Search Results

Search found 2565 results on 103 pages for 'reduce'.

Page 73/103 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

  • How to configure mod_proxy_balancer to gracefully fail under high load

    - by bramp
    We have a system which has one Apache instance in front of multiple tomcats. These tomcats then connect to various databases. We balance the load to the tomcat with mod_proxy_balancer. Currently we are receiving 100 requests a second, the load on the Apache server is quite low, but due to database heavy operations on the tomcats, the load there is roughly 25% (of what I estimate they can handle). In a few weeks there is an event happening and we estimate that our requests will jump significant, maybe by a factor of 10. I'm doing everything I can do reduce the load on our tomcats, but I know we are going to run out of capacity, so I would like to fail gracefully. By this I mean, instead of trying to deal with too many connections which all timeout, I would like Apache to somehow monitor average response time, and as soon as the response time to Tomcat is getting above some threshold, I would like a error page displayed. This means that users who are lucky still get a page rendered quickly, and those who are unlucky get a error page quickly. Instead of everyone waiting far too long for their page, and eventually everyone timing out, and the database being swamped with queries which are never used. Hopefully this makes sense, so I was looking for suggestions on how I could achieve this. thanks

    Read the article

  • SQL Server Backup modes, and a huge log file

    - by Matt Dawdy
    Okay, I'm not a server administrator, a network guy, or a DBA. I'm merely a programmer helping out a small company. They have IT guy who isn't MS centric (most stuff is on Mac) and he and I are trying to figure out a solution here. We've got 1 main database. We run nightly full backups. I know they are full backups because I can take the latest file, or any of the daily backups, and go to a completely new machine and "restore" the backup to an empty database and our app runs perfectly fine off of this backup. The backups have grown from 60 MB to 250MB over 4 months. When running, then log file is 1.7 GB, and the data file is only 200-300 MB. Yes, recovery model is set to full. So, my question, after all of that, if we are keeping daily backups, and we don't have the need / aren't smart enough to roll the DB back to a certain time, if I change the recovery mode to simple, am I really losing anything? And, if I do change it to simple, will it completely dump the log file or at least reduce it way the hell down? And, will that make our database run faster? I know that it'll make my life easier when I copy a relatively recent backup to my local machine to do development and testing...

    Read the article

  • ffmpeg: converting an avi to a reduced, shareable flv/mp4...

    - by meder
    I recently followed a guide and recompiled my ffmpeg so x264 is enabled. I used some generic settings to convert my 700 MB avi file to a mp4 file, the result was a 407MB mp4 file. The original avi file's settings: Codec: DX50 Resolution: 704x304 Frame rate: 23.976023 Stream 1 Codec: mpga Type: Audio Channels: 2 Sample rate: 48000 Hz Bitrate 179 kb/s Command I used: ffmpeg -i input.avi -acodec libfaac -ab 128k -ac 2 -vcodec libx264 -vpre hq -crf 22 -threads 0 output.mp4 The settings of the output file (output.mp4): Codec: avc1 Resolution: 704x304 Display resolution: 704x304 Frame rate: 11.988011 Stream 1 Codec: mp4a Type: Audio Channels: 2 Sample Rate: 48000 Hz Bits per sample: 16 Bitrate: 1536 kb/s The quality of the output mp4 is pretty nice, it seems as if it's pretty much the same as the original source. However, I'm trying to reduce the filesize and I'm not really sure whether I should go with an flv format or keep it mp4. The advantage the flv would have obviously is that it would be playable with a flash player ( I have come across some swf players which take a flash parameter to play an flv file ).. but maybe I could use the video element, as I'm only going to be displaying this video privately so I don't have to worry about supporting legacy browsers such as IE. Can someone recommend some settings to specify in order for the filesize to be around ~100-150MB or so? I don't mind a reduction in quality, nor do I mind resizing it - I was going to do it initially but I wasn't sure what the guidelines were ( if any ) for dealing with resolution.. since this video's is 704x304 would it still be ok if I forced it into one that isn't perfectly fit for the aspect ratio? I have no clue about that part. I realize that I could have probably specified 28 instead of 22 for the CRF, I'm not sure if I should do that as opposed to maybe specifying smaller resolution, which might make it smaller as well?

    Read the article

  • Why do messenger keeps coming up when I adjust screen brightness?

    - by Asaf R
    My Dell Studio XPS 13 has a brightness up & down buttons (Fn + up arrow / down arrow), as do most laptops have. It's running Windows 7 64bit and I've installed Windows Live Messenger (build 14 and something) on it. When I hit Fn + down arrow, to reduce screen brightness, the Messenger window pops up. That's true whether it has been running in background (system tray / minimized) before or not. Note, to make messenger hide itself to the system tray, I've set it to Vista Compatibility mode. I don't think that has anything to do with it though, since if I shut compatibility mode off, the problem persists. There's a thread on the matter here, but with no solution. Thanks, Asaf SOLUTION: Stop Intellitype when using internal keyboard. See detailed howto here. EDIT: Some new findings on the matter - If I exit messenger entirely and restart (or simply stop) the service "Windows Live ID Sign-in Assistant" the problem is solved until I run messenger again. It persists even after entirely closing messenger, until I restart the said service. EDIT2: The above service "Windows Live ID Sign-in Assistant" actual name is wlidsvc. There's no shortcut defined for messenger, nor is there any other hot key in its preferences. EDIT3: I'm not sure if it's relates, but some of the Fn keys are not working - Fn + F1 doesn't put the machine to sleep, Fn + F3 doesn't show battery status. EDIT4: Problem probably relates to conflict with IntelliType Pro. See my answer below. Said conflict also causes Undo command when disabling Wireless (Wireless touch button), and other side effects for various keys.

    Read the article

  • Real benefits of tcp TIME-WAIT and implications in production environment

    - by user64204
    SOME THEORY I've been doing some reading on tcp TIME-WAIT (here and there) and what I read is that it's a value set to 2 x MSL (maximum segment life) which keeps a connection in the "connection table" for a while to guarantee that, "before your allowed to create a connection with the same tuple, all the packets belonging to previous incarnations of that tuple will be dead". Since segments received (apart from SYN under specific circumstances) while a connection is either in TIME-WAIT or no longer existing would be discarded, why not close the connection right away? Q1: Is it because there is less processing involved in dealing with segments from old connections and less processing to create a new connection on the same tuple when in TIME-WAIT (i.e. are there performance benefits)? If the above explanation doesn't stand, the only reason I see the TIME-WAIT being useful would be if a client sends a SYN for a connection before it sends remaining segments for an old connection on the same tuple in which case the receiver would re-open the connection but then get bad segments and and would have to terminate it. Q2: Is this analysis correct? Q3: Are there other benefits to using TIME-WAIT? SOME PRACTICE I've been looking at the munin graphs on a production server that I administrate. Here is one: As you can see there are more connections in TIME-WAIT than ESTABLISHED, around twice as many most of the time, on some occasions four times as many. Q4: Does this have an impact on performance? Q5: If so, is it wise/recommended to reduce the TIME-WAIT value (and what to)? Q6: Is this ratio of TIME-WAIT / ESTABLISHED connections normal? Could this be related to malicious connection attempts?

    Read the article

  • Excluding files from web logs

    - by Ray
    I originally tried this question on StackOverflow, but it was suggested that serverfault was a better choice. So, here it is... Looking through my web logs, I see a lot of entries that don't interest me. Some of them are commonly used images, css files, and scripts, which I can easily exclude by un-checking the 'log visits' check box in IIS for the folder properties. I would also like to exclude log entries for certain common requests which are not in their own folders. Mostly, 'favicon.ico'. 'scriptresource.axd', and 'webresource.axd'. These (especially scriptresource.axd) make up almost a third of a typical log file on my site. So, the question is, how do I tell IIS not to log these requests? And is there any reason that this is a bad idea? The purpose of doing this is to reduce the log file size and the amount of work the server has to do, to make the log file more manageable when I need to dig in to them for troubleshooting, and for my own curiosity. I realize that log file parsers can skip the junk, but I am interested in reducing the raw files, before parsing.

    Read the article

  • How many reverse proxies (nginx, haproxy) is too many?

    - by Alysum
    I'm setting up a HA (high availability) cluster using nginx, haproxy & apache. I've been reading great things about nginx and haproxy. People tend to choose one or the other but I like both. Haproxy is more flexible for load balancing than nginx's simple round robin (even with the upstream-fair patch). But I'd like to keep nginx for redirecting non-https to https among other things right at the point of entry to the cluster. On the other hand, nginx is a lot faster for serving static contents and would reduce the load on the powerful apache which loves to eat a lot of RAM! Here is my planned setup: Load balancer: nginx listens on port 80/443 and proxy_forwards to haproxy on 8080 on the same server to load balance between the multiple nodes. Nodes: nginx on the node listens to requests coming from haproxy on 8080, if the content is static, serve it. But if it's a backend script (in my case PHP), proxy forward to apache2 on the same node server listenning on a different port number. Technically this setup works but my concerns are whether having the requests going through several proxies is going to slow down requests? Most of the requests will be PHP requests as the backends are services (which means groing from nginx - haproxy - nginx - apache). Thoughts? Cheers

    Read the article

  • How to configure mod_proxy_balancer to gracefully fail under high load

    - by bramp
    We have a system which has one Apache instance in front of multiple tomcats. These tomcats then connect to various databases. We balance the load to the tomcat with mod_proxy_balancer. Currently we are receiving 100 requests a second, the load on the Apache server is quite low, but due to database heavy operations on the tomcats, the load there is roughly 25% (of what I estimate they can handle). In a few weeks there is an event happening and we estimate that our requests will jump significant, maybe by a factor of 10. I'm doing everything I can do reduce the load on our tomcats, but I know we are going to run out of capacity, so I would like to fail gracefully. By this I mean, instead of trying to deal with too many connections which all timeout, I would like Apache to somehow monitor average response time, and as soon as the response time to Tomcat is getting above some threshold, I would like a error page displayed. This means that users who are lucky still get a page rendered quickly, and those who are unlucky get a error page quickly. Instead of everyone waiting far too long for their page, and eventually everyone timing out, and the database being swamped with queries which are never used. Hopefully this makes sense, so I was looking for suggestions on how I could achieve this. thanks

    Read the article

  • Disaster recovery backup of files/photos for personal use

    - by Renesis
    I'm looking for the best method to store a backup of important files and 5+ years of digital photos that is safe from some type of fire/flood disaster in my home. I'm looking for: Affordable: Less than $100/yr or first-time cost. Reliable: At least a smaller chance of failing than there is of fire or flood Easy for initial backup and to add to, and at least semi-easy to recover. I recently purchased a small home safe for physical vitals. It was inexpensive, solid, and is fire/water safe. If I had a physical copy of the digital files, the safe would work fine for this, but I don't know what to store in it that adequately meets the requirements above. Hard drive - I read that the danger of it not spinning up makes a hard drive a bad choice for this type of storage, although it was my first thought and would definitely be the simplest choice - very easy to take out once a month and add files to. DVDs - Way too much of a hassle for both backup and restore. Tape - No idea on the affordability of this option Online - Given that I have at least 300GB already and ever-increasing megapixels means ever-bigger files, and my ISP upload is about 2Mb at the best, this just doesn't sound like a good option for me, but I could be convinced. Other - Have I missed something? Also, I'm already covered both for sync between computers (Dropbox) and a nightly backup of these files (External HDD). The problem with the nightly backup is obviously that it's always with the computer and in a disaster would be destroyed along with it. Is anyone else doing something similar? Is the HDD as poor of a choice as I read, or is it a feasible option? Maybe two to reduce the likelihood of failure?

    Read the article

  • Screen Flickering: Hardware or Software?

    - by Wesley
    I have a Samsung N120 netbook (upgraded to 2GB DDR2 RAM) and there has been a screen flickering issue for some time now. However, I have not been able to accurately determine whether it is a software or hardware issue. Here are some of the symptoms: The flicker is white-colored and shows up as vertical lines. Flickering or not, there may be occasionally some random blue patterns (no image distortion) The screen tends to flicker more when the screen is not tilted back all the way. When tilting the screen back and forth, the screen will usually flicker. Some images on the screen may randomly distort without full-on flickering. The screen will flicker only on certain websites, but not on others. A certain part of a webpage may constantly be distorted randomly, even when scrolling. While flickering, the mouse will not move though I'm moving my finger along the touchpad. A connected external monitor does not have any problems. The flickering is completely random and does not seem to follow any CPU/GPU usage trends. Flickering usually gets worse when the screen brightness is turned higher. There will be flickering on battery and while plugged in. Search up "Samsung N120 - Screen Flickering" on YouTube for an idea of what the flickering looks like. However, there is no visible distortions and the flickering seems to stop when the screen has dimmed. Since the problems started, I tried formatting and using Windows 7, then formatted again and went back to Windows XP. The screen was also replaced sometime during this past summer. The uninstallation of the Samsung Battery Manager (on the original install of XP) seemed to reduce the flicker partially, but eventually got worse. So, what could possibly be the problem?

    Read the article

  • Unable to force Debian to do unattended install... libc6 wants interactive confirm

    - by JD Long
    I'm trying to create a script that forces a Debian Lenny install to install the latest version of CRAN R. During the install it appears libc6 is upgraded and the install wants interactive confirm that it's OK to restart three services (mysql, exim4, cron). This process HAS to be unattended as it runs on Amazon's Elastic Map Reduce (EMR) machines. But I'm running out of options. Here's a few things I've tried: This previous question appears to be exactly what I'm looking for. So I set up my install script as follows: # set my CRAN repos... yes, I know there's a new convention where to put these. echo "deb http://cran.r-project.org/bin/linux/debian lenny-cran/" | sudo tee -a /etc/apt/sources.list echo "deb-src http://cran.r-project.org/bin/linux/debian lenny-cran/" | sudo tee -a /etc/apt/sources.list # set the dpkg.cfg options per the previous SuperUser question echo "force-confold" | sudo tee -a /etc/dpkg/dpkg.cfg echo "force-confdef" | sudo tee -a /etc/dpkg/dpkg.cfg export DEBIAN_FRONTEND=noninteractive # add key to keyring so it doesn't complain gpg --keyserver pgp.mit.edu --recv-key 381BA480 gpg -a --export 381BA480 > jranke_cran.asc sudo apt-key add jranke_cran.asc sudo apt-get update # install the latest R sudo apt-get install --yes --force-yes r-base But this script hangs with the following request for input: OK, so I tried stopping the services using the following script: sudo /etc/init.d/mysql stop sudo /etc/init.d/exim4 stop sudo /etc/init.d/cron stop sudo apt-get install --yes --force-yes libc6 This does not work and the interactive screen comes back, but this time with only cron listed as the service that must be restarted. So is there a way to make libc6 just restart these services with no user input? Or is there a way to stop cron so it does not cause an interactive prompt? Maybe a creative option I've never thought of? Keep in mind that this system is brought up, some Hadoop code is run, and then it's torn down. So I can put up with side effects and bad behavior that we might not want in a production desktop machine or web server.

    Read the article

  • hdfs configuration

    - by Ananymous
    I am a newbie. Trying to setup a hdfs system to serve my data (I don't plan to use mapreduce) at my lab. So far I have read, cluster setup in but I am still confused. Several questions: Do I need to have a secondary namenode? There are 2 files, masters and slaves. Do I really need these 2 files eventhough I just want hdfs? If I need them, what should go in there? I assume my namenode in masters and datanodes as slaves? Do I need slaves nodes What configuration files are needed for namenode, secondary namenode, datanode and client? (I assume core-site.xml is needed for all 4)? In addition, can someone suggest a good configuration model? sample configuration for namenode, secondary namenode, datanode, and the client would be very helpful. I am getting confused because it seems most of the documentation assumes I want to use map-reduce which isn't the case.

    Read the article

  • What Is The Proper Laptop Battery Care While Running Laptop Solely On Battery?

    - by Boris_yo
    Because of convenience, I had to move my laptop to another room away from room where I always ran laptop on UPS without using battery. Since so far I always run laptop on battery, I question the proper usage to prolong battery life. Currently I run laptop on battery with power supply so battery is constantly being charged until it is full 100% and when it is, I disconnect power supply and continue working until battery meter shows 10% remaining. That's when I plug in power supply and let it charge until 100% once again while I work. But it takes a lot of time to fully charge laptop while working since my power supply is 60W which should be the reason of such slow charge and I think the kind of charger that I use is express charger. The thought of charging laptop until full, all while doing my work makes me think that if it takes way more time to charge, it might keep battery running warm for the period of charging time which brings me to question about whether I should keep running laptop as I've described above or it would be better to leave power supply constantly connected to laptop to keep battery between 99%-100%? On one hand it won't keep battery warm but it will try to frequently supply charge to battery once it gets 99% to replenish charge to 100% (which might reduce battery life?). On the other hand if I'll keep working solely on battery and recharge it when below 10%, the battery will get warm but only when charged. Can anybody suggest the correct way of running laptop on battery to ensure better battery life? Dell Latitude E6420 Windows 7 64-bit

    Read the article

  • Are there any disadvantages of having a "free fall sensor" on a hard disk drive?

    - by therobyouknow
    This is a general question that came out of a specific comparison between the Western Digital Scorpio WD3200BEKT and Western Digital Scorpio WD3200BJKT (which is the same as the former but with a free fall sensor.) Note: I'm not asking for a review or appraisal of these specific drives, as the general question does apply on other brands as well. Though your input would help my decision. To break down the general question in order to answer it, I would be looking for comments on things like: if it's necessary to have differing physical dimensions between free fall sensor drives and those without, e.g. does it make it any thicker, and therefore reduce the systems where it can be installed - particularly smaller laptops? does it actually make the system less reliable - because of false alarms whereby the drive thought the laptop was falling but it wasn't? I suppose that the fact that a manufacturer produces both drives with and without free fall sensors says something about possible disadvantages. Or it could be standard marketing techniques where by making drives with and without results in larger sales volume than just those with the feature alone.

    Read the article

  • BackupExec 2012 File System Archiving - Access is denied to Remote Agent

    - by AllisZero
    Gentlemen, I've been struggling with a Trial version of Symantec Backup Exec 2012 for about a week now. It was installed as an upgrade to our 12.5 license, and the setup completed with no issues. The reason I upgraded is solely for the File System Archiving option as I'm working to reduce the amount of live data in my servers. Backups work A-Ok and I have followed the instructions in the Admin Manual to make sure I had filled all requirements. The account BE is running under is a member of the Local administrators group as required and has been added to the test share that I'm using to evaluate the archiving function. Testing the credentials in the job setup window always works fine, and I am able to add both regular and Admin$ shares to my Archive selection. However, every time I run the Archive job, I get the following message: https://dl.dropbox.com/u/59540229/BEXec.png I've already tried to troubleshoot DNS resolution issues as suggested in the Symantec KB to no avail. The only thing I can think of, at this point, is that a trial license doesn't allow me to use the Archiving function, although that would seem silly on their part. Appreciate any assistance or information. Thanks.

    Read the article

  • Unusually high dentry cache usage

    - by Wolfgang Stengel
    Problem A CentOS machine with kernel 2.6.32 and 128 GB physical RAM ran into trouble a few days ago. The responsible system administrator tells me that the PHP-FPM application was not responding to requests in a timely manner anymore due to swapping, and having seen in free that almost no memory was left, he chose to reboot the machine. I know that free memory can be a confusing concept on Linux and a reboot perhaps was the wrong thing to do. However, the mentioned administrator blames the PHP application (which I am responsible for) and refuses to investigate further. What I could find out on my own is this: Before the restart, the free memory (incl. buffers and cache) was only a couple of hundred MB. Before the restart, /proc/meminfo reported a Slab memory usage of around 90 GB (yes, GB). After the restart, the free memory was 119 GB, going down to around 100 GB within an hour, as the PHP-FPM workers (about 600 of them) were coming back to life, each of them showing between 30 and 40 MB in the RES column in top (which has been this way for months and is perfectly reasonable given the nature of the PHP application). There is nothing else in the process list that consumes an unusual or noteworthy amount of RAM. After the restart, Slab memory was around 300 MB If have been monitoring the system ever since, and most notably the Slab memory is increasing in a straight line with a rate of about 5 GB per day. Free memory as reported by free and /proc/meminfo decreases at the same rate. Slab is currently at 46 GB. According to slabtop most of it is used for dentry entries: Free memory: free -m total used free shared buffers cached Mem: 129048 76435 52612 0 144 7675 -/+ buffers/cache: 68615 60432 Swap: 8191 0 8191 Meminfo: cat /proc/meminfo MemTotal: 132145324 kB MemFree: 53620068 kB Buffers: 147760 kB Cached: 8239072 kB SwapCached: 0 kB Active: 20300940 kB Inactive: 6512716 kB Active(anon): 18408460 kB Inactive(anon): 24736 kB Active(file): 1892480 kB Inactive(file): 6487980 kB Unevictable: 8608 kB Mlocked: 8608 kB SwapTotal: 8388600 kB SwapFree: 8388600 kB Dirty: 11416 kB Writeback: 0 kB AnonPages: 18436224 kB Mapped: 94536 kB Shmem: 6364 kB Slab: 46240380 kB SReclaimable: 44561644 kB SUnreclaim: 1678736 kB KernelStack: 9336 kB PageTables: 457516 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 72364108 kB Committed_AS: 22305444 kB VmallocTotal: 34359738367 kB VmallocUsed: 480164 kB VmallocChunk: 34290830848 kB HardwareCorrupted: 0 kB AnonHugePages: 12216320 kB HugePages_Total: 2048 HugePages_Free: 2048 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 5604 kB DirectMap2M: 2078720 kB DirectMap1G: 132120576 kB Slabtop: slabtop --once Active / Total Objects (% used) : 225920064 / 226193412 (99.9%) Active / Total Slabs (% used) : 11556364 / 11556415 (100.0%) Active / Total Caches (% used) : 110 / 194 (56.7%) Active / Total Size (% used) : 43278793.73K / 43315465.42K (99.9%) Minimum / Average / Maximum Object : 0.02K / 0.19K / 4096.00K OBJS ACTIVE USE OBJ SIZE SLABS OBJ/SLAB CACHE SIZE NAME 221416340 221416039 3% 0.19K 11070817 20 44283268K dentry 1123443 1122739 99% 0.41K 124827 9 499308K fuse_request 1122320 1122180 99% 0.75K 224464 5 897856K fuse_inode 761539 754272 99% 0.20K 40081 19 160324K vm_area_struct 437858 223259 50% 0.10K 11834 37 47336K buffer_head 353353 347519 98% 0.05K 4589 77 18356K anon_vma_chain 325090 324190 99% 0.06K 5510 59 22040K size-64 146272 145422 99% 0.03K 1306 112 5224K size-32 137625 137614 99% 1.02K 45875 3 183500K nfs_inode_cache 128800 118407 91% 0.04K 1400 92 5600K anon_vma 59101 46853 79% 0.55K 8443 7 33772K radix_tree_node 52620 52009 98% 0.12K 1754 30 7016K size-128 19359 19253 99% 0.14K 717 27 2868K sysfs_dir_cache 10240 7746 75% 0.19K 512 20 2048K filp VFS cache pressure: cat /proc/sys/vm/vfs_cache_pressure 125 Swappiness: cat /proc/sys/vm/swappiness 0 I know that unused memory is wasted memory, so this should not necessarily be a bad thing (especially given that 44 GB are shown as SReclaimable). However, apparently the machine experienced problems nonetheless, and I'm afraid the same will happen again in a few days when Slab surpasses 90 GB. Questions I have these questions: Am I correct in thinking that the Slab memory is always physical RAM, and the number is already subtracted from the MemFree value? Is such a high number of dentry entries normal? The PHP application has access to around 1.5 M files, however most of them are archives and not being accessed at all for regular web traffic. What could be an explanation for the fact that the number of cached inodes is much lower than the number of cached dentries, should they not be related somehow? If the system runs into memory trouble, should the kernel not free some of the dentries automatically? What could be a reason that this does not happen? Is there any way to "look into" the dentry cache to see what all this memory is (i.e. what are the paths that are being cached)? Perhaps this points to some kind of memory leak, symlink loop, or indeed to something the PHP application is doing wrong. The PHP application code as well as all asset files are mounted via GlusterFS network file system, could that have something to do with it? Please keep in mind that I can not investigate as root, only as a regular user, and that the administrator refuses to help. He won't even run the typical echo 2 > /proc/sys/vm/drop_caches test to see if the Slab memory is indeed reclaimable. Any insights into what could be going on and how I can investigate any further would be greatly appreciated. Updates Some further diagnostic information: Mounts: cat /proc/self/mounts rootfs / rootfs rw 0 0 proc /proc proc rw,relatime 0 0 sysfs /sys sysfs rw,relatime 0 0 devtmpfs /dev devtmpfs rw,relatime,size=66063000k,nr_inodes=16515750,mode=755 0 0 devpts /dev/pts devpts rw,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /dev/shm tmpfs rw,relatime 0 0 /dev/mapper/sysvg-lv_root / ext4 rw,relatime,barrier=1,data=ordered 0 0 /proc/bus/usb /proc/bus/usb usbfs rw,relatime 0 0 /dev/sda1 /boot ext4 rw,relatime,barrier=1,data=ordered 0 0 tmpfs /phptmp tmpfs rw,noatime,size=1048576k,nr_inodes=15728640,mode=777 0 0 tmpfs /wsdltmp tmpfs rw,noatime,size=1048576k,nr_inodes=15728640,mode=777 0 0 none /proc/sys/fs/binfmt_misc binfmt_misc rw,relatime 0 0 cgroup /cgroup/cpuset cgroup rw,relatime,cpuset 0 0 cgroup /cgroup/cpu cgroup rw,relatime,cpu 0 0 cgroup /cgroup/cpuacct cgroup rw,relatime,cpuacct 0 0 cgroup /cgroup/memory cgroup rw,relatime,memory 0 0 cgroup /cgroup/devices cgroup rw,relatime,devices 0 0 cgroup /cgroup/freezer cgroup rw,relatime,freezer 0 0 cgroup /cgroup/net_cls cgroup rw,relatime,net_cls 0 0 cgroup /cgroup/blkio cgroup rw,relatime,blkio 0 0 /etc/glusterfs/glusterfs-www.vol /var/www fuse.glusterfs rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072 0 0 /etc/glusterfs/glusterfs-upload.vol /var/upload fuse.glusterfs rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072 0 0 sunrpc /var/lib/nfs/rpc_pipefs rpc_pipefs rw,relatime 0 0 172.17.39.78:/www /data/www nfs rw,relatime,vers=3,rsize=65536,wsize=65536,namlen=255,hard,proto=tcp,port=38467,timeo=600,retrans=2,sec=sys,mountaddr=172.17.39.78,mountvers=3,mountport=38465,mountproto=tcp,local_lock=none,addr=172.17.39.78 0 0 Mount info: cat /proc/self/mountinfo 16 21 0:3 / /proc rw,relatime - proc proc rw 17 21 0:0 / /sys rw,relatime - sysfs sysfs rw 18 21 0:5 / /dev rw,relatime - devtmpfs devtmpfs rw,size=66063000k,nr_inodes=16515750,mode=755 19 18 0:11 / /dev/pts rw,relatime - devpts devpts rw,gid=5,mode=620,ptmxmode=000 20 18 0:16 / /dev/shm rw,relatime - tmpfs tmpfs rw 21 1 253:1 / / rw,relatime - ext4 /dev/mapper/sysvg-lv_root rw,barrier=1,data=ordered 22 16 0:15 / /proc/bus/usb rw,relatime - usbfs /proc/bus/usb rw 23 21 8:1 / /boot rw,relatime - ext4 /dev/sda1 rw,barrier=1,data=ordered 24 21 0:17 / /phptmp rw,noatime - tmpfs tmpfs rw,size=1048576k,nr_inodes=15728640,mode=777 25 21 0:18 / /wsdltmp rw,noatime - tmpfs tmpfs rw,size=1048576k,nr_inodes=15728640,mode=777 26 16 0:19 / /proc/sys/fs/binfmt_misc rw,relatime - binfmt_misc none rw 27 21 0:20 / /cgroup/cpuset rw,relatime - cgroup cgroup rw,cpuset 28 21 0:21 / /cgroup/cpu rw,relatime - cgroup cgroup rw,cpu 29 21 0:22 / /cgroup/cpuacct rw,relatime - cgroup cgroup rw,cpuacct 30 21 0:23 / /cgroup/memory rw,relatime - cgroup cgroup rw,memory 31 21 0:24 / /cgroup/devices rw,relatime - cgroup cgroup rw,devices 32 21 0:25 / /cgroup/freezer rw,relatime - cgroup cgroup rw,freezer 33 21 0:26 / /cgroup/net_cls rw,relatime - cgroup cgroup rw,net_cls 34 21 0:27 / /cgroup/blkio rw,relatime - cgroup cgroup rw,blkio 35 21 0:28 / /var/www rw,relatime - fuse.glusterfs /etc/glusterfs/glusterfs-www.vol rw,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072 36 21 0:29 / /var/upload rw,relatime - fuse.glusterfs /etc/glusterfs/glusterfs-upload.vol rw,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072 37 21 0:30 / /var/lib/nfs/rpc_pipefs rw,relatime - rpc_pipefs sunrpc rw 39 21 0:31 / /data/www rw,relatime - nfs 172.17.39.78:/www rw,vers=3,rsize=65536,wsize=65536,namlen=255,hard,proto=tcp,port=38467,timeo=600,retrans=2,sec=sys,mountaddr=172.17.39.78,mountvers=3,mountport=38465,mountproto=tcp,local_lock=none,addr=172.17.39.78 GlusterFS config: cat /etc/glusterfs/glusterfs-www.vol volume remote1 type protocol/client option transport-type tcp option remote-host 172.17.39.71 option ping-timeout 10 option transport.socket.nodelay on # undocumented option for speed # http://gluster.org/pipermail/gluster-users/2009-September/003158.html option remote-subvolume /data/www end-volume volume remote2 type protocol/client option transport-type tcp option remote-host 172.17.39.72 option ping-timeout 10 option transport.socket.nodelay on # undocumented option for speed # http://gluster.org/pipermail/gluster-users/2009-September/003158.html option remote-subvolume /data/www end-volume volume remote3 type protocol/client option transport-type tcp option remote-host 172.17.39.73 option ping-timeout 10 option transport.socket.nodelay on # undocumented option for speed # http://gluster.org/pipermail/gluster-users/2009-September/003158.html option remote-subvolume /data/www end-volume volume remote4 type protocol/client option transport-type tcp option remote-host 172.17.39.74 option ping-timeout 10 option transport.socket.nodelay on # undocumented option for speed # http://gluster.org/pipermail/gluster-users/2009-September/003158.html option remote-subvolume /data/www end-volume volume replicate1 type cluster/replicate option lookup-unhashed off # off will reduce cpu usage, and network option local-volume-name 'hostname' subvolumes remote1 remote2 end-volume volume replicate2 type cluster/replicate option lookup-unhashed off # off will reduce cpu usage, and network option local-volume-name 'hostname' subvolumes remote3 remote4 end-volume volume distribute type cluster/distribute subvolumes replicate1 replicate2 end-volume volume iocache type performance/io-cache option cache-size 8192MB # default is 32MB subvolumes distribute end-volume volume writeback type performance/write-behind option cache-size 1024MB option window-size 1MB subvolumes iocache end-volume ### Add io-threads for parallel requisitions volume iothreads type performance/io-threads option thread-count 64 # default is 16 subvolumes writeback end-volume volume ra type performance/read-ahead option page-size 2MB option page-count 16 option force-atime-update no subvolumes iothreads end-volume

    Read the article

  • A lots of Apache processes are using my CPU uses always more than 70%

    - by Barkat Ullah
    I am running a plesk panel in 1and1. I have 120 sites running and all are using pligg cms, each site has 600 visitors per day. Please see the details of my server below: HDD-1000GB RAM-16GB Processor-6 Core I always see a lot of apache processes running in my # top view, so the server seems overloaded. If I can reduce the amount apache processes I think the server will be ok. But I don't know why too many apache processes are running. Please see the link below for the screenshot of my # top view: http://dl.dropbox.com/u/26967109/%23Top-2.jpg Sometimes I saw too many connection error in my plesk control panel, so I added the below line in my [mysqld] section: set-variable=max_connections=416 But I didn't find a solution yet. I have also added maxclients and serverlimit 416 in the config /etc/httpd/conf/httpd.conf But no solution yet. I am researching around more than 7 days but don't get any solution. Please help me to solve the problem. In peak hours my sites are taking too much time to load, but off-peak hour it is ok. Please help me to find out the actual problem.

    Read the article

  • Barriers to IPv6 deployment: addressing

    - by sysadmin1138
    There are several things that are keeping IPv6 deployment from being a topic of active discussion here at my work. There are the usual technical issues, but one non-technical one appears to be a major stumbling block on the path to actually getting a deployment project going. Addresses, memorizing of. Specifically, IPv4 addresses are comprehensible, and IPv6 addresses just look like a big long string of hex. The human mind has real trouble memorizing lists of more than 7-8 items, and an IPv4 address (192.168.231.148) has four items in it which makes it easy for us to memorize. A fully populated IPv6 address has not only 8 sections, but each section has 4 hex digits in it. IPv6 addresses were not designed for memorization. To the technician who knows that the DNS server is at 192.168.42.42 (or more likely "42.42", since the company prefix is likely memorized), the idea of memorizing an IPv6 address fills them with dread. Which in turn makes them much less enthusiastic about participating in an IPv6 deployment project. Because of how our network works we're not fully dynamic in terms of v4 addressing. We have several to many subnets that are entirely statically assigned for a variety of reasons, chief among them being that the overhead of static DHCP assignments is perceived as being too great. Also, some devices still aren't smart enough to pull DNS addresses out of DHCP while also having a static assignment, and therefore require manually configured DNS settings. Therefore, some v6 address memorization will have to be done. We're not under any mandate to get v6 out the door, so we don't have pressure from the top. However, it is time to start prepping our infrastructure to handle IPv6 even if we don't convert wholesale. For those of you who have been in IPv6-land for a while, what short-cut methods do you use to discuss or keep track of subnets and specific/critical IP addresses? If I can help reduce some of the dread surrounding IPv6 we might get the project going.

    Read the article

  • Why is MySQL table_cache full but never used

    - by Jeremy Clarke
    I have been using the tuning-primer.sh script to tune my my.cnf settings. I have most things working well but the part about TABLE CACHE makes no sense: TABLE CACHE Current table_cache value = 900 tables. You have a total of 0 tables You have 900 open tables. Current table_cache hit rate is 1% , while 100% of your table cache is in use. You should probably increase your table_cache When I do SHOW STATUS; I get the following table-related numbers: Open_tables = 900 Opened_tables = 0 It seems like something is going wrong. I have some extra memory I could use on increasing the table_cache size, but my sense is that the 900 tables already available aren't doing anything, and increasing it will just waste more energy. Why might this be happening? Are there other settings that could cause all my table_cache slots to be used even though there are no hits to them? I have 150 max connections and probably no more than 4 tables per join, FWIW. Here is the tuner script output for temp tables, which I've also been tuning: TEMP TABLES Current max_heap_table_size = 90 M Current tmp_table_size = 90 M Of 11032358 temp tables, 40% were created on disk Perhaps you should increase your tmp_table_size and/or max_heap_table_size to reduce the number of disk-based temporary tables. Note! BLOB and TEXT columns are not allow in memory tables. If you are using these columns raising these values might not impact your ratio of on disk temp tables.

    Read the article

  • ffmpeg cutting video duration

    - by Steve Spence
    When using ffmpeg on linux, my 4.3GB 2.21 second video is being chopped down to 1.56 duration. I'm trying to reduce file size, but not lose frames. steve@steve-OptiPlex-170L:~/Desktop$ ffmpeg -i microbe.avi microbe.mp4 ffmpeg version 0.8.3-4:0.8.3-0ubuntu0.12.04.1, Copyright (c) 2000-2012 the Libav developers built on Jun 12 2012 16:37:58 with gcc 4.6.3 * THIS PROGRAM IS DEPRECATED * This program is only provided for compatibility and will be removed in a future release. Please use avconv instead. Input #0, avi, from 'microbe.avi': Duration: 00:02:21.80, start: 0.000000, bitrate: 242311 kb/s Stream #0.0: Video: rawvideo, bgr24, 1280x960, 10 tbr, 10 tbn, 10 tbc Incompatible pixel format 'bgr24' for codec 'mpeg4', auto-selecting format 'yuv420p' [buffer @ 0x9f861e0] w:1280 h:960 pixfmt:bgr24 [avsink @ 0x9f86440] auto-inserting filter 'auto-inserted scaler 0' between the filter 'src' and the filter 'out' [scale @ 0x9f7d800] w:1280 h:960 fmt:bgr24 - w:1280 h:960 fmt:yuv420p flags:0x4 Output #0, mp4, to 'microbe.mp4': Metadata: encoder : Lavf53.21.0 Stream #0.0: Video: mpeg4, yuv420p, 1280x960, q=2-31, 200 kb/s, 10 tbn, 10 tbc Stream mapping: Stream #0.0 - #0.0 Press ctrl-c to stop encoding frame= 1164 fps= 6 q=31.0 Lsize= 3775kB time=116.40 bitrate= 265.7kbits/s video:3765kB audio:0kB global headers:0kB muxing overhead 0.272870% steve@steve-OptiPlex-170L:~/Desktop$

    Read the article

  • Limiting bandwith on an Windows 7 machine

    - by Mihai Damian
    I need to limit the bandwidth on my Windows 7 x64 machine. In the past (on XP) I've been able to use NetLimiter for similar tasks. However for some reason I can't get it to work anymore. For lower limits the bandwidth tests are able to exceed the limit by 10-50%; higher limits seem to be ignored completely and the bandwidth tests report download speeds of over 10 times the speed I set. I'm using speedtest.net and some similar service from my ISP for these tests. Anyway, I don't necessarily need a program as complex as NetLimiter since I only need to throttle my machine's bandwidth, not a specific program's. In case you are wondering why in the world I'd want to cripple my Internet speed, there is a funny story behind this. Long story short, my modem gets random disconnects. Tech support comes in, says my Internet speed is abnormally high and I must be using some tools to somehow make it go faster than it's supposed to and this messes up my modem. I check the connection with another computer and it seems that my PC is the only one in my network that gets abnormal speeds. I reinstall my OS, speed looks normal at first, after I install the batch of 50 or so updates, it goes back to abnormally high speeds and the disconnect problems are not solved. Now I don't have a clue if the explanation the tech team gave me was just a strategy to lay the blame on someone else, but I was trying to give them the benefit of the doubt and see what happens if I really reduce my speed to their specification. Any help appreciated.

    Read the article

  • central apache log analysis of many hosts

    - by Jason Antman
    We have 30+ apache httpd servers, and are looking to perform analysis on the logs both for historical trending and near "real time" monitoring/alerting. I'm mainly interested in things like error rates (4xx/5xx), response time, overall request rate, etc. but it would also be very useful to pull out more compute-intensive statistics like unique client IPs and user agents per unit of time. I'm leaning towards building this as a centralized collector/server/storage, and am also considering the possibility of storing non-apache logs (i.e. general syslog, firewall logs, etc.) in the same system. Obviously a large part of this will probably have to be custom (at least the connection between pieces and the parsing/analysis we do), but I haven't been able to find much information on people who have done stuff like this, at least at shops smaller than Google/Facebook/etc. who can throw their log data into a hundred-node compute cluster and run Map/Reduce on it. The main things I'm looking for are: - All open source - Some way of collecting logs from apache machines that isn't too resource-intensive, and transports them relatively quickly over the network - Some way of storing them (NoSQL? key-value store?) on the backend, for a given amount of time (and then rolling them up into historical averages) - In the middle of this, a way of graphing in near-real-time (probably also with some statistical analysis on it) and hopefully alerting off of those graphs. Any suggestions/pointers/ideas, to either "products"/projects or descriptions of how other people do this would be greatly helpful. Unfortunately, we're not exactly a new-age-y devops shop, lots of old stuff, homogeneous infrastructure, and strained boxes.

    Read the article

  • What format should I convert my iTunes Videos to?

    - by Aequitarum Custos
    Recently got Daniusoft Media Converter, and was about to strip the DRM off my iTunes library, then I found I had a huge decision to make. Converting my music seems obvious, to MP3, however the video formats, I'm at a loss on. It has "optimized" formats for all types of video players such as iPhone, Zune, Droid (which I own), and just a huge list! I bought several seasons of House and a few movies, though I don't know which format would be optimal to not lose quality. While I love my Droid, I have no intention on watching full episodes or movies on it, and I have a feeling that would reduce quality. One of the options sections is HD Video, and it has HD MPEG-4 Video (*.mp4). That one seems like it would be the best format to convert to without losing quality, but again, I'm unsure. Has anyone used this software, or have general expertise in video formats to give a recommendation on what file format I should convert my videos to? Format requirements: No loss in quality Portability would be ideal (as in, will play on my Windows and potentially MAC, and streamable to a bigscreen).

    Read the article

  • G4 server running slow

    - by Abby Kach
    I have HP proliant ML 350 servers. We have 8 remote locations where users connect and log on to our server through DYNDNS to access our company ERP's to conduct day to day work. The base of our company ERP's is oracle for which we have a separate server.Now the problem is day by day the load on the server is increasing and the speed is getting slower and slower and users are facing a lot of issues . so I are planning to implement Sonic wall VPN. I conducted a demo of sonic wall but it was slower than the current speed of dyndns. the configuration of my server is as follows :- Linux HP ProLiant 370 Intel Xenon 3.20 GHZ 150 GB (72 * 2) 3 GB Suse Omega HP ProLiant 370 Intel Xenon 3.20 GHZ 300GB (72.8 * 4) Raid 5 4 GB Windows Server 2K3 Enterprise Edition Storage Box HP Storage Works 1400 Intel Xenon 2.00 GHZ 4 TB(1 TB * 4) Raid 5 2 GB Windows Server 2K8 Enterprise Edition Domain & Terminal HP ProLiant 350 Intel Xenon 3.20 GHZ 250 GB(72.8 * 3) Raid 5 4 GB Windows Server 2K3 Enterprise Edition Can some one help me as to how can i speed up my network at remote locations and reduce the problems of speed etc..

    Read the article

  • How can I totally flatten a PDF in Mac OS on the command line?

    - by Matthew Leingang
    I use Mac OS X Snow Leopard. I have a PDF with form fields, annotations, and stamps on it. I would like to freeze (or "flatten") that PDF so that the form fields can't be changed and the annotations/stamps are no longer editable. Since I actually have many of these PDFs, I want to do this automatically on the command line. Some things I've tried/considered, with their degree of success: Open in Preview and Print to File. This creates a totally flat PDF without changing the file size. The only way to automate seems to be to write a kludgy UI-based AppleScript, though, which I've been trying to avoid. Open in Acrobat Pro and use a JavaScript function to flatten. Again, not sure how to automate this on the command line. Use pdftk with the flatten option. But this only flattens form fields, not stamps and other annotations. Use cupsfilter which can create PDF from many file formats. Like pdftk this flattened only the form fields. Use cups-pdf to hook into the Mac's printserver and save a PDF file instead of print. I used the macports version. The resulting file is flat but huge. I tried this on an 8MB file; the flattened PDF was 358MB! Perhaps this can be combined with a ghostscript call as in Ubuntu Tip:Howto reduce PDF file size from command line. Any other suggestions would be appreciated.

    Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >