Search Results

Search found 2589 results on 104 pages for 'dell powerconnect'.

Page 73/104 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

• Windows data backups with alternating removable drives?

  - by luke

  0 vote down star I have a removable disk drive (RD1000 from Dell), and I am looking for backup software that will allow me to backup every night, and every morning switch to the alternate disk. There is only one directory structure to back up, what I want is two copies, one which I will take home with me every night, one which will be backing up every night, and when I get in in the morning, I will switch them. So for instance I have disk "a" and disk "b". On Monday night I want to go home with disk "a" and leave disk "b" in the drive, so that a scheduled back up will be written to it. On Tuesday morning I will come in and swap disks, and I will take "b" home that night, leaving "a" for the backup. And so on for the remainder of the week. FOSS software preferred, Freeware acceptable, paid software as a last-ditch effort. Oh, btw I'm stuck with Windows 2000 Thanks in advance.

  Read the article

• USB to HDMI using just a cable

  - by Nirmal

  I got a cable which has a USB point on one side and an HDMI point on the other side. I was under an impression that I could watch movies from my computer if I connect my computer to the TV using this cable. But looks like I was wrong. Does anyone know if such cable need some driver to make it work? Thanks for any input. (My computer is a Dell All-in-one PC which cannot take an extra graphic card. That's why I am trying my luck with such a cable.)

  Read the article

• Docking Station Disabling/Enabling Network Connection

  - by bryan_cook

  Whenever I dock my laptop onto my docking station, Windows disables my Wireless Network Connection and enables my Wired Network Connection. Whenever I undock my laptop, Windows disables my Wired Network Connection and enables my Wireless Network Connection. Is there a way to disable this feature? After Windows performs the automatic disabling/enabling, I run into errors when I try to disable the now-enabled connection, specifically "It is not possible to disable the connection at this time. This connection may be using one or more protocols that do not support Plug-and-Play, or it may have been initiated by another user or the system account." I'm assuming the latter portion of the error is true ... my network connections are being enabled/disabled under a system account. Regardless, I'd just like to disable the feature altogether. For reference, I'm working with Windows XP Professional on a Dell Latitude D630. Thanks in advance!

  Read the article

• Broadcom BCM5716 Hangs on CentOS 6 Boot

  - by someotherguy

  I have a fresh CentOS 6 installation on a Dell R310 server with a Broadcom BCM5716. The onboard NIC is causing the boot to hang for some reason. Welcome to CentOS Linux Starting udev: udev: starting version 147 Boardcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.23b (Feb 01, 2011) bnx2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 That's it... then it just hangs / freezes. If I disable the NIC via the BIOS settings, CentOS boots fine. I've downloaded and installed the latest driver from Broadcom's website. Any ideas?

  Read the article

• Windows Server 2003 Standby/Sleep Results in Cold Boot when Resuming

  - by Simon Chadwick

  I'm running Windows Server 2003 sp2 on a Dell Inspiron e1705. There has never been a problem going to standby/sleep mode (by closing the laptop lid, or from the Start menu), and then resuming later. Today I did a Windows Update to install the latest patches and fixes. I don't know if there is a correlation, but now when I resume from standby/sleep mode, the machine does a cold boot. The AC adapter is connected. The battery is 2 months old, and all its LEDs light up when pressing its test button. The Power Management shows it at "99% (charging)" all the time. There is nothing suspicious in any of the event logs. Any ideas?

  Read the article

• 802.11n Audio Interference

  - by colithium

  Symptoms My audio is riddled with pops/crackles/glitches. Sometimes I swear the glitches sound exactly like the facebook messenger sound (best comparison I can give). Cause Using DPC Latency Checker, it reports the latency to be an abysmal 17,500µs (0.0175s). The first thing I did was disable my 802.11n wireless adapter. This immediately dropped the latency to a nice 250µs. When I re-enabled the adapter, it jumped right back up. I'm 99% certain that this is the cause of my audio glitches. Solution What can I do about it besides using wired Ethernet or buying a whole new adapter? My adapter is a Dell Wireless 1505 Draft 802.11n WLAN Mini-Card. To be honest, I've had nothing but trouble with the 802.11n standard and am contemplating just going back to g.

  Read the article

• Windows OS's cannot boot on new internal harddrive

  - by Kothari

  I have installed a new internal 500GB hard drive into a Dell Inspiron N4030 and it appears that the installation was entirely successful. The BIOS recognizes the drive and shows the serial number of the hard drive. The problem is that I cannot boot any Windows OS. I have tried XP, Vista, Windows 7 and Windows 8. It displays only a black screen with a blinking cursor. Fedora boots successfully. My old hard drive crashed, but would atleast boot up these OS's before it died. Any help?

  Read the article

• How to use iSCSI inside HyperV VM?

  - by William

  I have 2 Dell R710 servers (intended to set up HyperV cluster) and a MD3000i SAN set up: Server1/Server2: NIC 1: connected to company LAN NIC 2: crossover to the other server's NIC 2 NIC 3: crossover to iSCSI port of SAN controller 1 NIC 4: crossover to iSCSI port of SAN controller 2 I have both servers setup as diskless servers with iSCSI boot from SAN without problem. But how can I access iSCSI from within the VM such that I can set up clustering inbetween the VMs? I can ping from the host to the SAN but found that NIC3/4 cannot be used for virtual network in HyperV? What am I doing wrong?

  Read the article

• Mutli-processor workstation as a workstation/server

  - by posdef

  I work in a research institute and a number of programs we use are computationally intensive (I actually wrote one of them). Right now we have one computer that is dedicated for one of these programs (with local accounts only, as in users physically sitting in front of that pc) and the other programs are run on individual workstations assigned to people. I have been looking around to common brands such as Dell and HP, for a some sort of a small/medium scale server, which can be used as a workhorse by sending tasks remotely. It appears as if there is nothing in between workstations with one 6-core processor and a bunch of extras (like fancy graphics etc) and rack mount servers with ridiculous amount of RAM and HDD expansion capabilities but still relatively little number of processors/cores. I wonder if what I am looking for is such a small niche product? Are there other solutions that I might not be aware of? Does anyone know of a multi proc- multi-core workstation/server that is still within the reasonable

  Read the article

• Slowdown after repeated hibernation in XP SP3

  - by John

  I have a Dell laptop w/dual core and 4 gigs of memory. Recently my machine has started to go off in never never land for 5 to 20 minutes at a time with a lot of hard drive churning. Eventually it comes back and everything operates properly. If I manage to have task manager up CPU usage shows no more then 3 to 5% during this process. I am on a corporate network and have very good virus protection in place. The problem seems to have increased in frequency since I let an update happen to IE8 and/or I started using hibernate more frequently. Any ideas or suggestions? TIA J

  Read the article

• Triple ghost animated cursor

  - by R G A

  Since installing the driver for Intuos 4 Graphics tablet, animated cursors display as a triple ghost cursor. I cannot find any reference to this problem elsewhere. System specifications: new Dell XPS, Windows 7, ATI Mobility Radeon HD 4670. Graphics tablet and graphics software are virtually useless since the cursor hotspot is nearly impossible to identify. All drivers and software are current. Any thoughts? Vendors deny any knowledge or responsibility. Removing the Intuos driver does not fix this.

  Read the article

• Changing Win 8.1 Pro Store App Installation Folder

  - by ChiliYago

  I have a Dell Venue 8 Pro tablet with Windows 8.1. The c:\ is very limited capacity at only 24GB. With the OS only on the c:\ I just have 8.6GB of free space. So I have added a 64gb SSD to the machine and want to install all my apps on it and not the C Drive. I know the apps get installed in c:\Program Files\WindowsApps folder so I have ROBOCOPY'd all the files to d:\Program Files\WindowsApps and created a symbolic link using mklink. It seems that new apps are install correctly now on d:\ however the existing apps fail to open. What is the Microsoft's solution to making this happen seamlessly?

  Read the article

• What's the downsides of Running Ubuntu 9.10 32bit on AMD64 Processor

  - by Omar Dolaimy

  Hi, I was thinking about installing Ubuntu 9.10 32bit on a DELL Inspiron 1501 with 64bit processor Laptop. Since It's was real pain to me to run Java Browser plugin, Flash Plugin, J2ME Toolkit, and many other tools. But It was 90% OK with me. This was Ubuntu 8.10 (a year ago), And now the Ubuntu 9.10 came and I'm thinking about installing the 32 bit on it and get rid of the pain. Is there a downside for that?? considering that the display card is not supported now so exclude this from your calculation, I will never play REAL games on it and I'm not a big fan of Compiz effects. I'm not here to ask about the performance (which is about 15%+ for the 64bit only), I just want compatibility!

  Read the article

• Windows Storage Server 2008 hangs at logon

  - by ErJab

  We have a Dell PowerVault NX-3000 server running Windows Server 2008. Every now and then, when I try to login, the server seems to hang at the Welcome screen after I type in the password. However, all other services on the server are running fine - users are able to print off the print server and access their files. It just won't let me login. Any idea why this is happening? P.S.: I can't look at the server logs, because it won't let me login in the first place. Remote administration is also disabled on the server, so I can't use Remote Administration tools to look at the logs.

  Read the article

• Old PCI Video Card and PCI-Express ATI Radeon HD 4200 Pro Living Together

  - by Adam Driscoll

  I have two video cards installed in a Dell Optiplex 745. The PCI card is from 2001 and I was hoping to be able to install it, allowing me to have 3 monitors. The Radeon is already running two itself. The problem is that when I boot the box with default BIOS settings the PCI card displays video to the single display but not the other two. In device manager I can see that both video cards are visible with drivers loaded correctly but underneath monitors I only have a single Generic PnP monitor from the VGA connection to the PCI card. If I switch the BIOS setting to force PCI-E I get the Radeon to display to the two other monitors. When I check device manager with this configuration I see that the PCI card displays an error saying the driver could not be started. Any ideas?

  Read the article

• Is mismatched firmware on drives in a raid-6 a bad thing?

  - by bwerks

  Hi all, I recently expanded a raid-1 to a raid-6 with six drives. I ordered all four of the new drives from the same place, and all of them were advertised to be the same drives as the original two--Seagate 15krpm 146gb. However, when I was looking at the drives in the perc6/i utility, one of them appeared to be an earlier firmware version; it had S515, compared to the other five drives with S527. Sure enough, after inspecting the drive itself, the label advertised the earlier firmware version. Running Dell's SAS firmware upgrade utility should have in theory moved them all up to S52A, but when I ran it it moved the S527 drives up to S52A, and left the S515 drive untouched. Is this something to be worried about? If it's something that should be corrected, is there a way to target a particular drive for upgrade since the firmware utility didn't seem to do it by itself?

  Read the article

• 3 or 4 monitors with Nvidia and Ubuntu

  - by Jason

  I saw that you are (were?) running 4 monitors with Ubuntu 8.10 and two Nvidia cards (http://stackoverflow.com/questions/27113/how-to-use-3-monitors). I was curious if you were doing this with Xinerama, a hacked up TwinView config, or multiple X screens, or some other method? Does it work with compiz? I intend to run my Dell 30" in the middle with two 1280x1024 on the sides and continue to use one X screen, and run compiz, on Ubuntu 9.04. Currently, I am using 2 monitors with twinview and compiz, which runs fantastic. I just can't get the third monitor running (unless I enable it in its own X screen, and then enable Xinerama to enable windows to be dragged as if all one X screen, but this breaks compiz, and I don't care much for having separate X screen). I am very interested in knowing how you set up 4 monitors with 2 GPU's. Thanks!

  Read the article

• Matte or non-widescreen laptop? Do they exist?

  - by Alan Harris-Reid

  Does anyone know of any matte-screen laptops being sold now (15.6 or 17") in the UK? All I can find is the Dell Vostro 3500/3700 range, but there is a premium of around £200 over the price of their Inspiron range (for the 17" model), and I find it hard justifying the extra cost just to have a matte screen. I do not like glossy screens, but it seems the laptop industry has gone the way of "glossy is better - let's get rid of matte". I have read and heard from other developers that as long as there are no strong light sources to reflect off the screen, one can soon get used to a glossy screen, but I am yet to be convinced. I would also be interested if anyone knows of any non 16:9 screen laptops. I find this ratio too wide and not high-enough for the work I do. 16:10 or lower would be better. Any opinions would be appreciated. Alan

  Read the article

• Windows 7 Audio problem..

  - by Marcx

  hi, I've a dell studio 1555 bought on september with Windows 7 64bit Professional on it. Audio devide works proprerly, while listening/watching audio/video contents (from disk or internet) Using VoIP Program Ventrilo Audio from others people works good, and I hear their voices clearly... Using VoIP Program such as Teamspeak 2/3, MSN, Skype I hear a really disturbed voice, and it's impossible to comprehend somethings... Anyway I can say that the first week that I've bought and installed Win7 Skype worked good, this problem happened after I installed Ventrilo... I tried to remove it (ventrilo) but nothing happened:( Please help me :D Thanks Marcx

  Read the article

• How to connect to WPA2 encrypted wireless-network when booted from CloneZilla Live-CD?

  - by caligula

  My intention is to perform a backup of my laptop's (Dell Vostro 3350) sda1 disk to my desktop. After some googling I decided to use CloneZilla for that purpose. I have an OpenSSH server installed and running on my desktop. So I inserted CloneZilla CD to CD-rom, booted from it, then chose an option smth like "use ssh server to store image". Then I got an invitation to choose a network interface. I chose wlan0 and entered shell to manualy configure connection. And that's where I got into trouble, for wifi-network which I wanted to use is WPA2-encrypted, and I don't know how to connect to it from command line. Can somebody assist me. Appreciation for advance.

  Read the article

• Multi-monitor setup: one widescreen monitor, one regular (4:3) monitor; is this usually possible?

  - by stakx

  I'm trying to find out whether it's generally possible to have a multi-monitor setup with both a widescreen monitor and a regular monitor (ie. one with a 4:3 picture ratio). I'd like to run them in Extended Desktop mode on a Windows Vista machine. The computer is a Dell notebook with an onboard Intel GMA 4500MHD graphics chipset. While I know that this notebook is capable of driving multiple monitors, I don't know if it is also able to drive monitors with varying resolutions. Does anyone know if differing screen resolutions is generally a problem?

  Read the article

• Please help, I am losing my data?

  - by 5YrsLaterDBA

  I was trying to remove MSDN Library-January 2002 by using Revo Uninstaller. I allowed it to delelet those leftover registry entries(my fault, i should be more careful and don't do that). Now my machine is almost unaccessible, cannot open that Revo Uninstaller to recovery, cannot open Windows Explorer, cannot run CMD command from run, all executable shortcuts are not work anymore. I guess I have to reinstall everything but how can I get my data out of the machine? It is a Dell laptop with Windows XP. I am afraid if I restart my machine, my machine will not come back anymore. Please help.

  Read the article

• How to configure multiple iSCSI Portal Groups on a EqualLogic PS6100?

  - by kce

  I am working on a migration from a VMware vSphere environment to a Hyper-V Cluster utilizing Windows Server 2012 R2. The setup is pretty small, an EqualLogic PS6100e and two Dell PowerConnect 5424 switches and handful of R710s and R620s. The SAN was configured as a non-RFC1918 network that is not assigned to our organization and since I am working on building a new virtualization environment I figured that this would be an appropriate time to do a subnet migration. I configured a separate VLAN and subnet on the switches and the two previously unused NICs on the PS6100's controllers. At this time I only have a single Hyper-V host cabled in but I can successfully ping the PS6100 from the host. From the PS6100 I can ping each of the four NICs that currently on the storage network. I cannot connect the Microsoft iSCSI Initiator to the Target. I have successfully added the Target Portals (the IP addresses of PS6100 NICs) and the Targets are discovered but listed as inactive. If I try to Connect to them I get the following error, "Log onto Target - Connection Failed" and ISCSIPrt 1 and 70 events are recorded in the Event Log. I have verified that access control to the volume is not the problem by temporarily disabling it. I suspect the problem is with the Portal Group IP address which is still listed as Group Address of old subnet (I know, I know I might be committing the sin of the X/Y problem but everything else looks good): RFC3720 has this to say about Network Portal and Portal Groups: Network Portal: The Network Portal is a component of a Network Entity that has a TCP/IP network address and that may be used by an iSCSI Node within that Network Entity for the connection(s) within one of its iSCSI sessions. A Network Portal in an initiator is identified by its IP address. A Network Portal in a target is identified by its IP address and its listening TCP port. Portal Groups: iSCSI supports multiple connections within the same session; some implementations will have the ability to combine connections in a session across multiple Network Portals. A Portal Group defines a set of Network Portals within an iSCSI Network Entity that collectively supports the capability of coordinating a session with connections spanning these portals. Not all Network Portals within a Portal Group need participate in every session connected through that Portal Group. One or more Portal Groups may provide access to an iSCSI Node. Each Network Portal, as utilized by a given iSCSI Node, belongs to exactly one portal group within that node. The EqualLogic Group Manager documentation has this to say about the Group IP Address: You use the group IP address as the iSCSI discovery address when connecting initiators to iSCSI targets in the group. If you modify the group IP address, you might need to change your initiator configuration to use the new discovery address Changing the group IP address disconnects any iSCSI connections to the group and any administrators logged in to the group through the group IP address. Which sounds equivalent to me (I am following up with support to confirm). I think a reasonable explanation at this point is that the Initiator can't complete the connection to the Target because the Group IP Address / Network Portal is on a different subnet. I really want to avoid a cutover and would prefer to run both subnets side-by-side until I can install and configure each Hyper-V host. Question/s: Is my assessment at all reasonable? Is it possible to configure multiple Group IP Addresses on the EqualLogic PS6100? I don't want to just change it as it will disconnect the remaining ESXi hosts. Am I just Doing It Wrong(TM)?

  Read the article

• Why Buy Hardrives with storage server from a vendor?

  - by Mark

  Hi all, Im just browsing around at storage server's like the Dell MD100/ MD3000 and the Sun J4200 and although the storage server seems reasonable (approx $3000-$4000 AUD) the hard-drives that you buy to go along with them seems exorbitantly expensive. And I'm not sure why. Surely at most they are using good quality RAID level 7200rpm SATA hdd, but even then they are still charging almost 4 times the price. What is the advantage to buying these from them. I can see if one fails then the vendor replacing it is convenient. But at that price you could buy double the amount of hdd and just claim on warranty directly with the manufacturer. It would be much cheaper and you wouldn't be relying on someone else to fix your problems. Is this the case of "you don't get fired if you buy IBM?" mentality or is there some reason I'm not grasping here? Cheers Mark

  Read the article

• Need Recommendations: Network Software and Hardware Setup for small firm

  - by Rogue

  Will be starting a small graphics design firm soon, with 20 employees. Therefore need software to manage the network. Have bought a bulk license of Windows 7. I have a spare computer which can act as a server if necessary, but its an ancient Dell machine (Pentium-III). If required I would purchase an extra machine, but would like to avoid unnecessary costs at start up. Following are the main functions that I would like to perform: Need to monitor\control network traffic and internet usage, restrict access to certain websites Alerts when access to certain software's, and when trying to tamper with privileges Ability to view desktops of any computer at any given time Limit access to certain hardware like USB ports,etc Limit access to folders on the computer Log/Report of all actions including keystrokes performed on any computer Local Network chat and talk client Collaboration and Work logs Any Software available to do all of the above and also any additional hardware required besides network switches, network card's and CAT5e cables. Any other recommendations besides the above mentioned hardware setup

  Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >