Search Results

Search found 8705 results on 349 pages for 'perl scripts'.

Page 73/349 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

• Why does printf report an error on all but three (ASCII-range) Unicode Codepoints, yet is fine with all others?

  - by fred.bear

  The 'printf' I refer to is the standard-issue "program" (not the built-in): /usr/bin/printf I was testing printf out as a viable method of convert a Unicode Codepoint Hex-literal into its Unicoder character representation, I was looking good, and seemed flawless..(btw. the built-in printf can't do this at all (I think)... I then thought to test it at the lower extreme end of the code-spectrum, and it failed with an avalanche of errors.. All in the ASCII range (= 7 bits) The strangest thing was that 3 value printed normally; they are: $ \u0024 @ \u0040 ` \u0060 I'd like to know what is going on here. The ASCII character-set is most definitely part of the Unicode Code-point sequence.... I am puzzled, and still without a good way to bash script this particular converion.. Suggestions are welcome. To be entertained by that same avalanche of errors, paste the following code into a terminal... # Here is one of the error messages # /usr/bin/printf: invalid universal character name \u0041 # ...for them all, run the following script ( for nib1 in {0..9} {A..F}; do for nib0 in {0..9} {A..F}; do [[ $nib1 < A ]] && nl="\n" || nl=" " $(type -P printf) "\u00$nib1$nib0$nl" done done echo )

  Read the article

• Multisystem Script won't work! "Syntax error:redirection unexpected" Worked 2 days ago?

  - by user74005

  this is my first question. I use Multisystem all of the time and have installed it on both Kubuntu and Ubuntu and have used it with no issues. I wiped my hard drive to try some new OSs I'm now using the exact same OS (Ubuntu 12.05) I used to load my USB stick to begin with and now I'm getting this ridiculous syntax error. I know the script is correct, I'm following the exact same steps I used to get to this point and I'm getting different results ?!?! I'm very confused by this. I have no clue how to begin addressing this issue. I get the same syntax error on Kubuntu now too, which did have multisystem installed. I run "sh install-depot-multisystem.sh" and get "Syntax error:redirection unexpected", this worked literally 2 days ago. The only thing that has changed is my face has grown some more facial hair and my head hurts from bangin it against the wall over this issue. The OS is exactly the same, the script is the same; but now it won't install. I'm lost and really hoping someone can help. Append Just to append to this a bit https://lists.ubuntu.com/archives/ub...er/000264.html I needed to do a chmod 777 on the script, I'm still getting a syntax error on Kubuntu...but it did install successfully. I'll mark this as resovled! Thanks anyway, I'll try to spruse up on my Linux skills.

  Read the article

• need a different backup solution

  - by DigitalJedi

  I just built a new media/backup server using Ubuntu 12.04 64bit. I installed a hard drive to be used only for music, pictures, and videos and formatted it fat32 so my 1 and only Windows PC could map those folders as netshares. My laptop, also running Ubuntu 12.04, is what I am using the most so new media is first downloaded on my laptop. I've already got the music, videos, and pictures folders from my server mounting as shares on my laptop on boot thanks to some fstab edits and sshfs. Now I'm wanting either an app or script that could backup any new files I add to my local media folders to the mounted folders on my server. I've been Googling all day and found a few apps like rsync but they seem to have issues with ext4 to vfat backups. I thought maybe a script would be best but I'm new to scripting in Linux and don't want to mess anything up. Basically I am looking for something that will backup only newly added files to the server. I figure I could schedule it once a week. There are some stipulations. For example, my local music folder has over 700 folders for each artist/band then sub folders inside those for albums. I want something smart enough to only copy newly added content so I'm guessing the modified date would probably be a good condition if I were scripting. I'm rambling. Any suggestions would be GREATLY appreciated. I'm not finding anything to suit my needs. I'm almost to the point of just learning bas scripting so I can write something but then it will be a couple weeks or so before I have a possible solution and I'd like something in place sooner.

  Read the article

• Periodic script execution

  - by Vagelism

  I made a script that sends my local sensors temperature to a server in the internet and then I can see a graph of it. Everything works fine when I execute it manully. I have the latest ubuntu version. When it comes to run periodically every minute with crontab then nothing works. It doesnt send anything. I tried to run it as SUDO and as user, I tried to add it in the crontab file to run it from several locations like /bin/myscript.sh , /user/Desktop and many others...Nothing seems to work. Any Idea how to solve it? Thank you!

  Read the article

• bash script ask for root password

  - by VinceBrowning

  I want have a script that I can give to friends which will add repositories and download files, install them without having to use command as they are not command line savey and have no desire to learn. I need to know how to get the script to prompt them for the root password to allow them to do some of these functions. How would I go about this? Please don't hate on them.. Getting them to start using Linux was a big step and I am just happy that they are attempting something new... and it was in the open source world..

  Read the article

• Task Scheduler not able to execute .vbs scripts successfully

  - by Django Reinhardt

  Apologies if this has a really obvious answer! We have several daily tasks we run via a .vbs script on our server (through the Task Scheduler), and for months it has been fine, but recently we've hit a problem. The .vbs scripts stopped successfully executing (always timing out)... but could still be executed manually with no problems(!). Not knowing any good reason why the Task Scheduler should start having problems, we thought we'd try a little "creative thinking", and run the .vbs another way: Via a .bat file executed by the Task Scheduler. Again we hit weird issues, but with a little more debugging information, this time around. The .bat file run by Task Scheduler is nothing more than... CScript "C:\location\script.vbs" > Log.txt But after an attempt to run it, the Task Scheduler fails with the following error: 0x1: An incorrect function was called or an unknown function was called. The Log.txt (as output from the .bat file above) says: CScript Error: Initialization of the Windows Script Host failed. (Not enough storage is available to process this command. ) But get this: The .bat file executes perfectly (vbs script and all) if it's executed with a double click! There's only a problem when it's run by Task Scheduler. What the hell? We're running Windows Server 2008 R2 (x64) and yes, the Task Sheduler's results are the same whether the user is logged in or not. Also, the user that can run the scripts successfully manually, is also the same user that runs the scripts in Task Scheduler. Thanks for any help for this weird problem!

  Read the article

• Managing per-user rc.d init scripts

  - by Steve Schnepp

  I want to delegate SysV init scripts to each user. Like the SysV init, each item in ${HOME}/rc.d starting with S will be launched on server start-up with the start argument. The same for the server shut-down with the one starting with K and with the stop argument. I thought about scripting it myself, but maybe there is already some kind of implementation out there1. In summary it would be a script in /etc/init.d/ that iterates through all the users and launches runparts as the user on the relevant scripts. The platform here is a Linux (Debian flavour), but I think the solution would be quite portable among various Unix-like platforms. Update: The point here is for users to be able to create their own init scripts that should be launch on their behalf when the system boots up. As Dan Carley pointed out, the services won't be able to access any system asset (priviledged ports, system logs, ...). 1. This way I don't have to think that much about all the subtle security implications such as script timeouts for example...

  Read the article

• Why does my REST request return garbage data?

  - by Alienfluid

  I am trying to use LWP::Simple to make a GET request to a REST service. Here's the simple code: use LWP::Simple; $uri = "http://api.stackoverflow.com/0.8/questions/tagged/php"; $jsonresponse= get $uri; print $jsonresponse; On my local machine, running Ubuntu 10.4, and Perl version 5.10.1: farhan@farhan-lnx:~$ perl --version This is perl, v5.10.1 (*) built for x86_64-linux-gnu-thread-multi I can get the correct response and have it printed on the screen. E.g.: farhan@farhan-lnx:~$ head -10 output.txt { "total": 1000, "page": 1, "pagesize": 30, "questions": [ { "tags": [ "php", "arrays", "coding-style" (... snipped ...) But on my host's machine to which I SSH into, I get garbage printed on the screen for the same exact code. I am assuming it has something to do with the encoding, but the REST service does not return the character set type in the response, so how do I force LWP::Simple to use the correct encoding? Any ideas what may be going on here? Here's the version of Perl on my host's machine: [dredd]$ perl --version This is perl, v5.8.8 built for x86_64-linux-gnu-thread-multi

  Read the article

• How to install DBD::mysql on OS X Server 10.6?

  - by Zoran Simic

  Trying to install DBD::mysql on OS X Server 10.6 (mac mini server). But I'm missing the mysql headers apparently. Since mysql is already part of OS X Server 10.6, I would like to NOT install anything else (no fink or darwin ports installs), just whatever's needed to get DBD::mysql installed and working. Do you know how I could do that? Do I have to install the headers somewhere? And if so, where? (again: I don't want to install another version of mysql on the box, want to use the version it came with). Is there a way to install DBD::mysql without compiling any C files? This is the error I get (the actual error is much longer, but these are the most meaningful bits, this is the first error reported). Checking if your kit is complete... Looks good Unrecognized argument in LIBS ignored: '-pipe' Note (probably harmless): No library found for -lmysqlclient Multiple copies of Driver.xst found in: /Library/Perl/5.10.0/darwin-thread-multi-2level/auto/DBI/ /System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level/auto/DBI/ at Makefile.PL line 907 Using DBI 1.611 (for perl 5.010000 on darwin-thread-multi-2level) installed in /Library/Perl/5.10.0/darwin-thread-multi-2level/auto/DBI/ Writing Makefile for DBD::mysql cp lib/DBD/mysql.pm blib/lib/DBD/mysql.pm cp lib/DBD/mysql/GetInfo.pm blib/lib/DBD/mysql/GetInfo.pm cp lib/DBD/mysql/INSTALL.pod blib/lib/DBD/mysql/INSTALL.pod cp lib/Bundle/DBD/mysql.pm blib/lib/Bundle/DBD/mysql.pm gcc-4.2 -c -I/Library/Perl/5.10.0/darwin-thread-multi-2level/auto/DBI -I/usr/include -fno-omit-frame-pointer -pipe -D_P1003_1B_VISIBLE -DSIGNAL_WITH_VIO_CLOSE -DSIGNALS_DONT_BREAK_READ -DIGNORE_SIGHUP_SIGQUIT -DDBD_MYSQL_INSERT_ID_IS_GOOD -g -arch x86_64 -arch i386 -arch ppc -g -pipe -fno-common -DPERL_DARWIN -fno-strict-aliasing -I/usr/local/include -Os -DVERSION=\"4.014\" -DXS_VERSION=\"4.014\" "-I/System/Library/Perl/5.10.0/darwin-thread-multi-2level/CORE" dbdimp.c In file included from dbdimp.c:20: dbdimp.h:22:49: error: mysql.h: No such file or directory dbdimp.h:23:45: error: mysqld_error.h: No such file or directory dbdimp.h:25:49: error: errmsg.h: No such file or directory

  Read the article

• How to install DBD::mysql on OS X server?

  - by Zoran Simic

  Trying to install DBD::mysql on OS X Server 10.6 (mac mini server). But I'm missing the mysql headers apparently. Since mysql is already part of OS X Server 10.6, I would like to NOT install anything else (no fink or darwin ports installs), just whatever's needed to get DBD::mysql installed and working. Do you know how I could do that? Do I have to install the headers somewhere? And if so, where? (again: I don't want to install another version of mysql on the box, want to use the version it came with). Is there a way to install DBD::mysql without compiling any C files? This is the error I get (the actual error is much longer, but these are the most meaningful bits, this is the first error reported). Checking if your kit is complete... Looks good Unrecognized argument in LIBS ignored: '-pipe' Note (probably harmless): No library found for -lmysqlclient Multiple copies of Driver.xst found in: /Library/Perl/5.10.0/darwin-thread-multi-2level/auto/DBI/ /System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level/auto/DBI/ at Makefile.PL line 907 Using DBI 1.611 (for perl 5.010000 on darwin-thread-multi-2level) installed in /Library/Perl/5.10.0/darwin-thread-multi-2level/auto/DBI/ Writing Makefile for DBD::mysql cp lib/DBD/mysql.pm blib/lib/DBD/mysql.pm cp lib/DBD/mysql/GetInfo.pm blib/lib/DBD/mysql/GetInfo.pm cp lib/DBD/mysql/INSTALL.pod blib/lib/DBD/mysql/INSTALL.pod cp lib/Bundle/DBD/mysql.pm blib/lib/Bundle/DBD/mysql.pm gcc-4.2 -c -I/Library/Perl/5.10.0/darwin-thread-multi-2level/auto/DBI -I/usr/include -fno-omit-frame-pointer -pipe -D_P1003_1B_VISIBLE -DSIGNAL_WITH_VIO_CLOSE -DSIGNALS_DONT_BREAK_READ -DIGNORE_SIGHUP_SIGQUIT -DDBD_MYSQL_INSERT_ID_IS_GOOD -g -arch x86_64 -arch i386 -arch ppc -g -pipe -fno-common -DPERL_DARWIN -fno-strict-aliasing -I/usr/local/include -Os -DVERSION=\"4.014\" -DXS_VERSION=\"4.014\" "-I/System/Library/Perl/5.10.0/darwin-thread-multi-2level/CORE" dbdimp.c In file included from dbdimp.c:20: dbdimp.h:22:49: error: mysql.h: No such file or directory dbdimp.h:23:45: error: mysqld_error.h: No such file or directory dbdimp.h:25:49: error: errmsg.h: No such file or directory

  Read the article

• String Connection Issue

  - by Nano HE

  Hi, Could you please have a look at my code below. #!C:\Perl\bin\perl.exe use strict; use warnings; use Data::Dumper; my $fh = \*DATA; my $str1 = "listBox1.Items.Add(\""; my $str2 = "\")\;"; while(my $line = <$fh>) { $line=~s/^\s+//g; print $str1.$line.$str2; chomp($line); } __DATA__ Hello World Output: D:\learning\perl>test.pl listBox1.Items.Add("Hello ");listBox1.Items.Add("World "); D:\learning\perl> Style error. I want the style below. Is ther anything wrong about my code? thanks. D:\learning\perl>test.pl listBox1.Items.Add("Hello"); listBox1.Items.Add("World"); D:\learning\perl>

  Read the article

• String Concatenation Issue

  - by Nano HE

  Hi, Could you please have a look at my code below. #!C:\Perl\bin\perl.exe use strict; use warnings; use Data::Dumper; my $fh = \*DATA; my $str1 = "listBox1.Items.Add(\""; my $str2 = "\")\;"; while(my $line = <$fh>) { $line=~s/^\s+//g; print $str1.$line.$str2; chomp($line); } __DATA__ Hello World Output: D:\learning\perl>test.pl listBox1.Items.Add("Hello ");listBox1.Items.Add("World "); D:\learning\perl> Style error. I want the style below. Is ther anything wrong about my code? thanks. D:\learning\perl>test.pl listBox1.Items.Add("Hello"); listBox1.Items.Add("World"); D:\learning\perl>

  Read the article

• How do you calculate div and mod of floating point numbers?

  - by boost

  In Perl, the % operator seems to assume integers. For instance: sub foo { my $n1 = shift; my $n2 = shift; print "perl's mod=" . $n1 % $n2, "\n"; my $res = $n1 / $n2; my $t = int($res); print "my div=$t", "\n"; $res = $res - $t; $res = $res * $n2; print "my mod=" . $res . "\n\n"; } foo( 3044.952963, 7.1 ); foo( 3044.952963, -7.1 ); foo( -3044.952963, 7.1 ); foo( -3044.952963, -7.1 ); gives perl's mod=6 my div=428 my mod=6.15296300000033 perl's mod=-1 my div=-428 my mod=6.15296300000033 perl's mod=1 my div=-428 my mod=-6.15296300000033 perl's mod=-6 my div=428 my mod=-6.15296300000033 Now as you can see, I've come up with a "solution" already for calculating div and mod. However, what I don't understand is what effect the sign of each argument should have on the result. Wouldn't the div always be positive, being the number of times n2 fits into n1? How's the arithmetic supposed to work in this situation?

  Read the article

• Install RT Failed: DateTime >= 0.44 ...MISSING

  - by javano

  I am trying to install RT-4.0.5 (Request Tracker) but I keep getting the following output; $ make fixdeps <output cut> SOME DEPENDENCIES WERE MISSING. CORE missing dependencies: DateTime >= 0.44 ...MISSING make: *** [fixdeps] Error 1 The full output is here (it's quite long); http://pastebin.com/raw.php?i=Tn7GrkYw $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 8.04.4 LTS Release: 8.04 Codename: hardy $ perl --version This is perl 5, version 14, subversion 2 (v5.14.2) built for i686-linux $ cpan --version /usr/local/bin/cpan version 1.57 calling Getopt::Std::getopts (version 1.06 [paranoid]), running under Perl version 5.14.2. [Now continuing due to backward compatibility and excessive paranoia. See ``perldoc Getopt::Std'' about $Getopt::Std::STANDARD_HELP_VERSION.] Nothing to install! I can't see why this is a problem; $ cpan DateTime Going to read '/root/.cpan/Metadata' Database was generated on Thu, 08 Mar 2012 16:11:26 GMT DateTime is up to date (0.72).

  Read the article

• Yum Update fails due to conflicting perl packages

  - by amRit

  Hi I have a CentOS 5.2 i386 Production box with Qmail, LAMP etc now since it showed me that it could upgrade to 5.3, i downloaded all the packages using yum update However, the update fails due to perl packages conflicting I believe that while installing Qmail, I had tried for Mailscanner and thus it upgraded the per itself I read somewhere that we can uninstall the conflicting rpms and then go for the upgrade But, I am about 50 % sure that if I go ahead and uninstall perl, my server will crash like a falling house of cards Also, perl is needed by variety of packages working including vpopmail etc Thus, I request anyone to please tell me if we have a safer solution to this IF there is no solution to this, then can somebody please teach me how to backup and restore Qmail as it is. I can handle the rest of the things I sincerely appreciate those who have read and even thought about my problem In anticipation of a solution Regards amRit

  Read the article

• Macports install of ack doesn't create correct executable

  - by user1664196

  I am trying to install p5-app-ack port from Mac Ports, but it seems it doesn't create a /opt/local/bin/ack binary at the end: $ sudo port search *app-ack Password: p5-app-ack @1.960.0 (perl) A grep replacement that ignores .svn/CVS/blib directories p5.8-app-ack @1.960.0 (perl) A grep replacement that ignores .svn/CVS/blib directories p5.10-app-ack @1.960.0 (perl) A grep replacement that ignores .svn/CVS/blib directories p5.12-app-ack @1.960.0 (perl) A grep replacement that ignores .svn/CVS/blib directories p5.14-app-ack @1.960.0 (perl) A grep replacement that ignores .svn/CVS/blib directories p5.16-app-ack @1.960.0 (perl) A grep replacement that ignores .svn/CVS/blib directories Found 6 ports. $ perl --version This is perl 5, version 12, subversion 4 (v5.12.4) built for darwin-thread-multi-2level Copyright 1987-2010, Larry Wall Perl may be copied only under the terms of either the Artistic License or the GNU General Public License, which may be found in the Perl 5 source kit. Complete documentation for Perl, including FAQ lists, should be found on this system using "man perl" or "perldoc perl". If you have access to the Internet, point your browser at http://www.perl.org/, the Perl Home Page. $ sudo port install p5-app-ack ---> Computing dependencies for p5-app-ack ---> Cleaning p5-app-ack ---> Updating database of binaries: 100.0% ---> Scanning binaries for linking errors: 35.0% ---> No broken files found. $ $ ls /opt/local/bin/ac* /opt/local/bin/ack-5.12 /opt/local/bin/aclocal /opt/local/bin/aclocal-1.12 /opt/local/bin/activation-client /opt/local/bin/acyclic $ which ack $ ack -bash: ack: command not found Update If I then try to install p5.12-app-ack afterwards, I get $ sudo port install p5.12-app-ack Password: ---> Computing dependencies for p5.12-app-ack ---> Cleaning p5.12-app-ack ---> Scanning binaries for linking errors: 100.0% ---> No broken files found. $

  Read the article

• running autobench (httperf)

  - by Matthew

  So I ran apt-get install httperf on my system and I can now run httperf. But how can I run 'autobench'? I downloaded the file and unarchived it and if I go in it and run autobench it says -bash command not found I think it's a perl script but if I run perl autobench, it says: root@example:/tmp/autobench-2.1.2# perl autobench Autobench configuration file not found - installing new copy in /root/.autobench.conf cp: cannot stat `/etc/autobench.conf': No such file or directory Installation complete - please rerun autobench Even if I run it again it says the same thing.

  Read the article

• How to install VMWare ESXi CLI on CentOS 6.0?

  - by weekens

  I'm trying to install VMware-vSphere-CLI-5.0.0-422456.x86_64 onto CentOS 6.0 64bit, but the installer complains: CPAN not able to install following Perl modules on the system. These must be installed manually for use by vSphere CLI: UUID 0.03 or newer I tried to do sudo yum install uuid-perl and also sudo yum install perl-SOAP-Lite perl-Data-Dump perl-Class-MethodMaker perl-Crypt-SSLeay perl-libxml-perl perl-XML-LibXML-Common but this doesn't help. What else can I try to do?

  Read the article

• How to parse a CSV file containing serialized PHP? [migrated]

  - by garbetjie

  I've just started dabbling in Perl, to try and gain some exposure to different programming languages - so forgive me if some of the following code is horrendous. I needed a quick and dirty CSV parser that could receive a CSV file, and split it into file batches containing "X" number of CSV lines (taking into account that entries could contain embedded newlines). I came up with a working solution, and it was going along just fine. However, as one of the CSV files that I'm trying to split, I came across one that contains serialized PHP code. This seems to break the CSV parsing. As soon as I remove the serialization - the CSV file is parsed correctly. Are there any tricks I need to know when it comes to parsing serialized data in CSV files? Here is a shortened sample of the code: use strict; use warnings; my $csv = Text::CSV_XS->new({ eol => $/, always_quote => 1, binary => 1 }); my $out; my $in; open $in, "<:encoding(utf8)", "infile.csv" or die("cannot open input file $inputfile"); open $out, ">outfile.000"; binmode($out, ":utf8"); while (my $line = $csv->getline($in)) { $lines++; $csv->print($out, $line); } I'm never able to get into the while loop shown above. As soon as I remove the serialized data, I suddenly am able to get into the loop. Edit: An example of a line that is causing me trouble (taken straight from Vim - hence the ^M): "26","other","1","20,000 Subscriber Plan","Some text here.^M\ Some more text","on","","18","","0","","0","0","recurring","0","","payment","totalsend","0","tsadmin","R34bL9oq","37","0","0","","","","","","","","","","","","","","","","","","","","","","","0","0","0","a:18:{i:0;s:1:\"3\";i:1;s:1:\"2\";i:2;s:2:\"59\";i:3;s:2:\"60\";i:4;s:2:\"61\";i:5;s:2:\"62\";i:6;s:2:\"63\";i:7;s:2:\"64\";i:8;s:2:\"65\";i:9;s:2:\"66\";i:10;s:2:\"67\";i:11;s:2:\"68\";i:12;s:2:\"69\";i:13;s:2:\"70\";i:14;s:2:\"71\";i:15;s:2:\"72\";i:16;s:2:\"73\";i:17;s:2:\"74\";}","","","0","0","","0","0","0.0000","0.0000","0","","","0.00","","6","1" "27","other","1","35,000 Subscriber Plan","Some test here.^M\ Some more text","on","","18","","0","","0","0","recurring","0","","payment","totalsend","0","tsadmin","R34bL9oq","38","0","0","","","","","","","","","","","","","","","","","","","","","","","0","0","0","a:18:{i:0;s:1:\"3\";i:1;s:1:\"2\";i:2;s:2:\"59\";i:3;s:2:\"60\";i:4;s:2:\"61\";i:5;s:2:\"62\";i:6;s:2:\"63\";i:7;s:2:\"64\";i:8;s:2:\"65\";i:9;s:2:\"66\";i:10;s:2:\"67\";i:11;s:2:\"68\";i:12;s:2:\"69\";i:13;s:2:\"70\";i:14;s:2:\"71\";i:15;s:2:\"72\";i:16;s:2:\"73\";i:17;s:2:\"74\";}","","","0","0","","0","0","0.0000","0.0000","0","","","0.00","","7","1" "28","other","1","50,000 Subscriber Plan","Some text here.^M\ Some more text","on","","18","","0","","0","0","recurring","0","","payment","totalsend","0","tsadmin","R34bL9oq","39","0","0","","","","","","","","","","","","","","","","","","","","","","","0","0","0","a:18:{i:0;s:1:\"3\";i:1;s:1:\"2\";i:2;s:2:\"59\";i:3;s:2:\"60\";i:4;s:2:\"61\";i:5;s:2:\"62\";i:6;s:2:\"63\";i:7;s:2:\"64\";i:8;s:2:\"65\";i:9;s:2:\"66\";i:10;s:2:\"67\";i:11;s:2:\"68\";i:12;s:2:\"69\";i:13;s:2:\"70\";i:14;s:2:\"71\";i:15;s:2:\"72\";i:16;s:2:\"73\";i:17;s:2:\"74\";}","","","0","0","","0","0","0.0000","0.0000","0","","","0.00","","8","1""73","other","8","10,000,000","","","","0","","0","","0","0","recurring","0","","payment","","0","","","75","0","10000000","","","","","","","","","","","","","","","","","","","","","","","0","0","0","a:17:{i:0;s:1:\"3\";i:1;s:1:\"2\";i:2;s:2:\"59\";i:3;s:2:\"60\";i:4;s:2:\"61\";i:5;s:2:\"62\";i:6;s:2:\"63\";i:7;s:2:\"64\";i:8;s:2:\"65\";i:9;s:2:\"66\";i:10;s:2:\"67\";i:11;s:2:\"68\";i:12;s:2:\"69\";i:13;s:2:\"70\";i:14;s:2:\"71\";i:15;s:2:\"72\";i:16;s:2:\"74\";}","","","0","0","","0","0","0.0000","0.0000","0","","","0.00","","14","0"

  Read the article

• Moose and error messages, the sun and the moon [closed]

  - by xxxxxxx

  So again using Moose I write a role like this: package My::Role; use Moose::Role; use Some::Class::Consuming::My::Role; With the note that Some::Class::Consuming::My::Role consumes the role My::Role; And what do I get ? I get an error message like this: A role generator is required to generate roles at /usr/local/share/perl/5.10.0/MooseX/Role/Parameterized/Meta/Role/Parameterizable.pm line 79 MooseX::Role::Parameterized::Meta::Role::Parameterizable::generate_role('MooseX::Role::Parameterized::Meta::Role::Parameterizable=HASH...', 'consumer', 'Moose::Meta::Class=HASH(0x894e540)', 'parameters', 'HASH(0x86fc1e0)') called at /usr/local/share/perl/5.10.0/MooseX/Role/Parameterized/Meta/Role/Parameterizable.pm line 116 MooseX::Role::Parameterized::Meta::Role::Parameterizable::apply('MooseX::Role::Parameterized::Meta::Role::Parameterizable=HASH...', 'Moose::Meta::Class=HASH(0x894e540)', 'element_type', 'Tuple') called at /usr/local/lib/perl/5.10.0/Moose/Util.pm line 132 Moose::Util::_apply_all_roles('Moose::Meta::Class=HASH(0x894e540)', undef, 'Stuff', 'HASH(0x894e1d0)') called at /usr/local/lib/perl/5.10.0/Moose/Util.pm line 86 Moose::Util::apply_all_roles('Moose::Meta::Class=HASH(0x894e540)', 'Stuff', 'HASH(0x894e1d0)') called at /usr/local/lib/perl/5.10.0/Moose.pm line 57 Moose::with('Moose::Meta::Class=HASH(0x894e540)', 'Group', 'HASH(0x894e1d0)') called at /usr/local/lib/perl/5.10.0/Moose/Exporter.pm line 293 Moose::with('Group', 'HASH(0x894e1d0)') called at Some_path_on_disk line 6 require Some_other_path_on_disk called at Some_path_on_disk line 9 Group::BEGIN() called at Yet_another_path_on_disk line 0 eval {...} called at Yet_another_path_on_disk line 0 Compilation failed in require at some_path_on_disk line 9. BEGIN failed--compilation aborted at some_path_on_disk line 9. What am I to make of this ? As Dijkstra would concisely describe, this looks like "just a meaningless concatenation of words"(which is exactly what it is). Would a more appropriate error message be "You cannot use a class consuming the role that you are currently defining " ? What does the error message try to convey ? Can the author make the error message meaningful ? Will he ever make it so ? maybe this can be planned for version 3.14159265358979323846 ? In actuality I get one and a half pages of error which is completely unreadable and devoid of any logic or sense of respect for the user that is using Moose (in terms of intuitive error messages) just like the one above. What's to be done in this case ? I mean I get on my screen these error messages that are sometimes completely unrelated to the problem that I'm having (which I can assess after solving the problems that probably caused them, I say probably becuase I have no idea where these error messages came from because they look like they fell from the sky as they have no relation to the actual situation). Is this: the inexplicable dramatic destiny of the Perl programmer using Moose ? someone being extremely lazy and sloppy at writing error messages ? maybe on heavy drugs ? me not understanding basic english ? Gentlemen, when writing software, please please please, take care of the poor programmer that will use it and respect him by writing relevant error messages. (Except for error messages Moose is a pretty good piece of software)

  Read the article

• Why does Module::Build's testcover gives me "use of uninitialized value" warnings?

  - by Kurt W. Leucht

  I'm kinda new to Module::Build, so maybe I did something wrong. Am I the only one who gets warnings when I change my dispatch from "test" to "testcover"? Is there a bug in Devel::Cover? Is there a bug in Module::Build? I probably just did something wrong. I'm using ActiveState Perl v5.10.0 with Module::Build version 0.31012 and Devel::Cover 0.64 and Eclipse 3.4.1 with EPIC 0.6.34 for my IDE. UPDATE: I upgraded to Module::Build 0.34 and the warnings are still output. *UPDATE: Looks like a bug in B::Deparse. Hope it gets fixed someday.* Here's my unit test build file: use strict; use warnings; use Module::Build; my $build = Module::Build->resume ( properties => { config_dir => '_build', }, ); $build->dispatch('test'); When I run this unit test build file, I get the following output: t\MyLib1.......ok t\MyLib2.......ok t\MyLib3.......ok All tests successful. Files=3, Tests=24, 0 wallclock secs ( 0.00 cusr + 0.00 csys = 0.00 CPU) But when I change the dispatch line to 'testcover' I get the following output which always includes a bunch of "use of uninitialized value in bitwise and" warning messages: Deleting database D:/Documents and Settings/<username>/My Documents/<SNIP>/cover_db t\MyLib1.......ok Use of uninitialized value in bitwise and (&) at D:/Perl/lib/B/Deparse.pm line 4252. Use of uninitialized value in bitwise and (&) at D:/Perl/lib/B/Deparse.pm line 4252. t\MyLib2.......ok Use of uninitialized value in bitwise and (&) at D:/Perl/lib/B/Deparse.pm line 4252. Use of uninitialized value in bitwise and (&) at D:/Perl/lib/B/Deparse.pm line 4252. t\MyLib3.......ok Use of uninitialized value in bitwise and (&) at D:/Perl/lib/B/Deparse.pm line 4252. Use of uninitialized value in bitwise and (&) at D:/Perl/lib/B/Deparse.pm line 4252. All tests successful. Files=3, Tests=24, 0 wallclock secs ( 0.00 cusr + 0.00 csys = 0.00 CPU) Reading database from D:/Documents and Settings/<username>/My Documents/<SNIP>/cover_db ---------------------------- ------ ------ ------ ------ ------ ------ ------ File stmt bran cond sub pod time total ---------------------------- ------ ------ ------ ------ ------ ------ ------ .../lib/ActivePerl/Config.pm 0.0 0.0 0.0 0.0 0.0 n/a 0.0 ...l/lib/ActiveState/Path.pm 0.0 0.0 0.0 0.0 100.0 n/a 4.8 <SNIP> blib/lib/<SNIP>/MyLib2.pm 100.0 90.0 n/a 100.0 100.0 0.0 98.5 blib/lib/<SNIP>/MyLib3.pm 100.0 90.9 100.0 100.0 100.0 0.6 98.0 Total 14.4 6.7 3.8 18.3 20.0 100.0 11.6 ---------------------------- ------ ------ ------ ------ ------ ------ ------ Writing HTML output to D:/Documents and Settings/<username>/My Documents/<SNIP>/cover_db/coverage.html ... done.

  Read the article

• How to write a cgi script in perl that accepts output (an image file) from a urlconnection in a Java applet and writes it to the server?

  - by Brad Rock

  I created a Java applet for my web page that creates an image file. I want users to be able to run the applet and create unique images, click a button, and have the image they created be saved to the web server. I think I have the code down for writing the image to a URLconnection in the Java applet itself after having successfully written a file while running the applet on my system rather than the web page and saving a file to the local disk, and then altering a few things to write to a URLConnection instead of to the local disk (although we shall see how that works too). I am now trying to write a cgi script in perl that takes the image output from the URLConnection and writes the image to a file on my web server (note: I am a newbie to perl). I have found many examples of how to do something similar with simple text coming from an applet and then writing it to a text file, but I want to know how to apply the same concept to an image. Particularly, how do I read in the image? I've seen text input get read by using read(STDIN, $some_variable)--does the same thing work with an image? Likewise, how do I write the image file? What function do I use? Thanks for your help. I know that I am rather naive about all of this.

  Read the article

• Cannot Install/Start MySQL Server

  - by Peezy Bro

  Okay, I decided to migrate from MySQL Server 5.5.37 to Percona Server 5.6. I ended up removing MySQL Server by the following: sudo apt-get --purge remove mysql-server mysql-server-5.5 mysql-server-core-5.5 mysql-client mysql-client-core-5.5 mysql-common sudo apt-get autoremove sudo apt-get autoclean rm -rf /var/lib/mysql rm -rf /etc/mysql Now here is my problem, when I try to install MySQL Server 5.6 it goes through its process and when it asks me for a password, it comes up with Cannot set MySQL "root" password. After it "installs" MySQL wont start up and I get permission denied?. Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 35 not upgraded. brandon@brandon-DB:~$ sudo apt-get install mysql-server Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libdbd-mysql-perl libdbi-perl libmysqlclient18 libterm-readkey-perl mysql-client-5.5 mysql-client-core-5.5 mysql-common mysql-server-5.5 mysql-server-core-5.5 Suggested packages: libmldbm-perl libnet-daemon-perl libplrpc-perl libsql-statement-perl tinyca mailx The following NEW packages will be installed: libdbd-mysql-perl libdbi-perl libmysqlclient18 libterm-readkey-perl mysql-client-5.5 mysql-client-core-5.5 mysql-common mysql-server mysql-server-5.5 mysql-server-core-5.5 0 upgraded, 10 newly installed, 0 to remove and 35 not upgraded. Need to get 0 B/8,955 kB of archives. After this operation, 96.3 MB of additional disk space will be used. Do you want to continue? [Y/n] y Preconfiguring packages ... Selecting previously unselected package mysql-common. (Reading database ... 167760 files and directories currently installed.) Preparing to unpack .../mysql-common_5.5.37-0ubuntu0.14.04.1_all.deb ... Unpacking mysql-common (5.5.37-0ubuntu0.14.04.1) ... Selecting previously unselected package libmysqlclient18:amd64. Preparing to unpack .../libmysqlclient18_5.5.37-0ubuntu0.14.04.1_amd64.deb ... Unpacking libmysqlclient18:amd64 (5.5.37-0ubuntu0.14.04.1) ... Selecting previously unselected package libdbi-perl. Preparing to unpack .../libdbi-perl_1.630-1_amd64.deb ... Unpacking libdbi-perl (1.630-1) ... Selecting previously unselected package libdbd-mysql-perl. Preparing to unpack .../libdbd-mysql-perl_4.025-1_amd64.deb ... Unpacking libdbd-mysql-perl (4.025-1) ... Selecting previously unselected package libterm-readkey-perl. Preparing to unpack .../libterm-readkey-perl_2.31-1_amd64.deb ... Unpacking libterm-readkey-perl (2.31-1) ... Selecting previously unselected package mysql-client-core-5.5. Preparing to unpack .../mysql-client-core-5.5_5.5.37-0ubuntu0.14.04.1_amd64.deb ... Unpacking mysql-client-core-5.5 (5.5.37-0ubuntu0.14.04.1) ... Selecting previously unselected package mysql-client-5.5. Preparing to unpack .../mysql-client-5.5_5.5.37-0ubuntu0.14.04.1_amd64.deb ... Unpacking mysql-client-5.5 (5.5.37-0ubuntu0.14.04.1) ... Selecting previously unselected package mysql-server-core-5.5. Preparing to unpack .../mysql-server-core-5.5_5.5.37-0ubuntu0.14.04.1_amd64.deb ... Unpacking mysql-server-core-5.5 (5.5.37-0ubuntu0.14.04.1) ... Processing triggers for man-db (2.6.7.1-1) ... Setting up mysql-common (5.5.37-0ubuntu0.14.04.1) ... Selecting previously unselected package mysql-server-5.5. (Reading database ... 168116 files and directories currently installed.) Preparing to unpack .../mysql-server-5.5_5.5.37-0ubuntu0.14.04.1_amd64.deb ... Unpacking mysql-server-5.5 (5.5.37-0ubuntu0.14.04.1) ... Selecting previously unselected package mysql-server. Preparing to unpack .../mysql-server_5.5.37-0ubuntu0.14.04.1_all.deb ... Unpacking mysql-server (5.5.37-0ubuntu0.14.04.1) ... Processing triggers for ureadahead (0.100.0-16) ... Processing triggers for man-db (2.6.7.1-1) ... Setting up libmysqlclient18:amd64 (5.5.37-0ubuntu0.14.04.1) ... Setting up libdbi-perl (1.630-1) ... Setting up libdbd-mysql-perl (4.025-1) ... Setting up libterm-readkey-perl (2.31-1) ... Setting up mysql-client-core-5.5 (5.5.37-0ubuntu0.14.04.1) ... Setting up mysql-client-5.5 (5.5.37-0ubuntu0.14.04.1) ... Setting up mysql-server-core-5.5 (5.5.37-0ubuntu0.14.04.1) ... Setting up mysql-server-5.5 (5.5.37-0ubuntu0.14.04.1) ... start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing package mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: Package mysql-server-5.5 is not configured yet. dpkg: error processing package mysql-server (--configure): dependency problems - leaving unconfigured Processing triggers for libc-bin (2.19-0ubuntu6) ... No apport report written because the error message indicates its a followup error from a previous failure. Processing triggers for ureadahead (0.100.0-16) ... Errors were encountered while processing: mysql-server-5.5 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) I have all my database/tables dumped and on a seperate HDD. This is also a Dev Machine and not my main Production Machine. I also backed up the MySQL_Config and MySQL_Data.

  Read the article

• How do I add child elements to XML using Perl's XML::Twig?

  - by Ninja

  I have the following XML file: <SOURCE_SERVER> <SERVER HOSTNAME="serv1"> <CIFS_SERVICE NETBIOSNAME="serv1"/> </SERVER> <SERVER HOSTNAME="serv2"> </SERVER> <SOURCE_SERVER> Now, I want to add child <CIFS_SERVICE NETBIOSNAME="serv2"/> to <SERVER HOSTNAME="serv2">. How do I do this using XML::Twig?

  Read the article

• How do I implement a dispatch table in a Perl OO module?

  - by Iain

  I want to put some subs that are within an OO package into an array - also within the package - to use as a dispatch table. Something like this package Blah::Blah; use fields 'tests'; sub new { my($class )= @_; my $self = fields::new($class); $self->{'tests'} = [ $self->_sub1 ,$self->_sub2 ]; return $self; } _sub1 { ... }; _sub2 { ... }; I'm not entirely sure on the syntax for this? $self->{'tests'} = [ $self->_sub1 ,$self->_sub2 ]; or $self->{'tests'} = [ \&{$self->_sub1} ,\&{$self->_sub2} ]; or $self->{'tests'} = [ \&{_sub1} ,\&{_sub2} ]; I don't seem to be able to get this to work within an OO package, whereas it's quite straightforward in a procedural fashion, and I haven't found any examples for OO. Any help is much appreciated, Iain

  Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >