Search Results

Search found 10201 results on 409 pages for 'virtual desktops'.

Page 74/409 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

  • network routing between mac & virtual XP

    - by Kevin
    Hi - I have a max laptop running XP inside VirtualBox. The network is setup to be a "Bridged Adapter" so that the IPs for both the host & guest OS's are assigned by my wireless routed. My guest XP has Nortel VPN connecting to corporate lan. When this is connected, I want to allow my host Mac OS to access the corporate network. But I'm struggling. Without Nortel VPN running, I can change routing on the mac so all traffic is sent via the guest XP - this works. But once I activate the VPN, this no longer works. If I try to change the routing on mac to run through the IP address assigned to the Nortel adapter, I get a "Network is unreachable" error. Below is the output from ipconfig /all on the guest XP OS. I'm beginning to believe that what I want to do is not possible because of the way Nortel secure the VPN - but before I give up I thought I'd post the problem here. Thanks, Kevin z:\eclipseworkspace\RESMobileSuite\trunk>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : zzzz-3177b42dd0 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : zzzz.zzz Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : AMD PCNET Family PCI Ethernet Adapter Physical Address. . . . . . . . . : 08-00-XX-XX-XX-XX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 Lease Obtained. . . . . . . . . . : 30 April 2010 12:22:02 Lease Expires . . . . . . . . . . : 01 May 2010 12:22:02 Ethernet adapter {8EB7A442-9683-45FB-A602-56110A4B3434}: Connection-specific DNS Suffix . : zzzz.zz Description . . . . . . . . . . . : Nortel IPSECSHM Adapter - Packet Scheduler Miniport Physical Address. . . . . . . . . : 44-45-YY-YY-YY-YY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : XXX.4.52.62 Subnet Mask . . . . . . . . . . . : 255.255.254.0 Default Gateway . . . . . . . . . : XXX.4.52.62 DNS Servers . . . . . . . . . . . : XXX.6.21.36 XXX.6.21.100

    Read the article

  • Setting up local virtual host

    - by Webnet
    I'm trying to setup a local working copy of my domain and I've modified the "domain" file within /etc/apache2/sites-available/, executed "sudo a2ensite domain" and then restarted apache and my browser is not looking locally for the domain. What step am I missing? NameVirtualHost domain:80 <VirtualHost domain:80> ServerName domain DocumentRoot /var/www/domain.com/ </VirtualHost>

    Read the article

  • bond0:0 + define virtual IP

    - by yael
    hi all in my linux server I have the follwoing: Linux Version - RedHat-Linux- 5.3.0.0 (this linux server only only one LAN) more /etc/sysconfig/network-scripts/ifcfg-bond0:0 DEVICE=bond0:0 ONBOOT=yes BOOTPROTO=static IPADDR=10.10.10.12 NETMASK=255.255.255.0 ifconfig -a bond0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) bond0:0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:10.10.10.12 Bcast:1.1.1.255 Mask:255.255.255.0 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 eth0 Link encap:Ethernet HWaddr 00:0E:0C:C7:F8:92 inet addr:1.1.1.1 Bcast:1.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::20e:cff:fec7:f892/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:8600 errors:0 dropped:0 overruns:0 frame:0 TX packets:4764 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:717979 (701.1 KiB) TX bytes:598620 (584.5 KiB) Memory:b8820000-b8840000 my problems: why I get HWaddr 00:00:00:00:00:00 and not the real MAC address I cant ping to other server with 10.10.10.11 from my server is it posible to define bond0:0 when I have only one LAN (eth0) other info: more /etc/modprobe.conf alias eth0 e1000e alias eth1 e1000e alias eth2 e1000e alias eth3 e1000e alias scsi_hostadapter mptbase alias scsi_hostadapter1 mptsas alias scsi_hostadapter2 ata_piix alias bond0 bonding alias bond1 bonding

    Read the article

  • bond0:0 + define virtual IP

    - by yael
    hi all in my linux server I have the follwoing: Linux Version - RedHat-Linux- 5.3.0.0 (this linux server only only one LAN) more /etc/sysconfig/network-scripts/ifcfg-bond0:0 DEVICE=bond0:0 ONBOOT=yes BOOTPROTO=static IPADDR=10.10.10.12 NETMASK=255.255.255.0 ifconfig -a bond0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) bond0:0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:10.10.10.12 Bcast:1.1.1.255 Mask:255.255.255.0 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 eth0 Link encap:Ethernet HWaddr 00:0E:0C:C7:F8:92 inet addr:1.1.1.1 Bcast:1.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::20e:cff:fec7:f892/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:8600 errors:0 dropped:0 overruns:0 frame:0 TX packets:4764 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:717979 (701.1 KiB) TX bytes:598620 (584.5 KiB) Memory:b8820000-b8840000 my problems: why I get HWaddr 00:00:00:00:00:00 and not the real MAC address I cant ping to other server with 10.10.10.11 from my server is it posible to define bond0:0 when I have only one LAN (eth0) other info: more /etc/modprobe.conf alias eth0 e1000e alias eth1 e1000e alias eth2 e1000e alias eth3 e1000e alias scsi_hostadapter mptbase alias scsi_hostadapter1 mptsas alias scsi_hostadapter2 ata_piix alias bond0 bonding alias bond1 bonding

    Read the article

  • Rails /tmp/cache/assets permissions issue using Debian virtual machine hosted on OS X Lion

    - by Jim
    I am running Parallels Desktop 7 on OS X Lion. I have a VM with Debian installed, and inside that VM I setup a Rails development environment. I am using Parallels Tools to share out my OS X home directory to the VM - the goal here is to run the Rails server on the VM, but host the files on OS X (so they are automatically backed up, and so I can use tools like Textmate to develop with). Everything seems to work with the shared directory - my Debian user can read, write, and execute files. However, when I cloned a recent Rails project from Git, I got an error message when it tried to compile the CSS assets. My symptoms are exactly the same as in the question: http://stackoverflow.com/questions/7556774/rails-sprocket-error-compiling-css-assest-chown-issue I believe this is permissions-based, but it is really weird. My entire Rails project directory has permissions set to 777 and my Debian user owns it. If I navigate into /tmp/cache/assets, those permissions are the same. However, the three-character directories Rails is creating (DCE, DA1, D05, etc...) are being created without write permissions! If I refresh the Rails page a few times, about 4 or 5 (with Rails creating new three-character directories every time), eventually it will create one of the directories with the proper 777 permissions and everything will work! This will persist until I make a change to the CSS files and it has to recompile. Does anyone have any idea what might be going on here? I can't fathom why it is creating temp directories with incorrect permissions, or why after a few refreshes the good permissions kick in and it works... It definitely seems to be an issue with the share, since if I move the project into a different directory on the VM, it seems to work fine. On the OS X side, I've given the shared folder 777 permissions as well, but no dice...any ideas? Update I've found that the number of times I need to refresh before it works is not random - it has to do with how many assets are being compiled. For example, if I edit one of my CSS files, and there are four CSS files in the app/assets/stylesheets directory, I have to refresh four times before the app will finally work without the operation not permitted error...

    Read the article

  • Move/migrate vbox virtual machine to another computer along with snapshots

    - by user53864
    I have sun virtualbox(2.2) installed on windows xp and I've some VMs(ubuntu server) running with many snapshots . How do I move virtualbox VDIs along with all the snapshots to new windows system?. I tried copying the base vdi and creating it newly on a new system and it worked fine but could not move the snapshots of the vms. I even tried copying Virtualbox.xml and machine's xml file to the new system and manually editing the snapshots location to the new place in the virtualbox.xml file, the snapshots are listed in the snapshots tab(but when I checked snapshots location in the vm's settings it's showing the default location having edited it) but when I try to use the snapshots, reverting to current, it's not booting(some snapshots giving grub 2 error, some got stalled at the boot). I also tried export and import but only current state I could export and use it on the new system with no snapshots. Is there any way I could achieve this?. Please need help...

    Read the article

  • nginx virtual hosts are not working, all vhosts goes to the default one

    - by Adirael
    Hello, I just did a clean install of nginx + php-fpm on a VPS running Ubuntu 10.10, nginx is serving and PHP is working fine, but I'm not able to add vhosts to it. Well, I can add them, but only one works, the rest go to this first one. This is my first vhost, for host1: server { listen 80; server_name host1; access_log /var/log/nginx/host1.log; error_log /var/log/nginx/host1.error.log; location / { root /var/www/vhosts/host1/; index index.html index.htm index.php; } location ~ \.php$ { include /etc/nginx/fastcgi_params; #fastcgi_pass 127.0.0.1:9000; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_param SCRIPT_FILENAME /var/www/vhosts/host1/$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_index index.php; } } And the second one, for host2: server { listen 80; server_name host2; access_log /var/log/nginx/host2.log; error_log /var/log/nginx/host2.error.log; location / { root /var/www/vhosts/host2/; index index.html index.htm index.php; } location ~ \.php$ { include /etc/nginx/fastcgi_params; #fastcgi_pass 127.0.0.1:9000; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_param SCRIPT_FILENAME /var/www/vhosts/host2/$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_index index.php; } } The problem is, when I go to http://host1 everything is fine, but on http://host2, it just shows host1! I don't have Apache installed and everything comes from repos. Any pointers?

    Read the article

  • Conflicting ip routes with local table on attaching a virtual network interface

    - by user1071840
    I have an EC2 instance with these ip rules: $ sudo ip rule show 0: from all lookup local 32766: from all lookup main 32767: from all lookup default I can attach an elastic network interface to it with a private IP. Say the IP of my machine is 10.1.3.12 and the IP of the interface is 10.1.1.190. As soon as I attach the interface to my machine a new entry is added to the routing policy and local routing table: sudo ip rule show 0: from all lookup local 32765: from 10.1.1.190 lookup 10003 32766: from all lookup main 32767: from all lookup default $ sudo ip route show table local broadcast 10.1.1.0 dev eth3 proto kernel scope link src 10.1.1.190 local 10.1.1.190 dev eth3 proto kernel scope host src 10.1.1.190 broadcast 10.1.1.255 dev eth3 proto kernel scope link src 10.1.1.190 broadcast 10.1.3.0 dev eth0 proto kernel scope link src 10.1.3.12 local 10.1.3.12 dev eth0 proto kernel scope host src 10.1.3.12 broadcast 10.1.3.255 dev eth0 proto kernel scope link src 10.1.3.12 broadcast 127.0.0.0 dev lo proto kernel scope link src 127.0.0.1 local 127.0.0.0/8 dev lo proto kernel scope host src 127.0.0.1 local 127.0.0.1 dev lo proto kernel scope host src 127.0.0.1 broadcast 127.255.255.255 dev lo proto kernel scope link src 127.0.0.1 I can send traffic to this ENI directly from a host that can have the same IP as the host the ENI is attached to. This is where the problem starts. I ran tcpdump on the port in question and saw multiple SYNs going to the ENI with src '10.1.3.12' and destination '10.1.1.190' but didn't see even a single ACK. In my understanding if ACKs were being sent from the ENI they'd have destination as 10.1.3.12 i.e. the same as the local machine's IP and such packets will now be routed as local packets matching local routing policy: local 10.1.3.12 dev eth0 proto kernel scope host src 10.1.3.12 I'd like to send all the packets originating from 10.1.1.190 (my ENI) to go back on the same interface i.e. eth3 in this case. Contents of the nee table 10003 are: $ sudo ip route show table 10003 default via 10.1.1.1 dev eth3 I think I can do the following: I don't know if its possible but probably decrease the priority of local table so the packets match the table 10003. Use iptables to mangle these packets and update the local table route to include the mark information But I'm not sure if these are the right approaches.

    Read the article

  • Problems bringing up a second virtual network interface

    - by tubaguy50035
    I'm having issues adding a second IP address to one interface. Below is my /etc/networking/interfaces # The loopback network interface auto lo iface lo inet loopback #eth0 is our main IP address auto eth0 iface eth0 inet static address 198.58.103.* netmask 255.255.255.0 gateway 198.58.103.1 #eth0:0 is our private address auto eth0:0 iface eth0:0 inet static address 192.168.129.134 netmask 255.255.128.0 #eth0:1 is for www.site.com auto eth0:1 iface eth0:1 inet static address 198.58.104.* netmask 255.255.255.0 gateway 198.58.104.1 When I run /etc/init.d/networking restart, I get a fail error about bringing up eth0:1: RTNETLINK answers: File exists Failed to bring up eth0:1. Any reason this would be? I didn't have any problems with I first set up eth0 and eth0:0.

    Read the article

  • bond0:0 + define virtual IP

    - by yael
    in my Linux server I have the following: Linux Version - RedHat-Linux- 5.3.0.0 (this Linux server only only one LAN) more /etc/sysconfig/network-scripts/ifcfg-bond0:0 DEVICE=bond0:0 ONBOOT=yes BOOTPROTO=static IPADDR=10.10.10.12 NETMASK=255.255.255.0 ifconfig -a bond0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) bond0:0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:10.10.10.12 Bcast:1.1.1.255 Mask:255.255.255.0 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 eth0 Link encap:Ethernet HWaddr 00:0E:0C:C7:F8:92 inet addr:1.1.1.1 Bcast:1.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::20e:cff:fec7:f892/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:8600 errors:0 dropped:0 overruns:0 frame:0 TX packets:4764 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:717979 (701.1 KiB) TX bytes:598620 (584.5 KiB) Memory:b8820000-b8840000 my problems: why I get HWaddr 00:00:00:00:00:00 and not the real MAC address I cant ping to other server with 10.10.10.11 from my server is it possible to define bond0:0 when I have only one LAN (eth0) other info: more /etc/modprobe.conf alias eth0 e1000e alias eth1 e1000e alias eth2 e1000e alias eth3 e1000e alias scsi_hostadapter mptbase alias scsi_hostadapter1 mptsas alias scsi_hostadapter2 ata_piix alias bond0 bonding alias bond1 bonding

    Read the article

  • Troubles doing transparent proxy for virtual machines

    - by Dan H
    Hi iptables gurus. First here is the basic topology: Internet | Gateway | Workstation---eth0---virbr0 | +-----+-----+ | | | vm1 vm2 vm3 I need to test a traffic analyzer running on my workstation, listening on some port (say 8990) on eth0. The rule [I think] I want is "any packets leaving virbr0 going anywhere to port 80 must instead go to port 8990 on eth0". My software running on port 8990 does its own check of the NAT packet mangling to push the packets through after it inspects them. I've been banging my head on this, with different variants of: iptables -t nat -A PREROUTING -i virbr0 -p tcp --dport 80 -j DNAT \ --to 10.0.0.10:8990 And I've tried the more generic method of using the mangle table with --set-mark and ip rule add fwmark, but I'm not getting it. I guess what's confusing me is that everything runs on the same box. Thanks for any guidance.

    Read the article

  • Ubuntu 9.10 Virtual Machine does not respond on VMWare Fusion

    - by mgpyone
    I've just installed Ubuntu 9.10 Edition on my VMWare Fusion. host is Mac. I've installed successfully and able to use . Then, I've shut down and reopen again. Then, it's no longer response. like that I've check Setting. it shows that running. I've waited for long time but no response yet. Any idea better then reinstalling again ?

    Read the article

  • Which hardware to VM ratio for Build-Server virtualization?

    - by Martin
    Let's start with saying that I'm a total noob wrt. to server virtualization. That is, I use VMs often during development, but they're simple desktop machine things for me. Now to my problem: We have two (physical) build servers, one master, one slave running Jenkins to do daily tasks and build (Visual C++ Builds) our release packages for our software. As such these machines are critical to our company, because we do lot's releases and without a controlled environment to create them, we can't ship fixes. (And currently there's no proper backup of these machines in place, because they do not hold any data as such - it just would be a major pain to setup them again should they go bust. (But setting up backup that I'd know would work in case of HW failure would even be more pain, so we have skipped that until now.)) Therefore (and for scaling purposes) we would like to go virtual with these machines. Outsourcing to the cloud is not an option, not at all, so we'll have to use on-premises hardware and VM hosts. Each Build-Server (master or slave) is a fully configured (installs, licenses, shares in case of the master, ...) Windows Server box. I would now ideally like to just convert the (two) existing physical nodes to VM images and run them. Later add more VM slave instances as clones of the existing ones. And here begin my questions: Should I go for one VM per one hardware-box or should I go for something where a single hardware runs multiple VMs? That would mean a single point of failure hardware wise and doesn't seem like a good idea ... or?? Since we're doing C++ compilation with Visual Studio, I assume that during a build the hardware (processor cores + disk) will be fully utilized, so going with more than one build-node per hardware doesn't seem to make much sense?? Wrt. to hardware options, does it make any difference which VM software we use (VMWare, MS, Virtualbox, ... ?) (We're using Windows exclusively for our builds.) Regarding budget: We have a normal small company (20 developers) budget for this. ;-) That is, if it's going to cost a few k$ it's going to cost. If it's free - the better. I strongly prefer solutions where there's no multi-k$ maintenance costs per year.

    Read the article

  • Apache Virtual host Subdomains points to same directory

    - by Jakobud
    I have setup subdomains using Apache before and have never really ran into any big problems. But with this (I believe Centos) server that is one of my clients, I'm not understanding what I'm doing wrong. Here is the .conf that apache is loading: Listen 80 NameVirtualHost *:80 <VirtualHost *:80> ServerName www.thedomain.com DocumentRoot /u1/thedomain.com/public RailsEnv production </VirtualHost> <VirtualHost *:80> ServerName subdomain.thedomain.com DocumentRoot /u1/subdomain.thedomain.com/public_html </VirtualHost> When I access either the primary or subdomain addresses, they both point to the primary www.thedomain.com content. Any thoughts? UPDATE: Yes I did a configtest and graceful after making the changes.

    Read the article

  • Recover a Parallel Desktop 3 virtual machine in VirtualBox

    - by gregseth
    I have an old HDD image file that was used with Parallels Desktop 3. Ideally I'd like to use it in VirtualBox (conversion). In all the tutorials I found (like this one or that one) the VM must be started: there's the problem. I don't have the machine where Parallel 3 was installed anymore. I tried installing the trial version of the last version of Parallels (9) but it seem it doesn't offer the possibility to import an old VM. So here's the question: Given I can't boot the VM with Parallels Desktop, is there a way to convert the image file to another format that is bootable in VirtualBox? If it changes anything, the host is MacOS X 10.9, the guest is Windows XP.

    Read the article

  • virtual hosts on lighttpd can't load

    - by Jake
    Thats what I did: Added following code to lighttpd.conf $HTTP["host"] =~ "(^|\.)test\.com$" { server.document-root = "/home/test" } created /home/test Restarted Lighttpd but it doesn't load anything Google chrome Error: No data received Unable to load the webpage because the server sent no data. Here are some suggestions: Reload this webpage later. Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data. Firefox: The connection was reset The connection to the server was reset while the page was loading. The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web. can you please explain How can I fix this? Really Thanks

    Read the article

  • C# SMTP virtual server doesn't send mail [closed]

    - by ragaei
    I have got the following Exception : System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. - System.Runtime.InteropServices.COMException (0x8004020F): The server rejected one or more recipient addresses. The server response was: 550 5.7.1 Unable to relay for [email protected] --- End of inner exception stack trace --- at System.RuntimeType.InvokeDispMethod(String name, BindingFlags invokeAttr, Object target, Object[] args, Boolean[] byrefModifiers, Int32 culture, String[] namedParameters) at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams) at System.Type.InvokeMember(String name, BindingFlags, invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture) at System.Web.Mail.SmtpMail.LateBoundAccessHelper.CallMethod(Type type, Object obj, String methodName, Object[] args) at System.Web.Mail.SmtpMail.LateBoundAccessHelper.CallMethod(Object obj, String methodName, Object[] args) public static void SendEmail(string _FromEmail, string _ToEmail, string _Subject, string _EmailBody) { // setup email header . SmtpMail.SmtpServer = "127.0.0.1"; MailMessage _MailMessage = new MailMessage(); _MailMessage.From = _FromEmail; _MailMessage.To = _ToEmail; _MailMessage.Subject = _Subject; _MailMessage.Body = _EmailBody; try { SmtpMail.Send(_MailMessage); } catch (Exception ex) { if (ex.InnerException != null) { String str = ex.InnerException.ToString(); } } }

    Read the article

  • Apache Virtual Host Issue

    - by Nik
    I think I hate Apache now, but on with the issue. It might be a configuration error on my end or just my inability to see what's right in front of me, but I'm trying to configure a sub-domain in Apache and no matter what, it always redirects the sub-domain to the web root of the main domain. My configuration is posted below (and yes, the domain name information was purposefully modified): <VirtualHost *> DocumentRoot /var/www/root/ ServerName example.com <Directory /var/www/root/> allow from all Options +Indexes </Directory> </VirtualHost> <Directory /usr/share/squirrelmail> Options Indexes FollowSymLinks <IfModule mod_php5.c> php_flag register_globals off </IfModule> <IfModule mod_dir.c> DirectoryIndex index.php </IfModule> # access to configtest is limited by default to prevent information leak <Files configtest.php> order deny,allow deny from all allow from 127.0.0.1 </Files> </Directory> # users will prefer a simple URL like http://webmail.example.com <VirtualHost *> DocumentRoot /usr/share/squirrelmail/ ServerName squirrelmail.example.com </VirtualHost>

    Read the article

  • Mixed IP and Name Based Virtual Hosts with nginx

    - by nerkn
    I set up many domains but I dont know how to configure if only ip address is given. say foo.com I have a setup to go web/foo.com/htdocs, I want to 88.99.66.55 ip address like a domain to web/fook.com/htdocs server { listen 80; server_name 85.99.66.55; location / { root /home/web/fook.com/htdocs; } location ~ \.(php|php3|php4|php5)$ { root /home/web/fook.com/htdocs; include fastcgi_params; fastcgi_pass 127.0.0.1:9000; } } resulted [warn]: conflicting server name "85.105.65.219" on 0.0.0.0:80, ignored

    Read the article

  • Separated virtual networks with same subnet range with 2 interface

    - by Coolpet
    I'm having some problems with routing with the following: I have a server with 2 interfaces. It has 1-1 alias contains the same subnet. the 2 interface is connected to 2 switch, which are separated from each other. Infrastructure: Eth0 192.168.16.2/20 Eth0:eth0 192.168.1.222/20 Eth1 192.168.32.3/20 Eth1:eth1 192.168.1.223/20 I have a PC which has the IP address: 192.168.1.3/24 The problem is the next: If PC is on subnet 1, I can ping it. If PC is on subnet 2, I can't ping it. traceroute shows the route is across 192.168.1.222 ping -I 192.168.1.223 192.168.1.3 is not working on subnet 2. arp entries show the MAC address belonging to the correct interface (eth1 on subnet 2) How can I force the server to look on both interface same ranged subnet for specific IP? It searches only in the first subnet. The routing table has these 2 entries: 192.168.0.0/20 dev eth0 proto kernel scope link src 192.168.1.222 192.168.0.0/20 dev eth1 proto kernel scope link src 192.168.1.223

    Read the article

  • Connect to vmware virtual machine via network

    - by Arnis L.
    I want to connect to my vmware vm from home. To work network i'm connecting through VPN. VM sits on one of the workstations (can connect to it through RDC). Any tips how to do that? What software do i need (got VMWare workstation atm)? p.s. i'm quite a newbie at this.

    Read the article

  • Virtual bridge/switch for Windows server&client?

    - by Tiberiu-Ionu? Stan
    I can't find a very simple application, with litle to zero configuration on both client and server side which would help one computer to bring other computers on an existing private LAN. OpenVPN seems like an overkill for this type of thing, and is really hard to get running or debug by various clueless people trying to connect. Does such a software exist? It's very odd not to. THe Windows provided VPN (PPTP over TCP and GRE) is not what I'm looking for because it is often filtered by ISPs. Only TCP and UDP solutions pls. Encryption is not needed.

    Read the article

  • Virtual Subdomains

    - by Dave P
    I would like to manage subdomains exclusively through .htaccess. I am able to catch subdomains that I set up - for example, support.testsite.com - currently, I redirect that to testsite.com/support. What I would like to do is retain the subdomain, even after the redirect - so support.testsite.com seems to stay in the address bar for the user, even though it is actually located at testsite.com/support. Should I maintain another .htaccess file in /support that rewrites the address? Thanks!

    Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >