Search Results

Search found 11772 results on 471 pages for 'fit pc'.

Page 74/471 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

  • Port Forwarding to put my web server on The Internet

    - by Chadworthington
    I went to http://canyouseeme.org/ to check to see what my external IP address. Regardless of what port I enter, it tells me that the port is blocked. I have a LinkSys router that basically has the default settings with the exception that I have WEP encrptin setup and I have forwarded a few ports, including 80 and 69. I forwarded them to the 192.x.x.103 IP address of the PC which is running IIS. That PC runs Symantec Endpoint Protection, which I right mouse clicked in the tray to Disable. These steps used to make my PC visible so I could host my own web site in IIS on port 80, or some other port, like 69. Yet, the Open Port tool cannot see my IP when it checks eiether port and when I navigate to http://my external ip/ I get "page cant be displayed" At first I was thinking that maybe Comcast is blocking port 80, but 69 doesnt work eiether. I do not see any other blockking set up in my router and, as I mentioned, I went with teh defaults except where discussed. This is a corporate PC and Symantec End Point Protecion is new to it (this previously worked on teh same PC with Symantec Protection Agent), but I thought that disabling Sym End Pt from the tray, that that would effectively neutralize it. I do not have the rights to kill the program itself. Any suggestions on what else to try to make my PC externally visible?

    Read the article

  • Git clone/pull across local network

    - by Tom Sarduy
    I'm trying to clone/pull a repository in another PC using Ubuntu Quantal. I have done this on Windows before but I don't know what is the problem on ubuntu. I tried these: git clone file:////pc-name/repo/repository.git git clone file:////192.168.100.18/repo/repository.git git clone file:////user:pass@pc-name/repo/repository.git git clone smb://c-pc/repo/repository.git git clone //192.168.100.18/repo/repository.git Always I got: Cloning into 'intranet'... fatal: '//c-pc/repo/repository.git' does not appear to be a git repository fatal: The remote end hung up unexpectedly or fatal: repository '//192.168.100.18/repo/repository.git' does not exist More: The other PC has username and password Is not networking issue, I can access and ping it. I just installed git doing apt-get install git (dependencies installed) I'm running git from the terminal (I'm not using git-shell) What is causing this and how to fix this? Any help would be great! UPDATE I have cloned the repo on Windows using git clone //192.168.100.18/repo/intranet.git without problems. So, the repo is accessible and exist! Maybe the problem is due user credentials?

    Read the article

  • Can not boot windows XP from cloned hard disk - what can I do?

    - by Martin
    My configuration: a PC (some years old) with MSI K8N-Neo-4F Motherboard, 1 GB RAM. Disk 1 (Maxtor, SATA II, 250 GB): 2 Partitions, on Partition 1 (48 GB): Windows XP Professional (NTFS) on Partition 2 (190 GB): data (NTFS) I wanted to have a larger and faster disk (the PC is incredibly slow and permanently the disk is rattling when I try to open an application or during Windows startup), so I took Disk 2 (Seagate, Sata II, 500 GB), installed in the PC, created at first a 400 GB-partition at the end of the disk and cloned the data to it, which worked well Installed a swap partition and a partition for Ubuntu Linux 12.10 on the first "part" of the disk so I was able to boot Linux and the old Windows XP with the Linux "System selection" at startup. Now I wanted to move Windows XP to the new disk, deleted the Linux partitions cloned Windows XP to the new disk (with free tools - EASESUS), left both disks in the PC and tried to select the new hard drive during boot as boot partition. This did not work, the PC refused to boot from this second disk. I tried many things like making the boot partition on the 2nd drive "active" in the Windows System Preferences modifying the boot.ini file to boot from the second disk - tried to boot from it, but ended with an error message stating that it was not possible to boot from this disk because of a hardware failure or something else or so removing the original disk and plugging the new one on the same SATA port as the original one - also booting failed with an error message repairing the MBR by booting into recovery mode from the Windows XP Installation CD-ROM, selecting the second disk and doing "FIXMBR" which said that everything was fine with the MBR. after that at least the PC tried to boot from the newer disk and then startup was hanging during the blue screen with the Windows Logo.... no luck. ... deleting the cloned partition and cloning again - this time with Macrium Reflect Free version... - no success during booting. I tried a lot of things with no success, so I wonder what I am doing wrong?! What could I do to successfully clone my Win XP partition to replace the original disk by a larger one which is bootable.

    Read the article

  • Computer making strange sound when turned on, ever since power outage

    - by Dot NET
    Recently we experienced a power outage, and the PC was off. However, once the power came back, I switched on the PC and heard a strange noise - almost as if the hard disk or fans were struggling to work. I can't really describe the sound, but it's a laboured, loud sound almost like a jack-hammer. This has been persisting ever since the power outage, however the noise stops after around 10 minutes or so, and doesn't start again until the computer is turned off and on again. At first I thought it had something to do with the HDD, but all my files are intact, chkdsk did not report any issues and performance is 100% unchanged, even in games (so the gfx card is fine, and so is the HDD most likely). My PC setup basically has around 3 cooling fans, but I'm not sure if it's one of these either as the noise actually stops after 10 minutes or so, and if I leave the PC on for 4 hours (for example) the noise never starts again. It's there solely when turning on the PC. I haven't got a UPS, and it's important to note that the computer was not on when the power went out - it was merely plugged in. I then promptly unplugged the PC once the power was out, and only plugged it in again when the power came back. Could it be the power supply? Unfortunately I can't open my tower as I would void the warranty. Are there any tests which I could carry out without voiding the warranty?

    Read the article

  • 2 routers at home- how to connect with VNC?

    - by Charles Leviton
    I have two routers at home. First router is upstairs and is connected to the cable modem. 2nd router is downstairs and acts as "signal booster" for the 1st router. Devices connected to the upstairs router have IP addresses of the form 192.168.1.n Devices connected to the upstairs router have IP addresses of the form 192.168.2.n. I blindly followed instructions from a website to do this set up, just glad it works! Upstairs I have a PC running Win 7 64 bit. Its assigned IP is 192.168.1.7. I have a VNC viewer running on this. Downstairs I have a 2nd PC running Vista 32 Home edition bit that is connected to the 2nd router and has IP Address 192.168.2.114. VNC server is running on this. It's listening on 5900. There is no firewall. When I try to connect to this downstairs PC from upstairs it fails with message "Failed to connect to server". I cannot ping to this either. If I try to connect to this downstairs PC using VNC Viewer from another computer that's connected to the same downstairs router then it works like a charm. So what's the work around if the viewer is on a different "network"? I don't have any problems doing remote desktop connection from the downstairs PC to the upstairs PC even if they are connected to different routers. Router information- Upstairs- ASUS RTN13U, downstairs- DD-WRT v24 RC-5 Thanks! P.S. I posted this on the Ultra VNC forum as well but that doesn't seem to have a lot of activity, so taking the liberty to multipost.

    Read the article

  • USB ports causing Wireless and Mobile Phone tethering drop out

    - by chrolli
    I have a problem with my USB ports and I can't seem to pinpoint the problem. I'm hoping that I can get some idea as to how to troubleshoot my problem. Problem description: I recently bought a USB Wireless Adapter in order to connect my Desktop PC to the WLAN. The dongle keeps dropping off connection regularly on average once a minute. And the connection is slow. What I've tried: I installed a network scanner to determine signal strength. The PC/adapter combo is getting about 70% signal strength. I have a laptop that has an internal Wireless adapter. I moved the laptop near the location of the PC. The signal strength was above 90%. I installed the USB adapter on the laptop. I placed the laptop near the location of the PC. The signal strength was above 80%. And there is no drop out issue. I've isolated the problem to be on the PC. I used internet tethering on my mobile phone in order to test the USB ports. I get the same problem, themobile phone keeps dropping in and out. I plugged the adapter and phone on all USB ports, and it is still dropping out on all ports. I've isolated the problem to be the Motherboard, USB hub. I updated the BIOS, and USB driver. Still dropping out. I noticed that when I used the mobile phone tethering method, the phone (iphone 5) is guarenteed to drop out and does not appear to charge if I jiggle the the 8-pin connector on the base of the phone. If I push the pin tightly on the phone, the phone starts charging, as soon as I let go, it stops and drops out from the PC. This is strange because this doesn't happen when it is plugged to the powerboard. Which means that the 8 pin connector is fine. I'm not sure what the problem is. I assume that it is to do with the USB ports not supplying enough power which in turn causes the devices to intermittently drop out. The reason I say this is because the USB cable works fine when plugged into a powerboard with enough power supplied to the phone. Only when it is plugged into the USB port on the PC, does it drop out. My motherboard is Asus P8z68-v le. My Wireless adapter is the D-link DWA131. I can't seem to find any settings in the BIOS to increase the south bridge voltage so as to supply more power to the USB ports. Although this problem only occurs when I'm trying to hook up to a device supplying internet connection. My USB HDD, Flash drives, and Mouse and Key are working fine! Any suggestions please?

    Read the article

  • Share 3G connection over WiFi-LAN network

    - by kush.impetus
    This is how I have established network between my PC and my laptop at home (being novice in networking, it took me few days to achieve the feat). And it is working perfectly. I can easily share files between them. Laptop IP Address: 192.168.1.4 Subnet mask: 255.255.255.0 Default Gateway: 192.168.1.2 Desktop IP Address: 192.168.1.5 Subnet mask: 255.255.255.0 Default Gateway: 192.168.1.2 ASUS RT-N10+ Router IP Address: 192.168.1.4 Default Gateway: 192.168.1.2 I have connected the Desktop PC to the router using a LAN cable, and laptop to router over WiFi. Both, PC and laptop are running on Windows 7 OS, are on same HomeGroup, have same username / password. Also, I have connected the Ethernet cable to LAN port 1 of the router. Click here to view a graphical representation of the network. Can't post image here, because I don't have 10 reputation points. Now, what I want is use connect to Internet using a 3G USB modem on one device and share it over the network on the other. I tried Huawei and Micromax 3G USB modem. Both obtain a new IP address whenever I connect to Internet (means they have dynamic IPs). Rest, both have Subnet Mask as 255.255.255.255 and Default Gateway as 0.0.0.0. In that case, I cannot directly share Internet from the modem. Preferred DNS is blank for now in both, laptop and PC. What I am planning to do is to connect to Internet on laptop using the 3G modem and share the Internet connection over laptop's Wi-Fi (as hotspot) using Connectify, which I have done already. That, I suppose, will broadcast a static IP to connect to. Now what I can't figure out is that what changes should I make to the network settings of the router and the PC so that PC connects to the Internet broadcast by Connectify? Is that possible on the first hand? Please note that I am trying to implement the network without spending anything extra (for purchasing as USB WiFi adapter for PC, of course, which could have made the life lot easier for me). Thanks in advance

    Read the article

  • VBA: How go I get the total width from all controls in an Access form?

    - by Stefan Åstrand
    Hi, This is probably very basic stuff, but please bear in mind I am completely new to these things. I am working on a procedure for my Access datasheet forms that will: Adjust the width of each column to fit content Sum the total width of all columns and subtract it from the size of the window's width Adjust the width of one of the columns to fit the remaining space This is the code that adjusts the width of each column to fit content (which works fine): Dim Ctrl As Control Dim Path As String Dim ClmWidth As Integer 'Adjust column width to fit content For Each Ctrl In Me.Controls If TypeOf Ctrl Is TextBox Then Path = Ctrl.Name Me(Path).ColumnWidth = -2 End If Next Ctrl How should I write the code so I get the total width of all columns? Thanks a lot! Stefan

    Read the article

  • Cut off text before read more

    - by koko
    I have texts that most of the time fit in a div, but sometimes it doesn't fit. There is no way to determine how many characters/words/paragraphs fit in the div, so I can't cut it off that way. The div had a fixed height and width, so can we do something with that? Or do you have any suggestion how to get everything in the div, the correct way?

    Read the article

  • VBA: How go I get the total width from all controls in an MS-Access form?

    - by Stefan Åstrand
    Hi, This is probably very basic stuff, but please bear in mind I am completely new to these things. I am working on a procedure for my Access datasheet forms that will: Adjust the width of each column to fit content Sum the total width of all columns and subtract it from the size of the window's width Adjust the width of one of the columns to fit the remaining space This is the code that adjusts the width of each column to fit content (which works fine): Dim Ctrl As Control Dim Path As String Dim ClmWidth As Integer 'Adjust column width to fit content For Each Ctrl In Me.Controls If TypeOf Ctrl Is TextBox Then Path = Ctrl.Name Me(Path).ColumnWidth = -2 End If Next Ctrl How should I write the code so I get the total width of all columns? Thanks a lot! Stefan Solution This is the code that makes an Access datasheet go from this: To this: Sub AdjustColumnWidth(frm As Form, clm As String) On Error GoTo HandleError Dim intWindowWidth As Integer ' Window width property Dim ctrl As Control ' Control Dim intCtrlWidth As Integer ' Control width property Dim intCtrlSum As Integer ' Control width property sum Dim intCtrlAdj As Integer ' Control width property remaining after substracted intCtrSum 'Adjust column width to standard width For Each ctrl In frm.Controls If TypeOf ctrl Is TextBox Or TypeOf ctrl Is CheckBox Or TypeOf ctrl Is ComboBox Then Path = ctrl.Name frm(Path).ColumnWidth = 1500 End If Next ctrl 'Get total column width For Each ctrl In frm.Controls If TypeOf ctrl Is TextBox Or TypeOf ctrl Is CheckBox Or TypeOf ctrl Is ComboBox Then Path = ctrl.Name intCtrlWidth = frm(Path).ColumnWidth If Path <> clm Then intCtrlSum = intCtrlSum + intCtrlWidth End If End If Next ctrl 'Adjust column to fit window intWindowWidth = frm.WindowWidth - 270 intCtrlAdj = intWindowWidth - intCtrlSum frm.Width = intWindowWidth frm(clm).ColumnWidth = intCtrlAdj Debug.Print "Totalt (Ctrl): " & intCtrlSum Debug.Print "Totalt (Window): " & intWindowWidth Debug.Print "Totalt (Remaining): " & intCtrlAdj Debug.Print "clm : " & clm HandleError: GeneralErrorHandler Err.Number, Err.Description Exit Sub End Sub Code to call procedure: Private Sub Form_Load() Call AdjustColumnWidth(Me, "txtDescription") End Sub

    Read the article

  • Failed dependency while installing browser Iron(A google chrome clone)

    - by Krishnadas PC
    Installation failed while trying to install Iron browser. [root@localhost softwares]# rpm -ivh iron64.rpm error: Failed dependencies: libc.so.6(GLIBC_2.15)(64bit) is needed by iron64-29.0.1600-2.x86_64 libudev.so.1()(64bit) is needed by iron64-29.0.1600-2.x86_64 libudev.so.1(LIBUDEV_183)(64bit) is needed by iron64-29.0.1600-2.x86_64 and when tried to install using yum it failed also.

    Read the article

  • Get first character of each word and its position in a sentence/paragraph

    - by Radhika
    I am trying to create a map by taking the first character of each word and it's position in a sentence/paragraph. I am using regex pattern to achieve this. Regex is a costly operation. Are there are any ways to achieve this? Regex way: public static void getFirstChar(String paragraph) { Pattern pattern = Pattern.compile("(?<=\\b)[a-zA-Z]"); Map newMap = new HashMap(); Matcher fit = pattern.matcher(paragraph); while (fit.find()) { newMap.put((fit.group().toString().charAt(0)), fit.start()); } }

    Read the article

  • Conversion failed when converting the varchar value to data type int

    - by desi
    *I have a varchar(1000) column declared as field that contains all numbers, as shown below. And I want to execute the following script. I need this to work please Declare @PostalCode varchar(1000)=0 set @PostalCode ='7005036,7004168,7002314,7001188,6998955' Select hl.* From CountryLocation cl INNER JOIN refPostalCodes pc ON pc.PostalCode = hl.PostalCode where pc.Postalcode in (@PostalCode) and pc.notDeleted = 1

    Read the article

  • Is there a comprehensive list of mupdf keyboard shortcuts?

    - by Dune
    I like mupdf's speed, but I am exasperated by the lack of documentation and its (unnecessarily) hyper-minimal interface with not a menu bar or context menu in sight. Does there exist a list of keyboard shortcuts for this application? The link to the manual on the official site is dead. I only know of the following shortcuts: fit to width: Shift + w fit to height: Shift + h Please respond with the shortcuts you know.

    Read the article

  • SQL Server WHERE Clause using Temporary Columns

    - by AbeP
    Hi all, I have the following query, which uses a CASE statement. Is there anyway to add into the where clause WHERE IsBusinessDayFinal = 0? without using a temporary table? thanks so much! SELECT ac.DateTimeValue, CASE WHEN pc.IsBusinessDay IS NOT NULL THEN pc.IsBusinessDay ELSE ac.IsBusinessDay END AS IsBusinessDayFinal, ac.FullYear, ac.MonthValue, ac.DayOfMonth, ac.DayOfWeek, ac.Week FROM [dbo].[AdminCalendar] ac LEFT JOIN [dbo].ProjectCalendar pc ON ac.DateTimeValue = pc.DateTimeValue AND pc.ProjectId = @projectId WHERE ac.DateTimeValue >= @startDate AND ac.DateTimeValue <= @finishDate;

    Read the article

  • Run exe on computer in network through batch file

    - by Peter Kottas
    I have few computers connected to the network and I want to create batch files to automatize the process of working with them. I have already created one used to shutdown computers at once. It is very simple I ll just post it for the sake of argument. @echo off shutdown -s -m \\Slave1-PC shutdown -s -m \\Slave2-PC shutdown -s -m \\Slave3-PC Now I want to execute programs on these machines. So lets say there is "example.exe" file located "\Slave1-PC\d\example.exe" using call \\Slave1-PC\\d\\example.exe runs it on my computer through network and i didn't come up with anything else. I dont want to use any psexec if possible. Help would be much appreciated. Peter

    Read the article

  • How to compute power spectrum from 2D FFT

    - by user1452954
    I've encounter a problem when doing my lab assignment, not sure how to implement this: Use fft2 on a gray image and to do Fourier transform and then compute the power spectrum. This is my code so far: >> Pc = imread('pckint.jpg'); >> whos Pc; Name Size Bytes Class Attributes Pc 256x256 65536 uint8 >> imshow(Pc); >> result = fft2(Pc); My question is from the result. How to computer power spectrum?

    Read the article

  • C/C++ detect network type

    - by Gavimoss
    I need to write a win32 c/c++ application which will be able to determine whether the PC it's running on is connected to one of 2 networks. The first network is the company LAN (which has no internet connection) and the second network is a standalone switch with a single PC connected to it (the PC that the program is running on). I'm pretty new to network programming but so far I have tried testing to see if a network drive which is held on our LAN can be mapped. This works fine if the PC is connected to the LAN, the drive mapping succeeds so so LAN detection is successful. However, if the PC is connected to the switch, this results in a VERY long timeout which is not a suitable as it will delay the program so much as to make it unusable. Does anyone have any alternative suggestions? I'm using c/c++ in VS 6.0

    Read the article

  • Is Memory increase create difference in output or behavior of java application?

    - by Nitz
    Hey Guys I have created one java-swing application. The application runs perfectly runs perfect on my pc. But it doesn't run perfectly on client pc. I had increase my Virtual Memory, earlier on my pc. So my question is.. Is changing memory limit, effect or change application behavior? Is there anything that change the behavior of java application? bcz same application runs perfectly on my pc and same application does not running perfectly on client pc? and there is no problem in code, i have checked three times.

    Read the article

  • Installing the Updated XP Mode which Requires no Hardware Virtualization

    - by Mysticgeek
    Good news for those of you who have a computer without Hardware Virtualization, Microsoft had dropped the requirement so you can now run XP Mode on your machine. Here we take a look at how to install it and getting working on your PC. Microsoft has dropped the requirement that your CPU supports Hardware Virtualization for XP Mode in Windows 7. Before this requirement was dropped, we showed you how to use SecureAble to find out if your machine would run XP Mode. If it couldn’t, you might have gotten lucky with turning Hardware Virtualization on in your BIOS, or getting an update that would enable it. If not, you were out of luck or would need a different machine. Note: Although you no longer need Hardware Virtualization, you still need Professional, Enterprise, or Ultimate version of Windows 7. Download Correct Version of XP Mode For this article we’re installing it on a Dell machine that doesn’t support Hardware Virtualization on Windows 7 Ultimate 64-bit version. The first thing you’ll want to do is go to the XP Mode website and select your edition of Windows 7 and language. Then there are three downloads you’ll need to get from the page. Windows XP Mode, Windows Virtual PC, and the Windows XP Mode Update (All Links Below). Windows genuine validation is required before you can download the XP Mode files. To make the validation process easier you might want to use IE when downloading these files and validating your version of Windows. Installing XP Mode After validation is successful the first thing to download and install is XP Mode, which is easy following the wizard and accepting the defaults. The second step is to install KB958559 which is Windows Virtual PC.   After it’s installed, a reboot is required. After you’ve come back from the restart, you’ll need to install KB977206 which is the Windows XP Mode Update.   After that’s installed, yet another restart of your system is required. After the update is configured and you return from the second reboot, you’ll find XP Mode in the Start menu under the Windows Virtual PC folder. When it launches accept the license agreement and click Next. Enter in your log in credentials… Choose if you want Automatic Updates or not… Then you’re given a message saying setup will share the hardware on your computer, then click Start Setup. While setup completes, you’re shown a display of what XP Mode does and how to use it. XP Mode launches and you can now begin using it to run older applications that are not compatible with Windows 7. Conclusion This is a welcome news for many who want the ability to use XP Mode but didn’t have the proper hardware to do it. The bad news is users of Home versions of Windows still don’t get to enjoy the XP Mode feature officially. However, we have an article that shows a great workaround – Create an XP Mode for Windows 7 Home Versions & Vista. Download XP Mode, Windows Virtual PC, and Windows XP Mode Update Similar Articles Productive Geek Tips Our Look at XP Mode in Windows 7Run XP Mode on Windows 7 Machines Without Hardware VirtualizationInstall XP Mode with VirtualBox Using the VMLite PluginUnderstanding the New Hyper-V Feature in Windows Server 2008How To Run XP Mode in VirtualBox on Windows 7 (sort of) TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Ben & Jerry’s Free Cone Day, 3/23/10 New Stinger from McAfee Helps Remove ‘FakeAlert’ Threats Google Apps Marketplace: Tools & Services For Google Apps Users Get News Quick and Precise With Newser Scan for Viruses in Ubuntu using ClamAV Replace Your Windows Task Manager With System Explorer

    Read the article

  • Sorry about the wait.

    - by Ratman21
    In the last two days have been trying remove “Iolo System Mechanic Professional” (With anti-virus and FireWall) from 3 of the 5 pc’s we have (3 lap tops and two Desk tops) as it was going to expire on the 13th.   So I could replace them with a free anti-virus (AVG) and just use the windows fire wall. I have been using the same set up on one of my desk tops (XP Pro) for 8 months and one of the Lap tops (Vista) for 5 months.   The problem was that System Mechanic did not want to go. Even after using the uninstall option on the desk top (my main PC, well its that because has the larger of all the PC’s hard drives but, is the oldest and runs XP home) and using Ccleaner to try and remove it.  It was still showing up as there and after I went a head and tried installing AVG and ran it. I found that the TCP/IP module was missing.  So no internet, I had to restore the PC back to the 1st to get the module back and then install AVG (after making sure window firewall was back on. I didn’t check that on the first try). Got the PC back to normal, very late last night. Only one of the two lap tops was easy but, even at that there are still some parts of System Mechanic on it but, AVG and firewall are working.   I may try an hunt down parts of System Mechanic on it and delete them on this lap top. Which was what finally had to do on the one of the Lap tops (also XP Home) as it would not uninstall after I restored the PC back to the 4th. So delete, delete, delete and Ccleaner (one dl file would not delete though). And I just finish installing AVG and now running a scan on the lap top. So all of this took two days (well three counting today). I started late Friday night and just finishing up now.   I only started this switch over after I had finished my Job search for day on Friday.   As for blogging on Tuesday, Wednesday and Thursday, I was busy and by the end of the day was too tired to blog, that and was hung up still on that 2nd dare of The Love Dare. So I cleaned the house, while she was out of the house. I mean, I cleaned, not just vacuumed house I cleaned the kitchen counter tops and the sinks. Did the dishes and some of the laundry over two of the those days.   As to the third day of Love Dare which is “Love is not selfish” and the dare “Whatever you put your time, energy, and money into will become more important to you. It’s hard to care for something you are not investing in. Along with restraining from negative comments, buy your spouse something that says, I was thinking of you today.”   Being on a very limited income, a lot of normal guy buying for girls is out (for one thing, the comment why did you waste our money on flowers, etc, etc, would come up. Not from me though). So that one is on hold till money issues are not a problem (no that does not mean never). The 4th day “Love is thoughtful” and the dare “Contact your spouse sometime during the business of the day. Have no agenda other than asking how he or she is doing and if there is anything you could do for them”.   I did this dare while I was still working with census last week and trying to do the dares. Well I start my CCNA classes Monday the 15th and I move on to the next Love Dare day “Love is not rude”.

    Read the article

  • Mutation Problem - Clojure

    - by Silanglaya Valerio
    having trouble changing an element of my function represented as a list. code for random function: (defn makerandomtree-10 [pc maxdepth maxwidth fpx ppx] (if-let [output (if (and (< (rand) fpx) (> maxdepth 0)) (let [head (nth operations (rand-int (count operations))) children (doall (loop[function (list) width maxwidth] (if (pos? width) (recur (concat function (list (makerandomtree-10 pc (dec maxdepth) (+ 2 (rand-int (- maxwidth 1))) fpx ppx))) (dec width)) function)))] (concat (list head) children)) (if (and (< (rand) ppx) (>= pc 0)) (nth parameters (rand-int (count parameters))) (rand-int 100)))] output )) I will provide also a mutation function, which is still not good enough. I need to be able to eval my statement, so the following is still insufficient. (defn mutate-5 "chooses a node changes that" [function pc maxwidth pchange] (if (< (rand) pchange) (let [output (makerandomtree-10 pc 3 maxwidth 0.5 0.6)] (if (seq? output) output (list output))) ;mutate the children of root ;declare an empty accumulator list, with root as its head (let [head (list (first function)) children (loop [acc(list) walker (next function)] (println "----------") (println walker) (println "-----ACC-----") (println acc) (if (not walker) acc (if (or (seq? (first function)) (contains? (set operations) (first function))) (recur (concat acc (mutate-5 walker pc maxwidth pchange)) (next walker)) (if (< (rand) pchange) (if (some (set parameters) walker) (recur (concat acc (list (nth parameters (rand-int (count parameters))))) (if (seq? walker) (next walker) nil)) (recur (concat acc (list (rand-int 100))) (if (seq? walker) (next walker) nil))) (recur acc (if (seq? walker) (next walker) nil)))) ))] (concat head (list children))))) (side note: do you have any links/books for learning clojure?)

    Read the article

  • cannot receive UDP broadcast packets

    - by user292792
    Hello I have 2 boxes: - an embedded device (ARM Omap with linux) which I'll call "Omap". - a PC (can either be Windows or linux). Scenario 1 Both boxes are in the same network (example: my office). The Omap gets its address from a DHCP server (ex: 192.168.10.110). The PC has always the same address (ex. 192.168.10.104). I can successfully exchange UDP broadcast packets on any port. Success. Scenario 2 The 2 boxes are in a network withOUT a DHCP server. The PC has a static IP address (example: 10.10.10.20). The Omap boots, looks for a DHCP server, doesn't find it, and is in what I call "bad IP address" state. Now... Broadcasting UDP packets from the Omap works: the PC can see them. The opposite doesn't work: UDP packets broadcasted by the PC are not seen by the Omap. I am using Wireshark on another PC to verify that the packets are being sent. Failure. I tried to change the Omap ip address (with ifconfig)... no luck. What am I missing? To complete the picture, when the Omap is in Scenario 2, if I run udhcpc ... it can communicate with the DHCP server and get an IP address. I also see the packets with Wireshark. So this means that the DHCP client is able to broadcast UDP packets. (Yes, I tried to use DHCP ports 67/68 but it doesn't work). I am using Boost C++ Asio UDP sockets. Specifically, I took the multicast examples and changed them to do broadcasting. Any help is appreciated. Thanks, Benedetto

    Read the article

  • C++ reference variables

    - by avd
    I have these two functions (with Point2D & LineVector (has 2 Point2D member variables) classes and SQUARE macro predefined) inline float distance(const Point2D &p1,const Point2D &p2) { return sqrt(SQUARE(p2.getX()-p1.getX())+SQUARE(p2.getY()-p1.getY())); } inline float maxDistance(const LineVector &lv1,const LineVector &lv2) { return max(distance(lv1.p1,lv2.p2),distance(lv1.p2,lv2.p1)); } but it gives compilation error in maxDistance() function (line 238) saying: /usr/lib/gcc/i686-pc-cygwin/3.4.4/include/c++/bits/stl_iterator_base_types.h: In instantiation of `std::iterator_traits<Point2D>': quadrilateral.cpp:238: instantiated from here /usr/lib/gcc/i686-pc-cygwin/3.4.4/include/c++/bits/stl_iterator_base_types.h:129: error: no type named `iterator_category' in `class Point2D' /usr/lib/gcc/i686-pc-cygwin/3.4.4/include/c++/bits/stl_iterator_base_types.h:130: error: no type named `value_type' in `class Point2D ' /usr/lib/gcc/i686-pc-cygwin/3.4.4/include/c++/bits/stl_iterator_base_types.h:131: error: no type named `difference_type' in `class Point2D' /usr/lib/gcc/i686-pc-cygwin/3.4.4/include/c++/bits/stl_iterator_base_types.h:132: error: no type named `pointer' in `class Point2D' /usr/lib/gcc/i686-pc-cygwin/3.4.4/include/c++/bits/stl_iterator_base_types.h:133: error: no type named `reference' in `class Point2D' Please suggest what is the error?

    Read the article

  • NHibernate: Using value tables for optimization AND dynamic join

    - by Kostya
    Hi all, My situation is next: there are to entities with many-to-many relation, f.e. Products and Categories. Also, categories has hierachial structure, like a tree. There is need to select all products that depends to some concrete category with all its childs (branch). So, I use following sql statement to do that: SELECT * FROM Products p WHERE p.ID IN ( SELECT DISTINCT pc.ProductID FROM ProductsCategories pc INNER JOIN Categories c ON c.ID = pc.CategoryID WHERE c.TLeft >= 1 AND c.TRight <= 33378 ) But with big set of data this query executes very long and I found some solution to optimize it, look at here: DECLARE @CatProducts TABLE ( ProductID int NOT NULL ) INSERT INTO @CatProducts SELECT DISTINCT pc.ProductID FROM ProductsCategories pc INNER JOIN Categories c ON c.ID = pc.CategoryID WHERE c.TLeft >= 1 AND c.TRight <= 33378 SELECT * FROM Products p INNER JOIN @CatProducts cp ON cp.ProductID = p.ID This query executes very fast but I don't know how to do that with NHIbernate. Note, that I need use only ICriteria because of dynamic filtering\ordering. If some one knows a solution for that, it will be fantastic. But I'll pleasure to any suggestions of course. Thank you ahead, Kostya

    Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >