Search Results

Search found 91859 results on 3675 pages for 'help files'.

Page 74/3675 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

• Sending files through a webservice

  - by Jay

  Hi, I have to send some files through a webservice in C#. The files to be sent can be from different locations i.e. there is one folder having 4 files and another folder having 5 files. Assuming i have a mechanism to select which files to send. What would be the best way to send those files? Should I be sending them one by one and let the client figure out how to put them together, or zip all the files into a single file and send that zip file to the client. If there is any other way to implement this, I would be more than happy to look into that approach too. Thanks

  Read the article

• Is it possible to store only a checksum of a large file in git?

  - by Andrew Grimm

  I'm a bioinformatician currently extracting normal-sized sequences from genomic files. Some genomic files are large enough that I don't want to put them into the main git repository, whereas I'm putting the extracted sequences into git. Is it possible to tell git "Here's a large file - don't store the whole file, just take its checksum, and let me know if that file is missing or modified." If that's not possible, I guess I'll have to either git-ignore the large files, or, as suggested in this question, store them in a submodule.

  Read the article

• How to loop through all illustrator files in a folder (CS6)

  - by Julian

  I have written some JavaScript to save .ai files to two separate locations with different resolutions, one of them being cropped to a reduced size art board. (Courtesy of John Otterud / Articmill for the main part). There are other variables in the script that I am not using at present but I want to leave the functionality there for a later date/additional layers to export/other resolutions etc. I can't get it to loop through all files in a folder. I cannot find the script that works - or insert it at the right place. I can get as far a selecting the folder and I suppose creating an array but after that what next? This is the create array part of the script - // JavaScript Document //Set up vairaibles var destDoc, sourceDoc, sourceFolder, newLayer; // Select the source folder. sourceFolder = Folder.selectDialog('Select the folder with Illustrator files that you want to mere into one', '~'); destDoc = app.documents.add(); // If a valid folder is selected if (sourceFolder != null) { files = new Array(); // Get all files matching the pattern files = sourceFolder.getFiles(); I have inserted this at the beginning of the main script (probably where I am going wrong because I can select the folder but then nothing more) #target illustrator var docRef = app.activeDocument; with (docRef) { if (layers[i].name = 'HEADER') { layers[i].name = '#'+ activeDocument.name; save() } } // *** Export Layers as PNG files (in multiple resolutions) *** var subFolderName = "For_PLMA"; var subFolderTwoName = "For_VLP"; var saveInMultipleResolutions = true; // ... // Note: only use one character! var exportLayersStartingWith = "%"; var exportLayersWithArtboardClippingStartingWith = "#"; // ... var normalResolutionFileAppend = "_VLP"; var highResolutionFileAppend = "_PLMA"; // ... var normalResolutionScale = 100; var highResolutionScale = 200; var veryhighResolutionScale = 300; // *** Start of script *** var doc = app.activeDocument; // Make sure we have saved the document if (doc.path != "") { Then the rest of the export script runs on from there.

  Read the article

• reading files provided via $_GET

  - by Max

  I have a php script which takes a relative pathname via $_GET, reads that file and creates a thumbnail of it. I dont want the user to be able to read any file from the server. Only files from a certain directory should be allowed, otherwiese the script should exit(). Here is my folder structure: files/ <-- all files from this folder are public my_stuff/ <-- this is the folder of my script that reads the files My script is accessed via mydomain.com/my_stuff/script.php?pathname=files/some.jpg. What should not be allowed e. g.: mydomain.com/my_stuff/script.php?pathname=files/../db_login.php So, here is the relevant part of the script in my_stuff folder: ... $pathname = $_GET['pathname']; $pathname = realpath('../' . $_GET['pathname']); if(strpos($pathname, '/files/') === false) exit('Error'); ... I am not really sure about that approach, doesnt seem too safe for me. Anyone with a better idea?

  Read the article

• Coda 2 and SCP uploading files with the wrong permission

  - by Tom Black

  Currently I have a basic Ubuntu server running a website. The website is for a few students learning HTML/PHP and each student has their own account with a symbolic link to the shared website folder. Since the students are working on the website together, each user needs to be able to modify all the files (index.html for example). So I created a Webdev group containing all of the students with the default umask of 0002 set in their .bashrc (This allows newly created files to be 774). The shared folder is owned by the group Webdev with a chmod g+s so that new files/folders also belong to the group Webdev. The problem is that the students are using an IDE (Coda 2) and when they create a new file or folder using the IDE the file has the permissions of 644 on the server (not group writable). However when I make a new file through connecting with Cyberduck (SFTP client) the file permissions are 664 (as they should be). So I don't understand why Coda would be any different. However, after some trial and error I believe that Coda is first creating the file on local disk and then uploading that file to the server. On a mac by default a newly created file is 644. When the client uploads a file that's already 644 it stays 644 on the server side (umask is kind of useless in this situation). I've also tried creating ACL permissions for that folder but an uploaded file from my mac via SCP doesn't get the default ACL permissions. In Coda there is an option to change file permissions on a transfer. However this option seems to apply a chmod to all files being uploaded or saved. When one of students is modifying a file created by someone else when they try to upload the file or save it Coda tries to also do a chmod but fails because that user isn't the owner of the file. My current solution is using bindfs... I mount the shared web folder and bindfs sets permissions and group ownership of newly created files. However, bindfs seems to be a bit slow and I'm sure there is a better solution. Even if the students ditched Coda 2 and used Mac vim with scp the newly created files on the server would behave the same (644) which is default on the mac. Other options... 1) Either I teach the students to use (ssh/chmod) with their IDE to change their own file permissions when uploading. 2) I make all the students' Macs have the default umask of 0002 which would upload files with the right permissions. 3) Write a corn script to fix the file permissions every 5 to 15 minutes... (This option I think is the worst if students are working together at the same time). Is there any way that I could make all files that are uploaded via SCP have the default file permissions of 664 even though the uploaded file has a lower permission? (After hours of searching I don't think this is possible) I guess a corn script is my best option for novice users. How do web developers work together on larger sites? similar to this: http://serverfault.com/questions/283492/how-to-specify-file-permission-when-putting-a-file-using-openssh-sftp-command Also similar: http://serverfault.com/questions/395418/managing-linux-directory-permissions-sftp

  Read the article

• Linux: prevent VNC from swapping like mad

  - by Weezy

  I'm accessing a MacMini (with MacOS X 10.4) from my Linux machine using VNC and there's an issue that is driving me crazy... My Linux machine has 4 GB of ram and I run a lot of various apps on it and I've got no issue at all. It's all snappy and don't hear the hard disk swapping/read/writing too often. Now with VNC, the hard disk is swapping like mad... When I'm moving things on the OS X desktop. So I was thinking of creating a ramdisk and forcing the temp VNC files to go into that ramdisk but the problem is I can't find any temp files. I've attempted to do that: #!/bin/bash while [ true ] do lsof | grep vnc done And eyeball parse the output to try to find some temp file: no luck. The VNC version I'm using is this one: $ vncviewer -version VNC Viewer Free Edition 4.1.1 for X - built Jan 30 2009 19:33:16 Copyright (C) 2002-2005 RealVNC Ltd. No matter how much data is coming from the Mac, there should be plenty of memory (4 GB of ram) so there's really no reason to swap like crazy. This is driving me mad. Any help as to how I could solve this problem is most welcome because this is literally driving me nuts.

  Read the article

• Testing for disk write

  - by Montecristo

  I'm writing an application for storing lots of images (size <5MB) on an ext3 filesystem, this is what I have for now. After some searching here on serverfault I have decided for a structure of directories like this: 000/000/000000001.jpg ... 236/519/236519107.jpg This structure will allow me to save up to 1'000'000'000 images as I'll store a max of 1'000 images in each leaf. I've created it, from a theoretical point of view seems ok to me (though I've no experience on this), but I want to find out what will happen when there will be directories full of files in there. A question about creating this structure: is it better to create it all in one go (takes approx 50 minutes on my pc) or should I create directories as they are needed? From a developer point of view I think the first option is better (no extra waiting time for the user), but from a sysadmin point of view, is this ok? I've thought I could do as if the filesystem is already under the running application, I'll make a script that will save images as fast as it can, monitoring things as follows: how much time does it take for an image to be saved when there is no or little space used? how does this change when the space starts to be used up? how much time does it take for an image to be read from a random leaf? Does this change a lot when there are lots of files? Does launching this command sync; echo 3 | sudo tee /proc/sys/vm/drop_caches has any sense at all? Is this the only thing I have to do to have a clean start if I want to start over again with my tests? Do you have any suggestions or corrections?

  Read the article

• logrotate deletes all maillogs older than one day

  - by shadyabhi

  I see only two files maillog and maillog.1 in /var/log. grepping for maillog in logrotate.d directory gives three files that have a mention of maillog. syslog /var/log/messages /var/log/secure /var/log/maillog /var/log/spooler /var/log/boot.log /var/log/cron { #/var/log/messages /var/log/secure /var/log/spooler /var/log/boot.log /var/log/cron { daily sharedscripts postrotate /bin/kill -HUP `cat /var/run/syslogd.pid 2> /dev/null` 2> /dev/null || true /bin/kill -HUP `cat /var/run/rsyslogd.pid 2> /dev/null` 2> /dev/null || true endscript } syslog-ng /var/log/messages /var/log/secure /var/log/maillog /var/log/spooler /var/log/boot.log /var/log/cron /var/log/kern.log /var/log/kern { sharedscripts postrotate /bin/kill -HUP `cat /var/run/syslogd.pid 2> /dev/null` 2> /dev/null || true /bin/kill -HUP `cat /var/run/rsyslogd.pid 2> /dev/null` 2> /dev/null || true endscript } and maillog. /var/log/maillog { daily compress # rotate 365 rotate 14 sharedscripts postrotate /bin/kill -HUP `cat /var/run/syslogd.pid 2> /dev/null` 2> /dev/null || true /bin/kill -HUP `cat /var/run/rsyslogd.pid 2> /dev/null` 2> /dev/null || true endscript } I am new to logrotate so may be I am missing something obvious. What can be the issue? The setup was already done when I started managing the server so I don't also know as do why do I have 3 mentions for maillog in logrotate.

  Read the article

• Log backups "stalling" on SQL 2008?

  - by MattK

  I have interited a box running SQL Server 2008 and Windows 2003, and have had a few events where largeish (35GB) log backups "stall", both before and after the installation of SQL 2008 SP1. The server log ships to a standby, so regular log backups are taken at 15 minute intervals. However, after an index reorg causes the log to grow to about 35GB (on a DB with about 17GB of data), the next log backup runs to ~95% completion, then seems to stop. The process shows as suspended, with a wait state of BACKUPIO. CPU, read, and write activity on the SPID also does not change, and the process stays in this state for hours, when normally a backup of this size should complete in about 20 minutes. This server has a single RAID-1 volume, thus the source database files and destination backup files are on the same volume. However, I cannot determine if another process is blocking the backup. The backup SPID cannot be killed, and the only way to terminate the log backup and clear the lock on the backup file is to cycle the SQL Server service. There was one event where the backup terminated completely, with an error that another process had locked the backup file, but no details about what that process was. Can anyone suggest a cause or diagnostic process to this situation?

  Read the article

• Something like Dropbox for local use

  - by Casper

  I am looking for a solution to sync folder pairs between a NAS and multiple local macs. Each of the macs could edit files and the other macs should then get synced automatically. Basically my own local version of Dropbox without using "cloud-storage". I have looked into solutions using rsync. As I understand it rsync is not really capable of doing a bi-directional sync. I also do not want to necessarily invoke the sync process. I would prefer a daemon running in the background - waiting and checking for changes and then syncing them "live". The program should also be flexible enough to recognize that it sometimes (in the case with laptops) can not reach the NAS. It should then just wait for the connection to be back again, without bugging me ever few minutes. I have looked into synk, folderwatch, rsync and a few others, but I haven't really found a solution. Isn't there something like "offline folders" from microsoft for the mac? Thanks PS: just for clarification - I don't want to sync for backup purposes, instead I am wanting to sync so that all macs have a local copy of the most recent changes to files.

  Read the article

• nginx logrotate config

  - by TomOP

  Whats the best way to rotate nginx logfiles? In my opinion, I should create a file "nginx" in /etc/logrotate.d/ and fill it with the following code and do a /etc/init.d/syslog restart after that. This would be my config (I havn't tested it yet): /usr/local/nginx/logs/*.log { #rotate the logfile(s) daily daily # adds extension like YYYYMMDD instead of simply adding a number dateext # If log file is missing, go on to next one without issuing an error msg missingok # Save logfiles for the last 49 days rotate 49 # Old versions of log files are compressed with gzip compress # Postpone compression of the previous log file to the next rotation cycle delaycompress # Do not rotate the log if it is empty notifempty # create mode owner group create 644 nginx nginx #after logfile is rotated and nginx.pid exists, send the USR1 signal postrotate [ ! -f /usr/local/nginx/logs/nginx.pid ] || kill -USR1 `cat /usr/local/nginx/logs/nginx.pid` endscript } I have both the access.log and error.log files in /usr/local/nginx/logs/ and want to rotate both daily. Can anyone please tell me if "dateext" is correct? I want the log filename to be something like "access.log-2010-12-04". One more thing: Can I do the log rotation every day on a specific time (e.g. 11 pm)? If so, how? Thanks.

  Read the article

• internet connection drops randomly

  - by Remus Rigo

  hi all I have 3 PC's at home (with Win XP, Win 7 & Win 7) and a router. I am always connected to the internet through the router (PPoE connection). My problem is that sometimes when I want to search or open a page, my browser tells me that the server cannot be reached, as if I don't have a connection to the internet. Other times it logs me out from messenger, but browsing still works. FTP download/upload also works. If i disable and enable the LAN then all works fine. The connection doesn't always drop on all three PC's at the same time. Anyone got any idea besides re-installing OS? thanks

  Read the article

• Adding new users

  - by user36651

  I have an FTP server that is running Fedora Core release 6 (Zod) the problem is I need to create new users and I have root access saved in WinSCP, so I can run useradd or adduser via the fake terminal, but every time I try to use passwd <username> it crashes on me and won't allow me to change or add a password. my questions are this: --Is there a place the adduser script stores the default passwords? or what is the default? --Is there another way I can set passwords for new users? I don't want to change the root pass because EVERYONE has root access and it's saved in WinSCP (I'm sure you see the problem here...) I want to create User accounts for each user instead of giving them all blatant root access. the goal here is to gradually migrate everyone over to their new account and then change the root p/w. Any suggestions would be greatly appreciated.

  Read the article

• Sudden graphic card change? from Nvidia 8600GT to Nvidia 7050/Nvidia nForce 610i

  - by Ken

  Yesterday I got a virus and I had the Nvidia 8600 gt, as I have had throughout the whole time I had this computer. So I decided to fully format my pc to get rid of the virus. When it was finished, It came up with Nvidia 7050/ Nvidia nForce 610i in my systems and all my games have significantly gone down by fps. Note the driver update that came with the PC that works for Nvidia 8600gt doesnt work anymore, I have tried to download it but it comes with an error message saying that the PC has an incompatible graphics card. Can anyone explain this sudden change? I know for sure I have bought an Nvidia 8600 gt, and not the current one I have.

  Read the article

• Why is my Ares not Working?

  - by user26747

  I recently increased my blink broadband speed and now my Ares is not connecting. I spoke to the blink peeps and they deactivated my firewall..but Ares still is not working. What do i do?

  Read the article

• Apache / Postfix / Cyrus question

  - by Lerikun

  Apache: I have multiple domains on one hosting. I have a web-management software listening to port 3000 and one phpmyadmin. Can I restrict access to a certain domain? I mean that example.com:3000 will work and notexample.com:3000 not? (same for phpmyadmin) UPD: I have 3 IP's pointing to that host. Postfix/Cyrus: What is the right config to reject emails to mailboxes which do not even exist? (LDAP) Thanks

  Read the article

• Help with OpenVPN setup on Windows Server 2003

  - by Bill Johnson

  Hi all, Just wondering if someone can assist me further with the set-up of OpenVPN on my Windows Server 2003. I have configured Win Server as per the following guide: http://tinyurl.com/kxusv and I'm now at the stage of Creating the config files. I have a few questions that I need some assistance with. My server IP is 192.168.1.10 and my routers IP address is 192.168.1.1 (the router is a Netgear DGN2000). I have edited the server.ovpn file as per the following: push "dhcp-option DNS X.X.X.X" # Replace the Xs with the IP address of the DNS for your home network (usually your ISP's DNS) push "dhcp-option DNS X.X.X.X" # A second DNS server if you have one to include my ISP DNS and I have not edited anything else. Now my issue is with the client1.opvpn file as per the below: client dev tap #dev-node MyTAP #If you renamed your TAP interface or have more than one TAP interface then remove the # at the beginning and change "MyTAP" to its name proto udp remote YOURHOST.dyndns.org 1194 #You will need to enter you dyndns account or static IP address here. The number following it is the port you set in the server's config route 192.168.1.0 255.255.255.0 vpn_gateway 3 #This it the IP address scheme and subnet of your normal network your server is on. Your router would usually be 192.168.1.1 resolv-retry infinite nobind persist-key persist-tun ca "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\ca.crt" cert "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\client1.crt" # Change the next two lines to match the files in the keys directory. This should be be different for each client. key "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\client1.key" # This file should be kept secret ns-cert-type server cipher BF-CBC # Blowfish (default) encrytion comp-lzo verb 1 To me it looks like I will need to amend the following: remote YOURHOST.dyndns.org 1194 #You will need to enter you dyndns account or static IP address here. The number following it is the port you set in the server's config route 192.168.1.0 255.255.255.0 vpn_gateway 3 #This it the IP address scheme and subnet of your normal network your server is on. Your router would usually be 192.168.1.1 So, should the first line be the static IP of the machine that I'm applying this to? The IP address of the server (192.168.1.10) or something else? I'm also stuck on the second part 'route 192.168.1.0 255.255.255.0 vpn_gateway 3' Should this be the router IP which is 192.168.1.1 and the subnet is 255.255.255.0 and that is all I need to alter? The final part that I'm stuggling with is Configuring the router. Basically I have a Netgear DGN2000 and as it mentions that the router should be configured to port forward port 1194 to the server’s IP address of 192.168.1.150 all I have been able to do is in 'Firewall Rules' and on 'Inbound Services', set the Service to 'Any(ALL) and Send to LAN Server point to 1923.168.1.150. I'm not sure if this is correct? It is the following stage of the help guide that I'm struggling with and really need some help with: You need to make sure the port you configured OpenVPN to listen on is forwarded on the router to the IP address of your server. On the WRT54G, port forwarding is configured in the “Applications & Gaming” section. Enter 1194 for the port, UDP for the protocol, and 192.168.1.150 for the IP address. Make sure the entry is enabled and then save the setting. Next, you need to add an entry to the router’s Routing Table. This will enable the router to properly route requests from the clients to the TAP interface of the server. On the WRT54G you would go to the “Setup” page and then the “Advanced Routing” section. Enter the follwing info to make the entry: Enter Route Name: openVPN Destination LAN IP: 192.168.10.0 Subnet Mask: 255.255.255.252 Default Gateway: 192.168.1.150 Interface: LAN & Wireless Once the info has been typed in make sure you save the setting. Can anyone possibly guide me through setting this part up with my Netgear router. I see that once I have these 2 parts complete I'm there so I would really appreciate someone walking me through what is required in completing this. Much appreciated.

  Read the article

• configure apache web server in ubuntu 10.04

  - by mohit

  is there any way by which i can change the port number and localhost name on which apache web server runs in ubuntu ?

  Read the article

• Microsoft Exchange Server not sending or receiving mails and there are no errors

  - by Mike

  Our Microsoft Exchange Server not sending or receiving mails and there are no errors showing.

  Read the article

• Generic Sample Terms and Conditions for a Website

  - by Tyler

  I want just a very simple and very generic terms and conditions sample to go off of, anyone have any links? Thanks SU

  Read the article

• Plesk not working after restart?

  - by user37888

  Has anyone had a problem where you restarted your Plesk server with the services and only 1 domain works out of all the ones you have? Only one domain will work out of all of the ones on our server and we cannot understand why this is happening.

  Read the article

• Windows xp - recover document opened directly from IE

  - by Thingfish

  Hi Attempting to help a family member recover a document. The word 2007 document was downloaded and opened directly from a webmail interface using Internet Explorer running on Windows XP. The user saved the document multiple times while working on it for the good part of a day. After closing Word 2007 the user is not able to locate the document, and I have so far not been able to help. The computer has not been turned off, and the user has not attempted to open the document directly from the mail again. Recreating the events on vista/windows 7 its easy enough to locate the document under the Temporary Internet Files folder. I have however not been able to do the same on a Windows XP. Any suggestion for how to locate this document, or if its even possible? Thanks

  Read the article

• I know this is a stupid question but... How many websites can my server potentially hold?

  - by Daniel Kindler

  Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

  Read the article

• How many websites can my server potentially hold?

  - by Daniel Kindler

  Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

  Read the article

• Handling Indirection and keeping layers of method calls, objects, and even xml files straight

  - by Cervo

  How do you keep everything straight as you trace deeply into a piece of software through multiple method calls, object constructors, object factories, and even spring wiring. I find that 4 or 5 method calls are easy to keep in my head, but once you are going to 8 or 9 calls deep it gets hard to keep track of everything. Are there strategies for keeping everything straight? In particular, I might be looking for how to do task x, but then as I trace down (or up) I lose track of that goal, or I find multiple layers need changes, but then I lose track of which changes as I trace all the way down. Or I have tentative plans that I find out are not valid but then during the tracing I forget that the plan is invalid and try to consider the same plan all over again killing time.... Is there software that might be able to help out? grep and even eclipse can help me to do the actual tracing from a call to the definition but I'm more worried about keeping track of everything including the de-facto plan for what has to change (which might vary as you go down/up and realize the prior plan was poor). In the past I have dealt with a few big methods that you trace and pretty much can figure out what is going on within a few calls. But now there are dozens of really tiny methods, many just a single call to another method/constructor and it is hard to keep track of them all.

  Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >