Search Results

Search found 4142 results on 166 pages for 'lost hobbit'.

Page 73/166 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

• Setting Boot and Mirror Disks correctly at the Solaris OBP

  - by Shaun Dewberry

  I am recovering a domain that was lost due to power outage on an Sun Fire E25K server. I know how to set the appropriate parameters at the openboot prompt using nvalias/devalias, boot etc. However, I do not understand how one gets from the output of show-disks {1a0} ok show-disks a) /pci@1dd,600000/SUNW,qlc@1/fp@0,0/disk b) /pci@1dd,700000/SUNW,qlc@1/fp@0,0/disk c) /pci@1dc,700000/pci@1/pci@1/scsi@2,1/disk d) /pci@1dc,700000/pci@1/pci@1/scsi@2/disk e) /pci@1bd,600000/SUNW,qlc@1/fp@0,0/disk f) /pci@1bd,700000/SUNW,qlc@1/fp@0,0/disk g) /pci@1bc,700000/pci@1/pci@1/scsi@2,1/disk h) /pci@1bc,700000/pci@1/pci@1/scsi@2/disk q) NO SELECTION Enter Selection, q to quit: to the correct full disk path. I know it is basically one of the pci/scsi paths listed above, but in all instruction or examples a string of additional characters is appended to the path to specify Targets and Units but the explanation of the path construction is never given. Could someone please explain how to construct this disk path correctly?

  Read the article

• Can I extend my total RAM by buying more, and what kind do I need to buy

  - by Xeon06

  I currently have 4 GB total RAM and I would like to get some more, to bring it to a total of 8 GB. Is it possible to simply buy another 4 GB and bring it to 8? If so, what kind should I be buying? There is a lot of different possibilities, DDR3, DDR2, clock speed, etc. I am kind of lost among all this. My current setup goes like this: ACER EG43M mainboard Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz 4 total RAM slots, 2 occupied by 2 GB sticks According to CPU-Z, my memory type is DDR3 (not sure how reliable that is) Full CPU-Z dump Windows 7 64-bit So basically, I want to know whether it's possible to extend my current RAM to get 8 GB total by buying another 4, and if so, what kind of RAM do I need? Note that I am not looking for shopping recommendations. I'm worried about the hardware compatibility.

  Read the article

• Which particular file caused "Delayed write failed" error?

  - by user35020

  I sometimes get this error when resuming from hibernation: Delayed Write Failed: Windows was unable to save all the data for the file G:\$Mft. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. I know this is caused because the hard drive (G:, an external USB drive) was (a) plugged in when I hibernated and wasn't ready at wake-up, or (b) I simply forgot to plug it when resuming from hibernation. My question is: is there any way to see which particular file/folder/etc failed to be written? The hard drive functions correctly before and after, so there seems to be no permanent damage. Is there a detailed log someplace or a utility? I've searched but found nothing. Thanks for any help!

  Read the article

• How to set up VPN connection? Virtual Box 3.1.4 installed. Host - Snow Leopard(Mac) Guest - Windows

  - by user31954

  I have Virtual Box 3.1.4 installed. Host - Snow Leopard(Mac) Guest - Windows 7 (32-bit). I have installed Windows on my MAC because I need it for work. I cannot establish VPN connection (using NAT). I tried to use bridged adapter, and I lost my internet connection on my guest(wind7) completely. I don't know much about networking, so I need detailed instructions for his particular OSs. Could someone please help me with this? Some random details about my attempts: On my host Windows I get error 800 trying to VPN. I can ping server address from my guest Win 7 and I have VPN connection established from my host Mac. I do disable VPN on my Mac when tying to establish it through guest. I tried to VPN from Mac and see if Guest sees it. It doesn't. Thank you!

  Read the article

• VMWare Player 5.0 Upgrade - Bridged Networking No Longer Works

  - by Syndog

  I've been using VMWare Player 4 on my Windows 7 PC, running my VMs under a bridged networking configuration without any problem. I settled on bridged networking two reasons... I often use VMs to host web applications for test purposes. I never could get NAT to work for me anyway, but no love lost, considering reason #1. Now that I've upgraded to VMWare Player 5, the situation has completely reversed. In other words, bridged networking no longer works at all, and NAT does. Has anyone else come across this? Any ideas on getting bridged networking to work again? This happens with both Windows and Linux guest OSes. VMWare Tools has been fully updated. I've tried the usual vmnetcfg.exe utility fix, to no avail.

  Read the article

• Linux command line based spam checker?

  - by anonymous-one

  Does a command line based spam checker exist? We have created a mailbox at a 3rd party, and unfortunately decided on spam checking 'disabled' in the initial setup. There is no way to re-enable spam checking, the mailbox must be delete (and thus all contents lost) and re-created. Does anything exist where we can pump in either: A) Subject + from + to + body + all other fields. OR B) Raw message dump (headers + body). And the command line will let us know weather the email is possibly spam? Thanks.

  Read the article

• Logging in over ssh in a different session?

  - by Jordan Reiter

  I don't know exactly what the correct term is, but I notice if I log in to a remote SSH server, then close the window, open a new one, and log into that server again, my bash history and user processes appear to be different. For instance, if I started a background process I can't get back into it, or something I typed won't show up in my bash history. The problem is for some reason occasionally something happens to my remote session and instead of being disconnected the session just hangs; I have to close the window and open a new one to reconnect. As a result sometimes it means a long running process basically is "lost" since I can't get back into it. Is there any way to set it up so that when I log back in I log back in to the same "session"? This is using OS X Terminal.

  Read the article

• permission for "users" directory for a mounted vmdk file

  - by rajmalhotraml

  I mounted one vmdk file in my windows 8 machine and I am able to access all the folders and files except those in "users\ directory. When I try to open, it says I dont have permission. I am not able to give the permission even. Any one can tell me how to open the users directory? I have very important files in the desktop folder which can be acessed through \users\\desktop. What is the alternate way of accessing the folder? I lost the password to boot up the vm image.

  Read the article

• Network flooded with seemingly empty packets

  - by Adam Particka

  Let me preface this with the fact that I'm just a web developer at my company with little networking knowledge. Earlier today there was a department that lost all of their network connections so I popped open Wireshark and observed the influx of packets to my machine. There was normal traffic (ARP requests, etc.) coming in at ~50 packets every second. Then all of a sudden the log was flooded with packets arriving ~5000 a second. It looks as though they all contain the same data, just a looped sequence. We have someone here looking at it but I thought I would ask if anyone had seen anything like this before. Here's a selection from one of the captures in Wireshark. http://www.cloudshark.org/captures/06f950725c74

  Read the article

• Saving backup files automatically in (g)Vim after saving a file.

  - by Somebody still uses you MS-DOS

  I had a problem with my gVim. I lost some important modifications after I plugged on my machine after a hibernating process. To avoid this kind of problem, I would like to know if it's possible to add something in my .vimrc (or a plugin) that automatically backups all saving made to my files. Disk space is not an issue, I can delete these files after. I'm already using set backup set backupdir=~/.backup/vim set directory=~/.swap/vim This creates a myfile.extension~ in my .backup/vim. ...but I would like this configuration to add ~ to first save, ~0 to second, ~1 to third, ~2 to fourth, and so on - something that keeps copies from all modifications I made to a file. Is this possible? Do you know if there's a plugin for this?

  Read the article

• Automatic Reply Out of Hours

  - by Inbr3d

  Is there a way i can use a rule or "timer" of some sort to turn on out of office, or enable an auto reply for 1 mailbox (Sales mailbox) within a time period. Reason: We deal with all timezones, we only open 6am-8pm. critical sales are sometimes lost the automatic reply will involve a telephone number for emergency sales. (yes, spam i know) I wish the auto reply to come from "[email protected]" if this is possible. I've lokekd at transport rules, cant see anything. I cant word my question well enough for google to give an answer.

  Read the article

• Meeting reminders disappearing after accepting

  - by stayinwett

  I have a particular user whose Outlook is acting up. Whenever he accepts a meeting invitation from a specific person, the reminders get turned off in the calendar. Every other person who got the meeting invitation still gets the reminders. This is the only thread that I found somewhat relevant: http://www.eggheadcafe.com/software/aspnet/32118199/lost-functionality-when-accepting-meeting-requests.aspx This is weird though because he doesn't have any rules that should cause the meeting invitations to be stored in a weird folder or anything, they are left alone. I tried loading his profile and accepting the invitation on my end, and it went through fine (it was marked down in the calendar with a 15 minute reminder). When I looked at previous meetings he accepted from that person, there is indeed no reminder set. Any suggestions? Windows XPSP3, Outlook 2007, Exchange 2k3

  Read the article

• new GIT release engineer here, being asked what is the best way to do development with git?

  - by marlene

  I have been searching the web for best practices, but don't see anything that is consistent. If you have an excellent development process that includes successful releases of your product as well as hotfixes/patches and maintenance releases and you use git. I would love to hear how you use git to accomplish this. Do you use branches, tags, etc? How do you use them. I am looking for details, please. Thanks for hosting this great forum. Lost in Gitland

  Read the article

• Can't connect to ssh after nfs problem

  - by MihaiM

  Hello, I had a problem yesterday with a server that lost connection (S1). From that server, there was a dir shared with NFS to another one (S2), no homedir and not in $PATH, but a dir to store old files for archiving. S1 was back online after a few hours, but now I cannot access S2 because of this (and I'm sure it's because of that because all other services are running without any problem). The ssh connection hangs here: debug1: Entering interactive session. I know a reboot will do the job, but considering this is the NAS of a big app, my bosses will kill me if I do it. Is there any other way to get over this? I tried with different users, but all of them hang in the same place. I connected with HP iLO and not even there I cannot use my username. Thanks in advance.

  Read the article

• How to copy data (clone) from one partition to another in Windows XP?

  - by Martin

  I have installed a new hard drive in our PC running Windows XP and I wonder how to transfer the data from the old (small) data partition to the new (large) one. My question concerns only a data partition containing files and folders (not the boot partition with the Operating System files!) Is it ok to just copy the folders in the Windows XP Explorer to the new partition? Could anything be lost this way (hidden folders, metadata, ..)? What is the best way to clone a data partition in Windows XP?

  Read the article

• Restoring raid 5 array after bios flash

  - by cogergo

  I have just flashed my BIOS and now my machine does not detect my raid5 array! It has three 2TB drives in it so that is a LOT of data that will be lost! I have NOT deleted the array and it does not offer me to reboot I'm using Nvidia MediaShield! and Windows 7. Any ideas guys? Thanks! Update: here is the GUI raid configuration. As you see it shows one disk in the array but for some reason not the other two! Click for image of raid configuration error

  Read the article

• Can't ping my computer - "Transmit failed. General failure."

  - by Vaccano

  I am having an issue with my computer. My IIS services are not working. I have narrowed it down to the fact that my computer cannot find itself via its name. I try pinging my computer by its name and I get this: C:\Users\18773ping MyComputerNameHere Pinging MyComputerNameHere [::1] with 32 bytes of data: PING: transmit failed. General failure. PING: transmit failed. General failure. PING: transmit failed. General failure. PING: transmit failed. General failure. Ping statistics for ::1: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), I tried having someone else ping my machine and it works fine for them. Any ideas?

  Read the article

• Linux (Ubuntu) USB Auth

  - by themicahmachine

  I want to be able to authenticate with PAM using a USB drive with a file on it. I've read about how to do this with a PAM module that reads the specific USB hardware ID of a device, but if the device malfunctions or is lost, there would be no way to authenticate. I would prefer to use the method BitLocker uses, requiring a particular file to be found on the drive in order to authenticate. That way I can keep another drive in a secure location as a backup. Any other suggestions are welcome. I just want to require a higher level of security that just a password.

  Read the article

• Ubuntu USB flash boot drive gets spontaneous "Unhandled sense code" error and causes drive to switch to Write protected

  - by Steve

  What happens is that the system runs fine for several days or even a week and then suddenly the root file-system / goes read-only. Looking at the syslog it shows that there was an 'Unhandled sense code'. This is under Ubuntu 10.04 but I saw the same thing with Ubuntu 9 with different flash media. /dev/sdg1 on / type ext4 (rw,errors=remount-ro) Jun 26 08:50:04 host1 kernel: [926247.565090] sd 5:0:0:0: [sda] Unhandled sense code Jun 26 08:50:04 host1 kernel: [926247.565094] sd 5:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jun 26 08:50:04 host1 kernel: [926247.565098] sd 5:0:0:0: [sda] Sense Key : Data Protect [current] Jun 26 08:50:04 host1 kernel: [926247.565103] sd 5:0:0:0: [sda] Add. Sense: Write protected Jun 26 08:50:04 host1 kernel: [926247.565108] sd 5:0:0:0: [sda] CDB: Write(10): 2a 00 00 46 29 18 00 00 08 00 Jun 26 08:50:04 host1 kernel: [926247.565117] end_request: I/O error, dev sda, sector 4598040 Jun 26 08:50:04 host1 kernel: [926247.569788] Buffer I/O error on device sda1, logical block 574499 Jun 26 08:50:04 host1 kernel: [926247.574677] lost page write due to I/O error on sda1

  Read the article

• Outlook 2010 Folder Structure Search

  - by SaUce

  I work at a helpdesk and today I received a call from a user who lost a folder in Outlook. When I connected to the user's PC, I discovered that the user has several hundreds of folders. She had the same name folder in several different locations. When we used Advanced Find we found the messages. It said that messages are located in folder X. The only problem was, we could not locate the folder X in the list. Does anyone know of any way to quickly and easily browse all the folders or look up a folder in Outlook 2010?

  Read the article

• Can I restore closed tabs after quitting Chrome?

  - by Sammy

  I closed Chrome by accident. Now all the tabs I had open are presumably gone. I don't want to risk anything by starting Chrome now before asking for help. I fear that they will be permanently lost (overwritten files) if I do that. I know from past experience with Firefox that restoring tabs and browser sessions can be a tricky business. What can I do at this point? Is there a file or something I need to copy or rename? I know about the Ctrl+Shift+T command. But I normally use this while browsing. Will this work AFTER closing Chrome?

  Read the article

• "Clear Text Credential Access Enabled" field

  - by Dave

  Searching for answers about the "Clear Text Credential Access Enabled" field, I found a question on an oracle forum that was my exactly what I was trying to find out. Thinking that my answer would soon be found, I happily click on the link only to find zero replies. All hope was lost. I am posting the question here, hoping that someone on this site will know the answer. Can somebody please explain the usage of "Clear Text Credential Access Enabled" checkbox under "-Security-Advanced tab for Weblogic 11g? What is the difference if we set or unset this flag? If I dont set this flag I get an exception like "Access to sensitive attribute in clear text is not allowed due to the setting of ClearTextCredentialAccessEnabled attribute in SecurityConfigurationMBean" when I try to set a value for the "Credential" field. But what should be the value for "Credential" field if I dont set the "Clear Text Credential Access Enabled"flag?

  Read the article

• Filter email view in Lotus Notes

  - by Jakob S.

  From MS Outlook I am used to have an input field above my list of mails where I can type in a filter string such that every mail not matching this string vanishes. I remember that once - by accident (pressing a weird combination of keys because the window I was actually working in lost focus) - I got something very similar in Lotus Notes. So I think there must be something like this out there, but unfortunately I cannot find it anymore. Does somebody know how to get this kind of functionality in Lotus Notes? Thanks!

  Read the article

• Oracle 10g Failover Database - How to fail back?

  - by rrkwells

  I want to know how the failover database concept works after recovery. We have defined our application to connect to a backup database in case the production database fails. If this happens, then all the transactions will be happening on that backup database. Once the production db server is running again, then how do we make sure the changes made in the backup database will be reflected on the production database? We want to make sure that any changes made while failed over are not lost. We are using Oracle 10g.

  Read the article

• SAN for Medium Business - Where to start? [closed]

  - by Henson

  I've always run Linux on my home computers, and done PC repair for years, but this is my first experience with needing to buy a SAN. I thought I was knowledgeable, but I feel a bit lost. I need to be able to support 25 VMs, which are currently managed through vSphere. The company I'm at is growing quickly though, so I'd like to plan for the future. Ideally, I want a solution that I can just tack arrays onto and manage as one large, iSCSI drive. Suggestions? Good resources? If I can find something that appears to software as one large drive, am I better off going with a solution like FreeNAS or Starwind, or an all-in-one proprietary solution like NetApp? Cost, is (of course, and always I'm sure) an issue.

  Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >