Search Results

Search found 2166 results on 87 pages for 'aj hdd'.

Page 74/87 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

• Dual booting windows 8/ubuntu 12.04. Grub doesn't appear and machine never boot in ubuntu

  - by black sensei

  i got a new ACER predator AG3620-UR308 which came with windows 8, so i wanted to run ubuntu 12.04.2 on it as a dual booting. To be honest, i've been doing dual booting for a while now so, i did the right thing. the box came with 2TB HDD. so i made 4 partitions with a raw partition just after the windows installation partition I always do manual installation so even if ubuntu didn't detect windows 8, it was ok for me. So i created swap area and finished the installation etc....Grub was install on the only drive there which is sda. After reboot, grub doesn't even come up.So it always boot in windows 8. I did repeat the installation process twice and yield same result. which is weird because this method always works for me so far.Even the laptop am using to write this post is a dual booting windows 7/ mint nadia installed the same way. Is there anything new in windows 8 that i didn't make provision for? Before starting the installation, all i read about was that , windows 8 should be installed first and ubuntu after. I went ahead and disable secure boot from the BIOS and enabled CSM (don't even know what it means) according to Acer custhelp site . I boot from USB and did fdisk -l bellow is the result: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x8c361cb5 Device Boot Start End Blocks Id System /dev/sda1 1 3907029167 1953514583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdb: 8178 MB, 8178892800 bytes 255 heads, 63 sectors/track, 994 cylinders, total 15974400 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006a87e Device Boot Start End Blocks Id System /dev/sdb1 * 2048 15972351 7985152 b W95 FAT32 ubuntu@ubuntu:~$ Can anybody shed some light? thank you in advance

  Read the article

• Dual booting windows 8/ubuntu 12.04.2, Grub doesn't appear and machine never boot in ubuntu

  - by black sensei

  i got a new ACER predator AG3620-UR308 which came with windows 8, so i wanted to run ubuntu 12.04.2 on it as a dual booting. To be honest, i've been doing dual booting for a while now so, i did the right thing. the box came with 2TB HDD. so i made 4 partitions with a raw partition just after the windows installation partition I always do manual installation so even if ubuntu didn't detect windows 8, it was ok for me. So i created swap area and finished the installation etc....Grub was install on the only drive there which is sda. After reboot, grub doesn't even come up.So it always boot in windows 8. I did repeat the installation process twice and yield same result. which is weird because this method always works for me so far.Even the laptop am using to write this post is a dual booting windows 7/ mint nadia installed the same way. Is there anything new in windows 8 that i didn't make provision for? Before starting the installation, all i read about was that , windows 8 should be installed first and ubuntu after. I went ahead and disable secure boot from the BIOS and enabled CSM (don't even know what it means) according to Acer custhelp site . I boot from USB and did fdisk -l bellow is the result: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x8c361cb5 Device Boot Start End Blocks Id System /dev/sda1 1 3907029167 1953514583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdb: 8178 MB, 8178892800 bytes 255 heads, 63 sectors/track, 994 cylinders, total 15974400 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006a87e Device Boot Start End Blocks Id System /dev/sdb1 * 2048 15972351 7985152 b W95 FAT32 ubuntu@ubuntu:~$ Can anybody shed some light? thank you in advance EDIT Hey, i just did another trial with 13.04 this time and still no luck. bios: secure-boot: disabled enable CSM : always 1-delete previous ubuntu partition and swap area partition.now having free space 2- used usb installer to prepare usb with ubuntu-13.04-desktop-amd64.iso 3- rebooted : liveusb didnt detect windows 8, used something else 4-created partition ext4 for / 5-created partition for swap-area 6- default grub path is /dev/sda and clicked install Acer always boots into windows.

  Read the article

• How do you turn on the customizable gnome-panel features (like gnome-applets) in Precise?

  - by chriv

  I resurrected a broken laptop today. I took out the HDD, put it in a USB 3.0 enclosure, and created a VM that would use it. It was running lucid. I took a screenshot of the desktop before I started "do-release-upgrade", because from experience, I will never have my GUI back the way I want it again. I know how to install gnome-panel to get back the "Gnome Classic" session option. I know how to put my minimize, maximize, and close buttons back in the upper-right hand corner of windows (where they belong). I know how to use gdm instead of lightdm. Unity gets worse in every version (and the other desktop OS is going to be even worse with Metro). Here's what I don't know (in order of importance): 1. How do you make the panels in gnome (gnome-panel, to be precise) customizable again (like they were in older versions of Ubuntu)? 2. How do you install applets in the panels now (right-click is now ignored)? 3. How can you customize all of the window elements (like you could in older versions of Ubuntu)? I can't remember much about maverick, natty, or oneiric (except their names), so I don't know exactly when I lost these capabilities. Edit: (no screenshot), my StackExchange reputation (on other StackExchange sites) doesn't carry over to this site, so I can't post the screenshot. Take a look at the panels in the screen hot. They are nice, compact, and VERY functional (disk mounter applet, frequently used shortcuts, workspaces, show desktop, kill window, and trash icons, etc.) Notice how small the fonts (and how little real estate they waste). You can't notice the compact title bars, fonts, and window icons in this screen shot (since I redacted the rest of the desktop), but it's the same story there. Please help. I don't want to learn another distro, but Ubuntu gets less customizable with every "upgrade." Screenshot (not an inline image, since I don't have the reputation yet)... i.stack.imgur.com/puoUT.png

  Read the article

• A better way to organize your Silverlight Code Snippets.

  - by mbcrump

  I hate re-writing code. I also hate it when I find a great code snippet on the web and forget to bookmark it or it gets lost in my endless sea of bookmarks. So what do you do to get around this? This is the question that I was asking myself at the end of 2010. How can I get my Silverlight code organized? My requirements for a snippet manager were: Needs to be FREE. An easy way to view XAML/C# code behind together in one “view”. I wanted the ability to store the code snippets in cloud in case my HDD dies. Searchable Keywords to quickly find code snippets. I started looking for a snippet manager that would allow me to do just that and finally found Snippet Manager. Before going any further, I think that one of the most important things to note here is that this software supports 37 languages. It’s not just for Silverlight developers nor C# only guys. The software supports Java, SQL and even COBOL.   Below is a screenshot of the Snippet Manager that shows my Silverlight code snippet. You will notice that I have highlighted two sections. The top part is my XAML and the bottom is my C# code behind. I’ve included a sample below of my code snippets so that you can get an idea of how I organized it. Another thing that’s great about this software is that it supports plain text. I added some connection strings in the TEXT section below.  Once you have finished adding your code snippets, you can store them in the cloud. I created a FTP directory called “snippets” on my FTP Server and hit the upload button once I am finished adding my new codes snippets. This will allow me to use the code snippets on another computer with this application on my USB Key. See screenshots below: Enter your FTP credentials below: Hit the Uploads button on the Toolbar: Login in to your FTP Server and verify the following files are now on the FTP Server: Another great feature of the Snippet Manager is that you can also integrate this into VS2010 by clicking Tools –> External Tools: And setting up your External Screen to point to the Executable: You can now launch it by going to Tools –> Snippet Manager. If you want you could also a shortcut to launch the program with HotKeys. As you can see, this is a nice little program that includes everything needed to organize your code snippets very clean. I didn’t go over every feature but this is something that you might want to download and give it a shot.  Subscribe to my feed CodeProject

  Read the article

• Is Ubuntu recognizing and/or using my NVIDIA graphics card?

  - by user212860

  This is my first post here, and I'm pretty new to Ubuntu/Linux. I currently have no other OS except for Ubuntu 13.10. (I used to have Win7 until i got a new terabyte hard drive). My current PC build, if any of this helps: CPU: Intel i5 quad-core Graphics: NVIDIA GeForce GTX 650 RAM: 8 GB HDD: 1 TB SATA 3 Motherboard: MSi Z77 A-G41 OS Ubuntu 13.10 So I recently installed Ubuntu 13.10 and put Steam on it, and I'm seeing that my games run a lot slower than they did when I had Win7. I figured it was a graphics problem, so I checked System Settings Details Overview. It says in "Graphics" that I have "Gallium 0.4 on NVE7" (don't really know what that is). Does this mean that Ubuntu is not using my graphics card? In System Settings Software & Updates Additional Drivers, it clearly shows like this: NVIDIA Corporation: GK107 [GeForce GTX 650] -This device is using an alternative driver (And then it shows a list of drivers that I can switch back and forth to) So this is a bit confusing. In Software and Updates, it clearly shows that I have my NVIDIA card installed, and that I have a driver selected for it. But in System Settings, it shows I have some Gallium 0.4 thing. I had done a bit of research, and ended up typing command: "lspci|grep VGA" in the Terminal. It showed this in response: VGA compatible controller: NVIDIA Corporation GK107 [GeForce GTX 650] (rev a1) The Terminal seems to recognize my graphics card. What it looks like to me, is that I don't have the proper driver, and I might be using my CPU's integrated graphics. When I switch around which driver I am using in that list, it still does not see my card in System Settings. Some of the drivers in the list give me some sort of OpenGL error when I try to run a game. It might just be that my games are running slow because the game developers have not optimized it for Ubuntu that well. However, that still doesn't take away from the fact that System Settings is not showing my NVIDIA card. TL;DR Version: How do I know if my video card is being recognized/used? If my video card is not being used, what is the best way fix that? Please make your answers easy to understand. I do not mind wordy responses, as long as I can follow what you're saying. Any help would be greatly appreciated! Thanks, Jabber5

  Read the article

• New laptop, Windows 8.1, attempting dual install. Ubuntu installer doesn't 'see' existing OS

  - by Flaminica

  Though I've used Ubuntu for a few years, I'm new to installation. Previously I had help and now I'm doing it alone (moved across the world). Windows 8.1 came preinstalled on my new laptop (Toshiba Satellite C70-A-17C - Core i5, 8 GB RAM, 750 GB HDD). I have already followed a few steps I found online to prepare for a dual install (with Ubuntu 14.04). I backed up Windows, created a bootable Ubuntu USB and DVD (just in case one didn't work), turned off fast boot and secure boot, and shrunk C:/. The new unallocated drive portion is 292.97 GB. After shrinking C:/, I restarted Windows a couple of times to make sure everything was working fine (it is). I then attempted to install with the Ubuntu live USB. However, the Ubuntu installer doesn't see that Windows 8.1 is already installed. I don't understand, and don't want to mess with Ubuntu partitioning when I don't know where the partitions will be created. My concern is that, if I go further with the installation process, Windows might be overwritten or compromised in some way. I then tried to reboot using the Ubuntu live DVD, thinking I might get a different result. However, I can't figure out how to make the laptop boot from the CD drive. I went into the BIOS and found no option there, either. Any help is very appreciated! EDIT: Looks like I can't link directly to each photo. Here is my album of screenshots: http://imgur.com/a/zChCo Here you can see that there's no option to boot from CD drive, only USB. Everything looks okay so far. I don't understand this. Ubuntu has not yet been installed. Unmounting partitions? (I chose 'no'.) Even though the laptop came pre-installed with Windows 8.1, the Ubuntu USB installer can't see it. I chose 'something else'. I need to pick and format partitions. I scrolled down and took a second shot to include all information. Completely lost and cancelled installation.

  Read the article

• 12.04 Booting into Terminal

  - by user170796

  To preface this, I would like to say that I am completely new to Ubuntu and have essentially zero programming experience/experience working with command line and terminal. I installed Ubuntu because I would like to get into programming. If you could provide me with the simplest instructions possible, I would be grateful. I have a Lenovo Ideapad Y500 (Intel i7, NVidia GT 750m, 1TB HDD, 16GB SSD cache, 8GB RAM) with Windows 8 on it. Using a Live CD, I installed Ubuntu 12.04 onto a 75 GB partition. During the installation, I kept all default settings except for one thing; I decided to encrypt my home folder, and so checked the corresponding box. The installation completed, and I restarted. Once I restarted, I saw the options "Ubuntu, with Linux 3.2.0-23-generic" "Ubuntu, with Linux 3.2.0-23-generic (recovery mode)" "Memory test (memtest86+)" "Memory test (memtest86+, serial console 115200)" "Windows Recovery Environment (loader) (on /dev/sdb3)" "Windows 8 (loader) (on /dev/sdb5)" "System Setup" I chose the first option, and was directed to a screen with the Ubuntu logo and the row of five dots below that change from orange to white. Then, I was brought to a full screen terminal that prompted me to login, which I did. I saw no option to boot into GUI at all, and am lost. I've been searching around and have tried the "startx" command to no avail. Should the command have some sort of context or something? I've also tried selecting the recovery mode option from the boot manager. I've tried the resume option from the following menu, which eventually just shuts down the computer after displaying a lot of scrolling text that's too fast for me to read. I've also tried the failsafex mode from the recovery mode menu, which only brings up a terminal box at the bottom of the window that covers the entire bottom part of the screen. Commands won't work in this window. When I try to access Windows 8, I get a message saying that the EFI file path was not specified or something along those lines. I had to enable Secure Boot in order to access Windows 8 (I had disabled it to be able to boot from the Live CD), which is functioning normally. I am at a complete loss for what to do. Any help will be extremely appreciated. EDIT: Bonus question! If you could figure out a way for me to boot to Windows 8 without having to enable Secure Boot, it would save me a lot of trouble. I can deal with switching every time, but I'd rather not have to.

  Read the article

• Motherboard HDDPWR1 connector

  - by Eric Leschinski

  I need help identifying the name of a connector. I have a Gateway DX4870-UB318 computer, I opened the case and wanted to attach another hard drive, but to my surprise one existing SATA hard drive was connected to the motherboard with this connector: And here is the spot on the Motherboard where the power was supplied. What is the name of this adapter and where can I get another one? Clues: This computer was bought new October 2013 from best buy, box number: DX4870-UB318. The gateway folks won't divulge the type of motherboard it has nor give specs on it. On the wire itself is an identification code: H.35090NJ01-000 Next to the connector on the motherboard it says: HDDPWR1 and the second one says HDDPWR2. This cable has two SATA power connectors and one mystery connector. The power supply has no molex power cables and no SATA power connectors! This is the most bizarre hard drive power system I've seen. I guess the motherboard folks are trying to remove the burden for desktop power supplies to provide adapters (molex, SATA, other) to CD's and hard drives. Can someone put a name on that white flat 6 pin HDD Power Connector? My Solution I can buy a "SATA Power Y Splitter Cable" to provide more spaces to power sata devices.

  Read the article

• Yum update not working on CentOS 6.2 minimal install

  - by Owen

  Note: This is my first question on the stack exchange network so please give mercy and provide guidance where needed. I have installed a CentOS 6.2 KVM guest and I am having problem getting yum to work. This is my first time working with CentOS so I feel that it's a setting somewhere that I am missing but cannot find using google. Here are my steps; Downloaded CentOS-6.2-x86_64-minimal.iso, booted, and went through default steps (only questions asked where keyboard, timezone, root password and use entire hdd) Restarted, logged in, pinged google.com to no avail Set the following settings; vi /etc/resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 vi /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE="eth0" HWADDR="52:54:00:42:1B:4A" #NM_CONTROLLED="yes" BOOTPROTO=none ONBOOT="yes" NETMASK=255.255.255.0 IPADDR=192.168.122.151 TYPE=Ethernet vi /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=no HOSTNAME=server3.example.com GATEWAY=192.168.122.1 I can now ping google.com ping google.com PING google.com (173.194.70.139) 56(84) bytes of data. 64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_seq=1 ttl=50 time=5.88 ms 64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_seq=2 ttl=50 time=5.77 ms But I cannot 'yum update' yum update Loaded plugins: fastestmirror, presto Loading mirror speeds from cached hostfile Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os error was 14: PYCURL ERROR 7 - "Failed to connect to 2a01:c0:2:4:216:3eff:fe0d:266d: Network is unreachable" Error: Cannot find a valid baseurl for repo: base My KVM guest is also NAT'd incase it's of concern.

  Read the article

• Xorg server won't start after fresh install of Debian 5.04, screen goes blank (Intel Atom D510(Pinet

  - by Kamil Zadora

  Hello, I have installed Debian 5.04 Lenny on my new Intel D510MO motheboard. I fixed some issues with incorrect drive mapping (for some reason during installation my hdd was on sdb, after a restart it is under sda - fixed in grub), and now I am struggling with getting graphical enviroment up and running, I installed the graphical enviroment using the Debian installer. I am not an linux expert by any means, I assume that I need to edit the xorg.conf file. Any hints appreciated! UPDATE1: No change after dpkg-reconfigure xserver-xorg Here is my current xorg.conf: # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "pl" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" EndSection Section "Device" Identifier "Configured Video Device" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" EndSection UPDATE2: I have installed vnc4server package. I can connect over vnc from my windows 7 laptop and i see empty desktop with terminal window open. Seems that the xserver and gdm are running but they cant talk with my GPU. I am not sure if a can use any gui tool to configure it overthe vnc, as all I see is the terminal window, no taskbars etc. UPDATE3: My current Xorg.0.log http://pastebin.pl/18918 The graphic chipset integrated into the D510 processor is Intel 945GC

  Read the article

• blu-ray archiving in vmware ESXi 4

  - by spacecadet77

  Hi, I need some advice about using blu-ray writer for archiving data on vmware ESXi 4. At office we have IBM System x3400 Tower server with ESXi 4 hipervisor and OpenSuse and CentOS GNU/Linux system as guests. Will blu-ray writer work in this setup, and if it will is there any particular model you can suggest. Best regards IBM System x3400 Tower server specification: 1x Intel Quad-Core Xeon E5410 2.33GHz/ 12MB/ 1333MHz (2x CPU max) Intel 5000P chipset, 2x 1GB PC2-5300 DDR2 667MHz SDRAM ECC Chipkill (32GB max) 2x4GB (2x2GB) PC2-5300 CL5 ECC DDR2 FBDIMM (x3400, x3550, x3650) SAS/SATA Hot-Swap Open Bay (0xHDD std, 4xHDD max, 8xHDD optional) ServeRAID 8K dual channel SAS/SATA controller (RAID 0,1,1E,10,5,6, 256MB, Battery Backup) Graphics ATI® RN50(ES1000) 16MB DDR, CD-RW/DVD Combo no FDD GigaEthernet, Tower with Power Supply 835W (opt Redudant) Slot 1: half-length, PCI-Express x8(x4 electrical) Slot 2: full, PCI-Express x8 Slot 3: full, PCI-Express x8 Slot 4: full, 64-bit 133MHz 3.3v PCI-X Slot 5: full, 64-bit 133MHz 3.3v PCI-X , Slot 6: half-length, 32-bit 33MHz 5.0v PCI ports: 4x USB (Vers 2.0), 2x PS/2, parallel, 2x serial (9-pin), VGA, RJ-45 (ethernet ), RJ-45 (sys mgm) HDD 4 x TB 7200rpm / Serial ATA II 3.0Gb/s / 16MB, RoHS

  Read the article

• NetBSD Networking

  - by Mike

  Hello, everyone! I have an old Toshiba Satellite 4015CDT, with Pentium II MMX, 32MB RAM, 4GB HDD. It also has one USB 1.0 port, parallel and serial ports, a 3.5" floppy drive and a CD-ROM drive (probably almost dead). I've installed NetBSD on this machine (full install) and now I want to connect it to the Internet. Although it has one PCMCIA modem card in it, it is obviously not an option. I've narrowed down my available options to the following: Connect a USB wireless adapter. I have a Realtek RTL8192 adapter, but although the system gives me the device's name (through dmesg) it fails to recognize it as a network adapter. Connect the laptop to another machine through a serial connection, so that the other machine will serve as a bridge to the Internet. Here is the page from the NetBSD documentation on serial connections. Unfortunately, I was not able to find anything on bridging there. I would very much appreciate your suggestions on the topic. Thanks in advance.

  Read the article

• DVD-ROM: Pioneer DVD-115GA not being detected.

  - by Wesley

  Specs to put things in context: AMD Athlon XP 2400+ @ 2.00 GHz / 2 x 512 MB PC-3200 DDR RAM / 160 GB IDE HDD / 128 MB GeForce 6200 AGP / FIC AM37 / Windows XP Pro SP3 So this computer is actually an upgraded EMachines T2482. I found a used DVD-ROM for cheap... the Pioneer DVD-115GA. I originally had a plain DVD Reader (Lite-On XJ-HD166S) which was quite useless. So I basically did a simple swap of the drive and powered up the computer. The drive could open and close, and I put in a DVD and it was spinning, but no detection. Going into the BIOS, the drive was not detected. (The IDE cable connecting the DVD-ROM is connected to the CD-ROM below it and then attached to the secondary IDE port on the motherboard.) So I started all the way up and tried to scan for hardware changes in Computer Management. Still, nothing. I have the software downloaded from the Pioneer site, and that couldn't detect anything. So what else can I try to hopefully get my DVD-ROM recognized by the BIOS? Thanks in advance!

  Read the article

• VMWare ESX, storage over 2TB

  - by Phliplip

  Hi, First of, i'm a webdeveloper and my server experience lies in setting up FreeBSD servers for webserver. I'm working on a project for at photographer, and i'm hired to develop a new online photo ordering system - where user of course can view their photos :) They have a massive need of storage, thus we have bought a HP G6 and 8x1TB SATA HDD. Our plan is to install VMWare ESX 4.0, running multiple virtual machines; FreeBSD 8 for webserver and some windows servers. Allready done that. Then mount one big storage to the BSD, and share it through Samba to the WinServers. The raid is set up with an array of 2x 1TB to handle the VMs. And the rest is setup as 3 2x1TB to handle the photo-data. Thus 2.73TB for photo-data (the raids are 1+0). Now if we add a datastore in the ESX and add the 3 LUNs we can get a datastore of 2.74TB. But i don't se how i can add this datastore direct to the VM. Only the BSD VM needs access to this. Only way is to create a VirtualDisk, with a max of 2TB (8MB blocksize). This is because the datastore where we save the virtualdisk has a maximum filesize of 2TB. Then add it as a harddisk to the BSD VM. In the 'Add Harddisk' pane for the VM, i see an option for Raw Disk Management. I think this is to access the datastore or the raid directly. Only problem is that its greyed out! Can i access the datastorage directly from the BSD? Without creating and adding virtualdisk.

  Read the article

• Asus P5Q doesn't post at all

  - by Sebi

  I had a very strange incident this evening. I was watching TV on the computer and suddenly the sound stutter. Some seconds later, the screen went black. First I thought ok some error, don't worry. Since the computer didn't react on any input from the mouse or keyboard, I shutted it down by pressing the power button. I tried to reboot but the monitor rest black. All the fans were running, the MB didn't made a beep and the leds are all green as they have to be. The HDD is running too, also the monitor is on. But nothing happens, not even a single message on the screen, just black. Here are the things I already tried with no success: tried to boot with 1 of two rams (each tested alone) turned off all power (pull th plug) for 10 minutes tested the graphic card with another pc. there it worked. tested the RAM with another pc. there it worked. Any hints what to do next?

  Read the article

• Intel Core i7 QuadCore on HP Pavilion dv7 Overheating Issues

  - by kellax

  I bought a brand new HP notebook: HP Pavilion dv7-6b21em BeatsAudio edition. The notebook is about 2 months old and has pretty nasty overheating problem. I mainly use it for development however i do play some games. The disturbing thing is that the computer is loud on pretty simple tasks. Here are the specs: CPU: Intel Core i7-2670QM QuadCore ( 8 threads ) @ 2.20 GHz RAM: ( 8GB ) 2x 4GB @ 1066 HDD: 1TB 7200 GPU: ATI Radeon HD 6770M 1GB Dedicated DDR OS: Windows 7 64bit Enterprise I have an external monitor runing on VGA port an 22' Samsung SyncMaster S24B300 CPU Heat Statistics Platform: rPGA 988B (Socket G2) Frequency: cca. 3000 Mhz VID: 1.1809 - 1.2059 v Revision: D2 CPUID: 0x206A7 TDP: 45.0 Wats, Lithographu: 32 nm Heat: Tj. Max: 100*C, Power 4.5 - 5.9 Wats Core #0: 63*C Load on all is about 0 to 2% Core #1: 65*C Core #2: 66*C Core #3: 67*C I opened the notebook the fan is working fine there is no dust but still right now the fan is pretty loud even tho all i have open is FireFox. When i run a game the heat jumps to whopping 90-97*C. It has not shut down due to overheating yet but the loud fan is pretty annoying considering I'm not really doing anything stressfull. Is there anything i can do to fix this is it maybe a BIOS issue ? I have all drivers updated tho to the latest. I have very few background processes running consuming bare 2GB of RAM and about 2% of CPU. I had it serviced they said there is nothing wrong with it. But i feel that a Notebook that costs 1.2k Euros cant be like this.

  Read the article

• Performance variation

  - by Ree

  During my time spent working with multiple machines, I have noticed that performance of the same machine doing the same tasks in the same order differs and sometimes the difference is big enough to be noticeable. This applies to all the machines I've owned and/or maintained (old and modern). Some examples (many of them you may have noticed yourself) that sometimes are completed in different time frames: POST OS installation Hardware tests and operations (usually executed within a customized OS such as one of the many DOS variants), HDD tests and "low level" formats Software installation or other tasks (such as benchmarks) within a general purpose OS (Windows, Linux, etc) I can imagine this is caused by the fact that a machine is built with many components having to communicate as a whole and since the mechanical and electronic parts aren't perfect the overhead occurs. In the last example, I assume the OS complexity and concurrently running multiple processes has some additional effect as well. However, I'm wondering if this hardware imperfection and overhead is indeed that high to be humanly noticeable? Maybe there are other factors that are influencial as much or even more? So, in short - why? To emphasize: the difference is noticeable on the same machine performing the same tasks and this applies to ANY machine in my experience. I'm not comparing machine to machine performance.

  Read the article

• eMachine W5243 won't POST; fans run but optical drive will not open.

  - by NicciAdonai

  Symptoms are what is described in the title. The machine reacts to the power button being hit by spinning up the two fans: CPU and PSU. The hard drive (SATA) spins up as well. No other reaction. This one symptom is particularly weird, though: the optical drive will not open with the IDE cable attached, but if I unplug it from the mobo it will. I can turn the PC on with it attached, won't open; then unplug IDE while it is still on, WILL open; then plug IDE back in with the PC STILL ON, WON'T open. I have disconnected every peripheral unnecessary to POST. These include: mouse/keyboard, PCI modem, the IDE optical drive (power and data), and the SATA HDD (power and data). Video is onboard. The only two things connected are DB15 video and power cable. There were 2 512 MB DDR2 sticks of RAM in it. I have tried running it with just one of them, then switched the other in. Currently seated is a completely different 1 GB stick that I keep around for troubleshooting purposes, and I have tried it in both slots. I have replaced the CMOS battery with a used one I had lying around, and which worked in the computer it came out of. I have tested the PSU with a tester to confirm it was good, then tried connecting another PSU just in case--same symptoms. I have even tried a suggestion I found elsewhere on this site wherein one disconnects power from the PSU and then presses the PC's power button twice, thereby "resetting" the PSU. Currently I am trying yet another suggestion: turn it on and wait an inordinate amount of time for POST. Any help would be appreciated.

  Read the article

• Strange performance issue with Dell R7610 and LSI 2208 RAID controller

  - by GregC

  Connecting controller to any of the three PCIe x16 slots yield choppy read performance around 750 MB/sec Lowly PCIe x4 slot yields steady 1.2 GB/sec read Given same files, same Windows Server 2008 R2 OS, same RAID6 24-disk Seagate ES.2 3TB array on LSI 9286-8e, same Dell R7610 Precision Workstation with A03 BIOS, same W5000 graphics card (no other cards), same settings etc. I see super-low CPU utilization in both cases. SiSoft Sandra reports x8 at 5GT/sec in x16 slot, and x4 at 5GT/sec in x4 slot, as expected. I'd like to be able to rely on the sheer speed of x16 slots. What gives? What can I try? Any ideas? Please assist Cross-posted from http://en.community.dell.com/support-forums/desktop/f/3514/t/19526990.aspx Follow-up information We did some more performance testing with reading from 8 SSDs, connected directly (without an expander chip). This means that both SAS cables were utilized. We saw nearly double performance, but it varied from run to run: {2.0, 1.8, 1.6, and 1.4 GB/sec were observed, then performance jumped back up to 2.0}. The SSD RAID0 tests were conducted in a x16 PCIe slot, all other variables kept the same. It seems to me that we were getting double the performance of HDD-based RAID6 array. Just for reference: maximum possible read burst speed over single channel of SAS 6Gb/sec is 570 MB/sec due to 8b/10b encoding and protocol limitations (SAS cable provides four such channels).

  Read the article

• Windows 7 install detects SSD but doesn't list it to install to

  - by Mohamed Meligy

  I'm having quite a weird problem when trying to install Windows 7 SP1 on a new Corsair Force Series 3 SSD to replace a failing HDD in my wife's laptop. When I boot to Windows install, it shows that I have no disks to install to, and tells me to find it a driver to any custom disks I may have. When I go to repair option on the first install window, and then open command prompt Window, I can see the disk using diskpart, and can partition it and format partitions, and then later access them from command prompt and copy files to them. After creating partitions, clicking the "browse" button in Windows install screen that shows no disks available to install Windows to, does show the partitions created by diskpart! So, it does detect the disk and partitions, but refuses to list them as options to install to. People on the Interwebs seem to suggest that just running diskpart "clean" solved the issue for most people, just creating an "active" "primary" partition is al most tutorials suggest. Both got me only as far as described above. The BIOS doesn't have RAID option, changing between "ATA" and "AHCI" (the only available options) didn't make any difference. Might be worth mentioning that this is on a laptop that has Sata III controller for main drive (which I connected the Sata3 SSD to), and Sata II for DVD (which I used for Windows install media). That's what googling brings at least (DELL XPS 15 L502). Any ideas? . Update: The SSD is 460 GB. I tried setting it all as one partition and creating 70-90 GB partition as well (NTFS). More importantly, Windows doesn't list the partition as one it cannot install to (which it does with disks in general when they are small for example). What happens here is different. It doesn't list anything at all. It shows empty list of drives.

  Read the article

• Help building maya render node spec

  - by Ak

  Hi there, I'm looking to build 4x Maya render slaves/nodes for a friend of mine when his project gets green lit. The project involves MentalRay and lots of glass. I'm unsure if the new i7's 9xx or 8xx with hyper threading will do any better than a core 2 quad of the same (or close enough) speed. Does hyper threading make a difference to Maya or is it more performance per core based? I'm sure he's prefer I'd build another render node than pay for a bleeding edge CPU that only adds fractionly more GHz. -- The rest of the spec so far: 4Gb - 8Gb ram 64 bit OS: Probably Windows 7 (I know Linux is free, but want to build something my friend can support himself as easily as he supports his own workstation) 1TB HDD to hold textures, Maya files and renders which will be copied to central storage later Mobo with on-board video, gigabit NIC 500 - 650 watt PSU Desktop case something like a: Cooler Master ATCS 840 The machines will sold afterwards if necessary. -- If anyone has had experience in Maya and has done any tests with the new CPUs vs. the older ones I'd really appreciate your input.

  Read the article

• Our application is responding different on client server

  - by WtFudgE

  I have an application running on our local server and it works perfect. However when I deploy my application to our client's server there are problems. If i copy all the sources to another local from their server, it works fine again.... I am talking about an ASP.NET application talking with windows server 2008. The server specs of our client are: intel Xeon 2.13 GHz 6 GB RAM 300 GB HDD windows server 2008 R2 Although I think it's not that important I will describe the problems I am talking about to give u a better idea: It is related to upating and deleting fields in the sql server. Whenever there is more than one user running the application, and updates or deletes (not even the same record!0, there seems to be fields updating/deleting wrongly. But as I said before, if we copy the source to another server it is not the case. So I assumed it is more configuration related. Do you guys have any idea what the issue could be? Thanks a lot EDIT: my client old me he disabled the sql related accounts Could this be related?

  Read the article

• Windows Server 2008 R2 SP1 Drivers Missing Would Not Install?

  - by bleepzter

  I am building my dev machine with WS2008R2SP1. I consider Windows Server as the best development environment for C# since I tend to focus on server-centric (integration) applications. The desktop flavor of Windows (7) doesn't play nicely with things like Commerce Server or BizTalk... so I to like stick to the environment I develop for. Previously I used to develop inside of VM's but I've found that it is super inefficient and tends to take a toll on the laptops. (I've gone through two of them in 6 months). Problem is that I multiple devices that do not want to be recognized by Windows: My machine is Dell Precision M4500: Intel Core i7-Q740, 1TB HDD, 8GB RAM, Dell re-branded Broadcom DW1501 802x11n Half-Mini Card, Dell re-branded Broadcom DW375 Bluetooh Module, Intel 82577LM Gigabit Network connection NVidia Quadro FX1800 Graphics The devices in question are the Dell rebranded broadcom network and bluetooth adapters: Broadcom USH: USB\VID_0A5C&PID_5800&REV_0101&MI_00 USB\VID_0A5C&PID_5800&MI_00 DW375 Bluetooth Module USB\VID_413C&PID_8187&REV_0517 USB\VID_413C&PID_8187 When I ran the broadcom installers I get "Operating System not supported" which I think is a big oversight on Broadcom's part. Why check for system version string? UGHGHGH Moreover if I try to manually force the driver in windows... I get an error: Driver Management concluded the process to install driver FileRepository\btwampsecfl.inf_amd64_neutral_d8fc2b85d035ed47\btwampsecfl.inf for Device Instance ID USB\VID_0A5C&PID_5800&MI_00\7&66DE6C9&0&0000 with the following status: 0xe0000217. '- or - Driver Management concluded the process to install driver FileRepository\btwampfl.inf_amd64_neutral_d4c4acf036c61299\btwampfl.inf for Device Instance ID USB\VID_413C&PID_8187\90004EEEF5A6 with the following status: 0xe0000217. I googled the 0xe0000217 error code and it says Bad service install section in the driver inf file... Any ideas on how to fix this? I also tried the post by BetaIQ on MSDN Forum, unfortunately the links to the driver package included in the post were dead :( PS. On a side note I also do mobile development for Android, iOS, and Windows Phone, and BB. Having the bluetooth is quite useful with mobile devices.

  Read the article

• How to add a Linux Partition on FreeBSD

  - by Ömer

  Today I installed FreeBSD 9.0 PPC on my Mac mini G4 with 40GB HDD. During installation, (using the FSBD utility 'gpart') I have allocated a total of about 23GB for FreeBSD leaving 17GB totally free (neither partitioned, nor formatted) for a later Linux installation. Now, when try to install Linux (Ubuntu 10.10 PPC) on the remaining 17GB, the Linux/Ubuntu installer (or Linux's Disk Utility for the same matter) wants presumably a linux partition and when I try to add a (Linux) partition on that area using Linux DU it fails with this message: Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/hda, start=23363101696, size=16644660224, type= Entering MS-DOS parser (offset=0, size=40007761920) No MSDOS_MAGIC found Exiting MS-DOS parser Entering Apple parser Mac MAGIC found, block_size=512 map_count = 17 Leaving Apple parser Apple partition table detected containing partition table scheme = 2 got it Error: The partition's data region doesn't occupy the entire partition. ped_disk_new() failed Now, I'm trying to add a Linux partition on FreeBSD running on the harddisk. I use seemingly most suitable tool for this job: gpart. Here is the 'gpart show ad0' But it seems unable to add a Linux partition because "man gpart" doesn't list either "Linux Partition" nor anything like Ext2 or Ext3/Ext4. The closest thing to Linux Partition in gpart is "mbr" but it doesn't work: #gpart add -t mbr ado So, how to add properly a Linux Partition on FreeBSD? Thanks.

  Read the article

• Do I need liquid cooling?

  - by Mrrvomun

  I'm building a computer mainly for gaming and developing games. It's going to be a three screen system with two GeForce GTX 460's and a quad-core i7. The newegg wattage calculator says I need around 900W. The case I intend to get is this one. Full specs if you need 'em are at the end of this post. I have no intentions to overclock the system at the moment, but this may change in the future. I've done a lot of research on the subject, and the answers I've found indicate that it takes a heck of a lot of power to require liquid cooling, and most non-overclocked systems don't need it. But I haven't seen a question about a system with two GPU's, so I ask you the following two questions: Assuming that the system is used for gaming for very extended periods of time (say 4-6 hours at a time, nonstop) with all three screens running at full 1080p, would the fans installed in the system suffice? Or would I need more fans and/or liquid cooling? If the system is used under the same circumstances as above, and is overclocked to a reasonable level, would the fans installed in the system suffice? Or would I need more fans and/or liquid cooling? Specs: Intel Core i7 16GB DDR3 Two nVIDIA GeForce GTX 460 3TB HDD Two DVD-RW writers Thermaltake 1050W power supply Case is linked above

  Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >