Search Results

Search found 7099 results on 284 pages for 'job advancement'.

Page 74/284 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

• So my employer wants me to do less programming and focus on IT support

  - by Rich

  I was hired into a non tech company's IT department as a programmer a few years back, and after several rounds of lay offs, we're down to a skeleton crew. I've saved the company hundreds of thousands of dollars with my projects and management has been happy with them (although most of the stakeholders have since left the company). Management now wants me to limit the programming that I do and spend most of my time on IT support: putting out fires, dealing with vendors, outsourced contractors, supporting company systems, managing projects, etc. I am a little burnt out on programming since I've been pushed pretty hard for the past several years. However, I'm not sure if this is a good career move in the long run. I'm a decent programmer (and also good with databases) but not obsessed with it to the point of coding outside of work. I'm approaching my mid 30s and there's potential ageism to deal with down the line. While I'm fortunate to have survived the lay offs, it sorta feels like my job is being "dumbed down". I have both good technical skills and people skills...but it doesn't take a genius to do what I'm doing now. And my success is being increasingly linked to others' performance rather than my own... Just looking for some advice. Is it time to move on? That's not really an easy thing to do since I'd likely have to move to another area to find another comparable tech job. Should I go after another pure technical role? Or should I stay and try to make this work? People say do what you "enjoy" but it doesn't really matter to me as long as I'm getting paid. Also the ageism thing is on the horizon and could be an issue eventually. I'm making a decent (but not great) salary. Should I chase money and maximize my income while I still have a chance? Or be happy with a moderate salary and 40 hour work week?

  Read the article

• Welcome!

  - by mannamal

  Welcome to the Oracle Big Data Connectors blog, which will focus on posts related to integrating data on a Hadoop cluster with Oracle Database. In particular the blog will focus on best practices, usage notes, and performance tips for using Oracle Loader for Hadoop and Oracle Direct Connector for HDFS, which are part of Oracle Big Data Connectors. Oracle Big Data Connectors 1.0 also includes Oracle R Connector for Hadoop and Oracle Data Integrator Application Adapters for Hadoop. Oracle Loader for Hadoop: Oracle Loader for Hadoop loads data from Hadoop to Oracle Database. It runs as a MapReduce job on Hadoop to partition, sort, and convert the data into an Oracle-ready format, offloading to Hadoop the processing that is typically done using database CPUs. The data is thenloaded to the database by the Oracle Loader for Hadoop job (online load) or written out as Oracle Data Pump files for load and access later (offline load) with Oracle Direct Connector for HDFS. Oracle Direct Connector for HDFS: Oracle Direct Connector for HDFS is a connector for high speed access of data on HDFS from Oracle Database. With this connector Oracle SQL can be used to directly query data on HDFS. The data can be Oracle Data Pump files generated by Oracle Loader for Hadoop or delimited text files. The connector can also be used to load data into the database using SQL.

  Read the article

• Should I not show all my skills?

  - by Cracker

  I have been programming for a very long time and I have in depth knowledge of several technologies. Recently I applied for a web development job and in my resume I had listed all the skills - HTML, CSS, JavaScript, jQuery, AJAX, PHP, ASP, JSP, C/C++, ARM. Except for C/C++ and ARM I had shown the skill level for all technologies as expert. Many of my friends had applied for the same job and they did not have any web development experience. ALL of them got a call for interview. However I got a rejection saying that we have received applications from very high level candidates and you have not be selected to go to the next level. This has seriously demotivated me. I do not understand why I have been rejected when I had all the required skills and all those who did not have any of the skills have been selected. One reason which I think is that the employer might be thinking that how one person can be an expert in all the technologies. Once in another interview I was told by the HR manager that it is unbelievable that you know ASP, JSP and PHP all in depth as we have different programmers for each of the technology. Such incidents make me very unhappy as in spite of being highly capable of the position I am rejected. Should I not list all my skills in the resume to avoid such situations?

  Read the article

• MySQL documentation writer for MEM and Replication wanted!

  - by stefanhinz

  As MySQL is thriving and growing, we're looking for an experienced technical writer located in the UK or Ireland to join the MySQL documentation team. For this job, we need the best and most dedicated people around. You will be part of a geographically distributed documentation team responsible for the technical documentation of all MySQL products. Team members are expected to work independently, requiring discipline and excellent time-management skills as well as the technical facilities and experience to communicate across the Internet. Candidates should be prepared to work intensively with our engineers and support personnel. The overall team is highly distributed across different geographies and time zones. Our source format is DocBook XML. We're not just writing documentation, but also handling publication. This means you should be familiar with DocBook, and willing to learn our publication infrastructure. Your areas of responsibility would initially be MySQL Enterprise Monitor, and MySQL Replication. This means you should be familiar with MySQL in general, and preferably also with the MySQL Enterprise offerings. A MySQL certification will be considered an advantage. Other qualifications you should have: Native English speaker 5 or more years previous experience in writing software documentation Familiarity with distributed working environments and versioning systems such as SVN Comfortable with working on multiple operating systems, particularly Windows, Mac OS X, and Linux Ability to administer own workstations and test environment Excellent written and oral communication skills Ability to provide (online) samples of your work, e.g. books or articles If you're interested, contact me under [email protected]. For reference, the job offer can be viewed here.

  Read the article

• I don't program in my spare time. Does that make me a bad developer?

  - by not-my-real-name

  A lot of blogs and advice on the web seem to suggest that in order to become a great developer, doing just your day job is not enough. For example, you should contribute to open source projects in your spare time, write smartphone apps, etc. In fact a lot of this advice seems to suggest that if you don't love programming enough to do it all day long then you're probably in the wrong career. That doesn't ring true with me. I enjoy my work, but when I come home from the office I'm not in the mood to jump straight back onto the computer and start coding away until bedtime. I only have a certain number of hours free time each day, and I'd rather spend them on other hobbies, seeing friends or going outside than in front of the computer. I do get a kick out of programming, and do hack around outside of work occasionally. I'm committed to my personal development and spend time reading tech blogs and books as a way to keep learning and becoming better. But that doesn't extend so far as to my wanting to use all my spare time for coding. Does this mean I'm not a 'true' software developer at heart? Is it possible to become a good software developer without doing extra outside your job? I'd be very interested to hear what you think.

  Read the article

• Should I go with Java or Python for my next project, after using PHP for 5 years? [closed]

  - by vim

  I have a full-time PHP job and I've been working with PHP for 5 years. I'm not willing to stay within this technology stack any more. I also worked with Java for 2 year before, so for me it looks more obvious to switch back to Java. However during last 5 years I was thinking about starting my own project, and now I think I have a very good SAAS idea. I'm completely confused what technology should I use for my project. I don't want to do it in PHP, and after reading many articles about rapid prototype development it seems to me that Django is the best option. I will continue to work full time for my current employer because I need to pay my bills and will work on my project in my free time. The concern I have is should I do my project in Java or Python? To be realistic there is always a risk when you are doing your own project/start-up. If I do it in Java in the worst case scenario I believe I will be able to find a full time Java position because I already have some experience in Java + recent experience in my project. With regards to Python it looks like it is not very popular in my area and salaries are much more lower then for Java. On the other hand I have a feeling that if I chose Java it will take me a way longer to finish my project. Guys I'm completely confused and I need your advice. P.S. I have moved to London 2 years ago from another country, local guys are very welcome to share their thoughts about London's job market.

  Read the article

• Cannot usermod -L in LightDM scripts

  - by user95723

  I'm running Xubuntu 12.04 and use the LightDM. I want to restrict access to the machine as a kind of parental control. This is how it should work I hook in a script that executes just before the greeter comes up. Within that script some awk processing will read an entry in a config file and will trigger a usermod -L or usermod -U depending on whether the user is allowed to login. While user is logged, a cron job will count down the entry in the config and forces a xfce4-session-logout if time is up. A cron job running on a server will upload the "credits" on a daily base. How is this idea? That's theory, now for the problems It appears for some unknown reason, the usermod command is not executed, neither as part of a display-setup-script nor within the greeter-setup-script. I wrote a small sandbox script usermod -L johndoe 2error.txt touch /etc/blabla 2error.txt The script is executing, cause the blabla file is existing. That means that the script must have been executed with root privileges. error.txt is empty but the usermod command has just no effect. Is this a bug or a feature. What's wrong? Best regards and thank you Oli

  Read the article

• Updating entities in response to collisions - should this be in the collision-detection class or in the entity-updater class?

  - by Prog

  In a game I'm working on, there's a class responsible for collision detection. It's method detectCollisions(List<Entity> entities) is called from the main gameloop. The code to update the entities (i.e. where the entities 'act': update their positions, invoke AI, etc) is in a different class, in the method updateEntities(List<Entity> entities). Also called from the gameloop, after the collision detection. When there's a collision between two entities, usually something needs to be done. For example, zero the velocity of both entities in the collision, or kill one of the entities. It would be easy to have this code in the CollisionDetector class. E.g. in psuedocode: for(Entity entityA in entities){ for(Entity entityB in entities){ if(collision(entityA, entityB)){ if(entityA instanceof Robot && entityB instanceof Robot){ entityA.setVelocity(0,0); entityB.setVelocity(0,0); } if(entityA instanceof Missile || entityB instanceof Missile){ entityA.die(); entityB.die(); } } } } However, I'm not sure if updating the state of entities in response to collision should be the job of CollisionDetector. Maybe it should be the job of EntityUpdater, which runs after the collision detection in the gameloop. Is it okay to have the code responding to collisions in the collision detection system? Or should the collision detection class only detect collisions, report them to some other class and have that class affect the state of the entities?

  Read the article

• Does lesser wide screen fit better than a large one?

  - by artaxerxe

  About 3 weeks ago I changed my job. At the former workplace, I had 2 monitors for doing programming (GUI and core programming). Here, at the place where I am, the administrators gave me a laptop (15.6 inch) and wanted to provide me a wider screen additional to the laptop's one. I said that for now I want to test as it is, with the laptop's screen. I also want to mention, that in the current job I'm not targeted for GUI development. My feeling until now (but it can be just a feeling) is that working on this single not so wide screen, I'm not so weary after a full day work as I was with 2 wide monitors. Does anyone have any recommendations on this problem? Does lesser screens (in my case exclusively 15.6 inch vs 20 inch screens) affect your eyes? If anyone have any knowledge about, please feel free to say what's your opinion. P.S. I think that's a good site for this kind of question. Otherwise, please guide me on what site from StackExchange should I put it. Thanks.

  Read the article

• Java or Python? Career/Start-up advice needed [closed]

  - by vim

  I have a full-time PHP job and I've been working with PHP for 5 years. As you can guess after spending 5 years I'm not willing to stay within this technology stack any more. I also worked with Java for 2 year before, so for me it looks more obvious to switch back to Java. However during last 5 years I was thinking about starting my own project, and now I think I have a very good SAAS idea. I'm completely confused what technology should I use for my project. I don't want to do it in PHP, and after reading many articles about rapid prototype development it seems to me that Django/Ruby is the best option. I will continue to work full time for my current employer because I need to pay my bills and will work on my project in my free time. The concern I have is should I do my project in Java or Python? To be realistic there is always a risk when you are doing your own project/start-up. If I do it in Java in the worst case scenario I believe I will be able to find a full time Java position because I already have some experience in Java + recent experience in my project. With regards to Python it looks like it is not very popular in my area and salaries are much more lower then for Java. On the other hand I have a feeling that if I chose Java it will take me a way longer to finish my project. Guys I'm completely confused and I need your advice. P.S. I have moved to London 2 years ago from another country, local guys are very welcome to share their thoughts about London's job market.

  Read the article

• Location Change Salary Differences [closed]

  - by GameDev

  DISCLAIMER: I know that this might be a "regional" question but I'm also asking for help as far as what resources to use to determine my decision. I'm currently talking to a recruiter for a game developer in the SF Bay area. I work in a relatively low-cost area in the south. I really want to get into game development but my current career is general web development. I'm very interested in taking the job, but my concern is that the amount they're willing to pay might be a relative pay cut. Here are some factors: It's not an entry-level position, the title is Senior Software Engineer. I have 5+ years of experience. The calculators online tell me that I should be expecting around 2x my current pay rate(http://www.bestplaces.net/col/). My current pay is in the mid $60k/yr, so that's like 120-130k. The recruiter told me at my experience level I can expect about $90-100/yr, and that those cost of living calculators were way off. The benefits will definitely be better, it's much larger company (help with commuting, catered meals, etc). But is the recruiter trying to give me a snow job on the pay scale, or is that a reasonable change from a smallish town in the south to somewhere in the SF bay area? How can I find this out? Glassdoor and Payscale seem to say "senior software developers" in that area make around 110 in median salary, but Payscale says it's closer to $135k, that range seems pretty large.

  Read the article

• How to learn to deliver quality software designs when working on a tight deadline?

  - by chester89

  I read many books about how to design great software, but I kind of struggle to come up with a good design decisions when it comes to business apps, especially when the timeframe is tough. In the company I currently work for, the following situation happen all the time: my teamlead tells me that there's a task to do, I call some guy or a girl from business who tells me exactly what is it they want, and then I start coding. The task always fits in some existing application (we do only web apps or web services), usually it's purpose is to pull data from one datasource and put into the other one, with some business logic attached in the process. I start coding and then, after spending some time on a problem, my code didn't work as expected - either because of technical mistake or my lack of knowledge of the domain. The business is ringing me 2-3 times a day to hurry me up. I ask my team lead to help, he comes up, sees my code and goes like 'What's this?'. Then he throws away about half of my code, including all the design decisions I made, writes 2-3 methods that does the job (each of them usually 200-300 lines long or more, by the way), and task is complete, code works as it should have. The guy is smarter than me, obviously, and I'm aware of that. My goal is to be better software developer, that means write better code, not finish the job quicker with some crappy code. And the thing is, when I have enough time to tackle a problem, I can come up with a design that is good (in my opinion, of course), but I fall short to do so when I'm on a tight deadline. What should I do? I am fully aware that it's rather vague explanation, but please bear with me

  Read the article

• Moving from VB.NET to C#

  - by w0051977

  I have worked with the VB.NET programming language for the last five years. I want to move to C# as I believe skills are more valued plus it is more similar to other object oriented languages like Java. I was offered a job today working primarily with C#. I explained at the interview that I am a VB.NET Developer and I did the test in VB.NET (though they would of preferred C#). If I decide to accept the position then I will be starting at at the top end of the salary bracket (only very slightly more than I earn now). I will have to help more junior staff in the future who probably have more experience using C# than I do (1-2 years). I used Java and C++ at university. I want to move towards C# in the future as I believe C# skills are more valued based on job advertisements I have seen recently. Has anyone else done this and did it work? i.e. move to a new organisation as a C# Developer at quite a senior level with experience primarily using VB.NET.

  Read the article

• Upon Reflection

  - by foxjazz

  During my tenure at the last company, I didn't let my career stagnate as others have and as time moved along.When at work or home, spend 10% of your time learning something new about some aspect or segway of your job so that your skills are marketable in case you lose it. From experience let me reinforce that it pays off. It pays off in your current job because of the education received and the competence increase of your skills which applied will bring recognition.In these days and times, loyalty to a company is truly at an end. However many companies do care about cultivating their employees which creates a brand of loyalty that can't be replaced. Old companies with the Corp. mentality (or because of the corp. mentality) ever decrease their budgets on organizational sections and thereby do a RIF as a matter of business.The mistakes they make during this process can be risky. But who am I, but a lowly ole programmer, to judge risk. If you are laid off, be friendly with your past manager, and based on simple questions and help, give whatever help you can over the phone even though you are under no obligation to do so.It is also quite possible that there are opportunities to make at home with a new company in the future. Just remember that when inquiring about a position, take advantage of the training that is offered, and keep yourself emotionally and educationally fit.Talk soon,foxjazz

  Read the article

• To program in free time as a programmer, is to show that programming is passion. If not, is the programmer good? [closed]

  - by SonofWatson

  Possible Duplicate: I don't program in my spare time. Does that make me a bad developer? A lot of blogs and advice on the web seem to suggest that in order to become a great developer, doing just your day job is not enough. For example, you should contribute to open source projects in your spare time, write smartphone apps, etc. In fact a lot of this advice seems to suggest that if you don't love programming enough to do it all day long then you're probably in the wrong career. That doesn't ring true with me. I enjoy my work, but when I come home from the office I'm not in the mood to jump straight back onto the computer and start coding away until bedtime. I only have a certain number of hours free time each day, and I'd rather spend them on other hobbies, seeing friends or going outside than in front of the computer. I do get a kick out of programming, and do hack around outside of work occasionally. I'm committed to my personal development and spend time reading tech blogs and books as a way to keep learning and becoming better. But that doesn't extend so far as to my wanting to use all my spare time for coding. Does this mean I'm not a 'true' software developer at heart? Is it possible to become a good software developer without doing extra outside your job? I'd be very interested to hear what you think.

  Read the article

• I want to make "stuff" on the web, is a BsC. in Computers necessary/overkill? [on hold]

  - by notypist

  I'm 24 and have a lead role in a major news outlet in my country, with a good pay and public image in the horizon. I hold a job that was previously held by people with 15-20 years of experience and considered one of the top 5 news anchors in my country. My passion though, is computers. The web, to be precise. I was a problogger at a very young age. I hacked my way through CSS and some basic HTML and PHP. But I want to move forward - I want to CREATE not just STRUCTURE things. Giving up the present (and especially the seemingly promising future) in my current industry is hard, my friends raise their eyebrows... I'm considering a BsC. in computer Engineering - but my stats are short of getting into a good university for this discipline. Plus, I'm not the best with math - although I do exceptionally well in statistics and other numbers that are more applicable to real life. I tried learning PHP through online websites, but that just "doesn't cut it" for me. Nope. So what are my options here? if I don't want to build hardware or and deal with overly-complex algorithmic but would like, for example - to build a well functioning iPhone and iPad app, or a SaaS, a startup...do I have to go the BsC. route? I don't see any option to get an "official" education in strictly "web" concepts and languages.. Note: I'm well off financially, so I'm doing this more to be able to create stuff, rather than get a job in a corporations. Although if I land somewhere high, that might be an option. But my main concern is getting the tools.

  Read the article

• My proposed design is usually worse than my colleague's - how do I get better?

  - by user151193

  I have been programming for couple of years and am generally good when it comes to fixing problems and creating small-to-medium scripts, however, I'm generally not good at designing large scale programs in object oriented way. Few questions Recently, a colleague who has same number of years of experience as me and I were working on a problem. I was working on a problem longer than him, however, he came up with a better solution and in the end we're going to use his design. This really affected me. I admit his design is better, but I wanted to come up with a design as good as his. I'm even contemplating quitting the job. Not sure why but suddenly I feel under some pressure e.g. what would juniors think of me and etc? Is it normal? Or I'm thinking a little too much into this? My job involves programming in Python. I try to read source code but how do you think I can improve me design skills? Are there any good books or software that I should study? Please enlighten me. I will really appreciate your help.

  Read the article

• Working in Germany (Munich) [closed]

  - by adri

  My husband and I are relocating to Munich in August (He's German). I have been looking for jobs online since I heard that software developers are in great demand. And by the looks of it, seems to be correct. There are lots of offers on line but I have a problem, my german is not spectacular. I would rate it as basic. Good to be a tourist but not good to write anything formal, not even my cover letter. So I was wondering how hard is really going to be to find a job for me with virtually no german (I'm studying, but good german is not going to happen over night). Also, would it be possible to secure a job before arriving to Germany? I have nearly 10 years of working experience developing software, mostly in .net (c#, vb, winForms, asp.net) but I also know java. 3 years experience as a team leader for groups of up to 8 people. In the last couple of years I've been working mostly on digitalization of documents (such as birth certificates and the like) but I'm more than willing to try other fields Also I speak English, Spanish, Italian, a bit of portuguese and of course a bit of german.

  Read the article

• Lock-Free, Wait-Free and Wait-freedom algorithms for non-blocking multi-thread synchronization.

  - by GJ

  In multi thread programming we can find different terms for data transfer synchronization between two or more threads/tasks. When exactly we can say that some algorithem is: 1)Lock-Free 2)Wait-Free 3)Wait-Freedom I understand what means Lock-free but when we can say that some synchronization algorithm is Wait-Free or Wait-Freedom? I have made some code (ring buffer) for multi-thread synchronization and it use Lock-Free methods but: 1) Algorithm predicts maximum execution time of this routine. 2) Therad which call this routine at beginning set unique reference, what mean that is inside of this routine. 3) Other threads which are calling the same routine check this reference and if is set than count the CPU tick count (measure time) of first involved thread. If that time is to long interrupt the current work of involved thread and overrides him job. 4) Thread which not finished job because was interrupted from task scheduler (is reposed) at the end check the reference if not belongs to him repeat the job again. So this algorithm is not really Lock-free but there is no memory lock in use, and other involved threads can wait (or not) certain time before overide the job of reposed thread. Added RingBuffer.InsertLeft function: function TgjRingBuffer.InsertLeft(const link: pointer): integer; var AtStartReference: cardinal; CPUTimeStamp : int64; CurrentLeft : pointer; CurrentReference: cardinal; NewLeft : PReferencedPtr; Reference : cardinal; label TryAgain; begin Reference := GetThreadId + 1; //Reference.bit0 := 1 with rbRingBuffer^ do begin TryAgain: //Set Left.Reference with respect to all other cores :) CPUTimeStamp := GetCPUTimeStamp + LoopTicks; AtStartReference := Left.Reference OR 1; //Reference.bit0 := 1 repeat CurrentReference := Left.Reference; until (CurrentReference AND 1 = 0)or (GetCPUTimeStamp - CPUTimeStamp > 0); //No threads present in ring buffer or current thread timeout if ((CurrentReference AND 1 <> 0) and (AtStartReference <> CurrentReference)) or not CAS32(CurrentReference, Reference, Left.Reference) then goto TryAgain; //Calculate RingBuffer NewLeft address CurrentLeft := Left.Link; NewLeft := pointer(cardinal(CurrentLeft) - SizeOf(TReferencedPtr)); if cardinal(NewLeft) < cardinal(@Buffer) then NewLeft := EndBuffer; //Calcolate distance result := integer(Right.Link) - Integer(NewLeft); //Check buffer full if result = 0 then //Clear Reference if task still own reference if CAS32(Reference, 0, Left.Reference) then Exit else goto TryAgain; //Set NewLeft.Reference NewLeft^.Reference := Reference; SFence; //Try to set link and try to exchange NewLeft and clear Reference if task own reference if (Reference <> Left.Reference) or not CAS64(NewLeft^.Link, Reference, link, Reference, NewLeft^) or not CAS64(CurrentLeft, Reference, NewLeft, 0, Left) then goto TryAgain; //Calcolate result if result < 0 then result := Length - integer(cardinal(not Result) div SizeOf(TReferencedPtr)) else result := cardinal(result) div SizeOf(TReferencedPtr); end; //with end; { TgjRingBuffer.InsertLeft } RingBuffer unit you can find here: RingBuffer, CAS functions: FockFreePrimitives, and test program: RingBufferFlowTest Thanks in advance, GJ

  Read the article

• Linq-to-XML query to select specific sub-element based on additional criteria

  - by BrianLy

  My current LINQ query and example XML are below. What I'd like to do is select the primary email address from the email-addresses element into the User.Email property. The type element under the email-address element is set to primary when this is true. There may be more than one element under the email-addresses but only one will be marked primary. What is the simplest approach to take here? Current Linq Query (User.Email is currently empty): var users = from response in xdoc.Descendants("response") where response.Element("id") != null select new User { Id = (string)response.Element("id"), Name = (string)response.Element("full-name"), Email = (string)response.Element("email-addresses"), JobTitle = (string)response.Element("job-title"), NetworkId = (string)response.Element("network-id"), Type = (string)response.Element("type") }; Example XML: <?xml version="1.0" encoding="UTF-8"?> <response> <response> <contact> <phone-numbers/> <im> <provider></provider> <username></username> </im> <email-addresses> <email-address> <type>primary</type> <address>[email protected]</address> </email-address> </email-addresses> </contact> <job-title>Account Manager</job-title> <type>user</type> <expertise nil="true"></expertise> <summary nil="true"></summary> <kids-names nil="true"></kids-names> <location nil="true"></location> <guid nil="true"></guid> <timezone>Eastern Time (US &amp; Canada)</timezone> <network-name>Domain</network-name> <full-name>Alice</full-name> <network-id>79629</network-id> <stats> <followers>2</followers> <updates>4</updates> <following>3</following> </stats> <mugshot-url> https://assets3.yammer.com/images/no_photo_small.gif</mugshot-url> <previous-companies/> <birth-date></birth-date> <name>alice</name> <web-url>https://www.yammer.com/domain.com/users/alice</web-url> <interests nil="true"></interests> <state>active</state> <external-urls/> <url>https://www.yammer.com/api/v1/users/1089943</url> <network-domains> <network-domain>domain.com</network-domain> </network-domains> <id>1089943</id> <schools/> <hire-date nil="true"></hire-date> <significant-other nil="true"></significant-other> </response> <response> <contact> <phone-numbers/> <im> <provider></provider> <username></username> </im> <email-addresses> <email-address> <type>primary</type> <address>[email protected]</address> </email-address> </email-addresses> </contact> <job-title>Office Manager</job-title> <type>user</type> <expertise nil="true"></expertise> <summary nil="true"></summary> <kids-names nil="true"></kids-names> <location nil="true"></location> <guid nil="true"></guid> <timezone>Eastern Time (US &amp; Canada)</timezone> <network-name>Domain</network-name> <full-name>Bill</full-name> <network-id>79629</network-id> <stats> <followers>3</followers> <updates>1</updates> <following>1</following> </stats> <mugshot-url> https://assets3.yammer.com/images/no_photo_small.gif</mugshot-url> <previous-companies/> <birth-date></birth-date> <name>bill</name> <web-url>https://www.yammer.com/domain.com/users/bill</web-url> <interests nil="true"></interests> <state>active</state> <external-urls/> <url>https://www.yammer.com/api/v1/users/1089920</url> <network-domains> <network-domain>domain.com</network-domain> </network-domains> <id>1089920</id> <schools/> <hire-date nil="true"></hire-date> <significant-other nil="true"></significant-other> </response> </response>

  Read the article

• How to deploy jBPM 3.2.2 console on Oracle 10g iAS

  - by Balint Pato

  Hi! Does anybody have experience regarding deployment of the jBPM Administration Console on Oracle 10g iAS? I successfully deployed it using an .ear, security mappings working, I can even login to the console, Hibernate finds the JNDI datasource but it cannot find the TransactionManager. I see no log, only the exception thrown in the jsf page: Can anybody help me? The hibernate.cfg.xml file now looks like this: <?xml version='1.0' encoding='utf-8'?> <!DOCTYPE hibernate-configuration PUBLIC "-//Hibernate/Hibernate Configuration DTD 3.0//EN" "http://hibernate.sourceforge.net/hibernate-configuration-3.0.dtd"> <hibernate-configuration> <session-factory> <!-- hibernate dialect --> <property name="hibernate.dialect">org.hibernate.dialect.Oracle9Dialect</property> <!-- JDBC connection properties (begin) === <property name="hibernate.connection.driver_class">org.hsqldb.jdbcDriver</property> <property name="hibernate.connection.url">jdbc:hsqldb:mem:jbpm</property> <property name="hibernate.connection.username">sa</property> <property name="hibernate.connection.password"></property> ==== JDBC connection properties (end) --> <property name="hibernate.cache.provider_class">org.hibernate.cache.HashtableCacheProvider</property> <!-- DataSource properties (begin) --> <property name="hibernate.connection.datasource">java:/JbpmDS</property> <!-- DataSource properties (end) --> <!-- JTA transaction properties (begin) --> <property name="hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</property> <!-- <property name="hibernate.transaction.manager_lookup_class">org.hibernate.transaction.JBossTransactionManagerLookup</property>--> <!-- JTA transaction properties (end) --> <!-- CMT transaction properties (begin) === <property name="hibernate.transaction.factory_class">org.hibernate.transaction.CMTTransactionFactory</property> <property name="hibernate.transaction.manager_lookup_class">org.hibernate.transaction.JBossTransactionManagerLookup</property> ==== CMT transaction properties (end) --> <!-- logging properties (begin) --> <property name="hibernate.show_sql">true</property> <property name="hibernate.format_sql">true</property> <property name="hibernate.use_sql_comments">true</property> <--==== logging properties (end) --> <!-- ############################################ --> <!-- # mapping files with external dependencies # --> <!-- ############################################ --> <!-- following mapping file has a dependendy on --> <!-- 'bsh-{version}.jar'. --> <!-- uncomment this if you don't have bsh on your --> <!-- classpath. you won't be able to use the --> <!-- script element in process definition files --> <mapping resource="org/jbpm/graph/action/Script.hbm.xml"/> <!-- following mapping files have a dependendy on --> <!-- 'jbpm-identity.jar', mapping files --> <!-- of the pluggable jbpm identity component. --> <!-- Uncomment the following 3 lines if you --> <!-- want to use the jBPM identity mgmgt --> <!-- component. --> <!-- identity mappings (begin) --> <mapping resource="org/jbpm/identity/User.hbm.xml"/> <mapping resource="org/jbpm/identity/Group.hbm.xml"/> <mapping resource="org/jbpm/identity/Membership.hbm.xml"/> <!-- identity mappings (end) --> <!-- following mapping files have a dependendy on --> <!-- the JCR API --> <!-- jcr mappings (begin) === <mapping resource="org/jbpm/context/exe/variableinstance/JcrNodeInstance.hbm.xml"/> ==== jcr mappings (end) --> <!-- ###################### --> <!-- # jbpm mapping files # --> <!-- ###################### --> <!-- hql queries and type defs --> <mapping resource="org/jbpm/db/hibernate.queries.hbm.xml" /> <!-- graph.action mapping files --> <mapping resource="org/jbpm/graph/action/MailAction.hbm.xml"/> <!-- graph.def mapping files --> <mapping resource="org/jbpm/graph/def/ProcessDefinition.hbm.xml"/> <mapping resource="org/jbpm/graph/def/Node.hbm.xml"/> <mapping resource="org/jbpm/graph/def/Transition.hbm.xml"/> <mapping resource="org/jbpm/graph/def/Event.hbm.xml"/> <mapping resource="org/jbpm/graph/def/Action.hbm.xml"/> <mapping resource="org/jbpm/graph/def/SuperState.hbm.xml"/> <mapping resource="org/jbpm/graph/def/ExceptionHandler.hbm.xml"/> <mapping resource="org/jbpm/instantiation/Delegation.hbm.xml"/> <!-- graph.node mapping files --> <mapping resource="org/jbpm/graph/node/StartState.hbm.xml"/> <mapping resource="org/jbpm/graph/node/EndState.hbm.xml"/> <mapping resource="org/jbpm/graph/node/ProcessState.hbm.xml"/> <mapping resource="org/jbpm/graph/node/Decision.hbm.xml"/> <mapping resource="org/jbpm/graph/node/Fork.hbm.xml"/> <mapping resource="org/jbpm/graph/node/Join.hbm.xml"/> <mapping resource="org/jbpm/graph/node/MailNode.hbm.xml"/> <mapping resource="org/jbpm/graph/node/State.hbm.xml"/> <mapping resource="org/jbpm/graph/node/TaskNode.hbm.xml"/> <!-- context.def mapping files --> <mapping resource="org/jbpm/context/def/ContextDefinition.hbm.xml"/> <mapping resource="org/jbpm/context/def/VariableAccess.hbm.xml"/> <!-- taskmgmt.def mapping files --> <mapping resource="org/jbpm/taskmgmt/def/TaskMgmtDefinition.hbm.xml"/> <mapping resource="org/jbpm/taskmgmt/def/Swimlane.hbm.xml"/> <mapping resource="org/jbpm/taskmgmt/def/Task.hbm.xml"/> <mapping resource="org/jbpm/taskmgmt/def/TaskController.hbm.xml"/> <!-- module.def mapping files --> <mapping resource="org/jbpm/module/def/ModuleDefinition.hbm.xml"/> <!-- bytes mapping files --> <mapping resource="org/jbpm/bytes/ByteArray.hbm.xml"/> <!-- file.def mapping files --> <mapping resource="org/jbpm/file/def/FileDefinition.hbm.xml"/> <!-- scheduler.def mapping files --> <mapping resource="org/jbpm/scheduler/def/CreateTimerAction.hbm.xml"/> <mapping resource="org/jbpm/scheduler/def/CancelTimerAction.hbm.xml"/> <!-- graph.exe mapping files --> <mapping resource="org/jbpm/graph/exe/Comment.hbm.xml"/> <mapping resource="org/jbpm/graph/exe/ProcessInstance.hbm.xml"/> <mapping resource="org/jbpm/graph/exe/Token.hbm.xml"/> <mapping resource="org/jbpm/graph/exe/RuntimeAction.hbm.xml"/> <!-- module.exe mapping files --> <mapping resource="org/jbpm/module/exe/ModuleInstance.hbm.xml"/> <!-- context.exe mapping files --> <mapping resource="org/jbpm/context/exe/ContextInstance.hbm.xml"/> <mapping resource="org/jbpm/context/exe/TokenVariableMap.hbm.xml"/> <mapping resource="org/jbpm/context/exe/VariableInstance.hbm.xml"/> <mapping resource="org/jbpm/context/exe/variableinstance/ByteArrayInstance.hbm.xml"/> <mapping resource="org/jbpm/context/exe/variableinstance/DateInstance.hbm.xml"/> <mapping resource="org/jbpm/context/exe/variableinstance/DoubleInstance.hbm.xml"/> <mapping resource="org/jbpm/context/exe/variableinstance/HibernateLongInstance.hbm.xml"/> <mapping resource="org/jbpm/context/exe/variableinstance/HibernateStringInstance.hbm.xml"/> <mapping resource="org/jbpm/context/exe/variableinstance/LongInstance.hbm.xml"/> <mapping resource="org/jbpm/context/exe/variableinstance/NullInstance.hbm.xml"/> <mapping resource="org/jbpm/context/exe/variableinstance/StringInstance.hbm.xml"/> <!-- job mapping files --> <mapping resource="org/jbpm/job/Job.hbm.xml"/> <mapping resource="org/jbpm/job/Timer.hbm.xml"/> <mapping resource="org/jbpm/job/ExecuteNodeJob.hbm.xml"/> <mapping resource="org/jbpm/job/ExecuteActionJob.hbm.xml"/> <!-- taskmgmt.exe mapping files --> <mapping resource="org/jbpm/taskmgmt/exe/TaskMgmtInstance.hbm.xml"/> <mapping resource="org/jbpm/taskmgmt/exe/TaskInstance.hbm.xml"/> <mapping resource="org/jbpm/taskmgmt/exe/PooledActor.hbm.xml"/> <mapping resource="org/jbpm/taskmgmt/exe/SwimlaneInstance.hbm.xml"/> <!-- logging mapping files --> <mapping resource="org/jbpm/logging/log/ProcessLog.hbm.xml"/> <mapping resource="org/jbpm/logging/log/MessageLog.hbm.xml"/> <mapping resource="org/jbpm/logging/log/CompositeLog.hbm.xml"/> <mapping resource="org/jbpm/graph/log/ActionLog.hbm.xml"/> <mapping resource="org/jbpm/graph/log/NodeLog.hbm.xml"/> <mapping resource="org/jbpm/graph/log/ProcessInstanceCreateLog.hbm.xml"/> <mapping resource="org/jbpm/graph/log/ProcessInstanceEndLog.hbm.xml"/> <mapping resource="org/jbpm/graph/log/ProcessStateLog.hbm.xml"/> <mapping resource="org/jbpm/graph/log/SignalLog.hbm.xml"/> <mapping resource="org/jbpm/graph/log/TokenCreateLog.hbm.xml"/> <mapping resource="org/jbpm/graph/log/TokenEndLog.hbm.xml"/> <mapping resource="org/jbpm/graph/log/TransitionLog.hbm.xml"/> <mapping resource="org/jbpm/context/log/VariableLog.hbm.xml"/> <mapping resource="org/jbpm/context/log/VariableCreateLog.hbm.xml"/> <mapping resource="org/jbpm/context/log/VariableDeleteLog.hbm.xml"/> <mapping resource="org/jbpm/context/log/VariableUpdateLog.hbm.xml"/> <mapping resource="org/jbpm/context/log/variableinstance/ByteArrayUpdateLog.hbm.xml"/> <mapping resource="org/jbpm/context/log/variableinstance/DateUpdateLog.hbm.xml"/> <mapping resource="org/jbpm/context/log/variableinstance/DoubleUpdateLog.hbm.xml"/> <mapping resource="org/jbpm/context/log/variableinstance/HibernateLongUpdateLog.hbm.xml"/> <mapping resource="org/jbpm/context/log/variableinstance/HibernateStringUpdateLog.hbm.xml"/> <mapping resource="org/jbpm/context/log/variableinstance/LongUpdateLog.hbm.xml"/> <mapping resource="org/jbpm/context/log/variableinstance/StringUpdateLog.hbm.xml"/> <mapping resource="org/jbpm/taskmgmt/log/TaskLog.hbm.xml"/> <mapping resource="org/jbpm/taskmgmt/log/TaskCreateLog.hbm.xml"/> <mapping resource="org/jbpm/taskmgmt/log/TaskAssignLog.hbm.xml"/> <mapping resource="org/jbpm/taskmgmt/log/TaskEndLog.hbm.xml"/> <mapping resource="org/jbpm/taskmgmt/log/SwimlaneLog.hbm.xml"/> <mapping resource="org/jbpm/taskmgmt/log/SwimlaneCreateLog.hbm.xml"/> <mapping resource="org/jbpm/taskmgmt/log/SwimlaneAssignLog.hbm.xml"/> </session-factory> </hibernate-configuration> ---- edit --- I have already tried the hibernate.transaction.manager_lookup_class to set to the JBoss version (org.hibernate.transaction.JBossTransactionManagerLookup) it did not work...well it's not that suprising...I'll try now: org.hibernate.transaction.OC4JTransactionManagerLookup I tried with CMT instead of JTA, but it didn't work also.

  Read the article

• ORM in the realworld

  - by josh

  I am begining a new project that i think will last for some years. Am in the point of deciding the ORM framework to use (or whether to use one at all). Can anyone with experience tell me whether orm frameworks are used in realworld applications. The problem i have in mind is this: The orm tool will generate for me tables and columns etc as i create and modify my entities. However, after the project has gone live and is in production, certain database changes will not be possible. Can this hinder the advancement of the project. If i had used a framework like ibatis for example, i know i would only need to adjust the sql statements based on the database changes. Can someone tell me whether ORM tools have survived the live environment. At my office, we use java based ERP that was done long ago and it was never done using any ORM framework. Regards. Josh

  Read the article

• algorithm for image comparison

  - by Rajnikant

  Please consider following use case, I have one bigger image, lets called is master image. Now from some where else, I am getting one small image. I want to check whether this small image is subset of master image or not. important points are, smaller image might have different file format, smaller image might captured from comparatively different view. smaller image may have different light intensity. At this stage of algorithm/computation advancement, which level of accuracy I could expect? Any algorithm/open source implementation that would have such implementation? Thanks, Rajnikant

  Read the article

• Lessons from a SAN Failure

  - by Bill Graziano

  At 1:10AM Sunday morning the main SAN at one of my clients suffered a “partial” failure.  Partial means that the SAN was still online and functioning but the LUNs attached to our two main SQL Servers “failed”.  Failed means that SQL Server wouldn’t start and the MDF and LDF files mostly showed a zero file size.  But they were online and responding and most other LUNs were available.  I’m not sure how SANs know to fail at 1AM on a Saturday night but they seem to.  From a personal standpoint this worked out poorly: I was out with friends and after more than a few drinks.  From a work standpoint this was about the best time to fail you could imagine.  Everything was running well before Monday morning.  But it was a long, long Sunday.  I started tipsy, got tired and ended up hung over later in the day. Note to self: Try not to go out drinking right before the SAN fails. This caught us at an interesting time.  We’re in the process of migrating to an entirely new set of servers so some things were partially moved.  This made it difficult to follow our procedures as cleanly as we’d like.  The benefit was that we had much better documentation of everything on the server.  I would encourage everyone to really think through the process of implementing your DR plan and document as much as possible.  Following a checklist is much easier than trying to remember at night under pressure in a hurry after a few drinks. I had a series of estimates on how long things would take.  They were accurate for any single server failure.  They weren’t accurate for a SAN failure that took two servers down.  This wasn’t bad but we should have communicated better. Don’t forget how many things are outside the database.  Logins, linked servers, DTS packages (yikes!), jobs, service broker, DTC (especially DTC), database triggers and any objects in the master database are all things you need backed up.  We’d done a decent job on this and didn’t find significant problems here.  That said this still took a lot of time.  There were many annoyances as a result of this.  Small settings like a login’s default database had a big impact on whether an application could run.  This is probably the single biggest area of concern when looking to recreate a server.  I’d encourage everyone to go through every single node of SSMS and look for user created objects or settings outside the database. Script out your logins with the proper SID and already encrypted passwords and keep it updated.  This makes life so much easier.  I used an approach based on KB246133 that worked well.  I’ll get my scripts posted over the next few days. The disaster can cause your DR process to fail in unexpected ways.  We have a job that scripts out all logins and role memberships and writes it to a file.  This runs on the DR server and pulls from the production server.  Upon opening the file I found that the contents were a “server not found” error.  Fortunately we had other copies and didn’t need to try and restore the master database.  This now runs on the production server and pushes the script to the DR site.  Soon we’ll get it pushed to our version control software. One of the biggest challenges is keeping your DR resources up to date.  Any server change (new linked server, new SQL Server Agent job, etc.) means that your DR plan (and scripts) is out of date.  It helps to automate the generation of these resources if possible. Take time now to test your database restore process.  We test ours quarterly.  If you have a large database I’d also encourage you to invest in a compressed backup solution.  Restoring backups was the single larger consumer of time during our recovery. And yes, there’s a database mirroring solution planned in our new architecture. I didn’t have much involvement in things outside SQL Server but this caused many, many things to change in our environment.  Many applications today aren’t just executables or web sites.  They are a combination of those plus network infrastructure, reports, network ports, IP addresses, DTS and SSIS packages, batch systems and many other things.  These all needed a little bit of attention to make sure they were functioning properly. Profiler turned out to be a handy tool.  I started a trace for failed logins and kept that running.  That let me fix a number of problems before people were able to report them.  I also ran traces to capture exceptions.  This helped identify problems with linked servers. Overall the thing that gave me the most problem was linked servers.  In order for a linked server to function properly you need to be pointed to the right server, have the proper login information, have the network routes available and have MSDTC configured properly.  We have a lot of linked servers and this created many failure points.  Some of the older linked servers used IP addresses and not DNS names.  This meant we had to go in and touch all those linked servers when the servers moved.

  Read the article

• SQL SERVER – Example of Performance Tuning for Advanced Users with DB Optimizer

  - by Pinal Dave

  Performance tuning is such a subject that everyone wants to master it. In beginning everybody is at a novice level and spend lots of time learning how to master the art of performance tuning. However, as we progress further the tuning of the system keeps on getting very difficult. I have understood in my early career there should be no need of ego in the technology field. There are always better solutions and better ideas out there and we should not resist them. Instead of resisting the change and new wave I personally adopt it. Here is a similar example, as I personally progress to the master level of performance tuning, I face that it is getting harder to come up with optimal solutions. In such scenarios I rely on various tools to teach me how I can do things better. Once I learn about tools, I am often able to come up with better solutions when I face the similar situation next time. A few days ago I had received a query where the user wanted to tune it further to get the maximum out of the performance. I have re-written the similar query with the help of AdventureWorks sample database. SELECT * FROM HumanResources.Employee e INNER JOIN HumanResources.EmployeeDepartmentHistory edh ON e.BusinessEntityID = edh.BusinessEntityID INNER JOIN HumanResources.Shift s ON edh.ShiftID = s.ShiftID; User had similar query to above query was used in very critical report and wanted to get best out of the query. When I looked at the query – here were my initial thoughts Use only column in the select statements as much as you want in the application Let us look at the query pattern and data workload and find out the optimal index for it Before I give further solutions I was told by the user that they need all the columns from all the tables and creating index was not allowed in their system. He can only re-write queries or use hints to further tune this query. Now I was in the constraint box – I believe * was not a great idea but if they wanted all the columns, I believe we can’t do much besides using *. Additionally, if I cannot create a further index, I must come up with some creative way to write this query. I personally do not like to use hints in my application but there are cases when hints work out magically and gives optimal solutions. Finally, I decided to use Embarcadero’s DB Optimizer. It is a fantastic tool and very helpful when it is about performance tuning. I have previously explained how it works over here. First open DBOptimizer and open Tuning Job from File >> New >> Tuning Job. Once you open DBOptimizer Tuning Job follow the various steps indicates in the following diagram. Essentially we will take our original script and will paste that into Step 1: New SQL Text and right after that we will enable Step 2 for Generating Various cases, Step 3 for Detailed Analysis and Step 4 for Executing each generated case. Finally we will click on Analysis in Step 5 which will generate the report detailed analysis in the result pan. The detailed pan looks like. It generates various cases of T-SQL based on the original query. It applies various hints and available hints to the query and generate various execution plans of the query and displays them in the resultant. You can clearly notice that original query had a cost of 0.0841 and logical reads about 607 pages. Whereas various options which are just following it has different execution cost as well logical read. There are few cases where we have higher logical read and there are few cases where as we have very low logical read. If we pay attention the very next row to original query have Merge_Join_Query in description and have lowest execution cost value of 0.044 and have lowest Logical Reads of 29. This row contains the query which is the most optimal re-write of the original query. Let us double click over it. Here is the query: SELECT * FROM HumanResources.Employee e INNER JOIN HumanResources.EmployeeDepartmentHistory edh ON e.BusinessEntityID = edh.BusinessEntityID INNER JOIN HumanResources.Shift s ON edh.ShiftID = s.ShiftID OPTION (MERGE JOIN) If you notice above query have additional hint of Merge Join. With the help of this Merge Join query hint this query is now performing much better than before. The entire process takes less than 60 seconds. Please note that it the join hint Merge Join was optimal for this query but it is not necessary that the same hint will be helpful in all the queries. Additionally, if the workload or data pattern changes the query hint of merge join may be no more optimal join. In that case, we will have to redo the entire exercise once again. This is the reason I do not like to use hints in my queries and I discourage all of my users to use the same. However, if you look at this example, this is a great case where hints are optimizing the performance of the query. It is humanly not possible to test out various query hints and index options with the query to figure out which is the most optimal solution. Sometimes, we need to depend on the efficiency tools like DB Optimizer to guide us the way and select the best option from the suggestion provided. Let me know what you think of this article as well your experience with DB Optimizer. Please leave a comment. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Joins, SQL Optimization, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >