Search Results

Search found 30085 results on 1204 pages for 'sql trace'.

Page 74/1204 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

• Trace flags - TF 1117

  - by Damian

  I had a session about trace flags this year on the SQL Day 2014 conference that was held in Wroclaw at the end of April. The session topic is important to most of DBA's and the reason I did it was that I sometimes forget about various trace flags :). So I decided to prepare a presentation but I think it is a good idea to write posts about trace flags, too. Let's start then - today I will describe the TF 1117. I assume that we all know how to setup a TF using starting parameters or registry or in the session or on the query level. I will always write if a trace flag is local or global to make sure we know how to use it. Why do we need this trace flag? Let’s create a test database first. This is quite ordinary database as it has two data files (4 MB each) and a log file that has 1MB. The data files are able to expand by 1 MB and the log file grows by 10%: USE [master] GO CREATE DATABASE [TF1117]  ON  PRIMARY ( NAME = N'TF1117',      FILENAME = N'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\TF1117.mdf' ,      SIZE = 4096KB ,      MAXSIZE = UNLIMITED,      FILEGROWTH = 1024KB ), ( NAME = N'TF1117_1',      FILENAME = N'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\TF1117_1.ndf' ,      SIZE = 4096KB ,      MAXSIZE = UNLIMITED,      FILEGROWTH = 1024KB )  LOG ON ( NAME = N'TF1117_log',      FILENAME = N'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\TF1117_log.ldf' ,      SIZE = 1024KB ,      MAXSIZE = 2048GB ,      FILEGROWTH = 10% ) GO Without the TF 1117 turned on the data files don’t grow all up at once. When a first file is full the SQL Server expands it but the other file is not expanded until is full. Why is that so important? The SQL Server proportional fill algorithm will direct new extent allocations to the file with the most available space so new extents will be written to the file that was just expanded. When the TF 1117 is enabled it will cause all files to auto grow by their specified increment. That means all files will have the same percent of free space so we still have the benefit of evenly distributed IO. The TF 1117 is global flag so it affects all databases on the instance. Of course if a filegroup contains only one file the TF does not have any effect on it. Now let’s do a simple test. First let’s create a table in which every row will fit to a single page: The table definition is pretty simple as it has two integer columns and one character column of fixed size 8000 bytes: create table TF1117Tab (      col1 int,      col2 int,      col3 char (8000) ) go Now I load some data to the table to make sure that one of the data file must grow: declare @i int select @i = 1 while (@i < 800) begin       insert into TF1117Tab  values (@i, @i+1000, 'hello')        select @i= @i + 1 end I can check the actual file size in the sys.database_files DMV: SELECT name, (size*8)/1024 'Size in MB' FROM sys.database_files  GO   As you can see only the first data file was  expanded and the other has still the initial size:   name                  Size in MB --------------------- ----------- TF1117                5 TF1117_log            1 TF1117_1              4 There is also other methods of looking at the events of file autogrows. One possibility is to create an Extended Events session and the other is to look into the default trace file:     DECLARE @path NVARCHAR(260); SELECT    @path = REVERSE(SUBSTRING(REVERSE([path]),          CHARINDEX('\', REVERSE([path])), 260)) + N'log.trc' FROM    sys.traces WHERE   is_default = 1; SELECT    DatabaseName,                 [FileName],                 SPID,                 Duration,                 StartTime,                 EndTime,                 FileType =                         CASE EventClass                                     WHEN 92 THEN 'Data'                                    WHEN 93 THEN 'Log'             END FROM sys.fn_trace_gettable(@path, DEFAULT) WHERE   EventClass IN (92,93) AND StartTime >'2014-07-12' AND DatabaseName = N'TF1117' ORDER BY   StartTime DESC;   After running the query I can see the file was expanded and how long did the process take which might be useful from the performance perspective.    Now it’s time to turn on the flag 1117. DBCC TRACEON(1117)   I dropped the database and recreated it once again. Then I ran the queries and observed the results. After loading the records I see that both files were evenly expanded: name                  Size in MB --------------------- ----------- TF1117                5 TF1117_log            1 TF1117_1              5 I found also information in the default trace. The query returned three rows. The last one is connected to my first experiment when the TF was turned off.  The two rows shows that first file was expanded by 1MB and right after that operation the second file was expanded, too. This is what is this TF all about J  

  Read the article

• Required Parameters [SSIS Denali]

  - by jamiet

  SQL Server Integration Services (SSIS) in its 2005 and 2008 incarnations expects you to set a property values within your package at runtime using Configurations. SSIS developers tend to have rather a lot of issues with SSIS configurations; in this blog post I am going to highlight one of those problems and how it has been alleviated in SQL Server code-named Denali.   A configuration is a property path/value pair that exists outside of a package, typically within SQL Server or in a collection of one or more configurations in a file called a .dtsConfig file. Within the package one defines a pointer to a configuration that says to the package “When you execute, go and get a configuration value from this location” and if all goes well the package will fetch that configuration value as it starts to execute and you will see something like the following in your output log: Information: 0x40016041 at Package: The package is attempting to configure from the XML file "C:\Configs\MyConfig.dtsConfig". Unfortunately things DON’T always go well, perhaps the .dtsConfig file is unreachable or the name of the SQL Sever holding the configuration value has been defined incorrectly – any one of a number of things can go wrong. In this circumstance you might see something like the following in your log output instead: Warning: 0x80012014 at Package: The configuration file "C:\Configs\MyConfig.dtsConfig" cannot be found. Check the directory and file name. The problem that I want to draw attention to here though is that your package will ignore the fact it can’t find the configuration and executes anyway. This is really really bad because the package will not be doing what it is supposed to do and worse, if you have not isolated your environments you might not even know about it. Can you imagine a package executing for months and all the while inserting data into the wrong server? Sounds ridiculous but I have absolutely seen this happen and the root cause was that no-one picked up on configuration warnings like the one above. Happily in SSIS code-named Denali this problem has gone away as configurations have been replaced with parameters. Each parameter has a property called ‘Required’: Any parameter with Required=True must have a value passed to it when the package executes. Any attempt to execute the package will result in an error. Here we see that error when attempting to execute using the SSMS UI: and similarly when executing using T-SQL: Error is: Msg 27184, Level 16, State 1, Procedure prepare_execution, Line 112 In order to execute this package, you need to specify values for the required parameters.   As you can see, SSIS code-named Denali has mechanisms built-in to prevent the problem I described at the top of this blog post. Specifying a Parameter required means that any packages in that project cannot execute until a value for the parameter has been supplied. This is a very good thing. I am loathe to make recommendations so early in the development cycle but right now I’m thinking that all Project Parameters should have Required=True, certainly any that are used to define external locations should be anyway. @Jamiet

  Read the article

• DATEFROMPARTS

  - by jamiet

  I recently overheard a remark by Greg Low in which he said something akin to "the most interesting parts of a new SQL Server release are the myriad of small things that are in there that make a developer's life easier" (I'm paraphrasing because I can't remember the actual quote but it was something like that). The new DATEFROMPARTS function is a classic example of that . It simply takes three integer parameters and builds a date out of them (if you have used DateSerial in Reporting Services then you'll understand). Take the following code which generates the first and last day of some given years: SELECT 2008 AS Yr INTO #Years UNION ALL SELECT 2009 UNION ALL SELECT 2010 UNION ALL SELECT 2011 UNION ALL SELECT 2012SELECT [FirstDayOfYear] = CONVERT(DATE,CONVERT(CHAR(8),((y.[Yr] * 10000) + 101))),      [LastDayOfYear] = CONVERT(DATE,CONVERT(CHAR(8),((y.[Yr] * 10000) + 1231)))FROM   #Years y here are the results: That code is pretty gnarly though with those CONVERTs in there and, worse, if the character string is constructed in a certain way then it could fail due to localisation, check this out: SET LANGUAGE french;SELECT dt,Month_Name=DATENAME(mm,dt)FROM   (       SELECT  dt = CONVERT(DATETIME,CONVERT(CHAR(4),y.[Yr]) + N'-01-02')       FROM    #Years y       )d;SET LANGUAGE us_english;SELECT dt,Month_Name=DATENAME(mm,dt)FROM   (       SELECT  dt = CONVERT(DATETIME,CONVERT(CHAR(4),y.[Yr]) + N'-01-02')       FROM    #Years y       )d; Notice how the datetime has been converted differently based on the language setting. When French, the string "2012-01-02" gets interpreted as 1st February whereas when us_english the same string is interpreted as 2nd January. Instead of all this CONVERTing nastiness we have DATEFROMPARTS: SELECT [FirstDayOfYear] = DATEFROMPARTS(y.[Yr],1,1),    [LasttDayOfYear] = DATEFROMPARTS(y.[Yr],12,31)FROM   #Years y How much nicer is that? The bad news of course is that you have to upgrade to SQL Server 2012 or migrate to SQL Azure if you want to use it, as is the way of the world! Don't forget that if you want to try this code out on SQL Azure right this second, for free, you can do so by connecting up to AdventureWorks On Azure. You don't even need to have SSMS handy - a browser that runs Silverlight will do just fine. Simply head to https://mhknbn2kdz.database.windows.net/ and use the following credentials: Database AdventureWorks2012 User sqlfamily Password sqlf@m1ly One caveat, SELECT INTO doesn't work on SQL Azure so you'll have to use this instead: DECLARE @y TABLE ( [Yr] INT);INSERT @y([Yr])SELECT 2008 AS Yr UNION ALL SELECT 2009 UNION ALL SELECT 2010 UNION ALL SELECT 2011 UNION ALL SELECT 2012;SELECT [FirstDayOfYear] = DATEFROMPARTS(y.[Yr],1,1),      [LastDayOfYear] = DATEFROMPARTS(y.[Yr],12,31)FROM @y y;SELECT [FirstDayOfYear] = CONVERT(DATE,CONVERT(CHAR(8),((y.[Yr] * 10000) + 101))),      [LastDayOfYear] = CONVERT(DATE,CONVERT(CHAR(8),((y.[Yr] * 10000) + 1231)))FROM @y y; @Jamiet

  Read the article

• ?????create or replace???PL/SQL??

  - by Liu Maclean(???)

  ????T.Askmaclean.com?????10gR2??????procedure,?????????create or replace ??????????????????,????Oracle???????????????????procedure? ??Maclean ??2?10gR2???????????PL/SQL?????: ??1: ??Flashback Query ????,?????????????flashback database,??????????create or replace???SQL??source$??????????undo data,????????????: SQL> select * from V$version; BANNER ---------------------------------------------------------------- Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi PL/SQL Release 10.2.0.5.0 - Production CORE 10.2.0.5.0 Production TNS for Linux: Version 10.2.0.5.0 - Production NLSRTL Version 10.2.0.5.0 - Production SQL> select * from global_name; GLOBAL_NAME -------------------------------------------------------------------------------- www.oracledatabase12g.com SQL> create or replace procedure maclean_proc as   2  begin   3  execute immediate 'select 1 from dual';   4  end;   5  / Procedure created. SQL> select * from dba_source where name='MACLEAN_PROC'; OWNER      NAME                           TYPE               LINE TEXT ---------- ------------------------------ ------------ ---------- -------------------------------------------------- SYS        MACLEAN_PROC                   PROCEDURE             1 procedure maclean_proc as SYS        MACLEAN_PROC                   PROCEDURE             2 begin SYS        MACLEAN_PROC                   PROCEDURE             3 execute immediate 'select 1 from dual'; SYS        MACLEAN_PROC                   PROCEDURE             4 end; SQL> select current_scn from v$database; CURRENT_SCN -----------     2660057 create or replace procedure maclean_proc as begin -- I am new procedure execute immediate 'select 2 from dual'; end; / Procedure created. SQL> select current_scn from v$database; CURRENT_SCN -----------     2660113 SQL> select * from dba_source where name='MACLEAN_PROC'; OWNER      NAME                           TYPE               LINE TEXT ---------- ------------------------------ ------------ ---------- -------------------------------------------------- SYS        MACLEAN_PROC                   PROCEDURE             1 procedure maclean_proc as SYS        MACLEAN_PROC                   PROCEDURE             2 begin SYS        MACLEAN_PROC                   PROCEDURE             3 -- I am new procedure SYS        MACLEAN_PROC                   PROCEDURE             4 execute immediate 'select 2 from dual'; SYS        MACLEAN_PROC                   PROCEDURE             5 end; SQL> create table old_source as select * from dba_source as of scn 2660057 where name='MACLEAN_PROC'; Table created. SQL> select * from old_source where name='MACLEAN_PROC'; OWNER      NAME                           TYPE               LINE TEXT ---------- ------------------------------ ------------ ---------- -------------------------------------------------- SYS        MACLEAN_PROC                   PROCEDURE             1 procedure maclean_proc as SYS        MACLEAN_PROC                   PROCEDURE             2 begin SYS        MACLEAN_PROC                   PROCEDURE             3 execute immediate 'select 1 from dual'; SYS        MACLEAN_PROC                   PROCEDURE             4 end; ?????????scn??flashback query????,????????as of timestamp??????????,????PL/SQL????????????????undo??????????,????????????replace/drop ??????PL/SQL??? ??2 ??logminer??replace/drop PL/SQL?????SQL???DELETE??,??logminer?UNDO SQL???PL/SQL?????? ????????????????archivelog????,??????????????? minimal supplemental logging,??????????Unsupported SQLREDO???: create or replace?? ?? procedure???????SQL??????, ??????procedure????????????????, source$??????????????: SQL> ALTER DATABASE ADD SUPPLEMENTAL LOG DATA; Database altered. SQL> create or replace procedure maclean_proc as   2  begin   3  execute immediate 'select 1 from dual';   4  end;   5  / Procedure created. SQL> SQL> oradebug setmypid; Statement processed. SQL> SQL> oradebug event 10046 trace name context forever,level 12; Statement processed. SQL> SQL> create or replace procedure maclean_proc as   2  begin   3  execute immediate 'select 2 from dual';   4  end;   5  / Procedure created. SQL> oradebug tracefile_name /s01/admin/G10R25/udump/g10r25_ora_4305.trc [oracle@vrh8 ~]$ egrep  "update|insert|delete|merge"  /s01/admin/G10R25/udump/g10r25_ora_4305.trc delete from procedureinfo$ where obj#=:1 delete from argument$ where obj#=:1 delete from procedurec$ where obj#=:1 delete from procedureplsql$ where obj#=:1 delete from procedurejava$ where obj#=:1 delete from vtable$ where obj#=:1 insert into procedureinfo$(obj#,procedure#,overload#,procedurename,properties,itypeobj#) values (:1,:2,:3,:4,:5,:6) insert into argument$( obj#,procedure$,procedure#,overload#,position#,sequence#,level#,argument,type#,default#,in_out,length,precision#,scale,radix,charsetid,charsetform,properties,type_owner,type_name,type_subname,type_linkname,pls_type) values (:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11,:12,:13,:14,:15,:16,:17,:18,:19,:20,:21,:22,:23) insert into procedureplsql$(obj#,procedure#,entrypoint#) values (:1,:2,:3) update procedure$ set audit$=:2,options=:3 where obj#=:1 delete from source$ where obj#=:1 insert into source$(obj#,line,source) values (:1,:2,:3) delete from idl_ub1$ where obj#=:1 and part=:2 and version<>:3 delete from idl_char$ where obj#=:1 and part=:2 and version<>:3 delete from idl_ub2$ where obj#=:1 and part=:2 and version<>:3 delete from idl_sb4$ where obj#=:1 and part=:2 and version<>:3 delete from ncomp_dll$ where obj#=:1 returning dllname into :2 update idl_sb4$ set piece#=:1 ,length=:2 , piece=:3 where obj#=:4 and part=:5 and piece#=:6 and version=:7 update idl_ub1$ set piece#=:1 ,length=:2 , piece=:3 where obj#=:4 and part=:5 and piece#=:6 and version=:7 update idl_char$ set piece#=:1 ,length=:2 , piece=:3 where obj#=:4 and part=:5 and piece#=:6 and version=:7 update idl_ub2$ set piece#=:1 ,length=:2 , piece=:3 where obj#=:4 and part=:5 and piece#=:6 and version=:7 delete from idl_ub1$ where obj#=:1 and part=:2 and version<>:3 delete from idl_char$ where obj#=:1 and part=:2 and version<>:3 delete from idl_ub2$ where obj#=:1 and part=:2 and version<>:3 delete from idl_sb4$ where obj#=:1 and part=:2 and version<>:3 delete from ncomp_dll$ where obj#=:1 returning dllname into :2 delete from idl_ub1$ where obj#=:1 and part=:2 and (piece#<:3 or piece#>:4) and version=:5 delete from idl_char$ where obj#=:1 and part=:2 and (piece#<:3 or piece#>:4) and version=:5 delete from idl_ub2$ where obj#=:1 and part=:2 and (piece#<:3 or piece#>:4) and version=:5 delete from idl_sb4$ where obj#=:1 and part=:2 and (piece#<:3 or piece#>:4) and version=:5 delete from idl_ub1$ where obj#=:1 and part=:2 and version<>:3 delete from idl_char$ where obj#=:1 and part=:2 and version<>:3 delete from idl_ub2$ where obj#=:1 and part=:2 and version<>:3 delete from idl_sb4$ where obj#=:1 and part=:2 and version<>:3 delete from ncomp_dll$ where obj#=:1 returning dllname into :2 update idl_sb4$ set piece#=:1 ,length=:2 , piece=:3 where obj#=:4 and part=:5 and piece#=:6 and version=:7 update idl_ub1$ set piece#=:1 ,length=:2 , piece=:3 where obj#=:4 and part=:5 and piece#=:6 and version=:7 delete from idl_char$ where obj#=:1 and part=:2 and (piece#<:3 or piece#>:4) and version=:5 delete from idl_ub2$ where obj#=:1 and part=:2 and (piece#<:3 or piece#>:4) and version=:5 delete from error$ where obj#=:1 delete from settings$ where obj# = :1 insert into settings$(obj#, param, value) values (:1, :2, :3) delete from warning_settings$ where obj# = :1 insert into warning_settings$(obj#, warning_num, global_mod, property) values (:1, :2, :3, :4) delete from dependency$ where d_obj#=:1 delete from access$ where d_obj#=:1 insert into dependency$(d_obj#,d_timestamp,order#,p_obj#,p_timestamp, property, d_attrs)values (:1,:2,:3,:4,:5,:6, :7) insert into access$(d_obj#,order#,columns,types) values (:1,:2,:3,:4) update obj$ set obj#=:6,type#=:7,ctime=:8,mtime=:9,stime=:10,status=:11,dataobj#=:13,flags=:14,oid$=:15,spare1=:16, spare2=:17 where owner#=:1 and name=:2 and namespace=:3 and(remoteowner=:4 or remoteowner is null and :4 is null)and(linkname=:5 or linkname is null and :5 is null)and(subname=:12 or subname is null and :12 is null) ?drop procedure??????source$???PL/SQL?????: SQL> oradebug setmypid; Statement processed. SQL> oradebug event 10046 trace name context forever,level 12; Statement processed. SQL> drop procedure maclean_proc; Procedure dropped. SQL> oradebug tracefile_name /s01/admin/G10R25/udump/g10r25_ora_4331.trc delete from context$ where obj#=:1 delete from dir$ where obj#=:1 delete from type_misc$ where obj#=:1 delete from library$ where obj#=:1 delete from procedure$ where obj#=:1 delete from javaobj$ where obj#=:1 delete from operator$ where obj#=:1 delete from opbinding$ where obj#=:1 delete from opancillary$ where obj#=:1 delete from oparg$ where obj# = :1 delete from com$ where obj#=:1 delete from source$ where obj#=:1 delete from idl_ub1$ where obj#=:1 and part=:2 delete from idl_char$ where obj#=:1 and part=:2 delete from idl_ub2$ where obj#=:1 and part=:2 delete from idl_sb4$ where obj#=:1 and part=:2 delete from ncomp_dll$ where obj#=:1 returning dllname into :2 delete from idl_ub1$ where obj#=:1 and part=:2 delete from idl_char$ where obj#=:1 and part=:2 delete from idl_ub2$ where obj#=:1 and part=:2 delete from idl_sb4$ where obj#=:1 and part=:2 delete from ncomp_dll$ where obj#=:1 returning dllname into :2 delete from idl_ub1$ where obj#=:1 and part=:2 delete from idl_char$ where obj#=:1 and part=:2 delete from idl_ub2$ where obj#=:1 and part=:2 delete from idl_sb4$ where obj#=:1 and part=:2 delete from ncomp_dll$ where obj#=:1 returning dllname into :2 delete from error$ where obj#=:1 delete from settings$ where obj# = :1 delete from procedureinfo$ where obj#=:1 delete from argument$ where obj#=:1 delete from procedurec$ where obj#=:1 delete from procedureplsql$ where obj#=:1 delete from procedurejava$ where obj#=:1 delete from vtable$ where obj#=:1 delete from dependency$ where d_obj#=:1 delete from access$ where d_obj#=:1 delete from objauth$ where obj#=:1 update obj$ set obj#=:6,type#=:7,ctime=:8,mtime=:9,stime=:10,status=:11,dataobj#=:13,flags=:14,oid$=:15,spare1=:16, spare2=:17 where owner#=:1 and name=:2 and namespace=:3 and(remoteowner=:4 or remoteowner is null and :4 is null)and(linkname=:5 or linkname is null and :5 is null)and(subname=:12 or subname is null and :12 is null) ??????????source$???redo: SQL> alter system switch logfile; System altered. SQL> select sequence#,name from v$archived_log where sequence#=(select max(sequence#) from v$archived_log);  SEQUENCE# ---------- NAME --------------------------------------------------------------------------------        242 /s01/flash_recovery_area/G10R25/archivelog/2012_05_21/o1_mf_1_242_7vnm13k6_.arc SQL> exec dbms_logmnr.add_logfile ('/s01/flash_recovery_area/G10R25/archivelog/2012_05_21/o1_mf_1_242_7vnm13k6_.arc',options => dbms_logmnr.new); PL/SQL procedure successfully completed. SQL> exec dbms_logmnr.start_logmnr(options => dbms_logmnr.dict_from_online_catalog); PL/SQL procedure successfully completed. SQL> select sql_redo,sql_undo from v$logmnr_contents where seg_name = 'SOURCE$' and operation='DELETE'; delete from "SYS"."SOURCE$" where "OBJ#" = '56059' and "LINE" = '1' and "SOURCE" = 'procedure maclean_proc as ' and ROWID = 'AAAABIAABAAALpyAAN'; insert into "SYS"."SOURCE$"("OBJ#","LINE","SOURCE") values ('56059','1','procedure maclean_proc as '); delete from "SYS"."SOURCE$" where "OBJ#" = '56059' and "LINE" = '2' and "SOURCE" = 'begin ' and ROWID = 'AAAABIAABAAALpyAAO'; insert into "SYS"."SOURCE$"("OBJ#","LINE","SOURCE") values ('56059','2','begin '); delete from "SYS"."SOURCE$" where "OBJ#" = '56059' and "LINE" = '3' and "SOURCE" = 'execute immediate ''select 1 from dual''; ' and ROWID = 'AAAABIAABAAALpyAAP'; insert into "SYS"."SOURCE$"("OBJ#","LINE","SOURCE") values ('56059','3','execute immediate ''select 1 from dual''; '); delete from "SYS"."SOURCE$" where "OBJ#" = '56059' and "LINE" = '4' and "SOURCE" = 'end;' and ROWID = 'AAAABIAABAAALpyAAQ'; insert into "SYS"."SOURCE$"("OBJ#","LINE","SOURCE") values ('56059','4','end;'); delete from "SYS"."SOURCE$" where "OBJ#" = '56059' and "LINE" = '1' and "SOURCE" = 'procedure maclean_proc as ' and ROWID = 'AAAABIAABAAALpyAAJ'; insert into "SYS"."SOURCE$"("OBJ#","LINE","SOURCE") values ('56059','1','procedure maclean_proc as '); delete from "SYS"."SOURCE$" where "OBJ#" = '56059' and "LINE" = '2' and "SOURCE" = 'begin ' and ROWID = 'AAAABIAABAAALpyAAK'; insert into "SYS"."SOURCE$"("OBJ#","LINE","SOURCE") values ('56059','2','begin '); delete from "SYS"."SOURCE$" where "OBJ#" = '56059' and "LINE" = '3' and "SOURCE" = 'execute immediate ''select 2 from dual''; ' and ROWID = 'AAAABIAABAAALpyAAL'; insert into "SYS"."SOURCE$"("OBJ#","LINE","SOURCE") values ('56059','3','execute immediate ''select 2 from dual''; '); delete from "SYS"."SOURCE$" where "OBJ#" = '56059' and "LINE" = '4' and "SOURCE" = 'end;' and ROWID = 'AAAABIAABAAALpyAAM'; insert into "SYS"."SOURCE$"("OBJ#","LINE","SOURCE") values ('56059','4','end;'); ???? logminer???UNDO SQL???????source$????,?DELETE????????????,????SOURCE????????????PL/SQL???DDL???

  Read the article

• Add Trace methods to System.Diagnostics.TraceListner

  - by user200295

  I wrote a Log class derived from System.Diagnostics.TraceListener like so public class Log : TraceListener This acts as a wrapper to Log4Net and allows people to use System.Diagnostics Tracing like so Trace.Listeners.Clear(); Trace.Listeners.Add(new Log("MyProgram")); Trace.TraceInformation("Program Starting"); There is a request to add additional tracing levels then the default Trace ones (Error,Warning,Information) I want to have this added to the System.Diagnostics.Trace so it can be used like Trace.TraceVerbose("blah blah"); Trace.TraceAlert("Alert!"); Is there any way I can do this with an extension class? I tried public static class TraceListenerExtensions { public static void TraceVerbose(this Trace trace) {} } but nothing is being exposed on the trace instance being passed in :(

  Read the article

• How can I filter the WCF Trace?

  - by Lawrence A. Contreras

  I need to get the following information during tracing: 1. I need to know how long an operation was executed. 2. I need to know if the operation(method in the service) is executed successfully. 3. I need to know if there's an error. I know that we can see all of that using the Service Trace Viewer, but is there a way that I can filter the information to the things mentioned above?

  Read the article

• sql-server: Can I update two table with Single Query?

  - by RedsDevils

  How can I write single UPDATE query to change value of COL1 to ‘X’ if COL2 < 10 otherwise change it to ‘Y’, where the following two tables are linked by ID CREATE TABLE TEMP(ID TINYINT, COL1 CHAR(1)) INSERT INTO TEMP(ID,COL1) VALUES (1,'A') INSERT INTO TEMP(ID,COL1) VALUES (2,'B') INSERT INTO TEMP(ID,COL1) VALUES (11,'A') INSERT INTO TEMP(ID,COL1) VALUES (17,'B') CREATE TABLE TEMP2(ID TINYINT, COL2 TINYINT) INSERT INTO TEMP2(ID,COL2) VALUES (1,1) INSERT INTO TEMP2(ID,COL2) VALUES (2,5) INSERT INTO TEMP2(ID,COL2) VALUES (11,10) INSERT INTO TEMP2(ID,COL2) VALUES (17,15) Thanks in advance!

  Read the article

• Using multiple aggregate functions in an (ANSI) SQL statement

  - by morpheous

  I have aggregate functions foo(), foobar(), fredstats(), barneystats() I want to create a domain specific query language (DSQL) above my DB, to facilitate using a domain language to query the DB. The 'language' comprises of algebraic expressions (or more specifically SQL like criteria) which I use to generate (ANSI) SQL statements which are sent to the db engine. The following lines are examples of what the language statements will look like, and hopefully, it will help further clarify the concept: **Example 1** DQL statement: foobar('yellow') between 1 and 3 and fredstats('weight') > 42 Translation: fetch all rows in an underlying table where computed values for aggregate function foobar() is between 1 and 3 AND computed value for AGG FUNC fredstats() is greater than 42 **Example 2** DQL statement: fredstats('weight') < barneystats('weight') AND foo('fighter') in (9,10,11) AND foobar('green') <> 42 Translation: Fetch all rows where the specified criteria matches **Example 3** DQL statement: foobar('green') / foobar('red') <> 42 Translation: Fetch all rows where the specified criteria matches **Example 4** DQL statement: foobar('green') - foobar('red') >= 42 Translation: Fetch all rows where the specified criteria matches Given the following information: The table upon which the queries above are being executed is called 'tbl' table 'tbl' has the following structure (id int, name varchar(32), weight float) The result set returns only the tbl.id, tbl.name and the names of the aggregate functions as columns in the result set - so for example the foobar() AGG FUNC column will be called foobar in the result set. So for example, the first DQL query will return a result set with the following columns: id, name, foobar, fredstats Given the above, my questions then are: What would be the underlying SQL required for Example1 ? What would be the underlying SQL required for Example3 ? Given an algebraic equation comprising of AGGREGATE functions, Is there a way of generalizing the algorithm needed to generate the required ANSI SQL statement(s)? I am using PostgreSQL as the db, but I would prefer to use ANSI SQL wherever possible.

  Read the article

• Convert query with system objects from SQL 2000 to 2005/2008

  - by Dan

  I have some SQL I need to get working on SQL 2005/2008. The SQL is from SQL 2000 and uses some system objects to make it work. master.dbo.spt_provider_types master.dbo.syscharsets systypes syscolumns sysobjects I know SQL 2005 does no longer use system tables and I can get the same information from views, but I am looking for a solution that will work for both SQL 2000 and 2005/2008. Any ideas? select top 100 percent TABLE_CATALOG = db_name(), TABLE_SCHEMA = user_name(o.uid), TABLE_NAME = o.name, COLUMN_NAME = c.name, ORDINAL_POSITION = convert(int, ( select count(*) from syscolumns sc where sc.id = c.id AND sc.number = c.number AND sc.colid <= c.colid )), IS_COMPUTED = convert(bit, c.iscomputed) from syscolumns c left join syscomments m on c.cdefault = m.id and m.colid = 1, sysobjects o, master.dbo.spt_provider_types d, systypes t, master.dbo.syscharsets a_cha /* charset/1001, not sortorder.*/ where o.name = @table_name and permissions(o.id, c.name) <> 0 and (o.type in ('U','V','S') OR (o.type in ('TF', 'IF') and c.number = 0)) and o.id = c.id and t.xtype = d.ss_dtype and c.length = case when d.fixlen > 0 then d.fixlen else c.length end and c.xusertype = t.xusertype and a_cha.type = 1001 /* type is charset */ and a_cha.id = isnull(convert(tinyint, CollationPropertyFromID(c.collationid, 'sqlcharset')), convert(tinyint, ServerProperty('sqlcharset'))) -- make sure there's one and only one row selected for each column order by 2, 3, c.colorder ) tbl where IS_COMPUTED = 0

  Read the article

• How to get SQL Function run a different query and return value from either query?

  - by RoguePlanetoid

  I need a function, but cannot seem to get it quite right, I have looked at examples here and elsewhere and cannot seem to get this just right, I need an optional item to be included in my query, I have this query (which works): SELECT TOP 100 PERCENT SKU, Description, LEN(CONVERT(VARCHAR (1000),Description)) AS LenDesc FROM tblItem WHERE Title = @Title AND Manufacturer = @Manufacturer ORDER BY LenDesc DESC This works within a Function, however the Manufacturer is Optional for this search - which is to find the description of a similar item, if none is present, the other query is: SELECT TOP 100 PERCENT SKU, Description, LEN(CONVERT(VARCHAR (1000),Description)) AS LenDesc FROM tblItem WHERE Title = @Title ORDER BY LenDesc DESC Which is missing the Manufacturer, how to I get my function to use either query based on the Manufacturer Value being present or not. The reason is I will have a function which first checks an SKU for a Description, if it is not present - it uses this method to get a Description from a Similar Product, then updates the product being added with the similar product's description. Here is the function so far: ALTER FUNCTION [dbo].[GetDescriptionByTitleManufacturer] ( @Title varchar(400), @Manufacturer varchar(160) ) RETURNS TABLE AS RETURN ( SELECT TOP 100 PERCENT SKU, Description, LEN(CONVERT(VARCHAR (1000),Description)) AS LenDesc FROM tblItem WHERE Title = @Title AND Manufacturer = @Manufacturer ORDER BY LenDesc DESC ) I've tried adding BEGINs and IF...ELSEs but get errors or syntax problems each way I try it, I want to be able to do something like this pseudo-function (which does not work): ALTER FUNCTION [dbo].[GetDescriptionByTitleManufacturer] ( @Title varchar(400), @Manufacturer varchar(160) ) RETURNS TABLE AS BEGIN IF (@Manufacturer = Null) RETURN ( SELECT TOP 100 PERCENT SKU, Description, LEN(CONVERT(VARCHAR (1000),Description)) AS LenDesc FROM tblItem WHERE Title = @Title ORDER BY LenDesc DESC ) ELSE RETURN ( SELECT TOP 100 PERCENT SKU, Description, LEN(CONVERT(VARCHAR (1000),Description)) AS LenDesc FROM tblItem WHERE Title = @Title AND Manufacturer = @Manufacturer ORDER BY LenDesc DESC ) END

  Read the article

• SQL Server Reset Identity Increment for all tables

  - by DanSpd

  Basically I need to reset Identity Increment for all tables to its original. Here I tried some code, but it fails. http://pastebin.com/KSyvtK5b actual code from link: USE World00_Character GO -- Create a cursor to loop through the System Ojects and get each table name DECLARE TBL_CURSOR CURSOR -- Declare the SQL Statement to cursor through FOR ( SELECT Name FROM Sysobjects WHERE Type='U' ) -- Declare the @SQL Variable which will hold our dynamic sql DECLARE @SQL NVARCHAR(MAX); SET @SQL = ''; -- Declare the @TblName Variable which will hold the name of the current table DECLARE @TblName NVARCHAR(MAX); -- Open the Cursor OPEN TBL_CURSOR -- Setup the Fetch While that will loop through our cursor and set @TblName FETCH NEXT FROM TBL_CURSOR INTO @TblName -- Do this while we are not at the end of the record set WHILE (@@FETCH_STATUS <> -1) BEGIN -- Appeand this table's select count statement to our sql variable SET @SQL = @SQL + ' ( SELECT '''+@TblName+''' AS Table_Name,COUNT(*) AS Count FROM '+@TblName+' ) UNION'; -- Delete info EXEC('DBCC CHECKIDENT ('+@TblName+',RESEED,(SELECT IDENT_SEED('+@TblName+')))'); -- Pull the next record FETCH NEXT FROM TBL_CURSOR INTO @TblName -- End the Cursor Loop END -- Close and Clean Up the Cursor CLOSE TBL_CURSOR DEALLOCATE TBL_CURSOR -- Since we were adding the UNION at the end of each part, the last query will have -- an extra UNION. Lets trim it off. SET @SQL = LEFT(@SQL,LEN(@SQL)-6); -- Lets do an Order By. You can pick between Count and Table Name by picking which -- line to execute below. SET @SQL = @SQL + ' ORDER BY Count'; --SET @SQL = @SQL + ' ORDER BY Table_Name'; -- Now that our Dynamic SQL statement is ready, lets execute it. EXEC (@SQL); GO error message: Error: Msg 102, Level 15, State 1, Line 1 Incorrect syntax near '('. How can I either fix that SQL or reset identity for all tables to its original? Thank you

  Read the article

• How to select the value of the xsi:type attribute in SQL Server?

  - by kralizek

  Considering this xml document: DECLARE @X XML (DOCUMENT search.SearchParameters) = '< parameters xmlns="http://www.educations.com/Search/Parameters.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> < parameter xsi:type="category" categoryID="38" /> < /parameters>'; I'd like to access the value of the attribute "type". According to this blog post, the xsi:type attribute is special and can't be accessed by usal keywords/functions. How can I do it? PS: I tried with WITH XMLNAMESPACES ( 'http://www.educations.com/Search/Parameters.xsd' as p, 'http://www.w3.org/2001/XMLSchema-instance' as xsi ) SELECT @X.value('(/p:parameters/p:parameter/@xsi:type)[1]','nvarchar(max)') but it didn't work.

  Read the article

• Combining aggregate functions in an (ANSI) SQL statement

  - by morpheous

  I have aggregate functions foo(), foobar(), fredstats(), barneystats() I want to create a domain specific query language (DSQL) above my DB, to facilitate using using a domain language to query the DB. The 'language' comprises of boolean expressions (or more specifically SQL like criteria) which I then 'translate' back into pure (ANSI) SQL and send to the underlying Db. The following lines are examples of what the language statements will look like, and hopefully, it will help further clarify the concept: **Example 1** DQL statement: foobar('yellow') between 1 and 3 and fredstats('weight') > 42 Translation: fetch all rows in an underlying table where computed values for aggregate function foobar() is between 1 and 3 AND computed value for AGG FUNC fredstats() is greater than 42 **Example 2** DQL statement: fredstats('weight') < barneystats('weight') AND foo('fighter') in (9,10,11) AND foobar('green') <> 42 Translation: Fetch all rows where the specified criteria matches **Example 3** DQL statement: foobar('green') / foobar('red') <> 42 Translation: Fetch all rows where the specified criteria matches **Example 4** DQL statement: foobar('green') - foobar('red') >= 42 Translation: Fetch all rows where the specified criteria matches Given the following information: The table upon which the queries above are being executed is called 'tbl' table 'tbl' has the following structure (id int, name varchar(32), weight float) The result set returns only the tbl.id, tbl.name and the names of the aggregate functions as columns in the result set - so for example the foobar() AGG FUNC column will be called foobar in the result set. So for example, the first DQL query will return a result set with the following columns: id, name, foobar, fredstats Given the above, my questions then are: What would be the underlying SQL required for Example1 ? What would be the underlying SQL required for Example3 ? Given an algebraic equation comprising of AGGREGATE functions, Is there a way of generalizing the algorithm needed to generate the required ANSI SQL statement(s)? I am using PostgreSQL as the db, but I would prefer to use ANSI SQL wherever possible.

  Read the article

• Can I select a set of Data and directly insert that into a table in SQL?

  - by VJ

  Hi I guess we cannot do this but was just curious if I could do something like - Select * from Employee where EmployeeId=1 and then use the data in the above statement and directly insert into a table with just changing the employeeid...or just this way- insert into Employee ( Select * from Employee where EmployeeId=1) its probably stupid from my side...but I just felt the need to do this a lot of times...so just was curious if there was any way to achieve it..

  Read the article

• Appropriate SQL Server Permissions for Developers

  - by BJ Safdie

  After a couple of Google searches and a quick look at questions here, I cannot seem to find what I thought would be a cookbook answer for SQL Server permissions. As I often see in small shops, most developers here were using an admin account for SQL Server while developing. I want to set up roles and permissions that I can assign to developers so that we can get our jobs done, but also do so with the minimum permissions required. Can anyone offer advice on what SQL Server permissions to assign? Components: SQL Server 2008 SQL Server Reporting Services (SSRS) 2008 SQL Server Integration Services (SSIS) 2008 Platforms: Production Staging/QA Development/Integration We are running "Mixed Mode" security because of some legacy apps and networks, but are moving to Windows Auth. I am not sure if that really affects the role set up. I plan to set up access for Developers to Prod and Staging/QA DBs as Read-Only. However, I still want developers to retain the ability to run Profiling. We need Deployment accounts with higher privilege levels. We are currently trying to figure out exactly what privileges we need for SSIS package deployments. Within the Development Server, Developers need broad privileges. However, I am not sure that just making them all admins is really the best choice. It's hard to believe that no one has published a decent example script that sets up these kinds of roles with a good set of appropriate permissions for developers and deployers. We can probably figure this all out by locking things down and then adding permissions as we discover the need, but that will be way too big a PITA for everyone. Can anyone point me to, or provide, a good exemplar for permissions for these kinds of roles on these kinds of platforms?

  Read the article

• SQL Server: What locale should be used to format numeric values into SQL Server format?

  - by Ian Boyd

  It seems that SQL Server does not accept numbers formatted using any particular locale. It also doesn't support locales that have digits other than 0-9. For example, if the current locale is bengali, then the number 123456789 would come out as "?????????". And that's just the digits, nevermind what the digit grouping would be. But the same problem happens for numbers in the Invariant locale, which formats numbers as "123,456,789", which SQL Server won't accept. Is there a culture that matches what SQL Server accepts for numeric values? Or will i have to create some custom "sql server" culture, generating rules for that culture myself from lower level formatting routines? If i was in .NET (which i'm not), i could peruse the Standard Numeric Format strings. Of the format codes available in .NET: c (Currency): $123.46 d (Decimal): 1234 e (Exponentional): 1.052033E+003 f (Fixed Point): 1234.57 g (General): 123.456 n (Number): 1,234.57 p (Percent): 100.00 % r (Round Trip): 123456789.12345678 x (Hexadecimal): FF Only 6 accept all numeric types: c (Currency): $123.46 d (Decimal): 1234 e (Exponentional): 1.052033E+003 f (Fixed Point): 1234.57 g (General): 123.456 n (Number): 1,234.57 p (Percent): 100.00 % r (Round Trip): 123456789.12345678 x (Hexadecimal): FF And of those only 2 generate string representations, in the en-US locale anyway, that would be accepted by SQL Server: c (Currency): $123.46 d (Decimal): 1234 e (Exponentional): 1.052033E+003 f (Fixed Point): 1234.57 g (General): 123.456 n (Number): 1,234.57 p (Percent): 100.00 % r (Round Trip): 123456789.12345678 x (Hexadecimal): FF Of the remaining two, fixed is dependant on the locale's digits, rather than the number being used, leaving General g format: c (Currency): $123.46 d (Decimal): 1234 e (Exponentional): 1.052033E+003 f (Fixed Point): 1234.57 g (General): 123.456 n (Number): 1,234.57 p (Percent): 100.00 % r (Round Trip): 123456789.12345678 x (Hexadecimal): FF And i can't even say for certain that the g format won't add digit groupings (e.g. 1,234). Is there a locale that formats numbers in the way SQL Server expects? Is there a .NET format code? A java format code? A Delphi format code? A VB format code? A stdio format code? latin-numeral-digits

  Read the article

• Stack trace for C++ using gcc

  - by dimba

  We use stack traces in proprietary assert like macro to catch developer mistakes - when error is caught, stack trace is printed. I find gcc's pair backtrace()/backtrace_symbols() methods insufficient: Names are mangled No line information 1st problem can be resolved by abi::__cxa_demangle. However 2nd problem s more tough. I found replacement for backtrace_symbols(). This is better than gcc's backtrace_symbols(), since it can retrieve line numbers (if compiled with -g) and you don't need to compile with -rdynamic. Hoverer the code is GNU licenced, so IMHO I can't use it in commercial code. Any proposals?

  Read the article

• SQL Server 2000: Why is this query w/ variables so slow vs w/o variables?

  - by William DiStefano

  I can't figure out why this query would be so slow with variables versus without them. I read some where that I need to enable "Dynamic Parameters" but I cannot find where to do this. DECLARE @BeginDate AS DATETIME ,@EndDate AS DATETIME SELECT @BeginDate = '2010-05-20' ,@EndDate = '2010-05-25' -- Fix date range to include time values SET @BeginDate = CONVERT(VARCHAR(10), ISNULL(@BeginDate, '01/01/1990'), 101) + ' 00:00' SET @EndDate = CONVERT(VARCHAR(10), ISNULL(@EndDate, '12/31/2099'), 101) + ' 23:59' SELECT * FROM claim c WHERE (c.Received_Date BETWEEN @BeginDate AND @EndDate) --this is much slower --(c.Received_Date BETWEEN '2010-05-20' AND '2010-05-25') --this is much faster

  Read the article

• How many records can i store in a Sql server table before it's getting ugly?

  - by Michel

  Hi, i've been asked to do some performance tests for a new system. It is only just running with a few client, but as they expect to grow, these are the numbers i work with for my test: 200 clients, 4 years of data, and the data changes per.... 5 minutes. So for every 5 minutes for every client there is 1 record. That means 365*24*12 = 105.000 records per client per year, that means 80 milion records for my test. It has one FK to another table, one PK (uniqueidentifier) and one index on the clientID. Is this something SqlServer laughs about because it isn't scaring him, is this getting too much for one quad core 8 GB machine, is this on the edge, or..... Has anybody had any experience with these kind of numbers?

  Read the article

• Sql Server Compact Edition version error.

  - by Tim

  I am working on .NET ClickOnce project that uses Sql Server 2005 Compact Edition to synchronize remote data through the use of a Merge replication. This application has been live for nearly a year now, and while we encounter occasional synchronization errors, things run quite smoothly for the most part. Yesterday a user reported an error that I have never seen before and have yet to find any information for online. Many users synchronize every night, and I haven't received error reports from anyone else, so this issue must be isolated to this particular user / client machine. Here are the full details of the error: -Error Code : 80004005 -Message : The message contains an unexpected replication operation code. The version of SQL Server Compact Edition Client Agent and SQL Server Compact Edition Server Agent should match. [ replication operation code = 31 ] -Minor Error : 28526 -Source : Microsoft SQL Server Compact Edition -Numeric Parameters : 31 One interesting thing that I've found is that his data does get synchronized to the server, so this error must occur after the upload completes. I have yet to determine whether or not changes at the server are still being downloaded to his subscription. Thinking that maybe there was some kind of version conflict going on, I had a remote desktop session with this user last night and uninstalled both the application and the SQL Server Compact Edition prerequisite, then reinstalled both from our ClickOnce publication site. I also removed his existing local database file so that upon synchronization, an entirely new subscription would be issued to him. Still his errors continue. I suppose the error may be somewhat general, and the text in the error message stating that the versions should match may not necessarily reflect the problem at hand. This site contains the only official reference to this error that I've been able to find, and it offers no more detail than the error message itself. Has anyone else encountered this error? Or at least know more about SQL Compact to have a better guess as to what is going on here? Any help / suggestions will be greatly appreciated!

  Read the article

• how can I insert value into a table in sql server 2000 , 2005, 2008?

  - by ricky roy

  I have a table having a single auto Auto Incremented column. How Can i insert the value. Using Insert into table or some other way Thanks Waiting for your replay..

  Read the article

• sql - How do I enforce a two-column constraint?

  - by hamlin11

  I have a CustomerID column and an EffectiveDate column in a table. I need the combination of these two to be unique. However, I already have a primary key on an auto-numbered integer column. What is a good way to accomplish my goal? Thanks

  Read the article

• How to use traceit to report function input variables in stack trace

  - by reckoner

  Hi, I've been using the following code to trace the execution of my programs: import sys import linecache import random def traceit(frame, event, arg): if event == "line": lineno = frame.f_lineno filename = frame.f_globals["__file__"] if filename == "<stdin>": filename = "traceit.py" if (filename.endswith(".pyc") or filename.endswith(".pyo")): filename = filename[:-1] name = frame.f_globals["__name__"] line = linecache.getline(filename, lineno) print "%s:%s:%s: %s" % (name, lineno,frame.f_code.co_name , line.rstrip()) return traceit def main(): print "In main" for i in range(5): print i, random.randrange(0, 10) print "Done." sys.settrace(traceit) main() Using this code, or something like it, is it possible to report the values of certain function arguments? In other words, the above code tells me "which" functions were called and I would like to know "what" the corresponding values of the input variables for those function calls. Thanks in advance.

  Read the article

• How to enable BDS2006's C++ WARN & TRACE macros.

  - by Psychic

  I am trying to find out how to enable (& use) Borland's WARN & TRACE macros. My starting point was this link: http://bcbjournal.org/articles/vol2/9809/Debugging_with_diagnostic_macros.htm?PHPSESSID=37bf58851bfeb5c199d1af31d7b2e7ff However, that appears to be for BCB5, and not the 2006 Borland Developer Studio. I've set the two defines (__WARN & __TRACE) I've included the .h file () I've added some macros, and everything compiles & links fine. But when I run the application (in DEBUG mode), no debug output file is created. What am I missing here?

  Read the article

• Authentication Problem in Silverlight - Cannot connect to SQL Server

  - by Johann

  Hi All, At the moment, when I try to register a user using the default Business Template in Silverlight, I am getting an error. Basically I am following a tutorial found on Channel 9 on how to build a business app with Silverlight. "An error has occurred while establishing a connection to the server. (provider: Named Pipes Provider, error: 40 – Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 5) An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 – Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 1326)". I found a blog where it identifies the problem, and followed every step, however I am still getting the same problems. Here is my connection string:- <add name="SIEventManagerEntities" connectionString="metadata=res://*/EventManagerDBModel.csdl|res://*/EventManagerDBModel.ssdl|res://*/EventManagerDBModel.msl;provider=System.Data.SqlClient;provider connection string=&quot;Data Source=MONFU-PC;Initial Catalog=SIEventManager;Integrated Security=SSPI;MultipleActiveResultSets=True&quot;" providerName="System.Data.EntityClient" /> Any help would really be very much appreciated! Thanks

  Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >