42.65~precise1_amd64.deb (--unpack): failed in write on buffer copy for backend dpkg-deb during `./boot/vmlinuz-3.5.0-42-generic': No space left on device No apport report written because the error message indicates a disk full error dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.5.0-42-generic /boot/vmlinuz-3.5.0-42-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.5.0-42-generic /boot/vmlinuz-3.5.0-42-generic Errors were encountered while processing: /var/cache/apt/archives/linux-image-3.5.0-42-generic_3.5.0-42.65~precise1_amd64.deb Error in function: dpkg: dependency problems prevent configuration of linux-image-generic-lts-quantal: linux-image-generic-lts-quantal depends on linux-image-3.5.0-42-generic; however: Package linux-image-3.5.0-42-generic is not installed. dpkg: error processing linux-image-generic-lts-quantal (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-generic-lts-quantal: linux-generic-lts-quantal depends on linux-image-generic-lts-quantal; however: Package linux-image-generic-lts-quantal is not configured yet. dpkg: error processing linux-generic-lts-quantal (--configure): dependency problems - leaving unconfigured

    Read the article

  • Periodic clicking sound from PC speaker

    - by John J. Camilleri
    After an update some months ago, my laptop has begun making a low, repeated clicking sound every few seconds. It is not being generated through the regular sound system, as altering the volume and even muting the sound does not make any difference. My regular audio works fine, by the way, so I am guessing this is some sort of PC speaker, since I cannot hear the click when I listen through regular headphones. Strangely, when I open the sound settings dialog the click magically disappears. I don't need to change any settings; if I simply leave the dialog open in the background then the problem disappears. Any ideas what this could be? I am running regular Ubuntu 12.04, and this is the output from lspci -v | grep -A7 -i "audio": 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Subsystem: Acer Incorporated [ALI] Device 0349 Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at 54200000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel

    Read the article

  • Black screen after upgrading from 13.04 to 13.10

    - by Harri
    Just upgraded from 13.04 to 13.10 and all I got was a black screen. The hardware I'm running is Asus Zenbook UX31A (Intel GPU). I do hear that the login screen drums do play, so the system does boot to login screen. When I try to boot using kernel 3.11.0-12 recovery mode, it tells me "initctl: event failed". Then if I go on an press ctrl+alt+f2, log in and command startx, it dies because "Fatal server error: no screens found". Here are some logs from /var/log/Xorg.0.log http://pastebin.com/ZQasUKJx Kernel 3.8.0-31 work ok, as did things before the upgrade.

    Read the article

  • Vmware installation over ubuntu sever 12.04 lts

    - by Sandeep
    How to install vmware workstation 7.1.6-744570.i386 on Ubuntu Server 12.04 lts. i installed it but error is coming . Vmware kernel module updater Unable to build kernel module. See log file /tmp/vmware-root/setup-8887.log for details. make[2]: * [/tmp/vmware-root/modules/vmmon-only/linux/driver.o] Error 1 make[1]: * [module/tmp/vmware-root/modules/vmmon-only] Error 2 make[1]: Leaving directory /usr/src/linux-headers-3.2.0-27-generic-pae' make: *** [vmmon.ko] Error 2 make: Leaving directory/tmp/vmware-root/modules/vmmon-only' please provide the solution for this

    Read the article

  • Unity Search Not Working

    - by greggory.hz
    When I attempt a search after hitting Super, the spinner spins, but no results come up once the spinning stops. I'm not sure what changed that caused this. I had a newer kernel installed, but I have since reverted back to the default kernel. I also followed this guide: http://www.webupd8.org/2011/04/how-to-reset-unity-launcher-icons-or.html Alt+F2 does not work. The packages unity-place-applications and unity-place-files are installed. But search still doesn't function correctly.

    Read the article

  • How can I determine which GPU card is running at PCI Express 2.0 x16 & which is using x8?

    - by M. Tibbits
    Is there a way to determine the speed of the PCI Express connection to a specific card? I have three cards plugged in: two Nvidia GTX 480's (one at x16 & and one at x8) one Nvidia GTX 460 running at x8 Is there some way, either by a function call in C or an option to lspci that I can determine the bus speed of the graphics cards? When I only use one of the cards for my CUDA program, I'd like to use the one which is running at x16. Thanks! Note: lspci -vvv dumps out For the two GTX 480s. I don't see any differences that pertain to bus speed. 03:00.0 VGA compatible controller: nVidia Corporation Device 06c0 (rev a3) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at b0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at bc000000 (64-bit, prefetchable) [size=64M] Region 5: I/O ports at df00 [disabled] [size=128] [virtual] Expansion ROM at b8000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb, nouveau 03:00.1 Audio device: nVidia Corporation Device 0be5 (rev a1) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 0: [virtual] Memory at d7ffc000 (32-bit, non-prefetchable) [disabled] [size=16K] Capabilities: <access denied> 04:00.0 VGA compatible controller: nVidia Corporation Device 06c0 (rev a3) Subsystem: eVga.com. Corp. Device 1480 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at cc000000 (64-bit, prefetchable) [size=64M] Region 5: I/O ports at cf00 [size=128] [virtual] Expansion ROM at c8000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb, nouveau 04:00.1 Audio device: nVidia Corporation Device 0be5 (rev a1) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 5 Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> And the only differences I see relate specifically to the memory mapping: myComputer:~> diff card1 card2 3c3 < Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- --- > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- 7,11c7,11 < Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M] < Region 1: Memory at b0000000 (64-bit, prefetchable) [size=128M] < Region 3: Memory at bc000000 (64-bit, prefetchable) [size=64M] < Region 5: I/O ports at df00 [disabled] [size=128] < [virtual] Expansion ROM at b8000000 [disabled] [size=512K] --- > Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M] > Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] > Region 3: Memory at cc000000 (64-bit, prefetchable) [size=64M] > Region 5: I/O ports at cf00 [size=128] > [virtual] Expansion ROM at c8000000 [disabled] [size=512K] 18c18 < Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- --- > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- 19a20 > Latency: 0, Cache Line Size: 64 bytes 21c22 < Region 0: [virtual] Memory at d7ffc000 (32-bit, non-prefetchable) [disabled] [size=16K] --- > Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=16K]

    Read the article

  • AHCI Hotswap in Lucid Server

    - by chong
    Does Lucid support hotswapping of AHCI devices? Is there anything more to it than simply unmounting all filesystems on the drive to be disconnected and plugging in the new disk? 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller (rev 02) is the controller I'm working with. BIOS is set to AHCI. I also tried simply unmounting and unplugging. That seemed to work fine. Plugging in a new drive locked up the system. AHCI kernel module is also loaded. I've also looked at the Raid WIKI on kernel.org which talks about hardware requirements for AHCI HotSwapping of disks. My drives and cables all appear to meet the criteria, but most of that info pertains to the electrical side (grounding, etc...).

    Read the article

  • Avast Antivirus Crashes

    - by user67966
    Well I have installed avast anti virus on Ubuntu 12.04. But after updating, it crashes! So I have made some tweaks like below: 1) I pressed press Ctrl+Alt+T and opened Terminal. When it opened, I ran the command below. sudo gedit /etc/init.d/rcS 2) typed my password and hit enter 3) when the text file opens add the line: sysctl -w kernel.shmmax=128000000 4) made sure the line you added is before: exec /etc/init.d/rc S 5) This is how it should look like: Code: #! /bin/sh # rcS # # Call all S??* scripts in /etc/rcS.d/ in numerical/alphabetical order # sysctl -w kernel.shmmax=128000000 exec /etc/init.d/rc S 6) save it 7) Reboot My question is. Did I do anything wrong. I mean as I have made some tweaks,will it lower the security of avast down like viruses do! Please if you are a programmer check this if it contains bug or harmful intentions...Thanks.

    Read the article

  • PL2303X driver for ubuntu

    - by kam
    I have 2 questions I hope someone is able to help me. I bought a usb/serial adapter based on PL2303X and not PL2303. 1- Do you know of any patches to make the PL2303X detectable and functional? 2- Assuming I got the patch, and before I apply it, I wanted to upgrade my kernel. I found this website http://www.unixmen.com/upgrade-your-kernel-the-safe-way-in-ubuntu-linuxmint/ to teach me to do so.. Is this a good procedure? and to what version you advise me to upgrade? Thanks.

    Read the article

  • Cannot sleep/standby in Ubuntu 12.04

    - by mstaessen
    Yesterday, I installed Ubuntu 12.04 Desktop i386 on my netbook (HP Mini 311c). I am unable to use the sleep mode. When I press the suspend button (or do sudo pm-suspend), the screen flickers but the computer does not power off. Even worse, the screen comes back up and I'm back where I left off. Hibernating does work (although it is not available in Power Management). I have to use pm-hibernate to make that work. I'm using the 3.2.0.20 kernel and Gnome 3.3.92 (Unity, especially compiz, is a resource hog). Before Ubuntu 12.04, I was using Mint Linux 12 with the 3.0 kernel and everything worked fine back then. Any help is much appreciated because this is driving me crazy.

    Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >