Search Results

Search found 2024 results on 81 pages for 'screenshot'.

Page 74/81 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

• Need help troubleshooting highly variable ping times

  - by Elliot.Bradshaw

  I'm at work using Citrix (think Remote Desktop) to connect to client sites. With my job I have to write a fair bit of code while I'm connected remotely via Citrix, so the latency of my internet connection is important. If I'm getting ping times above 250ms, then it becomes almost impossible to scroll, click or type with accuracy. Recently my Comcast business internet has been exhibiting highly variable ping times. If I ping google.com, I'll get pings that range from 9ms all the way up to 1300ms. The problem seems to be at its worst during the hours of 1PM to 4:30PM. Outside of those hours and the variance in pings settles down, mostly between 9ms and 50ms. The signal to noise ratio and upstream power are both fine on my modem--the values are here: http://pastebin.com/D4hWGPXf I ran a trace route from my computer to google.com (the results of which are here: http://pastebin.com/GcdjYvMh) and did another test ping to the IP of the first hop outside of our local network (73.98.44.1)--the variance in ping times existed in exactly the same manner as if I were pinging Google. Connecting directly to the cable modem by CAT5 makes no difference. Here is a screenshot demonstrating the variance of the ping times: http://postimage.org/image/haocdeauv/full/ -- as you can see it can get pretty bad. Three Comcast techs have been out (two of them were here when the problem wasn't happening) and they as well as the regional tier 2 Comcast support were unable to diagnose the problem. I now have a ticket open with tier 3 support, but have yet to hear back from them. Does anyone know what could cause these sorts of problems or have any idea from the traceroute above where it could be originating? The regional tier 2 guy tried to tell me that what I'm seeing is normal--are highly variable ping times like that ever acceptable? Anything I should ask Comcast to do or look at to get this problem fixed? Any tips/advice much appreciated! Edit: This is Comcast cable internet at a small start-up, we've ruled out congestion in our private LAN as a cause (i.e., no one's watching YouTube when the pings become variable). Update: Tier 3 Comcast support advised swapping out the modem, a tech came here today and did that--same problem persists.

  Read the article

• Java Port Socket Programming Error

  - by atrus-darkstone

  Hi- I have been working on a java client-server program using port sockets. The goal of this program is for the client to take a screenshot of the machine it is running on, break the RGB info of this image down into integers and arrays, then send this info over to the server, where it is reconstructed into a new image file. However, when I run the program I am experiencing the following two bugs: The first number recieved by the server, no matter what its value is according to the client, is always 49. The client only sends(or the server only receives?) the first value, then the program hangs forever. Any ideas as to why this is happening, and what I can do to fix it? The code for both client and server is below. Thanks! CLIENT: import java.awt.*; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.awt.image.BufferedImage; import java.io.*; import java.net.Socket; import java.text.SimpleDateFormat; import java.util.*; import javax.swing.*; import javax.swing.Timer; public class ViewerClient implements ActionListener{ private Socket vSocket; private BufferedReader in; private PrintWriter out; private Robot robot; // static BufferedReader orders = null; public ViewerClient() throws Exception{ vSocket = null; in = null; out = null; robot = null; } public void setVSocket(Socket vs) { vSocket = vs; } public void setInput(BufferedReader i) { in = i; } public void setOutput(PrintWriter o) { out = o; } public void setRobot(Robot r) { robot = r; } /*************************************************/ public Socket getVSocket() { return vSocket; } public BufferedReader getInput() { return in; } public PrintWriter getOutput() { return out; } public Robot getRobot() { return robot; } public void run() throws Exception{ int speed = 2500; int pause = 5000; Timer timer = new Timer(speed, this); timer.setInitialDelay(pause); // System.out.println("CLIENT: Set up timer."); try { setVSocket(new Socket("Alex-PC", 4444)); setInput(new BufferedReader(new InputStreamReader(getVSocket().getInputStream()))); setOutput(new PrintWriter(getVSocket().getOutputStream(), true)); setRobot(new Robot()); // System.out.println("CLIENT: Established connection and IO ports."); // timer.start(); captureScreen(nameImage()); }catch(Exception e) { System.err.println(e); } } public void captureScreen(String fileName) throws Exception{ Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize(); Rectangle screenRectangle = new Rectangle(screenSize); BufferedImage image = getRobot().createScreenCapture(screenRectangle); int width = image.getWidth(); int height = image.getHeight(); int[] pixelData = new int[(width * height)]; image.getRGB(0,0, width, height, pixelData, width, height); byte[] imageData = new byte[(width * height)]; String fromServer = null; if((fromServer = getInput().readLine()).equals("READY")) { sendWidth(width); sendHeight(height); sendArrayLength((width * height)); sendImageInfo(fileName); sendImageData(imageData); } /* System.out.println(imageData.length); String fromServer = null; for(int i = 0; i < pixelData.length; i++) { imageData[i] = ((byte)pixelData[i]); } System.out.println("CLIENT: Pixel data successfully converted to byte data."); System.out.println("CLIENT: Waiting for ready message..."); if((fromServer = getInput().readLine()).equals("READY")) { System.out.println("CLIENT: Ready message recieved."); getOutput().println("SENDING ARRAY LENGTH..."); System.out.println("CLIENT: Sending array length..."); System.out.println("CLIENT: " + imageData.length); getOutput().println(imageData.length); System.out.println("CLIENT: Array length sent."); getOutput().println("SENDING IMAGE..."); System.out.println("CLIENT: Sending image data..."); for(int i = 0; i < imageData.length; i++) { getOutput().println(imageData[i]); } System.out.println("CLIENT: Image data sent."); getOutput().println("SENDING IMAGE WIDTH..."); System.out.println("CLIENT: Sending image width..."); getOutput().println(width); System.out.println("CLIENT: Image width sent."); getOutput().println("SENDING IMAGE HEIGHT..."); System.out.println("CLIENT: Sending image height..."); getOutput().println(height); System.out.println("CLIENT: Image height sent..."); getOutput().println("SENDING IMAGE INFO..."); System.out.println("CLIENT: Sending image info..."); getOutput().println(fileName); System.out.println("CLIENT: Image info sent."); getOutput().println("FINISHED."); System.out.println("Image data sent successfully."); } if((fromServer = getInput().readLine()).equals("CLOSE DOWN")) { getOutput().close(); getInput().close(); getVSocket().close(); } */ } public String nameImage() throws Exception { String dateFormat = "yyyy-MM-dd HH-mm-ss"; Calendar cal = Calendar.getInstance(); SimpleDateFormat sdf = new SimpleDateFormat(dateFormat); String fileName = sdf.format(cal.getTime()); return fileName; } public void sendArrayLength(int length) throws Exception { getOutput().println("SENDING ARRAY LENGTH..."); getOutput().println(length); } public void sendWidth(int width) throws Exception { getOutput().println("SENDING IMAGE WIDTH..."); getOutput().println(width); } public void sendHeight(int height) throws Exception { getOutput().println("SENDING IMAGE HEIGHT..."); getOutput().println(height); } public void sendImageData(byte[] imageData) throws Exception { getOutput().println("SENDING IMAGE..."); for(int i = 0; i < imageData.length; i++) { getOutput().println(imageData[i]); } } public void sendImageInfo(String info) throws Exception { getOutput().println("SENDING IMAGE INFO..."); getOutput().println(info); } public void actionPerformed(ActionEvent a){ String message = null; try { if((message = getInput().readLine()).equals("PROCESSING...")) { if((message = getInput().readLine()).equals("IMAGE RECIEVED SUCCESSFULLY.")) { captureScreen(nameImage()); } } }catch(Exception e) { JOptionPane.showMessageDialog(null, "Problem: " + e); } } } SERVER: import java.awt.image.BufferedImage; import java.io.*; import java.net.*; import javax.imageio.ImageIO; /*IMPORTANT TODO: * 1. CLOSE ALL STREAMS AND SOCKETS WITHIN CLIENT AND SERVER! * 2. PLACE MAIN EXEC CODE IN A TIMED WHILE LOOP TO SEND FILE EVERY X SECONDS * */ public class ViewerServer { private ServerSocket vServer; private Socket vClient; private PrintWriter out; private BufferedReader in; private byte[] imageData; private int width; private int height; private String imageInfo; private int[] rgbData; private boolean active; public ViewerServer() throws Exception{ vServer = null; vClient = null; out = null; in = null; imageData = null; width = 0; height = 0; imageInfo = null; rgbData = null; active = true; } public void setVServer(ServerSocket vs) { vServer = vs; } public void setVClient(Socket vc) { vClient = vc; } public void setOutput(PrintWriter o) { out = o; } public void setInput(BufferedReader i) { in = i; } public void setImageData(byte[] imDat) { imageData = imDat; } public void setWidth(int w) { width = w; } public void setHeight(int h) { height = h; } public void setImageInfo(String im) { imageInfo = im; } public void setRGBData(int[] rd) { rgbData = rd; } public void setActive(boolean a) { active = a; } /***********************************************/ public ServerSocket getVServer() { return vServer; } public Socket getVClient() { return vClient; } public PrintWriter getOutput() { return out; } public BufferedReader getInput() { return in; } public byte[] getImageData() { return imageData; } public int getWidth() { return width; } public int getHeight() { return height; } public String getImageInfo() { return imageInfo; } public int[] getRGBData() { return rgbData; } public boolean getActive() { return active; } public void run() throws Exception{ connect(); setActive(true); while(getActive()) { recieve(); } close(); } public void recieve() throws Exception{ String clientStatus = null; int clientData = 0; // System.out.println("SERVER: Sending ready message..."); getOutput().println("READY"); // System.out.println("SERVER: Ready message sent."); if((clientStatus = getInput().readLine()).equals("SENDING IMAGE WIDTH...")) { setWidth(getInput().read()); System.out.println("Width: " + getWidth()); } if((clientStatus = getInput().readLine()).equals("SENDING IMAGE HEIGHT...")) { setHeight(getInput().read()); System.out.println("Height: " + getHeight()); } if((clientStatus = getInput().readLine()).equals("SENDING ARRAY LENGTH...")) { clientData = getInput().read(); setImageData(new byte[clientData]); System.out.println("Array length: " + clientData); } if((clientStatus = getInput().readLine()).equals("SENDING IMAGE INFO...")) { setImageInfo(getInput().readLine()); System.out.println("Image Info: " + getImageInfo()); } if((clientStatus = getInput().readLine()).equals("SENDING IMAGE...")) { for(int i = 0; i < getImageData().length; i++) { getImageData()[i] = ((byte)getInput().read()); } } if((clientStatus = getInput().readLine()).equals("FINISHED.")) { getOutput().println("PROCESSING..."); setRGBData(new int[getImageData().length]); for(int i = 0; i < getRGBData().length; i++) { getRGBData()[i] = getImageData()[i]; } BufferedImage image = null; image.setRGB(0, 0, getWidth(), getHeight(), getRGBData(), getWidth(), getHeight()); ImageIO.write(image, "png", new File(imageInfo + ".png")); //create an image file out of the screenshot getOutput().println("IMAGE RECIEVED SUCCESSFULLY."); } } public void connect() throws Exception { setVServer(new ServerSocket(4444)); //establish server connection // System.out.println("SERVER: Connection established."); setVClient(getVServer().accept()); //accept client connection request // System.out.println("SERVER: Accepted connection request."); setOutput(new PrintWriter(vClient.getOutputStream(), true)); //set up an output channel setInput(new BufferedReader(new InputStreamReader(vClient.getInputStream()))); //set up an input channel // System.out.println("SERVER: Created IO ports."); } public void close() throws Exception { getOutput().close(); getInput().close(); getVClient().close(); getVServer().close(); } }

  Read the article

• Update Manager unable to get updates

  - by dPEN

  In last few days my Ubuntu 11.10 update manager is unable to get new updates. When I checked update log I saw that for couple of updates it says "Network isn't available". For other updates it downloaded logs and and internet connection also works fine. Unable to attached screenshot due to SPAM prevention policy. But for below Release gpgv:/var/lib/apt/lists/partial/extras.ubuntu.com_ubuntu_dists_oneiric_Release.gpg it says "Network isn't available" For all other Releases it is downloading fine. And due to this I dont see any update available in last 10 days. LOG OF sudo apt-get update: dipen@EIDLCPU1018:~$ sudo apt-get update [sudo] password for dipen: Ign http:/extras.ubuntu.com oneiric InRelease Ign http:/archive.canonical.com oneiric InRelease Ign http:/archive.canonical.com lucid InRelease Get:1 http:/extras.ubuntu.com oneiric Release.gpg [72 B] Get:2 http:/archive.canonical.com oneiric Release.gpg [198 B] Hit http:/extras.ubuntu.com oneiric Release Get:3 http:/archive.canonical.com lucid Release.gpg [198 B] Err http:/extras.ubuntu.com oneiric Release Hit http:/archive.canonical.com oneiric Release Ign http:/archive.canonical.com oneiric Release Hit http:/archive.canonical.com lucid Release Ign http:/archive.canonical.com lucid Release Ign http:/archive.canonical.com oneiric/partner i386 Packages/DiffIndex Ign http:/archive.canonical.com oneiric/partner TranslationIndex Ign http:/archive.canonical.com lucid/partner i386 Packages/DiffIndex Ign http:/archive.canonical.com lucid/partner TranslationIndex Hit http:/archive.canonical.com oneiric/partner i386 Packages Hit http:/archive.canonical.com lucid/partner i386 Packages Ign http:/dl.google.com stable InRelease Ign http:/archive.canonical.com oneiric/partner Translation-en_IN Ign http:/archive.canonical.com oneiric/partner Translation-en Ign http:/archive.canonical.com lucid/partner Translation-en_IN Ign http:/archive.canonical.com lucid/partner Translation-en Ign http:/in.archive.ubuntu.com oneiric InRelease Ign http:/in.archive.ubuntu.com oneiric-updates InRelease Ign http:/in.archive.ubuntu.com oneiric-security InRelease Get:4 http//dl.google.com stable Release.gpg [198 B] Get:5 http//in.archive.ubuntu.com oneiric Release.gpg [198 B] Get:6 http//in.archive.ubuntu.com oneiric-updates Release.gpg [198 B] Get:7 http//in.archive.ubuntu.com oneiric-security Release.gpg [198 B] Hit http:/in.archive.ubuntu.com oneiric Release Ign http:/in.archive.ubuntu.com oneiric Release Hit http:/in.archive.ubuntu.com oneiric-updates Release Err http:/in.archive.ubuntu.com oneiric-updates Release Hit http:/in.archive.ubuntu.com oneiric-security Release Ign http:/in.archive.ubuntu.com oneiric-security Release Ign http:/in.archive.ubuntu.com oneiric/main i386 Packages/DiffIndex Ign http:/in.archive.ubuntu.com oneiric/restricted i386 Packages/DiffIndex Ign http:/in.archive.ubuntu.com oneiric/universe i386 Packages/DiffIndex Ign http:/in.archive.ubuntu.com oneiric/multiverse i386 Packages/DiffIndex Hit http:/in.archive.ubuntu.com oneiric/main TranslationIndex Hit http:/in.archive.ubuntu.com oneiric/multiverse TranslationIndex Hit http:/in.archive.ubuntu.com oneiric/restricted TranslationIndex Hit http:/in.archive.ubuntu.com oneiric/universe TranslationIndex Ign http:/in.archive.ubuntu.com oneiric-security/main i386 Packages/DiffIndex Ign http:/in.archive.ubuntu.com oneiric-security/restricted i386 Packages/DiffIndex Ign http:/in.archive.ubuntu.com oneiric-security/universe i386 Packages/DiffIndex Ign http:/in.archive.ubuntu.com oneiric-security/multiverse i386 Packages/DiffIndex Hit http:/in.archive.ubuntu.com oneiric-security/main TranslationIndex Hit http:/in.archive.ubuntu.com oneiric-security/multiverse TranslationIndex Hit http:/in.archive.ubuntu.com oneiric-security/restricted TranslationIndex Hit http:/in.archive.ubuntu.com oneiric-security/universe TranslationIndex Hit http:/in.archive.ubuntu.com oneiric/main i386 Packages Hit http:/in.archive.ubuntu.com oneiric/restricted i386 Packages Hit http:/in.archive.ubuntu.com oneiric/universe i386 Packages Hit http:/in.archive.ubuntu.com oneiric/multiverse i386 Packages Hit http:/in.archive.ubuntu.com oneiric/main Translation-en Hit http:/in.archive.ubuntu.com oneiric/multiverse Translation-en Hit http:/in.archive.ubuntu.com oneiric/restricted Translation-en Hit http:/in.archive.ubuntu.com oneiric/universe Translation-en Hit http:/in.archive.ubuntu.com oneiric-security/main i386 Packages Hit http:/in.archive.ubuntu.com oneiric-security/restricted i386 Packages Hit http:/in.archive.ubuntu.com oneiric-security/universe i386 Packages Hit http:/in.archive.ubuntu.com oneiric-security/multiverse i386 Packages Hit http:/in.archive.ubuntu.com oneiric-security/main Translation-en Hit http:/in.archive.ubuntu.com oneiric-security/multiverse Translation-en Get:8 http//dl.google.com stable Release [1,347 B] Hit http:/in.archive.ubuntu.com oneiric-security/restricted Translation-en Hit http:/in.archive.ubuntu.com oneiric-security/universe Translation-en Get:9 http//dl.google.com stable/main i386 Packages [1,214 B] Ign http:/dl.google.com stable/main TranslationIndex Ign http:/dl.google.com stable/main Translation-en_IN Ign http:/dl.google.com stable/main Translation-en Fetched 3,821 B in 41s (91 B/s) Reading package lists... Done W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http:/extras.ubuntu.com oneiric Release: The following signatures were invalid: BADSIG 16126D3A3E5C1192 Ubuntu Extras Archive Automatic Signing Key <[email protected]> W: GPG error: http:/archive.canonical.com oneiric Release: The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key <[email protected]> W: GPG error: http:/archive.canonical.com lucid Release: The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key <[email protected]> W: GPG error: http:/in.archive.ubuntu.com oneiric Release: The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key <[email protected]> W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http:/in.archive.ubuntu.com oneiric-updates Release: The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key <[email protected]> W: GPG error: http:/in.archive.ubuntu.com oneiric-security Release: The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key <[email protected]> W: Failed to fetch http:/extras.ubuntu.com/ubuntu/dists/oneiric/Release W: Failed to fetch http:/in.archive.ubuntu.com/ubuntu/dists/oneiric-updates/Release W: Some index files failed to download. They have been ignored, or old ones used instead. dipen@EIDLCPU1018:~$ LOG of sudo apt-get upgrade: dipen@EIDLCPU1018:~$ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done The following packages have been kept back: ghc6-doc haskell-zlib-doc libghc6-zlib-doc 0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded. dipen@EIDLCPU1018:~$ /etc/apt/sources.list: deb http:/in.archive.ubuntu.com/ubuntu/ oneiric main restricted deb http:/in.archive.ubuntu.com/ubuntu/ oneiric-updates main restricted deb http:/in.archive.ubuntu.com/ubuntu/ oneiric universe deb http:/in.archive.ubuntu.com/ubuntu/ oneiric-updates universe deb http:/in.archive.ubuntu.com/ubuntu/ oneiric multiverse deb http:/in.archive.ubuntu.com/ubuntu/ oneiric-updates multiverse deb http:/archive.canonical.com/ubuntu oneiric partner deb http:/in.archive.ubuntu.com/ubuntu/ oneiric-security main restricted deb http:/in.archive.ubuntu.com/ubuntu/ oneiric-security universe deb http:/in.archive.ubuntu.com/ubuntu/ oneiric-security multiverse deb http:/extras.ubuntu.com/ubuntu oneiric main #Third party developers repository deb http:/archive.canonical.com/ lucid partner

  Read the article

• SSAS: Using fake dimension and scopes for dynamic ranges

  - by DigiMortal

  In one of my BI projects I needed to find count of objects in income range. Usual solution with range dimension was useless because range where object belongs changes in time. These ranges depend on calculation that is done over incomes measure so I had really no option to use some classic solution. Thanks to SSAS forums I got my problem solved and here is the solution. The problem – how to create dynamic ranges? I have two dimensions in SSAS cube: one for invoices related to objects rent and the other for objects. There is measure that sums invoice totals and two calculations. One of these calculations performs some computations based on object income and some other object attributes. Second calculation uses first one to define income ranges where object belongs. What I need is query that returns me how much objects there are in each group. I cannot use dimension for range because on one date object may belong to one range and two days later to another income range. By example, if object is not rented out for two days it makes no money and it’s income stays the same as before. If object is rented out after two days it makes some income and this income may move it to another income range. Solution – fake dimension and scopes Thanks to Gerhard Brueckl from pmOne I got everything work fine after some struggling with BI Studio. The original discussion he pointed out can be found from SSAS official forums thread Create a banding dimension that groups by a calculated measure. Solution was pretty simple by nature – we have to define fake dimension for our range and use scopes to assign values for object count measure. Object count measure is primitive – it just counts objects and that’s it. We will use it to find out how many objects belong to one or another range. We also need table for fake ranges and we have to fill it with ranges used in ranges calculation. After creating the table and filling it with ranges we can add fake range dimension to our cube. Let’s see now how to solve the problem step-by-step. Solving the problem Suppose you have ranges calculation defined like this: CASE WHEN [Measures].[ComplexCalc] < 0 THEN 'Below 0'WHEN [Measures].[ComplexCalc] >=0 AND  [Measures].[ComplexCalc] <=50 THEN '0 - 50'...END Let’s create now new table to our analysis database and name it as FakeIncomeRange. Here is the definition for table: CREATE TABLE [FakeIncomeRange] (     [range_id] [int] IDENTITY(1,1) NOT NULL,     [range_name] [nvarchar](50) NOT NULL,     CONSTRAINT [pk_fake_income_range] PRIMARY KEY CLUSTERED      (         [range_id] ASC     ) ) Don’t forget to fill this table with range labels you are using in ranges calculation. To use ranges from table we have to add this table to our data source view and create new dimension. We cannot bind this table to other tables but we have to leave it like it is. Our dimension has two attributes: ID and Name. The next thing to create is calculation that returns objects count. This calculation is also fake because we override it’s values for all ranges later. Objects count measure can be defined as calculation like this: COUNT([Object].[Object].[Object].members) Now comes the most crucial part of our solution – defining the scopes. Based on data used in this posting we have to define scope for each of our ranges. Here is the example for first range. SCOPE([FakeIncomeRange].[Name].&[Below 0], [Measures].[ObjectCount])     This=COUNT(            FILTER(                [Object].[Object].[Object].members,                 [Measures].[ComplexCalc] < 0          )     ) END SCOPE To get these scopes defined in cube we need MDX script blocks for each line given here. Take a look at the screenshot to get better idea what I mean. This example is given from SQL Server books online to avoid conflicts with NDA. :) From previous example the lines (MDX scripts) are: Line starting with SCOPE Block for This = Line with END SCOPE And now it is time to deploy and process our cube. Although you may see examples where there are semicolons in the end of statements you don’t need them. Visual Studio BI tools generate separate command from each script block so you don’t need to worry about it.

  Read the article

• Enabling Http caching and compression in IIS 7 for asp.net websites

  - by anil.kasalanati

  Caching – There are 2 ways to set Http caching 1-      Use Max age property 2-      Expires header. Doing the changes via IIS Console – 1.       Select the website for which you want to enable caching and then select Http Responses in the features tab       2.       Select the Expires webcontent and on changing the After setting you can generate the max age property for the cache control    3.       Following is the screenshot of the headers   Then you can use some tool like fiddler and see 302 response coming from the server. Doing it web.config way – We can add static content section in the system.webserver section <system.webServer>   <staticContent>             <clientCache cacheControlMode="UseMaxAge" cacheControlMaxAge="365.00:00:00" />   </staticContent> Compression - By default static compression is enabled on IIS 7.0 but the only thing which falls under that category is CSS but this is not enough for most of the websites using lots of javascript.  If you just thought by enabling dynamic compression would fix this then you are wrong so please follow following steps –   In some machines the dynamic compression is not enabled and following are the steps to enable it – Open server manager Roles > Web Server (IIS) Role Services (scroll down) > Add Role Services Add desired role (Web Server > Performance > Dynamic Content Compression) Next, Install, Wait…Done!   ?  Roles > Web Server (IIS) ?  Role Services (scroll down) > Add Role Services     Add desired role (Web Server > Performance > Dynamic Content Compression)     Next, Install, Wait…Done!     Enable  - ?  Open server manager ?  Roles > Web Server (IIS) > Internet Information Services (IIS) Manager   Next pane: Sites > Default Web Site > Your Web Site Main pane: IIS > Compression         Then comes the custom configuration for encrypting javascript resources. The problem is that the compression in IIS 7 completely works on the mime types and by default there is a mismatch in the mime types Go to following location C:\Windows\System32\inetsrv\config Open applicationHost.config The mimemap is as follows  <mimeMap fileExtension=".js" mimeType="application/javascript" />   So the section in the staticTypes should be changed          <add mimeType="application/javascript" enabled="true" />     Doing the web.config way –   We can add following section in the system.webserver section <system.webServer> <urlCompression doDynamicCompression="false"  doStaticCompression="true"/> More Information/References – ·         http://weblogs.asp.net/owscott/archive/2009/02/22/iis-7-compression-good-bad-how-much.aspx ·         http://www.west-wind.com/weblog/posts/98538.aspx  

  Read the article

• Using the “Settings.settings” functionalities in VB.NET can be tricky…

  - by Vincent Grondin

  Sometime you’re searching for something forever and when you find it, you realize it was right under your nose.  Maybe you were distracted by other things around… or maybe that thing right under your nose was so well hidden that it deserves a blog post…   That happened to me a few days ago while using the “Settings.settings” functionalities in my VB.NET application…  I thought it was a cool feature and I decided to use it…  So there I am adding new settings with “USER” scope and StringCollection as the data type, testing my application and everything works perfectly fine...  That was before I decided to modify the “Value” of one of my settings…  After changing the value of one of my settings, I start my application again and, to my surprise, my new values aren’t showing!  Hmmm… That’s odd…  My setting was a pretty long list of strings so I was rather angry at myself for not saving my work after I was done…  So I open up the Settings.setting in the designer and click the ellipsis symbol to enter my string collection again, but to my great pleasure (and disbelief) my strings are there!!!  Alright, you rock VB.NET!  You’ve just save me a bunch of typing time and I’m thinking it’s just a simple Visual Studio glitch…  I hit “Save” then “Save All” (just in case) and finally I rebuild everything and fire up my app once again.  Huh?  Where are my darn strings????????  Ok there’s a bug there…  I open up the app.config and my new strings are there!!!  Alright, let’s recap…  My new strings are in the app.config, they show correctly in the Settings.settings designer UI but they aren’t showing at runtime…  Hmmmm?  Let’s try something else…  Let’s start the application but outside Visual Studio this time… I fire up the exe and BAM!  My strings where there!  I “alt-tab” and hit “F5” and BOOM, no strings!  So it’s a bug in the Visual Studio environment… or could it be a FEATURE?  I must admit that I’m a little confused over what’s a bug and what’s a feature in Visual Studio… lol!   Finally I found out there’s a “cache” for your Visual Studio located here:  C:\Users\<your username>\AppData\Local\Microsoft\<your app name and a very weird temp ID>\<your app version>\user.config When using the “Settings.settings” with a setting of scope “user”, this file is out of sync with your app.config until you manually decide to update it… The button is right there… under your nose… at the top left corner of your screen in the settings designer…  See the big “Synchronize” button there?  Yep…  Now that’s user friendly isn’t it?  Oh, and wait until you see what it does when you click it…  It prompts you and basically says:  “Would you like your settings to start working inside Visual Studio now that you found out that I exist?” and of course the right answer is yes… or rather “OK”…  Unfortunately, you have to do this every time you edit a value… On the other hand, adding and removing settings seem to work flawlessly without having to click this magical button… go figure!  Oh and I almost forgot… this great “feature” is only available for VB.NET…  A project in C# using Settings.settings will work perfectly EVEN when editing values… Here’s a screenshot that shows this important button: Button Using other data types appears to work perfectly well…   Maybe it’s simply related to the StringCollection data type?  If you are a VB.NET programmer, you should pay attention to this when you plan on using the settings functionalities and your scope is “user” and your data type is StringCollection… Happy coding all!

  Read the article

• BizTalk host throttling &ndash; Singleton pattern and High database size

  - by S.E.R.

  Originally posted on: http://geekswithblogs.net/SERivas/archive/2013/06/30/biztalk-host-throttling-ndash-singleton-pattern-and-high-database-size.aspxI have worked for some days around the singleton pattern (for those unfamiliar with it, read this post by Victor Fehlberg) and have come across a few very interesting posts, among which one dealt with performance issues (here, also by Victor Fehlberg). Simply put: if you have an orchestration which implements the singleton pattern, then performances will continuously decrease as the orchestration receives and consumes messages, and that behavior is more obvious when the orchestration never ends (ie : it keeps looping and never terminates or completes). As I experienced the same kind of problem (actually I was alerted by SCOM, which told me that the host was being throttled because of High database size), I thought it would be a good idea to dig a little bit a see what happens deep inside BizTalk and thus understand the reasons for this behavior. NOTE: in this article, I will focus on this High database size throttling condition. I will try and work on the other conditions in some not too distant future… Test conditions The singleton orchestration For the purpose of this study, I have created the following orchestration, which is a very basic implementation of a singleton that piles up incoming messages, then does something else when a certain timeout has been reached without receiving another message: Throttling settings I have two distinct hosts : one that hosts the receive port (basic FILE port) : Ports_ReceiveHostone that hosts the orchestration : ProcessingHost In order to emphasize the throttling mechanism, I have modified the throttling settings for each of these hosts are as follows (all other parameters are set to the default value): [Throttling thresholds] Message count in database: 500 (default value : 50000) Evolution of performance counters when submitting messages Since we are investigating the High database size throttling condition, here are the performance counter that we should take a look at (all of them are in the BizTalk:Message Agent performance object): Database sizeHigh database sizeMessage delivery throttling stateMessage publishing throttling stateMessage delivery delay (ms)Message publishing delay (ms)Message delivery throttling state durationMessage publishing throttling state duration (If you are not used to Perfmon, I strongly recommend that you start using it right now: it is a wonderful tool that allows you to open the hood and see what is going on inside BizTalk – and other systems) Database size It is quite obvious that we will start by watching the database size and high database size counters, just to see when the first reaches the configured threshold (500) and when the second rings the alarm. NOTE : During this test I submitted 600 messages, one message at a time every 10ms to see the evolution of the counters we have previously selected. It might not show very well on this screenshot, but here is what happened: From 15:46:50 to 15:47:50, the database size for the Ports_ReceiveHost host (blue line) kept growing until it reached a maximum of 504.At 15:47:50, the high database size alert fires At first I was surprised by this result: why is it the database size of the receiving host that keeps growing since it is the processing host that piles up messages? Actually, it makes total sense. This counter measures the size of the database queue that is being filled by the host, not consumed. Therefore, the high database size alert is raised on the host that fills the queue: Ports_ReceiveHost. More information is available on the Public MPWiki page. Now, looking at the Message publishing throttling state for the receiving host (green line), we can see that a throttling condition has been reached at 15:47:50: We can also see that the Message publishing delay(ms) (blue line) has begun growing slowly from this point. All of this explains why performances keep decreasing when a singleton keeps processing new messages: the database size grows and when it has exceeded the Message count in database threshold, the host is throttled and the publishing delay keeps increasing. Digging further So, what happens to the database queue then? Is it flushed some day or does it keep growing and growing indefinitely? The real question being: will the host be throttled forever because of this singleton? To answer this question, I set the Message count in database threshold to 20 (this value is very low in order not to wait for too long, otherwise I certainly would have fallen asleep in front of my screen) and I submitted 30 messages. The test was started at 18:26. At 18:56 (ie : exactly 30min later) the throttling was stopped and the database size was divided by 2. 30 min later again, the database size had dropped to almost zero: I guess I’ll have to find some documentation and do some more testing before I sort this out! My guess is that some maintenance job is at work here, though I cannot tell which one Digging even further If we take a look at the Message delivery throttling state counter for the processing host, we can see that this host was also throttled during the submission of the 600 documents: The value for the counter was 1, meaning that Message delivery incoming rate for the host instance exceeds the Message delivery outgoing rate * the specified Rate overdrive factor (percent) value. We will see this another day… :) A last word Let’s end this article with a warning: DO NOT CHANGE THE THROTTLING SETTINGS LIGHTLY! The temptation can be great to just bypass throttling by setting very high values for each parameter (or zero in some cases, which simply disables throttling). Nevertheless, always keep in mind that this mechanism is here for a very good reason: prevent your BizTalk infrastructure from exploding!! So whatever you do with those settings, do a lot of testing and benchmarking!

  Read the article

• Windows Phone 7 development: first impressions

  - by DigiMortal

  After hard week in work I got some free time to play with Windows Phone 7 CTP developer tools. Although my first test application is still unfinished I think it is good moment to share my first experiences to you. In this posting I will give you quick overview of Windows Phone 7 developer tools from developer perspective. If you are familiar with Visual Studio 2010 then you will feel comfortable because Windows Phone 7 CTP developer tools base on Visual Studio 2010 Express. Project templates There are five project templates available. Three of them are based on Silverlight and two on XNA Game Studio: Windows Phone Application (Silverlight) Windows Phone List Application (Silverlight) Windows Phone Class Library (Silverlight) Windows Phone Game (XNA Game Studio) Windows Phone Game Library (XNA Game Studio) Currently I am writing to test applications. One of them is based on Windows Phone Application and the other on Windows Phone List Application project template. After creating these projects you see the following views in Visual Studio. Windows Phone Application. Click on image to enlarge. Windows Phone List Application. Click on image to enlarge.  I suggest you to use some of these templates to get started more easily. Windows Phone 7 emulator You can run your Windows Phone 7 applications on Windows Phone 7 emulator that comes with developer tools CTP. If you run your application then emulator is started automatically and you can try out how your application works in phone-like emulator. You can see screenshot of emulator on right. Currently there is opened Windows Phone List Application as it is created by default. Click on image to enlarge it. Emulator is a little bit slow and uncomfortable but it works pretty well. This far I have caused only couple of crashes during my experiments. In these cases emulator works but Visual Studio gets stuck because it cannot communicate with emulator. One important note. Emulator is based on virtual machine although you can see only phone screen and options toolbar. If you want to run emulator you must close all virtual machines running on your machine and run Visual Studio 2010 as administrator. Once you run emulator you can keep it open because you can stop your application in Visual Studio, modify, compile and re-deploy it without restarting emulator. Designing user interfaces You can design user interface of your application in Visual Studio. When you open XAML-files it is displayed in window with two panels. Left panel shows you device screen and works as visual design environment while right panel shows you XAML mark-up and let’s you modify XML if you need it. As it is one of my very first Silverlight applications I felt more comfortable with XAML editor because property names in property boxes of visual designer confused me a little bit. Designer panel is not very good because it is visually hard to follow. It has black background that makes dark borders of controls very hard to see. If you have monitor with very high contrast then it is may be not a real problem. I have usual monitor and I have problem. :) Putting controls on design surface, dragging and resizing them is also pretty painful. Some controls are drawn correctly but for some controls you have to set width and height in XML so they can be resized. After some practicing it is not so annoying anymore. On the right you can see toolbox with some controllers. This is all you get out of the box. But it is sufficient to get started. After getting some experiences you can create your own controls or use existing ones from other vendors or developers. If it is your first time to do stuff with Silverlight then keep Google open – you need it hard. After getting over the first shock you get the point very quickly and start developing at normal speed. :) Writing source code Writing source code is the most familiar part of this action. Good old Visual Studio code editor with all nice features it has. But here you get also some surprises: The anatomy of Silverlight controls is a little bit different than the one of user controls in web and forms projects. Windows Phone 7 doesn’t run on full version of Windows (I bet it is some version of Windows CE or something like this) then there is less system classes you can use. Some familiar classes have less methods that in full version of .NET Framework and in these cases you have to write all the code by yourself or find libraries or source code from somewhere. These problems are really not so much problems than limitations and you get easily over them. Conclusion Windows Phone 7 CTP developer tools help you do a lot of things on Windows Phone 7. Although I expected better performance from tools I think that current performance is not a problem. This far my first test project is going very well and Google has answer for almost every question. Windows Phone 7 is mobile device and therefore it has less hardware resources than desktop computers. This is why toolset is so limited. The more you need memory the more slower is device and as you may guess it needs the more battery. If you are writing apps for mobile devices then make your best to get your application use as few resources as possible and act as fast as possible.

  Read the article

• Silverlight 5 &ndash; What&rsquo;s New? (Including Screenshots &amp; Code Snippets)

  - by mbcrump

  Silverlight 5 is coming next year (2011) and this blog post will tell you what you need to know before the beta ships. First, let me address people saying that it is dead after PDC 2010. I believe that it’s best to see what the market is doing, not the vendor. Below is a list of companies that are developing Silverlight 4 applications shown during the Silverlight Firestarter. Some of the companies have shipped and some haven’t. It’s just great to see the actual company names that are working on Silverlight instead of “people are developing for Silverlight”. The next thing that I wanted to point out was that HTML5, WPF and Silverlight can co-exist. In case you missed Scott Gutherie’s keynote, they actually had a slide with all three stacked together. This shows Microsoft will be heavily investing in each technology.  Even I, a Silverlight developer, am reading Pro HTML5. Microsoft said that according to the Silverlight Feature Voting site, 21k votes were entered. Microsoft has implemented about 70% of these votes in Silverlight 5. That is an amazing number, and I am crossing my fingers that Microsoft bundles Silverlight with Windows 8. Let’s get started… what’s new in Silverlight 5? I am going to show you some great application and actual code shown during the Firestarter event. Media Hardware Video Decode – Instead of using CPU to decode, we will offload it to GPU. This will allow netbooks, etc to play videos. Trickplay – Variable Speed Playback – Pitch Correction (If you speed up someone talking they won’t sound like a chipmunk). Power Management – Less battery when playing video. Screensavers will no longer kick in if watching a video. If you pause a video then screensaver will kick in. Remote Control Support – This will allow users to control playback functions like Pause, Rewind and Fastforward. IIS Media Services 4 has shipped and now supports Azure. Data Binding Layout Transitions – Just with a few lines of XAML you can create a really rich experience that is not using Storyboards or animations. RelativeSource FindAncestor – Ancestor RelativeSource bindings make it much easier for a DataTemplate to bind to a property on a container control. Custom Markup Extensions – Markup extensions allow code to be run at XAML parse time for both properties and event handlers. This is great for MVVM support. Changing Styles during Runtime By Binding in Style Setters – Changing Styles at runtime used to be a real pain in Silverlight 4, now it’s much easier. Binding in style setters allows bindings to reference other properties. XAML Debugging – Below you can see that we set a breakpoint in XAML. This shows us exactly what is going on with our binding.  WCF & RIA Services WS-Trust Support – Taken from Wikipedia: WS-Trust is a WS-* specification and OASIS standard that provides extensions to WS-Security, specifically dealing with the issuing, renewing, and validating of security tokens, as well as with ways to establish, assess the presence of, and broker trust relationships between participants in a secure message exchange. You can reduce network latency by using a background thread for networking. Supports Azure now.  Text and Printing Improved text clarity that enables better text rendering. Multi-column text flow, Character tracking and leading support, and full OpenType font support.  Includes a new Postscript Vector Printing API that provides control over what you print . Pivot functionality baked into Silverlight 5 SDK. Graphics Immediate mode graphics support that will enable you to use the GPU and 3D graphics supports. Take a look at what was shown in the demos below. 1) 3D view of the Earth – not really a real-world application though. A doctor’s portal. This demo really stood out for me as it shows what we can do with the 3D / GPU support. Out of Browser OOB applications can now create and manage childwindows as shown in the screenshot below.  Trusted OOB applications can use P/Invoke to call Win32 APIs and unmanaged libraries.  Enterprise Group Policy Support allow enterprises to lock down or up the sandbox capabilities of Silverlight 5 applications. In this demo, he tore the “notes” off of the application and it appeared in a new window. See the black arrow below. In this demo, he connected a USB Device which fired off a local Win32 application that provided the data off the USB stick to Silverlight. Another demo of a Silverlight 5 application exporting data right into Excel running inside of browser. Testing They demoed Coded UI, which is available now in the Visual Studio Feature Pack 2. This will allow you to create automated testing without writing any code manually. Performance: Microsoft has worked to improve the Silverlight startup time. Silverlight 5 provides 64-bit browser support.  Silverlight 5 also provides IE9 Hardware acceleration.   I am looking forward to Silverlight 5 and I hope you are too. Thanks for reading and I hope you visit again soon.  Subscribe to my feed CodeProject

  Read the article

• SQL Developer Data Modeler v3.3 Early Adopter: Collaborative Design via Excel?

  - by thatjeffsmith

  As you may have heard last week, we have a new version of Oracle SQL Developer Data Modeler now available as an Early Adopter release. Version 3.3 has quite a few new features and I’ll be previewing them here. Today’s topic is our new Excel integration. It builds off of last week’s lesson: Search, so you may want to go read that first. They say it takes a village to raise a child. I say it takes a team to build a data model. You have your techie folks, your business folks, your in-betweeners, and your database geeks. Who gets to define how customers are represented and stored in your database? That data lives forever, so you better get it right from the beginning, or you’ll be living in a hacker’s paradise for years to come. Lots of good rantings, ravings, and advice on this topic in general on Karen Lopez’s (@datachick) blog. But let’s say you are the primary modeler on a project. You dutifully interview the business folks for their requirements. You sit down and start to model and think you’re pretty close. Now you need someone to confirm your assumptions and provide some feedback. Do you send your model over? Take a screenshot and blow it up on a whiteboard? Export to HTML and let them take a magic marker to their monitors? Or maybe you bite the bullet and install your modeling software on their desktops and take the hours or days required to train them up on how to use the the tool. Wouldn’t it be nice if they could just mark up their corrections in Excel and let you suck the updates back in? This is what we have started to build in Oracle SQL Developer Data Modeler. Let’s say you have a new table called ‘UT_STARTUPS.’ It looks a little something like this: A table in Oracle SQL Developer Data Modeler What I would like to do is have my team or co-worker review how I have defined those columns. Perhaps TIMESTAMP is overkill or maybe the column names themselves aren’t up to snuff. What I am going to do is now search for all the columns in my table, then export that to Excel. So do a search for UT_STARTUPS. Search, filter, then Report With the filter set to ‘Columns,’ if I do a report I’ll be only getting the columns that are resolving to my search term. So as long as my table name is unique in the model, I should get what I’m looking for. Here’s what I see when I click on the Report button: XLS or XLSX, either format is just fine I want to decide how the Column data is exported to Excel though, so I’m going to create a report template that I can use going forward. So click the ‘Manage’ button and setup a new template. I’m going to call mine ‘CollaborativeDevelopment.’ The templates allow me to define what properties are included in the reports. Once this is set, I’ll have the XLS file generated, and get to work Now let the Excel junkies do their stuff Note that not ALL of the report properties are update-able (yes, I made up a new word there) via Excel. We’ll have the full list of properties documented going forward, but in my Excel sheet, note that I can’t change the table name or the data types for the columns. I’m going to update some column names and supply ‘nice’ comments so the database users know what’s what. Here’s my input for the designer/architect/database dude: Be kind, please rew…use comments. Save the file, email it back to your modeler. Update the model from Excel That’s right, it’s a right mouse click from your model in the tree If everything goes right, you’ll see a nice confirmation message: It’s alive! Another to-do item on tap – making this dialog more informative. We’ll be showing exactly what in your model was updated from Excel. Let’s take another look at the model now Voila! Why are we doing this again? The goal is to reduce the number of round-trips from the modeler and the business process owner. One is used to working with Excel – why not allow them to mark up their changes in the tool they already know? This is an early adopter release and I anticipate this feature getting a good bit of tuning up before we release. Why don’t you download 3.3, give it a whirl, and let us know what you think?

  Read the article

• Weekend reading: Microsoft/Oracle and SkyDrive based code-editor

  - by jamiet

  A couple of news item caught my eye this weekend that I think are worthy of comment. Microsoft/Oracle partnership to be announced tomorrow (24/06/2013) According to many news site Microsoft and Oracle are about to announce a partnership (Oracle set for major Microsoft, Salesforce, Netsuite partnerships) and they all seem to be assuming that it will be something to do with “the cloud”. I wouldn’t disagree with that assessment, Microsoft are heavily pushing Azure and Oracle seem (to me anyway) to be rather lagging behind in the cloud game. More specifically folks seem to be assuming that Oracle’s forthcoming 12c database release will be offered on Azure. I did a bit of reading about Oracle 12c and one of its key pillars appears to be that it supports multi-tenant topologies and multi-tenancy is a common usage scenario for databases in the cloud. I’m left wondering then, if Microsoft are willing to push a rival’s multi-tenant solution what is happening to its own cloud-based multi-tenant offering – SQL Azure Federations. We haven’t heard anything about federations for what now seems to be a long time and moreover the main Program Manager behind the technology, Cihan Biyikoglu, recently left Microsoft to join Twitter. Furthermore, a Principle Architect for SQL Server, Conor Cunningham, recently presented the opening keynote at SQLBits 11 where he talked about multi-tenant solutions on SQL Azure and not once did he mention federations. All in all I don’t have a warm fuzzy feeling about the future of SQL Azure Federations so I hope that that question gets asked at some point following the Microsoft/Oracle announcement. Text Editor on SkyDrive with coding-specific features Liveside.net got a bit of a scoop this weekend with the news (Exclusive: SkyDrive.com to get web-based text file editing features) that Microsoft’s consumer-facing file storage service is going to get a new feature – a web-based code editor. Here’s Liveside’s screenshot: I’ve long had a passing interest in online code editors, indeed back in December 2009 I wondered out loud on this blog site: I started to wonder when the development tools that we use would also become cloud-based. After all, if we’re using cloud-based services does it not make sense to have cloud-based tools that work with them? I think it does. Project Houston Since then the world has moved on. Cloud 9 IDE (https://c9.io/) have blazed a trail in the fledgling world of online code editors and I have been wondering when Microsoft were going to start playing catch-up. I had no doubt that an online code editor was in Microsoft’s future; its an obvious future direction, why would I want to have to download and install a bloated text editor (which, arguably, is exactly what Visual Studio amounts to) and have to continually update it when I can simply open a web browser and have ready access to all of my code from wherever I am. There are signs that Microsoft is already making moves in this direction, after all the URL for their new offering Team Foundation Service doesn’t mention TFS at all – my own personalised URL for Team Foundation Service is http://jamiet.visualstudio.com – using “Visual Studio” as the domain name for a service that isn’t strictly speaking part of Visual Studio leads me to think that there’s a much bigger play here and that one day http://visualstudio.com will house an online code editor. With that in mind then I find Liveside’s revelation rather intriguing, why would a code editing tool show up in Skydrive? Perhaps SkyDrive is going to get integrated more tightly into TFS, I’m very interested to see where this goes. The larger question playing on my mind though is whether an online code editor from Microsoft will support SQL Server developers. I have opined before (see The SQL developer gap) about the shoddy treatment that SQL Server developers have to experience from Microsoft and I haven’t seen any change in Microsoft’s attitude in the three and a half years since I wrote that post. I’m constantly bewildered by the lack of investment in SQL Server developer productivity compared to the riches that are lavished upon our appdev brethren. When you consider that SQL Server is Microsoft’s third biggest revenue stream it is, frankly, rather insulting. SSDT was a step in the right direction but the hushed noises I hear coming out of Microsoft of late in regard to SSDT don’t bode fantastically well for its future. So, will an online code editor from Microsoft support T-SQL development? I have to assume not given the paucity of investment on us lowly SQL Server developers over the last few years, but I live in hope! Your thoughts in the comments section please. I would be very interested in reading them. @Jamiet

  Read the article

• Improve the Quality of ePub eBooks with Sigil

  - by Matthew Guay

  Would you like to correct errors in your ePub formatted eBooks, or even split them into chapters and create a Table of Contents?  Here’s how you can with the free program Sigil. eBooks are increasingly popular with the rise of eBook readers and reading apps on mobile devices.  We recently showed you how to convert a PDF eBook to ePub format, but as you may have noticed, sometimes the converted file had some glitches or odd formatting.  Additionally, many of the many free ePub books available online from sources like the Project Guttenberg do not include a table of contents.  Sigil is a free application for Windows, OS X, and Linux that lets you edit ePub files, so let’s look at how you can use it to improve your eBooks. Note: Sigil took several moments to open files in our tests, and froze momentarily when we maximized the window.  Sigil is currently pre-release software in active development, so we would expect the bugs to be worked out in future versions.  As usual, only install if you’re comfortable testing pre-release software. Getting Started Download Sigil (link below), making sure to select the correct version for your computer.  Run the installer, and select your preferred setup language when prompted. After a moment the installer will appear; setup as normal. Launch Sigil when it’s finished installing.  It opens with a default blank ePub file, so you could actually start writing an eBook from scratch right here. Edit Your ePub eBooks Now you’re ready to edit your ePub books.  Click Open and browse to the file you want to edit. Now you can double-click any of the HTML or XHTML files on the left sidebar and edit them just like you would in Word. Or you can choose to view it in Code View and edit the actual HTML directly. The sidebar also gives you access to the other parts of the ePub file, such as Images and CSS styles. If your ePub file has a Table of Contents, you can edit it with Sigil as well.  Click Tools in the menu bar, and then select TOC Editor.  Strangely there is no way to create a new table of contents, but you can remove entries from existing one.   Convert TXT Files to ePub Many free eBooks online, especially older, out of copyright titles, are available in plain text format.  One problem with these files is that they usually use hard returns at the end of lines, so they don’t reflow to fill your screen efficiently. Sigil can easily convert these files to the more useful ePub format.  Open the text file in Sigil, and it will automatically reflow the text and convert it ePub.  As you can see in the screenshot below, the text in the eBook does not have hard line-breaks at the end of each line, and will be much more readable on mobile devices. Note that Sigil may take several moments opening the book, and may even become unresponsive while analyzing it.   Now you can edit your eBook, split it into chapters, or just save it as is.  Either way, make sure to select Save as to save your book as ePub format. Conclusion As mentioned before, Sigil seems to run slow at times, especially when editing large eBooks.  But it’s still a nice solution to edit and extend your ePub eBooks, and even convert plain text eBooks to the nicer ePub format.  Now you can make your eBooks work just like you want, and read them on your favorite device! If you feel comfortable editing HTML files, check out our article on how to edit ePub eBooks with your favorite HTML editor. Link Download Sigil from Google Code Download free ePub eBooks from Project Guttenberg Similar Articles Productive Geek Tips Edit ePub eBooks with Your Favorite HTML EditorConvert a PDF eBook to ePub Format for Your iPad, iPhone, or eReaderRead Mobi eBooks on Kindle for PCFriday Fun: Watch HD Video Content with MeevidPreview and Purchase Ebooks with Kindle for PC TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Get Your Team’s World Cup Schedule In Google Calendar Backup Drivers With Driver Magician TubeSort: YouTube Playlist Organizer XPS file format & XPS Viewer Explained Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account

  Read the article

• NTFS Issues in Windows 7 and 2008 R2 - 'Is it a Bug?'

  - by renewieldraaijer

  I have been using the various versions of the Microsoft Windows product line since NT4 and I really thought I knew the ins and outs about the NTFS filesystem by now. There were always a few rules of thumb to understand what happens if you move data around. These rules were: "If you copy data, the copied data will inherit the permissions of the location it is being copied to. The same goes for moving data between disk partitions. Only when you move data within the same partition, the permissions are kept."  Recently I was asked to assist in troubleshooting some NTFS related issues. This forced me to have another good look at this theory. To my surprise I found out that this theory does not completely stand anymore. Apparently some things have changed since the release of Windows Vista / Windows 2008. Since the release of these Operating Systems, a move within the same disk partition results in the data inheriting the permissions of the location it is being copied into. A major change in the NTFS filesystem you would think!  Not quite! The above only counts when the move operation is being performed by using Windows Explorer. A move by using the 'move' command from within a cmd prompt for example, retains the NTFS permissions, just like before in Windows XP and older systems. Conclusion: The Windows Explorer is responsible for changing the ACL's of the moved data. This is a remarkable change, but if you follow this theory, the resulting ACL after a move operation is still predictable.  We could say that since Windows Vista and Windows 2008, a new rule set applies: "If you copy data, the copied data will inherit the permissions of the location it is being copied to. Same goes for moving data between disk partitions and within disk partitions. Only when you move data within the same partition by using something else than the Windows Explorer, the permissions are kept." The above behavior should be unchanged in Windows 7 / Windows 2008 R2, compared to Windows Vista / 2008. But somehow the NTFS permissions are not so predictable in Windows 7 and Windows 2008 R2. Moving data within the same disk partition the one time results in the permissions being kept and the next time results in inherited permissions from the destination location. I will try to demonstrate this in a few examples: Example 1 (Incorrect behavior): Consider two folders, 'Folder A' and 'Folder B' with the following permissions configured.                    Now we create the test file 'test file 1.txt' in 'Folder A' and afterwards move this file to 'Folder B' using Windows Explorer.                       According to the new theory, the file should inherit the permissions of 'Folder B' and therefore 'Group B' should appear in the ACL of 'test file 1.txt'. In the screenshot below the resulting permissions are displayed. The permissions from the originating location are kept, while the permissions of 'Folder B' should be inherited.                   Example 2 (Correct behavior): Again, consider the same two folders. This time we make a small modification to the ACL of 'Folder A'. We add 'Group C' to the ACL and again we create a file in 'Folder A' which we name 'test file 2.txt'.                    Next, we move 'test file 2.txt' to 'Folder B'.                       Again, we check the permissions of 'test file 2.txt' at the target location. We can now see that the permissions are inherited. This is what should be happening, and can be considered 'correct behavior' for Windows Vista / 2008 / 7 / 2008 R2. It remains uncertain why this behavior is so inconsistent. At this time, this is under investigation with Microsoft Support. The investigation has been going for the last two weeks and it is beginning to look like there is no rational reason for this, other than a bug in the Windows Explorer in Windows 7 and 2008 R2. As soon as there is any certainty on this, I will note it here in this blog.                   The examples above are harmless tests, by using my own laptop. If you would create the same set of folders and groups, and configure exactly the same permissions, you will see exactly the same behavior. Be sure to use Windows 7 or Windows 2008 R2.   Initially the problem arose at a customer site where move operations on data on the fileserver by users would result in unpredictable results. This resulted in the wrong set of people having àccess permissions on data that they should not have permissions to. Off course this is something we want to prevent at all costs.   I have also done several tests with move operations by using the move command in a cmd prompt. This way the behavior is always consistent. The inconsistent behavior is only exposed when using the Windows Explorer to initiate the move operation, and only when using Windows 7 or Windows 2008 R2 systems. It is evident that this behavior changes when the ACL of a folder has been changed, for example by adding an extra entry. The reason for this remains uncertain though. To be continued…. A dutch version of this post can be found at: http://blogs.platani.nl/?p=612

  Read the article

• F# for the C# Programmer

  - by mbcrump

  Are you a C# Programmer and can’t make it past a day without seeing or hearing someone mention F#?  Today, I’m going to walk you through your first F# application and give you a brief introduction to the language. Sit back this will only take about 20 minutes. Introduction Microsoft's F# programming language is a functional language for the .NET framework that was originally developed at Microsoft Research Cambridge by Don Syme. In October 2007, the senior vice president of the developer division at Microsoft announced that F# was being officially productized to become a fully supported .NET language and professional developers were hired to create a team of around ten people to build the product version. In September 2008, Microsoft released the first Community Technology Preview (CTP), an official beta release, of the F# distribution . In December 2008, Microsoft announced that the success of this CTP had encouraged them to escalate F# and it is now will now be shipped as one of the core languages in Visual Studio 2010 , alongside C++, C# 4.0 and VB. The F# programming language incorporates many state-of-the-art features from programming language research and ossifies them in an industrial strength implementation that promises to revolutionize interactive, parallel and concurrent programming. Advantages of F# F# is the world's first language to combine all of the following features: Type inference: types are inferred by the compiler and generic definitions are created automatically. Algebraic data types: a succinct way to represent trees. Pattern matching: a comprehensible and efficient way to dissect data structures. Active patterns: pattern matching over foreign data structures. Interactive sessions: as easy to use as Python and Mathematica. High performance JIT compilation to native code: as fast as C#. Rich data structures: lists and arrays built into the language with syntactic support. Functional programming: first-class functions and tail calls. Expressive static type system: finds bugs during compilation and provides machine-verified documentation. Sequence expressions: interrogate huge data sets efficiently. Asynchronous workflows: syntactic support for monadic style concurrent programming with cancellations. Industrial-strength IDE support: multithreaded debugging, and graphical throwback of inferred types and documentation. Commerce friendly design and a viable commercial market. Lets try a short program in C# then F# to understand the differences. Using C#: Create a variable and output the value to the console window: Sample Program. using System;   namespace ConsoleApplication9 {     class Program     {         static void Main(string[] args)         {             var a = 2;             Console.WriteLine(a);             Console.ReadLine();         }     } } A breeze right? 14 Lines of code. We could have condensed it a bit by removing the “using” statment and tossing the namespace. But this is the typical C# program. Using F#: Create a variable and output the value to the console window: To start, open Visual Studio 2010 or Visual Studio 2008. Note: If using VS2008, then please download the SDK first before getting started. If you are using VS2010 then you are already setup and ready to go. So, click File-> New Project –> Other Languages –> Visual F# –> Windows –> F# Application. You will get the screen below. Go ahead and enter a name and click OK. Now, you will notice that the Solution Explorer contains the following: Double click the Program.fs and enter the following information. Hit F5 and it should run successfully. Sample Program. open System let a = 2        Console.WriteLine a As Shown below: Hmm, what? F# did the same thing in 3 lines of code. Show me the interactive evaluation that I keep hearing about. The F# development environment for Visual Studio 2010 provides two different modes of execution for F# code: Batch compilation to a .NET executable or DLL. (This was accomplished above). Interactive evaluation. (Demo is below) The interactive session provides a > prompt, requires a double semicolon ;; identifier at the end of a code snippet to force evaluation, and returns the names (if any) and types of resulting definitions and values. To access the F# prompt, in VS2010 Goto View –> Other Window then F# Interactive. Once you have the interactive window type in the following expression: 2+3;; as shown in the screenshot below: I hope this guide helps you get started with the language, please check out the following books for further information. F# Books for further reading   Foundations of F# Author: Robert Pickering An introduction to functional programming with F#. Including many samples, this book walks through the features of the F# language and libraries, and covers many of the .NET Framework features which can be leveraged with F#.       Functional Programming for the Real World: With Examples in F# and C# Authors: Tomas Petricek and Jon Skeet An introduction to functional programming for existing C# developers written by Tomas Petricek and Jon Skeet. This book explains the core principles using both C# and F#, shows how to use functional ideas when designing .NET applications and presents practical examples such as design of domain specific language, development of multi-core applications and programming of reactive applications.

  Read the article

• Oracle Social Network Developer Challenge Winners

  - by kellsey.ruppel

  Originally posted by Jake Kuramoto on The Apps Lab blog. Now that OpenWorld 2012 has wrapped, I have time to tell you all about what happened. Maybe you recall that Noel (@noelportugal) and I were running a modified hackathon during the show, the Oracle Social Network Developer Challenge. Without further ado, congratulations to Dimitri Gielis (@dgielis) and Martin Giffy D’Souza (@martindsouza) on their winning entry, an integration between Oracle APEX and Oracle Social Network that integrates feedback and bug submission with Oracle Social Network Conversations, allowing developers, end-users and project leaders to view and discuss the feedback on their APEX applications from within Oracle Social Network. Update: Bob Rhubart of OTN (@brhubart) interviewed Dimitri and Martin right after their big win. Money quote from Dimitri when asked what he’d buy with the $500 in Amazon gift cards, “Oracle Social Network.” Nice one. In their own words: In the developers perspective it’s important to get feedback soon, so after a first iteration and end-users start to test, they can give feedback of the application. Previously it stopped there, and it was up to the developer to communicate further with email, phone etc. With OSN every feedback and communication gets logged and other people can see the discussion immediately as well. For the end users perspective he can now communicate in a more efficient way to not only the developers, but also between themselves. Maybe many end-users (in different locations) would like to change some behaviour, by using OSN they can see the entry somebody put in with a screenshot and they can just start to chat about it. Some key technical end users can have lighten the tasks of the development team by looking at the feedback first and start to communicate with their peers. For the project manager he has now the ability to really see what communication has taken place in certain areas and can make decisions on that. Later, if things come up again, he can always go back in OSN and see what was said at that moment in time. Integrating OSN in the APEX applications enhances the user experience, makes the lives of the developers easier and gives a better overview to project managers. Incidentally, you may already know Dimitri and Martin, since both are Oracle Ace Directors. I ran into Martin at the Ace Director briefings Friday before the conference started, and at that point, he wasn’t sure he’d have time to enter the Challenge. After some coaxing, he and Dimitri agreed to give it a go and banged out their entry on Tuesday night, or more accurately, very early Wednesday morning, the day of the Challenge judging. I think they said it took them about four hours of hardcore coding to get it done, very much like a traditional hackathon, which is essentially a code sprint from idea to finished product. Here are some screenshots of the workflow they built. #gallery-1 { margin: auto; } #gallery-1 .gallery-item { float: left; margin-top: 10px; text-align: center; width: 33%; } #gallery-1 img { border: 2px solid #cfcfcf; } #gallery-1 .gallery-caption { margin-left: 0; } I love this idea, i.e. closing the loop between web developers and users, a very common pain point, and so did our judges. Speaking of, special thanks to our panel of three judges: Reggie Bradford (@reggiebradford), serial entrepreneur, founder of Vitrue and SVP of Cloud Product Development at Oracle Robert Hipps (@roberthipps), VP of Development for Oracle Social Network and my former boss Roland Smart (@rsmartx), VP of Social Marketing and the brains behind the Oracle Social Developer Community Finally, thanks to everyone who made this possible, including: The three other teams from HarQen (@harqen), TEAM Informatics (@teaminformatics) and Fishbowl Solutions (@fishbowle20) featuring Friend of the ‘Lab John Sim (@jrsim_uix), who finished and presented entries. I’ll be posting the details of their work this week. The one guy who finished an entry, but couldn’t make the judging, Bex Huff (@bex). Bex rallied from a hospitalization due to an allergic reaction during the show; he’s fine, don’t worry. I’ll post details of his work next week, too. The 40-plus people who registered to compete in the Challenge. Noel for all his hard work, sample code, and flying monkey target, more on that to come. The Oracle Social Network development team for supporting this event. Everyone in legal and the beta program office for their help. And finally, the Oracle Technology Network (@oracletechnet) for hosting the event and providing countless hours of operational and moral support. Sorry if I’ve missed some people, since this was a huge team effort. This event was a big success, and we plan to do similar events in the future. Stay tuned to this channel for more. 

  Read the article

• Remote Debug Windows Azure Cloud Service

  - by Shaun

  Originally posted on: http://geekswithblogs.net/shaunxu/archive/2013/11/02/remote-debug-windows-azure-cloud-service.aspxOn the 22nd of October Microsoft Announced the new Windows Azure SDK 2.2. It introduced a lot of cool features but one of it shocked most, which is the remote debug support for Windows Azure Cloud Service (a.k.a. WACS).   Live Debug is Nightmare for Cloud Application When we are developing against public cloud, debug might be the most difficult task, especially after the application had been deployed. In order to minimize the debug effort, Microsoft provided local emulator for cloud service and storage once the Windows Azure platform was announced. By using local emulator developers could be able run their application on local machine with almost the same behavior as running on Windows Azure, and that could be debug easily and quickly. But when we deployed our application to Azure, we have to use log, diagnostic monitor to debug, which is very low efficient. Visual Studio 2012 introduced a new feature named "anonymous remote debug" which allows any workstation under any user could be able to attach the remote process. This is less secure comparing the authenticated remote debug but much easier and simpler to use. Now in Windows Azure SDK 2.2, we could be able to attach our application from our local machine to Windows Azure, and it's very easy.   How to Use Remote Debugger First, let's create a new Windows Azure Cloud Project in Visual Studio and selected ASP.NET Web Role. Then create an ASP.NET WebForm application. Then right click on the cloud project and select "publish". In the publish dialog we need to make sure the application will be built in debug mode, since .NET assembly cannot be debugged in release mode. I enabled Remote Desktop as I will log into the virtual machine later in this post. It's NOT necessary for remote debug. And selected "advanced settings" tab, make sure we checked "Enable Remote Debugger for all roles". In WACS, a cloud service could be able to have one or more roles and each role could be able to have one or more instances. The remote debugger will be enabled for all roles and all instances if we checked. Currently there's no way for us to specify which role(s) and which instance(s) to enable. Finally click "publish" button. In the windows azure activity window in Visual Studio we can find some information about remote debugger. To attache remote process would be easy. Open the "server explorer" window in Visual Studio and expand "cloud services" node, find the cloud service, role and instance we had just published and wanted to debug, right click on the instance and select "attach debugger". Then after a while (it's based on how fast our Internet connect to Windows Azure Data Center) the Visual Studio will be switched to debug mode. Let's add a breakpoint in the default web page's form load function and refresh the page in browser to see what's happen. We can see that the our application was stopped at the breakpoint. The call stack, watch features are all available to use. Now let's hit F5 to continue the step, then back to the browser we will find the page was rendered successfully.   What Under the Hood Remote debugger is a WACS plugin. When we checked the "enable remote debugger" in the publish dialog, Visual Studio will add two cloud configuration settings in the CSCFG file. Since they were appended when deployment, we cannot find in our project's CSCFG file. But if we opened the publish package we could find as below. At the same time, Visual Studio will generate a certificate and included into the package for remote debugger. If we went to the azure management portal we will find there will a certificate under our application which was created, uploaded by remote debugger plugin. Since I enabled Remote Desktop there will be two certificates in the screenshot below. The other one is for remote debugger. When our application was deployed, windows azure system will open related ports for remote debugger. As below you can see there are two new ports opened on my application. Finally, in our WACS virtual machine, windows azure system will copy the remote debug component based on which version of Visual Studio we are using and start. Our application then can be debugged remotely through the visual studio remote debugger. Below is the task manager on the virtual machine of my WACS application.   Summary In this post I demonstrated one of the feature introduced in Windows Azure SDK 2.2, which is Remote Debugger. It allows us to attach our application from local machine to windows azure virtual machine once it had been deployed. Remote debugger is powerful and easy to use, but it brings more security risk. And since it's only available for debug build this means the performance will be worse than release build. Hence we should only use this feature for staging test and bug fix (publish our beta version to azure staging slot), rather than for production.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• How to setup SyntaxHighlighter with GeeksWithBlogs in about 10 minutes.

  - by mbcrump

  SyntaxHighlighter is a fully functional self-contained code syntax highlighter developed in JavaScript. Below is a sample of what it looks like in your blog. class Test { static void Main() { System.Console.WriteLine("Sample SyntaxHighlighter"); } } This tutorial will help you setup SyntaxHighlighter with GeeksWithBlogs.net in about 10 minutes. Even though this guide is specifically for GWB, you can use it on any other hosting provider that does not allow you to upload custom CSS/JavaScript. It is recommended that if you are using LiveWriter to go ahead and download Code Snippet with SyntaxHighlighter Support to integrate this functionality within Live Writer. 1) Log into GWB and select Options->Configure Now under the Custom CSS insert the following code at the top of the textbox: @import url("http://alexgorbatchev.com/pub/sh/current/styles/shCore.css"); @import url("http://alexgorbatchev.com/pub/sh/current/styles/shThemeDefault.css"); Please note that you can change the default theme by changing the shThemeDefault.css to one listed below: shThemeDefault.css shThemeDjango.css shThemeEmacs.css shThemeFadeToGrey.css shThemeMidnight.css shThemeRDark.css 2) Under the Static News/Announcements insert the following code at the top: <script type="text/javascript" src="http://alexgorbatchev.com/pub/sh/current/scripts/shCore.js"></script> <script type="text/javascript" language="javascript" src="http://alexgorbatchev.com/pub/sh/current/scripts/shBrushCSharp.js"></script> <script type="text/javascript" language="javascript" src="http://alexgorbatchev.com/pub/sh/current/scripts/shBrushJScript.js"></script> <script src='http://alexgorbatchev.com/pub/sh/current/scripts/shBrushJava.js' type='text/javascript'></script> <script language='javascript'> SyntaxHighlighter.config.bloggerMode = true; SyntaxHighlighter.config.clipboardSwf = 'http://alexgorbatchev.com/pub/sh/current/scripts/clipboard.swf'; SyntaxHighlighter.all(); </script> Please note that this will only give you support for Java, JavaScript and C Sharp. If you want more languages like Ruby and SQL. Then add the proper tags listed below. The reason that I didn’t add them is because I do not want to load languages that I will not be blogging about. <link href='http://alexgorbatchev.com/pub/sh/current/styles/shCore.css' rel='stylesheet' type='text/css'/> <link href='http://alexgorbatchev.com/pub/sh/current/styles/shThemeDefault.css' rel='stylesheet' type='text/css'/> <script src='http://alexgorbatchev.com/pub/sh/current/scripts/shCore.js' type='text/javascript'></script> <script src='http://alexgorbatchev.com/pub/sh/current/scripts/shBrushCpp.js' type='text/javascript'></script> <script src='http://alexgorbatchev.com/pub/sh/current/scripts/shBrushCSharp.js' type='text/javascript'></script> <script src='http://alexgorbatchev.com/pub/sh/current/scripts/shBrushCss.js' type='text/javascript'></script> <script src='http://alexgorbatchev.com/pub/sh/current/scripts/shBrushJava.js' type='text/javascript'></script> <script src='http://alexgorbatchev.com/pub/sh/current/scripts/shBrushJScript.js' type='text/javascript'></script> <script src='http://alexgorbatchev.com/pub/sh/current/scripts/shBrushPhp.js' type='text/javascript'></script> <script src='http://alexgorbatchev.com/pub/sh/current/scripts/shBrushPython.js' type='text/javascript'></script> <script src='http://alexgorbatchev.com/pub/sh/current/scripts/shBrushRuby.js' type='text/javascript'></script> <script src='http://alexgorbatchev.com/pub/sh/current/scripts/shBrushSql.js' type='text/javascript'></script> <script src='http://alexgorbatchev.com/pub/sh/current/scripts/shBrushVb.js' type='text/javascript'></script> <script src='http://alexgorbatchev.com/pub/sh/current/scripts/shBrushXml.js' type='text/javascript'></script> <script src='http://alexgorbatchev.com/pub/sh/current/scripts/shBrushPerl.js' type='text/javascript'></script> <script language='javascript'> SyntaxHighlighter.config.bloggerMode = true; SyntaxHighlighter.config.clipboardSwf = 'http://alexgorbatchev.com/pub/sh/current/scripts/clipboard.swf'; SyntaxHighlighter.all(); </script> 3) Now install Code Snippet with SyntaxHighlighter Support and launch Windows Live Writer. Click on the PreCode Snippet plugin add copy/paste your code into the windows. Make sure you select “PRE” and the Language that you are using. It should look similar to the following screenshot.  After you finish editing the post, hit publish and your code should look nice and neat like the example shown earlier.

  Read the article

• Do you know your ADF "grace period?"

  - by Chris Muir

  What does the term "support" mean to you in context of vendors such as Oracle giving your organization support with our products? Over the last few weeks I'm taken a straw poll to discuss this very question with customers, and I've received a wide array of answers much to my surprise (which I've paraphrased): "Support means my staff can access dedicated resources to assist them solve problems" "Support means I can call Oracle at anytime to request assistance" "Support means we can expect fixes and patches to bugs in Oracle software" The last expectation is the one I'd like to focus on in this post, keep it in mind while reading this blog. From Oracle's perspective as we're in the business of support, we in fact offer numerous services which are captured on the table in the following page. As the text under the table indicates, you should consult the relevant Oracle Lifetime Support brochures to understand the length of time Oracle will support Oracle products. As I'm a product manager for ADF that sits under the FMW tree of Oracle products, let's consider ADF in particular. The FMW brochure is found here. On page 8 and 9 you'll see the current "Application Development Framework 11gR1 (11.1.1.x)" and "Application Development Framework 11gR2 (11.1.2)" releases are supported out to 2017 for Extended Support. This timeframe is pretty standard for Oracle's current released products, though as new releases roll in we should see those dates extended. On page 8 of the PDF note the comment at the end of this page that refers to the Oracle Support document 209768.1: For more-detailed information on bug fix and patch release policies, please refer to the “Error Correction Support Policy” on MyOracle Support. This policy document is important as it introduces Oracle's Error Correction Support Policy which addresses "patches and fixes". You can find it attached the previous Oracle Support document 209768.1. Broadly speaking while Oracle does provide "generalized support" up to 2017 for ADF, the Error Correction Support Policy dictates when Oracle will provide "patches and fixes" for Oracle software, and this is where the concept of the "grace period" comes in. As Oracle releases different versions of Oracle software, say 11.1.1.4.0, you are fully supported for patches and fixes for that specific version. However when we release the next version, say 11.1.1.5.0, Oracle provides at minimum of 3 months to a maximum of 1 year "grace period" where we'll continue to provide patches and fixes for the previous version. This gives you time to move from 11.1.1.4.0 to 11.1.1.5.0 without being unsupported for patches and fixes. The last paragraph does generalize as I've attempted to highlight the concept of the grace period rather than the specific dates for any version. For specific ADF and FMW versions and their respective grace periods and when they terminated you must visit Oracle Support Note 1290894.1. I'd like to include a screenshot here of the relevant table from that Oracle Support Note but as it is will be frequently updated it's better I force you to visit that note. Be careful to heed the comment in the note: According to policy, the Grace Period has passed because a newer Patch Set has been released for more than a year. Its important to note that the Lifetime Support Policy and Error Correction Support Policy documents are the single source of truth, subject to change, and will provide exceptions when required. This My Oracle Support document is providing a summary of the Grace Period dates and time lines for planning purposes. So remember to return to the policy document for all definitions, note 1290894.1 is a summary only and not guaranteed to be up to date or correct. A last point from Oracle's perspective. Why doesn't Oracle provide patches and fixes for all releases as long as they're supported? Amongst other reasons, it's a matter of practicality. Consider JDeveloper 10.1.3 released in 2005. JDeveloper 10.1.3 is still currently supported to 2017, but since that version was released there has been just under 20 newer releases of JDeveloper. Now multiply that across all Oracle's products and imagine the number of releases Oracle would have to provide fixes and patches for, and maintain environments to test them, build them, staff to write them and more, it's simple beyond the capabilities of even a large software vendor like Oracle. So the "grace period" restricts that patches and fixes window to something manageable. In conclusion does the concept of the "grace period" matter to you? If you define support as "getting assistance from Oracle" then maybe not. But if patches and fixes are important to you, then you need to understand the "grace period" and operate within the bounds of Oracle's Error Correction Support Policy. Disclaimer: this blog post was written July 2012. Oracle Support policies do change from time to time so the emphasis is on you to double check the facts presented in this blog.

  Read the article

• Row Count Plus Transformation

  As the name suggests we have taken the current Row Count Transform that is provided by Microsoft in the Integration Services toolbox and we have recreated the functionality and extended upon it. There are two things about the current version that we thought could do with cleaning up Lack of a custom UI You have to type the variable name yourself In the Row Count Plus Transformation we solve these issues for you. Another thing we thought was missing is the ability to calculate the time taken between components in the pipeline. An example usage would be that you want to know how many rows flowed between Component A and Component B and how long it took. Again we have solved this issue. Credit must go to Erik Veerman of Solid Quality Learning for the idea behind noting the duration. We were looking at one of his packages and saw that he was doing something very similar but he was using a Script Component as a transformation. Our philosophy is that if you have to write or Copy and Paste the same piece of code more than once then you should be thinking about a custom component and here it is. The Row Count Plus Transformation populates variables with the values returned from; Counting the rows that have flowed through the path Returning the time in seconds between when it first saw a row come down this path and when it saw the final row. It is possible to leave both these boxes blank and the component will still work.   All input columns are passed through the transformation unaltered, you are not permitted to change or add to the inputs or outputs of this component. Optionally you can set the component to fire an event, which happens during the PostExecute phase of the execution. This can be useful to improve visibility of this information, such that it is captured in package logging, or can be used to drive workflow in the case of an error event. Properties Property Data Type Description OutputRowCountVariable String The name of the variable into which the amount of row read will be passed (Optional). OutputDurationVariable String The name of the variable into which the duration in seconds will be passed. (Optional). EventType RowCountPlusTransform.EventType The type of event to fire during post execute, included in which are the row count and duration values. RowCountPlusTransform.EventType Enumeration Name Value Description None 0 Do not fire any event. Information 1 Fire an Information event. Warning 2 Fire a Warning event. Error 3 Fire an Error event. Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. For 2005/2008 Only - Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Row Count Plus Transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations, and this component requires a minimum of SQL Server 2005 Service Pack 1. Downloads The Row Number Transformation is available for SQL Server 2005, SQL Server 2008 (includes R2) and SQL Server 2012. Please choose the version to match your SQL Server version, or you can install multiple versions and use them side by side if you have more than one version of SQL Server installed. Row Count Plus Transformation for SQL Server 2005 Row Count Plus Transformation for SQL Server 2008 Row Count Plus Transformation for SQL Server 2012 Version History SQL Server 2012 Version 3.0.0.6 - SQL Server 2012 release. Includes upgrade support for both 2005 and 2008 packages to 2012. (5 Jun 2012) SQL Server 2008 Version 2.0.0.5 - SQL Server 2008 release. (15 Oct 2008) SQL Server 2005 Version 1.1.0.43 - Bug fix for duration. For long running processes the duration second count may have been incorrect. (8 Sep 2006) Version 1.1.0.42 - SP1 Compatibility Testing. Added the ability to raise an event with the count and duration data for easier logging or workflow. (18 Jun 2006) Version 1.0.0.1 - SQL Server 2005 RTM. Made available as general public release. (20 Mar 2006) Screenshot Troubleshooting Make sure you have downloaded the version that matches your version of SQL Server. We offer separate downloads for SQL Server 2005, SQL Server 2008 and SQL Server 2012. If you get an error when you try and use the component along the lines of The component could not be added to the Data Flow task. Please verify that this component is properly installed.  ... The data flow object "Konesans ..." is not installed correctly on this computer, this usually indicates that the internal cache of SSIS components needs to be updated. This is held by the SSIS service, so you need restart the the SQL Server Integration Services service. You can do this from the Services applet in Control Panel or Administrative Tools in Windows. You can also restart the computer if you prefer. You may also need to restart any current instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Once installation is complete you need to manually add the task to the toolbox before you will see it and to be able add it to packages - How do I install a task or transform component?

  Read the article

• Unable to fix broken packages with sudo apt-get install -f

  - by Bob

  Here's my result, of sudo apt-get install -f. i have Ran it twice and got negative result. I believe there is an error at "error in Version string '0:3.6.1-dates for language English Translation data updates for all supported packages for: English" This same statement "error in Version string, caused me three days of attempting to download version 12.04. There is a bug report concerning the quoted text as well. Is there anyway to download the version without the language packs, why would I corrupt version 11.10? Also, when attempting to download Synaptic using sudo apt-get install synaptic, I get the same error message. Again I point out the initial download problems and the same error message receipt. Thanks b0b@b0b-IC780M-A:~$ sudo apt-get install -f [sudo] password for b0b: Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 298 not upgraded. b0b@b0b-IC780M-A:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 298 not upgraded. b0b@b0b-IC780M-A:~$ sudo apt-get upgrade install Reading package lists... Done Building dependency tree Reading state information... Done The following packages have been kept back: linux-headers-generic software-center The following packages will be upgraded: accountsservice acpi-support acpid aisleriot alsa-utils app-install-data-partner appmenu-qt apport apport-gtk apt-transport-https apt-utils aptdaemon aptdaemon-data apturl apturl-common banshee banshee-extension-soundmenu banshee-extension-ubuntuonemusicstore baobab bind9-host binutils bluez-alsa bluez-cups bluez-gstreamer brasero brasero-cdrkit brasero-common checkbox checkbox-gtk command-not-found command-not-found-data compiz compiz-core compiz-gnome compiz-plugins-default compiz-plugins-main-default cups cups-bsd cups-client cups-common cups-ppdc deja-dup desktop-file-utils dnsutils empathy empathy-common eog evince evince-common evolution-data-server evolution-data-server-common file-roller firefox firefox-globalmenu firefox-gnome-support gbrainy gcalctool gconf2 gconf2-common gedit gedit-common ghostscript ghostscript-cups ghostscript-x gir1.2-atspi-2.0 gir1.2-gconf-2.0 gir1.2-gnomebluetooth-1.0 gir1.2-gtk-3.0 gir1.2-gtksource-3.0 gir1.2-totem-1.0 gir1.2-unity-4.0 gir1.2-webkit-3.0 gnome-accessibility-themes gnome-bluetooth gnome-control-center gnome-control-center-data gnome-desktop3-data gnome-font-viewer gnome-games-common gnome-icon-theme gnome-mahjongg gnome-online-accounts gnome-orca gnome-power-manager gnome-screenshot gnome-search-tool gnome-session gnome-session-bin gnome-session-canberra gnome-session-common gnome-settings-daemon gnome-sudoku gnome-system-log gnome-system-monitor gnome-utils-common gnomine gstreamer0.10-gconf gstreamer0.10-plugins-good gstreamer0.10-pulseaudio gvfs gvfs-backends gvfs-bin gvfs-fuse gwibber gwibber-service gwibber-service-facebook gwibber-service-identica gwibber-service-twitter hpijs hplip hplip-cups hplip-data indicator-datetime indicator-session indicator-sound isc-dhcp-client isc-dhcp-common jockey-common jockey-gtk language-selector-common language-selector-gnome libaccountsservice0 libapt-inst1.3 libarchive1 libasound2-plugins libatk-adaptor libbind9-60 libbrasero-media3-1 libcamel-1.2-29 libcanberra-gtk-module libcanberra-gtk0 libcanberra-gtk3-0 libcanberra-gtk3-module libcanberra-pulse libcanberra0 libdecoration0 libdns69 libebackend-1.2-1 libebook1.2-12 libecal1.2-10 libedata-book-1.2-11 libedata-cal-1.2-13 libedataserver1.2-15 libedataserverui-3.0-1 libevince3-3 libgconf2-4 libgnome-bluetooth8 libgnome-control-center1 libgnome-desktop-3-2 libgoa-1.0-0 libgrip0 libgs9 libgs9-common libgtk-3-bin libgtksourceview-3.0-0 libgtksourceview-3.0-common libgweather-3-0 libgweather-common libgwibber-gtk2 libgwibber2 libhpmud0 libimobiledevice2 libisc62 libisccc60 libisccfg62 libjasper1 liblightdm-gobject-1-0 liblwres60 libmetacity-private0 libmission-control-plugins0 libmono-zeroconf1.0-cil libnautilus-extension1 libnm-glib-vpn1 libnm-glib4 libnm-util2 libnotify0.4-cil libnux-1.0-0 libnux-1.0-common libpam-gnome-keyring libreoffice-emailmerge libreoffice-style-human libsane-hpaio libsmbclient libsnmp-base libsnmp15 libsyncdaemon-1.0-1 libt1-5 libtotem0 libubuntuone-1.0-1 libubuntuone1.0-cil libunity-2d-private0 libunity-core-4.0-4 libunity6 libusbmuxd1 libwbclient0 libwebkitgtk-1.0-0 libwebkitgtk-1.0-common libwebkitgtk-3.0-0 libwebkitgtk-3.0-common libxml2 linux-generic linux-image-generic metacity metacity-common mobile-broadband-provider-info modemmanager mousetweaks multiarch-support nautilus nautilus-data nautilus-sendto-empathy network-manager nux-tools onboard openssl pulseaudio pulseaudio-esound-compat pulseaudio-module-bluetooth pulseaudio-module-gconf pulseaudio-module-x11 pulseaudio-utils python-apport python-aptdaemon python-aptdaemon-gtk python-aptdaemon.gtk3widgets python-aptdaemon.gtkwidgets python-brlapi python-cups python-cupshelpers python-gobject-cairo python-httplib2 python-launchpadlib python-libxml2 python-pam python-papyon python-pkg-resources python-problem-report python-pyatspi2 python-software-properties python-ubuntuone-client python-ubuntuone-storageprotocol samba-common samba-common-bin seahorse shotwell simple-scan smbclient sni-qt software-properties-common software-properties-gtk sudo system-config-printer-common system-config-printer-gnome system-config-printer-udev telepathy-indicator telepathy-mission-control-5 thunderbird thunderbird-globalmenu thunderbird-gnome-support tomboy totem totem-common totem-mozilla totem-plugins ttf-opensymbol ubuntu-desktop ubuntu-minimal ubuntu-standard ubuntuone-client ubuntuone-client-gnome ubuntuone-couch unity unity-2d unity-2d-launcher unity-2d-panel unity-2d-places unity-2d-spread unity-common unity-lens-applications unity-services update-manager update-manager-core update-notifier update-notifier-common usbmuxd vim-common vim-tiny vinagre vino xorg xserver-xorg xserver-xorg-input-all xserver-xorg-video-all xserver-xorg-video-intel xserver-xorg-video-openchrome xul-ext-ubufox 296 upgraded, 0 newly installed, 0 to remove and 2 not upgraded. Need to get 0 B/159 MB of archives. After this operation, 10.1 MB of additional disk space will be used. Do you want to continue [Y/n]? y Extracting templates from packages: 100% Preconfiguring packages ... dpkg: error: parsing file '/var/lib/dpkg/available' near line 4131 package 'python-zope.interface': error in Version string '0:3.6.1-dates for language English Translation data updates for all supported packages for: English . language-pack-en-base provides the bulk of translation data and is updated only seldom. This package provides frequent translation updates.': version string has embedded spaces E: Sub-process /usr/bin/dpkg returned an error code (2) b0b@b0b-IC780M-A:~$

  Read the article

• Checksum Transformation

  The Checksum Transformation computes a hash value, the checksum, across one or more columns, returning the result in the Checksum output column. The transformation provides functionality similar to the T-SQL CHECKSUM function, but is encapsulated within SQL Server Integration Services, for use within the pipeline without code or a SQL Server connection. As featured in The Microsoft Data Warehouse Toolkit by Joy Mundy and Warren Thornthwaite from the Kimbal Group. Have a look at the book samples especially Sample package for custom SCD handling. All input columns are passed through the transformation unaltered, those selected are used to generate the checksum which is passed out through a single output column, Checksum. This does not restrict the number of columns available downstream from the transformation, as columns will always flow through a transformation. The Checksum output column is in addition to all existing columns within the pipeline buffer. The Checksum Transformation uses an algorithm based on the .Net framework GetHashCode method, it is not consistent with the T-SQL CHECKSUM() or BINARY_CHECKSUM() functions. The transformation does not support the following Integration Services data types, DT_NTEXT, DT_IMAGE and DT_BYTES. ChecksumAlgorithm Property There ChecksumAlgorithm property is defined with an enumeration. It was first added in v1.3.0, when the FrameworkChecksum was added. All previous algorithms are still supported for backward compatibility as ChecksumAlgorithm.Original (0). Original - Orginal checksum function, with known issues around column separators and null columns. This was deprecated in the first SQL Server 2005 RTM release. FrameworkChecksum - The hash function is based on the .NET Framework GetHash method for object types. This is based on the .NET Object.GetHashCode() method, which unfortunately differs between x86 and x64 systems. For that reason we now default to the CRC32 option. CRC32 - Using a standard 32-bit cyclic redundancy check (CRC), this provides a more open implementation. The component is provided as an MSI file, however to complete the installation, you will have to add the transformation to the Visual Studio toolbox by hand. This process has been described in detail in the related FAQ entry for How do I install a task or transform component?, just select Checksum from the SSIS Data Flow Items list in the Choose Toolbox Items window. Downloads The Checksum Transformation is available for SQL Server 2005, SQL Server 2008 (includes R2) and SQL Server 2012. Please choose the version to match your SQL Server version, or you can install multiple versions and use them side by side if you have more than one version of SQL Server installed. Checksum Transformation for SQL Server 2005 Checksum Transformation for SQL Server 2008 Checksum Transformation for SQL Server 2012 Version History SQL Server 2012 Version 3.0.0.27 – SQL Server 2012 release. Includes upgrade support for both 2005 and 2008 packages to 2012. (5 Jun 2010) SQL Server 2008 Version 2.0.0.27 – Fix for CRC-32 algorithm that inadvertently made it sort dependent. Fix for race condition which sometimes lead to the error Item has already been added. Key in dictionary: '79764919' . Fix for upgrade mappings between 2005 and 2008. (19 Oct 2010) Version 2.0.0.24 - SQL Server 2008 release. Introduces the new CRC-32 algorithm, which is consistent across x86 and x64.. The default algorithm is now CRC32. (29 Oct 2008) Version 2.0.0.6 - SQL Server 2008 pre-release. This version was released by mistake as part of the site migration, and had known issues. (20 Oct 2008) SQL Server 2005 Version 1.5.0.43 – Fix for CRC-32 algorithm that inadvertently made it sort dependent. Fix for race condition which sometimes lead to the error Item has already been added. Key in dictionary: '79764919' . (19 Oct 2010) Version 1.5.0.16 - Introduces the new CRC-32 algorithm, which is consistent across x86 and x64. The default algorithm is now CRC32. (20 Oct 2008) Version 1.4.0.0 - Installer refresh only. (22 Dec 2007) Version 1.4.0.0 - Refresh for minor UI enhancements. (5 Mar 2006) Version 1.3.0.0 - SQL Server 2005 RTM. The checksum algorithm has changed to improve cardinality when calculating multiple column checksums. The original algorithm is still available for backward compatibility. Fixed custom UI bug with Output column name not persisting. (10 Nov 2005) Version 1.2.0.1 - SQL Server 2005 IDW 15 June CTP. A user interface is provided, as well as the ability to change the checksum output column name. (29 Aug 2005) Version 1.0.0 - Public Release (Beta). (30 Oct 2004) Screenshot

  Read the article

• Use your own domain email and tired of SPAM? SPAMfighter FTW

  - by Dave Campbell

  I wouldn't post this if I hadn't tried it... and I paid for it myself, so don't anybody be thinking I'm reviewing something someone sent me! Long ago and far away I got very tired of local ISPs and 2nd phone lines and took the plunge and got hooked up to cable... yeah I know the 2nd phone line concept may be hard for everyone to understand, but that's how it was in 'the old days'. To avoid having to change email addresses all the time, I decided to buy a domain name, get minimal hosting, and use that for all email into the house. That way if I changed providers, all the email addresses wouldn't have to change. Of course, about a dozen domains later, I have LOTS of pop email addresses and even an exchange address to my client's server... times have changed. What also has changed is the fact that we get SPAM... 'back in the day' when I was a beta tester for the first ISP in Phoenix, someone tried sending an ad to all of us, and what he got in return for his trouble was a bunch of core dumps that locked up his email... if you don't know what a core dump is, ask your grandfather. But in today's world, we're all much more civilized than that, and as with many things, the criminals seem to have much more rights than we do, so we get inundated with email offering all sorts of wild schemes that you'd have to be brain-dead to accept, but yet... if people weren't accepting them, they'd stop sending them. I keep hoping that survival of the smartest would weed out the mental midgets that respond and then the jumk email stop, but that hasn't happened yet anymore than finding high-quality hearing aids at the checkout line of Safeway because of all the dimwits playing music too loud inside their car... but that's another whole topic and I digress. So what's the solution for all the spam? And I mean *all*... on that old personal email address, I am now getting over 150 spam messages a day! Yes I know that's why God invented the delete key, but I took it on as a challenge, and it's a matter of principle... why should I switch email addresses, or convert from [email protected] to something else, or have all my email filtered through some service just because some A-Hole somewhere has a site up trying to phish Ma & Pa Kettle (ask your grandfather about that too) out of their retirement money? Well... I got an email from my cousin the other day while I was writing yet another email rule, and there was a banner on the bottom of his email that said he was protected by SPAMfighter. SPAMfighter huh.... so I took a look at their site, and found yet one more of the supposed tools to help us. But... I read that they're a Microsoft Gold Partner... and that doesn't come lightly... so I took a gamble and here's what I found: I installed it, and had to do a couple things: 1) SPAMfighter stuffed the SPAMfighter folder into my client's exchange address... I deleted it, made a new SPAMfighter folder where I wanted it to go, then in the SPAMfighter Clients settings for Outlook, I told it to put all spam there. 2) It didn't seem to be doing anything. There's a ribbon button that you can select "Block", and I did that, wondering if I was 'training' it, but it wasn't picking up duplicates 3) I sent email to support, and wrote a post on the forum (not to self: reply to that post). By the time the folks from the home office responded, it was the next day, and first up, SPAMfighter knocked down everything that came through when Outlook opend... two thumbs up! I disabled my 'garbage collection' rule from Outlook, and told Outlook not to use the junk folder thinking it was interfering. 4) Day 2 seemed to go about like Day 1... but I hung in there. 5) Day 3 is now a whole new day... I had left Outlook open and hadn't looked at the PC since sometime late yesterday afternoon, and when I looked this morning, *every bit* of spam was in the SPAMfighter folder!! I'm a new paying customer After watching SPAMfighter work this morning, I've purchased a 1-year license, and I now can sit and watch as emails come in and disappear from my inbox into the SPAMfighter folder. No more continual tweaking of the rules. I've got SPAMfighter set to 'Very Hard' filtering... personally I'd rather pull the few real emails out of the SPAMfighter folder than pull spam out of the real folders. Yes this is simply another way of using the delete key, but you know what? ... it feels good :) Here's a screenshot of the stats after just about 48 hours of being onboard: Note that all the ones blocked by me were during Day 1 and 2... I've blocked none today, and everything is blocked. Stay in the 'Light!

  Read the article

• Issue with a point coordinates, which creates an unwanted triangle

  - by Paul

  I would like to connect the points from the red path, to the y-axis in blue. I figured out that the problem with my triangles came from the first point (V0) : it is not located where it should be. In the console, it says its location is at 0,0, but in the emulator, it is not. The code : for(int i = 1; i < 2; i++) { CCLOG(@"_polyVertices[i-1].x : %f, _polyVertices[i-1].y : %f", _polyVertices[i-1].x, _polyVertices[i-1].y); CCLOG(@"_polyVertices[i].x : %f, _polyVertices[i].y : %f", _polyVertices[i].x, _polyVertices[i].y); ccDrawLine(_polyVertices[i-1], _polyVertices[i]); } The output : _polyVertices[i-1].x : 0.000000, _polyVertices[i-1].y : 0.000000 _polyVertices[i].x : 50.000000, _polyVertices[i].y : 0.000000 And the result : (the layer goes up, i could not take the screenshot before the layer started to go up, but the first red point starts at y=0) : Then it creates an unwanted triangle when the code continues : Would you have any idea about this? (So to force the first blue point to start at 0,0, and not at 50,0 as it seems to be now) Here is the code : - (void)generatePath{ float x = 50; //first red point float y = 0; for(int i = 0; i < kMaxKeyPoints+1; i++) { if (i<3){ _hillKeyPoints[i] = CGPointMake(x, y); x = 150 + (random() % (int) 30); y += -40; } else if(i<20){ //going right _hillKeyPoints[i] = CGPointMake(x, y); x += (random() % (int) 30); y += -40; } else if(i<25){ //stabilize _hillKeyPoints[i] = CGPointMake(x, y); x = 150 + (random() % (int) 30); y += -40; } else if(i<30){ //going left _hillKeyPoints[i] = CGPointMake(x, y); //x -= (random() % (int) 10); x = 150 + (random() % (int) 30); y += -40; } else { //back to normal _hillKeyPoints[i] = CGPointMake(x, y); x = 150 + (random() % (int) 30); y += -40; } } } -(void)generatePolygons{ static int prevFromKeyPointI = -1; static int prevToKeyPointI = -1; // key points interval for drawing while (_hillKeyPoints[_fromKeyPointI].y > -_offsetY+winSizeTop) { _fromKeyPointI++; } while (_hillKeyPoints[_toKeyPointI].y > -_offsetY-winSizeBottom) { _toKeyPointI++; } if (prevFromKeyPointI != _fromKeyPointI || prevToKeyPointI != _toKeyPointI) { _nPolyVertices = 0; float x1 = 0; int keyPoints = _fromKeyPointI; for (int i=_fromKeyPointI; i<_toKeyPointI; i++){ //V0: at (0,0) _polyVertices[_nPolyVertices] = CGPointMake(x1, y1); //first blue point _polyTexCoords[_nPolyVertices++] = CGPointMake(x1, y1); //V1: to the first "point" _polyVertices[_nPolyVertices] = CGPointMake(_hillKeyPoints[keyPoints].x, _hillKeyPoints[keyPoints].y); _polyTexCoords[_nPolyVertices++] = CGPointMake(_hillKeyPoints[keyPoints].x, _hillKeyPoints[keyPoints].y); keyPoints++; //from point at index 0 to 1 //V2, same y as point n°2: _polyVertices[_nPolyVertices] = CGPointMake(0, _hillKeyPoints[keyPoints].y); _polyTexCoords[_nPolyVertices++] = CGPointMake(0, _hillKeyPoints[keyPoints].y); //V1 again _polyVertices[_nPolyVertices] = _polyVertices[_nPolyVertices-2]; _polyTexCoords[_nPolyVertices++] = _polyVertices[_nPolyVertices-2]; //V2 again _polyVertices[_nPolyVertices] = _polyVertices[_nPolyVertices-2]; _polyTexCoords[_nPolyVertices++] = _polyVertices[_nPolyVertices-2]; //CCLOG(@"_nPolyVertices V2 again : %i", _nPolyVertices); //V3 = same x,y as point at index 1 _polyVertices[_nPolyVertices] = CGPointMake(_hillKeyPoints[keyPoints].x, _hillKeyPoints[keyPoints].y); _polyTexCoords[_nPolyVertices] = CGPointMake(_hillKeyPoints[keyPoints].x, _hillKeyPoints[keyPoints].y); y1 = _polyVertices[_nPolyVertices].y; _nPolyVertices++; } prevFromKeyPointI = _fromKeyPointI; prevToKeyPointI = _toKeyPointI; } } - (void) draw { //RED glColor4f(1, 1, 1, 1); for(int i = MAX(_fromKeyPointI, 1); i <= _toKeyPointI; ++i) { glColor4f(1.0, 0, 0, 1.0); ccDrawLine(_hillKeyPoints[i-1], _hillKeyPoints[i]); } //BLUE glColor4f(0, 0, 1, 1); for(int i = 1; i < 2; i++) { CCLOG(@"_polyVertices[i-1].x : %f, _polyVertices[i-1].y : %f", _polyVertices[i-1].x, _polyVertices[i-1].y); CCLOG(@"_polyVertices[i].x : %f, _polyVertices[i].y : %f", _polyVertices[i].x, _polyVertices[i].y); ccDrawLine(_polyVertices[i-1], _polyVertices[i]); } } Thanks

  Read the article

• Common reasons for the &lsquo;Sys is undefined&rsquo; error in ASP.NET Ajax applications

    In this blog I will try to summarize the most common reasons for getting the famous 'Sys is undefined' error when running an Ajax enabled web site or application (there are almost one milion results on Google for that phrase). Where does it come from? In every Ajax web pages source you will see a code like this: <script type="text/javascript"> //<![CDATA[ Sys.WebForms.PageRequestManager._initialize('ScriptManager1', document.getElementById('form1')); Sys.WebForms.PageRequestManager.getInstance()._updateControls([], [], [], 90); //]]> </script>   This is the initialization script of the ScriptManager. So, if for some reason the Sys namespace is not available when the code executes you get the Sys is undefined error. Here are the most common reasons and solutions for that problem:   1. The error occurs when you have added a control from RadControls for ASP.NET AJAX, but your application is not configured to use ASP.NET AJAX. For example, in VS 2005 you created a new Blank Site instead of a new Ajax-Enabled Web Site and the Sys is undefined message pops up. To fix it you need to follow the steps described at Configuring ASP.NET Ajax article (check the topic called Adding ASP.NET AJAX Configuration Elements to an Existing Web Site) or simply create the Ajax-Enabled Web Site. You can also check my other blog post on the matter: Visual Studio 2008: Where is the new ASP.NET Ajax-Enabled Web Site template?   2. Authentication - as the website denies access to all pages to unauthorized users, access to the Telerik.Web.UI.WebResource.axd handler is unauthorized (this is the default handler of RadScriptManager). This causes the handler to serve the content of the login page instead of the combined scripts, hence the error. To solve it - add a <location> section to the application configuration file to allow access to Telerik.Web.UI.WebResource.axd to all users, like: <configuration> ... <location path="Telerik.Web.UI.WebResource.axd"> <system.web> <authorization> <allow users="*"/> </authorization> </system.web> </location> ... </configuration>   Note that the access to the standard ScriptResource.axd and WebResource.axd is automatically allowed for all users (authenticated and unauthenticated), so if you use the ScriptManager instead of RadScriptManager - you will not face this problem. The authentication problem does not manifest when you disable script combining or use the CDN. Adding the above configuration section will make it work with RadScriptManagers combined script.   3. The IE6 browser fails to load the compressed script. The problem does not appear in any other browser. There is a well known bug in the older versions of IE6 which lose the first 2,048 bytes of data that are sent back from a Web server that uses HTTP compression. Latest versions of RadScriptManager does not compress the output at all if the client is IE6, but in the previous versions you need to manually disable the output compression to prevent the error. So, if you get the Sys is undefined error in IE6 - update to the latest version of RadControls or simply disable the output compression.   4. Requests to the *.axd files returns Error Code 404 - Not Found. This could  be fixed easily: Check in the IIS management console that the .axd extension (the default HTTP handler extension) is allowed:     Also check if the Verify if file exists checkbox is unchecked (click on the Edit button appearing in the previous screenshot to check). More information can be found in our troubleshooting article and from the ASP.NET QA team blog post   5. The virtual directory in IIS is not marked as Web Application. Converting it to Web Application should fix the problem.   6. Check for the <xhtmlConformance mode="Legacy"/> option in your web.config and remove it. It would be rather rare to become a victim of this exact case, but still have it in mind. Scott Guthrie describes it in more details   In the above points I mentioned several times the terms web resources, javascript output, compressed script. If you want to find out more about these please see the Web Resources Demystified series of my friend and colleague Atanas Korchev   I hope that one of the above solutions will help you get rid of the Sys is undefined error.   Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• WEBLOGIC 12C HANDS-ON BOOTCAMP

  - by agallego

    Oracle PartnerNetwork | Account | Feedback   JOIN THE ORACLE WEBLOGIC PARTNER COMMUNITY AND ATTEND A WEBLOGIC 12C HANDS-ON BOOTCAMP Dear partner As a valued partner we would like to invite you for the WebLogic Partner Community and our WebLogic 12c hands-on Bootcamps – free of charge! Please first login at http://partner.oracle.com and then visit: WebLogic Partner Community. (If you need support with your account please contact the Oracle Partner Business Center). The goal of the WebLogic Partner Community is to provide you with the latest information on Oracle's offerings and to facilitate the exchange of experience within community members. Register Now FREE Assessment vouchers to become certified and WebLogic Server 12c 200 new Features and Training Connect and Network   WebLogic Blogs   WebLogic on Facebook   WebLogic on LinkedIn   WebLogic on Twitter   WebLogic on Oracle Mix WebLogic 12c hands-on Workshops We offer free3 days hands-on WebLogic 12c workshops for Oracle partners who want to become Application Grid Specialized: Register Here! Country Date Location Registration   Germany  3-5 April 2012 Oracle Düsseldorf Click here   France  24-26 April 2012 Oracle Colombes Click here   Spain 08-10 May 2012  Oracle Madrid  Click here   Netherlands  22-24 May 2012  Oracle Amsterdam  Click here   United Kingdom  06-08 June 2012  Oracle Reading  Click here   Italy  19-21 June 2012  Oracle Cinisello Balsamo  Click here   Portugal  10-12 July 2012  Oracle Lisbon  Click here Skill requirements Attendees need to have the following skills as this is required by the product-set and to make sure they get the most out of the training: Basic knowledge in Java and JavaEE Understanding the Application Server concept Basic knowledge in older releases of WebLogic Server would be beneficial Member of WebLogic Partner Community for registration please vist http://www.oracle.com/partners/goto/wls-emea Hardware requirements Every participant works on his own notebook. The minimal hardware requirements are: 4Gb physical RAM (we will boot the image with 2Gb RAM)  dual core CPU 15 GB HD Software requirements Please install Oracle VM VirtualBox 4.1.8 Follow-up and certification  With the workshop registration you agree to the following next steps Follow-up training attend and pass the Oracle Application Grid Certified Implementation Specialist Registration For details and registration please visit Register Here Free WebLogic Certification (Free assessment voucher to become certified) For all WebLogic experts, we offer free vouchers worth $195 for the Oracle Application Grid Certified Implementation Specialist assessment. To demonstrate your WebLogic knowledge you first have to pass the free online assessment Oracle Application Grid PreSales Specialist. For free vouchers, please send an e-mail with the screenshot of your Oracle Application Grid PreSales certirficate to [email protected] including your Name, Company, E-mail and Country. Note: This offer is limited to partners from Europe Middle East and Africa. Partners from other countries please contact your Oracle partner manager. WebLogic Specialization To become specialized in Application Grid, please make sure that you access the: Application Grid Specialization Guide Application Grid Specialization Checklist If you have any questions please contact the Oracle Partner Business Center. Oracle WebLogic Server 12c Key New Capabilities Java EE 6 and Developer Productivity Simplified Deployment and Management with Virtualization Integrated Traffic Management Enhanced High Availability and Disaster Recovery Much Higher Performance For more information please visit: Presentation from the WebLogic 12c launch Technical Presentation from the WebLogic 12c launch WebLogic OTN Website WebLogic 12c Virtual Conference Environment WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea (OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Best regards, Jürgen Kress WebLogic Partner Adoption EMEA Tel. +49 89 1430 1479 E-Mail: [email protected]   Copyright © 2012, Oracle and/or its affiliates. All rights reserved. Contact PBC | Legal Notices and Terms of Use | Privacy Statement Oracle Corporation - Worldwide Headquarters, 500 Oracle Parkway, OPL - E-mail Services, Redwood Shores, CA 94065, United States Your privacy is important to us. You can login to your account to update your e-mail subscriptions or you can opt-out of all Oracle Marketing e-mails at any time. Please note that opting-out of Marketing communications does not affect your receipt of important business communications related to your current relationship with Oracle such as Security Updates, Event Registration notices, Account Management and Support/Service communications.

  Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >