Search Results

Search found 8983 results on 360 pages for 'active attr'.

Page 74/360 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

• Linux software raid fails to include one device for one RAID1 array

  - by user1389890

  One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64. Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2 --add /dev/sdc1. This works fine, and mdadm confirms that the device has been re-added as follows: mdadm: re-added /dev/sdc1 After adding the device and and allowing the array time to resynch, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdc1[0] sdd1[1] 732574464 blocks [2/2] [UU] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> Then after I reboot, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdd1[1] 732574464 blocks [2/1] [_U] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> During reboot, here is the output of $ sudo cat /var/log/syslog | grep mdadm : Jun 22 19:00:08 rook mdadm[1709]: RebuildFinished event detected on md device /dev/md2 Jun 22 19:00:08 rook mdadm[1709]: SpareActive event detected on md device /dev/md2, component device /dev/sdc1 Jun 22 19:00:20 rook kernel: [ 7819.446412] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446415] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446782] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446785] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515844] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515847] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606829] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606832] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855616] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855620] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855950] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855952] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962169] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962171] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054365] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054368] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588662] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588664] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601990] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601991] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602693] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602695] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605981] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605983] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606138] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606139] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:48 rook mdadm[1737]: DegradedArray event detected on md device /dev/md2 Here is the mdadm.conf file: ARRAY /dev/md0 metadata=0.90 UUID=92121d42:37f46b82:926983e9:7d8aad9b ARRAY /dev/md1 metadata=0.90 UUID=9c1bafc3:1762d51d:c1ae3c29:66348110 ARRAY /dev/md2 metadata=0.90 UUID=98cea6ca:25b5f305:49e8ec88:e84bc7f0 ARRAY /dev/md3 metadata=1.2 name=rook:3 UUID=ca3fce37:95d49a09:badd0ddc:b63a4792 I also ran $ sudo smartctl -t long /dev/sdc and no hardware issues were detected. As long as I do not reboot, /dev/md2 seems to work fine. Does anyone have any suggestions? Here is the output of $ sudo mdadm -E /dev/sdc1 after re-adding the device and letting it resync: /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Array Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 5fd6cc13 - correct Events : 180998 Number Major Minor RaidDevice State this 0 8 33 0 active sync /dev/sdc1 0 0 8 33 0 active sync /dev/sdc1 1 1 8 49 1 active sync /dev/sdd1 Here is the output of $ sudo mdadm -D /dev/md2 after re-adding the device and letting it resync: /dev/md2: Version : 0.90 Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Array Size : 732574464 (698.64 GiB 750.16 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Events : 0.180998 Number Major Minor RaidDevice State 0 8 33 0 active sync /dev/sdc1 1 8 49 1 active sync /dev/sdd1

  Read the article

• Upon reboot, Linux software raid fails to include one device of a RAID1 array

  - by user1389890

  One of my four Linux software raid arrays drops one of its two devices when I reboot my system. The other three arrays work fine. I am running RAID1 on kernel version 2.6.32-5-amd64 (Debian Squeeze). Every time I reboot, /dev/md2 comes up with only one device. I can manually add the device by saying $ sudo mdadm /dev/md2 --add /dev/sdc1. This works fine, and mdadm confirms that the device has been re-added as follows: mdadm: re-added /dev/sdc1 After adding the device and allowing the array time to resynch, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdc1[0] sdd1[1] 732574464 blocks [2/2] [UU] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> Then after I reboot, this is what the output of $ cat /proc/mdstat looks like: Personalities : [raid1] md3 : active raid1 sda4[0] sdb4[1] 244186840 blocks super 1.2 [2/2] [UU] md2 : active raid1 sdd1[1] 732574464 blocks [2/1] [_U] md1 : active raid1 sda3[0] sdb3[1] 722804416 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 6835520 blocks [2/2] [UU] unused devices: <none> During reboot, here is the output of $ sudo cat /var/log/syslog | grep mdadm : Jun 22 19:00:08 rook mdadm[1709]: RebuildFinished event detected on md device /dev/md2 Jun 22 19:00:08 rook mdadm[1709]: SpareActive event detected on md device /dev/md2, component device /dev/sdc1 Jun 22 19:00:20 rook kernel: [ 7819.446412] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446415] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446782] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.446785] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515844] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.515847] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606829] mdadm: sending ioctl 1261 to a partition! Jun 22 19:00:20 rook kernel: [ 7819.606832] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855616] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855620] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855950] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:48 rook kernel: [ 8027.855952] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962169] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8027.962171] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054365] mdadm: sending ioctl 1261 to a partition! Jun 22 19:03:49 rook kernel: [ 8028.054368] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588662] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.588664] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601990] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.601991] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602693] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.602695] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605981] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.605983] mdadm: sending ioctl 1261 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606138] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:23 rook kernel: [ 9.606139] mdadm: sending ioctl 800c0910 to a partition! Jun 22 19:10:48 rook mdadm[1737]: DegradedArray event detected on md device /dev/md2 Here is the result of $ cat /etc/mdadm/mdadm.conf: ARRAY /dev/md0 metadata=0.90 UUID=92121d42:37f46b82:926983e9:7d8aad9b ARRAY /dev/md1 metadata=0.90 UUID=9c1bafc3:1762d51d:c1ae3c29:66348110 ARRAY /dev/md2 metadata=0.90 UUID=98cea6ca:25b5f305:49e8ec88:e84bc7f0 ARRAY /dev/md3 metadata=1.2 name=rook:3 UUID=ca3fce37:95d49a09:badd0ddc:b63a4792 Here is the output of $ sudo mdadm -E /dev/sdc1 after re-adding the device and letting it resync: /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Array Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : 5fd6cc13 - correct Events : 180998 Number Major Minor RaidDevice State this 0 8 33 0 active sync /dev/sdc1 0 0 8 33 0 active sync /dev/sdc1 1 1 8 49 1 active sync /dev/sdd1 Here is the output of $ sudo mdadm -D /dev/md2 after re-adding the device and letting it resync: /dev/md2: Version : 0.90 Creation Time : Sun Jul 13 08:05:55 2008 Raid Level : raid1 Array Size : 732574464 (698.64 GiB 750.16 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon Jun 24 07:42:49 2013 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 98cea6ca:25b5f305:49e8ec88:e84bc7f0 (local to host rook) Events : 0.180998 Number Major Minor RaidDevice State 0 8 33 0 active sync /dev/sdc1 1 8 49 1 active sync /dev/sdd1 I also ran $ sudo smartctl -t long /dev/sdc and no hardware issues were detected. As long as I do not reboot, /dev/md2 seems to work fine. Does anyone have any suggestions?

  Read the article

• Auto-Selecting Navigation works for active page but how to add class to parent menu items?

  - by jacqueschoquette

  I am following this article http://docs.jquery.com/Tutorials:Auto-Selecting_Navigation I am able to successfully add a class to the active page li menu item but does anyone know how to modify or add to this script so that any parent menu li items also get the active class? I would like to avoid having to add ID's as the menu items will be changing alot My menus have three levels max here is the script jquery script i am using $(function(){ var path = location.pathname.substring(1); if ( path ) $('.topLevel a[href$="' + path + '"]').attr('class', 'underline'); }); which works on the current page li a I thought I could go this route $('.topLevel a[href$="' + path + '"]').attr('class', 'underline').parent().attr('class', 'underline'); but it does not seem to work any ideas? a working example can be found here whistlerwebandprint.com/home.html

  Read the article

• linux raid 1: right after replacing and syncing one drive, the other disk fails - understanding what is going on with mdstat/mdadm

  - by devicerandom

  We have an old RAID 1 Linux server (Ubuntu Lucid 10.04), with four partitions. A few days ago /dev/sdb failed, and today we noticed /dev/sda had pre-failure ominous SMART signs (~4000 reallocated sector count). We replaced /dev/sdb this morning and rebuilt the RAID on the new drive, following this guide: http://www.howtoforge.com/replacing_hard_disks_in_a_raid1_array Everything went smooth until the very end. When it looked like it was finishing to synchronize the last partition, the other old one failed. At this point I am very unsure of the state of the system. Everything seems working and the files seem to be all accessible, just as if it synchronized everything, but I'm new to RAID and I'm worried about what is going on. The /proc/mdstat output is: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md3 : active raid1 sdb4[2](S) sda4[0] 478713792 blocks [2/1] [U_] md2 : active raid1 sdb3[1] sda3[2](F) 244140992 blocks [2/1] [_U] md1 : active raid1 sdb2[1] sda2[2](F) 244140992 blocks [2/1] [_U] md0 : active raid1 sdb1[1] sda1[2](F) 9764800 blocks [2/1] [_U] unused devices: <none> The order of [_U] vs [U_]. Why aren't they consistent along all the array? Is the first U /dev/sda or /dev/sdb? (I tried looking on the web for this trivial information but I found no explicit indication) If I read correctly for md0, [_U] should be /dev/sda1 (down) and /dev/sdb1 (up). But if /dev/sda has failed, how can it be the opposite for md3 ? I understand /dev/sdb4 is now spare because probably it failed to synchronize it 100%, but why does it show /dev/sda4 as up? Shouldn't it be [__]? Or [_U] anyway? The /dev/sda drive now cannot even be accessed by SMART anymore apparently, so I wouldn't expect it to be up. What is wrong with my interpretation of the output? I attach also the outputs of mdadm --detail for the four partitions: /dev/md0: Version : 00.90 Creation Time : Fri Jan 21 18:43:07 2011 Raid Level : raid1 Array Size : 9764800 (9.31 GiB 10.00 GB) Used Dev Size : 9764800 (9.31 GiB 10.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:27:33 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : a3b4dbbd:859bf7f2:bde36644:fcef85e2 Events : 0.7704 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 17 1 active sync /dev/sdb1 2 8 1 - faulty spare /dev/sda1 /dev/md1: Version : 00.90 Creation Time : Fri Jan 21 18:43:15 2011 Raid Level : raid1 Array Size : 244140992 (232.83 GiB 250.00 GB) Used Dev Size : 244140992 (232.83 GiB 250.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:39:06 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : 8bcd5765:90dc93d5:cc70849c:224ced45 Events : 0.1508280 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 18 1 active sync /dev/sdb2 2 8 2 - faulty spare /dev/sda2 /dev/md2: Version : 00.90 Creation Time : Fri Jan 21 18:43:19 2011 Raid Level : raid1 Array Size : 244140992 (232.83 GiB 250.00 GB) Used Dev Size : 244140992 (232.83 GiB 250.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:46:44 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : 2885668b:881cafed:b8275ae8:16bc7171 Events : 0.2289636 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 19 1 active sync /dev/sdb3 2 8 3 - faulty spare /dev/sda3 /dev/md3: Version : 00.90 Creation Time : Fri Jan 21 18:43:22 2011 Raid Level : raid1 Array Size : 478713792 (456.54 GiB 490.20 GB) Used Dev Size : 478713792 (456.54 GiB 490.20 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 3 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:19:20 2013 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 Number Major Minor RaidDevice State 0 8 4 0 active sync /dev/sda4 1 0 0 1 removed 2 8 20 - spare /dev/sdb4 The active sync on /dev/sda4 baffles me. I am worried because if tomorrow morning I have to replace /dev/sda, I want to be sure what should I sync with what and what is going on. I am also quite baffled by the fact /dev/sda decided to fail exactly when the raid finished resyncing. I'd like to understand what is really happening. Thanks a lot for your patience and help. Massimo

  Read the article

• Clusterware 11gR2 &ndash; Setting up an Active/Passive failover configuration

  - by Gilles Haro

  Oracle is providing a large range of interesting solutions to ensure High Availability of the database. Dataguard, RAC or even both configurations (as recommended by Oracle for a Maximum Available Architecture - MAA) are the most frequently found and used solutions. But, when it comes to protecting a system with an Active/Passive architecture with failover capabilities, people often thinks to other expensive third party cluster systems. Oracle Clusterware technology, which comes along at no extra-cost with Oracle Database or Oracle Unbreakable Linux, is - in the knowing of most people - often linked to Oracle RAC and therefore, is seldom used to implement failover solutions. Oracle Clusterware 11gR2  (a part of Oracle 11gR2 Grid Infrastructure)  provides a comprehensive framework to setup automatic failover configurations. It is actually possible to make "failover-able'", and then to protect, almost any kind of application (from the simple xclock to the most complex Application Server). Quoting Oracle: “Oracle Clusterware is a portable cluster software that allows clustering of single servers so that they cooperate as a single system. Oracle Clusterware also provides the required infrastructure for Oracle Real Application Clusters (RAC). In addition Oracle Clusterware enables the protection of any Oracle application or any other kind of application within a cluster.” In the next couple of lines, I will try to present the different steps to achieve this goal : Have a fully operational 11gR2 database protected by automatic failover capabilities. I assume you are fluent in installing Oracle Database 11gR2, Oracle Grid Infrastructure 11gR2 on a Linux system and that ASM is not a problem for you (as I am using it as a shared storage). If not, please have a look at Oracle Documentation. As often, I made my tests using an Oracle VirtualBox environment. The scripts are tested and functional on my system. Unfortunately, there can always be a typo or a mistake. This blog entry does not replace a course around the Clusterware Framework. I just hope it will let you see how powerful it is and that it will give you the whilst to go further with it...  Note : This entry has been revised (rev.2) following comments from Philip Newlan. Prerequisite 2 Linux boxes (OELCluster01 and OELCluster02) at the same OS level. I used OEL 5 Update 5 with an Enterprise Kernel. Shared Storage (SAN). On my VirtualBox system, I used Openfiler to simulate the SAN Oracle 11gR2 Database (11.2.0.1) Oracle 11gR2 Grid Infrastructure (11.2.0.1)   Step 1 - Install the software Using asmlib, create 3 ASM disks (ASM_CRS, ASM_DTA and ASM_FRA) Install Grid Infrastructure for a cluster (OELCluster01 and OELCluster02 are the 2 nodes of the cluster) Use ASM_CRS to store Voting Disk and OCR. Use SCAN. Install Oracle Database Standalone binaries on both nodes. Use asmca to check/mount the disk groups on 2 nodes Use dbca to create and configure a database on the primary node Let's name it DB11G. Copy the pfile, password file to the second node. Create adump directoty on the second node.   Step 2 - Setup the resource to be protected After its creation with dbca, the database is automatically protected by the Oracle Restart technology available with Grid Infrastructure. Consequently, it restarts automatically (if possible) after a crash (ex: kill -9 smon). A database resource has been created for that in the Cluster Registry. We can observe this with the command : crsctl status resource that shows and ora.dba11g.db entry. Let's save the definition of this resource, for future use : mkdir -p /crs/11.2.0/HA_scripts chown oracle:oinstall /crs/11.2.0/HA_scripts crsctl status resource ora.db11g.db -p > /crs/11.2.0/HA_scripts/myResource.txt Although very interesting, Oracle Restart is not cluster aware and cannot restart the database on any other node of the cluster. So, let's remove it from the OCR definitions, we don't need it ! srvctl stop database -d DB11G srvctl remove database -d DB11G Instead of it, we need to create a new resource of a more general type : cluster_resource. Here are the steps to achieve this : Create an action script :  /crs/11.2.0/HA_scripts/my_ActivePassive_Cluster.sh #!/bin/bash export ORACLE_HOME=/oracle/product/11.2.0/dbhome_1 export ORACLE_SID=DB11G case $1 in 'start')   $ORACLE_HOME/bin/sqlplus /nolog <<EOF   connect / as sysdba   startup EOF   RET=0   ;; 'stop')   $ORACLE_HOME/bin/sqlplus /nolog <<EOF   connect / as sysdba   shutdown immediate EOF   RET=0   ;; 'clean')   $ORACLE_HOME/bin/sqlplus /nolog <<EOF   connect / as sysdba   shutdown abort    ##for i in `ps -ef | grep -i $ORACLE_SID | awk '{print $2}' ` ;do kill -9 $i; done EOF   RET=0   ;; 'check')    ok=`ps -ef | grep smon | grep $ORACLE_SID | wc -l`    if [ $ok = 0 ]; then      RET=1    else      RET=0    fi    ;; '*')      RET=0   ;; esac if [ $RET -eq 0 ]; then    exit 0 else    exit 1 fi   This script must provide, at least, methods to start, stop, clean and check the database. It is self-explaining and contains nothing special. Just be aware that it must be runnable (+x), it runs as Oracle user (because of the ACL property - see later) and needs to know about the environment. Also make sure it exists on every node of the cluster. Moreover, as of 11.2, the clean method is mandatory. It must provide the “last gasp clean up”, for example, a shutdown abort or a kill –9 of all the remaining processes. chmod +x /crs/11.2.0/HA_scripts/my_ActivePassive_Cluster.sh scp  /crs/11.2.0/HA_scripts/my_ActivePassive_Cluster.sh   oracle@OELCluster02:/crs/11.2.0/HA_scripts Create a new resource file, based on the information we got from previous  myResource.txt . Name it myNewResource.txt. myResource.txt  is shown below. As we can see, it defines an ora.database.type resource, named ora.db11g.db. A lot of properties are related to this type of resource and do not need to be used for a cluster_resource. NAME=ora.db11g.db TYPE=ora.database.type ACL=owner:oracle:rwx,pgrp:oinstall:rwx,other::r-- ACTION_FAILURE_TEMPLATE= ACTION_SCRIPT= ACTIVE_PLACEMENT=1 AGENT_FILENAME=%CRS_HOME%/bin/oraagent%CRS_EXE_SUFFIX% AUTO_START=restore CARDINALITY=1 CHECK_INTERVAL=1 CHECK_TIMEOUT=600 CLUSTER_DATABASE=false DB_UNIQUE_NAME=DB11G DEFAULT_TEMPLATE=PROPERTY(RESOURCE_CLASS=database) PROPERTY(DB_UNIQUE_NAME= CONCAT(PARSE(%NAME%, ., 2), %USR_ORA_DOMAIN%, .)) ELEMENT(INSTANCE_NAME= %GEN_USR_ORA_INST_NAME%) DEGREE=1 DESCRIPTION=Oracle Database resource ENABLED=1 FAILOVER_DELAY=0 FAILURE_INTERVAL=60 FAILURE_THRESHOLD=1 GEN_AUDIT_FILE_DEST=/oracle/admin/DB11G/adump GEN_USR_ORA_INST_NAME= GEN_USR_ORA_INST_NAME@SERVERNAME(oelcluster01)=DB11G HOSTING_MEMBERS= INSTANCE_FAILOVER=0 LOAD=1 LOGGING_LEVEL=1 MANAGEMENT_POLICY=AUTOMATIC NLS_LANG= NOT_RESTARTING_TEMPLATE= OFFLINE_CHECK_INTERVAL=0 ORACLE_HOME=/oracle/product/11.2.0/dbhome_1 PLACEMENT=restricted PROFILE_CHANGE_TEMPLATE= RESTART_ATTEMPTS=2 ROLE=PRIMARY SCRIPT_TIMEOUT=60 SERVER_POOLS=ora.DB11G SPFILE=+DTA/DB11G/spfileDB11G.ora START_DEPENDENCIES=hard(ora.DTA.dg,ora.FRA.dg) weak(type:ora.listener.type,uniform:ora.ons,uniform:ora.eons) pullup(ora.DTA.dg,ora.FRA.dg) START_TIMEOUT=600 STATE_CHANGE_TEMPLATE= STOP_DEPENDENCIES=hard(intermediate:ora.asm,shutdown:ora.DTA.dg,shutdown:ora.FRA.dg) STOP_TIMEOUT=600 UPTIME_THRESHOLD=1h USR_ORA_DB_NAME=DB11G USR_ORA_DOMAIN=haroland USR_ORA_ENV= USR_ORA_FLAGS= USR_ORA_INST_NAME=DB11G USR_ORA_OPEN_MODE=open USR_ORA_OPI=false USR_ORA_STOP_MODE=immediate VERSION=11.2.0.1.0 I removed database type related entries from myResource.txt and modified some other to produce the following myNewResource.txt. Notice the NAME property that should not have the ora. prefix Notice the TYPE property that is not ora.database.type but cluster_resource. Notice the definition of ACTION_SCRIPT. Notice the HOSTING_MEMBERS that enumerates the members of the cluster (as returned by the olsnodes command). NAME=DB11G.db TYPE=cluster_resource DESCRIPTION=Oracle Database resource ACL=owner:oracle:rwx,pgrp:oinstall:rwx,other::r-- ACTION_SCRIPT=/crs/11.2.0/HA_scripts/my_ActivePassive_Cluster.sh PLACEMENT=restricted ACTIVE_PLACEMENT=0 AUTO_START=restore CARDINALITY=1 CHECK_INTERVAL=10 DEGREE=1 ENABLED=1 HOSTING_MEMBERS=oelcluster01 oelcluster02 LOGGING_LEVEL=1 RESTART_ATTEMPTS=1 START_DEPENDENCIES=hard(ora.DTA.dg,ora.FRA.dg) weak(type:ora.listener.type,uniform:ora.ons,uniform:ora.eons) pullup(ora.DTA.dg,ora.FRA.dg) START_TIMEOUT=600 STOP_DEPENDENCIES=hard(intermediate:ora.asm,shutdown:ora.DTA.dg,shutdown:ora.FRA.dg) STOP_TIMEOUT=600 UPTIME_THRESHOLD=1h Register the resource. Take care of the resource type. It needs to be a cluster_resource and not a ora.database.type resource (Oracle recommendation) .   crsctl add resource DB11G.db  -type cluster_resource -file /crs/11.2.0/HA_scripts/myNewResource.txt Step 3 - Start the resource crsctl start resource DB11G.db This command launches the ACTION_SCRIPT with a start and a check parameter on the primary node of the cluster. Step 4 - Test this We will test the setup using 2 methods. crsctl relocate resource DB11G.db This command calls the ACTION_SCRIPT  (on the two nodes)  to stop the database on the active node and start it on the other node. Once done, we can revert back to the original node, but, this time we can use a more "MS$ like" method :Turn off the server on which the database is running. After short delay, you should observe that the database is relocated on node 1. Conclusion Once the software installed and the standalone database created (which is a rather common and usual task), the steps to reach the objective are quite easy : Create an executable action script on every node of the cluster. Create a resource file. Create/Register the resource with OCR using the resource file. Start the resource. This solution is a very interesting alternative to licensable third party solutions. References Clusterware 11gR2 documentation Oracle Clusterware Resource Reference Clusterware for Unbreakable Linux Using Oracle Clusterware to Protect A Single Instance Oracle Database 11gR1 (to have an idea of complexity) Oracle Clusterware on OTN   Gilles Haro Technical Expert - Core Technology, Oracle Consulting   

  Read the article

• Clusterware 11gR2 &ndash; Setting up an Active/Passive failover configuration

  - by Gilles Haro

  Oracle provides many interesting ways to ensure High Availability. Dataguard configurations, RAC configurations or even both (as recommended for a Maximum Available Architecture - MAA) are the most frequently found. But when it comes to protecting a system with an Active/Passive architecture with failover capabilities, one often thinks to expensive third party cluster systems. Oracle Clusterware technology, which comes free with Oracle Database, is – in the knowing of most people - often linked to Oracle RAC and therefore, is rarely used to implement failover solutions. 11gR2 Clusterware – which is part of Oracle Grid Infrastructure - provides a comprehensive framework to setup automatic failover configurations. It is actually possible to make “failover-able'” and, therefore to protect, almost every kind of application (from xclock to the more complex Application Server) In the next couple of lines, I will try to present the different steps to achieve this goal : Have a fully operational 11gR2 database protected by automatic failover capabilities. I assume you are fluent in installing Oracle Database 11gR2, Oracle Grid Infrastructure 11gR2 on a Linux system and that ASM is not a problem for you (as I am using it as a shared storage). If not, please have a look at Oracle Documentation. As often, I made my tests using an Oracle VirtualBox environment. The scripts are tested and functional. Unfortunately, there can always be a typo or a mistake. This blog entry is not a course around the Clusterware Framework. I just hope it will let you see how powerful it is and that it will give you the whilst to go further with it…   Prerequisite 2 Linux boxes (OELCluster01 and OELCluster02) at the same OS level. I used OEL 5 Update 5 with Enterprise Kernel. Shared Storage (SAN). On my VirtualBox system, I used Openfiler to simulate the SAN Oracle 11gR2 Database (11.2.0.1) Oracle 11gR2 Grid Infrastructure (11.2.0.1)   Step 1 – Install the software Using asmlib, create 3 ASM disks (ASM_CRS, ASM_DTA and ASM_FRA) Install Grid Infrastructure for a cluster (OELCluster01 and OELCluster02 are the 2 nodes of the cluster) Use ASM_CRS to store Voting Disk and OCR. Use SCAN. Install Oracle Database Standalone binaries on both nodes. Use asmca to check/mount the disk groups on 2 nodes Use dbca to create and configure a database on the primary node Let’s name it DB11G. Copy the pfile, password file to the second node. Create adump directoty on the second node.   Step 2 - Setup the resource to be protected After its creation with dbca, the database is automatically protected by the Oracle Restart technology available with Grid Infrastructure. Consequently, it restarts automatically (if possible) after a crash (ex: kill –9 smon). A database resource has been created for that in the Cluster Registry. We can observe this with the command : crsctl status resource that shows and ora.dba11g.db entry. Let’s save the definition of this resource, for future use : mkdir –p /crs/11.2.0/HA_scripts chown oracle:oinstall /crs/11.2.0/HA_scripts crsctl status resource ora.db11g.db -p > /crs/11.2.0/HA_scripts/myResource.txt Although very interesting, Oracle Restart is not cluster aware and cannot restart the database on any other node of the cluster. So, let’s remove it from the OCR definitions, we don’t need it ! srvctl stop database -d DB11G srvctl remove database -d DB11G Instead of it, we need to create a new resource of a more general type : cluster_resource. Here are the steps to achieve this : Create an action script :  /crs/11.2.0/HA_scripts/my_ActivePassive_Cluster.sh #!/bin/bash export ORACLE_HOME=/oracle/product/11.2.0/dbhome_1 export ORACLE_SID=DB11G case $1 in 'start')   $ORACLE_HOME/bin/sqlplus /nolog <<EOF   connect / as sysdba   startup EOF   RET=0   ;; 'stop')   $ORACLE_HOME/bin/sqlplus /nolog <<EOF   connect / as sysdba   shutdown immediate EOF   RET=0   ;; 'check')    ok=`ps -ef | grep smon | grep $ORACLE_SID | wc -l`    if [ $ok = 0 ]; then      RET=1    else      RET=0    fi    ;; '*')      RET=0   ;; esac if [ $RET -eq 0 ]; then    exit 0 else    exit 1 fi   This script must provide, at least, methods to start, stop and check the database. It is self-explaining and contains nothing special. Just be aware that it is run as Oracle user (because of the ACL property – see later) and needs to know about the environment. It also needs to be present on every node of the cluster. chmod +x /crs/11.2.0/HA_scripts/my_ActivePassive_Cluster.sh scp  /crs/11.2.0/HA_scripts/my_ActivePassive_Cluster.sh   oracle@OELCluster02:/crs/11.2.0/HA_scripts Create a new resource file, based on the information we got from previous  myResource.txt . Name it myNewResource.txt. myResource.txt  is shown below. As we can see, it defines an ora.database.type resource, named ora.db11g.db. A lot of properties are related to this type of resource and do not need to be used for a cluster_resource. NAME=ora.db11g.db TYPE=ora.database.type ACL=owner:oracle:rwx,pgrp:oinstall:rwx,other::r-- ACTION_FAILURE_TEMPLATE= ACTION_SCRIPT= ACTIVE_PLACEMENT=1 AGENT_FILENAME=%CRS_HOME%/bin/oraagent%CRS_EXE_SUFFIX% AUTO_START=restore CARDINALITY=1 CHECK_INTERVAL=1 CHECK_TIMEOUT=600 CLUSTER_DATABASE=false DB_UNIQUE_NAME=DB11G DEFAULT_TEMPLATE=PROPERTY(RESOURCE_CLASS=database) PROPERTY(DB_UNIQUE_NAME= CONCAT(PARSE(%NAME%, ., 2), %USR_ORA_DOMAIN%, .)) ELEMENT(INSTANCE_NAME= %GEN_USR_ORA_INST_NAME%) DEGREE=1 DESCRIPTION=Oracle Database resource ENABLED=1 FAILOVER_DELAY=0 FAILURE_INTERVAL=60 FAILURE_THRESHOLD=1 GEN_AUDIT_FILE_DEST=/oracle/admin/DB11G/adump GEN_USR_ORA_INST_NAME= GEN_USR_ORA_INST_NAME@SERVERNAME(oelcluster01)=DB11G HOSTING_MEMBERS= INSTANCE_FAILOVER=0 LOAD=1 LOGGING_LEVEL=1 MANAGEMENT_POLICY=AUTOMATIC NLS_LANG= NOT_RESTARTING_TEMPLATE= OFFLINE_CHECK_INTERVAL=0 ORACLE_HOME=/oracle/product/11.2.0/dbhome_1 PLACEMENT=restricted PROFILE_CHANGE_TEMPLATE= RESTART_ATTEMPTS=2 ROLE=PRIMARY SCRIPT_TIMEOUT=60 SERVER_POOLS=ora.DB11G SPFILE=+DTA/DB11G/spfileDB11G.ora START_DEPENDENCIES=hard(ora.DTA.dg,ora.FRA.dg) weak(type:ora.listener.type,uniform:ora.ons,uniform:ora.eons) pullup(ora.DTA.dg,ora.FRA.dg) START_TIMEOUT=600 STATE_CHANGE_TEMPLATE= STOP_DEPENDENCIES=hard(intermediate:ora.asm,shutdown:ora.DTA.dg,shutdown:ora.FRA.dg) STOP_TIMEOUT=600 UPTIME_THRESHOLD=1h USR_ORA_DB_NAME=DB11G USR_ORA_DOMAIN=haroland USR_ORA_ENV= USR_ORA_FLAGS= USR_ORA_INST_NAME=DB11G USR_ORA_OPEN_MODE=open USR_ORA_OPI=false USR_ORA_STOP_MODE=immediate VERSION=11.2.0.1.0 I removed database type related entries from myResource.txt and modified some other to produce the following myNewResource.txt. Notice the NAME property that should not have the ora. prefix Notice the TYPE property that is not ora.database.type but cluster_resource. Notice the definition of ACTION_SCRIPT. Notice the HOSTING_MEMBERS that enumerates the members of the cluster (as returned by the olsnodes command). NAME=DB11G.db TYPE=cluster_resource DESCRIPTION=Oracle Database resource ACL=owner:oracle:rwx,pgrp:oinstall:rwx,other::r-- ACTION_SCRIPT=/crs/11.2.0/HA_scripts/my_ActivePassive_Cluster.sh PLACEMENT=restricted ACTIVE_PLACEMENT=0 AUTO_START=restore CARDINALITY=1 CHECK_INTERVAL=10 DEGREE=1 ENABLED=1 HOSTING_MEMBERS=oelcluster01 oelcluster02 LOGGING_LEVEL=1 RESTART_ATTEMPTS=1 START_DEPENDENCIES=hard(ora.DTA.dg,ora.FRA.dg) weak(type:ora.listener.type,uniform:ora.ons,uniform:ora.eons) pullup(ora.DTA.dg,ora.FRA.dg) START_TIMEOUT=600 STOP_DEPENDENCIES=hard(intermediate:ora.asm,shutdown:ora.DTA.dg,shutdown:ora.FRA.dg) STOP_TIMEOUT=600 UPTIME_THRESHOLD=1h Register the resource. Take care of the resource type. It needs to be a cluster_resource and not a ora.database.type resource (Oracle recommendation) .   crsctl add resource DB11G.db  -type cluster_resource -file /crs/11.2.0/HA_scripts/myNewResource.txt Step 3 - Start the resource crsctl start resource DB11G.db This command launches the ACTION_SCRIPT with a start and a check parameter on the primary node of the cluster. Step 4 - Test this We will test the setup using 2 methods. crsctl relocate resource DB11G.db This command calls the ACTION_SCRIPT  (on the two nodes)  to stop the database on the active node and start it on the other node. Once done, we can revert back to the original node, but, this time we can use a more “MS$ like” method :Turn off the server on which the database is running. After short delay, you should observe that the database is relocated on node 1. Conclusion Once the software installed and the standalone database created (which is a rather common and usual task), the steps to reach the objective are quite easy : Create an executable action script on every node of the cluster. Create a resource file. Create/Register the resource with OCR using the resource file. Start the resource. This solution is a very interesting alternative to licensable third party solutions.   References Clusterware 11gR2 documentation Oracle Clusterware Resource Reference   Gilles Haro Technical Expert - Core Technology, Oracle Consulting   

  Read the article

• Updating D3 column chart with different values and different data sizes

  - by mbeasley

  Background I am attempting to create a reusable chart object with D3.js. I have setup a chart() function that will produce a column chart. On a click event on any of the columns, the chart will update with a new random data array that will contain a random number of data points (i.e. the original chart could have 8 columns, but upon update, could have 20 columns or 4 columns). Problem Say I have 8 data points (and thus 8 columns) in my original dataset. When I update the chart with random data, the columns appropriately adjust their height to the new values - but new bars aren't added. Additionally, while the width of the columns appropriately adjust to accommodate the width of the container and the new number of data points, if that number of data points is less than the original set, then some of those columns from the original dataset will linger until the number of data points is greater than or equal than the original. My end goal is to have new data dynamically added or old data outside of the range of the new data count dynamically removed. I've created a jsfiddle of the behavior. You may have to click the columns a couple of times to see the behavior I'm describing. Additionally, I've pasted my code below. Thanks in advance! function chart(config) { // set default options var defaultOptions = { selector: '#chartZone', class: 'chart', id: null, data: [1,2,6,4, 2, 6, 7, 2], type: 'column', width: 200, height: 200, callback: null, interpolate: 'monotone' }; // fill in unspecified settings in the config with the defaults var settings = $.extend(defaultOptions, config); function my() { // generate chart with this function var w = settings.width, h = settings.height, barPadding = 3, scale = 10, max = d3.max(settings.data); var svg = d3.select(settings.selector) // create the main svg container .append("svg") .attr("width",w) .attr("height",h); var y = d3.scale.linear().range([h, 0]), yAxis = d3.svg.axis().scale(y).ticks(5).orient("left"), x = d3.scale.linear().range([w, 0]); y.domain([0, max]).nice(); x.domain([0, settings.data.length - 1]).nice(); var rect = svg.selectAll("rect") .data(settings.data) .enter() .append("rect") .attr("x", function(d,i) { return i * (w / settings.data.length); }) .attr("y", function(d) { return h - h * (d / max); }) .attr("width", w / settings.data.length - barPadding) .attr("height", function(d) { return h * (d / max); }) .attr("fill", "rgb(90,90,90)"); svg.append("svg:g") .attr("class", "y axis") .attr("transform", "translate(-4,0)") .call(yAxis); svg.on("click", function() { var newData = [], maxCap = Math.round(Math.random() * 100); for (var i = 0; i < Math.round(Math.random()*100); i++) { var newNumber = Math.random() * maxCap; newData.push(Math.round(newNumber)); } newMax = d3.max(newData); y.domain([0, newMax]).nice(); var t = svg.transition().duration(750); t.select(".y.axis").call(yAxis); rect.data(newData) .transition().duration(750) .attr("height", function(d) { return h * (d / newMax); }) .attr("x", function(d,i) { return i * (w / newData.length); }) .attr("width", w / newData.length - barPadding) .attr("y", function(d) { return h - h * (d / newMax); }); }); } my(); return my; } var myChart = chart();

  Read the article

• Unsure how to design JavaScript / jQuery functionality which uses XML to create HTML objects

  - by Jack Roscoe

  Hi, I'm using JavScript and jQuery to read an XML document and subsequently use the information from the XML to create HTML objects. The main 'C' nodes in the XML document all have a type attribute, and depending on the type I want to run a function which will create a new html object using the other attributes assigned to that particular 'C' node node. Currently, I have a for loop which extracts each 'C' node from the XML and also it's attributes (e.g. width, height, x, y). Also inside the for loop, I have an if statement which checks the 'type' attribute of the current 'C' node being processed, and depending on the type it will run a different function which will then create a new HTML object with the attributes which have been drawn from the XML. The problem is that there may be more than one 'C' node of the same type, so for example when I'm creating the function that will run when a 'C' node of 'type=1' is detected, I cannot use the 'var p = document.createElement('p')' because if a 'C' node of the same type comes up later in the loop it will clash and override that element with that variable that has just been created. I'm not really sure how to approach this? Here is my entire script. If you need me to elaborate on any parts please ask, I'm sure it's not written in the nicest possible way: var arrayIds = new Array(); $(document).ready(function(){ $.ajax({ type: "GET", url: "question.xml", dataType: "xml", success: function(xml) { $(xml).find("C").each(function(){ arrayIds.push($(this).attr('ID')); }); var svgTag = document.createElement('SVG'); // Create question type objects function ctyp3(x,y,width,height,baC) { alert('test'); var r = document.createElement('rect'); r.x = x; r.y = y; r.width = width; r.height = height; r.fillcolor = baC; svgTag.appendChild(r); } // Extract question data from XML var questions = []; for (j=0; j<arrayIds.length; j++) { $(xml).find("C[ID='" + arrayIds[j] + "']").each(function(){ // pass values questions[j] = { typ: $(this).attr('typ'), width: $(this).find("I").attr('wid'), height: $(this).find("I").attr('hei'), x: $(this).find("I").attr('x'), y: $(this).find("I").attr('x'), baC: $(this).find("I").attr('baC'), boC: $(this).find("I").attr('boC'), boW: $(this).find("I").attr('boW') } alert($(this).attr('typ')); if ($(this).attr('typ') == '3') { ctyp3(x,y,width,height,baC); // alert('pass'); } else { // Add here // alert('fail'); } }); } } }); });

  Read the article

• WinForms: How to determine if window is no longer active (no child window has focus)?

  - by Marek

  My application uses multiple windows I want to hide one specific window in case the application loses focus (when the Active Window is not the application window) source I am handling the Deactivate event of my main form. private void MainForm_Deactivate(object sender, EventArgs e) { Console.WriteLine("deactivate"); if (GetActiveWindow() == this.Handle) { Console.WriteLine("isactive=true"); } else { Console.WriteLine("isactive=false"); } } [DllImport("user32.dll")] static extern IntPtr GetActiveWindow(); The output is always deactivate isactive=true I have observed the same behavior if a new window within my application receives focus and also if I click into a different application. I would expect GetActiveWindow to return the handle of the new active window when called from the Deactivate handler. Instead it always returns the handle of my application window. How is this possible? Is the Deactivate event handled "too soon"? (while the main form is still active?). How can I detect that my application has lost focus (my application window is not the active window) and another application gained it without running GetActiveWindow on a timer?

  Read the article

• jQuery and MooTools Conflict

  - by flipflopmedia

  Okay, so I got jQuery to get along with MooTools with one script, by adding this at the top of the jQuery script: var $j = jQuery.noConflict(); and then replacing every: $( with $j( But how would you get MooTools to like the following script that using jQuery?? Thanks in advance for any input, Tracy //Fade In Content Viewer: By JavaScript Kit: http://www.javascriptkit.com var fadecontentviewer={ csszindex: 100, fade:function($allcontents, togglerid, selected, speed){ var selected=parseInt(selected) var $togglerdiv=$("#"+togglerid) var $target=$allcontents.eq(selected) if ($target.length==0){ //if no content exists at this index position (ie: stemming from redundant pagination link) alert("No content exists at page number "+selected+"!") return } if ($togglerdiv.attr('lastselected')==null || parseInt($togglerdiv.attr('lastselected'))!=selected){ var $toc=$("#"+togglerid+" .toc") var $selectedlink=$toc.eq(selected) $("#"+togglerid+" .next").attr('nextpage', (selected<$allcontents.length-1)? selected+1+'pg' : 0+'pg') $("#"+togglerid+" .prev").attr('previouspage', (selected==0)? $allcontents.length-1+'pg' : selected-1+'pg') $target.css({zIndex: this.csszindex++, visibility: 'visible'}) $target.hide() $target.fadeIn(speed) $toc.removeClass('selected') $selectedlink.addClass('selected') $togglerdiv.attr('lastselected', selected+'pg') } }, setuptoggler:function($allcontents, togglerid, speed){ var $toc=$("#"+togglerid+" .toc") $toc.each(function(index){ $(this).attr('pagenumber', index+'pg') }) var $next=$("#"+togglerid+" .next") var $prev=$("#"+togglerid+" .prev") $next.click(function(){ fadecontentviewer.fade($allcontents, togglerid, $(this).attr('nextpage'), speed) return false }) $prev.click(function(){ fadecontentviewer.fade($allcontents, togglerid, $(this).attr('previouspage'), speed) return false }) $toc.click(function(){ fadecontentviewer.fade($allcontents, togglerid, $(this).attr('pagenumber'), speed) return false }) }, init:function(fadeid, contentclass, togglerid, selected, speed){ $(document).ready(function(){ var faderheight=$("#"+fadeid).height() var $fadecontents=$("#"+fadeid+" ."+contentclass) $fadecontents.css({top: 0, left: 0, height: faderheight, visibility: 'hidden'}) fadecontentviewer.setuptoggler($fadecontents, togglerid, speed) setTimeout(function(){fadecontentviewer.fade($fadecontents, togglerid, selected, speed)}, 100) $(window).bind('unload', function(){ //clean up $("#"+togglerid+" .toc").unbind('click') $("#"+togglerid+" .next", "#"+togglerid+" .prev").unbind('click') }) }) } }

  Read the article

• Selecting values from a multiselect not working in webkit

  - by azz0r

  Hello! The code below works fine in Firefox. However in Chrome and Safari it doesn't. Essentially it returns an array of values, then selects them from multiselect. However in Chrome and safari it doesn't select the items from the multiselect. $('form#movie select#movie_movie').click(function(){ var id = $(this).val(); $("#movie_category option:selected").attr('selected', ''); $("#movie_model option:selected").attr('selected', ''); $("#movie_gallery option:selected").attr('selected', ''); $("#movie_playlist option:selected").attr('selected', ''); if (id != 0) { $.ajax({ type: 'POST', url: "/administration/link/movie/id/"+id, dataType: 'json', beforeSend: function(x) { $.blockUI({theme: true, title: 'Loading', message: '<p>Please wait...</p>', timeout: 1000}); if(x && x.overrideMimeType) { x.overrideMimeType("application/json;charset=UTF-8"); } }, error: function() { $.unblockUI(); alert('Error loading object, please try again'); }, success: function(returned_values) { $.unblockUI(); $.each(returned_values.object.playlist || {}, function(i, item) {$("#movie_playlist option[value='"+item+"']").attr('selected', 'selected');}); $.each(returned_values.object.category || {}, function(i, item) {$("#movie_category option[value='"+item+"']").attr('selected', 'selected');}); $.each(returned_values.object.model || {}, function(i, item) {$("#movie_model option[value='"+item+"']").attr('selected', 'selected');}); $.each(returned_values.object.gallery || {}, function(i, item) {$("#movie_gallery option[value='"+item+"']").attr('selected', 'selected');}); } }); } }); So the part that isn't working in them is: $("#movie_playlist option[value='"+item+"']").attr('selected', 'selected'); Any ideas??

  Read the article

• jQuery validate plugin radio with optional text

  - by timborden

  I'm trying to figure out how to validate a form element with a mix of radio inputs and a text input: <label>Question?</label> <input type="radio" class="mandatory" name="questions[1][]" value="1" />answer 1<br/> <input type="radio" class="mandatory" name="questions[1][]" value="2" />answer 2<br/> <input class="ignore" type="radio" id="questions[1][]" />Other (please specify)<br/> <input class="optional mandatory" type="text" name="questions[1][]" value="" /> I've figured out how to get the form to behave as expected (select and unselect) with the following code: $("input.optional").focus(function () { var this_name = $(this).attr("name"); $("input:radio").filter(function() {return $(this).attr('name') == this_name; }).attr('checked', false); $("input").filter(function() {return $(this).attr('id') == this_name; }).attr('checked', true); }); $(':radio').click(function () { var this_name = $(this).attr("name"); $("input").filter(function() {return $(this).attr('id') == this_name; }).attr('checked', false); $("input.optional").filter(function() {return $(this).attr('name') == this_name; }).val(''); }); I was hoping I could use the class "mandatory" to validate the mix of radio and text inputs: $("form .manditory").each(function () { $(this).rules("add", {required: true}); }); But it's not working as expected. With the radio (id="questions[1][]") selected, and the text input containing content, the form element is still flagged as invalid. Suggestions...maybe a better approach? Thanks in advance. UPDATE Sorry, I should have clarified that I'm using the validate plugin: $("form").validate({ ... });

  Read the article

• changing the bg color of an active click function in jquery?

  - by pingpong

  basically i have this click function in jquery: (this is just a snippet, not full) $('.block').click(function(){ var id= $(this).attr('id'); i want to chnage the background color of the block that has been clicked only, assigned with the id i.e. $('.block').click(function(){ var id= $(this).attr('id'); $('.block').css('background-color','grey'); but where do i assign the id, so jquery knows, to only turn the clicked block into grey, not the others, cheers

  Read the article

• What does 'Highest active time' for disk activity in Windows resource monitor mean?

  - by Nick R

  I know what the disk io, disk queue length and other measures are, but what does 'Highest active time' mean? Is it the amount of time it is busy handling requests, or something else? When it is high, does it mean the CPU is busy doing some IO work, or is it just indicating that the disk is busy handling requests? I'm trying to work out if 50% active time means that 50% of the time the disk is either seeking, reading or writing, rather than the kernel is spending 50% of it's time servicing IO requests. Edit Another quick data point here. If you look at the difference between an SSD and a physical disk, the SSD has significantly less activity, so I guess this really means the amount of time the operating system is waiting for the disk to respond and returning data.

  Read the article

• what does "Net user administrator /active:yes" do to a computer?

  - by Rees

  i just purchased a new laptop and had some issues with it... I called tech support and they had me run this command in cmd prompt by right clicking the cmd icon and selecting "run as administrator" with root C:\windows\system32: "Net user administrator /active:no" after it was determined that it didn't fix the issue we ran this code "Net user administrator /active:yes" i then rebooted..and was asked for my windows login for my user account "Rees" as usual.. however ALL my settings where gone (including my desktop files) as though it was the first time I booted up. WHAT in the world happened with this command?? I desperately NEED my user accounts and files back to how they were!! (running windows 7) Please help!

  Read the article

• How can Windows XP/7 users cleanly connect to Mac OS X Server 10.9.4 Mavericks with Active Directory integration?

  - by JakeGould

  I’m a Linux/Unix systems admin who also manages a Macintosh server infrastructure & there is a lone Mac Mini in the mix running 10.9.4 that I would like Windows XP & Windows 7 users to connect to with little or no hassle. The problem? Windows users can’t seem to even get to the point of a password prompt yet connect. Mind you this server replaced a Mac OS X 10.6.8 server that had issues, but never had issues with Windows users connected. The gist of this post is: The tons of different messages out there about Mac OS X 10.9.4 Samba support are mind-numbingly confusing. Can anyone share some solid specifics here? I’ve read pieces like this one here that suggest turning off file sharing & then adding a share with AFP/SMB enabled would work. But the suggestion seems to apply to 10.8. And from what I know a lot has changed in Samba support in 10.9 let alone the iterations to 10.9.4. Then I found this great tutorial here that explains things step-by-step. Which seems like it should work, but the problem is the example given applies to a local user created on the Mac when I would like users in an Active Directory group—which the Mac is bound to—access the Mac Mini shares. There are also tons of great tips here on MacWindows.com but nothing seems solid to the issue I am facing. So from what I am reading these are my options: Local User Versus Active Directory: Setup a common local user on the Mac OS X 10.9.4 server to be used for Samba sharing since Active Directory won’t work. Is this really the case? Because loss of AD integration is a major pain. Do Extended File Attributes Get Retained from Windows Users: If this were to work, how do extended attributes come into play? Loss of metadata & related info is not an option. How Fragile is Any of this to Updates: How does any of this shake out with Mac OS X updates as well as Windows updates? Installing Official, Open Source Samba: Would upgrading the Samba install on the server to the official open source Samba via a package like SMBUp or via the Hombrew method described here help or make the issue worse? I fully understand there have historically been issues in mixed environments, but nowadays Windows users connecting to a Mac seem to have a truly hellish road ahead of them. Unless I am missing something?

  Read the article

• Can I monitor active user count on my iis sites?

  - by Dejan.S

  We are having problems with performance on our server that host our websites that the processor gets upp to 90%. I would like to monitor the amount of users active on your sites that are published on the iis. My question, is this possible? is there any software for this? EDIT current (like this second) visitor count on all the active websites on our iis REASON FOR THIS if i can get the visitor amount on the days the CPU is not overloaded and and compare it to the days it is then i atleast know that this CAN be a reason why this is happening and i can take it from there. Otherwise i can focus on the code on the sites, or maybe google crawler is causing this, there are manythings that can cause this you know? for me this is just a simple way of troubleshooting.

  Read the article

• How to stop pptpd even when there are active vpn client connections?

  - by Michael Z

  After issued command to stop pptpd, the pptpd won't stop until all the VPN client has disconnected. The following code shows pptpd is still running after issuing the stop command. ubuntu@ip-10-138-31-87:~$ sudo /etc/init.d/pptpd stop Stopping PPTP: pptpd. ubuntu@ip-10-138-31-87:~$ ps -ef |grep pptpd root 5524 1 0 21:46 ? 00:00:00 pptpd [<myIp>:8544 - 0000] root 5525 5524 0 21:46 pts/1 00:00:00 /usr/sbin/pppd local file /etc/ppp/pptpd-options 115200 192.168.0.1:192.168.0.234 ipparam <myIP> plugin /usr/lib/pptpd/pptpd-logwtmp.so pptpd-original-ip <myIP> ubuntu 5564 4668 0 21:50 pts/4 00:00:00 grep --color=auto pptpd After all the active vpn client connections were disconnected mannually, the pptpd then stops. Is there a way that pptpd can be forced to stop even there are active vpn client connections?

  Read the article

• I'm using a compatible active DisplayPort to DVI adapter with EyeFinity, why does my monitor still flicker?

  - by Christopher Galpin

  I specifically chose an active DisplayPort <- DVI adapter for use with EyeFinity right out of my graphic card vendor's list of confirmed compatible adapters. Yet the screen fails horribly, it blinks on and off constantly, sometimes the graphics go screwy and the appropriate resolutions won't be available. Sometimes the resolution will be available but I'll discover it's only with interlaced refresh rates and bounces up and down. I have to switch the resolution back and forth, again and again, to get it to work correctly, and then it fails again and the process must be repeated the moment the monitor is turned off or I reboot. It's maddening. What is wrong? Is my GFX card supplying insufficient voltage? (Firmware tweaks allegedly help some people, but my card's isn't modifiable.) Could the adapter be defective? Is it not "active" enough for my card and I need an expensive powered adapter? Is this endemic to DisplayPort in general?

  Read the article

• Why does Windows Firewall show "Unidentified network" as one of my "Active public networks"?

  - by MousePad

  I have a machine that has wifi and ethernet. I have wifi active, and am not using ethernet. My Windows firewall shows two active networks, one is the wifi network I connect to, and the other is "Unidentified network". What is this unidentified network? I can't seem to be able to get rid of it because I can't find where it is even defined. How can you detect this and know whether this is just something appropriate or possibly a security problem? I am on Windows 7 64bit.

  Read the article

• Trying to figure Windows 2008 Server and Active Directory - complete novice!

  - by Simon E

  I am a novice in networking and I want to learn more about Windows Server 2008 and Active Directory. Basically I have serveral Windows 7 PC's in my home and an IBM server with Win Server 2008 installed. I have enabled Active Directory and set the server to have a static IP. Thats as far as I have got and I feel a little overwhelmed at the moment as I am not sure what to do next. What I eventually want to do is have the Windows 7 PC's to be able to be authenticated by the server - basically a mock up of what most large or medium sized businesses/organisations run. Sorry if I sound a bit sketchy, but I understand some things but not the whole picture, I guess I just need confirmation that I am sort of on the right track :) Also what are some good resources out there you can point me to, what are the absolute basics I need to to get started so I can further my learning?

  Read the article

• Is there an application that will move an active window to the system tray without minimizing it

  - by Robert

  I have an active application (lets say an instant messaging client) whose buddy list I have up (active) on one side of my screen at all times in Windows 7. I would like to remove that icon from the taskbar either by moving it to the system tray (as happens when the app is minimized) or by just removing it altogether. To be clear: I do not want to minimize the window to the system tray (as described in Windows app to hide application from taskbar) I want to keep the window its NORMAL size and location and just get rid of the taskbar icon for the app. I'm looking for any tool, third party, native, registry hack, to accomplish this.

  Read the article

• How do I force an exchange database to become "active"?

  - by makerofthings7

  We had a catastrophic failure where all that remains is a single edb file. No backups. No log files. The database that remains is on the "passive" copy. The "active" copy is missing, but the server is active. The Exchange console reports that the edb file needs to be reseeded, however there is no source to reseed from. How do I make the "invalid" database file (missing logs) valid? How do I make exchange recognize this as a valid database to use as a primary?

  Read the article

• How to detect an active x component that does not respond any more?

  - by koschi

  My application is written in C++ and uses the Qt framework. I use the QAxWidget class to access an active x component. Now I need some kind of mechanism that notifies my application each time the active x component has crashed or does not respond any more (due to dead lock or infinite loop). (1) can easily been done by watching the external process of the active x component. But maybe there is a more elegant approach? But how can (2) be implemented?

  Read the article

• Sharepoint Filter

  - by Albert

  Hi All, I have two lists, Status Name (string) Active (yes/no) Task Name (string) Status (Lookup to Status list) I have the following statuses (These can be changed at any time by the client): New, Active = Yes Open, Active = Yes Not Resolved, Active = No Resolved, Active = No I want to create a view for the Projects list, that shows all active tasks... How would I go about this? Thanks! Albert

  Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >