Search Results

Search found 2745 results on 110 pages for 'waiting'.

Page 74/110 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

• EMC VNX iSCSI setup - unsure about SP/port assignment

  - by pauska

  We have a new VNX5300 waiting to get configured, and I need to plan out the network infrastructure before the EMC tech arrives. It has 4x1gbit iSCSI per SP (8 ports in total), and I'd like to get the most out of the performance until we jump over to 10gig iSCSI. From what I can read from the docs - the recommendation is to use only two ports per SP, with 1 active and 1 passive. Why is this? It seems kind of pointless to have quad-port i/o-modules and then recommend to not use more than two of them? Also - I'm a bit unsure about the zoning. The best practices guide state that you should separate each port on each SP from each other on different logical networks. Does this mean that I have to create 4 logical networks to be able to use all 8 ports? It also gives the following example: Does this mean that A0 and B0 should sit on the same physical switch aswell? Won't this make all traffic go on one switch (if both A1 and B1 are passive)? Edit: Another brainpuzzle I don't get it - each host (as in server) should not have more iSCSI bandwidth available than the storage processor. What on earth does this matter? If serverA have 1gbit and serverB have 100mbit, then the resulting bandwith between them is 100mbit. How can this result in some kind of oversubscription? Edit4: Wait, what. Active and passive ports? The VNX runs in a ALUA configuration with asymmetrical active/active.. there shouldn't be any passive ports, only preferred ones..

  Read the article

• python mysqldb - mysql server gone away - can't reconnect

  - by david.barkhuizen

  When attempting to import a bunch of data into mysql tables using python and mysqldb, I run into the following error '2006 - mySQL Server has gone away', and then I am unable to reconnect again within the script. I am iniitially re-using a connection object across transactions ( delineated by conn.commit() ), then when I first encounter this exception, if I create a new connection by calling MySQLdb.connect(), this new connection also fails with the same exception. This error does not occur immediately, I can pump a fair amount of data into the db, but then faithfully occurs after I have inserted a couple thousand records, so roughly once the db has committed a certain transaction volume, it always falls over like this. If I rerun the script, WITHOUT restarting the db server. then it resumes where it left off, pumps in some data, then falls over again. Before recommendations to change time-out timings, does anyone know why I am not able to establish a new connection after the initial failure ? - Even if I try a couple of times waiting a couple of seconds between each. (btw, I'm running Windows 7, mysql server 5.1.48, mysqldb 1.2.3.gamma.1, python 2.6)

  Read the article

• Running python script in incrontab in Debian

  - by WilliamMayor

  I have a user, dropbox, that runs the Dropbox daemon, I want to monitor the directories in the Dropbox directory for new files and run a python script when they appear. I have the python script that I know works: $ /home/dropbox/monitor.py Trying to get lock Got lock, waiting for Dropbox to be idle Dropbox idle Finding instructions Done, releasing lock I have an incrontab entry: $ incrontab -l /home/dropbox/Dropbox IN_CREATE /home/dropbox/monitor.py | logger /home/dropbox/test IN_CREATE logger "$$ $@ $# $% $&" When I add a file to the test directory I see the output in /var/log/syslog: $ touch /home/dropbox/test/a $ tail /var/log/syslog ... Nov 9 10:18:27 vps incrond[1354]: (dropbox) CMD (logger "$ /home/dropbox/test a IN_CREATE 256") Nov 9 10:18:27 vps logger: "$ /home/dropbox/test a IN_CREATE 256" ... However, when I add a file to the Dropbox directory the command doesn't seem to run: $ touch /home/dropbox/Dropbox/a $ tail /var/log/syslog ... Nov 9 10:24:16 vps incrond[1354]: (dropbox) CMD (/home/dropbox/monitor.py | logger) ... So the incron daemon notices the new file and the correct command is found to be executed but it never actually gets executed. Nor are there any error messages. It kind of seems like incrontab can only be used to run the most simple of commands. This might be a similar question to: Incrond running but not executing commands CentOS 6.4 but I think that I don't have env problems, every path is absolute. I tried changing .../monitor.py to /usr/bin/python2.7 .../monitor.py just in case but it didn't make any difference.

  Read the article

• FreeBSD's ng_nat stopping pass the packets periodically

  - by Korjavin Ivan

  I have FreeBSD router: #uname 9.1-STABLE FreeBSD 9.1-STABLE #0: Fri Jan 18 16:20:47 YEKT 2013 It's a powerful computer with a lot of memory #top -S last pid: 45076; load averages: 1.54, 1.46, 1.29 up 0+21:13:28 19:23:46 84 processes: 2 running, 81 sleeping, 1 waiting CPU: 3.1% user, 0.0% nice, 32.1% system, 5.3% interrupt, 59.5% idle Mem: 390M Active, 1441M Inact, 785M Wired, 799M Buf, 5008M Free Swap: 8192M Total, 8192M Free PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 11 root 4 155 ki31 0K 64K RUN 3 71.4H 254.83% idle 13 root 4 -16 - 0K 64K sleep 0 101:52 103.03% ng_queue 0 root 14 -92 0 0K 224K - 2 229:44 16.55% kernel 12 root 17 -84 - 0K 272K WAIT 0 213:32 15.67% intr 40228 root 1 22 0 51060K 25084K select 0 20:27 1.66% snmpd 15052 root 1 52 0 104M 22204K select 2 4:36 0.98% mpd5 19 root 1 16 - 0K 16K syncer 1 0:48 0.20% syncer Its tasks are: NAT via ng_nat and PPPoE server via mpd5. Traffic through - about 300Mbit/s, about 40kpps at peak. Pppoe sessions created - 350 max. ng_nat is configured by by the script: /usr/sbin/ngctl -f- <<-EOF mkpeer ipfw: nat %s out name ipfw:%s %s connect ipfw: %s: %s in msg %s: setaliasaddr 1.1.%s There are 20 such ng_nat nodes, with about 150 clients. Sometimes, the traffic via nat stops. When this happens vmstat reports a lot of FAIL counts vmstat -z | grep -i netgraph ITEM SIZE LIMIT USED FREE REQ FAIL SLEEP NetGraph items: 72, 10266, 1, 376,39178965, 0, 0 NetGraph data items: 72, 10266, 9, 10257,2327948820,2131611,4033 I was tried increase net.graph.maxdata=10240 net.graph.maxalloc=10240 but this doesn't work. It's a new problem (1-2 week). The configuration had been working well for about 5 months and no configuration changes were made leading up to the problems starting. In the last few weeks we have slightly increased traffic (from 270 to 300 mbits) and little more pppoe sessions (300-350). Help me please, how to find and solve my problem?

  Read the article

• How can I safely close this window and forever avoid seeing similar pop-ups from Mackeeper Zeobit's malware and spyware?

  - by Michael Prescott

  The attached image shows a window that just popped up and the only button available is the OK button. I could Force quit Safari, but I've got several sites open right now and don't want to try and find my place again. Besides, I've seen similar hacks in the past and I'd like to learn how to handle them in a way better than just a brute force-quit. I've never heard of MacKeeper or Zeobit, so I opened Firefox and did a few searches while Safari is obviously still stuck, waiting for me to click the sneaky OK button in the dialog window. Anyhow, at least the first few pages of most search results contain lots of blabbering from questionable witnesses about how MacKeeper saved them from some malware or spyware. However, any company that is hacking the browser to maliciously install their product is itself the criminal and not providing a true security application. So, there are three questions here: How can I close this window? Can I do something to Safari to avoid these hacks in the future? (Just curious) Is MacKeeper or Zeobit somehow loading the search results so that no information about their application being malware or spyware is listed (I can't be the only person in the world that is offended by their tactics, even though it appears I am)?

  Read the article

• Enterprise class storage best practices

  - by churnd

  One thing that has always perplexed me is storage best practices. Filesystems brag about how they can be petabytes or exabytes in size. Yet, I do not know many sysadmins who are willing to let a single volume grow over several terrabytes. I do know the primary reason behind this is how long it would take to rebuild the array should a drive fail. The more drives in a single LUN, the longer this takes and the greater your risk of losing another drive while the rebuild is taking place. Then there's usage reasons. Admins will carve out a LUN based on how much space they think needs to be allocated to the project. It seems more practical to me for the LUN to be one large array and to use quotas. I understand this wouldn't satisfy every requirement (iSCSI), but I see a lot of NAS systems (NFS) managed this way. I also understand that the underlying volumes can be grown/shrunk as needed quite easily, but wouldn't it be less "risky" to use quotas rather than manipulating volumes and bringing possible data loss into the equation? There may be some other reasons I'm missing, so please enlighten me. Can we not expect filesystems to ever be so large? Are we waiting for the hardware to get faster to cut down on rebuild times?

  Read the article

• Upstart can't determine my process' pid

  - by sirlark

  I'm writing an upstart script for a small service I've written for my colleagues. My upstart job can start the service, but when it does it only outputs queryqueue start/running; note the lack of a pid as given for other services. #/etc/init/queryqueue.conf description "Query Queue Daemon" author "---" start on started mysql stop on stopping mysql expect fork env DEFAULTFILE=/etc/default/queryqueue umask 007 kill timeout 30 pre-start script #if [ -f "$DEFAULTFILE" ]; then # . "$DEFAULTFILE" #fi [ ! -f /var/run/queryqueue.sock ] || rm -rf /var/run/queryqueue.sock #exec /usr/local/sbin/queryqueue -s /var/run/queryqueue.sock -d -l /tmp/upstart.log -p $PIDFILE -n $NUM_WORKERS $CLEANCACHE $FLUSHCACHE $CACHECONN end script script #Originally this stanza didn't exist at all if [ -f "$DEFAULTFILE" ]; then . "$DEFAULTFILE" fi exec /usr/local/sbin/queryqueue -s /var/run/queryqueue.sock -d -l /tmp/upstart.log -p $PIDFILE -n $NUM_WORKERS $CLEANCACHE $FLUSHCACHE $CACHECONN end script post-start script for i in `seq 1 5` ; do [ -S /var/run/queryqueue.sock ] && exit 0 sleep 1 done exit 1 end script The service in question is a python script, which when run without error, forks using the code below right after checking command line options and basic environmental sanity, so I tell upstart to expect fork. pid = os.fork() if pid != 0: sys.exit(0) The script is executable, and has a python shebang. I can send the TERM signal to the process manually, and it quits gracefully. But running stop queryqueue claims queryqueue stop/waiting but the process is still alive and well. Also, it's logs indicate it never received the kill signal. I'm guessing this is because upstart doesn't know which pid it has. I've also tried expect daemon and leaving the expect clause out entirely, but there's no change in behaviour. How can I get upstart to determine the pid of the exec'd process

  Read the article

• Server freezes while installing Redhat Enterprise Linux Server 6

  - by eisaacson

  We've tried both the first options Install or upgrade an existing system Install system with basic video driver When trying option #1, it gets to a screen that has a solid cursor about halfway down, then freezes. When trying option #2, it freezes at the point where it says: Waiting for hardware to initialize... Of course, we bought the unsupported version and haven't found anything to help us so far. Here are the specs to the server in the original post: ASUS P8Z68-M Pro LGA 1155 Intel Z68 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard with UEFI BIOS RAIDMAX Reiter ATX-305WBP Black Steel / Plastic ATX Mid Tower Computer Case 450W Power Supply Intel Core i7-2600 Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 2000 BX80623I72600 16GB Ram OCZ Agility 3 SSD 120GB From some of the posts out there could the UEFI Bios or the Sandy Bridge processor be a culprit here? We just tried the DVD on a different computer and it got past that point with ease. It's a standard Dell build compared to our custom machine. Could it be having difficulty recognizing drivers? How do we get past that?

  Read the article

• Windows Server 2008 can't start postgresql-x64-9.0 service: could not create any TCP/IP sockets

  - by Rob

  After rebooting a Windows Server 2008 machine to apply system updates, we recently we began having some issues running PostgreSQL 9.0. When we noticed the problem, we reverted the Windows updates, but the issue persists: From services.msc, attempting to start the postgresql-x64-9.0 service fails. Half-way through starting the progress bar becomes very slow, and eventually responds with error 1053; "the service did not respond in a timely fashion." Interestingly enough, bringing up the task manager shows multiple instances of postgres.exe have been started, and looking at the log file shows: 2011-02-10 14:44:02 ESTLOG: database system is ready to accept connections I then tried killing the processes, and starting via the command-line (as the user postgres), but I receive a different error: C:/Program Files/PostgreSQL/9.0/bin/pg_ctl.exe start -N "postgresql-x64-9.0" -D "F:/SHARE/postgres" -w waiting for server to start............................................................... pg_ctl: could not start server ESTWARNING: could not create listen socket for "192.168.0.101" ESTFATAL: could not create any TCP/IP sockets The log file again indicates that the database is ready to accept connections. Also, using netstat indicates that no other processes are using port 5432; I can't think of any other obvious reason that opening the listen socket might fail. Any help would be greatly appreciated.

  Read the article

• High latency due to non-presence of a transit provider in my country

  - by nixnotwin

  My ISP, a state owned incumbent, buys bandwidth from different transit providers. Whenever it buys transits it announces only a specific prefix (in most cases a hitherto unused) through the new transit AS. For e.g. if it runs out of bandwidth, it buys bandwidth from a new transit and announces a new prefix through it, while the same prefix is not announced (or announced with lowest metrics, so that the routes are very rarely used) via the old transits which continue to provide bandwidth to it. I am a business customer, so I have a fiber based link to the ISP and a tiny subnet is given to me. The subnet which is provide to me is part of a prefix which is announced by the AS of a transit who, it seems, do not have a presence in my country. So when I do a trace the packets, when they leave my ISP's AS, they take about 275ms to reach the transit providers core router, which is located in USA (half the world away). Also for upstream traffic my ISP uses a transit provider (tier 1) who has a presence in my country. But the return path is always through the transit which is in USA. So, average latency is 400ms. All the users of other ISPs in my country discover my subnet via USA. Even the traffic from neighboring countries, from Europe (which is much nearer) follows the path via USA. Sites using CDNs also resolve to ips in USA. I have informed the ISP NOC about the issue and I have asked them to provide an ip subnet belonging to a prefix announced by a local transit (preferably a tier 1 transit provider) and I am waiting for a reply. My question: Is it a serious issue that I must follow up to get it resolved? When I compared the latency on other providers in my country, it is, in most cases, less than half of my ISPs latency. Why my ISP doesn't announce all its prefixes to all of its transit providers, so that the packets can take efficient and nearest routes to reach prefixes that originate within its network?

  Read the article

• Dell XPS 1530 DVD-RW firmware problem

  - by josecortesp

  Hello everyone. I have this XPS laptop since a year and a half ago. About 2 months ago, with the waranty expired, i tried to run the optiarc slot load DVD-RW firmware update, and said everything was okay. Then I restarted it and the problem started: Now, every single time I turn on my computer, it get stuck at the BIOS POST until the drive sounds like "ready" and then the computer starts normally. And this happen EXACTLY the same when it's getting back from sleep. I'm pretty sure is not a software issue, because I tried with Vista Home Premiun 32 bits, Ubuntu (from 8.10+)32 & 64, and with W7 64. Already tried to run the firmware installer like a million time, in case it is a failing install with no luck. Also, google it to see if someone has the same problem, and again, no. The Drive performs pretty okay once the System is on, but waiting to the drive to be ready everytime is really annoying. The Firmware I updated was this, and the drive is: K937C Assembly, Dvd+/-rw, 8, SLOT, 1530 Sony Nec Optiarc Inc. I'll apreciate any help you can give me

  Read the article

• How to find out what is causing a slow down of the application on this server?

  - by Jan P.

  This is not the typical serverfault question, but I'm out of ideas and don't know where else to go. If there are better places to ask this, just point me there in the comments. Thanks. Situation We have this web application that uses Zend Framework, so runs in PHP on an Apache web server. We use MySQL for data storage and memcached for object caching. The application has a very unique usage and load pattern. It is a mobile web application where every full hour a cronjob looks through the database for users that have some information waiting or action to do and sends this information to a (external) notification server, that pushes these notifications to them. After the users get these notifications, the go to the app and use it, mostly for a very short time. An hour later, same thing happens. Problem In the last few weeks usage of the application really started to grow. In the last few days we encountered very high load and doubling of application response times during and after the sending of these notifications (so basically every hour). The server doesn't crash or stop responding to requests, it just gets slower and slower and often takes 20 minutes to recover - until the same thing starts again at the full hour. We have extensive monitoring in place (New Relic, collectd) but I can't figure out what's wrong; I can't find the bottlekneck. That's where you come in: Can you help me figure out what's wrong and maybe how to fix it? Additional information The server is a 16 core Intel Xeon (8 cores with hyperthreading, I think) and 12GB RAM running Ubuntu 10.04 (Linux 3.2.4-20120307 x86_64). Apache is 2.2.x and PHP is Version 5.3.2-1ubuntu4.11. If any configuration information would help analyze the problem, just comment and I will add it. Graphs info phpinfo() apc status memcache status collectd Processes CPU Apache Load MySQL Vmem Disk New Relic Application performance Server overview Processes Network Disks (Sorry the graphs are gifs and not the same time period, but I think the most important info is in there)

  Read the article

• Exchange 2010 issuing NDRs to Hotmail/Live & few other domains on receipt of message

  - by John Patrick Dandison

  I'm working through a beast of an issue at the moment. Exchange 2010 single server on prem Hybrid deployment to Office 365 ESMTP filtering turned off on ASA Certain domains (most consistently, Hotmail/Live) cannot send us mail. At one point, we couldn't send out either, but I created a new Send Connector that forces HELO instead of EHLO. I turned on SMTP logging, an example of the failed inbound message connection is below. I've read that it could be that reverse DNS is the problem, i.e., the exchange banner smtp address needs to reverse-DNS back to the same IP. Since it's the default exchange connector, its banner is the server's name, but the DNS name of the MX record is different. I'm waiting for the PTR records to update to reflect the internal name as well. Is that the right direction? Is this all DNS or something different? SMTP Session Log (single failed session for illustration): SMTPSubmit SMTPAcceptAnySender SMTPAcceptAuthoritativeDomainSender AcceptRoutingHeaders 220 ExchangeServerName.internalSubDomain.example.com Microsoft ESMTP MAIL Service ready at Mon, 15 Oct 2012 09:57:24 -0400 EHLO col0-omc3-s4.col0.hotmail.com 250-ExchangeServerName.internalSubDomain.example.com Hello [65.55.34.142] 250-SIZE 250-PIPELINING 250-DSN 250-ENHANCEDSTATUSCODES 250-STARTTLS 250-X-ANONYMOUSTLS 250-AUTH NTLM LOGIN 250-X-EXPS GSSAPI NTLM 250-8BITMIME 250-BINARYMIME 250-CHUNKING 250-XEXCH50 250-XRDST 250 XSHADOW MAIL FROM:<[email protected]> 08CF5268DABBD9AA;2012-10-15T13:57:24.564Z;1 250 2.1.0 Sender OK RCPT TO:<[email protected]> 250 2.1.5 Recipient OK XXXX 1282 LAST Tarpit for '0.00:00:05' 500 5.3.3 Unrecognized command XXXXXXXXX from COL002-W38 ([65.55.34.135]) by col0-omc3-s4.col0.hotmail.com with Microsoft SMTPSVC(6.0.3790.4675); Tarpit for '0.00:00:05' 500 5.3.3 Unrecognized command " XXXX 15 Oct 2012 06:57:24 -0700" Tarpit for '0.00:00:05' 500 5.3.3 Unrecognized command XXXXXXXXXXX <[email protected]> Tarpit for '0.00:00:05'

  Read the article

• Windows 7 loses correct time zone upon reboot

  - by Android Eve

  I have a standard PC running Windows 7 Ultimate (64-bit). For some reason, it refuses to keep the correct time zone (the BIOS battery is OK) when restarted. Note (1): The Time zone is correct. The "Internet Time" tab also shows "this computer is set to automatically synchronize with 'time.windows.com'. When I click the 'Change settings...' button, the 'Synchronize with an Internet time server' checkbox is checked. Still, upon reboot, the time is skewed by 6 hours... and doesn't correct itself even after waiting hours for this "automatically synchronize" to occur. Note (2): The BIOS time is set to local (i.e. not UTC). When I restart Windows 7 without booting to the other OS installed in dual-boot config (Ubuntu Linux), it seems to correctly remember the time. This may explain immediate time upon reboot, but it doesn't explain why Windows 7 won't automatically 'Synchronize with an Internet time server' even after an hour. Why is this happening and how do I correct this?

  Read the article

• Load is 0, yet site crawls (sometimes). What gives?

  - by Yegor

  I have a ~1.5-2mil page views per day site running on 2 servers. One for mysql, other for everything else. Mysql box has a load of 3, frontend is usually 0.0-0.1. Both are dual quad core with 8GB ram running SAS drives in raid5. CPU is idle for majority of the time, iowait is non-existent. Im running nginx, memcache, and site is built on php. Half the time everything runs perfect, while at other times it lags something severe, when it takes 10-15 seconds for a page to load. Page execution time is always super low, but it seems to hang, waiting for something before it actually loads the page. Whats even more weird is that it only happens to 1 file on the site (but its the one thats most commonly accessed, that actually loads the content on the site). Other pages are super fast at all times, even when it takes 15 seconds to load actual content. I have nginx_stats plugin installed, and if I monitor it, the lag spikes happen when the write column starts going above 100, and it frequently does... all the way to 500-1000. It does so at totally random times... not when traffic is heavy... it can do this in the middle of the night, and work perfectly at 5pm when traffic is at its highest. Any ideas?

  Read the article

• Windows Server 2008 R2 running at a snail's pace

  - by Django Reinhardt

  Really weird problem here. Our main web server has started running at a snail's pace, for absolutely no reason we can discern. Even after restarting the machine, when there's no little or no ram usage and CPU usage is fluctuating between 0 and 30%, simple tasks, like opening Internet Explorer, or waiting for My Computer to open, take forever. There are no processes hogging system resources that we can see... the machine itself is just exhibiting extremely slow behaviour. I've never seen a machine do this. A lot of security updates had built up, so we decided to let Windows install them. When we looked through the history upon restarting, though, they had failed with error code 800706BA. I don't know if this could be related or not. Any help in this matter would be greatly appreciated. As mentioned in the title, we're running a Windows Server 2008 R2 machine. It's also running SQL Server and IIS. It has 16GB of RAM and a decent Quad Core processor. It's also been fine until now -- and we haven't changed a thing. Thanks for any help.

  Read the article

• Failing to load rootfs: Ubuntu 10 + grub2 + rootfs ext4 w/ RAID1

  - by James

  I am having problems booting a new Ubuntu 10 (server) install. My primary HD (/dev/sda) is laid out as follows: Device Boot Start End Blocks Id System /dev/sda1 * 1 18 144553+ 83 Linux <-- /BOOT /dev/sda2 19 182401 1464991447+ 5 Extended /dev/sda5 19 2207 17583111 fd Linux raid autodetect /dev/sda6 2208 11934 78132096 fd Linux raid autodetect <-- / (ROOTFS) /dev/sda7 11935 182401 1369276146 fd Linux raid autodetect The rootfs is part of a RAID1 (software) array (currently degraded): # cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md2 : active raid1 sda6[1] 78132032 blocks [2/1] [_U] The UUIDs for the partitions are as follows: # blkid /dev/sda1 /dev/sda1: UUID="b25dd301-41b9-4f4d-9b0a-0e31713dd74c" TYPE="ext2" # blkid /dev/sda6 /dev/sda6: UUID="af7b9ede-fa53-c0c1-74be-31ec752c5cd5" TYPE="linux_raid_member" # blkid /dev/md2 /dev/md2: UUID="a0602d42-6855-482f-870c-6f6ecdcdae3f" TYPE="ext4" Finally, I have my grub2 menuentry setup as follows: ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.32-25-server' --class ubuntu --class gnu-linux --class gnu --class os { insmod ext2 insmod raid insmod mdraid set root='(hd0,1)' search --no-floppy --fs-uuid --set b25dd301-41b9-4f4d-9b0a-0e31713dd74c linux /vmlinuz-2.6.32-25-server root=UUID=a0602d42-6855-482f-870c-6f6ecdcdae3f ro nosplash noplymouth initrd /initrd.img-2.6.32-25-server } When I attempt to boot, grub loads OK, however I eventually get the following error message: Gave up waiting for root device. ALERT /dev/disk/by-uuid/a0602d42-6855-482f-870c-6f6ecdcdae3f does not exist. Dropping to a shell! If from the grub bootloader I open a grub command line, I can ls (hd0,) and it lists the correct partitions with the UUIDs as shown above - sda6 shows 'a0602d42-6855-482f-870c-6f6ecdcdae3f' (the RAID UUID). If I ls (md2)/ it properly lists all the files on the RAID1 filesystem (ext4) so it doesn't appear to be an issue accessing the raid device. Does anyone have any suggestions as to what the problem might be? I can't figure this one out.

  Read the article

• GVIM hangs when saving through GVFS' FTP

  - by Lie Ryan

  I loved Gnome's Nautilus and FTP integration and being able to mount a remote FTP directory as a regular bookmark/directory, and double clicking any remote files to open in any unmodified program. I also loved editing text files with GVim. However, if I double clicked file on Nautilus to open a text file in Gvim, then saving a file will take about 10 seconds and GVim will hang for that amount of time. The major irritant is that I cannot continue editing while the text editor is waiting for the write to finish, this delay interrupted my workflow and thought process and saving becomes a painful process. The other problem is that I don't think simply uploading a file should take that much time. I'm aware of GVim's internal FTP support, but they are not as well integrated with Nautilus's FTP. So a few question: Is there a way to make GVim or GVFS to save in background while I continue editing? Why is GVFS so slow? Is there any way to set GVFS to use a single persistent FTP connection instead of creating a new FTP connection each time? I'm on Gentoo Linux x86-64.

  Read the article

• TOR Proxy / Vidalia "New Identity" button not working

  - by Yisman

  I need to hide my ip from time to time. In Vidalia, I click on "New Identity". Ihen I check http://myip.ozymo.com/ to see if my IP address has changed. But, no, it hasn't. Why is that? And how can this be fixed? I tried waiting till the button gets re-enabled to make sure that its done processing the command, but still the IP address is the same. In Fiddler each request is tracked, so it's not a cached response. It's re-requested, but simply does not change. Fiddler though does show one thing interesting. Here is the raw response of many of the requests: HTTP/1.1 200 OK Content-Length: 13 Date: Mon, 23 May 2011 12:02:57 GMT Server: Apache X-Powered-By: PHP/5.2.14 Content-Type: text/html; charset=UTF-8 Age: 1 Connection: keep-alive **Warning: 110 localhost:8118 Object is stale** 26.32.120.106 What is this warning? And is this the cause?

  Read the article

• Permission Denied for FTP User

  - by Alasdair

  I have an FTP user whose default is /root/ftpuser This user can login fine. The user is the owner of the directory & the directory is even set to 777 permissions. But the user can't upload anything, the display is: Status: Connecting to xx.xxx.xxx.xx:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 2 of 50 allowed. Response: 220-Local time is now 05:12. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER ftpuser Response: 331 User ftpuser OK. Password required Command: PASS ********* Response: 230 OK. Current restricted directory is / Command: OPTS UTF8 ON Response: 200 OK, UTF-8 enabled Status: Connected Status: Starting upload of test.html Command: CWD / Response: 550 Can't change directory to /: Permission denied Command: MKD / Response: 550 Can't create directory: Permission denied Command: CWD / Response: 550 Can't change directory to /: Permission denied Command: SIZE /btn.png Response: 550 Can't check for file existence Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (66,232,106,33,52,218) Command: STOR /test.html Response: 553 Can't open that file: Permission denied Error: Critical file transfer error It's a Linux CentOS 6 server. Any ideas?

  Read the article

• Using NFS for scalable PHP/MySQL web application

  - by Jeroen Moons

  Here's the situation: I have a PHP/MySQL web application that accepts user uploads (pdf files). From these pdf files' pages a preview image is made on the fly and presented to the web app's users. Some pdfs might be on the large side, most will be under 50 MB but some extreme cases could be as large as a few hundred MB. A little waiting for the preview image for large pdf files is acceptable but no more than a minute let's say. Everything is running on one server for now, but soon the app will hit the server's limit on both storage and processing power. My idea to solve the problem: To deal with this situation I had the idea of having one or more pdf processing servers as needed, and one or more file storage servers. These two types of servers are mounted to the server on which the actual app runs using NFS. The app could then use GearMan to delegate pdf processing tasks to these processing servers. The processing server can mount the storage server and read the file stored there, process it and write its output to that server. The servers I'm talking about will be amazon ec2 instances. The web app returns a link to the resulting pdf preview image on the storage server that was used which can then be used on the front end to show the image to the user. My question: I have zero experience with apps that use multiple servers, is this idea viable or is there a better way to do it? Is an NFS setup fast and reliable enough for this situation?

  Read the article

• Percona-server time out on /etc/init.d/mysql start

  - by geekmenot

  Every time I start mysql, using /etc/init.d/mysql start or service mysql start, it always times out. * Starting MySQL (Percona Server) database server mysqld [fail] However, I can get into mysql. Just wanted to know if there is a problem with the install because it happens all the time, not a one off error. mysql-error.log shows: 121214 11:25:56 mysqld_safe Starting mysqld daemon with databases from /data/mysql/ 121214 11:25:56 [Note] Plugin 'FEDERATED' is disabled. 121214 11:25:56 InnoDB: The InnoDB memory heap is disabled 121214 11:25:56 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121214 11:25:56 InnoDB: Compressed tables use zlib 1.2.3 121214 11:25:56 InnoDB: Using Linux native AIO 121214 11:25:56 InnoDB: Initializing buffer pool, size = 14.0G 121214 11:25:58 InnoDB: Completed initialization of buffer pool 121214 11:26:01 InnoDB: Waiting for the background threads to start 121214 11:26:02 Percona XtraDB (http://www.percona.com) 1.1.8-rel29.2 started; log sequence number 9333955393950 121214 11:26:02 [Note] Server hostname (bind-address): '0.0.0.0'; port: 3306 121214 11:26:02 [Note] - '0.0.0.0' resolves to '0.0.0.0'; 121214 11:26:02 [Note] Server socket created on IP: '0.0.0.0'. 121214 11:26:02 [Note] Slave SQL thread initialized, starting replication in log 'mysql-bin.005163' at position 624540946, relay log '/data/mysql/mysql-relay-bin.000043' position: 624541092 121214 11:26:02 [Note] Slave I/O thread: connected to master '[email protected]:3306',replication started in log 'mysql-bin.005180' at position 823447620 121214 11:26:02 [Note] Event Scheduler: Loaded 0 events 121214 11:26:02 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.5.28-29.2-log' socket: '/data/mysql/mysql.sock' port: 3306 Percona Server (GPL), Release 29.2

  Read the article

• How do I fix error 1303 during TI Connect install?

  - by smoth190

  I recently purchased a TI-84 Plus graphing calculator, and I'm trying install the TI Connect software in order to connect the calculator to my computer via the USB cable. Unfortunately, I'm getting this error while trying to install the program: Error 1303. The installation has insufficient privileges to access this directory: E:\Data\Timothy\Documents\MyTIData. The installation cannot continue. Log on as administrator or contact your system administrator. However, my account is the only account on my PC, and it has administrative privileges. I've also tried running the installer with Run as Administrator, but with no luck. If I create the folder MyTIData manually, I receive this error: Error 1317. An error occurred while attempting to create the directory: E:\Data\Timothy\Documents\MyTIData I've reapplied the security settings to the E:\Data folder (and all its sub-directories) to Full for my account. I've also gone into Computer Management, and given SYSTEM full privileges for the entire disk. I've also logged out, logged back in, restarted, etc. but still, no luck. Now, I should mention that my Documents folder is not at the default location. I changed it due to my C: disk being a 90GB SSD, so I moved all my personal data onto the extra storage disk (which is ~1TB). I don't know if that is causing the issue, but it can't hurt throwing it out there. So why can't I install this program? Google'ing the problem brings up this error for various other installers (such as Visual Studio and Microsoft Office), but nothing for TI Connect. All the solutions are the same: Give the folder Full privileges...but I've already done this! I've also tried running the installer with and without the calculator plugged in, but it didn't change anything. In the prompt that contains the error, repeatedly clicking Retry or waiting a few moments before clicking Retry also produces no result.

  Read the article

• Linux Startup Script after Gnome Login

  - by Eric

  I have a Fedora server that I want to spawn an interactive python script after the user logs on. This script will ask the user for various types of information for configuring the system or it will search for the previous config file and show them the predefined information. Originally I was going to put this in rc.local or make it run with init.d but that messed up the boot due to how the script is spawned. So I would like this script to run as soon as the user logs in to Gnome. I've searched around quite a bit and found this answer which appears to be exactly what I want, but it isn't working the way I want it to. Below is my entry. [Desktop Entry] Name=MyScript GenericName=Script for initial configuration Comment=I really want this to work Exec=/usr/local/bin/myscript.sh Terminal=true Type=Application X-GNOME-Autostart-enabled=true Whenever I login, nothing happens. So I then did a test to modified "myscript.sh" to just echo some text to a file and it worked fine. So it appears the portion that isn't working is the script popping open a terminal and waiting for the users input. Are there any additional options I need to add to make this work? I can confirm when I run /usr/local/bin/myscript.sh from the CLI it works fine. I have also tried adding "StartupNotify=true" and still no luck. Edit @John - I tried moving my Exec= to /usr/local/bin/myscript-test and this is what myscript-test contains. #!/bin/bash xterm -e /usr/local/bin/myscript.sh Yet again, when I just run the myscript-test it works fine. However when I put that in my autostart, nothing happens. Edit 2 - I did a few more tests and it did start working but I had to remove Terminal=True before the xterm would pop. Thanks for your help.

  Read the article

• MongoDB data directory transfer and upgrade

  - by KPL

  I just transferred my data directory (of Mongo 1.6.5) to a new server and installed Mongo 2.0 on it. I set the data directory path and did sudo server mongod restart. It failed, and the log file output says this - ***** SERVER RESTARTED ***** Sun Oct 9 07:51:47 [initandlisten] MongoDB starting : pid=8224 port=27017 dbpath=/database/mongodb 64-bit host=domU-12-31-39-09-35-81 Sun Oct 9 07:51:47 [initandlisten] db version v2.0.0, pdfile version 4.5 Sun Oct 9 07:51:47 [initandlisten] git version: 695c67dff0ffc361b8568a13366f027caa406222 Sun Oct 9 07:51:47 [initandlisten] build info: Linux bs-linux64.10gen.cc 2.6.21.7-2.ec2.v1.2.fc8xen #1 SMP Fri Nov 20 17:48:28 EST 2009 x86_64 BOOST_LIB_VERSION=1_41 Sun Oct 9 07:51:47 [initandlisten] options: { auth: "true", config: "/etc/mongod.conf", dbpath: "/database/mongodb", fork: "true", logappend: "true", logpath: "/var/log/mongo/mongod.log", nojournal: "true" } Sun Oct 9 07:51:47 [initandlisten] couldn't open /database/mongodb/local.ns errno:1 Operation not permitted Sun Oct 9 07:51:47 [initandlisten] error couldn't open file /database/mongodb/local.ns terminating Sun Oct 9 07:51:47 dbexit: Sun Oct 9 07:51:47 [initandlisten] shutdown: going to close listening sockets... Sun Oct 9 07:51:47 [initandlisten] shutdown: going to flush diaglog... Sun Oct 9 07:51:47 [initandlisten] shutdown: going to close sockets... Sun Oct 9 07:51:47 [initandlisten] shutdown: waiting for fs preallocator... Sun Oct 9 07:51:47 [initandlisten] shutdown: closing all files... Sun Oct 9 07:51:47 [initandlisten] closeAllFiles() finished Sun Oct 9 07:51:47 [initandlisten] shutdown: removing fs lock... Sun Oct 9 07:51:47 dbexit: really exiting now I have already run it with --upgrade once.

  Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >