Search Results

Search found 11565 results on 463 pages for 'device orientation'.

Page 74/463 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

• Ubuntu 10.04 recognizing USB 2.0 external HD as USB 1.1

  - by btucker

  When I connect the USB 2.0 drive I see this: usb 1-4.3: new full speed USB device using ohci_hcd and address 5 so I know it's getting seen as USB 1.1. usb-devices shows that it really is USB 2.0 and connected to a USB 2.0 hub: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05e3 ProdID=0608 Rev=77.61 S: Product=USB2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=13fd ProdID=1340 Rev=02.10 S: Manufacturer=Generic S: Product=External C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage It seems the problem is that root hub is: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=02.06 S: Manufacturer=Linux 2.6.32-25-server ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub And there's no mention of ehci_hcd. lsusb -t gives me: /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/10p, 12M |__ Port 4: Dev 2, If 0, Class=hub, Driver=hub/4p, 12M |__ Port 2: Dev 4, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 3: Dev 5, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 6: Dev 3, If 0, Class=stor., Driver=usb-storage, 12M It seems like I'm missing something which would allow the OS to see USB 2.0 devices. Can anyone point me in the right direction? EDIT Full lsusb -v output: Bus 001 Device 005: ID 13fd:1340 Initio Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x13fd Initio Corporation idProduct 0x1340 bcdDevice 2.10 iManufacturer 1 Generic iProduct 2 External iSerial 3 57442D574341595930323337 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x05e3 Genesys Logic, Inc. idProduct 0x0608 USB-2.0 4-Port HUB bcdDevice 77.61 iManufacturer 0 iProduct 1 USB2.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00e0 Ganged power switching Ganged overcurrent protection Port indicators bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0103 power enable connect Port 3: 0000.0103 power enable connect Port 4: 0000.0100 power Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.32-25-server ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:02.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 10 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0103 power enable connect Port 5: 0000.0100 power Port 6: 0000.0103 power enable connect Port 7: 0000.0100 power Port 8: 0000.0100 power Port 9: 0000.0100 power Port 10: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled

  Read the article

• if there are multiple kernel module can drive the same device, what is the rule to choose from them?

  - by Dyno Fu

  both pcnet32 and vmxnet can drive the device. $ lspci -k ... 02:01.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 10) Subsystem: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] Flags: bus master, medium devsel, latency 64, IRQ 19 I/O ports at 2000 [size=128] [virtual] Expansion ROM at dc400000 [disabled] [size=64K] Kernel driver in use: vmxnet Kernel modules: vmxnet, pcnet32 both kernel modules are loaded, $ lsmod | grep net pcnet32 32644 0 vmxnet 17696 0 mii 5212 1 pcnet32 as you see, kernel driver in use is vmxnet. is there any policy/algorithm in kernel how to choose from the candidates?

  Read the article

• Can dd-wrt or tomato keep track of GB usage per billing period per device?

  - by Sam Hasler

  I want to be able to track the usage of each device connecting to our router so we can split up the ISP bill by usage. Can dd-wrt or tomato provide the stats I'd need to do this? Update: After a bit of googling I'm aware of a much better answer than the current one. However I suspect there's probably more answers out there for other firmwares so in the interests of getting a more diverse set of answers—­and, I'll admit, because I'm getting tired of reading through obtuse firmware documentation—I've put up a bounty. If the only answer added is the one I've found I'll be happy to accept it for the bounty, otherwise I'll add it and accept it myself, but I'm hoping for an even better answer, or at least some options for other firmwares as from looking I've seen a few other people have asked for this and there doesn't appear to be a definitive answer, let's make this it! Go lazywebs! (Sorry. I've always wanted to say that.)

  Read the article

• How do I recover lost/inacessible data from my storage device?

  - by TomWij

  What steps can I take to try to recover lost or inaccessible data from any storage device? Answers: This applies to any main storage devices; eg. internal/external hard drive, USB stick, Flash memory. The most important thing is to STOP using it, any type of I/O can ruin your chances of a recovery. Click here in case you suspect corruption or bad sectors. Click here in case you suspect mechanical issues.

  Read the article

• Generating Dynamic web pages without server side scripting

  - by Microkernel

  Hi guys, I am trying to control a media device which has lot of multimedia content that it can play using another device(remote control device) like an ipad connected to the LAN. (UPnP) I want the media device to be able to send the content listing to the remote device so that it will be rendered as a webpage on the remote controller. And actions on the webpages needs to be sent to the the device as commands to execute (like play, pause, next etc). The media device is an embedded device, hence can't have any server side scripting, all has to be done on the client side. I want the page rendered to be HTML5. So, is it possible to generate dynamic HTML5 pages using just client side scripting? Thanks a lot. I am an embedded systems developer hence clueless about the web designing stuff.

  Read the article

• Porting a GUI from a pc to a wince device - issue is with the size of the screen

  - by ame

  I have to port a GUI that is currently running on a pc, to a wince device. I have already compiled the code on a win CE platform, the problem is now with the size of the screen of the device which is smaller than some of the dialog boxes of the GUI. I could resize some them in resource view of visual studio 2005. I am unable to proceed further as a lot of screens have bitmaps mapped to them and i cannot just resize the dialog boxes without changing the corresponding bitmaps. What is the best way to proceed- my last resort would be to disable the bitmaps and redraw them at a later stage. is there some method of automatically mapping the size of the screen to all the dialog boxes so that they would automatically resize (alongwith the assocaiated buttons etc)

  Read the article

• Why doesn't Ubuntu show my wireless device after updating the kernel?

  - by Jigar Shah

  After an kernel update Ubuntu doesn't show my wireless device. How can I fix this? I checked the syslogs and it says the following: 2010-02-16 19:25:39,913 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver 2010-02-16 19:25:39,940 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:25:46,066 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:25:46,086 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:25:46,162 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:05,451 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:05,480 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:05,506 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:12,496 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:19,870 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:23,398 WARNING: modinfo for module wl failed: ERROR: modinfo: could not find module wl 2010-02-16 19:35:23,399 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver 2010-02-16 19:35:23,432 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted

  Read the article

• Can't mount home after trying to resize (bad geometry: block count exceeds size of device).

  - by Lynn

  This is on a fresh computer (super computer actually). It got to me with 15T on the home mount and 50G on the root. I tried allocating 7T to root and resizing (since I'm putting a local yum repo on this machine as it has no internet access nor will it ever). I tried following the instructions here: Centos 6.3 disk space allocation but something went wrong and the home won't mount again. Instead I get from dmesg | tail: EXT4-fs (dm-2): bad geometry: block count 4294967295 exceeds size of device (1342177280 blocks) df -h nets this output: Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup-lv_root 7.0T 3.6G 6.6T 1% / tmpfs 190G 216K 190G 1% /dev/shm /dev/sda1 485M 38M 422M 9% /boot I didn't have any files on /dev/mapper/VolGroup-lv_home. Will simply running mke2fs fix it to be mountable? What sort of options should I run it with. I've never resized volumes before or used mke2fs. I don't want to make this mess worse.

  Read the article

• How do I unmount a charging device in Linux?

  - by PeanutsMonkey

  I have a mobile device attached via USB to a Linux box and wish to unmount it. I ran the command fdisk -l however it does not list a mount point. I then ran the command lsusb which yielded the screenshot below. I then proceeded to search the /dev/disk/by-id directory and was found the following file The file is a symbolic link to what appears to be /dev/sdc Questions Why does it not appear when I run the command fdisk -l? How do I unmount it properly without simply yanking the USB cord from the USB port?

  Read the article

• Is there a way to hide the Android Device Chooser?

  - by janfsd

  Whenever I run my app I get the Android Device Chooser dialog: This is happening because I am using the Google APIs for 1.6 and trying to run the application on my Nexus one. Is there any way to make this automatically, or to not check the compatibility? Sometimes when I make a modification and quickly after I save and run the application, Eclipse will build the project and the Android Device Chooser dialog will show briefly and disappear and the app won't run. I have to click run again for it to work. Any workarounds?

  Read the article

• How can I make my Virtualbox Vista see my USB device (iPad)?

  - by phil

  I have the latest VirtualBox. I have filters for the iPad. But it does not show up in my virtual Windows vista My Computer screen or virtual iTunes. When I try to right click the little USB icon and select it it says it failed because the device is busy with a previous request Result code: E_INVALIDARG (0X80070057) Component: HostUSBDevice Interface: IHostUSBDevice {173b4b44-d268-4334-a00d-b6521c9a740a} Callee: IConsole {515e8e8d-f932-4d8e-9f32-79a52aead882} Any help is greatly appreciated Note: running 64bit Windows Vista Virtual on a 64bit Windows Vista (Home Premium) EDIT: my iPad is in recovery mode, maybe why it can't be seen in virtualbox? Also my host is running Zonealarm firewall and Microsoft Security Essentials. In addition the guest has AVG antivirus. Could those programs conflict with virtualbox?

  Read the article

• How to scan for available networks for Blackberry device from application?

  - by amsiddh

  Hi All, Is there any RIM API available which will help to get the list of available network service or only Wi-Fi networks for a device and set selected network access point for any network communications? Is it possible programmatically to disable the Mobile networks like GPRS, WAP, etc? For Ex: When a application is started it should scan for WiFi connections (even if there are no previous WiFi network access points are set on device) and list the available WiFi connection. Then user will select the appropriate WiFi connection to connect for any network communication. Outside the application any internet communication (like browser or any other application) should done through same selected WiFi connection. The scanning for WiFi and setting the connection is almost similar to Blackberry WiFi Setup. If anyone know how to implement this using available RIM API and let me know its possible or not. Please share if anyone have any code snippet related to this. I am looking for OS v4.5, 4.7, and 5.0. Thanks, siddh.

  Read the article

• How can I retrieve data from a Western Digital Passport External Disk which is not getting recognized but getting shown as healthy in Device manager

  - by Rabimba Karanjai

  When I plug in this external harddisk It is not getting shown in the My Computer. But it gets shown perfectly well in the Device Manager When I go into the Computer Administrative panel and into the disk manager it asks me to initialize the disk Now when I try to initialize it, regardless of the method I try it shows me an error "Incorrect Function" As you can see windows tells me it is working properly. Is there anyway I can retrieve data from this?/access it? I have googled and it seems to be a frequent problem with WD drives. Anyone has any solutions on how I can get the data back?

  Read the article

• Multiple Graphics Cards on Fedora 15 (Gnome 3)

  - by Michael

  I have the (delightful) misfortune of having 3 graphics cards. They are XFX Radeon 5750s. Each drives 2 monitors via dvi. I am having a really hard time getting these running on fedora 15 (gnome 3). So my setup is 3 columns of 2 monitors (the upper monitor is mounted upside down in each column to reduce the bezel between monitors). When the (graphical) login screen comes up all 6 have the blue stripey background that must be the default, but then when I login, things get interesting. In the xorg.conf below, you will see only 2 of the screens in the serverlayout while the other 4 are commented out. Logging in with only 2 of the screens active works well (and it even remembers that the top one is upside down, and should be considered above the lower, i am not sure where it stores this info, but i set it using the graphical "Displays" settings) However, as soon as I uncomment a third screen, or more, it gives me an error message when I login. It's one of those friendly, less helpful messages (Oh no! Something has gone wrong. A problem has occurred and the system can't recover. Please log out and try again). If i do not use an xorg.conf, then the "Displays" prefs pane shows only the two monitors on one of my graphics cards Thanks to anyone who can help me get going! (xorg.conf and then lspci below, and xorg log) xorg.conf Section "ServerLayout" Identifier "X.org Configured" Screen "Screen0" 0 0 Screen "Screen1" Below "Screen0" # Screen "Screen2" RightOf "Screen0" # Screen "Screen3" RightOf "Screen1" # Screen "Screen4" RightOf "Screen3" # Screen "Screen5" RightOf "Screen4" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "catalogue:/etc/X11/fontpath.d" FontPath "built-ins" EndSection Section "Module" Load "record" Load "dri" Load "dbe" Load "extmod" Load "dri2" Load "glx" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor3" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor4" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor5" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" Identifier "Card0" Driver "radeon" BusID "PCI:4:0:0" EndSection Section "Device" Identifier "Card1" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Card2" Driver "radeon" BusID "PCI:6:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card0" Monitor "Monitor1" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Card1" Monitor "Monitor2" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Card1" Monitor "Monitor3" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen4" Device "Card2" Monitor "Monitor4" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen5" Device "Card2" Monitor "Monitor5" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection lspci output follows [tgm@tgm ~]$ lspci 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 02:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:02.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 04:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 04:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 05:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 05:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 06:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 06:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) xorg log (posted to fpaste due to how long it is. thanks to marcusw for the request) http://www.fpaste.org/r5ww/ xorg log with all 6 monitors enabled in xorg.conf (they all turn on and have blue, but then one gets the aforementioned user-friendly error message). http://www.fpaste.org/X63H/

  Read the article

• Reverse lookup of inode/file from offset in raw device on linux and ext3/4?

  - by lilinjn

  In linux, given an offset into a raw disk device, is it possible to map back to an partition + inode? For example, suppose I know that string "xyz" is contained at byte offset 1000000 on /dev/sda: (e.g. xxd -l 100 -s 1000000 /dev/sda shows a dump that begins with "xyz") 1) How do I figure out which partition (if any) offset 1000000 is located in?(I imagine this is easy, but am including it for completeness) 2) Assuming the offset is located in a partition, how do I go about finding which inode it belongs to (or determine that it is part of free space) ? Presumably this is filesystem specific, in which case does any one know how to do this for ext4 and ext3?

  Read the article

• Why obfuscating a serial number of a device? What is the risk?

  - by Horst Walter

  In one of my xx.stackexchange questions I've got an answer, in which the user has obfuscated his disk's SN (serial number). Recently I have seen this in several photos as well, the SN was blurred out. I' am just curious, because I have never paid attention to this. What could be the potential risk in publishing a device's SN? I do see some sense when it comes to a MAC address, OK, this could be used for tracking. But a SN of a disk, iPad, whatsoever? Maybe there is an important reason for not publishing it, which I haven't seen so far.

  Read the article

• Is there a Perl wrapper for the Human interface device (HID)?

  - by oren

  Does anyone know if there a wrapper library over Human interface device library on Perl?

  Read the article

• Is there a free program that can detect which device on my network is causing lag?

  - by malfy

  I'm on a small business network, and rarely we experience really extreme latency. I have no idea what device might be causing the lag, and wanted to know if there was a piece of software that could detect it. I know about some softwares like wireshark, which maybe do what I'm asking? If so it's too complicated to understand. I run the program and I have no idea what I'm looking at, or what parameters to give it. So something that can monitor traffic, as well as describe it in such a way that even a not so network savvy individual can interpret.

  Read the article

• can anyone use my application.app file to install the app in his device.

  - by uttam

  is this possible that anyother person run the app on the his device by taking my application.app file.

  Read the article

• UIWebView Loading content properly on iOS 6 simulator but not on device?

  - by David Hegner

  I have encountered a weird bug with a released app. My UIWebView is no longer loading content on iOS 6, yet the content still displays in the simulator. The activity indicator displays properly but then it loads a blank url? Again, this only happens on a device, not on the simulator. To provide extra context (in the simulator the NSURLRequest is assigned the proper URL. When run on a device the value is nil.) Here is my code : -(void)loading { if(!self.webView.loading) [self.activityIndicator stopAnimating]; else { [self.activityIndicator startAnimating]; } } - (void)viewDidLoad { [self.webView addSubview:self.activityIndicator]; NSURLRequest *requestUrl = [NSURLRequest requestWithURL:self.url]; [self.webView loadRequest:requestUrl]; self.timer = [NSTimer scheduledTimerWithTimeInterval:(1.0/2.0) target:self selector:@selector(loading) userInfo:nil repeats:YES]; [super viewDidLoad]; NSLog(@"%@", requestUrl); }

  Read the article

• How can I retrieve "remembered"(stored) wi-fi password from a win. 7 device?

  - by user180880

  I have access to PC, and I am a standard user. Everything(incl. "show charecters" tickbox at wiriless menu) requires admin access. Now, that said machine is actually like a big tv with touch. Type-stuff is handled by virtual keyboard of windows. I can reach to c:\ProgramData\Microsoft\Wlansvc\Profiles\Interfaces and can see-open files there, which is I assume where passwords stored are. Now the problem is that these passwords is encypted. I'm ok with if there is a way with changing/resetting admin password as well. Considering this device has nothing but massive amounts of usb(yep, not even cd-dvd // rw) the only way is from inside or with usb without admin rights.

  Read the article

• Can SQLite file copied successfully on the data folder of an unrooted android device ?

  - by student

  I know that in order to access the data folder on the device, it needs to be rooted. However, if I just want to copy the database from my assets folder to the data folder on my device, will the copying process works on an unrooted phone? The following is my Database Helper class. From logcat, I can verify that the methods call to copyDataBase(), createDataBase() and openDataBase() are returned successfully. However, I got this error message android.database.sqlite.SQLiteException: no such table: TABLE_NAME: when my application is executing rawQuery. I'm suspecting the database file is not copied successfully (cannot be too sure as I do not have access to data folder), yet the method call to copyDatabase() are not throwing any exception. What could it be? Thanks. ps: My device is still unrooted, I hope it is not the main cause of the error. public DatabaseHelper(Context context) { super(context, DB_NAME, null, 1); this.myContext = context; } public void createDataBase() throws IOException{ boolean dbExist = checkDataBase(); String s = new Boolean(dbExist).toString(); Log.d("dbExist", s ); if(dbExist){ //do nothing - database already exist Log.d("createdatabase","DB exists so do nothing"); }else{ this.getReadableDatabase(); try { copyDataBase(); Log.d("copydatabase","Successful return frm method call!"); } catch (IOException e) { throw new Error("Error copying database"); } } } private boolean checkDataBase(){ File dbFile = new File(DB_PATH + DB_NAME); return dbFile.exists(); } private void copyDataBase() throws IOException{ //Open your local db as the input stream InputStream myInput = null; myInput = myContext.getAssets().open(DB_NAME); Log.d("copydatabase","InputStream successful!"); // Path to the just created empty db String outFileName = DB_PATH + DB_NAME; //Open the empty db as the output stream OutputStream myOutput = new FileOutputStream(outFileName); //transfer bytes from the inputfile to the outputfile byte[] buffer = new byte[1024]; int length; while ((length = myInput.read(buffer))>0){ myOutput.write(buffer, 0, length); } //Close the streams myOutput.flush(); myOutput.close(); myInput.close(); } public void openDataBase() throws SQLException{ //Open the database String myPath = DB_PATH + DB_NAME; myDataBase = SQLiteDatabase.openDatabase(myPath, null, SQLiteDatabase.OPEN_READONLY); } /* @Override public synchronized void close() { if(myDataBase != null) myDataBase.close(); super.close(); }*/ public void close() { // NOTE: openHelper must now be a member of CallDataHelper; // you currently have it as a local in your constructor if (myDataBase != null) { myDataBase.close(); } } @Override public void onCreate(SQLiteDatabase db) { } @Override public void onUpgrade(SQLiteDatabase db, int oldVersion, int newVersion) { } }

  Read the article

• iPhone:Can binaries developed in Xcode 3.1.3 be deployable on iPhone 3.1.3 device?

  - by user187532

  Hi, Sorry to ask you such a basic question. I am facing some problem here, so that is why asking this question. I have Xcode 3.1.3 and developed an application. I am trying to install this binary with proper provisional profile onto iPhone 3G 3.1.3 device on another windows computer. But i'm unable to install on the device through iTunes. Can binaries developed using Xcode 3.1.3 be able to install on iPhone 3.1.3 version devices right? Please advise. Thanks.

  Read the article

• how to read the contents of a file In Erlang ?

  - by Zubair

  I know you can do something like this: readlines(FileName) -> {ok, Device} = file:open(FileName, [read]), get_all_lines(Device, []). get_all_lines(Device, Accum) -> case io:get_line(Device, "") of eof -> file:close(Device), Accum; Line -> get_all_lines(Device, Accum ++ [Line]) end. : Is there a one liner BIF that can do this too?

  Read the article

• Control Android phone via bluetooth

  - by user861973

  I have a Samsung Bluetooth device. Using the device I can pair it with my Android phone and I can listen to music from my Samsung Bluetooth device which is playing on the Android device. I am not installing any software on my android device. Now my question is how can the Samsung Bluetooth device control the Android music player and also incoming calls? Remember I am not installing any software on the Android device. FYI: I can connect the Samsung Bluetooth device to any phone like a Nokia, iPhone, Android etc. but I want to know about Android.

  Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >