Search Results

Search found 27979 results on 1120 pages for 'network drive'.

Page 74/1120 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

• How do you confirm network adapter is gigabit capable?

  - by StrandedPirate

  Upgrading my network to gigabit speeds and don't know how to determine if the NIC in one of the systems is capable of gigabit speed. The documentation from the manufacturer states this: Network adapter 10/100/1000 Ethernet LAN on system board However when I go to the properties of the NIC under Speed & Duplex my only options are: 10 Mb Full 10 Mb Half 100 Mb Full 100 Mb Half Auto Is there a command line I can run that will give me more detail about the NIC? Windows 7 x64 OS New Info: The new switch I just bought has a light to indicate 1000Mbps. I can tell from the light that this NIC is indeed negotiating at 1000Mbps but I'd still like to know how to determine this from the console in windows.

  Read the article

• HP Probook 4530s great specs, but lagging. Hard Drive?

  - by Mark

  I have this laptop, which has a i3 processor, 4gb memory, 7200rpm hard drive. So there is nothing wrong with the specs. Even when I have no applications open, simply closing and opening windows, lags. Or opening the start menu, or dragging icons across the desktop. sometimes even the cursor lags. So I checked out the resource monitor, and the resources using disk activity are svchost Avast ------- my antivirus, but not much System (PID 4) ------ This is using a huge chunk The total disk activity fluctuates between %50 - %100

  Read the article

• Network printer - Print direct or via shared printer on Server?

  - by NickC

  It has occurred to me that a workstation can connect to a printer in two ways: 1). Printing directly to the IP of the printer with the print driver installed locally. 2). Printing to a \Server\Printer1 share with the print queue residing on the server. Question is which way is preferred? I would assume that printing directly to a network printer rather than going through the server would be the most efficient from the point of view of network traffic. On the other hand I guess a server printer share would be easier to manage with the correct driver automatically being downloaded to the workstations. Also what about using GPP (Server2012) to install this printer on the workstations, does that require any specific way?

  Read the article

• How to boot from a flash drive OS using VirtualBox?

  - by kokbira

  I have two flash drive, one with Slax installed and another for Android x86 Live installed, but they do not boot in my laptop (in my work they boot perfectly). I can boot from some live CDs/DVDs or its ISO files using VirtualBox, but I cannot do it for live flash drives - I put the flash drives and start a VirtualBox without any virtual HD, but VirtualBox does not recognize them as boot options, as it does for CDs/DVDs. Any ideas? Any alternatives if VirtualBox does not support it? Edit1: I'm using Windows (Windows 7) but I would like to know how to do it in Linux (Ubuntu, for example) too.

  Read the article

• Can I rebuild degraded RAID1 on a SAS 5 i controller with a larger mirror drive size?

  - by Kenny

  Hi, A drive failed on a Dell SAS 5i controller - see controller bios screengrab: http://imagebin.ca/view/SkZbszA.html The primary is a 160GB 10k sata drive. I added a 250GB 7k rpm drive in the hope that the array would rebuild onto this drive. This did not happen. (assuming that the controller would just operate at the speed of the slowest drive) The controller could see the new drive, but it didn't automatically rebuild the raid1 onto this drive. (my assumption is that it did not do this rebuild as the drive sizes are different). There was an option to add the new drive to the existing raid1 array - but when I tried this a message appeared stating that all data on the array would be lost. (I didn't get a screenshot of this message, I will later) Should the SAS 5i allow me to rebuild the array onto a larger drive? Is the option to add the drive to the array the right way to go? Many thanks!

  Read the article

• Is there a command line (or autohotkey) way of dismounting a USB drive?

  - by justintime

  I find dismounting a USB drive takes far too many mouse clicks for my liking. Is there are command line way of doing it (XP and Vista)? Addition I have an eye condition that makes hand mouse coordination difficult so any suggestion that there aren't too many clicks will be downvoted as not answering my question. However I use AutoHotkey a lot and one use case would be to call it from an AHK script. So if there is a way to code it in AHK that will do. Added this to the tags. Further question - is it safe to remove a disk when the computer is a. on Standby or b. Hibernated. I recall that W2000 got uspet if you pulled a disk from a hibernated machine. Or is it better to explicitly dismount or sync before you hibernate or standby - prabably in a script.

  Read the article

• Installing linux on a crippled machine via network boot?

  - by networkbooter

  I have a somewhat ancient Toshiba laptop (which can't boot from USB) that I want to install linux on (probably Ubuntu). I'm currently running Windows XP and Ubuntu via Wubi. I want to delete these OSs and replace with Ubuntu only. The laptop does have a network boot option. I'm wondering if the easiest way might be to setup a network boot server on my other computer (which runs Ubunutu) and boot the laptop from it. Could this allow me to install Linux on the laptop? I can't seem to find instructions on the 'net as to how to go about doing this.

  Read the article

• Can I lose files when changing security on an XP drive within Windows 7?

  - by Will

  Hard to come up with a title for this one, sheesh. Have a friend whose computer went down. He asked me to get all his data off his drive. His old computer was running XP. So, I've plugged it into my Windows 7 computer. When I attempt to open up his Documents and Settings folder, I get prompted to elevate in order to "permanently get access to this folder." If I do this, will I be able to access the files in this directory, or will all the current files be lost? I may be overly paranoid about this, but I can't find any information about exactly what will happen when I do this. TIA.

  Read the article

• Is it safe to run an operating system from an USB flash drive?

  - by Georg

  I've got a laptop that has a broken harddisk controller. Replacing the motherboard is quite expensive. I thought about buying a flash drive and installing & running the system from it. However, I'm concerned about some things. Speed: Are they fast enough for swap memory (I've got only 1GB RAM installed.) I'm considering buying 2 or 3 of them and making them into a RAID. What about limited write cycles? How long will it last for a system that has a filesystem with journaling enabled? I'd hate to abandon it. Are there significant differences between internal SSD which are used in modern laptops like MacBooks and USB flash drives? What should I expect in 10 years when the memory wear starts kicking in?

  Read the article

• ASA5505 Novice. Setting up Outside/Inside/and DMZ as Guest Network

  - by GriffJ

  I need a little help in developing a config for our ASA5505. I'm an MCSA/MCITPAS but I don't have a lot of practical cisco experience. Here is what I need help with, we currently have a PIX as our boarder gateway and well it's antiquated and it only has a 50 user license which means I'm constantly clearing local-host throughout the day as people complain. I discovered that the last IT person bought at couple ASA5505s and they've been sitting in the back of a cupboard. So far I've duplicated the configuration from the pix to the asa but as I was going to be going this far I thought I'd go further and remove another old cisco router that was used only for the guest network, I know the asa can do both jobs. So I'm going to paste a scenario I wrote up with the actual IPs changed to protect the innocent. ... Outside Network: 1.2.3.10 255.255.255.248 (we have a /29) Inside Network: 10.10.36.0 255.255.252.0 DMZ Network: 192.168.15.0 255.255.255.0 Outside Network on e0/0 DMZ Network on e0/1 Inside Network on e0/2-7 DMZ Network has DHCPD Enabled. DMZ DHCPD Pool is 192.168.15.50-192.168.15.250 DMZ Network needs to be able to see DNS on Inside Network at 10.10.37.11 and 10.10.37.12 DMZ Network needs to be able to access webmail on inside network at 10.10.37.15 DMZ Network needs to be able to access business website on inside network at 10.10.37.17 DMZ Network needs to be able to access the outside network (access to the internet). Inside Network has NO DHCPD. (dhcp is handled by domain controller) Inside Network needs to be able to see anything on the DMZ network. Inside Network needs to be able to access the outside network (access to the internet). There is some access-list stuff already, some static mapping already. Maps external IPs from our ISP to our inside server IPs static (inside,outside) 1.2.3.11 10.10.37.15 netmask 255.255.255.255 static (inside,outside) 1.2.3.12 10.10.37.17 netmask 255.255.255.255 static (inside,outside) 1.2.3.13 10.10.37.20 netmask 255.255.255.255 Allows access to our Webserver/Mailserver/VPN from the Outside. access-list 108 permit tcp any host 1.2.3.11 eq https access-list 108 permit tcp any host 1.2.3.11 eq smtp access-list 108 permit tcp any host 1.2.3.11 eq 993 access-list 108 permit tcp any host 1.2.3.11 eq 465 access-list 108 permit tcp any host 1.2.3.12 eq www access-list 108 permit tcp any host 1.2.3.12 eq https access-list 108 permit tcp any host 1.2.3.13 eq pptp Here is all the NAT and route stuff I have so far. global (outside) 1 interface global (outside) 2 1.2.3.11-1.2.3.14 netmask 255.255.255.248 nat (inside) 1 0.0.0.0 0.0.0.0 nat (dmz) 1 0.0.0.0 0.0.0.0 route outside 0.0.0.0 0.0.0.0 1.2.3.9 1

  Read the article

• When an Excel file is locked on a network share, how does it know who locked the file?

  - by ScottStonehouse

  We are using Excel 2010 and sometimes users are working from a network share. When a user on the network opens the file in Excel, the file is locked for editing - this is the expected behavior. When another user tries to open the file, Excel gives the message [filename] is locked for editing by 'John Doe' The problem is, the user is always this one particular user's name, no matter who actually has the file open. Where does Excel get this info, and how do I fix it? Update: I should have mentioned that in Excel, under Options (General), the correct user names have been set up. That is not where this user name is coming from.

  Read the article

• Is there a way to force Windows to recognize a network folder as a local drive, for the purposes of

  - by NoCatharsis

  I just started using the file search program Everything at work to search through documentation on our shared drives. This is after disappointments with Google Desktop and Windows Search. I love the speed of Everything, but I wish it were able to index other shared folders. My makeshift solution was to somehow force Windows to recognize the necessary shared folders as local drives, then add them to the index list. I have also considered using SyncToy, but this requires downloading all data to my drive, which could be terabytes of information - obviously not a good idea on a small company network. What would be the best solution here?

  Read the article

• A gigabit network interface is CPU-limited to 25MB/s. How can I maximize the throughput?

  - by netvope

  I have a Acer Aspire R1600-U910H with a nForce gigabit network adapter. The maximum TCP throughput of it is about 25MB/s, and apparently it is limited by the single core Intel Atom 230; when the maximum throughput is reached, the CPU usage is about 50%-60%, which corresponds to full utilization considering this is a Hyper-threading enabled CPU. The same problem occurs on both Windows XP and on Ubuntu 8.04. On Windows, I have installed the latest nForce chipset driver, disabled power saving features, and enabled checksum offload. On Linux, the default driver has checksum offload enabled. There is no Linux driver available on Nvidia's website. ethtool -k eth0 shows that checksum offload is enabled: Offload parameters for eth0: rx-checksumming: on tx-checksumming: on scatter-gather: on tcp segmentation offload: on udp fragmentation offload: off generic segmentation offload: off The following is the output of powertop when the network is idle: Wakeups-from-idle per second : 61.9 interval: 10.0s no ACPI power usage estimate available Top causes for wakeups: 90.9% (101.3) <interrupt> : eth0 4.5% ( 5.0) iftop : schedule_timeout (process_timeout) 1.8% ( 2.0) <kernel core> : clocksource_register (clocksource_watchdog) 0.9% ( 1.0) dhcdbd : schedule_timeout (process_timeout) 0.5% ( 0.6) <kernel core> : neigh_table_init_no_netlink (neigh_periodic_timer) And when the maximum throughput of about 25MB/s is reached: Wakeups-from-idle per second : 11175.5 interval: 10.0s no ACPI power usage estimate available Top causes for wakeups: 99.9% (22097.4) <interrupt> : eth0 0.0% ( 5.0) iftop : schedule_timeout (process_timeout) 0.0% ( 2.0) <kernel core> : clocksource_register (clocksource_watchdog) 0.0% ( 1.0) dhcdbd : schedule_timeout (process_timeout) 0.0% ( 0.6) <kernel core> : neigh_table_init_no_netlink (neigh_periodic_timer) Notice the 20000 interrupts per second. Could this be the cause for the high CPU usage and low throughput? If so, how can I improve the situation? As a reference, the other computers in the network can usually transfer at 50+MB/s without problems. A computer with a Core 2 CPU generates only 5000 interrupts per second when it's transferring at 110MB/s. The number of interrupts is about 20 times less than the Atom system (if interrupts scale linearly with throughput.) And a minor question: How can I find out what is the driver in use for eth0?

  Read the article

• Building a network at home, what cables to use (if any)?

  - by Faruz

  My house is currently in ruins and am building it. While doing so, I wanted to design a home network. My main objectives are surfing and HD streaming. The house is one-level, 100 sq/m (about 300 sq/ft), and one of the rooms is a safety room with Reinforced concrete walls. About a year ago, when I started planning, I thought about putting Cat 6 STP cables in the walls and create network points in the rooms. Should I use STP or FTP? I heard that STP is a problem regarding connectors and stuff. Is it really beneficial? Will it work OK if I transfer the wire together with the telephone line? Should I maybe go with WLan and count on 802.11n to enable me to stream HD across the house? is 802.11n that good?

  Read the article

• How to Create a shortcut to files / folders on a drive with different / changing letters (root)?

  - by Rolo

  I have seen this question asked and answered many times but the location one usually desires to create the shortcut is on the actual drive with the different letters. I would like to create the shortcut on the drive with the permanent letter. So, let me explain further. I have a C Drive and a G Drive. The C Drive is always C and it's on a Windows XP computer. The G drive may be G today, but H tomorrow. How can I create a permanently working shortcut on the C Drive that points to the G, sometimes H, external hard drive? P.S. I am referring to an external hard drive, but I would also (not instead) be interested in the answer if it were a usb flash drive. (Keep in mind the shortcut is being created on the drive with the permanent letter). Thanks.

  Read the article

• C drive should only contain OS. Myth or fact?

  - by Fasih Khatib

  So, I have a 500GB HDD @7200RPM. It is split as: C: 97GB D: 179GB E: 188GB My belief is to keep OS ONLY in C:\ and any adamant programs that won't go anywhere apart from C:\ [because this speeds up the PC during startup process] and install programs in D:\ so that in case I have to reinstall the OS, I will have the programs readily available after reinstall. But I have begun to think this approach is flawed because if C:\ is formatted, I will lose registry values and stuff that goes in %appdata% and so it is no use keeping programs in D:/ drive because they will be useless after all. Should I go ahead and install ALL of my programs in C:\ and then use D:\ and E:\ for storing my data like photos, text files, java files n all? How will this impact the performance of the HDD? I only have 3 programs in D:\Program Files so it will be easy to reinstall them :)

  Read the article

• I'd like to archive files from Ubuntu to Windows between two computers on a shared home network

  - by Wabbitseason

  I have an old laptop running Ubuntu 9.10 which I use as a LAMP environment for web development, and I have a comfortable, powerful desktop computer with Windows 7 installed on it. These two are connected to a home router so both can access the internet. I have been able to set up Samba so I can mount my Apache home directory so it is accessible from Windows and is mapped as a network drive. What I'd like to do is access some Windows folders from Linux so I could automatically create backups (with cron scripts) of my work to physically different locations on the Windows box. Perhaps at a later time I'd set up a local Subversion repository but I'd love to keep backups of that on the Windows drives too. Using Ubuntu's Places/Network menu I can see my desktop but I'm unable to log in to that despite having created the corrent username and password on Windows. All I can get is the following error message: "Unable to mount location. Failed to retrieve share list from server." What could be misconfigurated?

  Read the article

• My Portable Hard Drive with USB3 didn't work when connected to My Laptop, but it working with USB2 properly

  - by Mohammad Hasan Esfahanian

  I have Western Digital My Passport Essential Portable Hard Drive with USB3 and Model:WDBACY5000ABK-EESN. Until about two or three months ago when I connected that to My Laptop USB3 port, that worked very well. But now when I'm connecting that to My device, The system does not detect any Hard Drives. When plug in the USB2 port is working properly. I connected that to another Laptop whit USB3 port but I had the same problem. I tested My Laptop port with a Flash Memory by USB3 and ports were healthy and I'm sure they are working. For this issue, I changed the windows, but it still did not work. What can I do? Thanks in advance.

  Read the article

• Is there a limit of max. number of files in external hard drive folder?

  - by tfs

  I have a FAT32 external hard drive where I keep backups downloaded from webserver. I have a directory with 30 subdirectories. One of the subdirectories contains 21381 files and when I try to copy more files into this directory I get 0x80070052 error. However,it's possible to copy one more file in this directory (only one) if I make it's name shorter (8 characters instead of 22 as it's original name). How do I solve this problem? Now I can not synchronize external hard disk files with server files which is very important for me.

  Read the article

• 2 identical PCs - can I swap a single hard drive between and expect Windows 7/XP to work?

  - by rgvcorley

  I currently work in 2 different locations, traveling between the 2 every few weeks or so. I currently have screens, kb, mouse etc... in both locations, so I just pick up my tower case when I want to move to the other location. However to make moving easier I was thinking of buying 2 tower cases with hot swappable drive bays on the front and installing identical hardware in each one. This would allow me to pull the drives out and just take them with me and plug them into the PC at the other location. Would windows 7 complain? I'm not fussed about buying licenses for both PCs, but would I have any problems with drivers due to the different serial numbers of the components?

  Read the article

• Using a Token-ring network card instead of a router (?)

  - by John

  I have cable, and the modem only has 1 network plug-in. They said I could buy my own router if I wanted to hook up two computers to it. I have an IBM Turbo 16/4 Token-Ring PC Card 2, which was in the laptop when I bought it, and the laptop also has the typical network plug (not a PC Card). Is there a way I could run the laptop as a server, and plug my desktop into the laptop, so they both have internet without my having to buy a router? (I realize routers are as cheap as $30.) Both computers run Windows XP Pro SP3. (I also have an 10/100 Etherjet Cardbus card (PC Card)). Thanks.

  Read the article

• 2 identical PCs - can I swap a single hard drive between and expect Windows 7 to work? [closed]

  - by rgvcorley

  I currently work in 2 different locations, traveling between the 2 every few weeks or so. I currently have screens, kb, mouse etc... in both locations, so I just pick up my tower case when I want to move to the other location. However to make moving easier I was thinking of buying 2 tower cases with hot swappable drive bays on the front and installing identical hardware in each one. This would allow me to pull the drives out and just take them with me and plug them into the PC at the other location. Would windows 7 complain? I'm not fussed about buying licenses for both PCs, but would I have any problems with drivers due to the different serial numbers of the components?

  Read the article

• How to add network printer remotely without knowing the IP?

  - by Steve

  Assume your friend from over 100km away asked you to add a network printer to his computer since you're so tech savvy. How would you add network printer remotely in this case? You would need: 0. Remote connection to your friend's computer 1. Printer IP and brand/model names 2. Respective drivers downloaded either from manufacturer's website or Windows Update driver Question is, how would you find out the IP address of the printer without bothering your friend too much with technical steps? Since your friend isn't as tech savvy as you - they wouldn't know which buttons to press to get IP address.

  Read the article

• Why do I have inconsistent network issues with my laptop's wireless?

  - by Jason

  I'm having trouble with my laptop Internet connection. It's patchy at best and resets or freezes a lot. The signal strength is also random. I thought it might be a driver issue but now I don't know. Three other computers using the same wireless network run well. I've switched out wireless routers so I don't think it's the router. I thought it might be the laptop's internal wireless card but I just bought an external USB network card and I'm still having problems. Specs Lenovo T-60p Windows 7 Ultimate Edition Patches/drivers are up to date I only use one of the below at a time, disabling the other: Intel PRO/Wireless 3945ABG v. 13.3.0.137 (Internal wireless) Medialink Wireless-N USB 2.0 Adapter (USB wireless) Any ideas on what might be the problem?

  Read the article

• Total network data sent/received of a non-daemon Linux process?

  - by leden

  I'm looking for a simple and effective way of measuring total bytes received/sent from a single process upon its termination. Basically, I am looking for a tool which has the interface similar to "time" and "/usr/bin/time", e.g. measure-net-data <prog_to_run> <prog_args> Received (b): XYZ Sent (b): ABC I know that there are many tools for bandwidth/network monitoring, but as far I can tell all of them are performing the measurements it real-time, which is inappropriate not only because of overhead but also because of the inconvenience - I would need to stop the program, capture the output of the tool and then kill it. I have seen that newer versions of Linux 2.6.20+ provide /proc/<pid>/io/ which contain the information I'm looking for; however, everything under /proc/<pid> when the process terminates, so I'm again back to the same problem as with any network monitoring tool.

  Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >