Search Results

Search found 20284 results on 812 pages for 'internet archives'.

Page 73/812 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

• router - Problem Sharing internet connection in my router

  - by luis velasco

  Hi we are 4 roomates at the university but I have a problem. One of my roomies is downloading torrents all the time. When somebody need make a call or doing something like you tube or a quiz using the internet conection. The internet is very slow.... I can not create a network using a computer as a proxy. I just need a good router (and in the budget no more than $50).. I just want to split 16MB. In a separated 4 x 4 mb (theoretically)..

  Read the article

• iMac G5 20" (First All-In-One White Screen) Cannot Connect To Internet

  - by Goober

  The Scenario I've got an iMac G5 20" (First All-In-One White Screen) PPC. It has an Airport Extreme Network card in order to wirelessly to connect to the internet. For the most part I connect using ethernet as opposed to wirelessly, but recently have had the need to connect using the wireless. The Hardware BT Home Broadband Wireless Router. iMac G5 20" From about 5 years ago (First All-In-One White Screen) The Issue Even though I know for a fact that It has connected to the internet wireslessly in the past, for some reason it can discover the wireless router, but upon entering the password it fails to connect. I have tried multiple times to no avail. I have 2 other Mac's on the network and a pc that can all connect wirelessly. However both the mac's. Question Any ideas as to why my really old iMac G5 can't connect wirelessly anymore!?

  Read the article

• Losing WLAN connections but maintaining internet connections on WIndows 7 Workgroup

  - by Di

  I have 4 computers all running Windows 7 networked in a Work group through Billion 7404vgp-m wireless router.All drivers and firmware for wireless adapters and router are up to date. Windows Firewall and Defender disabled.Disconnected ipv6. Running Nod 32 anti virus software. All have own static IP address 192.XXX.X.XXX. When I Reset the router all computers have Internet and LAN access for about 1 hour and then they will lose the LAN connection but maintain Internet connection. Resetting wireless adapters or restarting computers does nothing to fix this but resetting router will. What is causing this and how do I fix it. Thanks Di

  Read the article

• Limit Windows PC Network/Internet Throughput

  - by Jon Cram

  I have a Vista x64 machine on a fairly fast Internet connection and either buggy drivers for the onboard Ethernet or faulty onboard Ethernet hardware. If I sustain too high a throughput on the Ethernet connection the network connection within Windows fails and I have to restart the machine to restore connectivity. I don't believe I can fix this issue (I'm erring towards faulty hardware) but would like to mitigate the effects by limiting my network throughput. I'm in a position where I would like to download a 5GB file from the Internet (a game install via Steam) and am certain that as this will take a few hours I will not be able to complete the download before my network connection within Windows fails. From downloading content through a BitTorrent client I have found that by limiting the download throughput to around 150 kilobytes per second I can maintain a steady network connection. I can't directly limit the throughput of the download through the Steam client and would instead like to find out how I can limit the throughput of my Ethernet connection within Windows. Any suggestions on how I can achieve this?

  Read the article

• Rate limiting an internet connection per user

  - by Alister

  I've got a friend who has a "rent-by-room" property and includes internet access as part of this. However some tenants are somewhat hogging the internet (i.e. constantly downloading). I was wondering if anyone knows of a fairly easy way of rate limiting each connection to make the system more equitable. A preferred solution would be a cheap piece of hardware or some sort of Linux "appliance". I would rather not have to get an iptables headache if this is avoidable.

  Read the article

• DIR 601 No wireless internet

  - by ashley

  I have an orange globe on my d link router. I signed into 192.168.0.1 and went to Manuel Internet Connection Setup as I was told to do. When I clicked on that and tried to clone my PC's MAC address, it said invalid MAC address. Host Name : DIR-601 Use Unicasting : (compatibility for some DHCP Servers) Primary DNS Address : 0.0.0.0 Secondary DNS Address : 0.0.0.0 MTU : (bytes) MTU default = 1500 MAC Address : F8:1E:DF:EA:38:E6 How do I get a valid MAC address so I can save the settings and move on to the next steps I was told to do in order to get wireless internet again?

  Read the article

• Losing WLAN connections but maintaining internet connections on WIndows 7 Workgroup

  - by Di

  I have 4 computers all running Windows 7 networked in a Work group through Billion 7404vgp-m wireless router.All drivers and firmware for wireless adapters and router are up to date. Windows Firewall and Defender disabled.Disconnected ipv6. Running Nod 32 anti virus software. All have own static IP address 192.XXX.X.XXX. When I Reset the router all computers have Internet and LAN access for about 1 hour and then they will lose the LAN connection but maintain Internet connection. Resetting wireless adapters or restarting computers does nothing to fix this but resetting router will. What is causing this and how do I fix it. Thanks Di

  Read the article

• How to access my local host server from internet

  - by rahul.p.33

  How to access my local host server from internet have installed WAMP server on my Windows XP, And i had created a index.php file in my root folder, and i assigned a virtual name to my localhost. eg: earlier i accessed my index.php via: Code: http:// localhost/ index.php but now i can access like : Code: http: //www. mysite. com/index.php but the problem is that i can access this from my computer only.. how can i use it from internet.. please help me.... Thanks.

  Read the article

• How to access my local host server from internet

  - by rahul.p.33

  How to access my local host server from internet have installed WAMP server on my Windows XP, And i had created a index.php file in my root folder, and i assigned a virtual name to my localhost. eg: earlier i accessed my index.php via: Code: http:// localhost/ index.php but now i can access like : Code: http: //www. mysite. com/index.php but the problem is that i can access this from my computer only.. how can i use it from internet.. please help me.... Thanks.

  Read the article

• On a Mac, how are connections (possibly by spyware) made to outside internet addresses during initia

  - by TT

  I am trying to secure a Mac after discovering that network links are being established to some unwanted internet sites. Using 'lsof -i' (list open 'files', internet) I have seen that launchd, ntpd, firefox, dropbox and other processes are either 'LISTENING' or have 'ESTABLISHED' links to a site or sites which I suspect have to do with spyware. I have been trying to find startup files and preference lists that initiate thise links but can't find them. I could easily reinstall the OS and restore data from a backup but I'd prefer to know how to fix this as I have six Macs to look after. Thanks...

  Read the article

• Loggon to Internet Hotspot from within Linux Terminal

  - by Saif Bechan

  For internet I use a local Hotspot service. I have internet when I start my browser and fill in my username and password. This stays as long as I do not shut down my PC for a while. I run some virtual machines, centos, debian, from the command line. I run these just for small test purposes, nothing special, and security is not an issue for me at all. I want to have these VM's connect directly to the hotspot if this is possible. So they each have there own IP. I have enough hotspot accounts to do so. I can do this with a bridged connection in VMware which works find with a GUI. But I run these OS's from the command line. I only need to know a way how to get the hotspot to validate my credentials. Is there a way of doing this without having a gui.

  Read the article

• Firewall software that can block access to certain applications on certain internet connections

  - by webmasters

  I have two internet connections, a LAN and a 3G modem on a Windows 7 machine. The LAN is connected to a Edimax router which is conneted to the ISP (with their own modem). Now, the Edimax router is set to auto assign IP adresses in the range: 168.192.2.100 and 192.168.2.200 I wanted to block internet explorer to access the LAN. I entered my AVG firewall, selected iexplorer and added a "block" rule which blocked all ports, TCP and UDP protocols for the above IP range. The problem is it did not work, not matter what rules I have tried. Can you recommend a firewall that can easily accomplish this? Ty

  Read the article

• internet connection drops randomly

  - by Remus Rigo

  hi all I have 3 PC's at home (with Win XP, Win 7 & Win 7) and a router. I am always connected to the internet through the router (PPoE connection). My problem is that sometimes when I want to search or open a page, my browser tells me that the server cannot be reached, as if I don't have a connection to the internet. Other times it logs me out from messenger, but browsing still works. FTP download/upload also works. If i disable and enable the LAN then all works fine. The connection doesn't always drop on all three PC's at the same time. Anyone got any idea besides re-installing OS? thanks

  Read the article

• How to share internet connection on Mac os x to Virtualbox vm's using Host-only

  - by redben

  In one line : is the following possible : Airport <- osx bridge - vbox-Host-only - vm's On a mac os x, i have virtual box with a virtual machine. For now i have configured 2 interfaces for my virtual machine eth0 is normal bridge for my vm to acces the internet (when airport is connected) eth1 is set to host-only so i can access my vm from the host when there is no wifi/aiport is down. So basically it's like Adapter 1 when there is Wifi, Adapter 2 when there is not. I'd like to have only one configuration to make it simpler. I thought i could just keep the Host only configuration, and on the host (os x) go to internet sharing and select "share from airport" to vboxnet0 (the vb virtual interface). Only to find out that vboxnet0 dosn't show up in the interfaces list on os x preferences. I know that on a linux host you could install something called bridge-utils and use that to bridge the two insterfaces. Is there any thing like that for Mac ?

  Read the article

• Block access to certain websites from other computers on shared internet connection

  - by Dheeraj V.S.

  I have very little knowledge about networking. I have an internet connection on my PC (running Windows XP). I've enabled internet connection sharing to other computers on my network connected using a WIFI router. I want to block use of GMail (in general, specific domains) from other computers, but should be able to access them from my own machine. I can't edit my hosts file because my machine too would lose access. I guess I need to configure my wireless router for that. But I have no idea how to do so. My wireless router is a Zyxel P-660HW-T1 v2. I'd appreciate any pointers.

  Read the article

• help with internet

  - by Remus Rigo

  hi all I have 3 PC's at home (with Win XP, Win 7 & Win 7) and a router. I am always connected to the internet through the router (PPoE connection). My problem is that sometimes when I want to search or open a page, my browser tells me that the server cannot be reached, as if I don't have a connection to the internet. Other times it logs me out from messenger, but browsing still works. FTP download/upload also works. If i disable and enable the LAN then all works fine. Anyone got any idea besides re-installing OS? thanks

  Read the article

• Firefox 4 refreshes all tabs although no internet connection exists

  - by Maxim

  I have a problem since I updated to Firefox 4. With Firefox 3.x I could start it without a internet connection and almost all of my open tabs were still loaded. With this I was able to read my open sites in the train where I have no internet connection. This does not work in Firefox 4. If I launch Firefox 4 I see all my open tabs but the content is not available. It seems that the new version tries to refresh all tabs on startup. Is there a possibility to disable this behaviour? Thanks in advance. Regards Maxim

  Read the article

• CentOS connect to the internet

  - by Delirium tremens

  I installed CentOS, but it didn't automatically connect to the internet. Is that the normal behavior? I have Ethernet Broadband Router DI-604 and WebStar DPX2203 series Cablemodem with EMTA . What should I do to connect to the internet? Update: A cousin told me my ethernet adapter or network board will depend on my motherboard. My computer upgrade document says the motherboard is gigabyte video onboard. I heard gigabyte's network adapters are Gigabit or Realtek. In CentOS, System - Administration - Network - New - Ethernet, first, only "Other Network Board" was listed, so I selected it and clicked Next, then there wasn't Gigabit, but there was Realtek, so I selected Realtek. I heard with Net Virtua selecting dhcp the things first answered asked me to tell first answerer are automatically configured. So I tried Realtek with dhcp, but it still didn't work.

  Read the article

• software to emulate a blackboard over internet

  - by Abhijith Madhav

  I need to tutor my brother on a particular topic. We live in different geographical areas. We use g-talk to do the same. We do not have web-cam's to enable video chat. The tutoring will involve a lot of off-the-cuff illustrations. I am hence searching for a suitable software which will emulate a blackboard over an internet connection. I need the software to enable sharing of a common canvas on which I can draw, write and point to. Say a Microsoft paint canvas on internet. Could you point out a suitable software? Google is not of being help at the moment as I suspect that I am not specifying my search criteria properly.

  Read the article

• Wrong source IP when accessing internet directly from TMG server

  - by jarod1701

  Hi everyone, after implementing a ForeFront TMG server I'm facing only one problem: After I added a second IP to the external adapter I had to manually set "NAT Address Selection" inside the network rule "Internet Access" to the first IP since all others would get blocked by the CISCO firewall. This configuration works as long as traffic comes from the internal network (e.g. browser on clients). Traffic from the TMG directed to the internet always carries the second IP as it's source address and gets blocked. All our other TMGs/ISAs are running fine and I never came across this problem- Does anybody have a clue, coz I don't?! Kevin

  Read the article

• How to share internet connection on Mac os x to Virtualbox vm’s using Host-only

  - by redben

  In one line : is the following possible : Airport <- "osx bridge" - vbox-Host-only - vm's Virtualbox (3.1.4) setup : Host : Mac OS X 10.5 Guest : Ubuntu Linux adapter1 - Bridged (en1: Airport) : To give the vm access to internet and communicate when Airport is connected adapter2 - Host-Only (vboxnet0) : To enable host/guest communication when Airport is not connected I'd like to make it simpler and only keep adapter 2 (host-only) and relying on os x connection sharing/bridging I thought i could just keep the Host only configuration, and on the host go to internet sharing and select "share from airport" to vboxnet0 . Only to find out that vbox's virtual interface doesn't appear in the interfaces list on os x preferences. I know that on a linux host you could install something called bridge-utils and use that to bridge the two insterfaces. Is there any thing like that for Mac ?

  Read the article

• IP Camera working on lan but not on internet

  - by Kevin Boyd

  My IP cam model is Genius 350TR, I tested the cam at home on lan and internet and it worked. Then I shifted it to an office. It works on the office lan setup but I cannot connect to the ip cam from home. The IP cam is configured for port 192.168.0.30:7070 and it has a port forwarded to publicIP:7071 When I telnet to that public IP it connects to that port. However when I try to access the ip cam from a web browser it only shows me the configuration page and settings and the video is blank and it says connecting for some time and then says disconnected. The cam is configured for HTTP on internet and UDP on Lan. The office setup is ISP --- WifiRouter --- PC With Wifi card --- Switch --- IP CAM Is there a way to debug this problem?

  Read the article

• Connecting to local Sql server 2005 through Internet

  - by Manish

  Hello My Sql server is on Local Machine, I want to access it through Internet. I Configure Surace manager and Configuration manager of sqlserver 2005 for remote access. My sqlserver is running on port:1433 I am using port forwarding , I can access service of other ports, My Connetion String Is: Data Source=190.190.200.100,1433;Network Library=DBMSSOCN;Initial Catalog=myDataBase;User ID=myUsername;Password=myPassword; But it gives following error when i am trying to connect sql server through internet: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)

  Read the article

• Ubuntu VPN Server (PPTPD) Configuration - Pass Traffic to Internet

  - by SnAzBaZ

  I am trying to configure PPTPD on my Ubuntu box to pass all VPN traffic through to it's internet connection, so I essentially want it to work like a Proxy. I think the problem is that no default gateway is being assigned to my PPTP client (Windows 7). I can connect to the VPN fine, I get an IP address and DNS servers but no default gateway. Do I need to configure a specific option to tell the VPN server to forward all traffic it receives down it's eth0 port and out to the internet. Thanks!

  Read the article

• Two VPN (internet) connections rounting (win2003)

  - by tmp3128

  Here is my setup: - win2003 server (ISA installed) with 3 NICs:   1) internal network   2) ISP 1 (default) network (DHCP enabled)   3) ISP 2 (backup) network (DHCP enabled) - several "normal" PC within internal net - one "special" PC within internal net Both ISP 1 and ISP 2 provide access to internet and their resources thru their VPN connections. The goal is to enable all "normal" PCs to use internet from ISP_1's VPN connection and "special" should use only ISP_2's VPN connection. Futhermore all "normal" and "special" PCs should have access to several servers accesible only thru ISP_2's VPN connection. I have some thoughts how to achieve this but I want to be certain because everything should be configured as quickly as posible, avoiding significant downtime. windows-server-2003 isa routing vpn

  Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >