Search Results

Search found 11077 results on 444 pages for 'floppy drive'.

Page 73/444 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

• Computer won't recognize second WD internal HD

  - by music man

  I installed a Western Digital Caviar Green 1TB internal hard drive, and want to use it for back up. My BIOS recognizes the device, but it is not recognized in Disk Management. It also is not recognized in "my computer." When I right-click my C drivepropertieshardware, I see it listed. First the drive was plugged into SATA port 1 on my motherboard, then I tried it in port 3, where it remains. I've been working on this for hours. Any help would be appreciated. More info Hard drive model #:WD10EADS-65M2B1 Windows 7 Home Premium 64 bit Service Pack 1 Computer:HP Model p6404y, Processor:AMD phenom II x4 820 2.80GHZ 8 gigs RAM

  Read the article

• Slow speeds on Samsung SSD PM800 256gb on a Lenovo W500

  - by cc0

  I recently bought a W500 with a 256gb samsung ssd drive. Now it seems ridiculously slow at writing. I am copying files at about 30mb/s, but I can read them at about 200mb/s. I tested it with the AS SSD Benchmark v1.4, and got a sequential writing speed of 34.64mb/s and reading speed of 196.95mb/s When I bought it the drive had only been in use for about 240 hours, and according to the CrystalDiskInfo app it had 98% health. Is there a bottleneck here somewhere? Or is the drive just plain bad. I'd really love it if someone could help me find some answers. The main relevant (I hope) w500 specs for this machine are; T9600 @ 2.8ghz 4gb ddr3

  Read the article

• Windows 7 - swap file on a USB disk? [closed]

  - by Sara Cohen

  Possible Duplicate: How to move the page file to another physical disk location Windows 7 I was given temporarily a PC, running Windows 7 Ultimate. The problem is it's hard drive is full, there are like 250 MB free. The swap file is set to none. It has 4 GB RAM. When I load a few tabs in Chrome or IE and start a game it runs out of memory. I already emptied Recycle Bin, %temp%, etc. Deleting/moving user files or adding RAM is not an option. Now I have a USB 3 7200 RPM drive, it's connected to a USB 3 port and is really fast. Is there a way to create a swap file on that drive?

  Read the article

• Western Digital My Book World drops off network

  - by Macha

  Most of my storage in my house relies on a WD My Book World Edition 500GB network drive. I threw out the vendor crapware they give you to access it (a trial version of Mionet) after it starting nagging me to upgrade, and set it up as a standard network drive using Window's Map Network Drive. However, since then, it has been dropping off the network after 30 minutes of non-usage. The only way to get it back on is to switch it off and on again at the plug socket. Does anyone know what is causing this, and hopefully how to fix it? EDIT: it's the original "blue rings" version with the latest firmware.

  Read the article

• Can my PowerMac G3 B&W really take a harddrive larger than 128GB?

  - by Josh Calvetti

  So it's a well known fact that the PowerMacs manufactured before 2002 cannot take a harddrive larger than 128GB. I have an old B&W that was running 10.4, and upon putting a 250GB drive inside, it told me that I had inserted a 128GB. That was expected. However, I recently decided to turn that machine into a Debian home file server. I shoved the 250GB drive inside, did some formatting, and now it tells me that it is a 250GB drive. Is this safe to use? Will all my data go corrupt after I've added more than 128GB of stuff? In case the specs are helpful to have, it's a 400MHz B&W, 1GB RAM, Rev. B.

  Read the article

• Partition External Harddrive already using Time Machine?

  - by Wex

  I have a 1TB external that I've used to backup my Mac for the past year using Time Machine. Unfortunately, my hard drive is getting close to full, and I'd like to move some of the stuff off of my Mac onto the same external drive. The problem is that the external drive is already full with my Time Machine Backups. I'd like to partition 750GB to the Time Machine Backups, and save the other 250GB for personal use. Is there any way I can go about this without corrupting my current backups? I'm willing to delete some of the older backups if necessary; again I'm just worried about corrupting the data.

  Read the article

• Replacing notebook SATA hard disk with SSD without reinstalling

  - by Graeme Donaldson

  So there's a notebook (Lenovo Thinkpad Z61m) with a SATA hard disk, the SATA controller is configured for native AHCI operation & the OS is Windows XP. The hard disk is going to be replaced with an SSD which is larger. I have an idea of how I'm going to do this, but I want to be sure there isn't something obvious I'm missing. Connect external USB drive Boot some flavour of Linux live CD Use dd to clone the SATA disk to the external drive Power off and replace the SATA disk with the SSD Boot the live CD Use dd to clone back from the external drive to the SSD Does anyone have anything to add?

  Read the article

• md5sum repeatedly gives different checksum for same file on same machine

  - by Joel

  I have a very small and quite old hard drive disk, about 32G. On to this disk I have copied a largish tar file, about 5G. When I run md5sum to generate a checksum on this file I repeatedly get different results (on the same machine and the same file). This obviously should not happen. If I repeat the experiment with a much smaller file, as expected the checksum is the same each time. I can only assume that because the large file is spanning most of the disk, and it is an old drive, I am experiencing a lot of read errors on the hard drive - and it needs replacing? Could there be any other good reason for this? Something I can do to fix the problem other than buying a new disk? Update: sha1sum also produces inconsistent results.

  Read the article

• MacBook Pro - 72k vs 54k rpm drives - Heat and Noise

  - by webworm

  I am looking at a new 15" MacBook Pro for development purposes. I am planning to run a Virtual Machine for about 50% of my work (Windows 7 x64, IIS, SQL Server, and VS 2010). The upgrade from a 54000 rpm drive to a 72000 rpm is only $45. From what I understand the faster rotational speed of the 72000 rpm drive will help virtual machine performance. However, I am concerned that additional heat and fan noise might be an issue. I will be running mostly on A/C power so decreased battery life is not a major concern for me. Since I would be running with a Core i7 processor which gives off a fair amount of heat already I was wondering if it might be best to stay at 54000 rpm for the hard drive. What do you all think? Thanks!

  Read the article

• SD card mounted as bootable image instead of FAT 32

  - by Benny Wong

  I have an SD card that I recently used to take photos on vacation. It have taken a lot of photos using it and worked fine on the camera. However, I had forgotten that a few months before this trip, I tried to make the SD card a bootable Xubuntu USB drive. So when I plugged my SD card in to copy the photos, the card mounts as the Xubuntu image, rather than mounting as the FAT32 drive with the images on it. The files must still be on the drive. Any ideas on how to fix this? (I'm using Mac OS X) Thanks!

  Read the article

• Using a non-validated SED on a Dell R720

  - by a coder

  We were given a Dell R720 a couple years ago, and the machine currently has standard 300GB 3.5" SAS 15k drives. Our RAID controller is a Perc H710. We need to update our disks to FIPS 140-2 certified SED. According to Dell, they have only one tested/validated FIPS SED for this machine/controller, but it is a 7200rpm 3.5" unit. I'm showing that Dell offers a 600GB 15k FIPS SED in 3.5" configuration (Dell part number 342-0605), but they say they haven't validated or tested to know if it works. They informed us that we would not void our warranty in using this non-validated drive. How likely is it that our R720 with H710 controller will work with the non-validated drive? Are there significant differences in how drive manufacturers build SED that would prevent them from working consistently across different controllers?

  Read the article

• Do SSD hybrid drives perform better than HDD + ReadyBoost flash?

  - by Chris W. Rea

  Seagate has released a product called the Momentus XT Solid State Hybrid Drive. This looks exactly like what Windows ReadyBoost attempts to do with software at the OS level: Pairing the benefits of a large hard drive together with the performance of solid-state flash memory. Does the Momentus XT out-perform a similar ad-hoc pairing of a decent hard drive with similar flash memory storage under Windows ReadyBoost? Other than the obvious "a hardware implementation ought to be faster than a software implementation", why would ReadyBoost not be able to perform as well as such a hybrid device?

  Read the article

• Does the advanced format tool bundled by manufacturers actually do anything which mkntfs doesn't?

  - by neurolysis

  I recently bought a new drive (specifically, a 2TB Samsung Spinpoint) that says on the label that it supports advanced format, and that I should download the tool from their site. Unless I'm missing something, mkntfs has always had its maximum sector size at 4096b: -s, --sector-size BYTES Specify the size of sectors in bytes. Valid sector size values are 256, 512, 1024, 2048 and 4096 bytes per sector. If omitted, mkntfs attempts to determine the sector-size automatically and if that fails a default of 512 bytes per sector is used. Will this tool on Samsung's site do anything other than format the drive in the same way doing mkntfs -s 4K /dev/sdb1 would do? To be specific, I'm intending to use this drive on a machine that will primarily run Windows XP, but I'd rather boot into Linux/BSD and format the disk manually than have bloated software. I do want to have the new AF style sectors though -- that's essential. So if I did the command above, would it have exactly the same effect as using the advanced format tool?

  Read the article

• Harddrive in the freezer ever work for you?

  - by Stefan Thyberg

  Once upon a time, my little 10 GB drive in my webserver failed and of course I had no backup, teaching me to immediately set up an automatic backup job afterwards. Anyhow, this drive refused to start and as a last-ditch effort I put it in a plastic bag and put it in the freezer overnight, since I had heard somewhere that it might work and I really didn't have any other options. The next day I take it out, immediately plug it in outside the case and lo and behold, the drive works long enough for me to copy my data off it. Have you ever had a similar experience with this method?

  Read the article

• Trouble accessing network drives in Windows 7

  - by Warlax

  Hi, Recently purchased a LaCiE network drive. Connected it to my router, configured it, added a user for myself. Installed the "Network Assistant" that came with it - no problem. Went to My Computer Network, found the network drive - was prompted for a login/password to see the contents, types \user and password (leading slash to get rid of DOMAIN) and accesses contents. There is one open share that I can access/mount without problem and there's another share with my user name as set-up via the network drive's web-based config. Double-clicked on that, prompted again. user/password doesn't work! It says I have no permissions but the user/pass combination is PERFECT. Some Windows Vista posts talk about a Local Security Policy menu - but that's nowhere to be found. Any ideas? (Windows 7 Professional BTW).

  Read the article

• Looking for a free or open-source burner emulator [closed]

  - by Jared Harley

  Possible Duplicate: Virtual CDR driver I am looking for a free or open-source virtual CD/DVD emulator to run in a Windows environment. What I want is similar to what SlySoft's Virtual Clone Drive or Daemon Tools provides, but the emulated drive needs to be a burner of some type. The burner should be able to save disc images (.iso, .ccd, etc) to my harddrive - basically, the same as if I burned the files to a CD-R, and then ripped them back to a disc image. I have already looked around some and come across 2 - DVD neXt COPY iTurns and NoteBurner M4P. Both of these programs create a virtual CD-RW drive, but they are integrated into their product (for burning from iTunes to create mp3 files) and cannot create disc images. I am currently writing a piece of software that will have the capability to burn disc images onto CDs/DVDs, and I don't want to end up with a 100 coasters while I'm testing my software. Anyone have any ideas? Related ServerFault queston: Create netbook recovery image without DVD burner (virtual burner?)

  Read the article

• Colored blocks on boot

  - by stackzerad

  When my laptop tries to boot right after POST I see colored blocks with flashing symbols in them. I am able to boot from windows PE cd. Tried fixboot and fixmbr with no success. I have also tried replacing boot files (ntldr, io.sys etc..) and removing video card drivers from windows\system32\drivers. The drive is seagate 2.5 ATA 160GB and has one NTFS partition on it. I have already fixed this issue by reformating the drive and reinstalling everything but after couple of weeks I get the same issue again. The diagnostics software shows no bad sectors on it and virus scan didn't find anything. Does anybody have an idea what this might be? UPDATE: tried defragmenting the hard drive just in case, but still no luck

  Read the article

• Delete the pendrive contents and also trash in Mac OS X?

  - by Warrior

  I am using a MacBook Pro. I copied some data from my pen drive to my Mac and deleted the content by moving it to trash. After that when I see the info of pen drive it give more value than the original value. If I cleaned the content of the trash only I am able to see the correct value of pen drive and able to copy data. Has Mac been designed like that or is there some other way to delete other than using the "move to trash" option? Thanks.

  Read the article

• Why are my flash drives getting formatted?

  - by user13743

  I've had two cheapie flash drive from Microcenter, and they booth out-of-the-blue became unformatted. When you insert then in the USB drive, windows says "The drive is not formatted. Do you want to format it now?" And then it can't actually format it. Nothing happened to them physically. For one, it 'died' during a reset, and the other, it was normal and then it was dead once when I inserted it, IIRC. What's the deal? Are these just cheap, crappy drives, or what?

  Read the article

• Recommendations for stable, reliable flash drives

  - by Josh Kelley

  We're looking to purchase some flash drives for use in some embedded devices. Most of our requirements aren't too different the generic "good, fast" flash drive: reliability is very important, speed is good, and so that the drive will fit, the case shouldn't be too large (so no OCZ Throttles). Consistency is also a major priority; we'd like to be able to buy more or less the same product a year or two from now without having to worry about the manufacturer swapping drive components with less reliable or slower parts. (We've been burned already by our previous manufacturer doing this.) Any recommendations, especially regarding consistency? I can read Ars Technica to get an overview of current models, but what are consistently good models?

  Read the article

• How to determine the best byte size for the dd command

  - by James

  I know that doing a dd if=/dev/hda of=/dev/hdb does a deep hard drive copy. I've heard that people have been able to speed up the process by increasing the number of bytes that are read and written at a time (512) with the "bs" option. People have suggested that the optimal byte size is due to sector size. I personally think it would have something to do with the amount of cache that the hard drive has. My question is: What determines the ideal byte size for copying from a hard drive? and Why does that determine the ideal byte size?

  Read the article

• help building a PC that can image a dozen hard drives simultaneously

  - by Bigbio2002

  Not sure if this belongs on here or SuperUser, but here goes... I'm trying to figure out how to make a mass hard drive imaging PC out of COTS parts. A dedicated imaging device can do 10 drives at a time, but costs several thousand dollars. So far, I'm thinking to use several 3-port PCI-E Firewire cards, and use some kind of Firewire-to-IDE adapter to connect the drives themselves. The "software" would consist of scripting diskpart, or some other imaging utility. The problem is that I can't seem to find any sort of adapter. I could use standard external hard drive bays, but then I'd have a dozen power cables that I need to plug in. Ugly, messy, and inefficient. I picked Firewire over USB not only for better transfer speeds, but also because FW can deliver power over the bus (and could theoretically power a hard drive). Does anyone have any input on this?

  Read the article

• Is it possible to run an Automator workflow when a USB device is connected?

  - by pkaeding

  I would like to run an Automator workflow every time I connect a certain thumbdrive to my OS X Snow Leopard system. This workflow will copy certain files from my hard drive onto the thumb drive. I have the workflow part figured out, but I don't know how to trigger it. Ideally, I wouldn't need to do anything; it would run as soon as the drive is mounted. Is this possible? Am I approaching this from the wrong angle? The solution only really needs to work on Snow Leopard. Thanks!

  Read the article

• Resizing partition in Windows 7: how long does it take?

  - by PaulJ

  Okay, maybe this is me worrying about nothing, but... I have a 500 Gb. external drive where I want to create a second partition. I plug it into my Windows 7 box, use Disk Manager and pick the "Shrink Volume" option. It says that the maximum amount to shrink is around 150 Gb. I hit "OK" and it starts working... and it's been going on for about half an hour. The light of the external HD is constantly working. Disk Manager is greyed out and has the "does not respond" message on the top bar; basically, it's behaving as a non-responding application. Is this normal for a drive of this size, or did the application hang? How long would it typically take for a drive like this to resize its partition?

  Read the article

• Delete the pendrive contents and also trash in Mac OSX?

  - by Warrior

  I am using a Macbook pro. I copied some data from my pen drive to my mac and deleted the content by moving it to trash. After that when I see the info of pen drive it give more value than the original value. If I cleaned the content of the trash only I am able to see the correct value of pen drive and able to copy data. Has Mac been designed like that or is there some other way to delete other than using the "move to trash" option? Thanks.

  Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >