Search Results

Search found 12488 results on 500 pages for 'hardware upgrade'.

Page 74/500 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

• How to rescue from an SD (SDHC) card that I can't reformat (possible hardware failure)

  - by sbwoodside

  I have a transcend 16GB SDHC card and a lot of photos on it that I'd like to recover. When I plug it into the SD card reader, it takes a while for the Mac to even recognize that there's a disk present, and it shows up as 1.07GB with geometry 520/64/63 (according to fdisk). First I tried file recovery: PhotoRec: no files are found (the images are in CR2 format and I'm using testdisk-6.14-WIP which claims to recognize that format under TIF) dd / ddrescue: they create a 1.07GB image, same problem as above TestDisk: doesn't find any partitions to recover I found a source saying that the correct geometry for this type of SD Card is Heads 255, Sectors/Track 63, Cylinders 1953, so I tried manually setting that geometry in PhotoRec/TestDisk. No improvement. Next I tried formatting the disk with fdisk. After writing and quitting, I ran fdisk again and it reported that the new format hadn't been saved on the disk. I also tried resetting the format/partitions with TestDisk and that failed also. The fdisk log is below. I don't really care about the card, I've already ordered a new SanDisk card. But I'd like to get the data off. Maybe, is there any way to force dd or some other tool to create an image of the disk based on the original geometry and not on what the card "thinks" its geometry is? Or am I missing something?

  Read the article

• Safely Remove Hardware (USB drive) needs End Process for rundll32.exe - Windows XP SP3

  - by Michael Warner

  Image Name PID Modules ========================= ====== ============================================= rundll32.exe 252 ntdll.dll, kernel32.dll, msvcrt.dll, GDI32.dll, USER32.dll, IMAGEHLP.dll, ShimEng.dll, AcGenral.DLL, ADVAPI32.dll, RPCRT4.dll, Secur32.dll, WINMM.dll, ole32.dll, OLEAUT32.dll, MSACM32.dll, VERSION.dll, SHELL32.dll, SHLWAPI.dll, USERENV.dll, UxTheme.dll, guard32.dll, fltlib.dll, comctl32.dll, comctl32.dll, NvMcTray.dll, SETUPAPI.dll, IMM32.dll, nvapi.dll I have to end the rundll32.exe process to safely remove my USB drive. Given the modules rundll32.exe is running, do you know which running module(s) would prevent the USB drive from being safely removed, and if so is there a more permanent straightforward solution such as changing an automatic service (the list from services.msc) into a disabled/manual service or maybe something else you can think of?

  Read the article

• help needed for server hardware configuration

  - by sansknowledge

  hi, basically i am software guy got recently promoted to managerial cadre which requires giving recommendation for server to run software developed by our company , the software is a work flow management and the db is oracle 11 , approximately the size of daily transaction would be around 40 gb, and it should be connected to ~ 150 client machines , the client machine will be growing. help on terms of cpu, processor, memory , rack and stack or raid (i really yet to understand that concept) OS, will be greatly appreciated.

  Read the article

• Win 7 XP Mode, run hardware?

  - by JL

  I have a Web Cam thats built into my laptop, no drivers exist for a 64Bit env (Thank you Sony!). Now I am wondering if I can somehow publish the web cam from XP Mode into my Win 7 environment. Does anyone know if this is possible?

  Read the article

• software and hardware

  - by pravin

  i tried to find out the mac address in my notebook by run, then cmd and then config /all (by the procedure)but i didn't find it in my notebook inspiron mini dell. can u help to find the mac address? Is there any setting?

  Read the article

• Offline installer for Windows 8?

  - by duncan12

  I have a computer repair service, and can see a few more people wanting Windows 8 updowngraded. Because of New Zealand's internet speeds it takes 1-2 hours to run the download part of the official Windows 8 upgrade tool. This means I have to go back to people the next day. I would like to keep an "offline" version of the Windows 8 upgrade tool on my flash drive, so I can avoid this inconvenience. Obviously it would still require a legit credit card etc, it just comes with the download part not needed. I cannot find such a tool. Does one exist?

  Read the article

• Advise on VMWare hardware requirements and host OS

  - by edwin.nathaniel

  Hi All, I'm a newbie developer wanting to learn a bit about Virtualization (from the IT point of view, not theoretical/academic). What I'd like to do: Prepare a machine Install VMWare or VirtualBox Prepare 3 Guest OSes (one for Win2k8 server, 2 for Ubuntu Server) Win2k8 will run SQL Server 2k8 and IIS (for ASP.NET MVC deployment) 1 Ubuntu Server for Drupal, SugarCRM, MediaWiki, typical LAMP stuff 1 Ubuntu Server for Java (Tomcat/Jetty + MySQL/PostgreSQL) What I'd like to know: What would be the ideal Host OS such that the Host OS should not spend too many resources on itself but should boost these instances of VMs (e.g: does Win2k8 performs better vs Linux?) What would be the ideal machine for this (preferably AMD base chip) I'm not expecting the best performance out of this setup, just a decent one to host one drupal instance, one ASP.NET MVC (future, not now), and one Tomcat/Jetty instance. NB: If you have a better suggestions on the setup, feel free to let me know (e.g: maybe Drupal and Tomcat can be in one instance but move the database to another instance instead of 1 instance map to 1 webserver and 1 dbserver). Thank you.

  Read the article

• Hardware, network infrastructure for runnng gaming server nd on VirtualGL

  - by archer

  Foud nice project VirtualGL (http://www.virtualgl.org/). Tried to run 3D fames (EVE Online, Prototype) on server and display the output on thin client using 100Mbps network. Server: Gentoo Linux on AMD Phoenom II x6 3.4Gz, 8GB RAM, 2x NVIDIA 9800 GTX in single session with display resulution 1024x768 on client. Performance is very promising. Going to increase network speed to 1Gbps (using either Ethernet or Fiber) and run 5-6 clients simultenously. My questions are: a) what would be better for network - 1Gbps Ethernet or Fiber (clients are distributed in max 20m around server)? Is that a must to use managed switch for better network performance? b) Should I increase number of video cards to put in SLI on server (going to use Gigabyte GA-890FXA-UD7 which has 6 PCIExpress slots [2 x4, 2 x8 and 2 x16]). Will it impact performance significantly. If I need to increase the number of video cards - what would be better - put 2 banks of video cards with 3 in bank using SLI, or 3 banks with 2 in the bank? Would linux recognize that and properly use all banks of video cards? c) any suggestions on good thin clients supporting 1920x1080 HDMI video and 1Gbps network I understand that my questions can't be answered clearly (unless someone already managed to use this kind of stuff ;)) although any suggestions would be very helpful.

  Read the article

• No option for keeping installed programs when upgrading Windows 7 to Windows 8

  - by Nison Maël

  (Related : How can I upgrade from Windows 7 to Windows 8 and keep my files and applications? ) I'm trying to upgrade my Windows 7 Pro (msdnaa) to Windows 8 Pro (msdnaa). The Windows 8 is the final version (I don't have access to previews on msdnaa anymore). As you can see on the related question accepted answer, Windows 8 should give an option to keep installed programs. But it does not. The only available options are "Keep only personal datas" and "Nothing". Any idea ? I'm running with SP1. I've got two partitions (one of them only contains data of a virtual machine). The two operating systems have the same architecture (64 bits). Screenshot:

  Read the article

• Proper Network Infastructure Setup DMZ, VPN, Routing Hardware Question

  - by NickToyota

  Greetings Server Fault Universe, So here's a quick background. Two weeks ago I started a new position as the systems administrator for an expanding health services company of just over 100 persons. The individual I was replacing left the company with little to no notice. Basically, I have inherited a network of one main HQ (where I am situated) which has existed for over 10 years, with five smaller offices (less than 20 persons). I am trying to make sense of the current setup. The network at the HQ includes: Linksys RV082 Router providing internet access for employees and site to site VPN connecting the smaller offices (using an RV042 each). We have both cable and dsl lines connected to balance traffic (however this does not work at all and is not my main concern right now). Cisco Ironport appliance. This is the main gateway for our incoming and outgoing emails. This also has an external IP and internal IP. Lotus domino in and out email servers connected to the mentioned Cisco gateway. These also have an external IP and internal IP. Two windows 2003 and 2008 boxes running as domain controllers with DNS of course. These also have both an external IP and internal IP. Website and web mail servers also on both external and internal IPs. I am still confused as why there are so many servers connected directly to the internet. I am seriously looking to redesign this setup with proper security practices in mind (my highest concern) and am in need of a proper firewall setup for the external/internal servers along with a VPN solution about 50 employees. Budget is not a concern as I have been given some flexibility to purchase necessary solutions. I have been told Cisco ASA appliance may help. Does anyone out in the Server Fault Universe have some recommendations? Thank you all in advance.

  Read the article

• Is it more difficult to upgrade your certification from SQL Server 2008 to 2012 than to get it from scratch?

  - by Diego

  I was wondering about the new MCSA certification on SQL 2012 and how it seems to be more difficult to upgrade your certification from 2008 to 2012 than to get the 2012 from scratch. Reason I think that is true is because anyone with any MCTS SQL Server 2008 certification can upgrade it to a MCSA 2012 by passing 2 tests (457 and 458). If you try to get it from scratch, you need to pass 3 tests (461, 462 and 463 - which are pretty much the same as 432, 433 and 448 for SQL 2008). But the thing is, even though its one test less to upgrade, all the skills necessary to pass 461, 462 and 463 are squeezed on 457 and 458 so, it seems easier to get from scratch than upgrade. Any thoughts?

  Read the article

• Updating from OSX Lion 10.7.2 to 10.7.4

  - by Ozair Kafray

  I just got my Mac upgraded to 10.7.2, just to be able to install Xcode 4.3.3. However, when I try to install Xcode 4.3.3, it says that it requires a minimum of OSX 10.7.3. Then using the "Software Upgrade" tool it detects successfully for me that a combined upgrade to 10.7.4 is available. As I select Install Item, the download starts however, it fails after complete download (taking two hours) saying something like "the update cannot be saved". I have done this twice already, and followed it up until 5 minutes were left. I have also checked that there is enough space (60 GB) available on my hard disk, while the update requires around 1.5 GB. The question is what is causing the problem mentioned in bold above.

  Read the article

• Surface (Pro) Soft Keyboard + Hardware Keyboard Issue

  - by Matt Clark

  When I got my Surface Pro 2, I loved it, and everything seemed to work flawlessly, until, wait for it, windows updates... The issue that I am having is the following, I primarily use the TC (TypeCover), as the Pro is an out-of-office laptop replacement for me, that I can still use to do whatever I need, but there are times when I will flip the cover, and use the system in tablet mode. The problem is that even when the TC is attached, any text field I click on, causes the OSK (on screen keyboard) to appear, as if I was running the system in tablet mode. As soon as I press a single button on the TC, the OSK is dismissed. When I first got the system, this was NOT the case, and it functioned as it should, where the OSK will only appear if the TC was not present. The biggest problem that I am having is the fact that the OSK causes the windows to be resized. Maximized windows will be shrunk, and stretched to their previous state, however a window that is not maximized will stay in its shrunken state, after the OSK has been dismissed. Below are pictures that show what is happening. Has anyone else experienced this issue? And is there any way to fix it? As you might imagine, having spent a pretty penny on a device like this, it it quite an annoying bug that needs fixing. I have been dealing with this issue for about 3 months now.

  Read the article

• Linux HA - Best Heartbeat hardware solution

  - by Martino Dino

  Hi all I would ask anyone what is the best layer 2 medium for heartbeat in Linux and how it's best configured. More precisely I've been thinking about a dedicated NIC for that purpose but then i thought that if a switch breaks then i would loose the heartbeat connection for most of the cluster and STONITH 'BUM'!!! Will probably loose my job after :) Distributing the heartbeat onto the main NICs of every node trough a vif sounds reasonable but im not sure if this is the best option (at least the switches are redundant to some extent). Is it possible to use heartbeat over a bonded interface and that sounds reasonable? Do you have any other tip/solution for that issue?

  Read the article

• Installing Windows 8 over Windows 7 with Ubuntu installed using wubi (both on `C:\`)

  - by peat-ar

  Current state I'm using both - Ubuntu (installed via Wubi on the same drive as Windows) and Windows 7 - quite frequently. I just bought the upgrade to Windows 8 and was curious to try it out, however I'm quite insecure whether Windows 8's "secure boot" will exclude my current Ubuntu installation and if it's even possible to keep it. So... is there any way to upgrade to Windows 8 without overwriting Ubuntu? (I really don't want to reinstall it, as a lot of customization has been done here and taking backups and all would get pretty wearing (same case for Windows 7 - if possible, I'd like to keep my files)) This is not a dublicate of Installing Windows 8 over Windows 7 with Ubuntu installed using wubi? because this question only deals with the case when Ubuntu has been installed on (e.g.) D:\ (while Windows is being installed on C:\)

  Read the article

• Trouble upgrading OS X, because HD doesn't use GUID Partition Table Scheme

  - by Erik Vold

  So I have a MacBook with Mac OS X 10.5 and I'm trying to upgrade to 10.6, but when I run the upgrade 'install' I quickly get to a page where I am supposed to 'Select the disk where you want to install Mac OS X' and there is only the one hard drive, so it is auto selected, and below that I see a warning message and the only button available is the 'Go Back' button. The warning message says: "Macintosh HD" can't be used because it doesn't use the GUID Partition Table scheme. Use Disk Utility to change the partition scheme. Select the disk, choose the Partition tab, select the Volume Scheme and then click Options. So I followed the above instructions, and I got to the last step, where I'm supposed to click the 'Options' button, the problem is that I cannot click that button, it is disabled.. So what am I supposed to do?

  Read the article

• RHEL 6.x on Rackspace Cloud and Dedicated hardware experiencing Redis Timeouts

  - by zhallett

  I just recently set up a mixture of RHEL 6.1 Rackspace cloud hosts and RHEL 6.2 dedicated hosts using Rackconnect. I am experiencing intermittent Redis timeouts from within our Rails 3.2.8 app with Redis 2.4.16 running on the RHEL 6.2 dedicated hosts. There is no network latency or packet loss. Also there are no errors on any interfaces on our cloud or dedicated servers or on the managed firewall from Rackspace. When Redis timesout, there is nothing logged within redis even though it is set up to do debug logging. The only error we receive is from Airbrake saying there was a Redis timeout. Network topology: RHEL 6.1 cloud hosts <--> Alert logic IDS <--> Cisco ASA 5510 <--> RHEL 6.2 dedicated hosts (web nodes) (two way NAT) (db hosts running redis) Ping from db host to web host: 64 bytes from 10.181.230.180: icmp_seq=998 ttl=64 time=0.520 ms 64 bytes from 10.181.230.180: icmp_seq=999 ttl=64 time=0.579 ms 64 bytes from 10.181.230.180: icmp_seq=1000 ttl=64 time=0.482 ms --- web1.xxxxxx.com ping statistics --- 1000 packets transmitted, 1000 received, 0% packet loss, time 999007ms rtt min/avg/max/mdev = 0.359/0.535/5.684/0.200 ms Ping from web host to db host: 64 bytes from 192.168.100.26: icmp_seq=998 ttl=64 time=0.544 ms 64 bytes from 192.168.100.26: icmp_seq=999 ttl=64 time=0.452 ms 64 bytes from 192.168.100.26: icmp_seq=1000 ttl=64 time=0.529 ms --- data1.xxxxxx.com ping statistics --- 1000 packets transmitted, 1000 received, 0% packet loss, time 999017ms rtt min/avg/max/mdev = 0.358/0.499/6.120/0.201 ms Redis config: daemonize yes pidfile /var/run/redis/6379/redis_6379.pid port 6379 timeout 0 loglevel debug logfile /var/lib/redis/log syslog-enabled yes syslog-ident redis-6379 syslog-facility local0 databases 16 save 900 1 save 300 10 save 60 10000 rdbcompression yes dbfilename dump-6379.rdb dir /var/lib/redis maxclients 10000 maxmemory-policy volatile-lru maxmemory-samples 3 appendfilename appendonly-6379.aof appendfsync everysec no-appendfsync-on-rewrite no auto-aof-rewrite-percentage 100 auto-aof-rewrite-min-size 64mb slowlog-log-slower-than 10000 slowlog-max-len 1024 vm-enabled no vm-swap-file /tmp/redis.swap vm-max-memory 0 vm-page-size 32 vm-pages 134217728 vm-max-threads 4 hash-max-zipmap-entries 512 hash-max-zipmap-value 64 list-max-ziplist-entries 512 list-max-ziplist-value 64 set-max-intset-entries 512 zset-max-ziplist-entries 128 zset-max-ziplist-value 64 activerehashing yes Redis-cli info: redis-cli info redis_version:2.4.16 redis_git_sha1:00000000 redis_git_dirty:0 arch_bits:64 multiplexing_api:epoll gcc_version:4.4.6 process_id:4174 uptime_in_seconds:79346 uptime_in_days:0 lru_clock:1064644 used_cpu_sys:13.08 used_cpu_user:19.81 used_cpu_sys_children:1.56 used_cpu_user_children:7.69 connected_clients:167 connected_slaves:0 client_longest_output_list:0 client_biggest_input_buf:0 blocked_clients:6 used_memory:15060312 used_memory_human:14.36M used_memory_rss:22061056 used_memory_peak:15265928 used_memory_peak_human:14.56M mem_fragmentation_ratio:1.46 mem_allocator:jemalloc-3.0.0 loading:0 aof_enabled:0 changes_since_last_save:166 bgsave_in_progress:0 last_save_time:1352823542 bgrewriteaof_in_progress:0 total_connections_received:286 total_commands_processed:507254 expired_keys:0 evicted_keys:0 keyspace_hits:1509 keyspace_misses:65167 pubsub_channels:0 pubsub_patterns:0 latest_fork_usec:690 vm_enabled:0 role:master db0:keys=6,expires=0 edit 1: add redis-cli info output

  Read the article

• Best SQL Server Configuration with this hardware.

  - by DavidStein

  I just received my new SQL Server from Dell. The server will be serve approximately 15 OLTP databases which average 10GB in size. Here are the basic specs: Dell PowerEdge R510 with up to 12 Hot Swap HDDs,LED Intel Xeon E5649 2.53GHz, 12M Cache, 5.86 GT/s QPI, 6 core (Quantity of 2) 48GB Memory (6x8GB), 1333MHz Dual Ranked RDIMMs for 2 Processors, Optimized PERC H700 Integrated RAID Controller, 1GB NV Cache 300GB 15K RPM SA SCSI 6Gbps 3.5in Hotplug Hard Drive (Quantity of 4) 600GB 15K RPM SA SCSI 6Gbps 3.5in Hotplug Hard Drive (Quantity of 6) My first thought was to use 3 arrays. OS - Raid 1 - (2)300GB T-Log - Raid 1 (2)300GB DB - Raid 5 (5) 600GB Backup - (1) 600GB - non-raided. However, I could also do the following after purchasing one more drive for backup. OS and T-Log - Raid 10 - (4)300GB DB - Raid 10 (6)600GB The hard drive space is not an issue as the databases are not that large. I'm just trying to optimize the speed of the applications using these databases. So, what would you guys recommend?

  Read the article

• Hardware and Software Working Together - What Does LJE say?

  - by Stephen Slade

   IDG News Service - Oracle CEO Larry Ellison said Oracle will continue to bet on selling high-end custom hardware for its software products, even amidst a growing trend toward roomfuls of cheap, generic servers. "You have to be in the hardware business and the software business, to get the best possible system," he said during a keynote speech at Oracle's OpenWorld conference in Tokyo. "We believe it's the right idea, we believe it's the next generation of computing, we believe all the pieces have to fit together." Ellison, as he has often done in the past, repeatedly referred to Apple as his "favorite example" of such tight integration. He was a close friend of Apple's co-founder Steve Jobs and previously served on Apple's board of directors.He said sales of Oracle's advanced servers were booming and generating around a billion dollars a year in revenue for the company, which has until recent years focused almost exclusively on its software offerings. With the explosion of popular online services and the increasing number of mobile devices that access them, demand is high for databases that can quickly respond to high numbers of relatively simple queries. While Oracle is pitching its expensive, finely-tuned machines to meet this requirement, Internet behemoths like Google, Facebook and Microsoft increasingly rely on armies of low-cost, easily replaceable servers. Ellison emphasized the high specifications of Oracle's servers, which come packed with multiple terabytes of RAM and flash-based storage for speed. Such machines are superior to large server farms, he said, because they require far less electricity and floor space, and are also cost competitive. When asked about whether purchasing such products would lock customers in to expensive hardware from Oracle, he promised that the company's software would always run on "multiple hardware sources."  Ellison, who spoke from Kyoto, Japan's ancient capital, was shown live online via webcast. The Oracle founder has a fondness for Japanese architecture and is staying in his large garden residence in the city Source: Ellison: Hardware-software integration key, Apple is best example. Oracle's founder and CEO reaffirmed his commitment to custom hardware for its software products  LINK to Computerworld article Apr 5, 2012 http://www.computerworld.com/s/article/9225858/Ellison_Hardware_software_integration_key_Apple_is_best_example?source=CTWNLE_nlt_entsoft_2012-04-09&utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+computerworld%2Fs%2Ffeed%2Ftopic%2F173+%28Computerworld+Databases+News%29#disqus_thread

  Read the article

• Oracle 10.2.0.1 --> 10.2.0.4 patchset errors on Advanced Queuing tables. Serious or not?

  - by hurfdurf

  We're running Oracle on RHEL 5.4 64-bit. We recently did an upgrade from 10.2.0.1 to 10.2.0.4. Many errors were generated during the upgrade (sample listed below from trace.log) but during application testing afterward everything seemed fine (clean EXP, inserts, updates, deletes, etc.). The errors look like they are all related to Advanced Queuing tables and views. We are not using replication at all, this is a simple single instance db. ORA-24002: QUEUE_TABLE SYS.AQ_EVENT_TABLE does not exist ORA-24032: object AQ$_AQ_SRVNTFN_TABLE_T exists, index could not be created ORA-24032: object AQ$_ALERT_QT_S exists, index could not be created for queue ORA-06512: at "SYS.DBMS_AQADM_SYSCALLS", line 117 ORA-06512: at "SYS.DBMS_AQADM_SYS", line 5116 Is this worth worrying about, and if so, how do I go about cleaning up/recreating the corrupted and/or missing objects?

  Read the article

• "Safely remove hardware"...doesn't.

  - by Kev

  I have an external USB harddisk that I have scripted to safely shut down after a backup, so the backup operator can unplug it, and knows not to if the lights are still on for some reason. It's always worked fine using the DevEject command-line utility. This week it failed for some reason: DevEject 1.0 2003 c't/Matthias Withopf Ejecting 'USB Mass Storage Device' [USB\VID_0411&PID_002A\00000704C8D2]...FAILED (23,5) Error ejecting device USB Mass Storage Device, vetoed (15,5)! Worse yet, using the SRH tray icon, I click Stop, click OK, it pauses about 5 seconds with OK and Cancel greyed out, closes the sub-window, and then the main window with the Stop button still shows the device, and Stop is still available. I can keep doing that and it never gets rid of the device. I can still access it in Explorer. LockHunter reports that nothing is locking the drive. I've made no changes to the backup configuration or anything to do with the drive this week. Why the sudden flake-out? Short of a restart, which I can't do today before the backup operator goes home, how do I fix it?

  Read the article

• Unable to create system partition or locate existing system partition during Windows-7 installation

  - by glenneroo

  I have Windows XP 32-bit installed on an ASUS A8N-SLI Deluxe with 2x 500gb drives in RAID1 using the NV RAID controller. On this there are 3 partitions (XP, XP backup and DATA) There are also 4x 500gb drives in RAID10 using the Silicon Image 3114R RAID controller. I just purchased a Windows 7 64-bit as an ISO download upgrade version which I promptly burned to DVD and attempted to perform an upgrade installation. Here is the error message I am getting: Firstly, where are these "Setup log files" located? Second, does this mean I need to find compatible (64-bit?) drivers for the Mainboard and put them on floppy? EDIT: As suggested on another forum, I tried downloading the nVidia Mainboard RAID drivers for Windows 2003 64-bit. I loaded the drivers successfully using the Load Driver button, but pressing NEXT still returns this error.

  Read the article

• BIOS password and hardware clock problems

  - by Slartibartfast

  I have HP 6730b lap top. I've bought it used and installed (Gentoo) linux on it. BIOS is protected with password, and guy I bought it from said "I've tweaked BIOS from Windows program, it never asked me for password". I've tried to erase password by removing battery, but it's still there. What did get erased obviously is hw clock. This is what hapends: a) I can leave lap top in January 1980 and it works b) I can correct system time, but boot wil fail with "superblock mount time in future" from where I need to manually do fsck and continue boot c) I can correct system time and sync it with hwclock -w but than it will behave as b) and it will reset BIOS time to 1.1.1980 00:00 So I need either a way to bypass a BIOS password (wich after lot of googling seems impossible),a way to persist a clock, or a setup that will enable hw clock in eighties, system clock in present time and normal boot.

  Read the article

• Why can't I upgrade my kernel via the terminal?

  - by Alvar

  If I type sudo apt-get update && sudo apt-get upgrade I can only see that the kernel packages are kept back, and not installed. As the screenshot shows. If I then start the update manager I can install the kernel, with no problems at all. As the second screenshot shows. Why is this? The kernel is a new package and not an upgrade of an old one, this is why you can't use the command upgrade that upgrades packages. You need to use the command dist-upgrade to install new packages.

  Read the article

• Yum Update fails due to conflicting perl packages

  - by amRit

  Hi I have a CentOS 5.2 i386 Production box with Qmail, LAMP etc now since it showed me that it could upgrade to 5.3, i downloaded all the packages using yum update However, the update fails due to perl packages conflicting I believe that while installing Qmail, I had tried for Mailscanner and thus it upgraded the per itself I read somewhere that we can uninstall the conflicting rpms and then go for the upgrade But, I am about 50 % sure that if I go ahead and uninstall perl, my server will crash like a falling house of cards Also, perl is needed by variety of packages working including vpopmail etc Thus, I request anyone to please tell me if we have a safer solution to this IF there is no solution to this, then can somebody please teach me how to backup and restore Qmail as it is. I can handle the rest of the things I sincerely appreciate those who have read and even thought about my problem In anticipation of a solution Regards amRit

  Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >