Search Results

Search found 13360 results on 535 pages for 'xubuntu 11 04'.

Page 73/535 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

• USB hard drive not recognized

  - by user318772

  Until recently I was using the portable USB hard drive in my win 7 laptop and ubuntu laptop. Suddenly now none of the laptops recognize it. This is the message i get by doing lsusb... Bus 001 Device 004: ID 1058:1010 Western Digital Technologies, Inc. Elements External HDD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 003 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub fdisk doesn't show the external hard drive Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004a743 Device Boot Start End Blocks Id System /dev/sda1 * 2048 152111103 76054528 83 Linux /dev/sda2 152113150 156301311 2094081 5 Extended /dev/sda5 152113152 156301311 2094080 82 Linux swap / Solaris when i do testdisk TestDisk 6.14, Data Recovery Utility, July 2013 Christophe GRENIER <[email protected]> http://www.cgsecurity.org TestDisk is free software, and comes with ABSOLUTELY NO WARRANTY. Select a media (use Arrow keys, then press Enter): >Disk /dev/sda - 80 GB / 74 GiB - ST980825AS Disk /dev/sdb - 2199 GB / 2048 GiB testdisk-> Intel->analyse I get partition error Disk /dev/sdb - 2199 GB / 2048 GiB - CHS 2097152 64 32 Current partition structure: Partition Start End Size in sectors Partition: Read error Here is the output of dmesg [11948.549171] Add. Sense: Invalid command operation code [11948.549177] sd 2:0:0:0: [sdb] CDB: [11948.549181] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.550489] sd 2:0:0:0: [sdb] Invalid command failure [11948.550495] sd 2:0:0:0: [sdb] [11948.550499] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.550505] sd 2:0:0:0: [sdb] [11948.550508] Sense Key : Illegal Request [current] [11948.550514] Info fld=0x0 [11948.550519] sd 2:0:0:0: [sdb] [11948.550525] Add. Sense: Invalid command operation code [11948.550531] sd 2:0:0:0: [sdb] CDB: [11948.550534] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.551870] sd 2:0:0:0: [sdb] Invalid command failure [11948.551876] sd 2:0:0:0: [sdb] [11948.551880] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.551885] sd 2:0:0:0: [sdb] [11948.551888] Sense Key : Illegal Request [current] [11948.551895] Info fld=0x0 [11948.551900] sd 2:0:0:0: [sdb] [11948.551905] Add. Sense: Invalid command operation code [11948.551911] sd 2:0:0:0: [sdb] CDB: [11948.551914] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 If possible i want to retrive at least some data from this hard drive. If thats not possible I would like to format it and use it. Any help will be greatly appreciated Thanks

  Read the article

• ImageMagick convert to png32, can't change background at all

  - by Doug

  So I'm stumped. I've been wrestling with this simple command to turn an SVG file into a transparent SVG to no avail. Here's my command convert svg:/home/media/svgTest.svg -quality 100 -background none -size 3300x3300 png32:/home/media/pngTest.png The PNG comes out fine, but the background is white. Upon further investigation - the PNG's background is white no matter what I set the -background option to. I've tried black, tomato4, and even various hex colors. Nothing - just white. My SVG has no background fill layer or anything like that, it's just a couple of blue path layers. Also, I am running ImageMagick v 6.6.9-7 on Ubuntu 12.04 Lts What am I doing wrong? Thanks

  Read the article

• Access a windows dynamic hard drive through a virtual machine on ubuntu?

  - by Enigma

  I have a Windows 7 OS and am thinking about transitioning to a dual boot set up with Ubuntu 12.04. From what I recall, it is not possible to natively access Dynamic Windows Partitions in a Linux OS. My thought is that it might be possible to have a virtual machine (running windows) installed within Ubuntu access the physical dynamic drive. The problem comes to whether VMWare can access the physical disk "high enough" to be able to mount it within the windows virtual machine as a native device or if it gets passed through from the native Linux OS. This is really the only thing holding me back from switching to a dual-boot set up as the dynamic disk is made up of 4 or 5 hard drives and I would very much like access to the data on both OS's. Alternatively, is there another solution for combining multiple physical hard drives into one virtual hard drive that would be readable on both OS's?

  Read the article

• Ubuntu 11.04 fresh install - "Input signal out of range" or "Mode not supported..."

  - by Dennis

  I recently installed Ubuntu 11.04 using a CD .iso. Installation went fine. Upon completion I rebooted and after a second or two I got a black screen with the message "Input signal out of range". And there it sits... Read a few things about how this could be related to screen resolution, refresh rate, etc. For the heck of it I tried a different monitor. The result is the same but the message provides some clues - "Mode not supported - H:92.7kHz, V:58.3Hz" (the latter is Hz; not kHz). So my thought is that I should probably be able to use the 11.04 install disc to "Try out Ubuntu", find and edit some file that was created by the install with the correct values. Problem is, I am not too sure what I am supposed to edit. Looked at the xorg.conf file but this is so minimal at this point I am not sure it is where I want to go. By the way, the monitor is an I-Inc ix191a. Anyone have any ideas on how to get around this?

  Read the article

• How to make mounted external drive writable over SFTP

  - by Brandon

  I have a user that I log in with over SFTP to my Ubuntu box. They have permission to write to the home directory of course. The external hard drive gets mounted to /media folder but I can't write to it over SFTP while logged in with that user. How would I set the permissions to allow me to write to the drive?

  Read the article

• Ubuntu + LigHTTPd: Server requests taking ages

  - by ctrl_freak

  I've had an issue since upgrading my distro a couple of weeks ago from hardy; receiving data after making a request has increasing intervals of nothing, as you can see from the picture below. http://i49.tinypic.com/2w5lvr9.png I have since reinstalled fresh from an Ubuntu 10.04 Server (i386) disk, but am still having the same issues. I'm running on a LigHTTPd, MySQL, PHP5 stack. The surprising thing is, that local browsing using lynx is super fast, as expected. Initially, after reinstalling, I copied over the old configuration files from the previous installation, but have since reinstalled LigHTTPd and rebuilt the config file from scratch. The only correlation I could find, was that I attempted installation of ionCube and Zend Optimizer for a script I was testing, however I would think that it could no longer impact seeing I had reinstalled the OS. I have also removed Suhosin just in case, however it had no impact. I'm thinking it possibly has something to do with networking, but I wouldn't know where to start. The server is manually assigned an IP by it's MAC address on the router. The fact that the time seems to be exponential (to a point) worries me. I've tried strace'ing the LigHTTPd and MySQL processes, however I couldn't see anything obvious, not that I'd really know what I'm looking for. RAM and CPU usage don't seem to be out of the ordinary, but I can't say its perfect.. I'm hoping someone has experienced the same, or can point me in a direction, as searching has proved fruitless as I don't know anything specific. Config files can be posted, if requested.

  Read the article

• My VPS ubuntu server is very slow

  - by askmike

  I just installed a frech copy of Ubuntu 12.04 on my vps because my old installation was very slow, unfortunately this did not fix the problem. With slow I mean requests for my PHP websites take a long time, very slow (30 sec per request) to slow (3+ sec per request). When it's really bad SSH is also laggish. The websites are: askmike.org (pretty standard Wordpress) mvr.me (own PHP) slow? very slow: Here is a picture of loading a clean install of wordpress slow: here is a picture of loading a small PHP based website the vps The VPS has 256mb ram and an 25GB hdd. Besides serving the 2 small websites it isn't doing anything AFAIK. What have I installed Clean Ubuntu server 12.04 LAMP stack few things like git and nodejs (not using both) ossec (because I thought my server was getting hammered) munin What I already tried / done I installed munin so that I could watch io speed and such. The problem is that I don't know where to look for in the munin report. I checked logs and don't see anything strange (although I don't really know where to look for besides strange / repetitive errors and GET requests). I configured Apache MPM to: <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 40 MaxRequestsPerChild 0 </IfModule> (apache is using prefork, the default) Stats I copied the munin report as it appeared at 4:50 last night to a site hosted on a shared webhost. Note that tonight my mysql crashed somewhere after 1:00 (which is a new problem altogether), so therefor the graph for last night might look strange. Can anyone help me get my VPS up to normal speed? EDIT: Thanks for the replies. The VPS is 10 bucks a month and is from directvps.nl (Dutch host and I'm also dutch). I did two speed tests for disk IO: $ dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync 1073741824 bytes (1.1 GB) copied, 23.1506 s, 46.4 MB/s $ dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync 1073741824 bytes (1.1 GB) copied, 39.3796 s, 27.3 MB/s Anyway: how can I prove to my VPS host that it is to slow? I can understand a server being busy slowing a website down. But 5-30 sec loadtime for a normal PHP webpage?

  Read the article

• Execute script before shutting down in Ubuntu

  - by juanefren

  When I shut down my computer I want to show some pending tasks that I have to do before leaving the office... I did a local application to manage those tasks, so basically I just want to run a command, and shut down after I kill the app executed. I have already tried with these options: * /etc/gdm/PostSession/Default -- this works only when I select LogOut option instead Shutdown. * /etc/rc0.d/K01mycustomscript -- execute script after X is killed * $HOME/.bash_logout -- This looks like does nothing. * ./app-to-run && sudo shutdown -h now -- Don't like it for 2 reasons, prompts for sudo password, and can't use my laptop shutdown button. I am using Ubuntu 10.04

  Read the article

• VirtualBox with Ubuntu Server guest can't ping outside

  - by Danidan

  Here's my situation: an Ubuntu 12.04 Host running VirtualBox; two guest VMs running Ubuntu Server 12.04 home network, so my Host pc has a wireless connection to the router of my ISP. My problem is in one of the virtual machines: it has 3 NICs, one in NAT mode and the others in Host Only mode. My purpose is to use eth0 (NAT) for Internet access and eth1, eth2 (Host Only) for management of internal virtual network (eth1 uses a VBoxNet with this IP 192.168.69.254). Whenever I try to $ping 8.8.8.8 I get Destination Host Unreachable. While if I $ping 192.168.69.10, that is the IP of the other VM, it works. I can't also ping my Host nor my router My /etc/network/interfaces file is: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 192.168.69.1 netmask 255.255.255.0 auto eth2 iface ifconfig $IFACE 0.0.0.0 up up ip link set $IFACE promisc on down ip link set $IFASE promisc off down ifconfig $IFACE down $route -n returns: Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.0.2.2 0.0.0.0 UG 100 0 0 eth0 10.0.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.69.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 Forgetting for now what eth2 needs to do and its setup, why I can't go outside the Host box? What can I do to help you helping me? :-)

  Read the article

• Apache2 403 permission denied on Ubuntu 12.04

  - by skeniver

  I have a sub-directory in my /var/www folder called prod, which is password protected. It was all working fine until I asked my server admin to help me set up allow all access to one particular file. Now the entire folder is just giving me a 403 error. This is the sites-enabled file: <VirtualHost *:80> ServerAdmin [email protected] # Server name ServerName prod.xxx.co.uk DocumentRoot /var/www/prod <Directory /var/www/prod> Options Indexes FollowSymLinks MultiViews +ExecCGI Includes AllowOverride None Order allow,deny AuthType Basic AuthName "Please log in" AuthUserFile /home/ubuntu/.htpasswd Require valid-user </Directory> <Directory /var/www/prod/xxx/cgi-bin/api.pl> Allow from All Satisfy Any </Directory> ScriptAlias /xxx/cgi-bin/ /var/www/prod/xxx/cgi-bin/ ErrorLog ${APACHE_LOG_DIR}/prod.xxx.error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/prod.xxx.access.log combined </VirtualHost> Now he's unsure why this is blocking me out completely. No permissions have been changed, but this is the /var/www/ folder: 4 drwxr-xr-x 2 root root 4096 Jan 3 21:10 images 4 drwxr-sr-x 4 root www-data 4096 Mar 31 14:47 jslib 4 drwxr-xr-x 7 root root 4096 Jun 2 13:00 prod When I try to visit http://prod.xxx.co.uk, I don't get asked for the password; I just get 403'd I hope I've given enough information... Anyone able to spot something he can't?

  Read the article

• Synergy configuration with multiple X screens

  - by Rob Drimmie

  I'm having a problem figuring out how to configure synergy to behave on a system with multiple X windows. On my desktop I am running Ubuntu 10.04 LTS. I have two monitors, setup as separate X screens by preference as well as to enable me to rotate the left-hand monitor. I also have a laptop, which I have on the desk in front of me, lower than the other two monitors. I have a very simple synergy.conf: section: screens desktop: laptop.local: end section: links desktop: down = laptop laptop: up = desktop end It works, but on the desktop only on whichever screen I run synergys from in terminal (I haven't set it up to run at startup yet because I've been playing with the configuration). I can't find any information how to reference multiple screens on one system, and would appreciate any help.

  Read the article

• Installing Hyper-V Integration Components on Linux

  - by Lance Fisher

  Some big news this week was Microsoft released the Hyper-V integration components for Linux source code under the GPL v2. I just installed Ubuntu Server 9.04 in a Hyper-V VM with a Legacy Network Adapter. How do I install the integration components? Do I have to wait until they are included in the kernel?

  Read the article

• Why are application folders going in usr/share instead of home folder?

  - by person

  For example, when I do something like... sudo apt-get install vim It creates a vim folder in usr/share, even though I expect a .vim folder to be created in the home folder.

  Read the article

• Passenger/Rails not releasing memory

  - by michaeldelorenzo

  I have an Ubuntu server running three separate Rails (2.3.8) applications with Passenger, REE and Apache. Recently we started experiencing problems with ruby processes eating up memory and consuming entire cores on our server. Here's what we're getting... %CPU PID USER COMMAND 99.9 1717 nobody Rails: /var/www/api 99.6 5542 nobody Rails: /var/www/api 97.3 1223 nobody Rails: /var/www/api 4.7 5537 nobody Passenger ApplicationSpawner: /var/www/api 10.5 1801 nobody Rails: /var/www/api We've also seen instances where there have been over 100 instances of Apache running. These applications have been running for a few months without an of these issues, but in the last day or so we've been noticing this. The site referenced here is a Rails application that is a RESTful API so it serves many requests every minute. Any guidance on what we should be checking or looking out for would be appreciated.

  Read the article

• When should I upgrade to Ubuntu 10.04 (Lucid Lynx)? [closed]

  - by Emyr

  I'm a web developer for a small non-IT firm. When 9.10 came out, I was using it with no adverse effects from about a month before release (iirc, first beta), initially as an upgrade but as a clean install later to ensure my system would be consistent with most other 9.10 systems. The last alpha of 10.04 came out last week, with another 2 weeks before beta. I'm quite eager to do it today, but obviously the usual "not for production systems" notice is still in place. When should I upgrade? Do I need to worry about software installed from source? (./configure, make, make install etc) Is the attraction of a non-brown theme really this tempting for you?

  Read the article

• Newly installed ubuntu is very slow

  - by Mirage

  I have just installed ubuntu 10.4 but when i open Firefox it takes lon timeto open and also the sites are runnning very slow. when i click hyperink , it takes long time toopen But the internet and FF is going at very good spedd in thevirtual machine which is inside the ubuntu with window 2008 what can be the reason Any firewall issue

  Read the article

• output redirection not happening completely

  - by Gaurav

  I am running the following command on ubuntu 12.04 bash shell: hping3 -S -p 80 -c 30 www.google.com >> outputfile.txt But the problem is that this leaves some lines in the end and doesn't copy in the file. I even tried hping3 -S -p 80 -c 30 www.google.com >> outputfile.txt 2>&1 It also gives same problem. However this works perfect: ping -c 30 www.google.com >> outputfile.txt Any idea about what I might be missing?

  Read the article

• Write hash password to LDAP when creating a new user

  - by alibaba

  I am working on a project with a central user database system. One of the requirements of the system is that there should be only one set of users for all the application. FreeRADIUS and Samba are two my applications that both use LDAP as their backend. Since users must be the same for the entire system that contains many other applications, I have to read the list of users from the central database and recreate them in the LDAP directories for Samba and FreeRADIUS. The problem is that users are sent to me from another entity and I can save them in the database with their hash passwords. I don't have access to their cleartext passwords. I am wondering if I could enter directly a hash password for a new user in LDAP with my preferred hash mechanism. If not, can any one tell me what strategy I have to use? I am running my server on UBUNTU 12.04 and all other applications are the latest versions. My database system is PostgreSQL 9.2. Thank you

  Read the article

• Ubuntu 12.04: Unable to add or delete a user named 'mysql'

  - by Afaque H

  I am trying to install MySql on Ubuntu 12.04 but the installation is failing with the error: "Can't change to run as user 'mysql'. Check if the user 'mysql' exits." So I go ahead type in the command : 'cat /etc/passwd | grep mysql' and result is null. I try to add a user 'mysql' by issuing the command 'useradd mysql'/. But it fails with the message: 'useradd: user 'mysql' already exists'. When I try to delete the user 'mysql' using the command 'userdel mysql' it also fails with the message "userdel: cannot remove entry 'mysql' from /etc/passwd." Can anyone explain me what's going on and suggest a solution.

  Read the article

• Small font all 'new' messages suddenly in Gmail on Ubuntu in Opera, why?

  - by Michael Durrant

  This seemed to happen out of the blue. I have been using Opera for years. I can't find anywhere in Gmail to change the default font that is used in Opera. Ubuntu is Version 11 Opera is version 11.6 In Firefox the font is normal size. I have tried playing around with both all the browser setting I can find plus Ubuntu system settings (I had seen some mentions of Opera using the system default font sometimes) but no success so far. Really bumming as I have been using Opera for two years and if I can't resolve it I will not be able to use it. I can switch to Firefox but I don't want to.

  Read the article

• What is the difference between the Client and GTK versions of emacs?

  - by David

  My Ubuntu 10.04 desktop has three versions of emacs: emacs-snapshot (client) emacs-snapshot (GTK) GNU Emacs 23 I mostly use emacs-snapshot, but I also use regular emacs in terminal mode emacs -nw. However, it is not clear to me what the difference is between the client and GTK versions of emacs-snapshot is, which one is launched by emacs-snapshot at the terminal, and if I should uninstall one or just ignore it.

  Read the article

• SSL on app - nginx web server

  - by Adam

  I am running an nginx web server where I redirect all http requests to https (with a self signed cert). Here is how I REDIRECT all http requests to https in the nginx config file: server { listen 80 default_server; listen [::]:80 default_server ipv6only=on; server_name my.server.ip; return 301 https://$server_name$request_uri; Problem is - I cannot seem to do so for an app running on a port. Example: http://my.server.ip:1234 does not redirect to https://my.server.ip:1234 ir works fine on all other urls like http://my.server.ip/temp etc. How can I modify the nginx config file to force that app url through ssl?

  Read the article

• Removed Empathy icon from panel, how do I add it back?

  - by riteshmnayak

  I installed Ubuntu 10.04 and got Empathy IM client configured. The icon on the panel next to the clock, n/w was not functioning as expected, so I accidentally removed it from the panel. Now I am unable to see the icon to show my contacts online. How do I add it back to the panel?

  Read the article

• Load on Ubuntu 8.04 LTS high

  - by Paddington

  My Ubuntu 8.04 LTS server periodically has a high load avg spike(once every 2 days) resulting in Apache timing out and virtualy everything even SSH to the server is not possible. When I am on the console and run TOP is see that The load avg increases from less than 1 to above 60 in 15 mins. How can I isolate the cause? top - 09:21:51 up 37 days, 20:18, 6 users, load average: 5.41, 5.53, 5.36 Tasks: 160 total, 2 running, 156 sleeping, 0 stopped, 2 zombie Cpu(s): 65.0%us, 8.8%sy, 0.0%ni, 1.0%id,24.6%wa, 0.3%hi, 0.3%si, 0.0%st Mem: 3989468k total, 3444984k used, 544484k free, 360460k buffers Swap: 11687248k total, 178168k used, 11509080k free, 881772k cached

  Read the article

• init.d service died

  - by jerluc

  Adapting some code from a linux forum, I've added a service script to /etc/init.d on my ubuntu natty server to start/stop/restart node.js It literally was working the first day I made it, but then today, after viewing my website this morning, the server threw a 404, and upon further inspection, the node.js process was gone. So I went to start the service again, only this time, node.js didn't start at all, and ever since I haven't been able to get my service script working. Below is the entire script: #!/bin/sh # # Node Server Startup # case "$1" in start) echo -n "Starting node: " daemon node /usr/local/www/server.js echo touch /var/lock/subsys/node ;; stop) echo -n "Shutting down node: " killall node echo rm -f /var/lock/subsys/node rm -f /var/run/node.pid ;; status) status node ;; restart) $0 stop $0 start ;; reload) echo -n "Reloading node: " killall node -HUP echo ;; *) echo "Usage: $0 {start|stop|restart|reload|status}" exit 1 esac exit 0 Thanks for any help!

  Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >